net: cadence_gem: Make phy respond to broadcast
[qemu.git] / block.c
blob990a7542a9495ade8237e7b13a68216cc6300bd2
1 /*
2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
53 struct BdrvDirtyBitmap {
54 HBitmap *bitmap;
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
69 QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
72 QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80 int64_t sector_num,
81 QEMUIOVector *qiov,
82 int nb_sectors,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
85 void *opaque,
86 bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108 filename[1] == ':');
111 int is_windows_drive(const char *filename)
113 if (is_windows_drive_prefix(filename) &&
114 filename[2] == '\0')
115 return 1;
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
118 return 1;
119 return 0;
121 #endif
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125 ThrottleConfig *cfg)
127 int i;
129 throttle_config(&bs->throttle_state, cfg);
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
141 int i;
143 bs->io_limits_enabled = false;
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147 drained = true;
151 bs->io_limits_enabled = enabled;
153 return drained;
156 void bdrv_io_limits_disable(BlockDriverState *bs)
158 bs->io_limits_enabled = false;
160 bdrv_start_throttled_reqs(bs);
162 throttle_destroy(&bs->throttle_state);
165 static void bdrv_throttle_read_timer_cb(void *opaque)
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque)
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
182 QEMU_CLOCK_VIRTUAL,
183 bdrv_throttle_read_timer_cb,
184 bdrv_throttle_write_timer_cb,
185 bs);
186 bs->io_limits_enabled = true;
189 /* This function makes an IO wait if needed
191 * @nb_sectors: the number of sectors of the IO
192 * @is_write: is the IO a write
194 static void bdrv_io_limits_intercept(BlockDriverState *bs,
195 unsigned int bytes,
196 bool is_write)
198 /* does this io must wait */
199 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
201 /* if must wait or any request of this type throttled queue the IO */
202 if (must_wait ||
203 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
204 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
207 /* the IO will be executed, do the accounting */
208 throttle_account(&bs->throttle_state, is_write, bytes);
211 /* if the next request must wait -> do nothing */
212 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
213 return;
216 /* else queue next request for execution */
217 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
220 size_t bdrv_opt_mem_align(BlockDriverState *bs)
222 if (!bs || !bs->drv) {
223 /* 4k should be on the safe side */
224 return 4096;
227 return bs->bl.opt_mem_alignment;
230 /* check if the path starts with "<protocol>:" */
231 static int path_has_protocol(const char *path)
233 const char *p;
235 #ifdef _WIN32
236 if (is_windows_drive(path) ||
237 is_windows_drive_prefix(path)) {
238 return 0;
240 p = path + strcspn(path, ":/\\");
241 #else
242 p = path + strcspn(path, ":/");
243 #endif
245 return *p == ':';
248 int path_is_absolute(const char *path)
250 #ifdef _WIN32
251 /* specific case for names like: "\\.\d:" */
252 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
253 return 1;
255 return (*path == '/' || *path == '\\');
256 #else
257 return (*path == '/');
258 #endif
261 /* if filename is absolute, just copy it to dest. Otherwise, build a
262 path to it by considering it is relative to base_path. URL are
263 supported. */
264 void path_combine(char *dest, int dest_size,
265 const char *base_path,
266 const char *filename)
268 const char *p, *p1;
269 int len;
271 if (dest_size <= 0)
272 return;
273 if (path_is_absolute(filename)) {
274 pstrcpy(dest, dest_size, filename);
275 } else {
276 p = strchr(base_path, ':');
277 if (p)
278 p++;
279 else
280 p = base_path;
281 p1 = strrchr(base_path, '/');
282 #ifdef _WIN32
284 const char *p2;
285 p2 = strrchr(base_path, '\\');
286 if (!p1 || p2 > p1)
287 p1 = p2;
289 #endif
290 if (p1)
291 p1++;
292 else
293 p1 = base_path;
294 if (p1 > p)
295 p = p1;
296 len = p - base_path;
297 if (len > dest_size - 1)
298 len = dest_size - 1;
299 memcpy(dest, base_path, len);
300 dest[len] = '\0';
301 pstrcat(dest, dest_size, filename);
305 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
307 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
308 pstrcpy(dest, sz, bs->backing_file);
309 } else {
310 path_combine(dest, sz, bs->filename, bs->backing_file);
314 void bdrv_register(BlockDriver *bdrv)
316 /* Block drivers without coroutine functions need emulation */
317 if (!bdrv->bdrv_co_readv) {
318 bdrv->bdrv_co_readv = bdrv_co_readv_em;
319 bdrv->bdrv_co_writev = bdrv_co_writev_em;
321 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
322 * the block driver lacks aio we need to emulate that too.
