net: cadence_gem: Make phy respond to broadcast
[qemu.git] / block / qcow2.c
blobe903d971c30728ea165cba7fcddc92cafd7fdb02
1 /*
2 * Block driver for the QCOW version 2 format
4 * Copyright (c) 2004-2006 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "qemu-common.h"
25 #include "block/block_int.h"
26 #include "qemu/module.h"
27 #include <zlib.h>
28 #include "qemu/aes.h"
29 #include "block/qcow2.h"
30 #include "qemu/error-report.h"
31 #include "qapi/qmp/qerror.h"
32 #include "qapi/qmp/qbool.h"
33 #include "trace.h"
36 Differences with QCOW:
38 - Support for multiple incremental snapshots.
39 - Memory management by reference counts.
40 - Clusters which have a reference count of one have the bit
41 QCOW_OFLAG_COPIED to optimize write performance.
42 - Size of compressed clusters is stored in sectors to reduce bit usage
43 in the cluster offsets.
44 - Support for storing additional data (such as the VM state) in the
45 snapshots.
46 - If a backing store is used, the cluster size is not constrained
47 (could be backported to QCOW).
48 - L2 tables have always a size of one cluster.
52 typedef struct {
53 uint32_t magic;
54 uint32_t len;
55 } QEMU_PACKED QCowExtension;
57 #define QCOW2_EXT_MAGIC_END 0
58 #define QCOW2_EXT_MAGIC_BACKING_FORMAT 0xE2792ACA
59 #define QCOW2_EXT_MAGIC_FEATURE_TABLE 0x6803f857
61 static int qcow2_probe(const uint8_t *buf, int buf_size, const char *filename)
63 const QCowHeader *cow_header = (const void *)buf;
65 if (buf_size >= sizeof(QCowHeader) &&
66 be32_to_cpu(cow_header->magic) == QCOW_MAGIC &&
67 be32_to_cpu(cow_header->version) >= 2)
68 return 100;
69 else
70 return 0;
74 /*
75 * read qcow2 extension and fill bs
76 * start reading from start_offset
77 * finish reading upon magic of value 0 or when end_offset reached
78 * unknown magic is skipped (future extension this version knows nothing about)
79 * return 0 upon success, non-0 otherwise
81 static int qcow2_read_extensions(BlockDriverState *bs, uint64_t start_offset,
82 uint64_t end_offset, void **p_feature_table,
83 Error **errp)
85 BDRVQcowState *s = bs->opaque;
86 QCowExtension ext;
87 uint64_t offset;
88 int ret;
90 #ifdef DEBUG_EXT
91 printf("qcow2_read_extensions: start=%ld end=%ld\n", start_offset, end_offset);
92 #endif
93 offset = start_offset;
94 while (offset < end_offset) {
96 #ifdef DEBUG_EXT
97 /* Sanity check */
98 if (offset > s->cluster_size)
99 printf("qcow2_read_extension: suspicious offset %lu\n", offset);
101 printf("attempting to read extended header in offset %lu\n", offset);
102 #endif
104 ret = bdrv_pread(bs->file, offset, &ext, sizeof(ext));
105 if (ret < 0) {
106 error_setg_errno(errp, -ret, "qcow2_read_extension: ERROR: "
107 "pread fail from offset %" PRIu64, offset);
108 return 1;
110 be32_to_cpus(&ext.magic);
111 be32_to_cpus(&ext.len);
112 offset += sizeof(ext);
113 #ifdef DEBUG_EXT
114 printf("ext.magic = 0x%x\n", ext.magic);
115 #endif
116 if (ext.len > end_offset - offset) {
117 error_setg(errp, "Header extension too large");
118 return -EINVAL;
121 switch (ext.magic) {
122 case QCOW2_EXT_MAGIC_END:
123 return 0;
125 case QCOW2_EXT_MAGIC_BACKING_FORMAT:
126 if (ext.len >= sizeof(bs->backing_format)) {
127 error_setg(errp, "ERROR: ext_backing_format: len=%u too large"
128 " (>=%zu)", ext.len, sizeof(bs->backing_format));
129 return 2;
131 ret = bdrv_pread(bs->file, offset, bs->backing_format, ext.len);
132 if (ret < 0) {
133 error_setg_errno(errp, -ret, "ERROR: ext_backing_format: "
134 "Could not read format name");
135 return 3;
137 bs->backing_format[ext.len] = '\0';
138 #ifdef DEBUG_EXT
139 printf("Qcow2: Got format extension %s\n", bs->backing_format);
140 #endif
141 break;
143 case QCOW2_EXT_MAGIC_FEATURE_TABLE:
144 if (p_feature_table != NULL) {
145 void* feature_table = g_malloc0(ext.len + 2 * sizeof(Qcow2Feature));
146 ret = bdrv_pread(bs->file, offset , feature_table, ext.len);
147 if (ret < 0) {
148 error_setg_errno(errp, -ret, "ERROR: ext_feature_table: "
149 "Could not read table");
150 return ret;
153 *p_feature_table = feature_table;
155 break;
157 default:
158 /* unknown magic - save it in case we need to rewrite the header */
160 Qcow2UnknownHeaderExtension *uext;
162 uext = g_malloc0(sizeof(*uext) + ext.len);
163 uext->magic = ext.magic;
164 uext->len = ext.len;
165 QLIST_INSERT_HEAD(&s->unknown_header_ext, uext, next);
167 ret = bdrv_pread(bs->file, offset , uext->data, uext->len);
168 if (ret < 0) {
169 error_setg_errno(errp, -ret, "ERROR: unknown extension: "
170 "Could not read data");
171 return ret;
174 break;
177 offset += ((ext.len + 7) & ~7);
180 return 0;
183 static void cleanup_unknown_header_ext(BlockDriverState *bs)
185 BDRVQcowState *s = bs->opaque;
186 Qcow2UnknownHeaderExtension *uext, *next;
188 QLIST_FOREACH_SAFE(uext, &s->unknown_header_ext, next, next) {
189 QLIST_REMOVE(uext, next);
190 g_free(uext);
194 static void GCC_FMT_ATTR(3, 4) report_unsupported(BlockDriverState *bs,
195 Error **errp, const char *fmt, ...)
197 char msg[64];
198 va_list ap;
200 va_start(ap, fmt);
201 vsnprintf(msg, sizeof(msg), fmt, ap);
202 va_end(ap);
204 error_set(errp, QERR_UNKNOWN_BLOCK_FORMAT_FEATURE, bs->device_name, "qcow2",
205 msg);
208 static void report_unsupported_feature(BlockDriverState *bs,
209 Error **errp, Qcow2Feature *table, uint64_t mask)
211 while (table && table->name[0] != '\0') {
212 if (table->type == QCOW2_FEAT_TYPE_INCOMPATIBLE) {
213 if (mask & (1 << table->bit)) {
214 report_unsupported(bs, errp, "%.46s", table->name);
215 mask &= ~(1 << table->bit);
218 table++;
221 if (mask) {
222 report_unsupported(bs, errp, "Unknown incompatible feature: %" PRIx64,
223 mask);
228 * Sets the dirty bit and flushes afterwards if necessary.
230 * The incompatible_features bit is only set if the image file header was
231 * updated successfully. Therefore it is not required to check the return
232 * value of this function.
234 int qcow2_mark_dirty(BlockDriverState *bs)
236 BDRVQcowState *s = bs->opaque;
237 uint64_t val;
238 int ret;
240 assert(s->qcow_version >= 3);
242 if (s->incompatible_features & QCOW2_INCOMPAT_DIRTY) {
243 return 0; /* already dirty */
246 val = cpu_to_be64(s->incompatible_features | QCOW2_INCOMPAT_DIRTY);
247 ret = bdrv_pwrite(bs->file, offsetof(QCowHeader, incompatible_features),
248 &val, sizeof(val));
249 if (ret < 0) {
250 return ret;
252 ret = bdrv_flush(bs->file);
253 if (ret < 0) {
254 return ret;
257 /* Only treat image as dirty if the header was updated successfully */
258 s->incompatible_features |= QCOW2_INCOMPAT_DIRTY;
259 return 0;
263 * Clears the dirty bit and flushes before if necessary. Only call this
264 * function when there are no pending requests, it does not guard against
265 * concurrent requests dirtying the image.
267 static int qcow2_mark_clean(BlockDriverState *bs)
269 BDRVQcowState *s = bs->opaque;
271 if (s->incompatible_features & QCOW2_INCOMPAT_DIRTY) {
272 int ret;
274 s->incompatible_features &= ~QCOW2_INCOMPAT_DIRTY;
276 ret = bdrv_flush(bs);
277 if (ret < 0) {
278 return ret;
281 return qcow2_update_header(bs);
283 return 0;
287 * Marks the image as corrupt.
289 int qcow2_mark_corrupt(BlockDriverState *bs)
291 BDRVQcowState *s = bs->opaque;
293 s->incompatible_features |= QCOW2_INCOMPAT_CORRUPT;
294 return qcow2_update_header(bs);
298 * Marks the image as consistent, i.e., unsets the corrupt bit, and flushes
299 * before if necessary.
