ui: correctly reset framebuffer update state after processing dirty regions
[qemu/ar7.git] / hw / timer / mc146818rtc.c
blob35a05a64cc6f40e9a05e5aa429248f33f6c4913d
1 /*
2 * QEMU MC146818 RTC emulation
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "qemu/osdep.h"
25 #include "qemu/cutils.h"
26 #include "qemu/bcd.h"
27 #include "hw/hw.h"
28 #include "qemu/timer.h"
29 #include "sysemu/sysemu.h"
30 #include "sysemu/replay.h"
31 #include "hw/timer/mc146818rtc.h"
32 #include "qapi/visitor.h"
33 #include "qapi-event.h"
34 #include "qmp-commands.h"
36 #ifdef TARGET_I386
37 #include "hw/i386/apic.h"
38 #endif
40 //#define DEBUG_CMOS
41 //#define DEBUG_COALESCED
43 #ifdef DEBUG_CMOS
44 # define CMOS_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
45 #else
46 # define CMOS_DPRINTF(format, ...) do { } while (0)
47 #endif
49 #ifdef DEBUG_COALESCED
50 # define DPRINTF_C(format, ...) printf(format, ## __VA_ARGS__)
51 #else
52 # define DPRINTF_C(format, ...) do { } while (0)
53 #endif
55 #define SEC_PER_MIN 60
56 #define MIN_PER_HOUR 60
57 #define SEC_PER_HOUR 3600
58 #define HOUR_PER_DAY 24
59 #define SEC_PER_DAY 86400
61 #define RTC_REINJECT_ON_ACK_COUNT 20
62 #define RTC_CLOCK_RATE 32768
63 #define UIP_HOLD_LENGTH (8 * NANOSECONDS_PER_SECOND / 32768)
65 #define MC146818_RTC(obj) OBJECT_CHECK(RTCState, (obj), TYPE_MC146818_RTC)
67 typedef struct RTCState {
68 ISADevice parent_obj;
70 MemoryRegion io;
71 uint8_t cmos_data[128];
72 uint8_t cmos_index;
73 int32_t base_year;
74 uint64_t base_rtc;
75 uint64_t last_update;
76 int64_t offset;
77 qemu_irq irq;
78 int it_shift;
79 /* periodic timer */
80 QEMUTimer *periodic_timer;
81 int64_t next_periodic_time;
82 /* update-ended timer */
83 QEMUTimer *update_timer;
84 uint64_t next_alarm_time;
85 uint16_t irq_reinject_on_ack_count;
86 uint32_t irq_coalesced;
87 uint32_t period;
88 QEMUTimer *coalesced_timer;
89 Notifier clock_reset_notifier;
90 LostTickPolicy lost_tick_policy;
91 Notifier suspend_notifier;
92 QLIST_ENTRY(RTCState) link;
93 } RTCState;
95 static void rtc_set_time(RTCState *s);
96 static void rtc_update_time(RTCState *s);
97 static void rtc_set_cmos(RTCState *s, const struct tm *tm);
98 static inline int rtc_from_bcd(RTCState *s, int a);
99 static uint64_t get_next_alarm(RTCState *s);
101 static inline bool rtc_running(RTCState *s)
103 return (!(s->cmos_data[RTC_REG_B] & REG_B_SET) &&
104 (s->cmos_data[RTC_REG_A] & 0x70) <= 0x20);
107 static uint64_t get_guest_rtc_ns(RTCState *s)
109 uint64_t guest_clock = qemu_clock_get_ns(rtc_clock);
111 return s->base_rtc * NANOSECONDS_PER_SECOND +
112 guest_clock - s->last_update + s->offset;
115 static void rtc_coalesced_timer_update(RTCState *s)
117 if (s->irq_coalesced == 0) {
118 timer_del(s->coalesced_timer);
119 } else {
120 /* divide each RTC interval to 2 - 8 smaller intervals */
121 int c = MIN(s->irq_coalesced, 7) + 1;
122 int64_t next_clock = qemu_clock_get_ns(rtc_clock) +
123 periodic_clock_to_ns(s->period / c);
124 timer_mod(s->coalesced_timer, next_clock);
128 static QLIST_HEAD(, RTCState) rtc_devices =
129 QLIST_HEAD_INITIALIZER(rtc_devices);
131 #ifdef TARGET_I386
132 void qmp_rtc_reset_reinjection(Error **errp)
134 RTCState *s;
136 QLIST_FOREACH(s, &rtc_devices, link) {
137 s->irq_coalesced = 0;
141 static bool rtc_policy_slew_deliver_irq(RTCState *s)
143 apic_reset_irq_delivered();
144 qemu_irq_raise(s->irq);
145 return apic_get_irq_delivered();
148 static void rtc_coalesced_timer(void *opaque)
150 RTCState *s = opaque;
152 if (s->irq_coalesced != 0) {
153 s->cmos_data[RTC_REG_C] |= 0xc0;
154 DPRINTF_C("cmos: injecting from timer\n");
155 if (rtc_policy_slew_deliver_irq(s)) {
156 s->irq_coalesced--;
157 DPRINTF_C("cmos: coalesced irqs decreased to %d\n",
158 s->irq_coalesced);
162 rtc_coalesced_timer_update(s);
164 #else
165 static bool rtc_policy_slew_deliver_irq(RTCState *s)
167 assert(0);
168 return false;
170 #endif
172 static uint32_t rtc_periodic_clock_ticks(RTCState *s)
174 int period_code;
176 if (!(s->cmos_data[RTC_REG_B] & REG_B_PIE)) {
177 return 0;
180 period_code = s->cmos_data[RTC_REG_A] & 0x0f;
182 return periodic_period_to_clock(period_code);
186 * handle periodic timer. @old_period indicates the periodic timer update
187 * is just due to period adjustment.
