pc-bios/s390-ccw: fix sparse warnings
[qemu.git] / pc-bios / s390-ccw / virtio.c
blob4dc91a7c439f67429c6457240af338324190a0d6
1 /*
2 * Virtio driver bits
4 * Copyright (c) 2013 Alexander Graf <agraf@suse.de>
6 * This work is licensed under the terms of the GNU GPL, version 2 or (at
7 * your option) any later version. See the COPYING file in the top-level
8 * directory.
9 */
11 #include "s390-ccw.h"
12 #include "virtio.h"
14 static struct vring block;
16 static char chsc_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
18 static long kvm_hypercall(unsigned long nr, unsigned long param1,
19 unsigned long param2)
21 register ulong r_nr asm("1") = nr;
22 register ulong r_param1 asm("2") = param1;
23 register ulong r_param2 asm("3") = param2;
24 register long retval asm("2");
26 asm volatile ("diag 2,4,0x500"
27 : "=d" (retval)
28 : "d" (r_nr), "0" (r_param1), "r"(r_param2)
29 : "memory", "cc");
31 return retval;
34 static void virtio_notify(struct subchannel_id schid)
36 kvm_hypercall(KVM_S390_VIRTIO_CCW_NOTIFY, *(u32 *)&schid, 0);
39 /***********************************************
40 * Virtio functions *
41 ***********************************************/
43 static int drain_irqs(struct subchannel_id schid)
45 struct irb irb = {};
46 int r = 0;
48 while (1) {
49 /* FIXME: make use of TPI, for that enable subchannel and isc */
50 if (tsch(schid, &irb)) {
51 /* Might want to differentiate error codes later on. */
52 if (irb.scsw.cstat) {
53 r = -EIO;
54 } else if (irb.scsw.dstat != 0xc) {
55 r = -EIO;
57 return r;
62 static int run_ccw(struct subchannel_id schid, int cmd, void *ptr, int len)
64 struct ccw1 ccw = {};
65 struct cmd_orb orb = {};
66 struct schib schib;
67 int r;
69 /* start command processing */
70 stsch_err(schid, &schib);
71 schib.scsw.ctrl = SCSW_FCTL_START_FUNC;
72 msch(schid, &schib);
74 /* start subchannel command */
75 orb.fmt = 1;
76 orb.cpa = (u32)(long)&ccw;
77 orb.lpm = 0x80;
79 ccw.cmd_code = cmd;
80 ccw.cda = (long)ptr;
81 ccw.count = len;
83 r = ssch(schid, &orb);
85 * XXX Wait until device is done processing the CCW. For now we can
86 * assume that a simple tsch will have finished the CCW processing,
87 * but the architecture allows for asynchronous operation
89 if (!r) {
90 r = drain_irqs(schid);
92 return r;
95 static void virtio_set_status(struct subchannel_id schid,
96 unsigned long dev_addr)
98 unsigned char status = dev_addr;
99 if (run_ccw(schid, CCW_CMD_WRITE_STATUS, &status, sizeof(status))) {
100 virtio_panic("Could not write status to host!\n");
104 static void virtio_reset(struct subchannel_id schid)
106 run_ccw(schid, CCW_CMD_VDEV_RESET, NULL, 0);
109 static void vring_init(struct vring *vr, unsigned int num, void *p,
110 unsigned long align)
112 debug_print_addr("init p", p);
113 vr->num = num;
114 vr->desc = p;
115 vr->avail = p + num*sizeof(struct vring_desc);
116 vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + align-1)
117 & ~(align - 1));
119 /* Zero out all relevant field */
120 vr->avail->flags = 0;
121 vr->avail->idx = 0;
123 /* We're running with interrupts off anyways, so don't bother */
124 vr->used->flags = VRING_USED_F_NO_NOTIFY;
125 vr->used->idx = 0;
126 vr->used_idx = 0;
127 vr->next_idx = 0;
129 debug_print_addr("init vr", vr);
132 static void vring_notify(struct subchannel_id schid)
134 virtio_notify(schid);
137 static void vring_send_buf(struct vring *vr, void *p, int len, int flags)
139 /* For follow-up chains we need to keep the first entry point */
140 if (!(flags & VRING_HIDDEN_IS_CHAIN)) {
141 vr->avail->ring[vr->avail->idx % vr->num] = vr->next_idx;
144 vr->desc[vr->next_idx].addr = (ulong)p;
145 vr->desc[vr->next_idx].len = len;
146 vr->desc[vr->next_idx].flags = flags & ~VRING_HIDDEN_IS_CHAIN;
147 vr->desc[vr->next_idx].next = vr->next_idx;
148 vr->desc[vr->next_idx].next++;
149 vr->next_idx++;
151 /* Chains only have a single ID */
152 if (!(flags & VRING_DESC_F_NEXT)) {
153 vr->avail->idx++;
157 static u64 get_clock(void)
159 u64 r;
161 asm volatile("stck %0" : "=Q" (r) : : "cc");
162 return r;
165 static ulong get_second(void)
167 return (get_clock() >> 12) / 1000000;
171 * Wait for the host to reply.