301 int qcow2_mark_consistent(BlockDriverState *bs)
303 BDRVQcowState *s = bs->opaque;
305 if (s->incompatible_features & QCOW2_INCOMPAT_CORRUPT) {
306 int ret = bdrv_flush(bs);
307 if (ret < 0) {
308 return ret;
311 s->incompatible_features &= ~QCOW2_INCOMPAT_CORRUPT;
312 return qcow2_update_header(bs);
314 return 0;
317 static int qcow2_check(BlockDriverState *bs, BdrvCheckResult *result,
318 BdrvCheckMode fix)
320 int ret = qcow2_check_refcounts(bs, result, fix);
321 if (ret < 0) {
322 return ret;
325 if (fix && result->check_errors == 0 && result->corruptions == 0) {
326 ret = qcow2_mark_clean(bs);
327 if (ret < 0) {
328 return ret;
330 return qcow2_mark_consistent(bs);
332 return ret;
335 static int validate_table_offset(BlockDriverState *bs, uint64_t offset,
336 uint64_t entries, size_t entry_len)
338 BDRVQcowState *s = bs->opaque;
339 uint64_t size;
341 /* Use signed INT64_MAX as the maximum even for uint64_t header fields,
342 * because values will be passed to qemu functions taking int64_t. */
343 if (entries > INT64_MAX / entry_len) {
344 return -EINVAL;
347 size = entries * entry_len;
349 if (INT64_MAX - size < offset) {
350 return -EINVAL;
353 /* Tables must be cluster aligned */
354 if (offset & (s->cluster_size - 1)) {
355 return -EINVAL;
358 return 0;
361 static QemuOptsList qcow2_runtime_opts = {
362 .name = "qcow2",
363 .head = QTAILQ_HEAD_INITIALIZER(qcow2_runtime_opts.head),
364 .desc = {
366 .name = QCOW2_OPT_LAZY_REFCOUNTS,
367 .type = QEMU_OPT_BOOL,
368 .help = "Postpone refcount updates",
371 .name = QCOW2_OPT_DISCARD_REQUEST,
372 .type = QEMU_OPT_BOOL,
373 .help = "Pass guest discard requests to the layer below",
376 .name = QCOW2_OPT_DISCARD_SNAPSHOT,
377 .type = QEMU_OPT_BOOL,
378 .help = "Generate discard requests when snapshot related space "
379 "is freed",
382 .name = QCOW2_OPT_DISCARD_OTHER,
383 .type = QEMU_OPT_BOOL,
384 .help = "Generate discard requests when other clusters are freed",
387 .name = QCOW2_OPT_OVERLAP,
388 .type = QEMU_OPT_STRING,
389 .help = "Selects which overlap checks to perform from a range of "
390 "templates (none, constant, cached, all)",
393 .name = QCOW2_OPT_OVERLAP_MAIN_HEADER,
394 .type = QEMU_OPT_BOOL,
395 .help = "Check for unintended writes into the main qcow2 header",
398 .name = QCOW2_OPT_OVERLAP_ACTIVE_L1,
399 .type = QEMU_OPT_BOOL,
400 .help = "Check for unintended writes into the active L1 table",
403 .name = QCOW2_OPT_OVERLAP_ACTIVE_L2,
404 .type = QEMU_OPT_BOOL,
405 .help = "Check for unintended writes into an active L2 table",
408 .name = QCOW2_OPT_OVERLAP_REFCOUNT_TABLE,
409 .type = QEMU_OPT_BOOL,
410 .help = "Check for unintended writes into the refcount table",
413 .name = QCOW2_OPT_OVERLAP_REFCOUNT_BLOCK,
414 .type = QEMU_OPT_BOOL,
415 .help = "Check for unintended writes into a refcount block",
418 .name = QCOW2_OPT_OVERLAP_SNAPSHOT_TABLE,
419 .type = QEMU_OPT_BOOL,
420 .help = "Check for unintended writes into the snapshot table",
423 .name = QCOW2_OPT_OVERLAP_INACTIVE_L1,
424 .type = QEMU_OPT_BOOL,
425 .help = "Check for unintended writes into an inactive L1 table",
428 .name = QCOW2_OPT_OVERLAP_INACTIVE_L2,
429 .type = QEMU_OPT_BOOL,
430 .help = "Check for unintended writes into an inactive L2 table",
432 { /* end of list */ }
436 static const char *overlap_bool_option_names[QCOW2_OL_MAX_BITNR] = {
437 [QCOW2_OL_MAIN_HEADER_BITNR] = QCOW2_OPT_OVERLAP_MAIN_HEADER,
438 [QCOW2_OL_ACTIVE_L1_BITNR] = QCOW2_OPT_OVERLAP_ACTIVE_L1,
439 [QCOW2_OL_ACTIVE_L2_BITNR] = QCOW2_OPT_OVERLAP_ACTIVE_L2,
440 [QCOW2_OL_REFCOUNT_TABLE_BITNR] = QCOW2_OPT_OVERLAP_REFCOUNT_TABLE,
441 [QCOW2_OL_REFCOUNT_BLOCK_BITNR] = QCOW2_OPT_OVERLAP_REFCOUNT_BLOCK,
442 [QCOW2_OL_SNAPSHOT_TABLE_BITNR] = QCOW2_OPT_OVERLAP_SNAPSHOT_TABLE,
443 [QCOW2_OL_INACTIVE_L1_BITNR] = QCOW2_OPT_OVERLAP_INACTIVE_L1,
444 [QCOW2_OL_INACTIVE_L2_BITNR] = QCOW2_OPT_OVERLAP_INACTIVE_L2,
447 static int qcow2_open(BlockDriverState *bs, QDict *options, int flags,
448 Error **errp)
450 BDRVQcowState *s = bs->opaque;
451 unsigned int len, i;
452 int ret = 0;
453 QCowHeader header;
454 QemuOpts *opts;
455 Error *local_err = NULL;
456 uint64_t ext_end;
457 uint64_t l1_vm_state_index;
458 const char *opt_overlap_check;
459 int overlap_check_template = 0;
461 ret = bdrv_pread(bs->file, 0, &header, sizeof(header));
462 if (ret < 0) {
463 error_setg_errno(errp, -ret, "Could not read qcow2 header");
464 goto fail;
466 be32_to_cpus(&header.magic);
467 be32_to_cpus(&header.version);
468 be64_to_cpus(&header.backing_file_offset);
469 be32_to_cpus(&header.backing_file_size);
470 be64_to_cpus(&header.size);
471 be32_to_cpus(&header.cluster_bits);
472 be32_to_cpus(&header.crypt_method);
473 be64_to_cpus(&header.l1_table_offset);
474 be32_to_cpus(&header.l1_size);
475 be64_to_cpus(&header.refcount_table_offset);
476 be32_to_cpus(&header.refcount_table_clusters);
477 be64_to_cpus(&header.snapshots_offset);
478 be32_to_cpus(&header.nb_snapshots);
480 if (header.magic != QCOW_MAGIC) {
481 error_setg(errp, "Image is not in qcow2 format");
482 ret = -EINVAL;
483 goto fail;
485 if (header.version < 2 || header.version > 3) {
486 report_unsupported(bs, errp, "QCOW version %d", header.version);
487 ret = -ENOTSUP;
488 goto fail;
491 s->qcow_version = header.version;
493 /* Initialise cluster size */
494 if (header.cluster_bits < MIN_CLUSTER_BITS ||
495 header.cluster_bits > MAX_CLUSTER_BITS) {
496 error_setg(errp, "Unsupported cluster size: 2^%i", header.cluster_bits);
497 ret = -EINVAL;
498 goto fail;
501 s->cluster_bits = header.cluster_bits;
502 s->cluster_size = 1 << s->cluster_bits;
503 s->cluster_sectors = 1 << (s->cluster_bits - 9);
505 /* Initialise version 3 header fields */
506 if (header.version == 2) {
507 header.incompatible_features = 0;
508 header.compatible_features = 0;
509 header.autoclear_features = 0;
510 header.refcount_order = 4;
511 header.header_length = 72;
512 } else {
513 be64_to_cpus(&header.incompatible_features);
514 be64_to_cpus(&header.compatible_features);
515 be64_to_cpus(&header.autoclear_features);
516 be32_to_cpus(&header.refcount_order);
517 be32_to_cpus(&header.header_length);
519 if (header.header_length < 104) {
520 error_setg(errp, "qcow2 header too short");
521 ret = -EINVAL;
522 goto fail;
526 if (header.header_length > s->cluster_size) {
527 error_setg(errp, "qcow2 header exceeds cluster size");
528 ret = -EINVAL;
529 goto fail;
532 if (header.header_length > sizeof(header)) {
533 s->unknown_header_fields_size = header.header_length - sizeof(header);
534 s->unknown_header_fields = g_malloc(s->unknown_header_fields_size);
535 ret = bdrv_pread(bs->file, sizeof(header), s->unknown_header_fields,
536 s->unknown_header_fields_size);
537 if (ret < 0) {
538 error_setg_errno(errp, -ret, "Could not read unknown qcow2 header "
539 "fields");
540 goto fail;
544 if (header.backing_file_offset > s->cluster_size) {
545 error_setg(errp, "Invalid backing file offset");
546 ret = -EINVAL;
547 goto fail;
550 if (header.backing_file_offset) {
551 ext_end = header.backing_file_offset;
552 } else {
553 ext_end = 1 << header.cluster_bits;
556 /* Handle feature bits */
557 s->incompatible_features = header.incompatible_features;
558 s->compatible_features = header.compatible_features;
559 s->autoclear_features = header.autoclear_features;
561 if (s->incompatible_features & ~QCOW2_INCOMPAT_MASK) {
562 void *feature_table = NULL;
563 qcow2_read_extensions(bs, header.header_length, ext_end,
564 &feature_table, NULL);
565 report_unsupported_feature(bs, errp, feature_table,
566 s->incompatible_features &
567 ~QCOW2_INCOMPAT_MASK);
568 ret = -ENOTSUP;
569 g_free(feature_table);
570 goto fail;
573 if (s->incompatible_features & QCOW2_INCOMPAT_CORRUPT) {
574 /* Corrupt images may not be written to unless they are being repaired
576 if ((flags & BDRV_O_RDWR) && !(flags & BDRV_O_CHECK)) {
577 error_setg(errp, "qcow2: Image is corrupt; cannot be opened "
578 "read/write");
579 ret = -EACCES;
580 goto fail;
584 /* Check support for various header values */
585 if (header.refcount_order != 4) {
586 report_unsupported(bs, errp, "%d bit reference counts",
587 1 << header.refcount_order);
588 ret = -ENOTSUP;
589 goto fail;
591 s->refcount_order = header.refcount_order;
593 if (header.crypt_method > QCOW_CRYPT_AES) {
594 error_setg(errp, "Unsupported encryption method: %i",
595 header.crypt_method);
596 ret = -EINVAL;
597 goto fail;
599 s->crypt_method_header = header.crypt_method;
600 if (s->crypt_method_header) {
601 bs->encrypted = 1;
604 s->l2_bits = s->cluster_bits - 3; /* L2 is always one cluster */
605 s->l2_size = 1 << s->l2_bits;
606 bs->total_sectors = header.size / 512;
607 s->csize_shift = (62 - (s->cluster_bits - 8));
608 s->csize_mask = (1 << (s->cluster_bits - 8)) - 1;
609 s->cluster_offset_mask = (1LL << s->csize_shift) - 1;
611 s->refcount_table_offset = header.refcount_table_offset;
612 s->refcount_table_size =
613 header.refcount_table_clusters << (s->cluster_bits - 3);
615 if (header.refcount_table_clusters > qcow2_max_refcount_clusters(s)) {