189 static void
190 periodic_timer_update(RTCState *s, int64_t current_time, uint32_t old_period)
192 uint32_t period;
193 int64_t cur_clock, next_irq_clock, lost_clock = 0;
195 period = rtc_periodic_clock_ticks(s);
197 if (period) {
198 /* compute 32 khz clock */
199 cur_clock =
200 muldiv64(current_time, RTC_CLOCK_RATE, NANOSECONDS_PER_SECOND);
203 * if the periodic timer's update is due to period re-configuration,
204 * we should count the clock since last interrupt.
206 if (old_period) {
207 int64_t last_periodic_clock, next_periodic_clock;
209 next_periodic_clock = muldiv64(s->next_periodic_time,
210 RTC_CLOCK_RATE, NANOSECONDS_PER_SECOND);
211 last_periodic_clock = next_periodic_clock - old_period;
212 lost_clock = cur_clock - last_periodic_clock;
213 assert(lost_clock >= 0);
217 * s->irq_coalesced can change for two reasons:
219 * a) if one or more periodic timer interrupts have been lost,
220 * lost_clock will be more that a period.
222 * b) when the period may be reconfigured, we expect the OS to
223 * treat delayed tick as the new period. So, when switching
224 * from a shorter to a longer period, scale down the missing,
225 * because the OS will treat past delayed ticks as longer
226 * (leftovers are put back into lost_clock). When switching
227 * to a shorter period, scale up the missing ticks since the
228 * OS handler will treat past delayed ticks as shorter.
230 if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
231 uint32_t old_irq_coalesced = s->irq_coalesced;
233 s->period = period;
234 lost_clock += old_irq_coalesced * old_period;
235 s->irq_coalesced = lost_clock / s->period;
236 lost_clock %= s->period;
237 if (old_irq_coalesced != s->irq_coalesced ||
238 old_period != s->period) {
239 DPRINTF_C("cmos: coalesced irqs scaled from %d to %d, "
240 "period scaled from %d to %d\n", old_irq_coalesced,
241 s->irq_coalesced, old_period, s->period);
242 rtc_coalesced_timer_update(s);
244 } else {
246 * no way to compensate the interrupt if LOST_TICK_POLICY_SLEW
247 * is not used, we should make the time progress anyway.
249 lost_clock = MIN(lost_clock, period);
252 assert(lost_clock >= 0 && lost_clock <= period);
254 next_irq_clock = cur_clock + period - lost_clock;
255 s->next_periodic_time = periodic_clock_to_ns(next_irq_clock) + 1;
256 timer_mod(s->periodic_timer, s->next_periodic_time);
257 } else {
258 s->irq_coalesced = 0;
259 timer_del(s->periodic_timer);
263 static void rtc_periodic_timer(void *opaque)
265 RTCState *s = opaque;
267 periodic_timer_update(s, s->next_periodic_time, 0);
268 s->cmos_data[RTC_REG_C] |= REG_C_PF;
269 if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
270 s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
271 if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
272 if (s->irq_reinject_on_ack_count >= RTC_REINJECT_ON_ACK_COUNT)
273 s->irq_reinject_on_ack_count = 0;
274 if (!rtc_policy_slew_deliver_irq(s)) {
275 s->irq_coalesced++;
276 rtc_coalesced_timer_update(s);
277 DPRINTF_C("cmos: coalesced irqs increased to %d\n",
278 s->irq_coalesced);
280 } else
281 qemu_irq_raise(s->irq);
285 /* handle update-ended timer */
286 static void check_update_timer(RTCState *s)
288 uint64_t next_update_time;
289 uint64_t guest_nsec;
290 int next_alarm_sec;
292 /* From the data sheet: "Holding the dividers in reset prevents
293 * interrupts from operating, while setting the SET bit allows"
294 * them to occur.
