Merge remote branch 'mst/for_anthony' into staging
[qemu/aliguori-queue.git] / hw / pflash_cfi01.c
blob95b406be71caa83e5e9c34a13f7df0f0749559c2
1 /*
2 * CFI parallel flash with Intel command set emulation
4 * Copyright (c) 2006 Thorsten Zitterell
5 * Copyright (c) 2005 Jocelyn Mayer
7 * This library is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU Lesser General Public
9 * License as published by the Free Software Foundation; either
10 * version 2 of the License, or (at your option) any later version.
12 * This library is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * Lesser General Public License for more details.
17 * You should have received a copy of the GNU Lesser General Public
18 * License along with this library; if not, see <http://www.gnu.org/licenses/>.
22 * For now, this code can emulate flashes of 1, 2 or 4 bytes width.
23 * Supported commands/modes are:
24 * - flash read
25 * - flash write
26 * - flash ID read
27 * - sector erase
28 * - CFI queries
30 * It does not support timings
31 * It does not support flash interleaving
32 * It does not implement software data protection as found in many real chips
33 * It does not implement erase suspend/resume commands
34 * It does not implement multiple sectors erase
36 * It does not implement much more ...
39 #include "hw.h"
40 #include "flash.h"
41 #include "block.h"
42 #include "qemu-timer.h"
44 #define PFLASH_BUG(fmt, ...) \
45 do { \
46 printf("PFLASH: Possible BUG - " fmt, ## __VA_ARGS__); \
47 exit(1); \
48 } while(0)
50 /* #define PFLASH_DEBUG */
51 #ifdef PFLASH_DEBUG
52 #define DPRINTF(fmt, ...) \
53 do { \
54 printf("PFLASH: " fmt , ## __VA_ARGS__); \
55 } while (0)
56 #else
57 #define DPRINTF(fmt, ...) do { } while (0)
58 #endif
60 struct pflash_t {
61 BlockDriverState *bs;
62 target_phys_addr_t base;
63 target_phys_addr_t sector_len;
64 target_phys_addr_t total_len;
65 int width;
66 int wcycle; /* if 0, the flash is read normally */
67 int bypass;
68 int ro;
69 uint8_t cmd;
70 uint8_t status;
71 uint16_t ident[4];
72 uint8_t cfi_len;
73 uint8_t cfi_table[0x52];
74 target_phys_addr_t counter;
75 unsigned int writeblock_size;
76 QEMUTimer *timer;
77 ram_addr_t off;
78 int fl_mem;
79 void *storage;
82 static void pflash_timer (void *opaque)
84 pflash_t *pfl = opaque;
86 DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
87 /* Reset flash */
88 pfl->status ^= 0x80;
89 if (pfl->bypass) {
90 pfl->wcycle = 2;
91 } else {
92 cpu_register_physical_memory(pfl->base, pfl->total_len,
93 pfl->off | IO_MEM_ROMD | pfl->fl_mem);
94 pfl->wcycle = 0;
96 pfl->cmd = 0;
99 static uint32_t pflash_read (pflash_t *pfl, target_phys_addr_t offset,
100 int width)
102 target_phys_addr_t boff;
103 uint32_t ret;
104 uint8_t *p;
106 ret = -1;
107 boff = offset & 0xFF; /* why this here ?? */
109 if (pfl->width == 2)
110 boff = boff >> 1;
111 else if (pfl->width == 4)
112 boff = boff >> 2;
114 #if 0
115 DPRINTF("%s: reading offset " TARGET_FMT_plx " under cmd %02x width %d\n",
116 __func__, offset, pfl->cmd, width);
117 #endif
118 switch (pfl->cmd) {
119 case 0x00:
120 /* Flash area read */
121 p = pfl->storage;
122 switch (width) {
123 case 1:
124 ret = p[offset];
125 DPRINTF("%s: data offset " TARGET_FMT_plx " %02x\n",
126 __func__, offset, ret);