324 if (!bdrv->bdrv_aio_readv) {
325 /* add AIO emulation layer */
326 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
327 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
331 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
334 /* create a new block device (by default it is empty) */
335 BlockDriverState *bdrv_new(const char *device_name)
337 BlockDriverState *bs;
339 bs = g_malloc0(sizeof(BlockDriverState));
340 QLIST_INIT(&bs->dirty_bitmaps);
341 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
342 if (device_name[0] != '\0') {
343 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
345 bdrv_iostatus_disable(bs);
346 notifier_list_init(&bs->close_notifiers);
347 notifier_with_return_list_init(&bs->before_write_notifiers);
348 qemu_co_queue_init(&bs->throttled_reqs[0]);
349 qemu_co_queue_init(&bs->throttled_reqs[1]);
350 bs->refcnt = 1;
352 return bs;
355 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
357 notifier_list_add(&bs->close_notifiers, notify);
360 BlockDriver *bdrv_find_format(const char *format_name)
362 BlockDriver *drv1;
363 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
364 if (!strcmp(drv1->format_name, format_name)) {
365 return drv1;
368 return NULL;
371 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
373 static const char *whitelist_rw[] = {
374 CONFIG_BDRV_RW_WHITELIST
376 static const char *whitelist_ro[] = {
377 CONFIG_BDRV_RO_WHITELIST
379 const char **p;
381 if (!whitelist_rw[0] && !whitelist_ro[0]) {
382 return 1; /* no whitelist, anything goes */
385 for (p = whitelist_rw; *p; p++) {
386 if (!strcmp(drv->format_name, *p)) {
387 return 1;
390 if (read_only) {
391 for (p = whitelist_ro; *p; p++) {
392 if (!strcmp(drv->format_name, *p)) {
393 return 1;
397 return 0;
400 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
401 bool read_only)
403 BlockDriver *drv = bdrv_find_format(format_name);
404 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
407 typedef struct CreateCo {
408 BlockDriver *drv;
409 char *filename;
410 QEMUOptionParameter *options;
411 int ret;
412 Error *err;
413 } CreateCo;
415 static void coroutine_fn bdrv_create_co_entry(void *opaque)
417 Error *local_err = NULL;
418 int ret;
420 CreateCo *cco = opaque;
421 assert(cco->drv);
423 ret = cco->drv->bdrv_create(cco->filename, cco->options, &local_err);
424 if (local_err) {
425 error_propagate(&cco->err, local_err);
427 cco->ret = ret;
430 int bdrv_create(BlockDriver *drv, const char* filename,
431 QEMUOptionParameter *options, Error **errp)
433 int ret;
435 Coroutine *co;
436 CreateCo cco = {
437 .drv = drv,
438 .filename = g_strdup(filename),
439 .options = options,
440 .ret = NOT_DONE,
441 .err = NULL,
444 if (!drv->bdrv_create) {
445 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
446 ret = -ENOTSUP;
447 goto out;
450 if (qemu_in_coroutine()) {
451 /* Fast-path if already in coroutine context */
452 bdrv_create_co_entry(&cco);
453 } else {
454 co = qemu_coroutine_create(bdrv_create_co_entry);
455 qemu_coroutine_enter(co, &cco);
456 while (cco.ret == NOT_DONE) {
457 qemu_aio_wait();
461 ret = cco.ret;
462 if (ret < 0) {
463 if (cco.err) {
464 error_propagate(errp, cco.err);
465 } else {
466 error_setg_errno(errp, -ret, "Could not create image");
470 out:
471 g_free(cco.filename);
472 return ret;
475 int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
476 Error **errp)
478 BlockDriver *drv;
479 Error *local_err = NULL;
480 int ret;
482 drv = bdrv_find_protocol(filename, true);
483 if (drv == NULL) {
484 error_setg(errp, "Could not find protocol for file '%s'", filename);
485 return -ENOENT;
488 ret = bdrv_create(drv, filename, options, &local_err);
489 if (local_err) {
490 error_propagate(errp, local_err);
492 return ret;
495 int bdrv_refresh_limits(BlockDriverState *bs)
497 BlockDriver *drv = bs->drv;
499 memset(&bs->bl, 0, sizeof(bs->bl));
501 if (!drv) {
502 return 0;
505 /* Take some limits from the children as a default */
506 if (bs->file) {
507 bdrv_refresh_limits(bs->file);
508 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
509 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
510 } else {
511 bs->bl.opt_mem_alignment = 512;
514 if (bs->backing_hd) {
515 bdrv_refresh_limits(bs->backing_hd);
516 bs->bl.opt_transfer_length =
517 MAX(bs->bl.opt_transfer_length,
518 bs->backing_hd->bl.opt_transfer_length);
519 bs->bl.opt_mem_alignment =
520 MAX(bs->bl.opt_mem_alignment,
521 bs->backing_hd->bl.opt_mem_alignment);
524 /* Then let the driver override it */
525 if (drv->bdrv_refresh_limits) {
526 return drv->bdrv_refresh_limits(bs);
529 return 0;
533 * Create a uniquely-named empty temporary file.
534 * Return 0 upon success, otherwise a negative errno value.
536 int get_tmp_filename(char *filename, int size)
538 #ifdef _WIN32
539 char temp_dir[MAX_PATH];
540 /* GetTempFileName requires that its output buffer (4th param)
541 have length MAX_PATH or greater. */
542 assert(size >= MAX_PATH);
543 return (GetTempPath(MAX_PATH, temp_dir)
544 && GetTempFileName(temp_dir, "qem", 0, filename)
545 ? 0 : -GetLastError());
546 #else
547 int fd;
548 const char *tmpdir;
549 tmpdir = getenv("TMPDIR");
550 if (!tmpdir) {
551 tmpdir = "/var/tmp";
553 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
554 return -EOVERFLOW;
556 fd = mkstemp(filename);
557 if (fd < 0) {
558 return -errno;
560 if (close(fd) != 0) {
561 unlink(filename);
562 return -errno;
564 return 0;
565 #endif
569 * Detect host devices. By convention, /dev/cdrom[N] is always
570 * recognized as a host CDROM.
572 static BlockDriver *find_hdev_driver(const char *filename)
574 int score_max = 0, score;
575 BlockDriver *drv = NULL, *d;
577 QLIST_FOREACH(d, &bdrv_drivers, list) {
578 if (d->bdrv_probe_device) {
579 score = d->bdrv_probe_device(filename);
580 if (score > score_max) {
581 score_max = score;
582 drv = d;
587 return drv;
590 BlockDriver *bdrv_find_protocol(const char *filename,
591 bool allow_protocol_prefix)
593 BlockDriver *drv1;
594 char protocol[128];
595 int len;
596 const char *p;
598 /* TODO Drivers without bdrv_file_open must be specified explicitly */
601 * XXX(hch): we really should not let host device detection
602 * override an explicit protocol specification, but moving this
603 * later breaks access to device names with colons in them.
604 * Thanks to the brain-dead persistent naming schemes on udev-
605 * based Linux systems those actually are quite common.
607 drv1 = find_hdev_driver(filename);
608 if (drv1) {
609 return drv1;
612 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
613 return bdrv_find_format("file");
616 p = strchr(filename, ':');
617 assert(p != NULL);
618 len = p - filename;
619 if (len > sizeof(protocol) - 1)
620 len = sizeof(protocol) - 1;
621 memcpy(protocol, filename, len);
622 protocol[len] = '\0';
623 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
624 if (drv1->protocol_name &&
625 !strcmp(drv1->protocol_name, protocol)) {
626 return drv1;
629 return NULL;
632 static int find_image_format(BlockDriverState *bs, const char *filename,
633 BlockDriver **pdrv, Error **errp)
635 int score, score_max;
636 BlockDriver *drv1, *drv;
637 uint8_t buf[2048];
638 int ret = 0;
640 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
641 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
642 drv = bdrv_find_format("raw");
643 if (!drv) {
644 error_setg(errp, "Could not find raw image format");
645 ret = -ENOENT;
647 *pdrv = drv;
648 return ret;
651 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
652 if (ret < 0) {
653 error_setg_errno(errp, -ret, "Could not read image for determining its "
654 "format");
655 *pdrv = NULL;
656 return ret;
659 score_max = 0;
660 drv = NULL;
661 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
662 if (drv1->bdrv_probe) {
663 score = drv1->bdrv_probe(buf, ret, filename);
664 if (score > score_max) {
665 score_max = score;
666 drv = drv1;
670 if (!drv) {
671 error_setg(errp, "Could not determine image format: No compatible "
672 "driver found");
673 ret = -ENOENT;
675 *pdrv = drv;
676 return ret;
680 * Set the current 'total_sectors' value
682 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
684 BlockDriver *drv = bs->drv;
686 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
687 if (bs->sg)
688 return 0;
690 /* query actual device if possible, otherwise just trust the hint */
691 if (drv->bdrv_getlength) {
692 int64_t length = drv->bdrv_getlength(bs);
693 if (length < 0) {
694 return length;
696 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
699 bs->total_sectors = hint;
700 return 0;
704 * Set open flags for a given discard mode
706 * Return 0 on success, -1 if the discard mode was invalid.