296 if ((s->cmos_data[RTC_REG_A] & 0x60) == 0x60) {
297 assert((s->cmos_data[RTC_REG_A] & REG_A_UIP) == 0);
298 timer_del(s->update_timer);
299 return;
302 guest_nsec = get_guest_rtc_ns(s) % NANOSECONDS_PER_SECOND;
303 next_update_time = qemu_clock_get_ns(rtc_clock)
304 + NANOSECONDS_PER_SECOND - guest_nsec;
306 /* Compute time of next alarm. One second is already accounted
307 * for in next_update_time.
309 next_alarm_sec = get_next_alarm(s);
310 s->next_alarm_time = next_update_time +
311 (next_alarm_sec - 1) * NANOSECONDS_PER_SECOND;
313 /* If update_in_progress latched the UIP bit, we must keep the timer
314 * programmed to the next second, so that UIP is cleared. Otherwise,
315 * if UF is already set, we might be able to optimize.
317 if (!(s->cmos_data[RTC_REG_A] & REG_A_UIP) &&
318 (s->cmos_data[RTC_REG_C] & REG_C_UF)) {
319 /* If AF cannot change (i.e. either it is set already, or
320 * SET=1 and then the time is not updated), nothing to do.
322 if ((s->cmos_data[RTC_REG_B] & REG_B_SET) ||
323 (s->cmos_data[RTC_REG_C] & REG_C_AF)) {
324 timer_del(s->update_timer);
325 return;
328 /* UF is set, but AF is clear. Program the timer to target
329 * the alarm time. */
330 next_update_time = s->next_alarm_time;
332 if (next_update_time != timer_expire_time_ns(s->update_timer)) {
333 timer_mod(s->update_timer, next_update_time);
337 static inline uint8_t convert_hour(RTCState *s, uint8_t hour)
339 if (!(s->cmos_data[RTC_REG_B] & REG_B_24H)) {
340 hour %= 12;
341 if (s->cmos_data[RTC_HOURS] & 0x80) {
342 hour += 12;
345 return hour;
348 static uint64_t get_next_alarm(RTCState *s)
350 int32_t alarm_sec, alarm_min, alarm_hour, cur_hour, cur_min, cur_sec;
351 int32_t hour, min, sec;
353 rtc_update_time(s);
355 alarm_sec = rtc_from_bcd(s, s->cmos_data[RTC_SECONDS_ALARM]);
356 alarm_min = rtc_from_bcd(s, s->cmos_data[RTC_MINUTES_ALARM]);
357 alarm_hour = rtc_from_bcd(s, s->cmos_data[RTC_HOURS_ALARM]);
358 alarm_hour = alarm_hour == -1 ? -1 : convert_hour(s, alarm_hour);
360 cur_sec = rtc_from_bcd(s, s->cmos_data[RTC_SECONDS]);
361 cur_min = rtc_from_bcd(s, s->cmos_data[RTC_MINUTES]);
362 cur_hour = rtc_from_bcd(s, s->cmos_data[RTC_HOURS]);
363 cur_hour = convert_hour(s, cur_hour);
365 if (alarm_hour == -1) {
366 alarm_hour = cur_hour;
367 if (alarm_min == -1) {
368 alarm_min = cur_min;
369 if (alarm_sec == -1) {
370 alarm_sec = cur_sec + 1;
371 } else if (cur_sec > alarm_sec) {
372 alarm_min++;
374 } else if (cur_min == alarm_min) {
375 if (alarm_sec == -1) {
376 alarm_sec = cur_sec + 1;
377 } else {
378 if (cur_sec > alarm_sec) {
379 alarm_hour++;
382 if (alarm_sec == SEC_PER_MIN) {
383 /* wrap to next hour, minutes is not in don't care mode */
384 alarm_sec = 0;
385 alarm_hour++;
387 } else if (cur_min > alarm_min) {
388 alarm_hour++;
390 } else if (cur_hour == alarm_hour) {
391 if (alarm_min == -1) {
392 alarm_min = cur_min;
393 if (alarm_sec == -1) {
394 alarm_sec = cur_sec + 1;
395 } else if (cur_sec > alarm_sec) {
396 alarm_min++;