127 break;
128 case 2:
129 #if defined(TARGET_WORDS_BIGENDIAN)
130 ret = p[offset] << 8;
131 ret |= p[offset + 1];
132 #else
133 ret = p[offset];
134 ret |= p[offset + 1] << 8;
135 #endif
136 DPRINTF("%s: data offset " TARGET_FMT_plx " %04x\n",
137 __func__, offset, ret);
138 break;
139 case 4:
140 #if defined(TARGET_WORDS_BIGENDIAN)
141 ret = p[offset] << 24;
142 ret |= p[offset + 1] << 16;
143 ret |= p[offset + 2] << 8;
144 ret |= p[offset + 3];
145 #else
146 ret = p[offset];
147 ret |= p[offset + 1] << 8;
148 ret |= p[offset + 1] << 8;
149 ret |= p[offset + 2] << 16;
150 ret |= p[offset + 3] << 24;
151 #endif
152 DPRINTF("%s: data offset " TARGET_FMT_plx " %08x\n",
153 __func__, offset, ret);
154 break;
155 default:
156 DPRINTF("BUG in %s\n", __func__);
159 break;
160 case 0x20: /* Block erase */
161 case 0x50: /* Clear status register */
162 case 0x60: /* Block /un)lock */
163 case 0x70: /* Status Register */
164 case 0xe8: /* Write block */
165 /* Status register read */
166 ret = pfl->status;
167 DPRINTF("%s: status %x\n", __func__, ret);
168 break;
169 case 0x98: /* Query mode */
170 if (boff > pfl->cfi_len)
171 ret = 0;
172 else
173 ret = pfl->cfi_table[boff];
174 break;
175 default:
176 /* This should never happen : reset state & treat it as a read */
177 DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
178 pfl->wcycle = 0;
179 pfl->cmd = 0;
181 return ret;
184 /* update flash content on disk */
185 static void pflash_update(pflash_t *pfl, int offset,
186 int size)
188 int offset_end;
189 if (pfl->bs) {
190 offset_end = offset + size;
191 /* round to sectors */
192 offset = offset >> 9;
193 offset_end = (offset_end + 511) >> 9;
194 bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
195 offset_end - offset);
199 static inline void pflash_data_write(pflash_t *pfl, target_phys_addr_t offset,
200 uint32_t value, int width)
202 uint8_t *p = pfl->storage;
204 DPRINTF("%s: block write offset " TARGET_FMT_plx
205 " value %x counter " TARGET_FMT_plx "\n",
206 __func__, offset, value, pfl->counter);
207 switch (width) {
208 case 1:
209 p[offset] = value;
210 break;
211 case 2:
212 #if defined(TARGET_WORDS_BIGENDIAN)
213 p[offset] = value >> 8;
214 p[offset + 1] = value;
215 #else
216 p[offset] = value;
217 p[offset + 1] = value >> 8;
218 #endif
219 break;
220 case 4:
221 #if defined(TARGET_WORDS_BIGENDIAN)
222 p[offset] = value >> 24;
223 p[offset + 1] = value >> 16;
224 p[offset + 2] = value >> 8;
225 p[offset + 3] = value;
226 #else
227 p[offset] = value;
228 p[offset + 1] = value >> 8;
229 p[offset + 2] = value >> 16;
230 p[offset + 3] = value >> 24;
231 #endif
232 break;
237 static void pflash_write(pflash_t *pfl, target_phys_addr_t offset,
238 uint32_t value, int width)
240 uint8_t *p;
241 uint8_t cmd;
243 cmd = value;
245 DPRINTF("%s: writing offset " TARGET_FMT_plx " value %08x width %d wcycle 0x%x\n",
246 __func__, offset, value, width, pfl->wcycle);
248 if (!pfl->wcycle) {
249 /* Set the device in I/O access mode */
250 cpu_register_physical_memory(pfl->base, pfl->total_len, pfl->fl_mem);
253 switch (pfl->wcycle) {
254 case 0:
255 /* read mode */
256 switch (cmd) {
257 case 0x00: /* ??? */
258 goto reset_flash;
259 case 0x10: /* Single Byte Program */
260 case 0x40: /* Single Byte Program */