708 int bdrv_parse_discard_flags(const char *mode, int *flags)
710 *flags &= ~BDRV_O_UNMAP;
712 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
713 /* do nothing */
714 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
715 *flags |= BDRV_O_UNMAP;
716 } else {
717 return -1;
720 return 0;
724 * Set open flags for a given cache mode
726 * Return 0 on success, -1 if the cache mode was invalid.
728 int bdrv_parse_cache_flags(const char *mode, int *flags)
730 *flags &= ~BDRV_O_CACHE_MASK;
732 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
733 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
734 } else if (!strcmp(mode, "directsync")) {
735 *flags |= BDRV_O_NOCACHE;
736 } else if (!strcmp(mode, "writeback")) {
737 *flags |= BDRV_O_CACHE_WB;
738 } else if (!strcmp(mode, "unsafe")) {
739 *flags |= BDRV_O_CACHE_WB;
740 *flags |= BDRV_O_NO_FLUSH;
741 } else if (!strcmp(mode, "writethrough")) {
742 /* this is the default */
743 } else {
744 return -1;
747 return 0;
751 * The copy-on-read flag is actually a reference count so multiple users may
752 * use the feature without worrying about clobbering its previous state.
753 * Copy-on-read stays enabled until all users have called to disable it.
755 void bdrv_enable_copy_on_read(BlockDriverState *bs)
757 bs->copy_on_read++;
760 void bdrv_disable_copy_on_read(BlockDriverState *bs)
762 assert(bs->copy_on_read > 0);
763 bs->copy_on_read--;
766 static int bdrv_open_flags(BlockDriverState *bs, int flags)
768 int open_flags = flags | BDRV_O_CACHE_WB;
770 /* The backing file of a temporary snapshot is read-only */
771 if (flags & BDRV_O_SNAPSHOT) {
772 open_flags &= ~BDRV_O_RDWR;
776 * Clear flags that are internal to the block layer before opening the
777 * image.
779 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
782 * Snapshots should be writable.
784 if (bs->is_temporary) {
785 open_flags |= BDRV_O_RDWR;
788 return open_flags;
791 static int bdrv_assign_node_name(BlockDriverState *bs,
792 const char *node_name,
793 Error **errp)
795 if (!node_name) {
796 return 0;
799 /* empty string node name is invalid */
800 if (node_name[0] == '\0') {
801 error_setg(errp, "Empty node name");
802 return -EINVAL;
805 /* takes care of avoiding namespaces collisions */
806 if (bdrv_find(node_name)) {
807 error_setg(errp, "node-name=%s is conflicting with a device id",
808 node_name);
809 return -EINVAL;
812 /* takes care of avoiding duplicates node names */
813 if (bdrv_find_node(node_name)) {
814 error_setg(errp, "Duplicate node name");
815 return -EINVAL;
818 /* copy node name into the bs and insert it into the graph list */
819 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
820 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
822 return 0;
826 * Common part for opening disk images and files
828 * Removes all processed options from *options.
830 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
831 QDict *options, int flags, BlockDriver *drv, Error **errp)
833 int ret, open_flags;
834 const char *filename;
835 const char *node_name = NULL;
836 Error *local_err = NULL;
838 assert(drv != NULL);
839 assert(bs->file == NULL);
840 assert(options != NULL && bs->options != options);
842 if (file != NULL) {
843 filename = file->filename;
844 } else {
845 filename = qdict_get_try_str(options, "filename");
848 if (drv->bdrv_needs_filename && !filename) {
849 error_setg(errp, "The '%s' block driver requires a file name",
850 drv->format_name);
851 return -EINVAL;
854 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
856 node_name = qdict_get_try_str(options, "node-name");
857 ret = bdrv_assign_node_name(bs, node_name, errp);
858 if (ret < 0) {
859 return ret;
861 qdict_del(options, "node-name");
863 /* bdrv_open() with directly using a protocol as drv. This layer is already
864 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
865 * and return immediately. */
866 if (file != NULL && drv->bdrv_file_open) {
867 bdrv_swap(file, bs);
868 return 0;
871 bs->open_flags = flags;
872 bs->guest_block_size = 512;
873 bs->request_alignment = 512;
874 bs->zero_beyond_eof = true;
875 open_flags = bdrv_open_flags(bs, flags);
876 bs->read_only = !(open_flags & BDRV_O_RDWR);
878 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
879 error_setg(errp,
880 !bs->read_only && bdrv_is_whitelisted(drv, true)
881 ? "Driver '%s' can only be used for read-only devices"
882 : "Driver '%s' is not whitelisted",
883 drv->format_name);
884 return -ENOTSUP;
887 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
888 if (flags & BDRV_O_COPY_ON_READ) {
889 if (!bs->read_only) {
890 bdrv_enable_copy_on_read(bs);
891 } else {
892 error_setg(errp, "Can't use copy-on-read on read-only device");
893 return -EINVAL;
897 if (filename != NULL) {
898 pstrcpy(bs->filename, sizeof(bs->filename), filename);
899 } else {
900 bs->filename[0] = '\0';
903 bs->drv = drv;
904 bs->opaque = g_malloc0(drv->instance_size);
906 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
908 /* Open the image, either directly or using a protocol */
909 if (drv->bdrv_file_open) {
910 assert(file == NULL);
911 assert(!drv->bdrv_needs_filename || filename != NULL);
912 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
913 } else {
914 if (file == NULL) {
915 error_setg(errp, "Can't use '%s' as a block driver for the "
916 "protocol level", drv->format_name);
917 ret = -EINVAL;
918 goto free_and_fail;
920 bs->file = file;
921 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
924 if (ret < 0) {
925 if (local_err) {
926 error_propagate(errp, local_err);
927 } else if (bs->filename[0]) {
928 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
929 } else {
930 error_setg_errno(errp, -ret, "Could not open image");
932 goto free_and_fail;
935 ret = refresh_total_sectors(bs, bs->total_sectors);
936 if (ret < 0) {
937 error_setg_errno(errp, -ret, "Could not refresh total sector count");
938 goto free_and_fail;
941 bdrv_refresh_limits(bs);
942 assert(bdrv_opt_mem_align(bs) != 0);
943 assert((bs->request_alignment != 0) || bs->sg);
945 #ifndef _WIN32
946 if (bs->is_temporary) {
947 assert(bs->filename[0] != '\0');
948 unlink(bs->filename);
950 #endif
951 return 0;
953 free_and_fail:
954 bs->file = NULL;
955 g_free(bs->opaque);
956 bs->opaque = NULL;
957 bs->drv = NULL;
958 return ret;
962 * Opens a file using a protocol (file, host_device, nbd, ...)
