loader: rename in_ram/has_mr
[qemu.git] / block.c
blobf1ef4b0109dbededb10b26552670d1fee60579aa
1 /*
2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
53 struct BdrvDirtyBitmap {
54 HBitmap *bitmap;
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
69 QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
72 QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80 int64_t sector_num,
81 QEMUIOVector *qiov,
82 int nb_sectors,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
85 void *opaque,
86 bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108 filename[1] == ':');
111 int is_windows_drive(const char *filename)
113 if (is_windows_drive_prefix(filename) &&
114 filename[2] == '\0')
115 return 1;
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
118 return 1;
119 return 0;
121 #endif
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125 ThrottleConfig *cfg)
127 int i;
129 throttle_config(&bs->throttle_state, cfg);
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
141 int i;
143 bs->io_limits_enabled = false;
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147 drained = true;
151 bs->io_limits_enabled = enabled;
153 return drained;
156 void bdrv_io_limits_disable(BlockDriverState *bs)
158 bs->io_limits_enabled = false;
160 bdrv_start_throttled_reqs(bs);
162 throttle_destroy(&bs->throttle_state);
165 static void bdrv_throttle_read_timer_cb(void *opaque)
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque)
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
182 QEMU_CLOCK_VIRTUAL,
183 bdrv_throttle_read_timer_cb,
184 bdrv_throttle_write_timer_cb,
185 bs);
186 bs->io_limits_enabled = true;
189 /* This function makes an IO wait if needed
191 * @nb_sectors: the number of sectors of the IO
192 * @is_write: is the IO a write
194 static void bdrv_io_limits_intercept(BlockDriverState *bs,
195 unsigned int bytes,
196 bool is_write)
198 /* does this io must wait */
199 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
201 /* if must wait or any request of this type throttled queue the IO */
202 if (must_wait ||
203 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
204 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
207 /* the IO will be executed, do the accounting */
208 throttle_account(&bs->throttle_state, is_write, bytes);
211 /* if the next request must wait -> do nothing */
212 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
213 return;
216 /* else queue next request for execution */
217 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
220 size_t bdrv_opt_mem_align(BlockDriverState *bs)
222 if (!bs || !bs->drv) {
223 /* 4k should be on the safe side */
224 return 4096;
227 return bs->bl.opt_mem_alignment;
230 /* check if the path starts with "<protocol>:" */
231 static int path_has_protocol(const char *path)
233 const char *p;
235 #ifdef _WIN32
236 if (is_windows_drive(path) ||
237 is_windows_drive_prefix(path)) {
238 return 0;
240 p = path + strcspn(path, ":/\\");
241 #else
242 p = path + strcspn(path, ":/");
243 #endif
245 return *p == ':';
248 int path_is_absolute(const char *path)
250 #ifdef _WIN32
251 /* specific case for names like: "\\.\d:" */
252 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
253 return 1;
255 return (*path == '/' || *path == '\\');
256 #else
257 return (*path == '/');
258 #endif
261 /* if filename is absolute, just copy it to dest. Otherwise, build a
262 path to it by considering it is relative to base_path. URL are
263 supported. */
264 void path_combine(char *dest, int dest_size,
265 const char *base_path,
266 const char *filename)
268 const char *p, *p1;
269 int len;
271 if (dest_size <= 0)
272 return;
273 if (path_is_absolute(filename)) {
274 pstrcpy(dest, dest_size, filename);
275 } else {
276 p = strchr(base_path, ':');
277 if (p)
278 p++;
279 else
280 p = base_path;
281 p1 = strrchr(base_path, '/');
282 #ifdef _WIN32
284 const char *p2;
285 p2 = strrchr(base_path, '\\');
286 if (!p1 || p2 > p1)
287 p1 = p2;
289 #endif
290 if (p1)
291 p1++;
292 else
293 p1 = base_path;
294 if (p1 > p)
295 p = p1;
296 len = p - base_path;
297 if (len > dest_size - 1)
298 len = dest_size - 1;
299 memcpy(dest, base_path, len);
300 dest[len] = '\0';
301 pstrcat(dest, dest_size, filename);
305 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
307 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
308 pstrcpy(dest, sz, bs->backing_file);
309 } else {
310 path_combine(dest, sz, bs->filename, bs->backing_file);
314 void bdrv_register(BlockDriver *bdrv)
316 /* Block drivers without coroutine functions need emulation */
317 if (!bdrv->bdrv_co_readv) {
318 bdrv->bdrv_co_readv = bdrv_co_readv_em;
319 bdrv->bdrv_co_writev = bdrv_co_writev_em;
321 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
322 * the block driver lacks aio we need to emulate that too.
324 if (!bdrv->bdrv_aio_readv) {
325 /* add AIO emulation layer */
326 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
327 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
331 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
334 /* create a new block device (by default it is empty) */
335 BlockDriverState *bdrv_new(const char *device_name)
337 BlockDriverState *bs;
339 bs = g_malloc0(sizeof(BlockDriverState));
340 QLIST_INIT(&bs->dirty_bitmaps);
341 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
342 if (device_name[0] != '\0') {
343 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
345 bdrv_iostatus_disable(bs);
346 notifier_list_init(&bs->close_notifiers);
347 notifier_with_return_list_init(&bs->before_write_notifiers);
348 qemu_co_queue_init(&bs->throttled_reqs[0]);
349 qemu_co_queue_init(&bs->throttled_reqs[1]);
350 bs->refcnt = 1;
352 return bs;
355 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
357 notifier_list_add(&bs->close_notifiers, notify);
360 BlockDriver *bdrv_find_format(const char *format_name)
362 BlockDriver *drv1;
363 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
364 if (!strcmp(drv1->format_name, format_name)) {
365 return drv1;
368 return NULL;
371 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
373 static const char *whitelist_rw[] = {
374 CONFIG_BDRV_RW_WHITELIST
376 static const char *whitelist_ro[] = {
377 CONFIG_BDRV_RO_WHITELIST
379 const char **p;
381 if (!whitelist_rw[0] && !whitelist_ro[0]) {
382 return 1; /* no whitelist, anything goes */
385 for (p = whitelist_rw; *p; p++) {
386 if (!strcmp(drv->format_name, *p)) {
387 return 1;
390 if (read_only) {
391 for (p = whitelist_ro; *p; p++) {
392 if (!strcmp(drv->format_name, *p)) {
393 return 1;
397 return 0;
400 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
401 bool read_only)
403 BlockDriver *drv = bdrv_find_format(format_name);
404 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
407 typedef struct CreateCo {
408 BlockDriver *drv;
409 char *filename;
410 QEMUOptionParameter *options;
411 int ret;
412 Error *err;
413 } CreateCo;
415 static void coroutine_fn bdrv_create_co_entry(void *opaque)
417 Error *local_err = NULL;
418 int ret;
420 CreateCo *cco = opaque;
421 assert(cco->drv);
423 ret = cco->drv->bdrv_create(cco->filename, cco->options, &local_err);
424 if (local_err) {
425 error_propagate(&cco->err, local_err);
427 cco->ret = ret;
430 int bdrv_create(BlockDriver *drv, const char* filename,
431 QEMUOptionParameter *options, Error **errp)
433 int ret;
435 Coroutine *co;
436 CreateCo cco = {
437 .drv = drv,
438 .filename = g_strdup(filename),
439 .options = options,
440 .ret = NOT_DONE,
441 .err = NULL,
444 if (!drv->bdrv_create) {
445 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
446 ret = -ENOTSUP;
447 goto out;
450 if (qemu_in_coroutine()) {
451 /* Fast-path if already in coroutine context */
452 bdrv_create_co_entry(&cco);
453 } else {
454 co = qemu_coroutine_create(bdrv_create_co_entry);
455 qemu_coroutine_enter(co, &cco);
456 while (cco.ret == NOT_DONE) {
457 qemu_aio_wait();
461 ret = cco.ret;
462 if (ret < 0) {
463 if (cco.err) {
464 error_propagate(errp, cco.err);
465 } else {
466 error_setg_errno(errp, -ret, "Could not create image");
470 out:
471 g_free(cco.filename);
472 return ret;
475 int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
476 Error **errp)
478 BlockDriver *drv;
479 Error *local_err = NULL;
480 int ret;
482 drv = bdrv_find_protocol(filename, true);
483 if (drv == NULL) {
484 error_setg(errp, "Could not find protocol for file '%s'", filename);
485 return -ENOENT;
488 ret = bdrv_create(drv, filename, options, &local_err);
489 if (local_err) {
490 error_propagate(errp, local_err);
492 return ret;
495 int bdrv_refresh_limits(BlockDriverState *bs)
497 BlockDriver *drv = bs->drv;
499 memset(&bs->bl, 0, sizeof(bs->bl));
501 if (!drv) {
502 return 0;
505 /* Take some limits from the children as a default */
506 if (bs->file) {
507 bdrv_refresh_limits(bs->file);
508 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
509 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
510 } else {
511 bs->bl.opt_mem_alignment = 512;
514 if (bs->backing_hd) {
515 bdrv_refresh_limits(bs->backing_hd);
516 bs->bl.opt_transfer_length =
517 MAX(bs->bl.opt_transfer_length,
518 bs->backing_hd->bl.opt_transfer_length);
519 bs->bl.opt_mem_alignment =
520 MAX(bs->bl.opt_mem_alignment,
521 bs->backing_hd->bl.opt_mem_alignment);
524 /* Then let the driver override it */
525 if (drv->bdrv_refresh_limits) {
526 return drv->bdrv_refresh_limits(bs);
529 return 0;
533 * Create a uniquely-named empty temporary file.
534 * Return 0 upon success, otherwise a negative errno value.
536 int get_tmp_filename(char *filename, int size)
538 #ifdef _WIN32
539 char temp_dir[MAX_PATH];
540 /* GetTempFileName requires that its output buffer (4th param)
541 have length MAX_PATH or greater. */
542 assert(size >= MAX_PATH);
543 return (GetTempPath(MAX_PATH, temp_dir)
544 && GetTempFileName(temp_dir, "qem", 0, filename)
545 ? 0 : -GetLastError());
546 #else
547 int fd;
548 const char *tmpdir;
549 tmpdir = getenv("TMPDIR");
550 if (!tmpdir) {
551 tmpdir = "/var/tmp";
553 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
554 return -EOVERFLOW;
556 fd = mkstemp(filename);
557 if (fd < 0) {
558 return -errno;
560 if (close(fd) != 0) {
561 unlink(filename);
562 return -errno;
564 return 0;
565 #endif
569 * Detect host devices. By convention, /dev/cdrom[N] is always
570 * recognized as a host CDROM.
572 static BlockDriver *find_hdev_driver(const char *filename)
574 int score_max = 0, score;
575 BlockDriver *drv = NULL, *d;
577 QLIST_FOREACH(d, &bdrv_drivers, list) {
578 if (d->bdrv_probe_device) {
579 score = d->bdrv_probe_device(filename);
580 if (score > score_max) {
581 score_max = score;
582 drv = d;
587 return drv;
590 BlockDriver *bdrv_find_protocol(const char *filename,
591 bool allow_protocol_prefix)
593 BlockDriver *drv1;
594 char protocol[128];
595 int len;
596 const char *p;
598 /* TODO Drivers without bdrv_file_open must be specified explicitly */
601 * XXX(hch): we really should not let host device detection
602 * override an explicit protocol specification, but moving this
603 * later breaks access to device names with colons in them.
604 * Thanks to the brain-dead persistent naming schemes on udev-
605 * based Linux systems those actually are quite common.
607 drv1 = find_hdev_driver(filename);
608 if (drv1) {
609 return drv1;
612 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
613 return bdrv_find_format("file");
616 p = strchr(filename, ':');
617 assert(p != NULL);
618 len = p - filename;
619 if (len > sizeof(protocol) - 1)
620 len = sizeof(protocol) - 1;
621 memcpy(protocol, filename, len);
622 protocol[len] = '\0';
623 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
624 if (drv1->protocol_name &&
625 !strcmp(drv1->protocol_name, protocol)) {
626 return drv1;
629 return NULL;
632 static int find_image_format(BlockDriverState *bs, const char *filename,
633 BlockDriver **pdrv, Error **errp)
635 int score, score_max;
636 BlockDriver *drv1, *drv;
637 uint8_t buf[2048];
638 int ret = 0;
640 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
641 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
642 drv = bdrv_find_format("raw");
643 if (!drv) {
644 error_setg(errp, "Could not find raw image format");
645 ret = -ENOENT;
647 *pdrv = drv;
648 return ret;
651 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
652 if (ret < 0) {
653 error_setg_errno(errp, -ret, "Could not read image for determining its "
654 "format");
655 *pdrv = NULL;
656 return ret;
659 score_max = 0;
660 drv = NULL;
661 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
662 if (drv1->bdrv_probe) {
663 score = drv1->bdrv_probe(buf, ret, filename);
664 if (score > score_max) {
665 score_max = score;
666 drv = drv1;
670 if (!drv) {
671 error_setg(errp, "Could not determine image format: No compatible "
672 "driver found");
673 ret = -ENOENT;
675 *pdrv = drv;
676 return ret;
680 * Set the current 'total_sectors' value
682 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
684 BlockDriver *drv = bs->drv;
686 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
687 if (bs->sg)
688 return 0;
690 /* query actual device if possible, otherwise just trust the hint */
691 if (drv->bdrv_getlength) {
692 int64_t length = drv->bdrv_getlength(bs);
693 if (length < 0) {
694 return length;
696 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
699 bs->total_sectors = hint;
700 return 0;
704 * Set open flags for a given discard mode
706 * Return 0 on success, -1 if the discard mode was invalid.
708 int bdrv_parse_discard_flags(const char *mode, int *flags)
710 *flags &= ~BDRV_O_UNMAP;
712 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
713 /* do nothing */
714 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
715 *flags |= BDRV_O_UNMAP;
716 } else {
717 return -1;
720 return 0;
724 * Set open flags for a given cache mode
726 * Return 0 on success, -1 if the cache mode was invalid.
728 int bdrv_parse_cache_flags(const char *mode, int *flags)
730 *flags &= ~BDRV_O_CACHE_MASK;
732 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
733 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
734 } else if (!strcmp(mode, "directsync")) {
735 *flags |= BDRV_O_NOCACHE;
736 } else if (!strcmp(mode, "writeback")) {
737 *flags |= BDRV_O_CACHE_WB;
738 } else if (!strcmp(mode, "unsafe")) {
739 *flags |= BDRV_O_CACHE_WB;
740 *flags |= BDRV_O_NO_FLUSH;
741 } else if (!strcmp(mode, "writethrough")) {
742 /* this is the default */
743 } else {
744 return -1;
747 return 0;
751 * The copy-on-read flag is actually a reference count so multiple users may
752 * use the feature without worrying about clobbering its previous state.
753 * Copy-on-read stays enabled until all users have called to disable it.
755 void bdrv_enable_copy_on_read(BlockDriverState *bs)
757 bs->copy_on_read++;
760 void bdrv_disable_copy_on_read(BlockDriverState *bs)
762 assert(bs->copy_on_read > 0);
763 bs->copy_on_read--;
766 static int bdrv_open_flags(BlockDriverState *bs, int flags)
768 int open_flags = flags | BDRV_O_CACHE_WB;
771 * Clear flags that are internal to the block layer before opening the
772 * image.
774 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
777 * Snapshots should be writable.