173 * timeout is in seconds if > 0.
175 * Returns 0 on success, 1 on timeout.
177 static int vring_wait_reply(struct vring *vr, int timeout)
179 ulong target_second = get_second() + timeout;
180 struct subchannel_id schid = vr->schid;
181 int r = 0;
183 /* Wait until the used index has moved. */
184 while (vr->used->idx == vr->used_idx) {
185 vring_notify(schid);
186 if (timeout && (get_second() >= target_second)) {
187 r = 1;
188 break;
190 yield();
193 vr->used_idx = vr->used->idx;
194 vr->next_idx = 0;
195 vr->desc[0].len = 0;
196 vr->desc[0].flags = 0;
198 return r;
201 /***********************************************
202 * Virtio block *
203 ***********************************************/
205 int virtio_read_many(ulong sector, void *load_addr, int sec_num)
207 struct virtio_blk_outhdr out_hdr;
208 u8 status;
209 int r;
211 /* Tell the host we want to read */
212 out_hdr.type = VIRTIO_BLK_T_IN;
213 out_hdr.ioprio = 99;
214 out_hdr.sector = virtio_sector_adjust(sector);
216 vring_send_buf(&block, &out_hdr, sizeof(out_hdr), VRING_DESC_F_NEXT);
218 /* This is where we want to receive data */
219 vring_send_buf(&block, load_addr, virtio_get_block_size() * sec_num,
220 VRING_DESC_F_WRITE | VRING_HIDDEN_IS_CHAIN |
221 VRING_DESC_F_NEXT);
223 /* status field */
224 vring_send_buf(&block, &status, sizeof(u8), VRING_DESC_F_WRITE |
225 VRING_HIDDEN_IS_CHAIN);
227 /* Now we can tell the host to read */
228 vring_wait_reply(&block, 0);
230 r = drain_irqs(block.schid);
231 if (r) {
232 /* Well, whatever status is supposed to contain... */
233 status = 1;
235 return status;
238 unsigned long virtio_load_direct(ulong rec_list1, ulong rec_list2,
239 ulong subchan_id, void *load_addr)
241 u8 status;
242 int sec = rec_list1;
243 int sec_num = ((rec_list2 >> 32) & 0xffff) + 1;
244 int sec_len = rec_list2 >> 48;
245 ulong addr = (ulong)load_addr;
247 if (sec_len != virtio_get_block_size()) {
248 return -1;
251 sclp_print(".");
252 status = virtio_read_many(sec, (void *)addr, sec_num);
253 if (status) {
254 virtio_panic("I/O Error");
256 addr += sec_num * virtio_get_block_size();
258 return addr;
261 int virtio_read(ulong sector, void *load_addr)
263 return virtio_read_many(sector, load_addr, 1);
266 static VirtioBlkConfig blk_cfg = {};
267 static bool guessed_disk_nature;
269 bool virtio_guessed_disk_nature(void)
271 return guessed_disk_nature;
274 void virtio_assume_scsi(void)
276 guessed_disk_nature = true;
277 blk_cfg.blk_size = 512;
278 blk_cfg.physical_block_exp = 0;
281 void virtio_assume_eckd(void)
283 guessed_disk_nature = true;
284 blk_cfg.blk_size = 4096;
285 blk_cfg.physical_block_exp = 0;
287 /* this must be here to calculate code segment position */
288 blk_cfg.geometry.heads = 15;
289 blk_cfg.geometry.sectors = 12;
292 bool virtio_disk_is_scsi(void)
294 if (guessed_disk_nature) {
295 return (virtio_get_block_size() == 512);
297 return (blk_cfg.geometry.heads == 255)
298 && (blk_cfg.geometry.sectors == 63)
299 && (virtio_get_block_size() == 512);
303 * Other supported value pairs, if any, would need to be added here.