399 if (alarm_sec == SEC_PER_MIN) {
400 alarm_sec = 0;
401 alarm_min++;
403 /* wrap to next day, hour is not in don't care mode */
404 alarm_min %= MIN_PER_HOUR;
405 } else if (cur_min == alarm_min) {
406 if (alarm_sec == -1) {
407 alarm_sec = cur_sec + 1;
409 /* wrap to next day, hours+minutes not in don't care mode */
410 alarm_sec %= SEC_PER_MIN;
414 /* values that are still don't care fire at the next min/sec */
415 if (alarm_min == -1) {
416 alarm_min = 0;
418 if (alarm_sec == -1) {
419 alarm_sec = 0;
422 /* keep values in range */
423 if (alarm_sec == SEC_PER_MIN) {
424 alarm_sec = 0;
425 alarm_min++;
427 if (alarm_min == MIN_PER_HOUR) {
428 alarm_min = 0;
429 alarm_hour++;
431 alarm_hour %= HOUR_PER_DAY;
433 hour = alarm_hour - cur_hour;
434 min = hour * MIN_PER_HOUR + alarm_min - cur_min;
435 sec = min * SEC_PER_MIN + alarm_sec - cur_sec;
436 return sec <= 0 ? sec + SEC_PER_DAY : sec;
439 static void rtc_update_timer(void *opaque)
441 RTCState *s = opaque;
442 int32_t irqs = REG_C_UF;
443 int32_t new_irqs;
445 assert((s->cmos_data[RTC_REG_A] & 0x60) != 0x60);
447 /* UIP might have been latched, update time and clear it. */
448 rtc_update_time(s);
449 s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
451 if (qemu_clock_get_ns(rtc_clock) >= s->next_alarm_time) {
452 irqs |= REG_C_AF;
453 if (s->cmos_data[RTC_REG_B] & REG_B_AIE) {
454 qemu_system_wakeup_request(QEMU_WAKEUP_REASON_RTC);
458 new_irqs = irqs & ~s->cmos_data[RTC_REG_C];
459 s->cmos_data[RTC_REG_C] |= irqs;
460 if ((new_irqs & s->cmos_data[RTC_REG_B]) != 0) {
461 s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
462 qemu_irq_raise(s->irq);
464 check_update_timer(s);
467 static void cmos_ioport_write(void *opaque, hwaddr addr,
468 uint64_t data, unsigned size)
470 RTCState *s = opaque;
471 uint32_t old_period;
472 bool update_periodic_timer;
474 if ((addr & 1) == 0) {
475 s->cmos_index = data & 0x7f;
476 } else {
477 CMOS_DPRINTF("cmos: write index=0x%02x val=0x%02" PRIx64 "\n",
478 s->cmos_index, data);
479 switch(s->cmos_index) {
480 case RTC_SECONDS_ALARM:
481 case RTC_MINUTES_ALARM:
482 case RTC_HOURS_ALARM:
483 s->cmos_data[s->cmos_index] = data;
484 check_update_timer(s);
485 break;
486 case RTC_IBM_PS2_CENTURY_BYTE:
487 s->cmos_index = RTC_CENTURY;
488 /* fall through */
489 case RTC_CENTURY:
490 case RTC_SECONDS:
491 case RTC_MINUTES:
492 case RTC_HOURS:
493 case RTC_DAY_OF_WEEK:
494 case RTC_DAY_OF_MONTH:
495 case RTC_MONTH:
496 case RTC_YEAR:
497 s->cmos_data[s->cmos_index] = data;
498 /* if in set mode, do not update the time */
499 if (rtc_running(s)) {
500 rtc_set_time(s);
501 check_update_timer(s);
503 break;
504 case RTC_REG_A:
505 update_periodic_timer = (s->cmos_data[RTC_REG_A] ^ data) & 0x0f;
506 old_period = rtc_periodic_clock_ticks(s);
508 if ((data & 0x60) == 0x60) {
509 if (rtc_running(s)) {
510 rtc_update_time(s);
512 /* What happens to UIP when divider reset is enabled is
513 * unclear from the datasheet. Shouldn't matter much
514 * though.