779 if (bs->is_temporary) {
780 open_flags |= BDRV_O_RDWR;
783 return open_flags;
786 static int bdrv_assign_node_name(BlockDriverState *bs,
787 const char *node_name,
788 Error **errp)
790 if (!node_name) {
791 return 0;
794 /* empty string node name is invalid */
795 if (node_name[0] == '\0') {
796 error_setg(errp, "Empty node name");
797 return -EINVAL;
800 /* takes care of avoiding namespaces collisions */
801 if (bdrv_find(node_name)) {
802 error_setg(errp, "node-name=%s is conflicting with a device id",
803 node_name);
804 return -EINVAL;
807 /* takes care of avoiding duplicates node names */
808 if (bdrv_find_node(node_name)) {
809 error_setg(errp, "Duplicate node name");
810 return -EINVAL;
813 /* copy node name into the bs and insert it into the graph list */
814 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
815 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
817 return 0;
821 * Common part for opening disk images and files
823 * Removes all processed options from *options.
825 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
826 QDict *options, int flags, BlockDriver *drv, Error **errp)
828 int ret, open_flags;
829 const char *filename;
830 const char *node_name = NULL;
831 Error *local_err = NULL;
833 assert(drv != NULL);
834 assert(bs->file == NULL);
835 assert(options != NULL && bs->options != options);
837 if (file != NULL) {
838 filename = file->filename;
839 } else {
840 filename = qdict_get_try_str(options, "filename");
843 if (drv->bdrv_needs_filename && !filename) {
844 error_setg(errp, "The '%s' block driver requires a file name",
845 drv->format_name);
846 return -EINVAL;
849 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
851 node_name = qdict_get_try_str(options, "node-name");
852 ret = bdrv_assign_node_name(bs, node_name, errp);
853 if (ret < 0) {
854 return ret;
856 qdict_del(options, "node-name");
858 /* bdrv_open() with directly using a protocol as drv. This layer is already
859 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
860 * and return immediately. */
861 if (file != NULL && drv->bdrv_file_open) {
862 bdrv_swap(file, bs);
863 return 0;
866 bs->open_flags = flags;
867 bs->guest_block_size = 512;
868 bs->request_alignment = 512;
869 bs->zero_beyond_eof = true;
870 open_flags = bdrv_open_flags(bs, flags);
871 bs->read_only = !(open_flags & BDRV_O_RDWR);
873 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
874 error_setg(errp,
875 !bs->read_only && bdrv_is_whitelisted(drv, true)
876 ? "Driver '%s' can only be used for read-only devices"
877 : "Driver '%s' is not whitelisted",
878 drv->format_name);
879 return -ENOTSUP;
882 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
883 if (flags & BDRV_O_COPY_ON_READ) {
884 if (!bs->read_only) {
885 bdrv_enable_copy_on_read(bs);
886 } else {
887 error_setg(errp, "Can't use copy-on-read on read-only device");
888 return -EINVAL;
892 if (filename != NULL) {
893 pstrcpy(bs->filename, sizeof(bs->filename), filename);
894 } else {
895 bs->filename[0] = '\0';
898 bs->drv = drv;
899 bs->opaque = g_malloc0(drv->instance_size);
901 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
903 /* Open the image, either directly or using a protocol */
904 if (drv->bdrv_file_open) {
905 assert(file == NULL);
906 assert(!drv->bdrv_needs_filename || filename != NULL);
907 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
908 } else {
909 if (file == NULL) {
910 error_setg(errp, "Can't use '%s' as a block driver for the "
911 "protocol level", drv->format_name);
912 ret = -EINVAL;
913 goto free_and_fail;
915 bs->file = file;
916 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
919 if (ret < 0) {
920 if (local_err) {
921 error_propagate(errp, local_err);
922 } else if (bs->filename[0]) {
923 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
924 } else {
925 error_setg_errno(errp, -ret, "Could not open image");
927 goto free_and_fail;
930 ret = refresh_total_sectors(bs, bs->total_sectors);
931 if (ret < 0) {
932 error_setg_errno(errp, -ret, "Could not refresh total sector count");
933 goto free_and_fail;
936 bdrv_refresh_limits(bs);
937 assert(bdrv_opt_mem_align(bs) != 0);
938 assert((bs->request_alignment != 0) || bs->sg);
940 #ifndef _WIN32
941 if (bs->is_temporary) {
942 assert(bs->filename[0] != '\0');
943 unlink(bs->filename);
945 #endif
946 return 0;
948 free_and_fail:
949 bs->file = NULL;
950 g_free(bs->opaque);
951 bs->opaque = NULL;
952 bs->drv = NULL;
953 return ret;
957 * Opens a file using a protocol (file, host_device, nbd, ...)
959 * options is an indirect pointer to a QDict of options to pass to the block
960 * drivers, or pointer to NULL for an empty set of options. If this function
961 * takes ownership of the QDict reference, it will set *options to NULL;
962 * otherwise, it will contain unused/unrecognized options after this function
963 * returns. Then, the caller is responsible for freeing it. If it intends to
964 * reuse the QDict, QINCREF() should be called beforehand.
966 static int bdrv_file_open(BlockDriverState *bs, const char *filename,
967 QDict **options, int flags, Error **errp)
969 BlockDriver *drv;
970 const char *drvname;
971 bool allow_protocol_prefix = false;
972 Error *local_err = NULL;
973 int ret;
975 /* Fetch the file name from the options QDict if necessary */
976 if (!filename) {
977 filename = qdict_get_try_str(*options, "filename");
978 } else if (filename && !qdict_haskey(*options, "filename")) {
979 qdict_put(*options, "filename", qstring_from_str(filename));
980 allow_protocol_prefix = true;
981 } else {
982 error_setg(errp, "Can't specify 'file' and 'filename' options at the "
983 "same time");
984 ret = -EINVAL;
985 goto fail;
988 /* Find the right block driver */
989 drvname = qdict_get_try_str(*options, "driver");
990 if (drvname) {
991 drv = bdrv_find_format(drvname);
992 if (!drv) {
993 error_setg(errp, "Unknown driver '%s'", drvname);
995 qdict_del(*options, "driver");
996 } else if (filename) {
997 drv = bdrv_find_protocol(filename, allow_protocol_prefix);
998 if (!drv) {
999 error_setg(errp, "Unknown protocol");
1001 } else {
1002 error_setg(errp, "Must specify either driver or file");
1003 drv = NULL;
1006 if (!drv) {
1007 /* errp has been set already */
1008 ret = -ENOENT;
1009 goto fail;
1012 /* Parse the filename and open it */
1013 if (drv->bdrv_parse_filename && filename) {
1014 drv->bdrv_parse_filename(filename, *options, &local_err);
1015 if (local_err) {
1016 error_propagate(errp, local_err);
1017 ret = -EINVAL;
1018 goto fail;
1021 if (!drv->bdrv_needs_filename) {
1022 qdict_del(*options, "filename");
1023 } else {
1024 filename = qdict_get_str(*options, "filename");
1028 if (!drv->bdrv_file_open) {
1029 ret = bdrv_open(&bs, filename, NULL, *options, flags, drv, &local_err);
1030 *options = NULL;
1031 } else {
1032 ret = bdrv_open_common(bs, NULL, *options, flags, drv, &local_err);
1034 if (ret < 0) {
1035 error_propagate(errp, local_err);
1036 goto fail;
1039 bs->growable = 1;
1040 return 0;
1042 fail:
1043 return ret;
1047 * Opens the backing file for a BlockDriverState if not yet open
1049 * options is a QDict of options to pass to the block drivers, or NULL for an
1050 * empty set of options. The reference to the QDict is transferred to this
1051 * function (even on failure), so if the caller intends to reuse the dictionary,
1052 * it needs to use QINCREF() before calling bdrv_file_open.
1054 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1056 char backing_filename[PATH_MAX];
1057 int back_flags, ret;
1058 BlockDriver *back_drv = NULL;
1059 Error *local_err = NULL;
1061 if (bs->backing_hd != NULL) {
1062 QDECREF(options);
1063 return 0;
1066 /* NULL means an empty set of options */
1067 if (options == NULL) {
1068 options = qdict_new();
1071 bs->open_flags &= ~BDRV_O_NO_BACKING;
1072 if (qdict_haskey(options, "file.filename")) {
1073 backing_filename[0] = '\0';
1074 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1075 QDECREF(options);
1076 return 0;
1077 } else {
1078 bdrv_get_full_backing_filename(bs, backing_filename,
1079 sizeof(backing_filename));
1082 if (bs->backing_format[0] != '\0') {
1083 back_drv = bdrv_find_format(bs->backing_format);
1086 /* backing files always opened read-only */
1087 back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT |
1088 BDRV_O_COPY_ON_READ);
1090 assert(bs->backing_hd == NULL);
1091 ret = bdrv_open(&bs->backing_hd,
1092 *backing_filename ? backing_filename : NULL, NULL, options,
1093 back_flags, back_drv, &local_err);
1094 if (ret < 0) {
1095 bs->backing_hd = NULL;
1096 bs->open_flags |= BDRV_O_NO_BACKING;
1097 error_setg(errp, "Could not open backing file: %s",
1098 error_get_pretty(local_err));
1099 error_free(local_err);
1100 return ret;
1103 if (bs->backing_hd->file) {
1104 pstrcpy(bs->backing_file, sizeof(bs->backing_file),
1105 bs->backing_hd->file->filename);
1108 /* Recalculate the BlockLimits with the backing file */
1109 bdrv_refresh_limits(bs);
1111 return 0;
1115 * Opens a disk image whose options are given as BlockdevRef in another block
1116 * device's options.
1118 * If allow_none is true, no image will be opened if filename is false and no
1119 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1121 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1122 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1123 * itself, all options starting with "${bdref_key}." are considered part of the
1124 * BlockdevRef.
1126 * The BlockdevRef will be removed from the options QDict.
1128 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1130 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1131 QDict *options, const char *bdref_key, int flags,
1132 bool allow_none, Error **errp)
1134 QDict *image_options;
1135 int ret;
1136 char *bdref_key_dot;
1137 const char *reference;
1139 assert(pbs);
1140 assert(*pbs == NULL);
1142 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1143 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1144 g_free(bdref_key_dot);
1146 reference = qdict_get_try_str(options, bdref_key);
1147 if (!filename && !reference && !qdict_size(image_options)) {
1148 if (allow_none) {
1149 ret = 0;
1150 } else {
1151 error_setg(errp, "A block device must be specified for \"%s\"",
1152 bdref_key);
1153 ret = -EINVAL;
1155 goto done;
1158 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1160 done:
1161 qdict_del(options, bdref_key);
1162 return ret;
1166 * Opens a disk image (raw, qcow2, vmdk, ...)
1168 * options is a QDict of options to pass to the block drivers, or NULL for an
1169 * empty set of options. The reference to the QDict belongs to the block layer
1170 * after the call (even on failure), so if the caller intends to reuse the
1171 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1173 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1174 * If it is not NULL, the referenced BDS will be reused.
1176 * The reference parameter may be used to specify an existing block device which
1177 * should be opened. If specified, neither options nor a filename may be given,
1178 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1180 int bdrv_open(BlockDriverState **pbs, const char *filename,
1181 const char *reference, QDict *options, int flags,
1182 BlockDriver *drv, Error **errp)
1184 int ret;
1185 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1186 char tmp_filename[PATH_MAX + 1];
1187 BlockDriverState *file = NULL, *bs;
1188 const char *drvname;
1189 Error *local_err = NULL;
1191 assert(pbs);
1193 if (reference) {
1194 bool options_non_empty = options ? qdict_size(options) : false;
1195 QDECREF(options);
1197 if (*pbs) {
1198 error_setg(errp, "Cannot reuse an existing BDS when referencing "
1199 "another block device");
1200 return -EINVAL;
1203 if (filename || options_non_empty) {
1204 error_setg(errp, "Cannot reference an existing block device with "
1205 "additional options or a new filename");
1206 return -EINVAL;
1209 bs = bdrv_lookup_bs(reference, reference, errp);
1210 if (!bs) {
1211 return -ENODEV;
1213 bdrv_ref(bs);
1214 *pbs = bs;
1215 return 0;
1218 if (*pbs) {
1219 bs = *pbs;
1220 } else {
1221 bs = bdrv_new("");
1224 /* NULL means an empty set of options */
1225 if (options == NULL) {
1226 options = qdict_new();
1229 bs->options = options;
1230 options = qdict_clone_shallow(options);
1232 if (flags & BDRV_O_PROTOCOL) {
1233 assert(!drv);
1234 ret = bdrv_file_open(bs, filename, &options, flags & ~BDRV_O_PROTOCOL,
1235 &local_err);
1236 if (!ret) {
1237 drv = bs->drv;
1238 goto done;
1239 } else if (bs->drv) {
1240 goto close_and_fail;
1241 } else {
1242 goto fail;
1246 /* For snapshot=on, create a temporary qcow2 overlay */
1247 if (flags & BDRV_O_SNAPSHOT) {
1248 BlockDriverState *bs1;
1249 int64_t total_size;
1250 BlockDriver *bdrv_qcow2;
1251 QEMUOptionParameter *create_options;
1252 QDict *snapshot_options;
1254 /* if snapshot, we create a temporary backing file and open it
1255 instead of opening 'filename' directly */
1257 /* Get the required size from the image */
1258 QINCREF(options);
1259 bs1 = NULL;
1260 ret = bdrv_open(&bs1, filename, NULL, options, BDRV_O_NO_BACKING,
1261 drv, &local_err);
1262 if (ret < 0) {
1263 goto fail;
1265 total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
1267 bdrv_unref(bs1);
1269 /* Create the temporary image */
1270 ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
1271 if (ret < 0) {
1272 error_setg_errno(errp, -ret, "Could not get temporary filename");
1273 goto fail;
1276 bdrv_qcow2 = bdrv_find_format("qcow2");
1277 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1278 NULL);
1280 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1282 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
1283 free_option_parameters(create_options);
1284 if (ret < 0) {
1285 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1286 "'%s': %s", tmp_filename,
1287 error_get_pretty(local_err));
1288 error_free(local_err);
1289 local_err = NULL;
1290 goto fail;
1293 /* Prepare a new options QDict for the temporary file, where user
1294 * options refer to the backing file */
1295 if (filename) {
1296 qdict_put(options, "file.filename", qstring_from_str(filename));
1298 if (drv) {
1299 qdict_put(options, "driver", qstring_from_str(drv->format_name));
1302 snapshot_options = qdict_new();
1303 qdict_put(snapshot_options, "backing", options);
1304 qdict_flatten(snapshot_options);
1306 bs->options = snapshot_options;
1307 options = qdict_clone_shallow(bs->options);
1309 filename = tmp_filename;
1310 drv = bdrv_qcow2;
1311 bs->is_temporary = 1;
1314 /* Open image file without format layer */
1315 if (flags & BDRV_O_RDWR) {
1316 flags |= BDRV_O_ALLOW_RDWR;
1319 assert(file == NULL);
1320 ret = bdrv_open_image(&file, filename, options, "file",
1321 bdrv_open_flags(bs, flags | BDRV_O_UNMAP) |
1322 BDRV_O_PROTOCOL, true, &local_err);
1323 if (ret < 0) {
1324 goto fail;
1327 /* Find the right image format driver */
1328 drvname = qdict_get_try_str(options, "driver");
1329 if (drvname) {
1330 drv = bdrv_find_format(drvname);
1331 qdict_del(options, "driver");
1332 if (!drv) {
1333 error_setg(errp, "Invalid driver: '%s'", drvname);
1334 ret = -EINVAL;
1335 goto unlink_and_fail;
1339 if (!drv) {
1340 if (file) {
1341 ret = find_image_format(file, filename, &drv, &local_err);
1342 } else {
1343 error_setg(errp, "Must specify either driver or file");
1344 ret = -EINVAL;
1345 goto unlink_and_fail;
1349 if (!drv) {
1350 goto unlink_and_fail;
1353 /* Open the image */
1354 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1355 if (ret < 0) {
1356 goto unlink_and_fail;
1359 if (file && (bs->file != file)) {
1360 bdrv_unref(file);
1361 file = NULL;
1364 /* If there is a backing file, use it */
1365 if ((flags & BDRV_O_NO_BACKING) == 0) {
1366 QDict *backing_options;
1368 qdict_extract_subqdict(options, &backing_options, "backing.");
1369 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1370 if (ret < 0) {
1371 goto close_and_fail;
1375 done:
1376 /* Check if any unknown options were used */
1377 if (options && (qdict_size(options) != 0)) {
1378 const QDictEntry *entry = qdict_first(options);
1379 if (flags & BDRV_O_PROTOCOL) {
1380 error_setg(errp, "Block protocol '%s' doesn't support the option "
1381 "'%s'", drv->format_name, entry->key);
1382 } else {
1383 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1384 "support the option '%s'", drv->format_name,
1385 bs->device_name, entry->key);
1388 ret = -EINVAL;
1389 goto close_and_fail;
1391 QDECREF(options);
1393 if (!bdrv_key_required(bs)) {
1394 bdrv_dev_change_media_cb(bs, true);
1397 *pbs = bs;
1398 return 0;
1400 unlink_and_fail:
1401 if (file != NULL) {
1402 bdrv_unref(file);
1404 if (bs->is_temporary) {
1405 unlink(filename);
1407 fail:
1408 QDECREF(bs->options);
1409 QDECREF(options);
1410 bs->options = NULL;
1411 if (!*pbs) {
1412 /* If *pbs is NULL, a new BDS has been created in this function and
1413 needs to be freed now. Otherwise, it does not need to be closed,
1414 since it has not really been opened yet. */
1415 bdrv_unref(bs);
1417 if (local_err) {
1418 error_propagate(errp, local_err);
1420 return ret;
1422 close_and_fail:
1423 /* See fail path, but now the BDS has to be always closed */
1424 if (*pbs) {
1425 bdrv_close(bs);
1426 } else {
1427 bdrv_unref(bs);
1429 QDECREF(options);
1430 if (local_err) {
1431 error_propagate(errp, local_err);
1433 return ret;
1436 typedef struct BlockReopenQueueEntry {
1437 bool prepared;
1438 BDRVReopenState state;
1439 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1440 } BlockReopenQueueEntry;
1443 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1444 * reopen of multiple devices.