616 error_setg(errp, "Reference count table too large");
617 ret = -EINVAL;
618 goto fail;
621 ret = validate_table_offset(bs, s->refcount_table_offset,
622 s->refcount_table_size, sizeof(uint64_t));
623 if (ret < 0) {
624 error_setg(errp, "Invalid reference count table offset");
625 goto fail;
628 /* Snapshot table offset/length */
629 if (header.nb_snapshots > QCOW_MAX_SNAPSHOTS) {
630 error_setg(errp, "Too many snapshots");
631 ret = -EINVAL;
632 goto fail;
635 ret = validate_table_offset(bs, header.snapshots_offset,
636 header.nb_snapshots,
637 sizeof(QCowSnapshotHeader));
638 if (ret < 0) {
639 error_setg(errp, "Invalid snapshot table offset");
640 goto fail;
643 /* read the level 1 table */
644 if (header.l1_size > QCOW_MAX_L1_SIZE) {
645 error_setg(errp, "Active L1 table too large");
646 ret = -EFBIG;
647 goto fail;
649 s->l1_size = header.l1_size;
651 l1_vm_state_index = size_to_l1(s, header.size);
652 if (l1_vm_state_index > INT_MAX) {
653 error_setg(errp, "Image is too big");
654 ret = -EFBIG;
655 goto fail;
657 s->l1_vm_state_index = l1_vm_state_index;
659 /* the L1 table must contain at least enough entries to put
660 header.size bytes */
661 if (s->l1_size < s->l1_vm_state_index) {
662 error_setg(errp, "L1 table is too small");
663 ret = -EINVAL;
664 goto fail;
667 ret = validate_table_offset(bs, header.l1_table_offset,
668 header.l1_size, sizeof(uint64_t));
669 if (ret < 0) {
670 error_setg(errp, "Invalid L1 table offset");
671 goto fail;
673 s->l1_table_offset = header.l1_table_offset;
676 if (s->l1_size > 0) {
677 s->l1_table = g_malloc0(
678 align_offset(s->l1_size * sizeof(uint64_t), 512));
679 ret = bdrv_pread(bs->file, s->l1_table_offset, s->l1_table,
680 s->l1_size * sizeof(uint64_t));
681 if (ret < 0) {
682 error_setg_errno(errp, -ret, "Could not read L1 table");
683 goto fail;
685 for(i = 0;i < s->l1_size; i++) {
686 be64_to_cpus(&s->l1_table[i]);
690 /* alloc L2 table/refcount block cache */
691 s->l2_table_cache = qcow2_cache_create(bs, L2_CACHE_SIZE);
692 s->refcount_block_cache = qcow2_cache_create(bs, REFCOUNT_CACHE_SIZE);
694 s->cluster_cache = g_malloc(s->cluster_size);
695 /* one more sector for decompressed data alignment */
696 s->cluster_data = qemu_blockalign(bs, QCOW_MAX_CRYPT_CLUSTERS * s->cluster_size
697 + 512);
698 s->cluster_cache_offset = -1;
699 s->flags = flags;
701 ret = qcow2_refcount_init(bs);
702 if (ret != 0) {
703 error_setg_errno(errp, -ret, "Could not initialize refcount handling");
704 goto fail;
707 QLIST_INIT(&s->cluster_allocs);
708 QTAILQ_INIT(&s->discards);
710 /* read qcow2 extensions */
711 if (qcow2_read_extensions(bs, header.header_length, ext_end, NULL,
712 &local_err)) {
713 error_propagate(errp, local_err);
714 ret = -EINVAL;
715 goto fail;
718 /* read the backing file name */
719 if (header.backing_file_offset != 0) {
720 len = header.backing_file_size;
721 if (len > MIN(1023, s->cluster_size - header.backing_file_offset)) {
722 error_setg(errp, "Backing file name too long");
723 ret = -EINVAL;
724 goto fail;
726 ret = bdrv_pread(bs->file, header.backing_file_offset,
727 bs->backing_file, len);
728 if (ret < 0) {
729 error_setg_errno(errp, -ret, "Could not read backing file name");
730 goto fail;
732 bs->backing_file[len] = '\0';
735 /* Internal snapshots */
736 s->snapshots_offset = header.snapshots_offset;
737 s->nb_snapshots = header.nb_snapshots;
739 ret = qcow2_read_snapshots(bs);
740 if (ret < 0) {
741 error_setg_errno(errp, -ret, "Could not read snapshots");
742 goto fail;
745 /* Clear unknown autoclear feature bits */
746 if (!bs->read_only && !(flags & BDRV_O_INCOMING) && s->autoclear_features) {
747 s->autoclear_features = 0;
748 ret = qcow2_update_header(bs);
749 if (ret < 0) {
750 error_setg_errno(errp, -ret, "Could not update qcow2 header");
751 goto fail;
755 /* Initialise locks */
756 qemu_co_mutex_init(&s->lock);
758 /* Repair image if dirty */
759 if (!(flags & (BDRV_O_CHECK | BDRV_O_INCOMING)) && !bs->read_only &&
760 (s->incompatible_features & QCOW2_INCOMPAT_DIRTY)) {
761 BdrvCheckResult result = {0};
763 ret = qcow2_check(bs, &result, BDRV_FIX_ERRORS);
764 if (ret < 0) {
765 error_setg_errno(errp, -ret, "Could not repair dirty image");
766 goto fail;
770 /* Enable lazy_refcounts according to image and command line options */
771 opts = qemu_opts_create(&qcow2_runtime_opts, NULL, 0, &error_abort);
772 qemu_opts_absorb_qdict(opts, options, &local_err);
773 if (local_err) {
774 error_propagate(errp, local_err);
775 ret = -EINVAL;
776 goto fail;
779 s->use_lazy_refcounts = qemu_opt_get_bool(opts, QCOW2_OPT_LAZY_REFCOUNTS,
780 (s->compatible_features & QCOW2_COMPAT_LAZY_REFCOUNTS));
782 s->discard_passthrough[QCOW2_DISCARD_NEVER] = false;
783 s->discard_passthrough[QCOW2_DISCARD_ALWAYS] = true;
784 s->discard_passthrough[QCOW2_DISCARD_REQUEST] =
785 qemu_opt_get_bool(opts, QCOW2_OPT_DISCARD_REQUEST,
786 flags & BDRV_O_UNMAP);
787 s->discard_passthrough[QCOW2_DISCARD_SNAPSHOT] =
788 qemu_opt_get_bool(opts, QCOW2_OPT_DISCARD_SNAPSHOT, true);
789 s->discard_passthrough[QCOW2_DISCARD_OTHER] =
790 qemu_opt_get_bool(opts, QCOW2_OPT_DISCARD_OTHER, false);
792 opt_overlap_check = qemu_opt_get(opts, "overlap-check") ?: "cached";
793 if (!strcmp(opt_overlap_check, "none")) {
794 overlap_check_template = 0;
795 } else if (!strcmp(opt_overlap_check, "constant")) {
796 overlap_check_template = QCOW2_OL_CONSTANT;
797 } else if (!strcmp(opt_overlap_check, "cached")) {
798 overlap_check_template = QCOW2_OL_CACHED;
799 } else if (!strcmp(opt_overlap_check, "all")) {
800 overlap_check_template = QCOW2_OL_ALL;
801 } else {
802 error_setg(errp, "Unsupported value '%s' for qcow2 option "
803 "'overlap-check'. Allowed are either of the following: "
804 "none, constant, cached, all", opt_overlap_check);
805 qemu_opts_del(opts);
806 ret = -EINVAL;
807 goto fail;
810 s->overlap_check = 0;
811 for (i = 0; i < QCOW2_OL_MAX_BITNR; i++) {
812 /* overlap-check defines a template bitmask, but every flag may be
813 * overwritten through the associated boolean option */
814 s->overlap_check |=
815 qemu_opt_get_bool(opts, overlap_bool_option_names[i],
816 overlap_check_template & (1 << i)) << i;
819 qemu_opts_del(opts);
821 if (s->use_lazy_refcounts && s->qcow_version < 3) {
822 error_setg(errp, "Lazy refcounts require a qcow2 image with at least "
823 "qemu 1.1 compatibility level");
824 ret = -EINVAL;
825 goto fail;
828 #ifdef DEBUG_ALLOC
830 BdrvCheckResult result = {0};
831 qcow2_check_refcounts(bs, &result, 0);
833 #endif
834 return ret;
836 fail:
837 g_free(s->unknown_header_fields);
838 cleanup_unknown_header_ext(bs);
839 qcow2_free_snapshots(bs);
840 qcow2_refcount_close(bs);
841 g_free(s->l1_table);
842 /* else pre-write overlap checks in cache_destroy may crash */
843 s->l1_table = NULL;
844 if (s->l2_table_cache) {
845 qcow2_cache_destroy(bs, s->l2_table_cache);
847 if (s->refcount_block_cache) {
848 qcow2_cache_destroy(bs, s->refcount_block_cache);
850 g_free(s->cluster_cache);
851 qemu_vfree(s->cluster_data);
852 return ret;
855 static int qcow2_refresh_limits(BlockDriverState *bs)
857 BDRVQcowState *s = bs->opaque;
859 bs->bl.write_zeroes_alignment = s->cluster_sectors;
861 return 0;
864 static int qcow2_set_key(BlockDriverState *bs, const char *key)
866 BDRVQcowState *s = bs->opaque;
867 uint8_t keybuf[16];
868 int len, i;
870 memset(keybuf, 0, 16);
871 len = strlen(key);
872 if (len > 16)
873 len = 16;
874 /* XXX: we could compress the chars to 7 bits to increase
875 entropy */
876 for(i = 0;i < len;i++) {
877 keybuf[i] = key[i];
879 s->crypt_method = s->crypt_method_header;
881 if (AES_set_encrypt_key(keybuf, 128, &s->aes_encrypt_key) != 0)
882 return -1;
883 if (AES_set_decrypt_key(keybuf, 128, &s->aes_decrypt_key) != 0)
884 return -1;
885 #if 0
886 /* test */
888 uint8_t in[16];
889 uint8_t out[16];
890 uint8_t tmp[16];
891 for(i=0;i<16;i++)
892 in[i] = i;
893 AES_encrypt(in, tmp, &s->aes_encrypt_key);
894 AES_decrypt(tmp, out, &s->aes_decrypt_key);
895 for(i = 0; i < 16; i++)
896 printf(" %02x", tmp[i]);
897 printf("\n");
898 for(i = 0; i < 16; i++)
899 printf(" %02x", out[i]);
900 printf("\n");
902 #endif
903 return 0;
906 /* We have no actual commit/abort logic for qcow2, but we need to write out any
907 * unwritten data if we reopen read-only. */
908 static int qcow2_reopen_prepare(BDRVReopenState *state,
909 BlockReopenQueue *queue, Error **errp)
911 int ret;
913 if ((state->flags & BDRV_O_RDWR) == 0) {
914 ret = bdrv_flush(state->bs);
915 if (ret < 0) {
916 return ret;
919 ret = qcow2_mark_clean(state->bs);
920 if (ret < 0) {
921 return ret;
925 return 0;
928 static int64_t coroutine_fn qcow2_co_get_block_status(BlockDriverState *bs,
929 int64_t sector_num, int nb_sectors, int *pnum)
931 BDRVQcowState *s = bs->opaque;
932 uint64_t cluster_offset;
933 int index_in_cluster, ret;
934 int64_t status = 0;
936 *pnum = nb_sectors;
937 qemu_co_mutex_lock(&s->lock);
938 ret = qcow2_get_cluster_offset(bs, sector_num << 9, pnum, &cluster_offset);
939 qemu_co_mutex_unlock(&s->lock);
940 if (ret < 0) {