964 * options is an indirect pointer to a QDict of options to pass to the block
965 * drivers, or pointer to NULL for an empty set of options. If this function
966 * takes ownership of the QDict reference, it will set *options to NULL;
967 * otherwise, it will contain unused/unrecognized options after this function
968 * returns. Then, the caller is responsible for freeing it. If it intends to
969 * reuse the QDict, QINCREF() should be called beforehand.
971 static int bdrv_file_open(BlockDriverState *bs, const char *filename,
972 QDict **options, int flags, Error **errp)
974 BlockDriver *drv;
975 const char *drvname;
976 bool parse_filename = false;
977 Error *local_err = NULL;
978 int ret;
980 /* Fetch the file name from the options QDict if necessary */
981 if (!filename) {
982 filename = qdict_get_try_str(*options, "filename");
983 } else if (filename && !qdict_haskey(*options, "filename")) {
984 qdict_put(*options, "filename", qstring_from_str(filename));
985 parse_filename = true;
986 } else {
987 error_setg(errp, "Can't specify 'file' and 'filename' options at the "
988 "same time");
989 ret = -EINVAL;
990 goto fail;
993 /* Find the right block driver */
994 drvname = qdict_get_try_str(*options, "driver");
995 if (drvname) {
996 drv = bdrv_find_format(drvname);
997 if (!drv) {
998 error_setg(errp, "Unknown driver '%s'", drvname);
1000 qdict_del(*options, "driver");
1001 } else if (filename) {
1002 drv = bdrv_find_protocol(filename, parse_filename);
1003 if (!drv) {
1004 error_setg(errp, "Unknown protocol");
1006 } else {
1007 error_setg(errp, "Must specify either driver or file");
1008 drv = NULL;
1011 if (!drv) {
1012 /* errp has been set already */
1013 ret = -ENOENT;
1014 goto fail;
1017 /* Parse the filename and open it */
1018 if (drv->bdrv_parse_filename && parse_filename) {
1019 drv->bdrv_parse_filename(filename, *options, &local_err);
1020 if (local_err) {
1021 error_propagate(errp, local_err);
1022 ret = -EINVAL;
1023 goto fail;
1026 if (!drv->bdrv_needs_filename) {
1027 qdict_del(*options, "filename");
1028 } else {
1029 filename = qdict_get_str(*options, "filename");
1033 if (!drv->bdrv_file_open) {
1034 ret = bdrv_open(&bs, filename, NULL, *options, flags, drv, &local_err);
1035 *options = NULL;
1036 } else {
1037 ret = bdrv_open_common(bs, NULL, *options, flags, drv, &local_err);
1039 if (ret < 0) {
1040 error_propagate(errp, local_err);
1041 goto fail;
1044 bs->growable = 1;
1045 return 0;
1047 fail:
1048 return ret;
1052 * Opens the backing file for a BlockDriverState if not yet open
1054 * options is a QDict of options to pass to the block drivers, or NULL for an
1055 * empty set of options. The reference to the QDict is transferred to this
1056 * function (even on failure), so if the caller intends to reuse the dictionary,
1057 * it needs to use QINCREF() before calling bdrv_file_open.
1059 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1061 char backing_filename[PATH_MAX];
1062 int back_flags, ret;
1063 BlockDriver *back_drv = NULL;
1064 Error *local_err = NULL;
1066 if (bs->backing_hd != NULL) {
1067 QDECREF(options);
1068 return 0;
1071 /* NULL means an empty set of options */
1072 if (options == NULL) {
1073 options = qdict_new();
1076 bs->open_flags &= ~BDRV_O_NO_BACKING;
1077 if (qdict_haskey(options, "file.filename")) {
1078 backing_filename[0] = '\0';
1079 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1080 QDECREF(options);
1081 return 0;
1082 } else {
1083 bdrv_get_full_backing_filename(bs, backing_filename,
1084 sizeof(backing_filename));
1087 if (bs->backing_format[0] != '\0') {
1088 back_drv = bdrv_find_format(bs->backing_format);
1091 /* backing files always opened read-only */
1092 back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT |
1093 BDRV_O_COPY_ON_READ);
1095 assert(bs->backing_hd == NULL);
1096 ret = bdrv_open(&bs->backing_hd,
1097 *backing_filename ? backing_filename : NULL, NULL, options,
1098 back_flags, back_drv, &local_err);
1099 if (ret < 0) {
1100 bs->backing_hd = NULL;
1101 bs->open_flags |= BDRV_O_NO_BACKING;
1102 error_setg(errp, "Could not open backing file: %s",
1103 error_get_pretty(local_err));
1104 error_free(local_err);
1105 return ret;
1108 if (bs->backing_hd->file) {
1109 pstrcpy(bs->backing_file, sizeof(bs->backing_file),
1110 bs->backing_hd->file->filename);
1113 /* Recalculate the BlockLimits with the backing file */
1114 bdrv_refresh_limits(bs);
1116 return 0;
1120 * Opens a disk image whose options are given as BlockdevRef in another block
1121 * device's options.
1123 * If allow_none is true, no image will be opened if filename is false and no
1124 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1126 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1127 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1128 * itself, all options starting with "${bdref_key}." are considered part of the
1129 * BlockdevRef.
1131 * The BlockdevRef will be removed from the options QDict.