261 DPRINTF("%s: Single Byte Program\n", __func__);
262 break;
263 case 0x20: /* Block erase */
264 p = pfl->storage;
265 offset &= ~(pfl->sector_len - 1);
267 DPRINTF("%s: block erase at " TARGET_FMT_plx " bytes "
268 TARGET_FMT_plx "\n",
269 __func__, offset, pfl->sector_len);
271 memset(p + offset, 0xff, pfl->sector_len);
272 pflash_update(pfl, offset, pfl->sector_len);
273 pfl->status |= 0x80; /* Ready! */
274 break;
275 case 0x50: /* Clear status bits */
276 DPRINTF("%s: Clear status bits\n", __func__);
277 pfl->status = 0x0;
278 goto reset_flash;
279 case 0x60: /* Block (un)lock */
280 DPRINTF("%s: Block unlock\n", __func__);
281 break;
282 case 0x70: /* Status Register */
283 DPRINTF("%s: Read status register\n", __func__);
284 pfl->cmd = cmd;
285 return;
286 case 0x98: /* CFI query */
287 DPRINTF("%s: CFI query\n", __func__);
288 break;
289 case 0xe8: /* Write to buffer */
290 DPRINTF("%s: Write to buffer\n", __func__);
291 pfl->status |= 0x80; /* Ready! */
292 break;
293 case 0xff: /* Read array mode */
294 DPRINTF("%s: Read array mode\n", __func__);
295 goto reset_flash;
296 default:
297 goto error_flash;
299 pfl->wcycle++;
300 pfl->cmd = cmd;
301 return;
302 case 1:
303 switch (pfl->cmd) {
304 case 0x10: /* Single Byte Program */
305 case 0x40: /* Single Byte Program */
306 DPRINTF("%s: Single Byte Program\n", __func__);
307 pflash_data_write(pfl, offset, value, width);
308 pflash_update(pfl, offset, width);
309 pfl->status |= 0x80; /* Ready! */
310 pfl->wcycle = 0;
311 break;
312 case 0x20: /* Block erase */
313 case 0x28:
314 if (cmd == 0xd0) { /* confirm */
315 pfl->wcycle = 0;
316 pfl->status |= 0x80;
317 } else if (cmd == 0xff) { /* read array mode */
318 goto reset_flash;
319 } else
320 goto error_flash;
322 break;
323 case 0xe8:
324 DPRINTF("%s: block write of %x bytes\n", __func__, value);
325 pfl->counter = value;
326 pfl->wcycle++;
327 break;
328 case 0x60:
329 if (cmd == 0xd0) {
330 pfl->wcycle = 0;
331 pfl->status |= 0x80;
332 } else if (cmd == 0x01) {
333 pfl->wcycle = 0;
334 pfl->status |= 0x80;
335 } else if (cmd == 0xff) {
336 goto reset_flash;
337 } else {
338 DPRINTF("%s: Unknown (un)locking command\n", __func__);
339 goto reset_flash;
341 break;
342 case 0x98:
343 if (cmd == 0xff) {
344 goto reset_flash;
345 } else {
346 DPRINTF("%s: leaving query mode\n", __func__);
348 break;
349 default:
350 goto error_flash;
352 return;
353 case 2:
354 switch (pfl->cmd) {
355 case 0xe8: /* Block write */
356 pflash_data_write(pfl, offset, value, width);
358 pfl->status |= 0x80;
360 if (!pfl->counter) {
361 target_phys_addr_t mask = pfl->writeblock_size - 1;
362 mask = ~mask;
364 DPRINTF("%s: block write finished\n", __func__);
365 pfl->wcycle++;
366 /* Flush the entire write buffer onto backing storage. */
367 pflash_update(pfl, offset & mask, pfl->writeblock_size);
370 pfl->counter--;
371 break;
372 default:
373 goto error_flash;
375 return;
376 case 3: /* Confirm mode */
377 switch (pfl->cmd) {
378 case 0xe8: /* Block write */
379 if (cmd == 0xd0) {
380 pfl->wcycle = 0;
381 pfl->status |= 0x80;
382 } else {
383 DPRINTF("%s: unknown command for \"write block\"\n", __func__);
384 PFLASH_BUG("Write block confirm");
385 goto reset_flash;
387 break;
388 default:
389 goto error_flash;