941 return ret;
944 if (cluster_offset != 0 && ret != QCOW2_CLUSTER_COMPRESSED &&
945 !s->crypt_method) {
946 index_in_cluster = sector_num & (s->cluster_sectors - 1);
947 cluster_offset |= (index_in_cluster << BDRV_SECTOR_BITS);
948 status |= BDRV_BLOCK_OFFSET_VALID | cluster_offset;
950 if (ret == QCOW2_CLUSTER_ZERO) {
951 status |= BDRV_BLOCK_ZERO;
952 } else if (ret != QCOW2_CLUSTER_UNALLOCATED) {
953 status |= BDRV_BLOCK_DATA;
955 return status;
958 /* handle reading after the end of the backing file */
959 int qcow2_backing_read1(BlockDriverState *bs, QEMUIOVector *qiov,
960 int64_t sector_num, int nb_sectors)
962 int n1;
963 if ((sector_num + nb_sectors) <= bs->total_sectors)
964 return nb_sectors;
965 if (sector_num >= bs->total_sectors)
966 n1 = 0;
967 else
968 n1 = bs->total_sectors - sector_num;
970 qemu_iovec_memset(qiov, 512 * n1, 0, 512 * (nb_sectors - n1));
972 return n1;
975 static coroutine_fn int qcow2_co_readv(BlockDriverState *bs, int64_t sector_num,
976 int remaining_sectors, QEMUIOVector *qiov)
978 BDRVQcowState *s = bs->opaque;
979 int index_in_cluster, n1;
980 int ret;
981 int cur_nr_sectors; /* number of sectors in current iteration */
982 uint64_t cluster_offset = 0;
983 uint64_t bytes_done = 0;
984 QEMUIOVector hd_qiov;
985 uint8_t *cluster_data = NULL;
987 qemu_iovec_init(&hd_qiov, qiov->niov);
989 qemu_co_mutex_lock(&s->lock);
991 while (remaining_sectors != 0) {
993 /* prepare next request */
994 cur_nr_sectors = remaining_sectors;
995 if (s->crypt_method) {
996 cur_nr_sectors = MIN(cur_nr_sectors,
997 QCOW_MAX_CRYPT_CLUSTERS * s->cluster_sectors);
1000 ret = qcow2_get_cluster_offset(bs, sector_num << 9,
1001 &cur_nr_sectors, &cluster_offset);
1002 if (ret < 0) {
1003 goto fail;
1006 index_in_cluster = sector_num & (s->cluster_sectors - 1);
1008 qemu_iovec_reset(&hd_qiov);
1009 qemu_iovec_concat(&hd_qiov, qiov, bytes_done,
1010 cur_nr_sectors * 512);
1012 switch (ret) {
1013 case QCOW2_CLUSTER_UNALLOCATED:
1015 if (bs->backing_hd) {
1016 /* read from the base image */
1017 n1 = qcow2_backing_read1(bs->backing_hd, &hd_qiov,
1018 sector_num, cur_nr_sectors);
1019 if (n1 > 0) {
1020 BLKDBG_EVENT(bs->file, BLKDBG_READ_BACKING_AIO);
1021 qemu_co_mutex_unlock(&s->lock);
1022 ret = bdrv_co_readv(bs->backing_hd, sector_num,
1023 n1, &hd_qiov);
1024 qemu_co_mutex_lock(&s->lock);
1025 if (ret < 0) {
1026 goto fail;
1029 } else {
1030 /* Note: in this case, no need to wait */
1031 qemu_iovec_memset(&hd_qiov, 0, 0, 512 * cur_nr_sectors);
1033 break;
1035 case QCOW2_CLUSTER_ZERO:
1036 qemu_iovec_memset(&hd_qiov, 0, 0, 512 * cur_nr_sectors);
1037 break;
1039 case QCOW2_CLUSTER_COMPRESSED:
1040 /* add AIO support for compressed blocks ? */
1041 ret = qcow2_decompress_cluster(bs, cluster_offset);
1042 if (ret < 0) {
1043 goto fail;
1046 qemu_iovec_from_buf(&hd_qiov, 0,
1047 s->cluster_cache + index_in_cluster * 512,
1048 512 * cur_nr_sectors);
1049 break;
1051 case QCOW2_CLUSTER_NORMAL:
1052 if ((cluster_offset & 511) != 0) {
1053 ret = -EIO;
1054 goto fail;
1057 if (s->crypt_method) {
1059 * For encrypted images, read everything into a temporary
1060 * contiguous buffer on which the AES functions can work.
1062 if (!cluster_data) {
1063 cluster_data =
1064 qemu_blockalign(bs, QCOW_MAX_CRYPT_CLUSTERS * s->cluster_size);
1067 assert(cur_nr_sectors <=
1068 QCOW_MAX_CRYPT_CLUSTERS * s->cluster_sectors);
1069 qemu_iovec_reset(&hd_qiov);
1070 qemu_iovec_add(&hd_qiov, cluster_data,
1071 512 * cur_nr_sectors);
1074 BLKDBG_EVENT(bs->file, BLKDBG_READ_AIO);
1075 qemu_co_mutex_unlock(&s->lock);
1076 ret = bdrv_co_readv(bs->file,
1077 (cluster_offset >> 9) + index_in_cluster,
1078 cur_nr_sectors, &hd_qiov);
1079 qemu_co_mutex_lock(&s->lock);
1080 if (ret < 0) {
1081 goto fail;
1083 if (s->crypt_method) {
1084 qcow2_encrypt_sectors(s, sector_num, cluster_data,
1085 cluster_data, cur_nr_sectors, 0, &s->aes_decrypt_key);
1086 qemu_iovec_from_buf(qiov, bytes_done,
1087 cluster_data, 512 * cur_nr_sectors);
1089 break;
1091 default:
1092 g_assert_not_reached();
1093 ret = -EIO;
1094 goto fail;
1097 remaining_sectors -= cur_nr_sectors;
1098 sector_num += cur_nr_sectors;
1099 bytes_done += cur_nr_sectors * 512;
1101 ret = 0;
1103 fail:
1104 qemu_co_mutex_unlock(&s->lock);
1106 qemu_iovec_destroy(&hd_qiov);
1107 qemu_vfree(cluster_data);
1109 return ret;
1112 static coroutine_fn int qcow2_co_writev(BlockDriverState *bs,
1113 int64_t sector_num,
1114 int remaining_sectors,
1115 QEMUIOVector *qiov)
1117 BDRVQcowState *s = bs->opaque;
1118 int index_in_cluster;
1119 int ret;
1120 int cur_nr_sectors; /* number of sectors in current iteration */
1121 uint64_t cluster_offset;
1122 QEMUIOVector hd_qiov;
1123 uint64_t bytes_done = 0;
1124 uint8_t *cluster_data = NULL;
1125 QCowL2Meta *l2meta = NULL;
1127 trace_qcow2_writev_start_req(qemu_coroutine_self(), sector_num,
1128 remaining_sectors);
1130 qemu_iovec_init(&hd_qiov, qiov->niov);
1132 s->cluster_cache_offset = -1; /* disable compressed cache */
1134 qemu_co_mutex_lock(&s->lock);
1136 while (remaining_sectors != 0) {
1138 l2meta = NULL;
1140 trace_qcow2_writev_start_part(qemu_coroutine_self());
1141 index_in_cluster = sector_num & (s->cluster_sectors - 1);
1142 cur_nr_sectors = remaining_sectors;
1143 if (s->crypt_method &&
1144 cur_nr_sectors >
1145 QCOW_MAX_CRYPT_CLUSTERS * s->cluster_sectors - index_in_cluster) {
1146 cur_nr_sectors =
1147 QCOW_MAX_CRYPT_CLUSTERS * s->cluster_sectors - index_in_cluster;
1150 ret = qcow2_alloc_cluster_offset(bs, sector_num << 9,
1151 &cur_nr_sectors, &cluster_offset, &l2meta);
1152 if (ret < 0) {
1153 goto fail;
1156 assert((cluster_offset & 511) == 0);
1158 qemu_iovec_reset(&hd_qiov);
1159 qemu_iovec_concat(&hd_qiov, qiov, bytes_done,
1160 cur_nr_sectors * 512);
1162 if (s->crypt_method) {
1163 if (!cluster_data) {
1164 cluster_data = qemu_blockalign(bs, QCOW_MAX_CRYPT_CLUSTERS *
1165 s->cluster_size);
1168 assert(hd_qiov.size <=
1169 QCOW_MAX_CRYPT_CLUSTERS * s->cluster_size);
1170 qemu_iovec_to_buf(&hd_qiov, 0, cluster_data, hd_qiov.size);
1172 qcow2_encrypt_sectors(s, sector_num, cluster_data,
1173 cluster_data, cur_nr_sectors, 1, &s->aes_encrypt_key);
1175 qemu_iovec_reset(&hd_qiov);
1176 qemu_iovec_add(&hd_qiov, cluster_data,
1177 cur_nr_sectors * 512);
1180 ret = qcow2_pre_write_overlap_check(bs, 0,
1181 cluster_offset + index_in_cluster * BDRV_SECTOR_SIZE,
1182 cur_nr_sectors * BDRV_SECTOR_SIZE);
1183 if (ret < 0) {
1184 goto fail;
1187 qemu_co_mutex_unlock(&s->lock);
1188 BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
1189 trace_qcow2_writev_data(qemu_coroutine_self(),
1190 (cluster_offset >> 9) + index_in_cluster);
1191 ret = bdrv_co_writev(bs->file,
1192 (cluster_offset >> 9) + index_in_cluster,
1193 cur_nr_sectors, &hd_qiov);
1194 qemu_co_mutex_lock(&s->lock);
1195 if (ret < 0) {
1196 goto fail;
1199 while (l2meta != NULL) {
1200 QCowL2Meta *next;
1202 ret = qcow2_alloc_cluster_link_l2(bs, l2meta);
1203 if (ret < 0) {
1204 goto fail;
1207 /* Take the request off the list of running requests */
1208 if (l2meta->nb_clusters != 0) {
1209 QLIST_REMOVE(l2meta, next_in_flight);
1212 qemu_co_queue_restart_all(&l2meta->dependent_requests);
1214 next = l2meta->next;
1215 g_free(l2meta);
1216 l2meta = next;
1219 remaining_sectors -= cur_nr_sectors;
1220 sector_num += cur_nr_sectors;
1221 bytes_done += cur_nr_sectors * 512;
1222 trace_qcow2_writev_done_part(qemu_coroutine_self(), cur_nr_sectors);
1224 ret = 0;
1226 fail:
1227 qemu_co_mutex_unlock(&s->lock);
1229 while (l2meta != NULL) {
1230 QCowL2Meta *next;
1232 if (l2meta->nb_clusters != 0) {
1233 QLIST_REMOVE(l2meta, next_in_flight);
1235 qemu_co_queue_restart_all(&l2meta->dependent_requests);
1237 next = l2meta->next;
1238 g_free(l2meta);
1239 l2meta = next;
1242 qemu_iovec_destroy(&hd_qiov);
1243 qemu_vfree(cluster_data);
1244 trace_qcow2_writev_done_req(qemu_coroutine_self(), ret);
1246 return ret;
1249 static void qcow2_close(BlockDriverState *bs)
1251 BDRVQcowState *s = bs->opaque;
1252 g_free(s->l1_table);
1253 /* else pre-write overlap checks in cache_destroy may crash */
1254 s->l1_table = NULL;
1256 if (!(bs->open_flags & BDRV_O_INCOMING)) {
1257 qcow2_cache_flush(bs, s->l2_table_cache);
1258 qcow2_cache_flush(bs, s->refcount_block_cache);
1260 qcow2_mark_clean(bs);
1263 qcow2_cache_destroy(bs, s->l2_table_cache);
1264 qcow2_cache_destroy(bs, s->refcount_block_cache);
1266 g_free(s->unknown_header_fields);
1267 cleanup_unknown_header_ext(bs);
1269 g_free(s->cluster_cache);
1270 qemu_vfree(s->cluster_data);
1271 qcow2_refcount_close(bs);
1272 qcow2_free_snapshots(bs);
1275 static void qcow2_invalidate_cache(BlockDriverState *bs, Error **errp)
1277 BDRVQcowState *s = bs->opaque;
1278 int flags = s->flags;
1279 AES_KEY aes_encrypt_key;
1280 AES_KEY aes_decrypt_key;
1281 uint32_t crypt_method = 0;
1282 QDict *options;
1283 Error *local_err = NULL;
1284 int ret;
1287 * Backing files are read-only which makes all of their metadata immutable,
1288 * that means we don't have to worry about reopening them here.