1133 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1135 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1136 QDict *options, const char *bdref_key, int flags,
1137 bool allow_none, Error **errp)
1139 QDict *image_options;
1140 int ret;
1141 char *bdref_key_dot;
1142 const char *reference;
1144 assert(pbs);
1145 assert(*pbs == NULL);
1147 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1148 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1149 g_free(bdref_key_dot);
1151 reference = qdict_get_try_str(options, bdref_key);
1152 if (!filename && !reference && !qdict_size(image_options)) {
1153 if (allow_none) {
1154 ret = 0;
1155 } else {
1156 error_setg(errp, "A block device must be specified for \"%s\"",
1157 bdref_key);
1158 ret = -EINVAL;
1160 goto done;
1163 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1165 done:
1166 qdict_del(options, bdref_key);
1167 return ret;
1170 void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp)
1172 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1173 char tmp_filename[PATH_MAX + 1];
1175 int64_t total_size;
1176 BlockDriver *bdrv_qcow2;
1177 QEMUOptionParameter *create_options;
1178 QDict *snapshot_options;
1179 BlockDriverState *bs_snapshot;
1180 Error *local_err;
1181 int ret;
1183 /* if snapshot, we create a temporary backing file and open it
1184 instead of opening 'filename' directly */
1186 /* Get the required size from the image */
1187 total_size = bdrv_getlength(bs);
1188 if (total_size < 0) {
1189 error_setg_errno(errp, -total_size, "Could not get image size");
1190 return;
1192 total_size &= BDRV_SECTOR_MASK;
1194 /* Create the temporary image */
1195 ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
1196 if (ret < 0) {
1197 error_setg_errno(errp, -ret, "Could not get temporary filename");
1198 return;
1201 bdrv_qcow2 = bdrv_find_format("qcow2");
1202 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1203 NULL);
1205 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1207 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
1208 free_option_parameters(create_options);
1209 if (ret < 0) {
1210 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1211 "'%s': %s", tmp_filename,
1212 error_get_pretty(local_err));
1213 error_free(local_err);
1214 return;
1217 /* Prepare a new options QDict for the temporary file */
1218 snapshot_options = qdict_new();
1219 qdict_put(snapshot_options, "file.driver",
1220 qstring_from_str("file"));
1221 qdict_put(snapshot_options, "file.filename",
1222 qstring_from_str(tmp_filename));
1224 bs_snapshot = bdrv_new("");
1225 bs_snapshot->is_temporary = 1;
1227 ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
1228 bs->open_flags & ~BDRV_O_SNAPSHOT, bdrv_qcow2, &local_err);
1229 if (ret < 0) {
1230 error_propagate(errp, local_err);
1231 return;
1234 bdrv_append(bs_snapshot, bs);
1238 * Opens a disk image (raw, qcow2, vmdk, ...)
1240 * options is a QDict of options to pass to the block drivers, or NULL for an
1241 * empty set of options. The reference to the QDict belongs to the block layer
1242 * after the call (even on failure), so if the caller intends to reuse the
1243 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1245 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1246 * If it is not NULL, the referenced BDS will be reused.
1248 * The reference parameter may be used to specify an existing block device which
1249 * should be opened. If specified, neither options nor a filename may be given,
1250 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1252 int bdrv_open(BlockDriverState **pbs, const char *filename,
1253 const char *reference, QDict *options, int flags,
1254 BlockDriver *drv, Error **errp)
1256 int ret;
1257 BlockDriverState *file = NULL, *bs;
1258 const char *drvname;
1259 Error *local_err = NULL;
1261 assert(pbs);
1263 if (reference) {
1264 bool options_non_empty = options ? qdict_size(options) : false;
1265 QDECREF(options);
1267 if (*pbs) {
1268 error_setg(errp, "Cannot reuse an existing BDS when referencing "
1269 "another block device");
1270 return -EINVAL;
1273 if (filename || options_non_empty) {
1274 error_setg(errp, "Cannot reference an existing block device with "
1275 "additional options or a new filename");
1276 return -EINVAL;
1279 bs = bdrv_lookup_bs(reference, reference, errp);
1280 if (!bs) {
1281 return -ENODEV;
1283 bdrv_ref(bs);
1284 *pbs = bs;
1285 return 0;
1288 if (*pbs) {
1289 bs = *pbs;
1290 } else {
1291 bs = bdrv_new("");
1294 /* NULL means an empty set of options */
1295 if (options == NULL) {
1296 options = qdict_new();
1299 bs->options = options;
1300 options = qdict_clone_shallow(options);
1302 if (flags & BDRV_O_PROTOCOL) {
1303 assert(!drv);
1304 ret = bdrv_file_open(bs, filename, &options, flags & ~BDRV_O_PROTOCOL,
1305 &local_err);
1306 if (!ret) {
1307 drv = bs->drv;
1308 goto done;
1309 } else if (bs->drv) {
1310 goto close_and_fail;
1311 } else {
1312 goto fail;
1316 /* Open image file without format layer */
1317 if (flags & BDRV_O_RDWR) {
1318 flags |= BDRV_O_ALLOW_RDWR;
1321 assert(file == NULL);
1322 ret = bdrv_open_image(&file, filename, options, "file",
1323 bdrv_open_flags(bs, flags | BDRV_O_UNMAP) |
1324 BDRV_O_PROTOCOL, true, &local_err);
1325 if (ret < 0) {
1326 goto unlink_and_fail;
1329 /* Find the right image format driver */
1330 drvname = qdict_get_try_str(options, "driver");
1331 if (drvname) {
1332 drv = bdrv_find_format(drvname);
1333 qdict_del(options, "driver");
1334 if (!drv) {
1335 error_setg(errp, "Invalid driver: '%s'", drvname);
1336 ret = -EINVAL;
1337 goto unlink_and_fail;
1341 if (!drv) {
1342 if (file) {
1343 ret = find_image_format(file, filename, &drv, &local_err);
1344 } else {
1345 error_setg(errp, "Must specify either driver or file");
1346 ret = -EINVAL;
1347 goto unlink_and_fail;
1351 if (!drv) {
1352 goto unlink_and_fail;
1355 /* Open the image */
1356 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1357 if (ret < 0) {
1358 goto unlink_and_fail;
1361 if (file && (bs->file != file)) {
1362 bdrv_unref(file);
1363 file = NULL;
1366 /* If there is a backing file, use it */
1367 if ((flags & BDRV_O_NO_BACKING) == 0) {
1368 QDict *backing_options;
1370 qdict_extract_subqdict(options, &backing_options, "backing.");
1371 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1372 if (ret < 0) {
1373 goto close_and_fail;
1377 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1378 * temporary snapshot afterwards. */
1379 if (flags & BDRV_O_SNAPSHOT) {
1380 bdrv_append_temp_snapshot(bs, &local_err);
1381 if (local_err) {
1382 error_propagate(errp, local_err);
1383 goto close_and_fail;
1388 done:
1389 /* Check if any unknown options were used */
1390 if (options && (qdict_size(options) != 0)) {
1391 const QDictEntry *entry = qdict_first(options);