516 s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
517 } else if (((s->cmos_data[RTC_REG_A] & 0x60) == 0x60) &&
518 (data & 0x70) <= 0x20) {
519 /* when the divider reset is removed, the first update cycle
520 * begins one-half second later*/
521 if (!(s->cmos_data[RTC_REG_B] & REG_B_SET)) {
522 s->offset = 500000000;
523 rtc_set_time(s);
525 s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
527 /* UIP bit is read only */
528 s->cmos_data[RTC_REG_A] = (data & ~REG_A_UIP) |
529 (s->cmos_data[RTC_REG_A] & REG_A_UIP);
531 if (update_periodic_timer) {
532 periodic_timer_update(s, qemu_clock_get_ns(rtc_clock),
533 old_period);
536 check_update_timer(s);
537 break;
538 case RTC_REG_B:
539 update_periodic_timer = (s->cmos_data[RTC_REG_B] ^ data)
540 & REG_B_PIE;
541 old_period = rtc_periodic_clock_ticks(s);
543 if (data & REG_B_SET) {
544 /* update cmos to when the rtc was stopping */
545 if (rtc_running(s)) {
546 rtc_update_time(s);
548 /* set mode: reset UIP mode */
549 s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
550 data &= ~REG_B_UIE;
551 } else {
552 /* if disabling set mode, update the time */
553 if ((s->cmos_data[RTC_REG_B] & REG_B_SET) &&
554 (s->cmos_data[RTC_REG_A] & 0x70) <= 0x20) {
555 s->offset = get_guest_rtc_ns(s) % NANOSECONDS_PER_SECOND;
556 rtc_set_time(s);
559 /* if an interrupt flag is already set when the interrupt
560 * becomes enabled, raise an interrupt immediately. */
561 if (data & s->cmos_data[RTC_REG_C] & REG_C_MASK) {
562 s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
563 qemu_irq_raise(s->irq);
564 } else {
565 s->cmos_data[RTC_REG_C] &= ~REG_C_IRQF;
566 qemu_irq_lower(s->irq);
568 s->cmos_data[RTC_REG_B] = data;
570 if (update_periodic_timer) {
571 periodic_timer_update(s, qemu_clock_get_ns(rtc_clock),
572 old_period);
575 check_update_timer(s);
576 break;
577 case RTC_REG_C:
578 case RTC_REG_D:
579 /* cannot write to them */
580 break;
581 default:
582 s->cmos_data[s->cmos_index] = data;
583 break;
588 static inline int rtc_to_bcd(RTCState *s, int a)
590 if (s->cmos_data[RTC_REG_B] & REG_B_DM) {
591 return a;
592 } else {
593 return ((a / 10) << 4) | (a % 10);
597 static inline int rtc_from_bcd(RTCState *s, int a)
599 if ((a & 0xc0) == 0xc0) {
600 return -1;
602 if (s->cmos_data[RTC_REG_B] & REG_B_DM) {
603 return a;
604 } else {
605 return ((a >> 4) * 10) + (a & 0x0f);
609 static void rtc_get_time(RTCState *s, struct tm *tm)
611 tm->tm_sec = rtc_from_bcd(s, s->cmos_data[RTC_SECONDS]);
612 tm->tm_min = rtc_from_bcd(s, s->cmos_data[RTC_MINUTES]);
613 tm->tm_hour = rtc_from_bcd(s, s->cmos_data[RTC_HOURS] & 0x7f);
614 if (!(s->cmos_data[RTC_REG_B] & REG_B_24H)) {
615 tm->tm_hour %= 12;
616 if (s->cmos_data[RTC_HOURS] & 0x80) {
617 tm->tm_hour += 12;
620 tm->tm_wday = rtc_from_bcd(s, s->cmos_data[RTC_DAY_OF_WEEK]) - 1;
621 tm->tm_mday = rtc_from_bcd(s, s->cmos_data[RTC_DAY_OF_MONTH]);
622 tm->tm_mon = rtc_from_bcd(s, s->cmos_data[RTC_MONTH]) - 1;
623 tm->tm_year =
624 rtc_from_bcd(s, s->cmos_data[RTC_YEAR]) + s->base_year +
625 rtc_from_bcd(s, s->cmos_data[RTC_CENTURY]) * 100 - 1900;
628 static void rtc_set_time(RTCState *s)
630 struct tm tm;
632 rtc_get_time(s, &tm);
633 s->base_rtc = mktimegm(&tm);
634 s->last_update = qemu_clock_get_ns(rtc_clock);
636 qapi_event_send_rtc_change(qemu_timedate_diff(&tm), &error_abort);
639 static void rtc_set_cmos(RTCState *s, const struct tm *tm)
641 int year;
643 s->cmos_data[RTC_SECONDS] = rtc_to_bcd(s, tm->tm_sec);
644 s->cmos_data[RTC_MINUTES] = rtc_to_bcd(s, tm->tm_min);
645 if (s->cmos_data[RTC_REG_B] & REG_B_24H) {
646 /* 24 hour format */
647 s->cmos_data[RTC_HOURS] = rtc_to_bcd(s, tm->tm_hour);
648 } else {
649 /* 12 hour format */
650 int h = (tm->tm_hour % 12) ? tm->tm_hour % 12 : 12;
651 s->cmos_data[RTC_HOURS] = rtc_to_bcd(s, h);
652 if (tm->tm_hour >= 12)
653 s->cmos_data[RTC_HOURS] |= 0x80;
655 s->cmos_data[RTC_DAY_OF_WEEK] = rtc_to_bcd(s, tm->tm_wday + 1);