1291 if (s->crypt_method) {
1292 crypt_method = s->crypt_method;
1293 memcpy(&aes_encrypt_key, &s->aes_encrypt_key, sizeof(aes_encrypt_key));
1294 memcpy(&aes_decrypt_key, &s->aes_decrypt_key, sizeof(aes_decrypt_key));
1297 qcow2_close(bs);
1299 bdrv_invalidate_cache(bs->file, &local_err);
1300 if (local_err) {
1301 error_propagate(errp, local_err);
1302 return;
1305 memset(s, 0, sizeof(BDRVQcowState));
1306 options = qdict_clone_shallow(bs->options);
1308 ret = qcow2_open(bs, options, flags, &local_err);
1309 if (local_err) {
1310 error_setg(errp, "Could not reopen qcow2 layer: %s",
1311 error_get_pretty(local_err));
1312 error_free(local_err);
1313 return;
1314 } else if (ret < 0) {
1315 error_setg_errno(errp, -ret, "Could not reopen qcow2 layer");
1316 return;
1319 QDECREF(options);
1321 if (crypt_method) {
1322 s->crypt_method = crypt_method;
1323 memcpy(&s->aes_encrypt_key, &aes_encrypt_key, sizeof(aes_encrypt_key));
1324 memcpy(&s->aes_decrypt_key, &aes_decrypt_key, sizeof(aes_decrypt_key));
1328 static size_t header_ext_add(char *buf, uint32_t magic, const void *s,
1329 size_t len, size_t buflen)
1331 QCowExtension *ext_backing_fmt = (QCowExtension*) buf;
1332 size_t ext_len = sizeof(QCowExtension) + ((len + 7) & ~7);
1334 if (buflen < ext_len) {
1335 return -ENOSPC;
1338 *ext_backing_fmt = (QCowExtension) {
1339 .magic = cpu_to_be32(magic),
1340 .len = cpu_to_be32(len),
1342 memcpy(buf + sizeof(QCowExtension), s, len);
1344 return ext_len;
1348 * Updates the qcow2 header, including the variable length parts of it, i.e.
1349 * the backing file name and all extensions. qcow2 was not designed to allow
1350 * such changes, so if we run out of space (we can only use the first cluster)
1351 * this function may fail.
1353 * Returns 0 on success, -errno in error cases.
1355 int qcow2_update_header(BlockDriverState *bs)
1357 BDRVQcowState *s = bs->opaque;
1358 QCowHeader *header;
1359 char *buf;
1360 size_t buflen = s->cluster_size;
1361 int ret;
1362 uint64_t total_size;
1363 uint32_t refcount_table_clusters;
1364 size_t header_length;
1365 Qcow2UnknownHeaderExtension *uext;
1367 buf = qemu_blockalign(bs, buflen);
1369 /* Header structure */
1370 header = (QCowHeader*) buf;
1372 if (buflen < sizeof(*header)) {
1373 ret = -ENOSPC;
1374 goto fail;
1377 header_length = sizeof(*header) + s->unknown_header_fields_size;
1378 total_size = bs->total_sectors * BDRV_SECTOR_SIZE;
1379 refcount_table_clusters = s->refcount_table_size >> (s->cluster_bits - 3);
1381 *header = (QCowHeader) {
1382 /* Version 2 fields */
1383 .magic = cpu_to_be32(QCOW_MAGIC),
1384 .version = cpu_to_be32(s->qcow_version),
1385 .backing_file_offset = 0,
1386 .backing_file_size = 0,
1387 .cluster_bits = cpu_to_be32(s->cluster_bits),
1388 .size = cpu_to_be64(total_size),
1389 .crypt_method = cpu_to_be32(s->crypt_method_header),
1390 .l1_size = cpu_to_be32(s->l1_size),
1391 .l1_table_offset = cpu_to_be64(s->l1_table_offset),
1392 .refcount_table_offset = cpu_to_be64(s->refcount_table_offset),
1393 .refcount_table_clusters = cpu_to_be32(refcount_table_clusters),
1394 .nb_snapshots = cpu_to_be32(s->nb_snapshots),
1395 .snapshots_offset = cpu_to_be64(s->snapshots_offset),
1397 /* Version 3 fields */
1398 .incompatible_features = cpu_to_be64(s->incompatible_features),
1399 .compatible_features = cpu_to_be64(s->compatible_features),
1400 .autoclear_features = cpu_to_be64(s->autoclear_features),
1401 .refcount_order = cpu_to_be32(s->refcount_order),
1402 .header_length = cpu_to_be32(header_length),
1405 /* For older versions, write a shorter header */
1406 switch (s->qcow_version) {
1407 case 2:
1408 ret = offsetof(QCowHeader, incompatible_features);
1409 break;
1410 case 3:
1411 ret = sizeof(*header);
1412 break;
1413 default:
1414 ret = -EINVAL;
1415 goto fail;
1418 buf += ret;
1419 buflen -= ret;
1420 memset(buf, 0, buflen);
1422 /* Preserve any unknown field in the header */
1423 if (s->unknown_header_fields_size) {
1424 if (buflen < s->unknown_header_fields_size) {
1425 ret = -ENOSPC;
1426 goto fail;
1429 memcpy(buf, s->unknown_header_fields, s->unknown_header_fields_size);
1430 buf += s->unknown_header_fields_size;
1431 buflen -= s->unknown_header_fields_size;
1434 /* Backing file format header extension */
1435 if (*bs->backing_format) {
1436 ret = header_ext_add(buf, QCOW2_EXT_MAGIC_BACKING_FORMAT,
1437 bs->backing_format, strlen(bs->backing_format),
1438 buflen);
1439 if (ret < 0) {
1440 goto fail;
1443 buf += ret;
1444 buflen -= ret;
1447 /* Feature table */
1448 Qcow2Feature features[] = {
1450 .type = QCOW2_FEAT_TYPE_INCOMPATIBLE,
1451 .bit = QCOW2_INCOMPAT_DIRTY_BITNR,
1452 .name = "dirty bit",
1455 .type = QCOW2_FEAT_TYPE_INCOMPATIBLE,
1456 .bit = QCOW2_INCOMPAT_CORRUPT_BITNR,
1457 .name = "corrupt bit",
1460 .type = QCOW2_FEAT_TYPE_COMPATIBLE,
1461 .bit = QCOW2_COMPAT_LAZY_REFCOUNTS_BITNR,
1462 .name = "lazy refcounts",
1466 ret = header_ext_add(buf, QCOW2_EXT_MAGIC_FEATURE_TABLE,
1467 features, sizeof(features), buflen);
1468 if (ret < 0) {
1469 goto fail;
1471 buf += ret;
1472 buflen -= ret;
1474 /* Keep unknown header extensions */
1475 QLIST_FOREACH(uext, &s->unknown_header_ext, next) {
1476 ret = header_ext_add(buf, uext->magic, uext->data, uext->len, buflen);
1477 if (ret < 0) {
1478 goto fail;
1481 buf += ret;
1482 buflen -= ret;
1485 /* End of header extensions */
1486 ret = header_ext_add(buf, QCOW2_EXT_MAGIC_END, NULL, 0, buflen);
1487 if (ret < 0) {
1488 goto fail;
1491 buf += ret;
1492 buflen -= ret;
1494 /* Backing file name */
1495 if (*bs->backing_file) {
1496 size_t backing_file_len = strlen(bs->backing_file);
1498 if (buflen < backing_file_len) {
1499 ret = -ENOSPC;
1500 goto fail;
1503 /* Using strncpy is ok here, since buf is not NUL-terminated. */
1504 strncpy(buf, bs->backing_file, buflen);
1506 header->backing_file_offset = cpu_to_be64(buf - ((char*) header));
1507 header->backing_file_size = cpu_to_be32(backing_file_len);
1510 /* Write the new header */
1511 ret = bdrv_pwrite(bs->file, 0, header, s->cluster_size);
1512 if (ret < 0) {
1513 goto fail;
1516 ret = 0;
1517 fail:
1518 qemu_vfree(header);
1519 return ret;
1522 static int qcow2_change_backing_file(BlockDriverState *bs,
1523 const char *backing_file, const char *backing_fmt)
1525 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
1526 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
1528 return qcow2_update_header(bs);
1531 static int preallocate(BlockDriverState *bs)
1533 uint64_t nb_sectors;
1534 uint64_t offset;
1535 uint64_t host_offset = 0;
1536 int num;
1537 int ret;
1538 QCowL2Meta *meta;
1540 nb_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
1541 offset = 0;
1543 while (nb_sectors) {
1544 num = MIN(nb_sectors, INT_MAX >> BDRV_SECTOR_BITS);
1545 ret = qcow2_alloc_cluster_offset(bs, offset, &num,
1546 &host_offset, &meta);
1547 if (ret < 0) {
1548 return ret;
1551 while (meta) {
1552 QCowL2Meta *next = meta->next;
1554 ret = qcow2_alloc_cluster_link_l2(bs, meta);
1555 if (ret < 0) {
1556 qcow2_free_any_clusters(bs, meta->alloc_offset,
1557 meta->nb_clusters, QCOW2_DISCARD_NEVER);
1558 return ret;
1561 /* There are no dependent requests, but we need to remove our
1562 * request from the list of in-flight requests */
1563 QLIST_REMOVE(meta, next_in_flight);
1565 g_free(meta);
1566 meta = next;
1569 /* TODO Preallocate data if requested */
1571 nb_sectors -= num;
1572 offset += num << BDRV_SECTOR_BITS;
1576 * It is expected that the image file is large enough to actually contain
1577 * all of the allocated clusters (otherwise we get failing reads after
1578 * EOF). Extend the image to the last allocated sector.