391 return;
392 default:
393 /* Should never happen */
394 DPRINTF("%s: invalid write state\n", __func__);
395 goto reset_flash;
397 return;
399 error_flash:
400 printf("%s: Unimplemented flash cmd sequence "
401 "(offset " TARGET_FMT_plx ", wcycle 0x%x cmd 0x%x value 0x%x)\n",
402 __func__, offset, pfl->wcycle, pfl->cmd, value);
404 reset_flash:
405 cpu_register_physical_memory(pfl->base, pfl->total_len,
406 pfl->off | IO_MEM_ROMD | pfl->fl_mem);
408 pfl->bypass = 0;
409 pfl->wcycle = 0;
410 pfl->cmd = 0;
411 return;
415 static uint32_t pflash_readb (void *opaque, target_phys_addr_t addr)
417 return pflash_read(opaque, addr, 1);
420 static uint32_t pflash_readw (void *opaque, target_phys_addr_t addr)
422 pflash_t *pfl = opaque;
424 return pflash_read(pfl, addr, 2);
427 static uint32_t pflash_readl (void *opaque, target_phys_addr_t addr)
429 pflash_t *pfl = opaque;
431 return pflash_read(pfl, addr, 4);
434 static void pflash_writeb (void *opaque, target_phys_addr_t addr,
435 uint32_t value)
437 pflash_write(opaque, addr, value, 1);
440 static void pflash_writew (void *opaque, target_phys_addr_t addr,
441 uint32_t value)
443 pflash_t *pfl = opaque;
445 pflash_write(pfl, addr, value, 2);
448 static void pflash_writel (void *opaque, target_phys_addr_t addr,
449 uint32_t value)
451 pflash_t *pfl = opaque;
453 pflash_write(pfl, addr, value, 4);
456 static CPUWriteMemoryFunc * const pflash_write_ops[] = {
457 &pflash_writeb,
458 &pflash_writew,
459 &pflash_writel,
462 static CPUReadMemoryFunc * const pflash_read_ops[] = {
463 &pflash_readb,
464 &pflash_readw,
465 &pflash_readl,
468 /* Count trailing zeroes of a 32 bits quantity */
469 static int ctz32 (uint32_t n)
471 int ret;
473 ret = 0;
474 if (!(n & 0xFFFF)) {
475 ret += 16;
476 n = n >> 16;
478 if (!(n & 0xFF)) {
479 ret += 8;
480 n = n >> 8;
482 if (!(n & 0xF)) {
483 ret += 4;
484 n = n >> 4;
486 if (!(n & 0x3)) {
487 ret += 2;
488 n = n >> 2;
490 if (!(n & 0x1)) {
491 ret++;
492 n = n >> 1;
494 #if 0 /* This is not necessary as n is never 0 */
495 if (!n)
496 ret++;
497 #endif
499 return ret;
502 pflash_t *pflash_cfi01_register(target_phys_addr_t base, ram_addr_t off,
503 BlockDriverState *bs, uint32_t sector_len,
504 int nb_blocs, int width,
505 uint16_t id0, uint16_t id1,
506 uint16_t id2, uint16_t id3)
508 pflash_t *pfl;
509 target_phys_addr_t total_len;
510 int ret;
512 total_len = sector_len * nb_blocs;
514 /* XXX: to be fixed */
515 #if 0
516 if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
517 total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
518 return NULL;
519 #endif
521 pfl = qemu_mallocz(sizeof(pflash_t));
523 /* FIXME: Allocate ram ourselves. */
524 pfl->storage = qemu_get_ram_ptr(off);
525 pfl->fl_mem = cpu_register_io_memory(
526 pflash_read_ops, pflash_write_ops, pfl);
527 pfl->off = off;
528 cpu_register_physical_memory(base, total_len,
529 off | pfl->fl_mem | IO_MEM_ROMD);
531 pfl->bs = bs;
532 if (pfl->bs) {
533 /* read the initial flash content */
534 ret = bdrv_read(pfl->bs, 0, pfl->storage, total_len >> 9);
535 if (ret < 0) {
536 cpu_unregister_io_memory(pfl->fl_mem);
537 qemu_free(pfl);
538 return NULL;
541 #if 0 /* XXX: there should be a bit to set up read-only,
542 * the same way the hardware does (with WP pin).