656 s->cmos_data[RTC_DAY_OF_MONTH] = rtc_to_bcd(s, tm->tm_mday);
657 s->cmos_data[RTC_MONTH] = rtc_to_bcd(s, tm->tm_mon + 1);
658 year = tm->tm_year + 1900 - s->base_year;
659 s->cmos_data[RTC_YEAR] = rtc_to_bcd(s, year % 100);
660 s->cmos_data[RTC_CENTURY] = rtc_to_bcd(s, year / 100);
663 static void rtc_update_time(RTCState *s)
665 struct tm ret;
666 time_t guest_sec;
667 int64_t guest_nsec;
669 guest_nsec = get_guest_rtc_ns(s);
670 guest_sec = guest_nsec / NANOSECONDS_PER_SECOND;
671 gmtime_r(&guest_sec, &ret);
673 /* Is SET flag of Register B disabled? */
674 if ((s->cmos_data[RTC_REG_B] & REG_B_SET) == 0) {
675 rtc_set_cmos(s, &ret);
679 static int update_in_progress(RTCState *s)
681 int64_t guest_nsec;
683 if (!rtc_running(s)) {
684 return 0;
686 if (timer_pending(s->update_timer)) {
687 int64_t next_update_time = timer_expire_time_ns(s->update_timer);
688 /* Latch UIP until the timer expires. */
689 if (qemu_clock_get_ns(rtc_clock) >=
690 (next_update_time - UIP_HOLD_LENGTH)) {
691 s->cmos_data[RTC_REG_A] |= REG_A_UIP;
692 return 1;
696 guest_nsec = get_guest_rtc_ns(s);
697 /* UIP bit will be set at last 244us of every second. */
698 if ((guest_nsec % NANOSECONDS_PER_SECOND) >=
699 (NANOSECONDS_PER_SECOND - UIP_HOLD_LENGTH)) {
700 return 1;
702 return 0;
705 static uint64_t cmos_ioport_read(void *opaque, hwaddr addr,
706 unsigned size)
708 RTCState *s = opaque;
709 int ret;
710 if ((addr & 1) == 0) {
711 return 0xff;
712 } else {
713 switch(s->cmos_index) {
714 case RTC_IBM_PS2_CENTURY_BYTE:
715 s->cmos_index = RTC_CENTURY;
716 /* fall through */
717 case RTC_CENTURY:
718 case RTC_SECONDS:
719 case RTC_MINUTES:
720 case RTC_HOURS:
721 case RTC_DAY_OF_WEEK:
722 case RTC_DAY_OF_MONTH:
723 case RTC_MONTH:
724 case RTC_YEAR:
725 /* if not in set mode, calibrate cmos before
726 * reading*/
727 if (rtc_running(s)) {
728 rtc_update_time(s);
730 ret = s->cmos_data[s->cmos_index];
731 break;
732 case RTC_REG_A:
733 ret = s->cmos_data[s->cmos_index];
734 if (update_in_progress(s)) {
735 ret |= REG_A_UIP;
737 break;
738 case RTC_REG_C:
739 ret = s->cmos_data[s->cmos_index];
740 qemu_irq_lower(s->irq);
741 s->cmos_data[RTC_REG_C] = 0x00;
742 if (ret & (REG_C_UF | REG_C_AF)) {
743 check_update_timer(s);
746 if(s->irq_coalesced &&
747 (s->cmos_data[RTC_REG_B] & REG_B_PIE) &&
748 s->irq_reinject_on_ack_count < RTC_REINJECT_ON_ACK_COUNT) {
749 s->irq_reinject_on_ack_count++;
750 s->cmos_data[RTC_REG_C] |= REG_C_IRQF | REG_C_PF;
751 DPRINTF_C("cmos: injecting on ack\n");
752 if (rtc_policy_slew_deliver_irq(s)) {
753 s->irq_coalesced--;
754 DPRINTF_C("cmos: coalesced irqs decreased to %d\n",
755 s->irq_coalesced);
758 break;
759 default:
760 ret = s->cmos_data[s->cmos_index];
761 break;
763 CMOS_DPRINTF("cmos: read index=0x%02x val=0x%02x\n",
764 s->cmos_index, ret);
765 return ret;
769 void rtc_set_memory(ISADevice *dev, int addr, int val)
771 RTCState *s = MC146818_RTC(dev);
772 if (addr >= 0 && addr <= 127)
773 s->cmos_data[addr] = val;
776 int rtc_get_memory(ISADevice *dev, int addr)
778 RTCState *s = MC146818_RTC(dev);
779 assert(addr >= 0 && addr <= 127);
780 return s->cmos_data[addr];
783 static void rtc_set_date_from_host(ISADevice *dev)
785 RTCState *s = MC146818_RTC(dev);
786 struct tm tm;
788 qemu_get_timedate(&tm, 0);
790 s->base_rtc = mktimegm(&tm);
791 s->last_update = qemu_clock_get_ns(rtc_clock);
792 s->offset = 0;
794 /* set the CMOS date */
795 rtc_set_cmos(s, &tm);
798 static int rtc_pre_save(void *opaque)
800 RTCState *s = opaque;
802 rtc_update_time(s);
804 return 0;
807 static int rtc_post_load(void *opaque, int version_id)
809 RTCState *s = opaque;
811 if (version_id <= 2 || rtc_clock == QEMU_CLOCK_REALTIME) {
812 rtc_set_time(s);
813 s->offset = 0;
814 check_update_timer(s);
817 /* The periodic timer is deterministic in record/replay mode,
818 * so there is no need to update it after loading the vmstate.