1446 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1447 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1448 * be created and initialized. This newly created BlockReopenQueue should be
1449 * passed back in for subsequent calls that are intended to be of the same
1450 * atomic 'set'.
1452 * bs is the BlockDriverState to add to the reopen queue.
1454 * flags contains the open flags for the associated bs
1456 * returns a pointer to bs_queue, which is either the newly allocated
1457 * bs_queue, or the existing bs_queue being used.
1460 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1461 BlockDriverState *bs, int flags)
1463 assert(bs != NULL);
1465 BlockReopenQueueEntry *bs_entry;
1466 if (bs_queue == NULL) {
1467 bs_queue = g_new0(BlockReopenQueue, 1);
1468 QSIMPLEQ_INIT(bs_queue);
1471 if (bs->file) {
1472 bdrv_reopen_queue(bs_queue, bs->file, flags);
1475 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1476 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1478 bs_entry->state.bs = bs;
1479 bs_entry->state.flags = flags;
1481 return bs_queue;
1485 * Reopen multiple BlockDriverStates atomically & transactionally.
1487 * The queue passed in (bs_queue) must have been built up previous
1488 * via bdrv_reopen_queue().
1490 * Reopens all BDS specified in the queue, with the appropriate
1491 * flags. All devices are prepared for reopen, and failure of any
1492 * device will cause all device changes to be abandonded, and intermediate
1493 * data cleaned up.
1495 * If all devices prepare successfully, then the changes are committed
1496 * to all devices.
1499 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1501 int ret = -1;
1502 BlockReopenQueueEntry *bs_entry, *next;
1503 Error *local_err = NULL;
1505 assert(bs_queue != NULL);
1507 bdrv_drain_all();
1509 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1510 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1511 error_propagate(errp, local_err);
1512 goto cleanup;
1514 bs_entry->prepared = true;
1517 /* If we reach this point, we have success and just need to apply the
1518 * changes
1520 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1521 bdrv_reopen_commit(&bs_entry->state);
1524 ret = 0;
1526 cleanup:
1527 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1528 if (ret && bs_entry->prepared) {
1529 bdrv_reopen_abort(&bs_entry->state);
1531 g_free(bs_entry);
1533 g_free(bs_queue);
1534 return ret;
1538 /* Reopen a single BlockDriverState with the specified flags. */
1539 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1541 int ret = -1;
1542 Error *local_err = NULL;
1543 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1545 ret = bdrv_reopen_multiple(queue, &local_err);
1546 if (local_err != NULL) {
1547 error_propagate(errp, local_err);
1549 return ret;
1554 * Prepares a BlockDriverState for reopen. All changes are staged in the
1555 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1556 * the block driver layer .bdrv_reopen_prepare()
1558 * bs is the BlockDriverState to reopen
1559 * flags are the new open flags
1560 * queue is the reopen queue
1562 * Returns 0 on success, non-zero on error. On error errp will be set
1563 * as well.
1565 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1566 * It is the responsibility of the caller to then call the abort() or
1567 * commit() for any other BDS that have been left in a prepare() state
1570 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1571 Error **errp)
1573 int ret = -1;
1574 Error *local_err = NULL;
1575 BlockDriver *drv;
1577 assert(reopen_state != NULL);
1578 assert(reopen_state->bs->drv != NULL);
1579 drv = reopen_state->bs->drv;
1581 /* if we are to stay read-only, do not allow permission change
1582 * to r/w */
1583 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1584 reopen_state->flags & BDRV_O_RDWR) {
1585 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1586 reopen_state->bs->device_name);
1587 goto error;
1591 ret = bdrv_flush(reopen_state->bs);
1592 if (ret) {
1593 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1594 strerror(-ret));
1595 goto error;
1598 if (drv->bdrv_reopen_prepare) {
1599 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1600 if (ret) {
1601 if (local_err != NULL) {
1602 error_propagate(errp, local_err);
1603 } else {
1604 error_setg(errp, "failed while preparing to reopen image '%s'",
1605 reopen_state->bs->filename);
1607 goto error;
1609 } else {
1610 /* It is currently mandatory to have a bdrv_reopen_prepare()
1611 * handler for each supported drv. */
1612 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1613 drv->format_name, reopen_state->bs->device_name,
1614 "reopening of file");
1615 ret = -1;
1616 goto error;
1619 ret = 0;
1621 error:
1622 return ret;
1626 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1627 * makes them final by swapping the staging BlockDriverState contents into
1628 * the active BlockDriverState contents.
1630 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1632 BlockDriver *drv;
1634 assert(reopen_state != NULL);
1635 drv = reopen_state->bs->drv;
1636 assert(drv != NULL);
1638 /* If there are any driver level actions to take */
1639 if (drv->bdrv_reopen_commit) {
1640 drv->bdrv_reopen_commit(reopen_state);
1643 /* set BDS specific flags now */
1644 reopen_state->bs->open_flags = reopen_state->flags;
1645 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1646 BDRV_O_CACHE_WB);
1647 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1649 bdrv_refresh_limits(reopen_state->bs);
1653 * Abort the reopen, and delete and free the staged changes in
1654 * reopen_state
1656 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1658 BlockDriver *drv;
1660 assert(reopen_state != NULL);
1661 drv = reopen_state->bs->drv;
1662 assert(drv != NULL);
1664 if (drv->bdrv_reopen_abort) {
1665 drv->bdrv_reopen_abort(reopen_state);
1670 void bdrv_close(BlockDriverState *bs)
1672 if (bs->job) {
1673 block_job_cancel_sync(bs->job);
1675 bdrv_drain_all(); /* complete I/O */
1676 bdrv_flush(bs);
1677 bdrv_drain_all(); /* in case flush left pending I/O */
1678 notifier_list_notify(&bs->close_notifiers, bs);
1680 if (bs->drv) {
1681 if (bs->backing_hd) {
1682 bdrv_unref(bs->backing_hd);
1683 bs->backing_hd = NULL;
1685 bs->drv->bdrv_close(bs);
1686 g_free(bs->opaque);
1687 #ifdef _WIN32
1688 if (bs->is_temporary) {
1689 unlink(bs->filename);
1691 #endif
1692 bs->opaque = NULL;
1693 bs->drv = NULL;
1694 bs->copy_on_read = 0;
1695 bs->backing_file[0] = '\0';
1696 bs->backing_format[0] = '\0';
1697 bs->total_sectors = 0;
1698 bs->encrypted = 0;
1699 bs->valid_key = 0;
1700 bs->sg = 0;
1701 bs->growable = 0;
1702 bs->zero_beyond_eof = false;
1703 QDECREF(bs->options);
1704 bs->options = NULL;
1706 if (bs->file != NULL) {
1707 bdrv_unref(bs->file);
1708 bs->file = NULL;
1712 bdrv_dev_change_media_cb(bs, false);
1714 /*throttling disk I/O limits*/
1715 if (bs->io_limits_enabled) {
1716 bdrv_io_limits_disable(bs);
1720 void bdrv_close_all(void)
1722 BlockDriverState *bs;
1724 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1725 bdrv_close(bs);
1729 /* Check if any requests are in-flight (including throttled requests) */
1730 static bool bdrv_requests_pending(BlockDriverState *bs)
1732 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1733 return true;
1735 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1736 return true;
1738 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1739 return true;
1741 if (bs->file && bdrv_requests_pending(bs->file)) {
1742 return true;
1744 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1745 return true;
1747 return false;
1750 static bool bdrv_requests_pending_all(void)
1752 BlockDriverState *bs;
1753 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1754 if (bdrv_requests_pending(bs)) {
1755 return true;
1758 return false;
1762 * Wait for pending requests to complete across all BlockDriverStates
1764 * This function does not flush data to disk, use bdrv_flush_all() for that
1765 * after calling this function.
1767 * Note that completion of an asynchronous I/O operation can trigger any
1768 * number of other I/O operations on other devices---for example a coroutine
1769 * can be arbitrarily complex and a constant flow of I/O can come until the
1770 * coroutine is complete. Because of this, it is not possible to have a
1771 * function to drain a single device's I/O queue.
1773 void bdrv_drain_all(void)
1775 /* Always run first iteration so any pending completion BHs run */
1776 bool busy = true;
1777 BlockDriverState *bs;
1779 while (busy) {
1780 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1781 bdrv_start_throttled_reqs(bs);
1784 busy = bdrv_requests_pending_all();
1785 busy |= aio_poll(qemu_get_aio_context(), busy);
1789 /* make a BlockDriverState anonymous by removing from bdrv_state and
1790 * graph_bdrv_state list.
1791 Also, NULL terminate the device_name to prevent double remove */
1792 void bdrv_make_anon(BlockDriverState *bs)
1794 if (bs->device_name[0] != '\0') {
1795 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1797 bs->device_name[0] = '\0';
1798 if (bs->node_name[0] != '\0') {
1799 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1801 bs->node_name[0] = '\0';
1804 static void bdrv_rebind(BlockDriverState *bs)
1806 if (bs->drv && bs->drv->bdrv_rebind) {
1807 bs->drv->bdrv_rebind(bs);
1811 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1812 BlockDriverState *bs_src)
1814 /* move some fields that need to stay attached to the device */
1815 bs_dest->open_flags = bs_src->open_flags;
1817 /* dev info */
1818 bs_dest->dev_ops = bs_src->dev_ops;
1819 bs_dest->dev_opaque = bs_src->dev_opaque;
1820 bs_dest->dev = bs_src->dev;
1821 bs_dest->guest_block_size = bs_src->guest_block_size;
1822 bs_dest->copy_on_read = bs_src->copy_on_read;
1824 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1826 /* i/o throttled req */
1827 memcpy(&bs_dest->throttle_state,
1828 &bs_src->throttle_state,
1829 sizeof(ThrottleState));
1830 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1831 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1832 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1834 /* r/w error */
1835 bs_dest->on_read_error = bs_src->on_read_error;
1836 bs_dest->on_write_error = bs_src->on_write_error;
1838 /* i/o status */
1839 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1840 bs_dest->iostatus = bs_src->iostatus;
1842 /* dirty bitmap */
1843 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1845 /* reference count */
1846 bs_dest->refcnt = bs_src->refcnt;
1848 /* job */
1849 bs_dest->in_use = bs_src->in_use;
1850 bs_dest->job = bs_src->job;
1852 /* keep the same entry in bdrv_states */
1853 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1854 bs_src->device_name);
1855 bs_dest->device_list = bs_src->device_list;
1859 * Swap bs contents for two image chains while they are live,
1860 * while keeping required fields on the BlockDriverState that is
1861 * actually attached to a device.
1863 * This will modify the BlockDriverState fields, and swap contents
1864 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1866 * bs_new is required to be anonymous.
1868 * This function does not create any image files.
1870 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1872 BlockDriverState tmp;
1874 /* The code needs to swap the node_name but simply swapping node_list won't
1875 * work so first remove the nodes from the graph list, do the swap then
1876 * insert them back if needed.
1878 if (bs_new->node_name[0] != '\0') {
1879 QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
1881 if (bs_old->node_name[0] != '\0') {
1882 QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
1885 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1886 assert(bs_new->device_name[0] == '\0');
1887 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
1888 assert(bs_new->job == NULL);
1889 assert(bs_new->dev == NULL);
1890 assert(bs_new->in_use == 0);
1891 assert(bs_new->io_limits_enabled == false);
1892 assert(!throttle_have_timer(&bs_new->throttle_state));
1894 tmp = *bs_new;
1895 *bs_new = *bs_old;
1896 *bs_old = tmp;
1898 /* there are some fields that should not be swapped, move them back */
1899 bdrv_move_feature_fields(&tmp, bs_old);
1900 bdrv_move_feature_fields(bs_old, bs_new);
1901 bdrv_move_feature_fields(bs_new, &tmp);
1903 /* bs_new shouldn't be in bdrv_states even after the swap! */
1904 assert(bs_new->device_name[0] == '\0');
1906 /* Check a few fields that should remain attached to the device */
1907 assert(bs_new->dev == NULL);
1908 assert(bs_new->job == NULL);
1909 assert(bs_new->in_use == 0);
1910 assert(bs_new->io_limits_enabled == false);
1911 assert(!throttle_have_timer(&bs_new->throttle_state));
1913 /* insert the nodes back into the graph node list if needed */
1914 if (bs_new->node_name[0] != '\0') {
1915 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
1917 if (bs_old->node_name[0] != '\0') {
1918 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
1921 bdrv_rebind(bs_new);
1922 bdrv_rebind(bs_old);
1926 * Add new bs contents at the top of an image chain while the chain is
1927 * live, while keeping required fields on the top layer.
1929 * This will modify the BlockDriverState fields, and swap contents
1930 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1932 * bs_new is required to be anonymous.
1934 * This function does not create any image files.
