pci: rename pci_register_bar_region() to pci_register_bar()
[qemu.git] / hw / ide / piix.c
blob8525336075a7f7b1af3642596ea1e37842bed80f
1 /*
2 * QEMU IDE Emulation: PCI PIIX3/4 support.
4 * Copyright (c) 2003 Fabrice Bellard
5 * Copyright (c) 2006 Openedhand Ltd.
7 * Permission is hereby granted, free of charge, to any person obtaining a copy
8 * of this software and associated documentation files (the "Software"), to deal
9 * in the Software without restriction, including without limitation the rights
10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11 * copies of the Software, and to permit persons to whom the Software is
12 * furnished to do so, subject to the following conditions:
14 * The above copyright notice and this permission notice shall be included in
15 * all copies or substantial portions of the Software.
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23 * THE SOFTWARE.
25 #include <hw/hw.h>
26 #include <hw/pc.h>
27 #include <hw/pci.h>
28 #include <hw/isa.h>
29 #include "block.h"
30 #include "block_int.h"
31 #include "sysemu.h"
32 #include "dma.h"
34 #include <hw/ide/pci.h>
36 static uint64_t bmdma_read(void *opaque, target_phys_addr_t addr, unsigned size)
38 BMDMAState *bm = opaque;
39 uint32_t val;
41 if (size != 1) {
42 return ((uint64_t)1 << (size * 8)) - 1;
45 switch(addr & 3) {
46 case 0:
47 val = bm->cmd;
48 break;
49 case 2:
50 val = bm->status;
51 break;
52 default:
53 val = 0xff;
54 break;
56 #ifdef DEBUG_IDE
57 printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
58 #endif
59 return val;
62 static void bmdma_write(void *opaque, target_phys_addr_t addr,
63 uint64_t val, unsigned size)
65 BMDMAState *bm = opaque;
67 if (size != 1) {
68 return;
71 #ifdef DEBUG_IDE
72 printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
73 #endif
74 switch(addr & 3) {
75 case 0:
76 return bmdma_cmd_writeb(bm, val);
77 case 2:
78 bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
79 break;
83 static MemoryRegionOps piix_bmdma_ops = {
84 .read = bmdma_read,
85 .write = bmdma_write,
88 static void bmdma_setup_bar(PCIIDEState *d)
90 int i;
92 memory_region_init(&d->bmdma_bar, "piix-bmdma-container", 16);
93 for(i = 0;i < 2; i++) {
94 BMDMAState *bm = &d->bmdma[i];
96 memory_region_init_io(&bm->extra_io, &piix_bmdma_ops, bm,
97 "piix-bmdma", 4);
98 memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
99 memory_region_init_io(&bm->addr_ioport, &bmdma_addr_ioport_ops, bm,
100 "bmdma", 4);
101 memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
105 static void piix3_reset(void *opaque)
107 PCIIDEState *d = opaque;
108 uint8_t *pci_conf = d->dev.config;
109 int i;
111 for (i = 0; i < 2; i++) {
112 ide_bus_reset(&d->bus[i]);
115 /* TODO: this is the default. do not override. */
116 pci_conf[PCI_COMMAND] = 0x00;
117 /* TODO: this is the default. do not override. */
118 pci_conf[PCI_COMMAND + 1] = 0x00;
119 /* TODO: use pci_set_word */
120 pci_conf[PCI_STATUS] = PCI_STATUS_FAST_BACK;
121 pci_conf[PCI_STATUS + 1] = PCI_STATUS_DEVSEL_MEDIUM >> 8;
122 pci_conf[0x20] = 0x01; /* BMIBA: 20-23h */
125 static void pci_piix_init_ports(PCIIDEState *d) {
126 int i;
127 struct {
128 int iobase;
129 int iobase2;
130 int isairq;
131 } port_info[] = {
132 {0x1f0, 0x3f6, 14},
133 {0x170, 0x376, 15},
136 for (i = 0; i < 2; i++) {
137 ide_bus_new(&d->bus[i], &d->dev.qdev, i);
138 ide_init_ioport(&d->bus[i], port_info[i].iobase, port_info[i].iobase2);
139 ide_init2(&d->bus[i], isa_get_irq(port_info[i].isairq));
141 bmdma_init(&d->bus[i], &d->bmdma[i], d);
142 d->bmdma[i].bus = &d->bus[i];