1392 if (flags & BDRV_O_PROTOCOL) {
1393 error_setg(errp, "Block protocol '%s' doesn't support the option "
1394 "'%s'", drv->format_name, entry->key);
1395 } else {
1396 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1397 "support the option '%s'", drv->format_name,
1398 bs->device_name, entry->key);
1401 ret = -EINVAL;
1402 goto close_and_fail;
1405 if (!bdrv_key_required(bs)) {
1406 bdrv_dev_change_media_cb(bs, true);
1407 } else if (!runstate_check(RUN_STATE_PRELAUNCH)
1408 && !runstate_check(RUN_STATE_INMIGRATE)
1409 && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */
1410 error_setg(errp,
1411 "Guest must be stopped for opening of encrypted image");
1412 ret = -EBUSY;
1413 goto close_and_fail;
1416 QDECREF(options);
1417 *pbs = bs;
1418 return 0;
1420 unlink_and_fail:
1421 if (file != NULL) {
1422 bdrv_unref(file);
1424 if (bs->is_temporary) {
1425 unlink(filename);
1427 fail:
1428 QDECREF(bs->options);
1429 QDECREF(options);
1430 bs->options = NULL;
1431 if (!*pbs) {
1432 /* If *pbs is NULL, a new BDS has been created in this function and
1433 needs to be freed now. Otherwise, it does not need to be closed,
1434 since it has not really been opened yet. */
1435 bdrv_unref(bs);
1437 if (local_err) {
1438 error_propagate(errp, local_err);
1440 return ret;
1442 close_and_fail:
1443 /* See fail path, but now the BDS has to be always closed */
1444 if (*pbs) {
1445 bdrv_close(bs);
1446 } else {
1447 bdrv_unref(bs);
1449 QDECREF(options);
1450 if (local_err) {
1451 error_propagate(errp, local_err);
1453 return ret;
1456 typedef struct BlockReopenQueueEntry {
1457 bool prepared;
1458 BDRVReopenState state;
1459 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1460 } BlockReopenQueueEntry;
1463 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1464 * reopen of multiple devices.
1466 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1467 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1468 * be created and initialized. This newly created BlockReopenQueue should be
1469 * passed back in for subsequent calls that are intended to be of the same
1470 * atomic 'set'.
1472 * bs is the BlockDriverState to add to the reopen queue.
1474 * flags contains the open flags for the associated bs
1476 * returns a pointer to bs_queue, which is either the newly allocated
1477 * bs_queue, or the existing bs_queue being used.
1480 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1481 BlockDriverState *bs, int flags)
1483 assert(bs != NULL);
1485 BlockReopenQueueEntry *bs_entry;
1486 if (bs_queue == NULL) {
1487 bs_queue = g_new0(BlockReopenQueue, 1);
1488 QSIMPLEQ_INIT(bs_queue);
1491 if (bs->file) {
1492 bdrv_reopen_queue(bs_queue, bs->file, flags);
1495 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1496 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1498 bs_entry->state.bs = bs;
1499 bs_entry->state.flags = flags;
1501 return bs_queue;
1505 * Reopen multiple BlockDriverStates atomically & transactionally.
1507 * The queue passed in (bs_queue) must have been built up previous
1508 * via bdrv_reopen_queue().
1510 * Reopens all BDS specified in the queue, with the appropriate
1511 * flags. All devices are prepared for reopen, and failure of any
1512 * device will cause all device changes to be abandonded, and intermediate
1513 * data cleaned up.
1515 * If all devices prepare successfully, then the changes are committed
1516 * to all devices.
1519 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1521 int ret = -1;
1522 BlockReopenQueueEntry *bs_entry, *next;
1523 Error *local_err = NULL;
1525 assert(bs_queue != NULL);
1527 bdrv_drain_all();
1529 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1530 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1531 error_propagate(errp, local_err);
1532 goto cleanup;
1534 bs_entry->prepared = true;
1537 /* If we reach this point, we have success and just need to apply the
1538 * changes
1540 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1541 bdrv_reopen_commit(&bs_entry->state);
1544 ret = 0;
1546 cleanup:
1547 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1548 if (ret && bs_entry->prepared) {
1549 bdrv_reopen_abort(&bs_entry->state);
1551 g_free(bs_entry);
1553 g_free(bs_queue);
1554 return ret;
1558 /* Reopen a single BlockDriverState with the specified flags. */
1559 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1561 int ret = -1;
1562 Error *local_err = NULL;
1563 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1565 ret = bdrv_reopen_multiple(queue, &local_err);
1566 if (local_err != NULL) {
1567 error_propagate(errp, local_err);
1569 return ret;
1574 * Prepares a BlockDriverState for reopen. All changes are staged in the
1575 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1576 * the block driver layer .bdrv_reopen_prepare()
1578 * bs is the BlockDriverState to reopen
1579 * flags are the new open flags
1580 * queue is the reopen queue
1582 * Returns 0 on success, non-zero on error. On error errp will be set
1583 * as well.
1585 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1586 * It is the responsibility of the caller to then call the abort() or
1587 * commit() for any other BDS that have been left in a prepare() state
1590 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1591 Error **errp)
1593 int ret = -1;
1594 Error *local_err = NULL;
1595 BlockDriver *drv;
1597 assert(reopen_state != NULL);
1598 assert(reopen_state->bs->drv != NULL);
1599 drv = reopen_state->bs->drv;
1601 /* if we are to stay read-only, do not allow permission change
1602 * to r/w */
1603 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1604 reopen_state->flags & BDRV_O_RDWR) {
1605 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1606 reopen_state->bs->device_name);
1607 goto error;
1611 ret = bdrv_flush(reopen_state->bs);
1612 if (ret) {
1613 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1614 strerror(-ret));
1615 goto error;
1618 if (drv->bdrv_reopen_prepare) {
1619 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1620 if (ret) {
1621 if (local_err != NULL) {
1622 error_propagate(errp, local_err);
1623 } else {
1624 error_setg(errp, "failed while preparing to reopen image '%s'",
1625 reopen_state->bs->filename);
1627 goto error;
1629 } else {
1630 /* It is currently mandatory to have a bdrv_reopen_prepare()
1631 * handler for each supported drv. */
1632 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1633 drv->format_name, reopen_state->bs->device_name,
1634 "reopening of file");
1635 ret = -1;
1636 goto error;
1639 ret = 0;
1641 error:
1642 return ret;
1646 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1647 * makes them final by swapping the staging BlockDriverState contents into
1648 * the active BlockDriverState contents.