1936 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1938 bdrv_swap(bs_new, bs_top);
1940 /* The contents of 'tmp' will become bs_top, as we are
1941 * swapping bs_new and bs_top contents. */
1942 bs_top->backing_hd = bs_new;
1943 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1944 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1945 bs_new->filename);
1946 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1947 bs_new->drv ? bs_new->drv->format_name : "");
1950 static void bdrv_delete(BlockDriverState *bs)
1952 assert(!bs->dev);
1953 assert(!bs->job);
1954 assert(!bs->in_use);
1955 assert(!bs->refcnt);
1956 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
1958 bdrv_close(bs);
1960 /* remove from list, if necessary */
1961 bdrv_make_anon(bs);
1963 g_free(bs);
1966 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1967 /* TODO change to DeviceState *dev when all users are qdevified */
1969 if (bs->dev) {
1970 return -EBUSY;
1972 bs->dev = dev;
1973 bdrv_iostatus_reset(bs);
1974 return 0;
1977 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1978 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
1980 if (bdrv_attach_dev(bs, dev) < 0) {
1981 abort();
1985 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
1986 /* TODO change to DeviceState *dev when all users are qdevified */
1988 assert(bs->dev == dev);
1989 bs->dev = NULL;
1990 bs->dev_ops = NULL;
1991 bs->dev_opaque = NULL;
1992 bs->guest_block_size = 512;
1995 /* TODO change to return DeviceState * when all users are qdevified */
1996 void *bdrv_get_attached_dev(BlockDriverState *bs)
1998 return bs->dev;
2001 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2002 void *opaque)
2004 bs->dev_ops = ops;
2005 bs->dev_opaque = opaque;
2008 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
2009 enum MonitorEvent ev,
2010 BlockErrorAction action, bool is_read)
2012 QObject *data;
2013 const char *action_str;
2015 switch (action) {
2016 case BDRV_ACTION_REPORT:
2017 action_str = "report";
2018 break;
2019 case BDRV_ACTION_IGNORE:
2020 action_str = "ignore";
2021 break;
2022 case BDRV_ACTION_STOP:
2023 action_str = "stop";
2024 break;
2025 default:
2026 abort();
2029 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
2030 bdrv->device_name,
2031 action_str,
2032 is_read ? "read" : "write");
2033 monitor_protocol_event(ev, data);
2035 qobject_decref(data);
2038 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
2040 QObject *data;
2042 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2043 bdrv_get_device_name(bs), ejected);
2044 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
2046 qobject_decref(data);
2049 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2051 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2052 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2053 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2054 if (tray_was_closed) {
2055 /* tray open */
2056 bdrv_emit_qmp_eject_event(bs, true);
2058 if (load) {
2059 /* tray close */
2060 bdrv_emit_qmp_eject_event(bs, false);
2065 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2067 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2070 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2072 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2073 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2077 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2079 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2080 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2082 return false;
2085 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2087 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2088 bs->dev_ops->resize_cb(bs->dev_opaque);
2092 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2094 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2095 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2097 return false;
2101 * Run consistency checks on an image
2103 * Returns 0 if the check could be completed (it doesn't mean that the image is
2104 * free of errors) or -errno when an internal error occurred. The results of the
2105 * check are stored in res.
2107 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2109 if (bs->drv->bdrv_check == NULL) {
2110 return -ENOTSUP;
2113 memset(res, 0, sizeof(*res));
2114 return bs->drv->bdrv_check(bs, res, fix);
2117 #define COMMIT_BUF_SECTORS 2048
2119 /* commit COW file into the raw image */
2120 int bdrv_commit(BlockDriverState *bs)
2122 BlockDriver *drv = bs->drv;
2123 int64_t sector, total_sectors, length, backing_length;
2124 int n, ro, open_flags;
2125 int ret = 0;
2126 uint8_t *buf = NULL;
2127 char filename[PATH_MAX];
2129 if (!drv)
2130 return -ENOMEDIUM;
2132 if (!bs->backing_hd) {
2133 return -ENOTSUP;
2136 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
2137 return -EBUSY;
2140 ro = bs->backing_hd->read_only;
2141 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2142 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2143 open_flags = bs->backing_hd->open_flags;
2145 if (ro) {
2146 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2147 return -EACCES;
2151 length = bdrv_getlength(bs);
2152 if (length < 0) {
2153 ret = length;
2154 goto ro_cleanup;
2157 backing_length = bdrv_getlength(bs->backing_hd);
2158 if (backing_length < 0) {
2159 ret = backing_length;
2160 goto ro_cleanup;
2163 /* If our top snapshot is larger than the backing file image,
2164 * grow the backing file image if possible. If not possible,
2165 * we must return an error */
2166 if (length > backing_length) {
2167 ret = bdrv_truncate(bs->backing_hd, length);
2168 if (ret < 0) {
2169 goto ro_cleanup;
2173 total_sectors = length >> BDRV_SECTOR_BITS;
2174 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2176 for (sector = 0; sector < total_sectors; sector += n) {
2177 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2178 if (ret < 0) {
2179 goto ro_cleanup;
2181 if (ret) {
2182 ret = bdrv_read(bs, sector, buf, n);
2183 if (ret < 0) {
2184 goto ro_cleanup;
2187 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2188 if (ret < 0) {
2189 goto ro_cleanup;
2194 if (drv->bdrv_make_empty) {
2195 ret = drv->bdrv_make_empty(bs);
2196 if (ret < 0) {
2197 goto ro_cleanup;
2199 bdrv_flush(bs);
2203 * Make sure all data we wrote to the backing device is actually
2204 * stable on disk.
2206 if (bs->backing_hd) {
2207 bdrv_flush(bs->backing_hd);
2210 ret = 0;
2211 ro_cleanup:
2212 g_free(buf);
2214 if (ro) {
2215 /* ignoring error return here */
2216 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2219 return ret;
2222 int bdrv_commit_all(void)
2224 BlockDriverState *bs;
2226 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2227 if (bs->drv && bs->backing_hd) {
2228 int ret = bdrv_commit(bs);
2229 if (ret < 0) {
2230 return ret;
2234 return 0;
2238 * Remove an active request from the tracked requests list
2240 * This function should be called when a tracked request is completing.
2242 static void tracked_request_end(BdrvTrackedRequest *req)
2244 if (req->serialising) {
2245 req->bs->serialising_in_flight--;
2248 QLIST_REMOVE(req, list);
2249 qemu_co_queue_restart_all(&req->wait_queue);
2253 * Add an active request to the tracked requests list
2255 static void tracked_request_begin(BdrvTrackedRequest *req,
2256 BlockDriverState *bs,
2257 int64_t offset,
2258 unsigned int bytes, bool is_write)
2260 *req = (BdrvTrackedRequest){
2261 .bs = bs,
2262 .offset = offset,
2263 .bytes = bytes,
2264 .is_write = is_write,
2265 .co = qemu_coroutine_self(),
2266 .serialising = false,
2267 .overlap_offset = offset,
2268 .overlap_bytes = bytes,
2271 qemu_co_queue_init(&req->wait_queue);
2273 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2276 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2278 int64_t overlap_offset = req->offset & ~(align - 1);
2279 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2280 - overlap_offset;
2282 if (!req->serialising) {
2283 req->bs->serialising_in_flight++;
2284 req->serialising = true;
2287 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2288 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2292 * Round a region to cluster boundaries
2294 void bdrv_round_to_clusters(BlockDriverState *bs,
2295 int64_t sector_num, int nb_sectors,
2296 int64_t *cluster_sector_num,
2297 int *cluster_nb_sectors)
2299 BlockDriverInfo bdi;
2301 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2302 *cluster_sector_num = sector_num;
2303 *cluster_nb_sectors = nb_sectors;
2304 } else {
2305 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2306 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2307 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2308 nb_sectors, c);
2312 static int bdrv_get_cluster_size(BlockDriverState *bs)
2314 BlockDriverInfo bdi;
2315 int ret;
2317 ret = bdrv_get_info(bs, &bdi);
2318 if (ret < 0 || bdi.cluster_size == 0) {
2319 return bs->request_alignment;
2320 } else {
2321 return bdi.cluster_size;
2325 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2326 int64_t offset, unsigned int bytes)
2328 /* aaaa bbbb */
2329 if (offset >= req->overlap_offset + req->overlap_bytes) {
2330 return false;
2332 /* bbbb aaaa */
2333 if (req->overlap_offset >= offset + bytes) {
2334 return false;
2336 return true;
2339 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2341 BlockDriverState *bs = self->bs;
2342 BdrvTrackedRequest *req;
2343 bool retry;
2344 bool waited = false;
2346 if (!bs->serialising_in_flight) {
2347 return false;
2350 do {
2351 retry = false;
2352 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2353 if (req == self || (!req->serialising && !self->serialising)) {
2354 continue;
2356 if (tracked_request_overlaps(req, self->overlap_offset,
2357 self->overlap_bytes))
2359 /* Hitting this means there was a reentrant request, for
2360 * example, a block driver issuing nested requests. This must
2361 * never happen since it means deadlock.
2363 assert(qemu_coroutine_self() != req->co);
2365 /* If the request is already (indirectly) waiting for us, or
2366 * will wait for us as soon as it wakes up, then just go on
2367 * (instead of producing a deadlock in the former case). */
2368 if (!req->waiting_for) {
2369 self->waiting_for = req;
2370 qemu_co_queue_wait(&req->wait_queue);
2371 self->waiting_for = NULL;
2372 retry = true;
2373 waited = true;
2374 break;
2378 } while (retry);
2380 return waited;
2384 * Return values:
2385 * 0 - success
2386 * -EINVAL - backing format specified, but no file
2387 * -ENOSPC - can't update the backing file because no space is left in the
2388 * image file header
2389 * -ENOTSUP - format driver doesn't support changing the backing file
2391 int bdrv_change_backing_file(BlockDriverState *bs,
2392 const char *backing_file, const char *backing_fmt)
2394 BlockDriver *drv = bs->drv;
2395 int ret;
2397 /* Backing file format doesn't make sense without a backing file */
2398 if (backing_fmt && !backing_file) {
2399 return -EINVAL;
2402 if (drv->bdrv_change_backing_file != NULL) {
2403 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2404 } else {
2405 ret = -ENOTSUP;
2408 if (ret == 0) {
2409 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2410 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2412 return ret;
2416 * Finds the image layer in the chain that has 'bs' as its backing file.
2418 * active is the current topmost image.
2420 * Returns NULL if bs is not found in active's image chain,
2421 * or if active == bs.
2423 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2424 BlockDriverState *bs)
2426 BlockDriverState *overlay = NULL;
2427 BlockDriverState *intermediate;
2429 assert(active != NULL);
2430 assert(bs != NULL);
2432 /* if bs is the same as active, then by definition it has no overlay
2434 if (active == bs) {
2435 return NULL;
2438 intermediate = active;
2439 while (intermediate->backing_hd) {
2440 if (intermediate->backing_hd == bs) {
2441 overlay = intermediate;
2442 break;
2444 intermediate = intermediate->backing_hd;
2447 return overlay;
2450 typedef struct BlkIntermediateStates {
2451 BlockDriverState *bs;
2452 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2453 } BlkIntermediateStates;
2457 * Drops images above 'base' up to and including 'top', and sets the image
2458 * above 'top' to have base as its backing file.
2460 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2461 * information in 'bs' can be properly updated.
2463 * E.g., this will convert the following chain:
2464 * bottom <- base <- intermediate <- top <- active
2466 * to
2468 * bottom <- base <- active
2470 * It is allowed for bottom==base, in which case it converts:
2472 * base <- intermediate <- top <- active
2474 * to
2476 * base <- active
2478 * Error conditions:
2479 * if active == top, that is considered an error
2482 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2483 BlockDriverState *base)
2485 BlockDriverState *intermediate;
2486 BlockDriverState *base_bs = NULL;
2487 BlockDriverState *new_top_bs = NULL;
2488 BlkIntermediateStates *intermediate_state, *next;
2489 int ret = -EIO;
2491 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2492 QSIMPLEQ_INIT(&states_to_delete);
2494 if (!top->drv || !base->drv) {
2495 goto exit;
2498 new_top_bs = bdrv_find_overlay(active, top);
2500 if (new_top_bs == NULL) {
2501 /* we could not find the image above 'top', this is an error */
2502 goto exit;
2505 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2506 * to do, no intermediate images */
2507 if (new_top_bs->backing_hd == base) {
2508 ret = 0;
2509 goto exit;
2512 intermediate = top;
2514 /* now we will go down through the list, and add each BDS we find
2515 * into our deletion queue, until we hit the 'base'
2517 while (intermediate) {
2518 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2519 intermediate_state->bs = intermediate;
2520 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2522 if (intermediate->backing_hd == base) {
2523 base_bs = intermediate->backing_hd;
2524 break;
2526 intermediate = intermediate->backing_hd;
2528 if (base_bs == NULL) {
2529 /* something went wrong, we did not end at the base. safely
2530 * unravel everything, and exit with error */
2531 goto exit;
2534 /* success - we can delete the intermediate states, and link top->base */
2535 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2536 base_bs->drv ? base_bs->drv->format_name : "");
2537 if (ret) {
2538 goto exit;
2540 new_top_bs->backing_hd = base_bs;
2542 bdrv_refresh_limits(new_top_bs);
2544 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2545 /* so that bdrv_close() does not recursively close the chain */
2546 intermediate_state->bs->backing_hd = NULL;
2547 bdrv_unref(intermediate_state->bs);
2549 ret = 0;
2551 exit:
2552 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2553 g_free(intermediate_state);
2555 return ret;
2559 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2560 size_t size)
2562 int64_t len;
2564 if (!bdrv_is_inserted(bs))
2565 return -ENOMEDIUM;
2567 if (bs->growable)
2568 return 0;
2570 len = bdrv_getlength(bs);
2572 if (offset < 0)
2573 return -EIO;
2575 if ((offset > len) || (len - offset < size))
2576 return -EIO;
2578 return 0;
2581 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2582 int nb_sectors)
2584 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2585 nb_sectors * BDRV_SECTOR_SIZE);
2588 typedef struct RwCo {
2589 BlockDriverState *bs;
2590 int64_t offset;
2591 QEMUIOVector *qiov;
2592 bool is_write;
2593 int ret;
2594 BdrvRequestFlags flags;
2595 } RwCo;
2597 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2599 RwCo *rwco = opaque;
2601 if (!rwco->is_write) {
2602 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2603 rwco->qiov->size, rwco->qiov,
2604 rwco->flags);
2605 } else {
2606 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2607 rwco->qiov->size, rwco->qiov,
2608 rwco->flags);
2613 * Process a vectored synchronous request using coroutines
2615 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2616 QEMUIOVector *qiov, bool is_write,
2617 BdrvRequestFlags flags)
2619 Coroutine *co;
2620 RwCo rwco = {
2621 .bs = bs,
2622 .offset = offset,
2623 .qiov = qiov,
2624 .is_write = is_write,
2625 .ret = NOT_DONE,
2626 .flags = flags,
2630 * In sync call context, when the vcpu is blocked, this throttling timer
2631 * will not fire; so the I/O throttling function has to be disabled here
2632 * if it has been enabled.
2634 if (bs->io_limits_enabled) {
2635 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2636 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2637 bdrv_io_limits_disable(bs);
2640 if (qemu_in_coroutine()) {
2641 /* Fast-path if already in coroutine context */
2642 bdrv_rw_co_entry(&rwco);
2643 } else {
2644 co = qemu_coroutine_create(bdrv_rw_co_entry);
2645 qemu_coroutine_enter(co, &rwco);
2646 while (rwco.ret == NOT_DONE) {
2647 qemu_aio_wait();
2650 return rwco.ret;
2654 * Process a synchronous request using coroutines
2656 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2657 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2659 QEMUIOVector qiov;
2660 struct iovec iov = {
2661 .iov_base = (void *)buf,
2662 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2665 qemu_iovec_init_external(&qiov, &iov, 1);
2666 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2667 &qiov, is_write, flags);
2670 /* return < 0 if error. See bdrv_write() for the return codes */
2671 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2672 uint8_t *buf, int nb_sectors)
2674 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2677 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2678 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2679 uint8_t *buf, int nb_sectors)
2681 bool enabled;
2682 int ret;
2684 enabled = bs->io_limits_enabled;
2685 bs->io_limits_enabled = false;
2686 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2687 bs->io_limits_enabled = enabled;
2688 return ret;
2691 /* Return < 0 if error. Important errors are:
2692 -EIO generic I/O error (may happen for all errors)
2693 -ENOMEDIUM No media inserted.