1580 if (host_offset != 0) {
1581 uint8_t buf[BDRV_SECTOR_SIZE];
1582 memset(buf, 0, BDRV_SECTOR_SIZE);
1583 ret = bdrv_write(bs->file, (host_offset >> BDRV_SECTOR_BITS) + num - 1,
1584 buf, 1);
1585 if (ret < 0) {
1586 return ret;
1590 return 0;
1593 static int qcow2_create2(const char *filename, int64_t total_size,
1594 const char *backing_file, const char *backing_format,
1595 int flags, size_t cluster_size, int prealloc,
1596 QEMUOptionParameter *options, int version,
1597 Error **errp)
1599 /* Calculate cluster_bits */
1600 int cluster_bits;
1601 cluster_bits = ffs(cluster_size) - 1;
1602 if (cluster_bits < MIN_CLUSTER_BITS || cluster_bits > MAX_CLUSTER_BITS ||
1603 (1 << cluster_bits) != cluster_size)
1605 error_setg(errp, "Cluster size must be a power of two between %d and "
1606 "%dk", 1 << MIN_CLUSTER_BITS, 1 << (MAX_CLUSTER_BITS - 10));
1607 return -EINVAL;
1611 * Open the image file and write a minimal qcow2 header.
1613 * We keep things simple and start with a zero-sized image. We also
1614 * do without refcount blocks or a L1 table for now. We'll fix the
1615 * inconsistency later.
1617 * We do need a refcount table because growing the refcount table means
1618 * allocating two new refcount blocks - the seconds of which would be at
1619 * 2 GB for 64k clusters, and we don't want to have a 2 GB initial file
1620 * size for any qcow2 image.
1622 BlockDriverState* bs;
1623 QCowHeader *header;
1624 uint64_t* refcount_table;
1625 Error *local_err = NULL;
1626 int ret;
1628 ret = bdrv_create_file(filename, options, &local_err);
1629 if (ret < 0) {
1630 error_propagate(errp, local_err);
1631 return ret;
1634 bs = NULL;
1635 ret = bdrv_open(&bs, filename, NULL, NULL, BDRV_O_RDWR | BDRV_O_PROTOCOL,
1636 NULL, &local_err);
1637 if (ret < 0) {
1638 error_propagate(errp, local_err);
1639 return ret;
1642 /* Write the header */
1643 QEMU_BUILD_BUG_ON((1 << MIN_CLUSTER_BITS) < sizeof(*header));
1644 header = g_malloc0(cluster_size);
1645 *header = (QCowHeader) {
1646 .magic = cpu_to_be32(QCOW_MAGIC),
1647 .version = cpu_to_be32(version),
1648 .cluster_bits = cpu_to_be32(cluster_bits),
1649 .size = cpu_to_be64(0),
1650 .l1_table_offset = cpu_to_be64(0),
1651 .l1_size = cpu_to_be32(0),
1652 .refcount_table_offset = cpu_to_be64(cluster_size),
1653 .refcount_table_clusters = cpu_to_be32(1),
1654 .refcount_order = cpu_to_be32(3 + REFCOUNT_SHIFT),
1655 .header_length = cpu_to_be32(sizeof(*header)),
1658 if (flags & BLOCK_FLAG_ENCRYPT) {
1659 header->crypt_method = cpu_to_be32(QCOW_CRYPT_AES);
1660 } else {
1661 header->crypt_method = cpu_to_be32(QCOW_CRYPT_NONE);
1664 if (flags & BLOCK_FLAG_LAZY_REFCOUNTS) {
1665 header->compatible_features |=
1666 cpu_to_be64(QCOW2_COMPAT_LAZY_REFCOUNTS);
1669 ret = bdrv_pwrite(bs, 0, header, cluster_size);
1670 g_free(header);
1671 if (ret < 0) {
1672 error_setg_errno(errp, -ret, "Could not write qcow2 header");
1673 goto out;
1676 /* Write a refcount table with one refcount block */
1677 refcount_table = g_malloc0(2 * cluster_size);
1678 refcount_table[0] = cpu_to_be64(2 * cluster_size);
1679 ret = bdrv_pwrite(bs, cluster_size, refcount_table, 2 * cluster_size);
1680 g_free(refcount_table);
1682 if (ret < 0) {
1683 error_setg_errno(errp, -ret, "Could not write refcount table");
1684 goto out;
1687 bdrv_unref(bs);
1688 bs = NULL;
1691 * And now open the image and make it consistent first (i.e. increase the
1692 * refcount of the cluster that is occupied by the header and the refcount
1693 * table)
1695 BlockDriver* drv = bdrv_find_format("qcow2");
1696 assert(drv != NULL);
1697 ret = bdrv_open(&bs, filename, NULL, NULL,
1698 BDRV_O_RDWR | BDRV_O_CACHE_WB | BDRV_O_NO_FLUSH, drv, &local_err);
1699 if (ret < 0) {
1700 error_propagate(errp, local_err);
1701 goto out;
1704 ret = qcow2_alloc_clusters(bs, 3 * cluster_size);
1705 if (ret < 0) {
1706 error_setg_errno(errp, -ret, "Could not allocate clusters for qcow2 "
1707 "header and refcount table");
1708 goto out;
1710 } else if (ret != 0) {
1711 error_report("Huh, first cluster in empty image is already in use?");
1712 abort();
1715 /* Okay, now that we have a valid image, let's give it the right size */
1716 ret = bdrv_truncate(bs, total_size * BDRV_SECTOR_SIZE);
1717 if (ret < 0) {
1718 error_setg_errno(errp, -ret, "Could not resize image");
1719 goto out;
1722 /* Want a backing file? There you go.*/
1723 if (backing_file) {
1724 ret = bdrv_change_backing_file(bs, backing_file, backing_format);
1725 if (ret < 0) {
1726 error_setg_errno(errp, -ret, "Could not assign backing file '%s' "
1727 "with format '%s'", backing_file, backing_format);
1728 goto out;
1732 /* And if we're supposed to preallocate metadata, do that now */
1733 if (prealloc) {
1734 BDRVQcowState *s = bs->opaque;
1735 qemu_co_mutex_lock(&s->lock);
1736 ret = preallocate(bs);
1737 qemu_co_mutex_unlock(&s->lock);
1738 if (ret < 0) {
1739 error_setg_errno(errp, -ret, "Could not preallocate metadata");
1740 goto out;
1744 bdrv_unref(bs);
1745 bs = NULL;
1747 /* Reopen the image without BDRV_O_NO_FLUSH to flush it before returning */
1748 ret = bdrv_open(&bs, filename, NULL, NULL,
1749 BDRV_O_RDWR | BDRV_O_CACHE_WB | BDRV_O_NO_BACKING,
1750 drv, &local_err);
1751 if (local_err) {
1752 error_propagate(errp, local_err);
1753 goto out;
1756 ret = 0;
1757 out:
1758 if (bs) {
1759 bdrv_unref(bs);
1761 return ret;
1764 static int qcow2_create(const char *filename, QEMUOptionParameter *options,
1765 Error **errp)
1767 const char *backing_file = NULL;
1768 const char *backing_fmt = NULL;
1769 uint64_t sectors = 0;
1770 int flags = 0;
1771 size_t cluster_size = DEFAULT_CLUSTER_SIZE;
1772 int prealloc = 0;
1773 int version = 3;
1774 Error *local_err = NULL;
1775 int ret;
1777 /* Read out options */
1778 while (options && options->name) {
1779 if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
1780 sectors = options->value.n / 512;
1781 } else if (!strcmp(options->name, BLOCK_OPT_BACKING_FILE)) {
1782 backing_file = options->value.s;
1783 } else if (!strcmp(options->name, BLOCK_OPT_BACKING_FMT)) {
1784 backing_fmt = options->value.s;
1785 } else if (!strcmp(options->name, BLOCK_OPT_ENCRYPT)) {
1786 flags |= options->value.n ? BLOCK_FLAG_ENCRYPT : 0;
1787 } else if (!strcmp(options->name, BLOCK_OPT_CLUSTER_SIZE)) {
1788 if (options->value.n) {
1789 cluster_size = options->value.n;
1791 } else if (!strcmp(options->name, BLOCK_OPT_PREALLOC)) {
1792 if (!options->value.s || !strcmp(options->value.s, "off")) {
1793 prealloc = 0;
1794 } else if (!strcmp(options->value.s, "metadata")) {
1795 prealloc = 1;
1796 } else {
1797 error_setg(errp, "Invalid preallocation mode: '%s'",
1798 options->value.s);
1799 return -EINVAL;
1801 } else if (!strcmp(options->name, BLOCK_OPT_COMPAT_LEVEL)) {
1802 if (!options->value.s) {
1803 /* keep the default */
1804 } else if (!strcmp(options->value.s, "0.10")) {
1805 version = 2;
1806 } else if (!strcmp(options->value.s, "1.1")) {
1807 version = 3;
1808 } else {
1809 error_setg(errp, "Invalid compatibility level: '%s'",
1810 options->value.s);
1811 return -EINVAL;
1813 } else if (!strcmp(options->name, BLOCK_OPT_LAZY_REFCOUNTS)) {
1814 flags |= options->value.n ? BLOCK_FLAG_LAZY_REFCOUNTS : 0;
1816 options++;
1819 if (backing_file && prealloc) {
1820 error_setg(errp, "Backing file and preallocation cannot be used at "
1821 "the same time");
1822 return -EINVAL;
1825 if (version < 3 && (flags & BLOCK_FLAG_LAZY_REFCOUNTS)) {
1826 error_setg(errp, "Lazy refcounts only supported with compatibility "
1827 "level 1.1 and above (use compat=1.1 or greater)");
1828 return -EINVAL;
1831 ret = qcow2_create2(filename, sectors, backing_file, backing_fmt, flags,
1832 cluster_size, prealloc, options, version, &local_err);
1833 if (local_err) {
1834 error_propagate(errp, local_err);
1836 return ret;
1839 static coroutine_fn int qcow2_co_write_zeroes(BlockDriverState *bs,