1650 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1652 BlockDriver *drv;
1654 assert(reopen_state != NULL);
1655 drv = reopen_state->bs->drv;
1656 assert(drv != NULL);
1658 /* If there are any driver level actions to take */
1659 if (drv->bdrv_reopen_commit) {
1660 drv->bdrv_reopen_commit(reopen_state);
1663 /* set BDS specific flags now */
1664 reopen_state->bs->open_flags = reopen_state->flags;
1665 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1666 BDRV_O_CACHE_WB);
1667 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1669 bdrv_refresh_limits(reopen_state->bs);
1673 * Abort the reopen, and delete and free the staged changes in
1674 * reopen_state
1676 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1678 BlockDriver *drv;
1680 assert(reopen_state != NULL);
1681 drv = reopen_state->bs->drv;
1682 assert(drv != NULL);
1684 if (drv->bdrv_reopen_abort) {
1685 drv->bdrv_reopen_abort(reopen_state);
1690 void bdrv_close(BlockDriverState *bs)
1692 if (bs->job) {
1693 block_job_cancel_sync(bs->job);
1695 bdrv_drain_all(); /* complete I/O */
1696 bdrv_flush(bs);
1697 bdrv_drain_all(); /* in case flush left pending I/O */
1698 notifier_list_notify(&bs->close_notifiers, bs);
1700 if (bs->drv) {
1701 if (bs->backing_hd) {
1702 bdrv_unref(bs->backing_hd);
1703 bs->backing_hd = NULL;
1705 bs->drv->bdrv_close(bs);
1706 g_free(bs->opaque);
1707 #ifdef _WIN32
1708 if (bs->is_temporary) {
1709 unlink(bs->filename);
1711 #endif
1712 bs->opaque = NULL;
1713 bs->drv = NULL;
1714 bs->copy_on_read = 0;
1715 bs->backing_file[0] = '\0';
1716 bs->backing_format[0] = '\0';
1717 bs->total_sectors = 0;
1718 bs->encrypted = 0;
1719 bs->valid_key = 0;
1720 bs->sg = 0;
1721 bs->growable = 0;
1722 bs->zero_beyond_eof = false;
1723 QDECREF(bs->options);
1724 bs->options = NULL;
1726 if (bs->file != NULL) {
1727 bdrv_unref(bs->file);
1728 bs->file = NULL;
1732 bdrv_dev_change_media_cb(bs, false);
1734 /*throttling disk I/O limits*/
1735 if (bs->io_limits_enabled) {
1736 bdrv_io_limits_disable(bs);
1740 void bdrv_close_all(void)
1742 BlockDriverState *bs;
1744 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1745 bdrv_close(bs);
1749 /* Check if any requests are in-flight (including throttled requests) */
1750 static bool bdrv_requests_pending(BlockDriverState *bs)
1752 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1753 return true;
1755 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1756 return true;
1758 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1759 return true;
1761 if (bs->file && bdrv_requests_pending(bs->file)) {
1762 return true;
1764 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1765 return true;
1767 return false;
1770 static bool bdrv_requests_pending_all(void)
1772 BlockDriverState *bs;
1773 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1774 if (bdrv_requests_pending(bs)) {
1775 return true;
1778 return false;
1782 * Wait for pending requests to complete across all BlockDriverStates
1784 * This function does not flush data to disk, use bdrv_flush_all() for that
1785 * after calling this function.
1787 * Note that completion of an asynchronous I/O operation can trigger any
1788 * number of other I/O operations on other devices---for example a coroutine
1789 * can be arbitrarily complex and a constant flow of I/O can come until the
1790 * coroutine is complete. Because of this, it is not possible to have a
1791 * function to drain a single device's I/O queue.
1793 void bdrv_drain_all(void)
1795 /* Always run first iteration so any pending completion BHs run */
1796 bool busy = true;
1797 BlockDriverState *bs;
1799 while (busy) {
1800 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1801 bdrv_start_throttled_reqs(bs);
1804 busy = bdrv_requests_pending_all();
1805 busy |= aio_poll(qemu_get_aio_context(), busy);
1809 /* make a BlockDriverState anonymous by removing from bdrv_state and
1810 * graph_bdrv_state list.
1811 Also, NULL terminate the device_name to prevent double remove */
1812 void bdrv_make_anon(BlockDriverState *bs)
1814 if (bs->device_name[0] != '\0') {
1815 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1817 bs->device_name[0] = '\0';
1818 if (bs->node_name[0] != '\0') {
1819 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1821 bs->node_name[0] = '\0';
1824 static void bdrv_rebind(BlockDriverState *bs)
1826 if (bs->drv && bs->drv->bdrv_rebind) {
1827 bs->drv->bdrv_rebind(bs);
1831 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1832 BlockDriverState *bs_src)
1834 /* move some fields that need to stay attached to the device */
1835 bs_dest->open_flags = bs_src->open_flags;
1837 /* dev info */
1838 bs_dest->dev_ops = bs_src->dev_ops;
1839 bs_dest->dev_opaque = bs_src->dev_opaque;
1840 bs_dest->dev = bs_src->dev;
1841 bs_dest->guest_block_size = bs_src->guest_block_size;
1842 bs_dest->copy_on_read = bs_src->copy_on_read;
1844 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1846 /* i/o throttled req */
1847 memcpy(&bs_dest->throttle_state,
1848 &bs_src->throttle_state,
1849 sizeof(ThrottleState));
1850 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1851 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1852 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1854 /* r/w error */
1855 bs_dest->on_read_error = bs_src->on_read_error;
1856 bs_dest->on_write_error = bs_src->on_write_error;
1858 /* i/o status */
1859 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1860 bs_dest->iostatus = bs_src->iostatus;
1862 /* dirty bitmap */
1863 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1865 /* reference count */
1866 bs_dest->refcnt = bs_src->refcnt;
1868 /* job */
1869 bs_dest->in_use = bs_src->in_use;
1870 bs_dest->job = bs_src->job;
1872 /* keep the same entry in bdrv_states */
1873 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1874 bs_src->device_name);
1875 bs_dest->device_list = bs_src->device_list;
1879 * Swap bs contents for two image chains while they are live,
1880 * while keeping required fields on the BlockDriverState that is
1881 * actually attached to a device.