2694 -EINVAL Invalid sector number or nb_sectors
2695 -EACCES Trying to write a read-only device
2697 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2698 const uint8_t *buf, int nb_sectors)
2700 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2703 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2704 int nb_sectors, BdrvRequestFlags flags)
2706 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2707 BDRV_REQ_ZERO_WRITE | flags);
2711 * Completely zero out a block device with the help of bdrv_write_zeroes.
2712 * The operation is sped up by checking the block status and only writing
2713 * zeroes to the device if they currently do not return zeroes. Optional
2714 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2716 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2718 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2720 int64_t target_size = bdrv_getlength(bs) / BDRV_SECTOR_SIZE;
2721 int64_t ret, nb_sectors, sector_num = 0;
2722 int n;
2724 for (;;) {
2725 nb_sectors = target_size - sector_num;
2726 if (nb_sectors <= 0) {
2727 return 0;
2729 if (nb_sectors > INT_MAX) {
2730 nb_sectors = INT_MAX;
2732 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2733 if (ret < 0) {
2734 error_report("error getting block status at sector %" PRId64 ": %s",
2735 sector_num, strerror(-ret));
2736 return ret;
2738 if (ret & BDRV_BLOCK_ZERO) {
2739 sector_num += n;
2740 continue;
2742 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2743 if (ret < 0) {
2744 error_report("error writing zeroes at sector %" PRId64 ": %s",
2745 sector_num, strerror(-ret));
2746 return ret;
2748 sector_num += n;
2752 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2754 QEMUIOVector qiov;
2755 struct iovec iov = {
2756 .iov_base = (void *)buf,
2757 .iov_len = bytes,
2759 int ret;
2761 if (bytes < 0) {
2762 return -EINVAL;
2765 qemu_iovec_init_external(&qiov, &iov, 1);
2766 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2767 if (ret < 0) {
2768 return ret;
2771 return bytes;
2774 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2776 int ret;
2778 ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2779 if (ret < 0) {
2780 return ret;
2783 return qiov->size;
2786 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2787 const void *buf, int bytes)
2789 QEMUIOVector qiov;
2790 struct iovec iov = {
2791 .iov_base = (void *) buf,
2792 .iov_len = bytes,
2795 if (bytes < 0) {
2796 return -EINVAL;
2799 qemu_iovec_init_external(&qiov, &iov, 1);
2800 return bdrv_pwritev(bs, offset, &qiov);
2804 * Writes to the file and ensures that no writes are reordered across this
2805 * request (acts as a barrier)
2807 * Returns 0 on success, -errno in error cases.
2809 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2810 const void *buf, int count)
2812 int ret;
2814 ret = bdrv_pwrite(bs, offset, buf, count);
2815 if (ret < 0) {
2816 return ret;
2819 /* No flush needed for cache modes that already do it */
2820 if (bs->enable_write_cache) {
2821 bdrv_flush(bs);
2824 return 0;
2827 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2828 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2830 /* Perform I/O through a temporary buffer so that users who scribble over
2831 * their read buffer while the operation is in progress do not end up
2832 * modifying the image file. This is critical for zero-copy guest I/O
2833 * where anything might happen inside guest memory.
2835 void *bounce_buffer;
2837 BlockDriver *drv = bs->drv;
2838 struct iovec iov;
2839 QEMUIOVector bounce_qiov;
2840 int64_t cluster_sector_num;
2841 int cluster_nb_sectors;
2842 size_t skip_bytes;
2843 int ret;
2845 /* Cover entire cluster so no additional backing file I/O is required when
2846 * allocating cluster in the image file.
2848 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2849 &cluster_sector_num, &cluster_nb_sectors);
2851 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2852 cluster_sector_num, cluster_nb_sectors);
2854 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2855 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2856 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2858 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2859 &bounce_qiov);
2860 if (ret < 0) {
2861 goto err;
2864 if (drv->bdrv_co_write_zeroes &&
2865 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2866 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2867 cluster_nb_sectors, 0);
2868 } else {
2869 /* This does not change the data on the disk, it is not necessary
2870 * to flush even in cache=writethrough mode.
2872 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2873 &bounce_qiov);
2876 if (ret < 0) {
2877 /* It might be okay to ignore write errors for guest requests. If this
2878 * is a deliberate copy-on-read then we don't want to ignore the error.
2879 * Simply report it in all cases.
2881 goto err;
2884 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2885 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2886 nb_sectors * BDRV_SECTOR_SIZE);
2888 err:
2889 qemu_vfree(bounce_buffer);
2890 return ret;
2894 * Forwards an already correctly aligned request to the BlockDriver. This
2895 * handles copy on read and zeroing after EOF; any other features must be
2896 * implemented by the caller.
2898 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
2899 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
2900 int64_t align, QEMUIOVector *qiov, int flags)
2902 BlockDriver *drv = bs->drv;
2903 int ret;
2905 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
2906 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
2908 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
2909 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
2911 /* Handle Copy on Read and associated serialisation */
2912 if (flags & BDRV_REQ_COPY_ON_READ) {
2913 /* If we touch the same cluster it counts as an overlap. This
2914 * guarantees that allocating writes will be serialized and not race
2915 * with each other for the same cluster. For example, in copy-on-read
2916 * it ensures that the CoR read and write operations are atomic and
2917 * guest writes cannot interleave between them. */
2918 mark_request_serialising(req, bdrv_get_cluster_size(bs));
2921 wait_serialising_requests(req);
2923 if (flags & BDRV_REQ_COPY_ON_READ) {
2924 int pnum;
2926 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
2927 if (ret < 0) {
2928 goto out;
2931 if (!ret || pnum != nb_sectors) {
2932 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2933 goto out;
2937 /* Forward the request to the BlockDriver */
2938 if (!(bs->zero_beyond_eof && bs->growable)) {
2939 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2940 } else {
2941 /* Read zeros after EOF of growable BDSes */
2942 int64_t len, total_sectors, max_nb_sectors;
2944 len = bdrv_getlength(bs);
2945 if (len < 0) {
2946 ret = len;
2947 goto out;
2950 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
2951 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
2952 align >> BDRV_SECTOR_BITS);
2953 if (max_nb_sectors > 0) {
2954 ret = drv->bdrv_co_readv(bs, sector_num,
2955 MIN(nb_sectors, max_nb_sectors), qiov);
2956 } else {
2957 ret = 0;
2960 /* Reading beyond end of file is supposed to produce zeroes */
2961 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
2962 uint64_t offset = MAX(0, total_sectors - sector_num);
2963 uint64_t bytes = (sector_num + nb_sectors - offset) *
2964 BDRV_SECTOR_SIZE;
2965 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
2969 out:
2970 return ret;
2974 * Handle a read request in coroutine context
2976 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
2977 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
2978 BdrvRequestFlags flags)
2980 BlockDriver *drv = bs->drv;
2981 BdrvTrackedRequest req;
2983 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
2984 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
2985 uint8_t *head_buf = NULL;
2986 uint8_t *tail_buf = NULL;
2987 QEMUIOVector local_qiov;
2988 bool use_local_qiov = false;
2989 int ret;
2991 if (!drv) {
2992 return -ENOMEDIUM;
2994 if (bdrv_check_byte_request(bs, offset, bytes)) {
2995 return -EIO;
2998 if (bs->copy_on_read) {
2999 flags |= BDRV_REQ_COPY_ON_READ;
3002 /* throttling disk I/O */
3003 if (bs->io_limits_enabled) {
3004 bdrv_io_limits_intercept(bs, bytes, false);
3007 /* Align read if necessary by padding qiov */
3008 if (offset & (align - 1)) {
3009 head_buf = qemu_blockalign(bs, align);
3010 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3011 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3012 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3013 use_local_qiov = true;
3015 bytes += offset & (align - 1);
3016 offset = offset & ~(align - 1);
3019 if ((offset + bytes) & (align - 1)) {
3020 if (!use_local_qiov) {
3021 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3022 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3023 use_local_qiov = true;
3025 tail_buf = qemu_blockalign(bs, align);
3026 qemu_iovec_add(&local_qiov, tail_buf,
3027 align - ((offset + bytes) & (align - 1)));
3029 bytes = ROUND_UP(bytes, align);
3032 tracked_request_begin(&req, bs, offset, bytes, false);
3033 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3034 use_local_qiov ? &local_qiov : qiov,
3035 flags);
3036 tracked_request_end(&req);
3038 if (use_local_qiov) {
3039 qemu_iovec_destroy(&local_qiov);
3040 qemu_vfree(head_buf);
3041 qemu_vfree(tail_buf);
3044 return ret;
3047 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3048 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3049 BdrvRequestFlags flags)
3051 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3052 return -EINVAL;
3055 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3056 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3059 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3060 int nb_sectors, QEMUIOVector *qiov)
3062 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3064 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3067 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3068 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3070 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3072 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3073 BDRV_REQ_COPY_ON_READ);
3076 /* if no limit is specified in the BlockLimits use a default
3077 * of 32768 512-byte sectors (16 MiB) per request.
3079 #define MAX_WRITE_ZEROES_DEFAULT 32768
3081 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3082 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3084 BlockDriver *drv = bs->drv;
3085 QEMUIOVector qiov;
3086 struct iovec iov = {0};
3087 int ret = 0;
3089 int max_write_zeroes = bs->bl.max_write_zeroes ?
3090 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3092 while (nb_sectors > 0 && !ret) {
3093 int num = nb_sectors;
3095 /* Align request. Block drivers can expect the "bulk" of the request
3096 * to be aligned.
3098 if (bs->bl.write_zeroes_alignment
3099 && num > bs->bl.write_zeroes_alignment) {
3100 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3101 /* Make a small request up to the first aligned sector. */
3102 num = bs->bl.write_zeroes_alignment;
3103 num -= sector_num % bs->bl.write_zeroes_alignment;
3104 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3105 /* Shorten the request to the last aligned sector. num cannot
3106 * underflow because num > bs->bl.write_zeroes_alignment.
3108 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3112 /* limit request size */
3113 if (num > max_write_zeroes) {
3114 num = max_write_zeroes;
3117 ret = -ENOTSUP;
3118 /* First try the efficient write zeroes operation */
3119 if (drv->bdrv_co_write_zeroes) {
3120 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3123 if (ret == -ENOTSUP) {
3124 /* Fall back to bounce buffer if write zeroes is unsupported */
3125 iov.iov_len = num * BDRV_SECTOR_SIZE;
3126 if (iov.iov_base == NULL) {
3127 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3128 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3130 qemu_iovec_init_external(&qiov, &iov, 1);
3132 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3134 /* Keep bounce buffer around if it is big enough for all
3135 * all future requests.
3137 if (num < max_write_zeroes) {
3138 qemu_vfree(iov.iov_base);
3139 iov.iov_base = NULL;
3143 sector_num += num;
3144 nb_sectors -= num;
3147 qemu_vfree(iov.iov_base);
3148 return ret;
3152 * Forwards an already correctly aligned write request to the BlockDriver.
3154 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3155 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3156 QEMUIOVector *qiov, int flags)
3158 BlockDriver *drv = bs->drv;
3159 bool waited;
3160 int ret;
3162 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3163 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3165 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3166 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3168 waited = wait_serialising_requests(req);
3169 assert(!waited || !req->serialising);
3170 assert(req->overlap_offset <= offset);
3171 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3173 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3175 if (ret < 0) {
3176 /* Do nothing, write notifier decided to fail this request */
3177 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3178 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3179 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3180 } else {
3181 BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3182 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3184 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3186 if (ret == 0 && !bs->enable_write_cache) {
3187 ret = bdrv_co_flush(bs);
3190 bdrv_set_dirty(bs, sector_num, nb_sectors);
3192 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3193 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3195 if (bs->growable && ret >= 0) {
3196 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3199 return ret;
3203 * Handle a write request in coroutine context
3205 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3206 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3207 BdrvRequestFlags flags)
3209 BdrvTrackedRequest req;
3210 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3211 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3212 uint8_t *head_buf = NULL;
3213 uint8_t *tail_buf = NULL;
3214 QEMUIOVector local_qiov;
3215 bool use_local_qiov = false;
3216 int ret;
3218 if (!bs->drv) {
3219 return -ENOMEDIUM;
3221 if (bs->read_only) {
3222 return -EACCES;
3224 if (bdrv_check_byte_request(bs, offset, bytes)) {
3225 return -EIO;
3228 /* throttling disk I/O */
3229 if (bs->io_limits_enabled) {
3230 bdrv_io_limits_intercept(bs, bytes, true);
3234 * Align write if necessary by performing a read-modify-write cycle.
3235 * Pad qiov with the read parts and be sure to have a tracked request not
3236 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3238 tracked_request_begin(&req, bs, offset, bytes, true);
3240 if (offset & (align - 1)) {
3241 QEMUIOVector head_qiov;
3242 struct iovec head_iov;
3244 mark_request_serialising(&req, align);
3245 wait_serialising_requests(&req);
3247 head_buf = qemu_blockalign(bs, align);
3248 head_iov = (struct iovec) {
3249 .iov_base = head_buf,
3250 .iov_len = align,
3252 qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3254 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3255 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3256 align, &head_qiov, 0);
3257 if (ret < 0) {
3258 goto fail;
3260 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3262 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3263 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3264 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3265 use_local_qiov = true;
3267 bytes += offset & (align - 1);
3268 offset = offset & ~(align - 1);
3271 if ((offset + bytes) & (align - 1)) {
3272 QEMUIOVector tail_qiov;
3273 struct iovec tail_iov;
3274 size_t tail_bytes;
3275 bool waited;
3277 mark_request_serialising(&req, align);
3278 waited = wait_serialising_requests(&req);
3279 assert(!waited || !use_local_qiov);
3281 tail_buf = qemu_blockalign(bs, align);
3282 tail_iov = (struct iovec) {
3283 .iov_base = tail_buf,
3284 .iov_len = align,
3286 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3288 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3289 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3290 align, &tail_qiov, 0);
3291 if (ret < 0) {
3292 goto fail;
3294 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3296 if (!use_local_qiov) {
3297 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3298 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3299 use_local_qiov = true;
3302 tail_bytes = (offset + bytes) & (align - 1);
3303 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3305 bytes = ROUND_UP(bytes, align);
3308 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3309 use_local_qiov ? &local_qiov : qiov,
3310 flags);
3312 fail:
3313 tracked_request_end(&req);
3315 if (use_local_qiov) {
3316 qemu_iovec_destroy(&local_qiov);
3318 qemu_vfree(head_buf);
3319 qemu_vfree(tail_buf);
3321 return ret;
3324 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3325 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3326 BdrvRequestFlags flags)
3328 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3329 return -EINVAL;
3332 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3333 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3336 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3337 int nb_sectors, QEMUIOVector *qiov)
3339 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3341 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3344 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3345 int64_t sector_num, int nb_sectors,
3346 BdrvRequestFlags flags)
3348 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3350 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3351 flags &= ~BDRV_REQ_MAY_UNMAP;
3354 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3355 BDRV_REQ_ZERO_WRITE | flags);
3359 * Truncate file to 'offset' bytes (needed only for file protocols)
3361 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3363 BlockDriver *drv = bs->drv;
3364 int ret;
3365 if (!drv)
3366 return -ENOMEDIUM;
3367 if (!drv->bdrv_truncate)
3368 return -ENOTSUP;
3369 if (bs->read_only)
3370 return -EACCES;
3371 if (bdrv_in_use(bs))
3372 return -EBUSY;
3373 ret = drv->bdrv_truncate(bs, offset);
3374 if (ret == 0) {
3375 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3376 bdrv_dev_resize_cb(bs);
3378 return ret;
3382 * Length of a allocated file in bytes. Sparse files are counted by actual
3383 * allocated space. Return < 0 if error or unknown.