544 pfl->ro = 1;
545 #else
546 pfl->ro = 0;
547 #endif
548 pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl);
549 pfl->base = base;
550 pfl->sector_len = sector_len;
551 pfl->total_len = total_len;
552 pfl->width = width;
553 pfl->wcycle = 0;
554 pfl->cmd = 0;
555 pfl->status = 0;
556 pfl->ident[0] = id0;
557 pfl->ident[1] = id1;
558 pfl->ident[2] = id2;
559 pfl->ident[3] = id3;
560 /* Hardcoded CFI table */
561 pfl->cfi_len = 0x52;
562 /* Standard "QRY" string */
563 pfl->cfi_table[0x10] = 'Q';
564 pfl->cfi_table[0x11] = 'R';
565 pfl->cfi_table[0x12] = 'Y';
566 /* Command set (Intel) */
567 pfl->cfi_table[0x13] = 0x01;
568 pfl->cfi_table[0x14] = 0x00;
569 /* Primary extended table address (none) */
570 pfl->cfi_table[0x15] = 0x31;
571 pfl->cfi_table[0x16] = 0x00;
572 /* Alternate command set (none) */
573 pfl->cfi_table[0x17] = 0x00;
574 pfl->cfi_table[0x18] = 0x00;
575 /* Alternate extended table (none) */
576 pfl->cfi_table[0x19] = 0x00;
577 pfl->cfi_table[0x1A] = 0x00;
578 /* Vcc min */
579 pfl->cfi_table[0x1B] = 0x45;
580 /* Vcc max */
581 pfl->cfi_table[0x1C] = 0x55;
582 /* Vpp min (no Vpp pin) */
583 pfl->cfi_table[0x1D] = 0x00;
584 /* Vpp max (no Vpp pin) */
585 pfl->cfi_table[0x1E] = 0x00;
586 /* Reserved */
587 pfl->cfi_table[0x1F] = 0x07;
588 /* Timeout for min size buffer write */
589 pfl->cfi_table[0x20] = 0x07;
590 /* Typical timeout for block erase */
591 pfl->cfi_table[0x21] = 0x0a;
592 /* Typical timeout for full chip erase (4096 ms) */
593 pfl->cfi_table[0x22] = 0x00;
594 /* Reserved */
595 pfl->cfi_table[0x23] = 0x04;
596 /* Max timeout for buffer write */
597 pfl->cfi_table[0x24] = 0x04;
598 /* Max timeout for block erase */
599 pfl->cfi_table[0x25] = 0x04;
600 /* Max timeout for chip erase */
601 pfl->cfi_table[0x26] = 0x00;
602 /* Device size */
603 pfl->cfi_table[0x27] = ctz32(total_len); // + 1;
604 /* Flash device interface (8 & 16 bits) */
605 pfl->cfi_table[0x28] = 0x02;
606 pfl->cfi_table[0x29] = 0x00;
607 /* Max number of bytes in multi-bytes write */
608 if (width == 1) {
609 pfl->cfi_table[0x2A] = 0x08;
610 } else {
611 pfl->cfi_table[0x2A] = 0x0B;
613 pfl->writeblock_size = 1 << pfl->cfi_table[0x2A];
615 pfl->cfi_table[0x2B] = 0x00;
616 /* Number of erase block regions (uniform) */
617 pfl->cfi_table[0x2C] = 0x01;
618 /* Erase block region 1 */
619 pfl->cfi_table[0x2D] = nb_blocs - 1;
620 pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8;
621 pfl->cfi_table[0x2F] = sector_len >> 8;
622 pfl->cfi_table[0x30] = sector_len >> 16;
624 /* Extended */
625 pfl->cfi_table[0x31] = 'P';
626 pfl->cfi_table[0x32] = 'R';
627 pfl->cfi_table[0x33] = 'I';
629 pfl->cfi_table[0x34] = '1';
630 pfl->cfi_table[0x35] = '1';
632 pfl->cfi_table[0x36] = 0x00;
633 pfl->cfi_table[0x37] = 0x00;
634 pfl->cfi_table[0x38] = 0x00;
635 pfl->cfi_table[0x39] = 0x00;
637 pfl->cfi_table[0x3a] = 0x00;
639 pfl->cfi_table[0x3b] = 0x00;
640 pfl->cfi_table[0x3c] = 0x00;
642 return pfl;