1840 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
1842 int ret;
1843 BDRVQcowState *s = bs->opaque;
1845 /* Emulate misaligned zero writes */
1846 if (sector_num % s->cluster_sectors || nb_sectors % s->cluster_sectors) {
1847 return -ENOTSUP;
1850 /* Whatever is left can use real zero clusters */
1851 qemu_co_mutex_lock(&s->lock);
1852 ret = qcow2_zero_clusters(bs, sector_num << BDRV_SECTOR_BITS,
1853 nb_sectors);
1854 qemu_co_mutex_unlock(&s->lock);
1856 return ret;
1859 static coroutine_fn int qcow2_co_discard(BlockDriverState *bs,
1860 int64_t sector_num, int nb_sectors)
1862 int ret;
1863 BDRVQcowState *s = bs->opaque;
1865 qemu_co_mutex_lock(&s->lock);
1866 ret = qcow2_discard_clusters(bs, sector_num << BDRV_SECTOR_BITS,
1867 nb_sectors, QCOW2_DISCARD_REQUEST);
1868 qemu_co_mutex_unlock(&s->lock);
1869 return ret;
1872 static int qcow2_truncate(BlockDriverState *bs, int64_t offset)
1874 BDRVQcowState *s = bs->opaque;
1875 int64_t new_l1_size;
1876 int ret;
1878 if (offset & 511) {
1879 error_report("The new size must be a multiple of 512");
1880 return -EINVAL;
1883 /* cannot proceed if image has snapshots */
1884 if (s->nb_snapshots) {
1885 error_report("Can't resize an image which has snapshots");
1886 return -ENOTSUP;
1889 /* shrinking is currently not supported */
1890 if (offset < bs->total_sectors * 512) {
1891 error_report("qcow2 doesn't support shrinking images yet");
1892 return -ENOTSUP;
1895 new_l1_size = size_to_l1(s, offset);
1896 ret = qcow2_grow_l1_table(bs, new_l1_size, true);
1897 if (ret < 0) {
1898 return ret;
1901 /* write updated header.size */
1902 offset = cpu_to_be64(offset);
1903 ret = bdrv_pwrite_sync(bs->file, offsetof(QCowHeader, size),
1904 &offset, sizeof(uint64_t));
1905 if (ret < 0) {
1906 return ret;
1909 s->l1_vm_state_index = new_l1_size;
1910 return 0;
1913 /* XXX: put compressed sectors first, then all the cluster aligned
1914 tables to avoid losing bytes in alignment */
1915 static int qcow2_write_compressed(BlockDriverState *bs, int64_t sector_num,
1916 const uint8_t *buf, int nb_sectors)
1918 BDRVQcowState *s = bs->opaque;
1919 z_stream strm;
1920 int ret, out_len;
1921 uint8_t *out_buf;
1922 uint64_t cluster_offset;
1924 if (nb_sectors == 0) {
1925 /* align end of file to a sector boundary to ease reading with
1926 sector based I/Os */
1927 cluster_offset = bdrv_getlength(bs->file);
1928 cluster_offset = (cluster_offset + 511) & ~511;
1929 bdrv_truncate(bs->file, cluster_offset);
1930 return 0;
1933 if (nb_sectors != s->cluster_sectors) {
1934 ret = -EINVAL;
1936 /* Zero-pad last write if image size is not cluster aligned */
1937 if (sector_num + nb_sectors == bs->total_sectors &&
1938 nb_sectors < s->cluster_sectors) {
1939 uint8_t *pad_buf = qemu_blockalign(bs, s->cluster_size);
1940 memset(pad_buf, 0, s->cluster_size);
1941 memcpy(pad_buf, buf, nb_sectors * BDRV_SECTOR_SIZE);
1942 ret = qcow2_write_compressed(bs, sector_num,
1943 pad_buf, s->cluster_sectors);
1944 qemu_vfree(pad_buf);
1946 return ret;
1949 out_buf = g_malloc(s->cluster_size + (s->cluster_size / 1000) + 128);
1951 /* best compression, small window, no zlib header */
1952 memset(&strm, 0, sizeof(strm));
1953 ret = deflateInit2(&strm, Z_DEFAULT_COMPRESSION,
1954 Z_DEFLATED, -12,
1955 9, Z_DEFAULT_STRATEGY);
1956 if (ret != 0) {
1957 ret = -EINVAL;
1958 goto fail;
1961 strm.avail_in = s->cluster_size;
1962 strm.next_in = (uint8_t *)buf;
1963 strm.avail_out = s->cluster_size;
1964 strm.next_out = out_buf;
1966 ret = deflate(&strm, Z_FINISH);
1967 if (ret != Z_STREAM_END && ret != Z_OK) {
1968 deflateEnd(&strm);
1969 ret = -EINVAL;
1970 goto fail;
1972 out_len = strm.next_out - out_buf;
1974 deflateEnd(&strm);
1976 if (ret != Z_STREAM_END || out_len >= s->cluster_size) {
1977 /* could not compress: write normal cluster */
1978 ret = bdrv_write(bs, sector_num, buf, s->cluster_sectors);
1979 if (ret < 0) {
1980 goto fail;
1982 } else {
1983 cluster_offset = qcow2_alloc_compressed_cluster_offset(bs,
1984 sector_num << 9, out_len);
1985 if (!cluster_offset) {
1986 ret = -EIO;
1987 goto fail;
1989 cluster_offset &= s->cluster_offset_mask;
1991 ret = qcow2_pre_write_overlap_check(bs, 0, cluster_offset, out_len);
1992 if (ret < 0) {
1993 goto fail;
1996 BLKDBG_EVENT(bs->file, BLKDBG_WRITE_COMPRESSED);
1997 ret = bdrv_pwrite(bs->file, cluster_offset, out_buf, out_len);
1998 if (ret < 0) {
1999 goto fail;
2003 ret = 0;
2004 fail:
2005 g_free(out_buf);
2006 return ret;
2009 static coroutine_fn int qcow2_co_flush_to_os(BlockDriverState *bs)
2011 BDRVQcowState *s = bs->opaque;
2012 int ret;
2014 qemu_co_mutex_lock(&s->lock);
2015 ret = qcow2_cache_flush(bs, s->l2_table_cache);
2016 if (ret < 0) {
2017 qemu_co_mutex_unlock(&s->lock);
2018 return ret;
2021 if (qcow2_need_accurate_refcounts(s)) {
2022 ret = qcow2_cache_flush(bs, s->refcount_block_cache);
2023 if (ret < 0) {
2024 qemu_co_mutex_unlock(&s->lock);
2025 return ret;
2028 qemu_co_mutex_unlock(&s->lock);
2030 return 0;
2033 static int qcow2_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
2035 BDRVQcowState *s = bs->opaque;
2036 bdi->unallocated_blocks_are_zero = true;
2037 bdi->can_write_zeroes_with_unmap = (s->qcow_version >= 3);
2038 bdi->cluster_size = s->cluster_size;
2039 bdi->vm_state_offset = qcow2_vm_state_offset(s);
2040 return 0;
2043 static ImageInfoSpecific *qcow2_get_specific_info(BlockDriverState *bs)
2045 BDRVQcowState *s = bs->opaque;
2046 ImageInfoSpecific *spec_info = g_new(ImageInfoSpecific, 1);
2048 *spec_info = (ImageInfoSpecific){
2049 .kind = IMAGE_INFO_SPECIFIC_KIND_QCOW2,
2051 .qcow2 = g_new(ImageInfoSpecificQCow2, 1),
2054 if (s->qcow_version == 2) {
2055 *spec_info->qcow2 = (ImageInfoSpecificQCow2){
2056 .compat = g_strdup("0.10"),
2058 } else if (s->qcow_version == 3) {
2059 *spec_info->qcow2 = (ImageInfoSpecificQCow2){
2060 .compat = g_strdup("1.1"),
2061 .lazy_refcounts = s->compatible_features &
2062 QCOW2_COMPAT_LAZY_REFCOUNTS,
2063 .has_lazy_refcounts = true,
2067 return spec_info;
2070 #if 0
2071 static void dump_refcounts(BlockDriverState *bs)
2073 BDRVQcowState *s = bs->opaque;
2074 int64_t nb_clusters, k, k1, size;
2075 int refcount;
2077 size = bdrv_getlength(bs->file);
2078 nb_clusters = size_to_clusters(s, size);
2079 for(k = 0; k < nb_clusters;) {
2080 k1 = k;
2081 refcount = get_refcount(bs, k);
2082 k++;
2083 while (k < nb_clusters && get_refcount(bs, k) == refcount)
2084 k++;
2085 printf("%" PRId64 ": refcount=%d nb=%" PRId64 "\n", k, refcount,
2086 k - k1);
2089 #endif
2091 static int qcow2_save_vmstate(BlockDriverState *bs, QEMUIOVector *qiov,
2092 int64_t pos)
2094 BDRVQcowState *s = bs->opaque;
2095 int64_t total_sectors = bs->total_sectors;
2096 int growable = bs->growable;
2097 bool zero_beyond_eof = bs->zero_beyond_eof;
2098 int ret;
2100 BLKDBG_EVENT(bs->file, BLKDBG_VMSTATE_SAVE);
2101 bs->growable = 1;
2102 bs->zero_beyond_eof = false;
2103 ret = bdrv_pwritev(bs, qcow2_vm_state_offset(s) + pos, qiov);
2104 bs->growable = growable;
2105 bs->zero_beyond_eof = zero_beyond_eof;
2107 /* bdrv_co_do_writev will have increased the total_sectors value to include
2108 * the VM state - the VM state is however not an actual part of the block
2109 * device, therefore, we need to restore the old value. */
2110 bs->total_sectors = total_sectors;
2112 return ret;
2115 static int qcow2_load_vmstate(BlockDriverState *bs, uint8_t *buf,
2116 int64_t pos, int size)
2118 BDRVQcowState *s = bs->opaque;
2119 int growable = bs->growable;
2120 bool zero_beyond_eof = bs->zero_beyond_eof;
2121 int ret;
2123 BLKDBG_EVENT(bs->file, BLKDBG_VMSTATE_LOAD);
2124 bs->growable = 1;
2125 bs->zero_beyond_eof = false;
2126 ret = bdrv_pread(bs, qcow2_vm_state_offset(s) + pos, buf, size);
2127 bs->growable = growable;
2128 bs->zero_beyond_eof = zero_beyond_eof;
2130 return ret;
2134 * Downgrades an image's version. To achieve this, any incompatible features
2135 * have to be removed.