3385 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3387 BlockDriver *drv = bs->drv;
3388 if (!drv) {
3389 return -ENOMEDIUM;
3391 if (drv->bdrv_get_allocated_file_size) {
3392 return drv->bdrv_get_allocated_file_size(bs);
3394 if (bs->file) {
3395 return bdrv_get_allocated_file_size(bs->file);
3397 return -ENOTSUP;
3401 * Length of a file in bytes. Return < 0 if error or unknown.
3403 int64_t bdrv_getlength(BlockDriverState *bs)
3405 BlockDriver *drv = bs->drv;
3406 if (!drv)
3407 return -ENOMEDIUM;
3409 if (drv->has_variable_length) {
3410 int ret = refresh_total_sectors(bs, bs->total_sectors);
3411 if (ret < 0) {
3412 return ret;
3415 return bs->total_sectors * BDRV_SECTOR_SIZE;
3418 /* return 0 as number of sectors if no device present or error */
3419 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3421 int64_t length;
3422 length = bdrv_getlength(bs);
3423 if (length < 0)
3424 length = 0;
3425 else
3426 length = length >> BDRV_SECTOR_BITS;
3427 *nb_sectors_ptr = length;
3430 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3431 BlockdevOnError on_write_error)
3433 bs->on_read_error = on_read_error;
3434 bs->on_write_error = on_write_error;
3437 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3439 return is_read ? bs->on_read_error : bs->on_write_error;
3442 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3444 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3446 switch (on_err) {
3447 case BLOCKDEV_ON_ERROR_ENOSPC:
3448 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
3449 case BLOCKDEV_ON_ERROR_STOP:
3450 return BDRV_ACTION_STOP;
3451 case BLOCKDEV_ON_ERROR_REPORT:
3452 return BDRV_ACTION_REPORT;
3453 case BLOCKDEV_ON_ERROR_IGNORE:
3454 return BDRV_ACTION_IGNORE;
3455 default:
3456 abort();
3460 /* This is done by device models because, while the block layer knows
3461 * about the error, it does not know whether an operation comes from
3462 * the device or the block layer (from a job, for example).
3464 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3465 bool is_read, int error)
3467 assert(error >= 0);
3468 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
3469 if (action == BDRV_ACTION_STOP) {
3470 vm_stop(RUN_STATE_IO_ERROR);
3471 bdrv_iostatus_set_err(bs, error);
3475 int bdrv_is_read_only(BlockDriverState *bs)
3477 return bs->read_only;
3480 int bdrv_is_sg(BlockDriverState *bs)
3482 return bs->sg;
3485 int bdrv_enable_write_cache(BlockDriverState *bs)
3487 return bs->enable_write_cache;
3490 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3492 bs->enable_write_cache = wce;
3494 /* so a reopen() will preserve wce */
3495 if (wce) {
3496 bs->open_flags |= BDRV_O_CACHE_WB;
3497 } else {
3498 bs->open_flags &= ~BDRV_O_CACHE_WB;
3502 int bdrv_is_encrypted(BlockDriverState *bs)
3504 if (bs->backing_hd && bs->backing_hd->encrypted)
3505 return 1;
3506 return bs->encrypted;
3509 int bdrv_key_required(BlockDriverState *bs)
3511 BlockDriverState *backing_hd = bs->backing_hd;
3513 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3514 return 1;
3515 return (bs->encrypted && !bs->valid_key);
3518 int bdrv_set_key(BlockDriverState *bs, const char *key)
3520 int ret;
3521 if (bs->backing_hd && bs->backing_hd->encrypted) {
3522 ret = bdrv_set_key(bs->backing_hd, key);
3523 if (ret < 0)
3524 return ret;
3525 if (!bs->encrypted)
3526 return 0;
3528 if (!bs->encrypted) {
3529 return -EINVAL;
3530 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3531 return -ENOMEDIUM;
3533 ret = bs->drv->bdrv_set_key(bs, key);
3534 if (ret < 0) {
3535 bs->valid_key = 0;
3536 } else if (!bs->valid_key) {
3537 bs->valid_key = 1;
3538 /* call the change callback now, we skipped it on open */
3539 bdrv_dev_change_media_cb(bs, true);
3541 return ret;
3544 const char *bdrv_get_format_name(BlockDriverState *bs)
3546 return bs->drv ? bs->drv->format_name : NULL;
3549 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3550 void *opaque)
3552 BlockDriver *drv;
3554 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3555 it(opaque, drv->format_name);
3559 /* This function is to find block backend bs */
3560 BlockDriverState *bdrv_find(const char *name)
3562 BlockDriverState *bs;
3564 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3565 if (!strcmp(name, bs->device_name)) {
3566 return bs;
3569 return NULL;
3572 /* This function is to find a node in the bs graph */
3573 BlockDriverState *bdrv_find_node(const char *node_name)
3575 BlockDriverState *bs;
3577 assert(node_name);
3579 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3580 if (!strcmp(node_name, bs->node_name)) {
3581 return bs;
3584 return NULL;
3587 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3588 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3590 BlockDeviceInfoList *list, *entry;
3591 BlockDriverState *bs;
3593 list = NULL;
3594 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3595 entry = g_malloc0(sizeof(*entry));
3596 entry->value = bdrv_block_device_info(bs);
3597 entry->next = list;
3598 list = entry;
3601 return list;
3604 BlockDriverState *bdrv_lookup_bs(const char *device,
3605 const char *node_name,
3606 Error **errp)
3608 BlockDriverState *bs = NULL;
3610 if (device) {
3611 bs = bdrv_find(device);
3613 if (bs) {
3614 return bs;
3618 if (node_name) {
3619 bs = bdrv_find_node(node_name);
3621 if (bs) {
3622 return bs;
3626 error_setg(errp, "Cannot find device=%s nor node_name=%s",
3627 device ? device : "",
3628 node_name ? node_name : "");
3629 return NULL;
3632 BlockDriverState *bdrv_next(BlockDriverState *bs)
3634 if (!bs) {
3635 return QTAILQ_FIRST(&bdrv_states);
3637 return QTAILQ_NEXT(bs, device_list);
3640 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3642 BlockDriverState *bs;
3644 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3645 it(opaque, bs);
3649 const char *bdrv_get_device_name(BlockDriverState *bs)
3651 return bs->device_name;
3654 int bdrv_get_flags(BlockDriverState *bs)
3656 return bs->open_flags;
3659 int bdrv_flush_all(void)
3661 BlockDriverState *bs;
3662 int result = 0;
3664 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3665 int ret = bdrv_flush(bs);
3666 if (ret < 0 && !result) {
3667 result = ret;
3671 return result;
3674 int bdrv_has_zero_init_1(BlockDriverState *bs)
3676 return 1;
3679 int bdrv_has_zero_init(BlockDriverState *bs)
3681 assert(bs->drv);
3683 /* If BS is a copy on write image, it is initialized to
3684 the contents of the base image, which may not be zeroes. */
3685 if (bs->backing_hd) {
3686 return 0;
3688 if (bs->drv->bdrv_has_zero_init) {
3689 return bs->drv->bdrv_has_zero_init(bs);
3692 /* safe default */
3693 return 0;
3696 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3698 BlockDriverInfo bdi;
3700 if (bs->backing_hd) {
3701 return false;
3704 if (bdrv_get_info(bs, &bdi) == 0) {
3705 return bdi.unallocated_blocks_are_zero;
3708 return false;
3711 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3713 BlockDriverInfo bdi;
3715 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3716 return false;
3719 if (bdrv_get_info(bs, &bdi) == 0) {
3720 return bdi.can_write_zeroes_with_unmap;
3723 return false;
3726 typedef struct BdrvCoGetBlockStatusData {
3727 BlockDriverState *bs;
3728 BlockDriverState *base;
3729 int64_t sector_num;
3730 int nb_sectors;
3731 int *pnum;
3732 int64_t ret;
3733 bool done;
3734 } BdrvCoGetBlockStatusData;
3737 * Returns true iff the specified sector is present in the disk image. Drivers
3738 * not implementing the functionality are assumed to not support backing files,
3739 * hence all their sectors are reported as allocated.
3741 * If 'sector_num' is beyond the end of the disk image the return value is 0
3742 * and 'pnum' is set to 0.
3744 * 'pnum' is set to the number of sectors (including and immediately following
3745 * the specified sector) that are known to be in the same
3746 * allocated/unallocated state.
3748 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3749 * beyond the end of the disk image it will be clamped.
3751 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3752 int64_t sector_num,
3753 int nb_sectors, int *pnum)
3755 int64_t length;
3756 int64_t n;
3757 int64_t ret, ret2;
3759 length = bdrv_getlength(bs);
3760 if (length < 0) {
3761 return length;
3764 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3765 *pnum = 0;
3766 return 0;
3769 n = bs->total_sectors - sector_num;
3770 if (n < nb_sectors) {
3771 nb_sectors = n;
3774 if (!bs->drv->bdrv_co_get_block_status) {
3775 *pnum = nb_sectors;
3776 ret = BDRV_BLOCK_DATA;
3777 if (bs->drv->protocol_name) {
3778 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3780 return ret;
3783 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3784 if (ret < 0) {
3785 *pnum = 0;
3786 return ret;
3789 if (ret & BDRV_BLOCK_RAW) {
3790 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3791 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3792 *pnum, pnum);
3795 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3796 if (bdrv_unallocated_blocks_are_zero(bs)) {
3797 ret |= BDRV_BLOCK_ZERO;
3798 } else if (bs->backing_hd) {
3799 BlockDriverState *bs2 = bs->backing_hd;
3800 int64_t length2 = bdrv_getlength(bs2);
3801 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3802 ret |= BDRV_BLOCK_ZERO;
3807 if (bs->file &&
3808 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3809 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3810 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3811 *pnum, pnum);
3812 if (ret2 >= 0) {
3813 /* Ignore errors. This is just providing extra information, it
3814 * is useful but not necessary.
3816 ret |= (ret2 & BDRV_BLOCK_ZERO);
3820 return ret;
3823 /* Coroutine wrapper for bdrv_get_block_status() */
3824 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3826 BdrvCoGetBlockStatusData *data = opaque;
3827 BlockDriverState *bs = data->bs;
3829 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3830 data->pnum);
3831 data->done = true;
3835 * Synchronous wrapper around bdrv_co_get_block_status().
3837 * See bdrv_co_get_block_status() for details.
3839 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
3840 int nb_sectors, int *pnum)
3842 Coroutine *co;
3843 BdrvCoGetBlockStatusData data = {
3844 .bs = bs,
3845 .sector_num = sector_num,
3846 .nb_sectors = nb_sectors,
3847 .pnum = pnum,
3848 .done = false,
3851 if (qemu_in_coroutine()) {
3852 /* Fast-path if already in coroutine context */
3853 bdrv_get_block_status_co_entry(&data);
3854 } else {
3855 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
3856 qemu_coroutine_enter(co, &data);
3857 while (!data.done) {
3858 qemu_aio_wait();
3861 return data.ret;
3864 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
3865 int nb_sectors, int *pnum)
3867 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
3868 if (ret < 0) {
3869 return ret;
3871 return
3872 (ret & BDRV_BLOCK_DATA) ||
3873 ((ret & BDRV_BLOCK_ZERO) && !bdrv_has_zero_init(bs));
3877 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3879 * Return true if the given sector is allocated in any image between
3880 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3881 * sector is allocated in any image of the chain. Return false otherwise.
3883 * 'pnum' is set to the number of sectors (including and immediately following
3884 * the specified sector) that are known to be in the same
3885 * allocated/unallocated state.
3888 int bdrv_is_allocated_above(BlockDriverState *top,
3889 BlockDriverState *base,
3890 int64_t sector_num,
3891 int nb_sectors, int *pnum)
3893 BlockDriverState *intermediate;
3894 int ret, n = nb_sectors;
3896 intermediate = top;
3897 while (intermediate && intermediate != base) {
3898 int pnum_inter;
3899 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
3900 &pnum_inter);
3901 if (ret < 0) {
3902 return ret;
3903 } else if (ret) {
3904 *pnum = pnum_inter;
3905 return 1;
3909 * [sector_num, nb_sectors] is unallocated on top but intermediate
3910 * might have
3912 * [sector_num+x, nr_sectors] allocated.