143 qemu_add_vm_change_state_handler(d->bus[i].dma->ops->restart_cb,
144 &d->bmdma[i].dma);
148 static int pci_piix_ide_initfn(PCIDevice *dev)
150 PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
151 uint8_t *pci_conf = d->dev.config;
153 pci_conf[PCI_CLASS_PROG] = 0x80; // legacy ATA mode
155 qemu_register_reset(piix3_reset, d);
157 bmdma_setup_bar(d);
158 pci_register_bar(&d->dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
160 vmstate_register(&d->dev.qdev, 0, &vmstate_ide_pci, d);
162 pci_piix_init_ports(d);
164 return 0;
167 static int pci_piix3_xen_ide_unplug(DeviceState *dev)
169 PCIDevice *pci_dev;
170 PCIIDEState *pci_ide;
171 DriveInfo *di;
172 int i = 0;
174 pci_dev = DO_UPCAST(PCIDevice, qdev, dev);
175 pci_ide = DO_UPCAST(PCIIDEState, dev, pci_dev);
177 for (; i < 3; i++) {
178 di = drive_get_by_index(IF_IDE, i);
179 if (di != NULL && di->bdrv != NULL && !di->bdrv->removable) {
180 DeviceState *ds = bdrv_get_attached(di->bdrv);
181 if (ds) {
182 bdrv_detach(di->bdrv, ds);
184 bdrv_close(di->bdrv);
185 pci_ide->bus[di->bus].ifs[di->unit].bs = NULL;
186 drive_put_ref(di);
189 qdev_reset_all(&(pci_ide->dev.qdev));
190 return 0;
193 PCIDevice *pci_piix3_xen_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
195 PCIDevice *dev;
197 dev = pci_create_simple(bus, devfn, "piix3-ide-xen");
198 dev->qdev.info->unplug = pci_piix3_xen_ide_unplug;
199 pci_ide_create_devs(dev, hd_table);
200 return dev;
203 static int pci_piix_ide_exitfn(PCIDevice *dev)
205 PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
206 unsigned i;
208 for (i = 0; i < 2; ++i) {
209 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
210 memory_region_destroy(&d->bmdma[i].extra_io);
211 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
212 memory_region_destroy(&d->bmdma[i].addr_ioport);
214 memory_region_destroy(&d->bmdma_bar);
216 return 0;
219 /* hd_table must contain 4 block drivers */
220 /* NOTE: for the PIIX3, the IRQs and IOports are hardcoded */
221 PCIDevice *pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
223 PCIDevice *dev;
225 dev = pci_create_simple(bus, devfn, "piix3-ide");
226 pci_ide_create_devs(dev, hd_table);
227 return dev;
230 /* hd_table must contain 4 block drivers */
231 /* NOTE: for the PIIX4, the IRQs and IOports are hardcoded */
232 PCIDevice *pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
234 PCIDevice *dev;
236 dev = pci_create_simple(bus, devfn, "piix4-ide");
237 pci_ide_create_devs(dev, hd_table);
238 return dev;
241 static PCIDeviceInfo piix_ide_info[] = {
243 .qdev.name = "piix3-ide",
244 .qdev.size = sizeof(PCIIDEState),
245 .qdev.no_user = 1,
246 .no_hotplug = 1,
247 .init = pci_piix_ide_initfn,
248 .exit = pci_piix_ide_exitfn,
249 .vendor_id = PCI_VENDOR_ID_INTEL,
250 .device_id = PCI_DEVICE_ID_INTEL_82371SB_1,
251 .class_id = PCI_CLASS_STORAGE_IDE,
253 .qdev.name = "piix3-ide-xen",
254 .qdev.size = sizeof(PCIIDEState),
255 .qdev.no_user = 1,
256 .init = pci_piix_ide_initfn,
257 .vendor_id = PCI_VENDOR_ID_INTEL,
258 .device_id = PCI_DEVICE_ID_INTEL_82371SB_1,
259 .class_id = PCI_CLASS_STORAGE_IDE,
261 .qdev.name = "piix4-ide",
262 .qdev.size = sizeof(PCIIDEState),
263 .qdev.no_user = 1,
264 .no_hotplug = 1,
265 .init = pci_piix_ide_initfn,
266 .exit = pci_piix_ide_exitfn,
267 .vendor_id = PCI_VENDOR_ID_INTEL,
268 .device_id = PCI_DEVICE_ID_INTEL_82371AB,
269 .class_id = PCI_CLASS_STORAGE_IDE,
271 /* end of list */
275 static void piix_ide_register(void)
277 pci_qdev_register_many(piix_ide_info);
279 device_init(piix_ide_register);