304 * Note: head count is always 15.
306 static inline u8 virtio_eckd_sectors_for_block_size(int size)
308 switch (size) {
309 case 512:
310 return 49;
311 case 1024:
312 return 33;
313 case 2048:
314 return 21;
315 case 4096:
316 return 12;
318 return 0;
321 bool virtio_disk_is_eckd(void)
323 const int block_size = virtio_get_block_size();
325 if (guessed_disk_nature) {
326 return (block_size == 4096);
328 return (blk_cfg.geometry.heads == 15)
329 && (blk_cfg.geometry.sectors ==
330 virtio_eckd_sectors_for_block_size(block_size));
333 bool virtio_ipl_disk_is_valid(void)
335 return virtio_disk_is_scsi() || virtio_disk_is_eckd();
338 int virtio_get_block_size(void)
340 return blk_cfg.blk_size << blk_cfg.physical_block_exp;
343 uint8_t virtio_get_heads(void)
345 return blk_cfg.geometry.heads;
348 uint8_t virtio_get_sectors(void)
350 return blk_cfg.geometry.sectors;
353 uint64_t virtio_get_blocks(void)
355 return blk_cfg.capacity /
356 (virtio_get_block_size() / VIRTIO_SECTOR_SIZE);
359 void virtio_setup_block(struct subchannel_id schid)
361 struct vq_info_block info;
362 struct vq_config_block config = {};
364 blk_cfg.blk_size = 0; /* mark "illegal" - setup started... */
366 virtio_reset(schid);
369 * Skipping CCW_CMD_READ_FEAT. We're not doing anything fancy, and
370 * we'll just stop dead anyway if anything does not work like we
371 * expect it.
374 config.index = 0;
375 if (run_ccw(schid, CCW_CMD_READ_VQ_CONF, &config, sizeof(config))) {
376 virtio_panic("Could not get block device VQ configuration\n");
378 if (run_ccw(schid, CCW_CMD_READ_CONF, &blk_cfg, sizeof(blk_cfg))) {
379 virtio_panic("Could not get block device configuration\n");
381 vring_init(&block, config.num, (void *)(100 * 1024 * 1024),
382 KVM_S390_VIRTIO_RING_ALIGN);
384 info.queue = (100ULL * 1024ULL* 1024ULL);
385 info.align = KVM_S390_VIRTIO_RING_ALIGN;
386 info.index = 0;
387 info.num = config.num;
388 block.schid = schid;
390 if (!run_ccw(schid, CCW_CMD_SET_VQ, &info, sizeof(info))) {
391 virtio_set_status(schid, VIRTIO_CONFIG_S_DRIVER_OK);
394 if (!virtio_ipl_disk_is_valid()) {
395 /* make sure all getters but blocksize return 0 for invalid IPL disk */
396 memset(&blk_cfg, 0, sizeof(blk_cfg));
397 virtio_assume_scsi();
401 bool virtio_is_blk(struct subchannel_id schid)
403 int r;
404 struct senseid senseid = {};
406 /* run sense id command */
407 r = run_ccw(schid, CCW_CMD_SENSE_ID, &senseid, sizeof(senseid));
408 if (r) {
409 return false;
411 if ((senseid.cu_type != 0x3832) || (senseid.cu_model != VIRTIO_ID_BLOCK)) {
412 return false;
415 return true;
418 int enable_mss_facility(void)
420 int ret;
421 struct chsc_area_sda *sda_area = (struct chsc_area_sda *) chsc_page;
423 memset(sda_area, 0, PAGE_SIZE);
424 sda_area->request.length = 0x0400;
425 sda_area->request.code = 0x0031;
426 sda_area->operation_code = 0x2;
428 ret = chsc(sda_area);
429 if ((ret == 0) && (sda_area->response.code == 0x0001)) {
430 return 0;
432 return -EIO;