819 * Reading RTC here would misalign record and replay.
821 if (replay_mode == REPLAY_MODE_NONE) {
822 uint64_t now = qemu_clock_get_ns(rtc_clock);
823 if (now < s->next_periodic_time ||
824 now > (s->next_periodic_time + get_max_clock_jump())) {
825 periodic_timer_update(s, qemu_clock_get_ns(rtc_clock), 0);
829 if (version_id >= 2) {
830 if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
831 rtc_coalesced_timer_update(s);
834 return 0;
837 static bool rtc_irq_reinject_on_ack_count_needed(void *opaque)
839 RTCState *s = (RTCState *)opaque;
840 return s->irq_reinject_on_ack_count != 0;
843 static const VMStateDescription vmstate_rtc_irq_reinject_on_ack_count = {
844 .name = "mc146818rtc/irq_reinject_on_ack_count",
845 .version_id = 1,
846 .minimum_version_id = 1,
847 .needed = rtc_irq_reinject_on_ack_count_needed,
848 .fields = (VMStateField[]) {
849 VMSTATE_UINT16(irq_reinject_on_ack_count, RTCState),
850 VMSTATE_END_OF_LIST()
854 static const VMStateDescription vmstate_rtc = {
855 .name = "mc146818rtc",
856 .version_id = 3,
857 .minimum_version_id = 1,
858 .pre_save = rtc_pre_save,
859 .post_load = rtc_post_load,
860 .fields = (VMStateField[]) {
861 VMSTATE_BUFFER(cmos_data, RTCState),
862 VMSTATE_UINT8(cmos_index, RTCState),
863 VMSTATE_UNUSED(7*4),
864 VMSTATE_TIMER_PTR(periodic_timer, RTCState),
865 VMSTATE_INT64(next_periodic_time, RTCState),
866 VMSTATE_UNUSED(3*8),
867 VMSTATE_UINT32_V(irq_coalesced, RTCState, 2),
868 VMSTATE_UINT32_V(period, RTCState, 2),
869 VMSTATE_UINT64_V(base_rtc, RTCState, 3),
870 VMSTATE_UINT64_V(last_update, RTCState, 3),
871 VMSTATE_INT64_V(offset, RTCState, 3),
872 VMSTATE_TIMER_PTR_V(update_timer, RTCState, 3),
873 VMSTATE_UINT64_V(next_alarm_time, RTCState, 3),
874 VMSTATE_END_OF_LIST()
876 .subsections = (const VMStateDescription*[]) {
877 &vmstate_rtc_irq_reinject_on_ack_count,
878 NULL
882 static void rtc_notify_clock_reset(Notifier *notifier, void *data)
884 RTCState *s = container_of(notifier, RTCState, clock_reset_notifier);
885 int64_t now = *(int64_t *)data;
887 rtc_set_date_from_host(ISA_DEVICE(s));
888 periodic_timer_update(s, now, 0);
889 check_update_timer(s);
891 if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
892 rtc_coalesced_timer_update(s);
896 /* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
897 BIOS will read it and start S3 resume at POST Entry */
898 static void rtc_notify_suspend(Notifier *notifier, void *data)
900 RTCState *s = container_of(notifier, RTCState, suspend_notifier);
901 rtc_set_memory(ISA_DEVICE(s), 0xF, 0xFE);
904 static void rtc_reset(void *opaque)
906 RTCState *s = opaque;
908 s->cmos_data[RTC_REG_B] &= ~(REG_B_PIE | REG_B_AIE | REG_B_SQWE);
909 s->cmos_data[RTC_REG_C] &= ~(REG_C_UF | REG_C_IRQF | REG_C_PF | REG_C_AF);
910 check_update_timer(s);
912 qemu_irq_lower(s->irq);
914 if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
915 s->irq_coalesced = 0;
916 s->irq_reinject_on_ack_count = 0;
920 static const MemoryRegionOps cmos_ops = {
921 .read = cmos_ioport_read,
922 .write = cmos_ioport_write,
923 .impl = {
924 .min_access_size = 1,
925 .max_access_size = 1,
927 .endianness = DEVICE_LITTLE_ENDIAN,
930 static void rtc_get_date(Object *obj, struct tm *current_tm, Error **errp)
932 RTCState *s = MC146818_RTC(obj);
934 rtc_update_time(s);
935 rtc_get_time(s, current_tm);
938 static void rtc_realizefn(DeviceState *dev, Error **errp)
940 ISADevice *isadev = ISA_DEVICE(dev);
941 RTCState *s = MC146818_RTC(dev);
942 int base = 0x70;
944 s->cmos_data[RTC_REG_A] = 0x26;
945 s->cmos_data[RTC_REG_B] = 0x02;
946 s->cmos_data[RTC_REG_C] = 0x00;
947 s->cmos_data[RTC_REG_D] = 0x80;
949 /* This is for historical reasons. The default base year qdev property
950 * was set to 2000 for most machine types before the century byte was
951 * implemented.