3914 if (n > pnum_inter &&
3915 (intermediate == top ||
3916 sector_num + pnum_inter < intermediate->total_sectors)) {
3917 n = pnum_inter;
3920 intermediate = intermediate->backing_hd;
3923 *pnum = n;
3924 return 0;
3927 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3929 if (bs->backing_hd && bs->backing_hd->encrypted)
3930 return bs->backing_file;
3931 else if (bs->encrypted)
3932 return bs->filename;
3933 else
3934 return NULL;
3937 void bdrv_get_backing_filename(BlockDriverState *bs,
3938 char *filename, int filename_size)
3940 pstrcpy(filename, filename_size, bs->backing_file);
3943 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3944 const uint8_t *buf, int nb_sectors)
3946 BlockDriver *drv = bs->drv;
3947 if (!drv)
3948 return -ENOMEDIUM;
3949 if (!drv->bdrv_write_compressed)
3950 return -ENOTSUP;
3951 if (bdrv_check_request(bs, sector_num, nb_sectors))
3952 return -EIO;
3954 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
3956 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3959 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3961 BlockDriver *drv = bs->drv;
3962 if (!drv)
3963 return -ENOMEDIUM;
3964 if (!drv->bdrv_get_info)
3965 return -ENOTSUP;
3966 memset(bdi, 0, sizeof(*bdi));
3967 return drv->bdrv_get_info(bs, bdi);
3970 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
3972 BlockDriver *drv = bs->drv;
3973 if (drv && drv->bdrv_get_specific_info) {
3974 return drv->bdrv_get_specific_info(bs);
3976 return NULL;
3979 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
3980 int64_t pos, int size)
3982 QEMUIOVector qiov;
3983 struct iovec iov = {
3984 .iov_base = (void *) buf,
3985 .iov_len = size,
3988 qemu_iovec_init_external(&qiov, &iov, 1);
3989 return bdrv_writev_vmstate(bs, &qiov, pos);
3992 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
3994 BlockDriver *drv = bs->drv;
3996 if (!drv) {
3997 return -ENOMEDIUM;
3998 } else if (drv->bdrv_save_vmstate) {
3999 return drv->bdrv_save_vmstate(bs, qiov, pos);
4000 } else if (bs->file) {
4001 return bdrv_writev_vmstate(bs->file, qiov, pos);
4004 return -ENOTSUP;
4007 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4008 int64_t pos, int size)
4010 BlockDriver *drv = bs->drv;
4011 if (!drv)
4012 return -ENOMEDIUM;
4013 if (drv->bdrv_load_vmstate)
4014 return drv->bdrv_load_vmstate(bs, buf, pos, size);
4015 if (bs->file)
4016 return bdrv_load_vmstate(bs->file, buf, pos, size);
4017 return -ENOTSUP;
4020 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4022 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4023 return;
4026 bs->drv->bdrv_debug_event(bs, event);
4029 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4030 const char *tag)
4032 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4033 bs = bs->file;
4036 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4037 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4040 return -ENOTSUP;
4043 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4045 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4046 bs = bs->file;
4049 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4050 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4053 return -ENOTSUP;
4056 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4058 while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
4059 bs = bs->file;
4062 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4063 return bs->drv->bdrv_debug_resume(bs, tag);
4066 return -ENOTSUP;
4069 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4071 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4072 bs = bs->file;
4075 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4076 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4079 return false;
4082 int bdrv_is_snapshot(BlockDriverState *bs)
4084 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4087 /* backing_file can either be relative, or absolute, or a protocol. If it is
4088 * relative, it must be relative to the chain. So, passing in bs->filename
4089 * from a BDS as backing_file should not be done, as that may be relative to
4090 * the CWD rather than the chain. */
4091 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4092 const char *backing_file)
4094 char *filename_full = NULL;
4095 char *backing_file_full = NULL;
4096 char *filename_tmp = NULL;
4097 int is_protocol = 0;
4098 BlockDriverState *curr_bs = NULL;
4099 BlockDriverState *retval = NULL;
4101 if (!bs || !bs->drv || !backing_file) {
4102 return NULL;
4105 filename_full = g_malloc(PATH_MAX);
4106 backing_file_full = g_malloc(PATH_MAX);
4107 filename_tmp = g_malloc(PATH_MAX);
4109 is_protocol = path_has_protocol(backing_file);
4111 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4113 /* If either of the filename paths is actually a protocol, then
4114 * compare unmodified paths; otherwise make paths relative */
4115 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4116 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4117 retval = curr_bs->backing_hd;
4118 break;
4120 } else {
4121 /* If not an absolute filename path, make it relative to the current
4122 * image's filename path */
4123 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4124 backing_file);
4126 /* We are going to compare absolute pathnames */
4127 if (!realpath(filename_tmp, filename_full)) {
4128 continue;
4131 /* We need to make sure the backing filename we are comparing against
4132 * is relative to the current image filename (or absolute) */
4133 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4134 curr_bs->backing_file);
4136 if (!realpath(filename_tmp, backing_file_full)) {
4137 continue;
4140 if (strcmp(backing_file_full, filename_full) == 0) {
4141 retval = curr_bs->backing_hd;
4142 break;
4147 g_free(filename_full);
4148 g_free(backing_file_full);
4149 g_free(filename_tmp);
4150 return retval;
4153 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4155 if (!bs->drv) {
4156 return 0;
4159 if (!bs->backing_hd) {
4160 return 0;
4163 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4166 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
4168 BlockDriverState *curr_bs = NULL;
4170 if (!bs) {
4171 return NULL;
4174 curr_bs = bs;
4176 while (curr_bs->backing_hd) {
4177 curr_bs = curr_bs->backing_hd;
4179 return curr_bs;
4182 /**************************************************************/
4183 /* async I/Os */
4185 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4186 QEMUIOVector *qiov, int nb_sectors,
4187 BlockDriverCompletionFunc *cb, void *opaque)
4189 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4191 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4192 cb, opaque, false);
4195 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4196 QEMUIOVector *qiov, int nb_sectors,
4197 BlockDriverCompletionFunc *cb, void *opaque)
4199 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4201 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4202 cb, opaque, true);
4205 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4206 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4207 BlockDriverCompletionFunc *cb, void *opaque)
4209 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4211 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4212 BDRV_REQ_ZERO_WRITE | flags,
4213 cb, opaque, true);
4217 typedef struct MultiwriteCB {
4218 int error;
4219 int num_requests;
4220 int num_callbacks;
4221 struct {
4222 BlockDriverCompletionFunc *cb;
4223 void *opaque;
4224 QEMUIOVector *free_qiov;
4225 } callbacks[];
4226 } MultiwriteCB;
4228 static void multiwrite_user_cb(MultiwriteCB *mcb)
4230 int i;
4232 for (i = 0; i < mcb->num_callbacks; i++) {
4233 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4234 if (mcb->callbacks[i].free_qiov) {
4235 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4237 g_free(mcb->callbacks[i].free_qiov);
4241 static void multiwrite_cb(void *opaque, int ret)
4243 MultiwriteCB *mcb = opaque;
4245 trace_multiwrite_cb(mcb, ret);
4247 if (ret < 0 && !mcb->error) {
4248 mcb->error = ret;
4251 mcb->num_requests--;
4252 if (mcb->num_requests == 0) {
4253 multiwrite_user_cb(mcb);
4254 g_free(mcb);
4258 static int multiwrite_req_compare(const void *a, const void *b)
4260 const BlockRequest *req1 = a, *req2 = b;
4263 * Note that we can't simply subtract req2->sector from req1->sector
4264 * here as that could overflow the return value.
4266 if (req1->sector > req2->sector) {
4267 return 1;
4268 } else if (req1->sector < req2->sector) {
4269 return -1;
4270 } else {
4271 return 0;
4276 * Takes a bunch of requests and tries to merge them. Returns the number of
4277 * requests that remain after merging.
4279 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4280 int num_reqs, MultiwriteCB *mcb)
4282 int i, outidx;
4284 // Sort requests by start sector
4285 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4287 // Check if adjacent requests touch the same clusters. If so, combine them,
4288 // filling up gaps with zero sectors.
4289 outidx = 0;
4290 for (i = 1; i < num_reqs; i++) {
4291 int merge = 0;
4292 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4294 // Handle exactly sequential writes and overlapping writes.
4295 if (reqs[i].sector <= oldreq_last) {
4296 merge = 1;
4299 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4300 merge = 0;
4303 if (merge) {
4304 size_t size;
4305 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4306 qemu_iovec_init(qiov,
4307 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4309 // Add the first request to the merged one. If the requests are
4310 // overlapping, drop the last sectors of the first request.
4311 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4312 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4314 // We should need to add any zeros between the two requests
4315 assert (reqs[i].sector <= oldreq_last);
4317 // Add the second request
4318 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4320 reqs[outidx].nb_sectors = qiov->size >> 9;
4321 reqs[outidx].qiov = qiov;
4323 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4324 } else {
4325 outidx++;
4326 reqs[outidx].sector = reqs[i].sector;
4327 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4328 reqs[outidx].qiov = reqs[i].qiov;
4332 return outidx + 1;
4336 * Submit multiple AIO write requests at once.
4338 * On success, the function returns 0 and all requests in the reqs array have
4339 * been submitted. In error case this function returns -1, and any of the
4340 * requests may or may not be submitted yet. In particular, this means that the
4341 * callback will be called for some of the requests, for others it won't. The
4342 * caller must check the error field of the BlockRequest to wait for the right
4343 * callbacks (if error != 0, no callback will be called).
4345 * The implementation may modify the contents of the reqs array, e.g. to merge
4346 * requests. However, the fields opaque and error are left unmodified as they
4347 * are used to signal failure for a single request to the caller.
4349 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4351 MultiwriteCB *mcb;
4352 int i;
4354 /* don't submit writes if we don't have a medium */
4355 if (bs->drv == NULL) {
4356 for (i = 0; i < num_reqs; i++) {
4357 reqs[i].error = -ENOMEDIUM;
4359 return -1;
4362 if (num_reqs == 0) {
4363 return 0;
4366 // Create MultiwriteCB structure
4367 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4368 mcb->num_requests = 0;
4369 mcb->num_callbacks = num_reqs;
4371 for (i = 0; i < num_reqs; i++) {
4372 mcb->callbacks[i].cb = reqs[i].cb;
4373 mcb->callbacks[i].opaque = reqs[i].opaque;
4376 // Check for mergable requests
4377 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4379 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4381 /* Run the aio requests. */
4382 mcb->num_requests = num_reqs;
4383 for (i = 0; i < num_reqs; i++) {
4384 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4385 reqs[i].nb_sectors, reqs[i].flags,
4386 multiwrite_cb, mcb,
4387 true);
4390 return 0;
4393 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4395 acb->aiocb_info->cancel(acb);
4398 /**************************************************************/
4399 /* async block device emulation */
4401 typedef struct BlockDriverAIOCBSync {
4402 BlockDriverAIOCB common;
4403 QEMUBH *bh;
4404 int ret;
4405 /* vector translation state */
4406 QEMUIOVector *qiov;
4407 uint8_t *bounce;
4408 int is_write;
4409 } BlockDriverAIOCBSync;
4411 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4413 BlockDriverAIOCBSync *acb =
4414 container_of(blockacb, BlockDriverAIOCBSync, common);
4415 qemu_bh_delete(acb->bh);
4416 acb->bh = NULL;
4417 qemu_aio_release(acb);
4420 static const AIOCBInfo bdrv_em_aiocb_info = {
4421 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4422 .cancel = bdrv_aio_cancel_em,
4425 static void bdrv_aio_bh_cb(void *opaque)
4427 BlockDriverAIOCBSync *acb = opaque;
4429 if (!acb->is_write)
4430 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4431 qemu_vfree(acb->bounce);
4432 acb->common.cb(acb->common.opaque, acb->ret);
4433 qemu_bh_delete(acb->bh);
4434 acb->bh = NULL;
4435 qemu_aio_release(acb);
4438 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4439 int64_t sector_num,
4440 QEMUIOVector *qiov,
4441 int nb_sectors,
4442 BlockDriverCompletionFunc *cb,
4443 void *opaque,
4444 int is_write)
4447 BlockDriverAIOCBSync *acb;
4449 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4450 acb->is_write = is_write;
4451 acb->qiov = qiov;
4452 acb->bounce = qemu_blockalign(bs, qiov->size);
4453 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
4455 if (is_write) {
4456 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4457 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4458 } else {
4459 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4462 qemu_bh_schedule(acb->bh);
4464 return &acb->common;
4467 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4468 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4469 BlockDriverCompletionFunc *cb, void *opaque)
4471 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4474 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4475 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4476 BlockDriverCompletionFunc *cb, void *opaque)
4478 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4482 typedef struct BlockDriverAIOCBCoroutine {
4483 BlockDriverAIOCB common;
4484 BlockRequest req;
4485 bool is_write;
4486 bool *done;
4487 QEMUBH* bh;
4488 } BlockDriverAIOCBCoroutine;
4490 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4492 BlockDriverAIOCBCoroutine *acb =
4493 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4494 bool done = false;
4496 acb->done = &done;
4497 while (!done) {
4498 qemu_aio_wait();
4502 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4503 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4504 .cancel = bdrv_aio_co_cancel_em,
4507 static void bdrv_co_em_bh(void *opaque)
4509 BlockDriverAIOCBCoroutine *acb = opaque;
4511 acb->common.cb(acb->common.opaque, acb->req.error);
4513 if (acb->done) {
4514 *acb->done = true;
4517 qemu_bh_delete(acb->bh);
4518 qemu_aio_release(acb);
4521 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4522 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4524 BlockDriverAIOCBCoroutine *acb = opaque;
4525 BlockDriverState *bs = acb->common.bs;
4527 if (!acb->is_write) {
4528 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4529 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4530 } else {
4531 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4532 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4535 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4536 qemu_bh_schedule(acb->bh);
4539 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4540 int64_t sector_num,
4541 QEMUIOVector *qiov,
4542 int nb_sectors,
4543 BdrvRequestFlags flags,
4544 BlockDriverCompletionFunc *cb,
4545 void *opaque,
4546 bool is_write)
4548 Coroutine *co;
4549 BlockDriverAIOCBCoroutine *acb;
4551 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4552 acb->req.sector = sector_num;
4553 acb->req.nb_sectors = nb_sectors;
4554 acb->req.qiov = qiov;
4555 acb->req.flags = flags;
4556 acb->is_write = is_write;
4557 acb->done = NULL;
4559 co = qemu_coroutine_create(bdrv_co_do_rw);
4560 qemu_coroutine_enter(co, acb);
4562 return &acb->common;
4565 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4567 BlockDriverAIOCBCoroutine *acb = opaque;
4568 BlockDriverState *bs = acb->common.bs;
4570 acb->req.error = bdrv_co_flush(bs);
4571 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4572 qemu_bh_schedule(acb->bh);
4575 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4576 BlockDriverCompletionFunc *cb, void *opaque)
4578 trace_bdrv_aio_flush(bs, opaque);
4580 Coroutine *co;
4581 BlockDriverAIOCBCoroutine *acb;
4583 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4584 acb->done = NULL;
4586 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4587 qemu_coroutine_enter(co, acb);
4589 return &acb->common;
4592 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4594 BlockDriverAIOCBCoroutine *acb = opaque;
4595 BlockDriverState *bs = acb->common.bs;
4597 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4598 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4599 qemu_bh_schedule(acb->bh);
4602 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4603 int64_t sector_num, int nb_sectors,
4604 BlockDriverCompletionFunc *cb, void *opaque)
4606 Coroutine *co;
4607 BlockDriverAIOCBCoroutine *acb;
4609 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4611 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4612 acb->req.sector = sector_num;
4613 acb->req.nb_sectors = nb_sectors;
4614 acb->done = NULL;
4615 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4616 qemu_coroutine_enter(co, acb);
4618 return &acb->common;
4621 void bdrv_init(void)
4623 module_call_init(MODULE_INIT_BLOCK);
4626 void bdrv_init_with_whitelist(void)
4628 use_bdrv_whitelist = 1;
4629 bdrv_init();
4632 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4633 BlockDriverCompletionFunc *cb, void *opaque)
4635 BlockDriverAIOCB *acb;
4637 acb = g_slice_alloc(aiocb_info->aiocb_size);
4638 acb->aiocb_info = aiocb_info;
4639 acb->bs = bs;
4640 acb->cb = cb;
4641 acb->opaque = opaque;
4642 return acb;
4645 void qemu_aio_release(void *p)
4647 BlockDriverAIOCB *acb = p;
4648 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4651 /**************************************************************/
4652 /* Coroutine block device emulation */
4654 typedef struct CoroutineIOCompletion {
4655 Coroutine *coroutine;
4656 int ret;
4657 } CoroutineIOCompletion;
4659 static void bdrv_co_io_em_complete(void *opaque, int ret)
4661 CoroutineIOCompletion *co = opaque;
4663 co->ret = ret;
4664 qemu_coroutine_enter(co->coroutine, NULL);
4667 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4668 int nb_sectors, QEMUIOVector *iov,
4669 bool is_write)
4671 CoroutineIOCompletion co = {
4672 .coroutine = qemu_coroutine_self(),
4674 BlockDriverAIOCB *acb;
4676 if (is_write) {
4677 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4678 bdrv_co_io_em_complete, &co);
4679 } else {
4680 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4681 bdrv_co_io_em_complete, &co);
4684 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4685 if (!acb) {
4686 return -EIO;
4688 qemu_coroutine_yield();
4690 return co.ret;
4693 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4694 int64_t sector_num, int nb_sectors,
4695 QEMUIOVector *iov)
4697 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4700 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4701 int64_t sector_num, int nb_sectors,
4702 QEMUIOVector *iov)
4704 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4707 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4709 RwCo *rwco = opaque;
4711 rwco->ret = bdrv_co_flush(rwco->bs);
4714 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4716 int ret;
4718 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4719 return 0;
4722 /* Write back cached data to the OS even with cache=unsafe */
4723 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4724 if (bs->drv->bdrv_co_flush_to_os) {
4725 ret = bs->drv->bdrv_co_flush_to_os(bs);
4726 if (ret < 0) {
4727 return ret;
4731 /* But don't actually force it to the disk with cache=unsafe */
4732 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4733 goto flush_parent;
4736 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4737 if (bs->drv->bdrv_co_flush_to_disk) {
4738 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4739 } else if (bs->drv->bdrv_aio_flush) {
4740 BlockDriverAIOCB *acb;
4741 CoroutineIOCompletion co = {
4742 .coroutine = qemu_coroutine_self(),
4745 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4746 if (acb == NULL) {
4747 ret = -EIO;
4748 } else {
4749 qemu_coroutine_yield();
4750 ret = co.ret;
4752 } else {
4754 * Some block drivers always operate in either writethrough or unsafe
4755 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4756 * know how the server works (because the behaviour is hardcoded or
4757 * depends on server-side configuration), so we can't ensure that
4758 * everything is safe on disk. Returning an error doesn't work because
4759 * that would break guests even if the server operates in writethrough
4760 * mode.