2137 static int qcow2_downgrade(BlockDriverState *bs, int target_version)
2139 BDRVQcowState *s = bs->opaque;
2140 int current_version = s->qcow_version;
2141 int ret;
2143 if (target_version == current_version) {
2144 return 0;
2145 } else if (target_version > current_version) {
2146 return -EINVAL;
2147 } else if (target_version != 2) {
2148 return -EINVAL;
2151 if (s->refcount_order != 4) {
2152 /* we would have to convert the image to a refcount_order == 4 image
2153 * here; however, since qemu (at the time of writing this) does not
2154 * support anything different than 4 anyway, there is no point in doing
2155 * so right now; however, we should error out (if qemu supports this in
2156 * the future and this code has not been adapted) */
2157 error_report("qcow2_downgrade: Image refcount orders other than 4 are "
2158 "currently not supported.");
2159 return -ENOTSUP;
2162 /* clear incompatible features */
2163 if (s->incompatible_features & QCOW2_INCOMPAT_DIRTY) {
2164 ret = qcow2_mark_clean(bs);
2165 if (ret < 0) {
2166 return ret;
2170 /* with QCOW2_INCOMPAT_CORRUPT, it is pretty much impossible to get here in
2171 * the first place; if that happens nonetheless, returning -ENOTSUP is the
2172 * best thing to do anyway */
2174 if (s->incompatible_features) {
2175 return -ENOTSUP;
2178 /* since we can ignore compatible features, we can set them to 0 as well */
2179 s->compatible_features = 0;
2180 /* if lazy refcounts have been used, they have already been fixed through
2181 * clearing the dirty flag */
2183 /* clearing autoclear features is trivial */
2184 s->autoclear_features = 0;
2186 ret = qcow2_expand_zero_clusters(bs);
2187 if (ret < 0) {
2188 return ret;
2191 s->qcow_version = target_version;
2192 ret = qcow2_update_header(bs);
2193 if (ret < 0) {
2194 s->qcow_version = current_version;
2195 return ret;
2197 return 0;
2200 static int qcow2_amend_options(BlockDriverState *bs,
2201 QEMUOptionParameter *options)
2203 BDRVQcowState *s = bs->opaque;
2204 int old_version = s->qcow_version, new_version = old_version;
2205 uint64_t new_size = 0;
2206 const char *backing_file = NULL, *backing_format = NULL;
2207 bool lazy_refcounts = s->use_lazy_refcounts;
2208 int ret;
2209 int i;
2211 for (i = 0; options[i].name; i++)
2213 if (!options[i].assigned) {
2214 /* only change explicitly defined options */
2215 continue;
2218 if (!strcmp(options[i].name, "compat")) {
2219 if (!options[i].value.s) {
2220 /* preserve default */
2221 } else if (!strcmp(options[i].value.s, "0.10")) {
2222 new_version = 2;
2223 } else if (!strcmp(options[i].value.s, "1.1")) {
2224 new_version = 3;
2225 } else {
2226 fprintf(stderr, "Unknown compatibility level %s.\n",
2227 options[i].value.s);
2228 return -EINVAL;
2230 } else if (!strcmp(options[i].name, "preallocation")) {
2231 fprintf(stderr, "Cannot change preallocation mode.\n");
2232 return -ENOTSUP;
2233 } else if (!strcmp(options[i].name, "size")) {
2234 new_size = options[i].value.n;
2235 } else if (!strcmp(options[i].name, "backing_file")) {
2236 backing_file = options[i].value.s;
2237 } else if (!strcmp(options[i].name, "backing_fmt")) {
2238 backing_format = options[i].value.s;
2239 } else if (!strcmp(options[i].name, "encryption")) {
2240 if ((options[i].value.n != !!s->crypt_method)) {
2241 fprintf(stderr, "Changing the encryption flag is not "
2242 "supported.\n");
2243 return -ENOTSUP;
2245 } else if (!strcmp(options[i].name, "cluster_size")) {
2246 if (options[i].value.n != s->cluster_size) {
2247 fprintf(stderr, "Changing the cluster size is not "
2248 "supported.\n");
2249 return -ENOTSUP;
2251 } else if (!strcmp(options[i].name, "lazy_refcounts")) {
2252 lazy_refcounts = options[i].value.n;
2253 } else {
2254 /* if this assertion fails, this probably means a new option was
2255 * added without having it covered here */
2256 assert(false);
2260 if (new_version != old_version) {
2261 if (new_version > old_version) {
2262 /* Upgrade */
2263 s->qcow_version = new_version;
2264 ret = qcow2_update_header(bs);
2265 if (ret < 0) {
2266 s->qcow_version = old_version;
2267 return ret;
2269 } else {
2270 ret = qcow2_downgrade(bs, new_version);
2271 if (ret < 0) {
2272 return ret;
2277 if (backing_file || backing_format) {
2278 ret = qcow2_change_backing_file(bs, backing_file ?: bs->backing_file,
2279 backing_format ?: bs->backing_format);
2280 if (ret < 0) {
2281 return ret;
2285 if (s->use_lazy_refcounts != lazy_refcounts) {
2286 if (lazy_refcounts) {
2287 if (s->qcow_version < 3) {
2288 fprintf(stderr, "Lazy refcounts only supported with compatibility "
2289 "level 1.1 and above (use compat=1.1 or greater)\n");
2290 return -EINVAL;
2292 s->compatible_features |= QCOW2_COMPAT_LAZY_REFCOUNTS;
2293 ret = qcow2_update_header(bs);
2294 if (ret < 0) {
2295 s->compatible_features &= ~QCOW2_COMPAT_LAZY_REFCOUNTS;
2296 return ret;
2298 s->use_lazy_refcounts = true;
2299 } else {
2300 /* make image clean first */
2301 ret = qcow2_mark_clean(bs);
2302 if (ret < 0) {
2303 return ret;
2305 /* now disallow lazy refcounts */
2306 s->compatible_features &= ~QCOW2_COMPAT_LAZY_REFCOUNTS;
2307 ret = qcow2_update_header(bs);
2308 if (ret < 0) {
2309 s->compatible_features |= QCOW2_COMPAT_LAZY_REFCOUNTS;
2310 return ret;
2312 s->use_lazy_refcounts = false;
2316 if (new_size) {
2317 ret = bdrv_truncate(bs, new_size);
2318 if (ret < 0) {
2319 return ret;
2323 return 0;
2326 static QEMUOptionParameter qcow2_create_options[] = {
2328 .name = BLOCK_OPT_SIZE,
2329 .type = OPT_SIZE,
2330 .help = "Virtual disk size"
2333 .name = BLOCK_OPT_COMPAT_LEVEL,
2334 .type = OPT_STRING,
2335 .help = "Compatibility level (0.10 or 1.1)"
2338 .name = BLOCK_OPT_BACKING_FILE,
2339 .type = OPT_STRING,
2340 .help = "File name of a base image"
2343 .name = BLOCK_OPT_BACKING_FMT,
2344 .type = OPT_STRING,
2345 .help = "Image format of the base image"
2348 .name = BLOCK_OPT_ENCRYPT,
2349 .type = OPT_FLAG,
2350 .help = "Encrypt the image"
2353 .name = BLOCK_OPT_CLUSTER_SIZE,
2354 .type = OPT_SIZE,
2355 .help = "qcow2 cluster size",
2356 .value = { .n = DEFAULT_CLUSTER_SIZE },
2359 .name = BLOCK_OPT_PREALLOC,
2360 .type = OPT_STRING,
2361 .help = "Preallocation mode (allowed values: off, metadata)"
2364 .name = BLOCK_OPT_LAZY_REFCOUNTS,
2365 .type = OPT_FLAG,
2366 .help = "Postpone refcount updates",
2368 { NULL }
2371 static BlockDriver bdrv_qcow2 = {
2372 .format_name = "qcow2",
2373 .instance_size = sizeof(BDRVQcowState),
2374 .bdrv_probe = qcow2_probe,
2375 .bdrv_open = qcow2_open,
2376 .bdrv_close = qcow2_close,
2377 .bdrv_reopen_prepare = qcow2_reopen_prepare,
2378 .bdrv_create = qcow2_create,
2379 .bdrv_has_zero_init = bdrv_has_zero_init_1,
2380 .bdrv_co_get_block_status = qcow2_co_get_block_status,
2381 .bdrv_set_key = qcow2_set_key,
2383 .bdrv_co_readv = qcow2_co_readv,
2384 .bdrv_co_writev = qcow2_co_writev,
2385 .bdrv_co_flush_to_os = qcow2_co_flush_to_os,
2387 .bdrv_co_write_zeroes = qcow2_co_write_zeroes,
2388 .bdrv_co_discard = qcow2_co_discard,
2389 .bdrv_truncate = qcow2_truncate,
2390 .bdrv_write_compressed = qcow2_write_compressed,
2392 .bdrv_snapshot_create = qcow2_snapshot_create,
2393 .bdrv_snapshot_goto = qcow2_snapshot_goto,
2394 .bdrv_snapshot_delete = qcow2_snapshot_delete,
2395 .bdrv_snapshot_list = qcow2_snapshot_list,
2396 .bdrv_snapshot_load_tmp = qcow2_snapshot_load_tmp,
2397 .bdrv_get_info = qcow2_get_info,
2398 .bdrv_get_specific_info = qcow2_get_specific_info,
2400 .bdrv_save_vmstate = qcow2_save_vmstate,
2401 .bdrv_load_vmstate = qcow2_load_vmstate,
2403 .bdrv_change_backing_file = qcow2_change_backing_file,
2405 .bdrv_refresh_limits = qcow2_refresh_limits,
2406 .bdrv_invalidate_cache = qcow2_invalidate_cache,
2408 .create_options = qcow2_create_options,
2409 .bdrv_check = qcow2_check,
2410 .bdrv_amend_options = qcow2_amend_options,
2413 static void bdrv_qcow2_init(void)
2415 bdrv_register(&bdrv_qcow2);
2418 block_init(bdrv_qcow2_init);