953 * This if statement means that the century byte will be always 0
954 * (at least until 2079...) for base_year = 1980, but will be set
955 * correctly for base_year = 2000.
957 if (s->base_year == 2000) {
958 s->base_year = 0;
961 rtc_set_date_from_host(isadev);
963 switch (s->lost_tick_policy) {
964 #ifdef TARGET_I386
965 case LOST_TICK_POLICY_SLEW:
966 s->coalesced_timer =
967 timer_new_ns(rtc_clock, rtc_coalesced_timer, s);
968 break;
969 #endif
970 case LOST_TICK_POLICY_DISCARD:
971 break;
972 default:
973 error_setg(errp, "Invalid lost tick policy.");
974 return;
977 s->periodic_timer = timer_new_ns(rtc_clock, rtc_periodic_timer, s);
978 s->update_timer = timer_new_ns(rtc_clock, rtc_update_timer, s);
979 check_update_timer(s);
981 s->clock_reset_notifier.notify = rtc_notify_clock_reset;
982 qemu_clock_register_reset_notifier(rtc_clock,
983 &s->clock_reset_notifier);
985 s->suspend_notifier.notify = rtc_notify_suspend;
986 qemu_register_suspend_notifier(&s->suspend_notifier);
988 memory_region_init_io(&s->io, OBJECT(s), &cmos_ops, s, "rtc", 2);
989 isa_register_ioport(isadev, &s->io, base);
991 qdev_set_legacy_instance_id(dev, base, 3);
992 qemu_register_reset(rtc_reset, s);
994 object_property_add_tm(OBJECT(s), "date", rtc_get_date, NULL);
996 object_property_add_alias(qdev_get_machine(), "rtc-time",
997 OBJECT(s), "date", NULL);
999 qdev_init_gpio_out(dev, &s->irq, 1);
1002 ISADevice *mc146818_rtc_init(ISABus *bus, int base_year, qemu_irq intercept_irq)
1004 DeviceState *dev;
1005 ISADevice *isadev;
1006 RTCState *s;
1008 isadev = isa_create(bus, TYPE_MC146818_RTC);
1009 dev = DEVICE(isadev);
1010 s = MC146818_RTC(isadev);
1011 qdev_prop_set_int32(dev, "base_year", base_year);
1012 qdev_init_nofail(dev);
1013 if (intercept_irq) {
1014 qdev_connect_gpio_out(dev, 0, intercept_irq);
1015 } else {
1016 isa_connect_gpio_out(isadev, 0, RTC_ISA_IRQ);
1018 QLIST_INSERT_HEAD(&rtc_devices, s, link);
1020 return isadev;
1023 static Property mc146818rtc_properties[] = {
1024 DEFINE_PROP_INT32("base_year", RTCState, base_year, 1980),
1025 DEFINE_PROP_LOSTTICKPOLICY("lost_tick_policy", RTCState,
1026 lost_tick_policy, LOST_TICK_POLICY_DISCARD),
1027 DEFINE_PROP_END_OF_LIST(),
1030 static void rtc_resetdev(DeviceState *d)
1032 RTCState *s = MC146818_RTC(d);
1034 /* Reason: VM do suspend self will set 0xfe
1035 * Reset any values other than 0xfe(Guest suspend case) */
1036 if (s->cmos_data[0x0f] != 0xfe) {
1037 s->cmos_data[0x0f] = 0x00;
1041 static void rtc_class_initfn(ObjectClass *klass, void *data)
1043 DeviceClass *dc = DEVICE_CLASS(klass);
1045 dc->realize = rtc_realizefn;
1046 dc->reset = rtc_resetdev;
1047 dc->vmsd = &vmstate_rtc;
1048 dc->props = mc146818rtc_properties;
1049 /* Reason: needs to be wired up by rtc_init() */
1050 dc->user_creatable = false;
1053 static void rtc_finalize(Object *obj)
1055 object_property_del(qdev_get_machine(), "rtc", NULL);
1058 static const TypeInfo mc146818rtc_info = {
1059 .name = TYPE_MC146818_RTC,
1060 .parent = TYPE_ISA_DEVICE,
1061 .instance_size = sizeof(RTCState),
1062 .class_init = rtc_class_initfn,
1063 .instance_finalize = rtc_finalize,
1066 static void mc146818rtc_register_types(void)
1068 type_register_static(&mc146818rtc_info);
1071 type_init(mc146818rtc_register_types)