4762 * Let's hope the user knows what he's doing.
4764 ret = 0;
4766 if (ret < 0) {
4767 return ret;
4770 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4771 * in the case of cache=unsafe, so there are no useless flushes.
4773 flush_parent:
4774 return bdrv_co_flush(bs->file);
4777 void bdrv_invalidate_cache(BlockDriverState *bs)
4779 if (bs->drv && bs->drv->bdrv_invalidate_cache) {
4780 bs->drv->bdrv_invalidate_cache(bs);
4784 void bdrv_invalidate_cache_all(void)
4786 BlockDriverState *bs;
4788 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4789 bdrv_invalidate_cache(bs);
4793 void bdrv_clear_incoming_migration_all(void)
4795 BlockDriverState *bs;
4797 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4798 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4802 int bdrv_flush(BlockDriverState *bs)
4804 Coroutine *co;
4805 RwCo rwco = {
4806 .bs = bs,
4807 .ret = NOT_DONE,
4810 if (qemu_in_coroutine()) {
4811 /* Fast-path if already in coroutine context */
4812 bdrv_flush_co_entry(&rwco);
4813 } else {
4814 co = qemu_coroutine_create(bdrv_flush_co_entry);
4815 qemu_coroutine_enter(co, &rwco);
4816 while (rwco.ret == NOT_DONE) {
4817 qemu_aio_wait();
4821 return rwco.ret;
4824 typedef struct DiscardCo {
4825 BlockDriverState *bs;
4826 int64_t sector_num;
4827 int nb_sectors;
4828 int ret;
4829 } DiscardCo;
4830 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4832 DiscardCo *rwco = opaque;
4834 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4837 /* if no limit is specified in the BlockLimits use a default
4838 * of 32768 512-byte sectors (16 MiB) per request.
4840 #define MAX_DISCARD_DEFAULT 32768
4842 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4843 int nb_sectors)
4845 int max_discard;
4847 if (!bs->drv) {
4848 return -ENOMEDIUM;
4849 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4850 return -EIO;
4851 } else if (bs->read_only) {
4852 return -EROFS;
4855 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4857 /* Do nothing if disabled. */
4858 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4859 return 0;
4862 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
4863 return 0;
4866 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
4867 while (nb_sectors > 0) {
4868 int ret;
4869 int num = nb_sectors;
4871 /* align request */
4872 if (bs->bl.discard_alignment &&
4873 num >= bs->bl.discard_alignment &&
4874 sector_num % bs->bl.discard_alignment) {
4875 if (num > bs->bl.discard_alignment) {
4876 num = bs->bl.discard_alignment;
4878 num -= sector_num % bs->bl.discard_alignment;
4881 /* limit request size */
4882 if (num > max_discard) {
4883 num = max_discard;
4886 if (bs->drv->bdrv_co_discard) {
4887 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
4888 } else {
4889 BlockDriverAIOCB *acb;
4890 CoroutineIOCompletion co = {
4891 .coroutine = qemu_coroutine_self(),
4894 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4895 bdrv_co_io_em_complete, &co);
4896 if (acb == NULL) {
4897 return -EIO;
4898 } else {
4899 qemu_coroutine_yield();
4900 ret = co.ret;
4903 if (ret && ret != -ENOTSUP) {
4904 return ret;
4907 sector_num += num;
4908 nb_sectors -= num;
4910 return 0;
4913 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4915 Coroutine *co;
4916 DiscardCo rwco = {
4917 .bs = bs,
4918 .sector_num = sector_num,
4919 .nb_sectors = nb_sectors,
4920 .ret = NOT_DONE,
4923 if (qemu_in_coroutine()) {
4924 /* Fast-path if already in coroutine context */
4925 bdrv_discard_co_entry(&rwco);
4926 } else {
4927 co = qemu_coroutine_create(bdrv_discard_co_entry);
4928 qemu_coroutine_enter(co, &rwco);
4929 while (rwco.ret == NOT_DONE) {
4930 qemu_aio_wait();
4934 return rwco.ret;
4937 /**************************************************************/
4938 /* removable device support */
4941 * Return TRUE if the media is present
4943 int bdrv_is_inserted(BlockDriverState *bs)
4945 BlockDriver *drv = bs->drv;
4947 if (!drv)
4948 return 0;
4949 if (!drv->bdrv_is_inserted)
4950 return 1;
4951 return drv->bdrv_is_inserted(bs);
4955 * Return whether the media changed since the last call to this
4956 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4958 int bdrv_media_changed(BlockDriverState *bs)
4960 BlockDriver *drv = bs->drv;
4962 if (drv && drv->bdrv_media_changed) {
4963 return drv->bdrv_media_changed(bs);
4965 return -ENOTSUP;
4969 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4971 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
4973 BlockDriver *drv = bs->drv;
4975 if (drv && drv->bdrv_eject) {
4976 drv->bdrv_eject(bs, eject_flag);
4979 if (bs->device_name[0] != '\0') {
4980 bdrv_emit_qmp_eject_event(bs, eject_flag);
4985 * Lock or unlock the media (if it is locked, the user won't be able
4986 * to eject it manually).
4988 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
4990 BlockDriver *drv = bs->drv;
4992 trace_bdrv_lock_medium(bs, locked);
4994 if (drv && drv->bdrv_lock_medium) {
4995 drv->bdrv_lock_medium(bs, locked);
4999 /* needed for generic scsi interface */
5001 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5003 BlockDriver *drv = bs->drv;
5005 if (drv && drv->bdrv_ioctl)
5006 return drv->bdrv_ioctl(bs, req, buf);
5007 return -ENOTSUP;
5010 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5011 unsigned long int req, void *buf,
5012 BlockDriverCompletionFunc *cb, void *opaque)
5014 BlockDriver *drv = bs->drv;
5016 if (drv && drv->bdrv_aio_ioctl)
5017 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5018 return NULL;
5021 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5023 bs->guest_block_size = align;
5026 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5028 return qemu_memalign(bdrv_opt_mem_align(bs), size);
5032 * Check if all memory in this vector is sector aligned.
5034 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5036 int i;
5037 size_t alignment = bdrv_opt_mem_align(bs);
5039 for (i = 0; i < qiov->niov; i++) {
5040 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5041 return false;
5043 if (qiov->iov[i].iov_len % alignment) {
5044 return false;
5048 return true;
5051 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity)
5053 int64_t bitmap_size;
5054 BdrvDirtyBitmap *bitmap;
5056 assert((granularity & (granularity - 1)) == 0);
5058 granularity >>= BDRV_SECTOR_BITS;
5059 assert(granularity);
5060 bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
5061 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5062 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5063 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5064 return bitmap;
5067 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5069 BdrvDirtyBitmap *bm, *next;
5070 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5071 if (bm == bitmap) {
5072 QLIST_REMOVE(bitmap, list);
5073 hbitmap_free(bitmap->bitmap);
5074 g_free(bitmap);
5075 return;
5080 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5082 BdrvDirtyBitmap *bm;
5083 BlockDirtyInfoList *list = NULL;
5084 BlockDirtyInfoList **plist = &list;
5086 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5087 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5088 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5089 info->count = bdrv_get_dirty_count(bs, bm);
5090 info->granularity =
5091 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5092 entry->value = info;
5093 *plist = entry;
5094 plist = &entry->next;
5097 return list;
5100 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5102 if (bitmap) {
5103 return hbitmap_get(bitmap->bitmap, sector);
5104 } else {
5105 return 0;
5109 void bdrv_dirty_iter_init(BlockDriverState *bs,
5110 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5112 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5115 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5116 int nr_sectors)
5118 BdrvDirtyBitmap *bitmap;
5119 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5120 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5124 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5126 BdrvDirtyBitmap *bitmap;
5127 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5128 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5132 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5134 return hbitmap_count(bitmap->bitmap);
5137 /* Get a reference to bs */
5138 void bdrv_ref(BlockDriverState *bs)
5140 bs->refcnt++;
5143 /* Release a previously grabbed reference to bs.
5144 * If after releasing, reference count is zero, the BlockDriverState is
5145 * deleted. */
5146 void bdrv_unref(BlockDriverState *bs)
5148 assert(bs->refcnt > 0);
5149 if (--bs->refcnt == 0) {
5150 bdrv_delete(bs);
5154 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
5156 assert(bs->in_use != in_use);
5157 bs->in_use = in_use;
5160 int bdrv_in_use(BlockDriverState *bs)
5162 return bs->in_use;
5165 void bdrv_iostatus_enable(BlockDriverState *bs)
5167 bs->iostatus_enabled = true;
5168 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5171 /* The I/O status is only enabled if the drive explicitly
5172 * enables it _and_ the VM is configured to stop on errors */
5173 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5175 return (bs->iostatus_enabled &&
5176 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5177 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5178 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5181 void bdrv_iostatus_disable(BlockDriverState *bs)
5183 bs->iostatus_enabled = false;
5186 void bdrv_iostatus_reset(BlockDriverState *bs)
5188 if (bdrv_iostatus_is_enabled(bs)) {
5189 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5190 if (bs->job) {
5191 block_job_iostatus_reset(bs->job);
5196 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5198 assert(bdrv_iostatus_is_enabled(bs));
5199 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5200 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5201 BLOCK_DEVICE_IO_STATUS_FAILED;
5205 void
5206 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5207 enum BlockAcctType type)
5209 assert(type < BDRV_MAX_IOTYPE);
5211 cookie->bytes = bytes;
5212 cookie->start_time_ns = get_clock();
5213 cookie->type = type;
5216 void
5217 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5219 assert(cookie->type < BDRV_MAX_IOTYPE);
5221 bs->nr_bytes[cookie->type] += cookie->bytes;
5222 bs->nr_ops[cookie->type]++;
5223 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5226 void bdrv_img_create(const char *filename, const char *fmt,
5227 const char *base_filename, const char *base_fmt,
5228 char *options, uint64_t img_size, int flags,
5229 Error **errp, bool quiet)
5231 QEMUOptionParameter *param = NULL, *create_options = NULL;
5232 QEMUOptionParameter *backing_fmt, *backing_file, *size;
5233 BlockDriver *drv, *proto_drv;
5234 BlockDriver *backing_drv = NULL;
5235 Error *local_err = NULL;
5236 int ret = 0;
5238 /* Find driver and parse its options */
5239 drv = bdrv_find_format(fmt);
5240 if (!drv) {
5241 error_setg(errp, "Unknown file format '%s'", fmt);
5242 return;
5245 proto_drv = bdrv_find_protocol(filename, true);
5246 if (!proto_drv) {
5247 error_setg(errp, "Unknown protocol '%s'", filename);
5248 return;
5251 create_options = append_option_parameters(create_options,
5252 drv->create_options);
5253 create_options = append_option_parameters(create_options,
5254 proto_drv->create_options);
5256 /* Create parameter list with default values */
5257 param = parse_option_parameters("", create_options, param);
5259 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
5261 /* Parse -o options */
5262 if (options) {
5263 param = parse_option_parameters(options, create_options, param);
5264 if (param == NULL) {
5265 error_setg(errp, "Invalid options for file format '%s'.", fmt);
5266 goto out;
5270 if (base_filename) {
5271 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
5272 base_filename)) {
5273 error_setg(errp, "Backing file not supported for file format '%s'",
5274 fmt);
5275 goto out;
5279 if (base_fmt) {
5280 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5281 error_setg(errp, "Backing file format not supported for file "
5282 "format '%s'", fmt);
5283 goto out;
5287 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
5288 if (backing_file && backing_file->value.s) {
5289 if (!strcmp(filename, backing_file->value.s)) {
5290 error_setg(errp, "Error: Trying to create an image with the "
5291 "same filename as the backing file");
5292 goto out;
5296 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
5297 if (backing_fmt && backing_fmt->value.s) {
5298 backing_drv = bdrv_find_format(backing_fmt->value.s);
5299 if (!backing_drv) {
5300 error_setg(errp, "Unknown backing file format '%s'",
5301 backing_fmt->value.s);
5302 goto out;
5306 // The size for the image must always be specified, with one exception:
5307 // If we are using a backing file, we can obtain the size from there
5308 size = get_option_parameter(param, BLOCK_OPT_SIZE);
5309 if (size && size->value.n == -1) {
5310 if (backing_file && backing_file->value.s) {
5311 BlockDriverState *bs;
5312 uint64_t size;
5313 char buf[32];
5314 int back_flags;
5316 /* backing files always opened read-only */
5317 back_flags =
5318 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5320 bs = NULL;
5321 ret = bdrv_open(&bs, backing_file->value.s, NULL, NULL, back_flags,
5322 backing_drv, &local_err);
5323 if (ret < 0) {
5324 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5325 backing_file->value.s,
5326 error_get_pretty(local_err));
5327 error_free(local_err);
5328 local_err = NULL;
5329 goto out;
5331 bdrv_get_geometry(bs, &size);
5332 size *= 512;
5334 snprintf(buf, sizeof(buf), "%" PRId64, size);
5335 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
5337 bdrv_unref(bs);
5338 } else {
5339 error_setg(errp, "Image creation needs a size parameter");
5340 goto out;
5344 if (!quiet) {
5345 printf("Formatting '%s', fmt=%s ", filename, fmt);
5346 print_option_parameters(param);
5347 puts("");
5349 ret = bdrv_create(drv, filename, param, &local_err);
5350 if (ret == -EFBIG) {
5351 /* This is generally a better message than whatever the driver would
5352 * deliver (especially because of the cluster_size_hint), since that
5353 * is most probably not much different from "image too large". */
5354 const char *cluster_size_hint = "";
5355 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
5356 cluster_size_hint = " (try using a larger cluster size)";
5358 error_setg(errp, "The image size is too large for file format '%s'"
5359 "%s", fmt, cluster_size_hint);
5360 error_free(local_err);
5361 local_err = NULL;
5364 out:
5365 free_option_parameters(create_options);
5366 free_option_parameters(param);
5368 if (local_err) {
5369 error_propagate(errp, local_err);
5373 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5375 /* Currently BlockDriverState always uses the main loop AioContext */
5376 return qemu_get_aio_context();
5379 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5380 NotifierWithReturn *notifier)
5382 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5385 int bdrv_amend_options(BlockDriverState *bs, QEMUOptionParameter *options)
5387 if (bs->drv->bdrv_amend_options == NULL) {
5388 return -ENOTSUP;
5390 return bs->drv->bdrv_amend_options(bs, options);
5393 /* Used to recurse on single child block filters.
5394 * Single child block filter will store their child in bs->file.
5396 bool bdrv_generic_is_first_non_filter(BlockDriverState *bs,
5397 BlockDriverState *candidate)
5399 if (!bs->drv) {
5400 return false;
5403 if (!bs->drv->authorizations[BS_IS_A_FILTER]) {
5404 if (bs == candidate) {
5405 return true;
5406 } else {
5407 return false;
5411 if (!bs->drv->authorizations[BS_FILTER_PASS_DOWN]) {
5412 return false;
5415 if (!bs->file) {
5416 return false;
5419 return bdrv_recurse_is_first_non_filter(bs->file, candidate);
5422 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5423 BlockDriverState *candidate)
5425 if (bs->drv && bs->drv->bdrv_recurse_is_first_non_filter) {
5426 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5429 return bdrv_generic_is_first_non_filter(bs, candidate);
5432 /* This function checks if the candidate is the first non filter bs down it's
5433 * bs chain. Since we don't have pointers to parents it explore all bs chains
5434 * from the top. Some filters can choose not to pass down the recursion.
5436 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5438 BlockDriverState *bs;
5440 /* walk down the bs forest recursively */
5441 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5442 bool perm;
5444 perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5446 /* candidate is the first non filter */
5447 if (perm) {
5448 return true;
5452 return false;