1883 * This will modify the BlockDriverState fields, and swap contents
1884 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1886 * bs_new is required to be anonymous.
1888 * This function does not create any image files.
1890 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1892 BlockDriverState tmp;
1894 /* The code needs to swap the node_name but simply swapping node_list won't
1895 * work so first remove the nodes from the graph list, do the swap then
1896 * insert them back if needed.
1898 if (bs_new->node_name[0] != '\0') {
1899 QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
1901 if (bs_old->node_name[0] != '\0') {
1902 QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
1905 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1906 assert(bs_new->device_name[0] == '\0');
1907 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
1908 assert(bs_new->job == NULL);
1909 assert(bs_new->dev == NULL);
1910 assert(bs_new->in_use == 0);
1911 assert(bs_new->io_limits_enabled == false);
1912 assert(!throttle_have_timer(&bs_new->throttle_state));
1914 tmp = *bs_new;
1915 *bs_new = *bs_old;
1916 *bs_old = tmp;
1918 /* there are some fields that should not be swapped, move them back */
1919 bdrv_move_feature_fields(&tmp, bs_old);
1920 bdrv_move_feature_fields(bs_old, bs_new);
1921 bdrv_move_feature_fields(bs_new, &tmp);
1923 /* bs_new shouldn't be in bdrv_states even after the swap! */
1924 assert(bs_new->device_name[0] == '\0');
1926 /* Check a few fields that should remain attached to the device */
1927 assert(bs_new->dev == NULL);
1928 assert(bs_new->job == NULL);
1929 assert(bs_new->in_use == 0);
1930 assert(bs_new->io_limits_enabled == false);
1931 assert(!throttle_have_timer(&bs_new->throttle_state));
1933 /* insert the nodes back into the graph node list if needed */
1934 if (bs_new->node_name[0] != '\0') {
1935 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
1937 if (bs_old->node_name[0] != '\0') {
1938 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
1941 bdrv_rebind(bs_new);
1942 bdrv_rebind(bs_old);
1946 * Add new bs contents at the top of an image chain while the chain is
1947 * live, while keeping required fields on the top layer.
1949 * This will modify the BlockDriverState fields, and swap contents
1950 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1952 * bs_new is required to be anonymous.
1954 * This function does not create any image files.
1956 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1958 bdrv_swap(bs_new, bs_top);
1960 /* The contents of 'tmp' will become bs_top, as we are
1961 * swapping bs_new and bs_top contents. */
1962 bs_top->backing_hd = bs_new;
1963 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1964 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1965 bs_new->filename);
1966 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1967 bs_new->drv ? bs_new->drv->format_name : "");
1970 static void bdrv_delete(BlockDriverState *bs)
1972 assert(!bs->dev);
1973 assert(!bs->job);
1974 assert(!bs->in_use);
1975 assert(!bs->refcnt);
1976 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
1978 bdrv_close(bs);
1980 /* remove from list, if necessary */
1981 bdrv_make_anon(bs);
1983 g_free(bs);
1986 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1987 /* TODO change to DeviceState *dev when all users are qdevified */
1989 if (bs->dev) {
1990 return -EBUSY;
1992 bs->dev = dev;
1993 bdrv_iostatus_reset(bs);
1994 return 0;
1997 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1998 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
2000 if (bdrv_attach_dev(bs, dev) < 0) {
2001 abort();
2005 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
2006 /* TODO change to DeviceState *dev when all users are qdevified */
2008 assert(bs->dev == dev);
2009 bs->dev = NULL;
2010 bs->dev_ops = NULL;
2011 bs->dev_opaque = NULL;
2012 bs->guest_block_size = 512;
2015 /* TODO change to return DeviceState * when all users are qdevified */
2016 void *bdrv_get_attached_dev(BlockDriverState *bs)
2018 return bs->dev;
2021 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2022 void *opaque)
2024 bs->dev_ops = ops;
2025 bs->dev_opaque = opaque;
2028 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
2029 enum MonitorEvent ev,
2030 BlockErrorAction action, bool is_read)
2032 QObject *data;
2033 const char *action_str;
2035 switch (action) {
2036 case BDRV_ACTION_REPORT:
2037 action_str = "report";
2038 break;
2039 case BDRV_ACTION_IGNORE:
2040 action_str = "ignore";
2041 break;
2042 case BDRV_ACTION_STOP:
2043 action_str = "stop";
2044 break;
2045 default:
2046 abort();
2049 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
2050 bdrv->device_name,
2051 action_str,
2052 is_read ? "read" : "write");
2053 monitor_protocol_event(ev, data);
2055 qobject_decref(data);
2058 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
2060 QObject *data;
2062 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2063 bdrv_get_device_name(bs), ejected);
2064 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
2066 qobject_decref(data);
2069 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2071 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2072 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2073 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2074 if (tray_was_closed) {
2075 /* tray open */
2076 bdrv_emit_qmp_eject_event(bs, true);
2078 if (load) {
2079 /* tray close */
2080 bdrv_emit_qmp_eject_event(bs, false);
2085 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2087 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2090 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2092 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2093 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2097 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2099 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2100 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2102 return false;
2105 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2107 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2108 bs->dev_ops->resize_cb(bs->dev_opaque);
2112 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2114 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2115 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2117 return false;
2121 * Run consistency checks on an image
2123 * Returns 0 if the check could be completed (it doesn't mean that the image is
2124 * free of errors) or -errno when an internal error occurred. The results of the
2125 * check are stored in res.
2127 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2129 if (bs->drv->bdrv_check == NULL) {
2130 return -ENOTSUP;
2133 memset(res, 0, sizeof(*res));
2134 return bs->drv->bdrv_check(bs, res, fix);
2137 #define COMMIT_BUF_SECTORS 2048
2139 /* commit COW file into the raw image */
2140 int bdrv_commit(BlockDriverState *bs)
2142 BlockDriver *drv = bs->drv;
2143 int64_t sector, total_sectors, length, backing_length;
2144 int n, ro, open_flags;
2145 int ret = 0;
2146 uint8_t *buf = NULL;
2147 char filename[PATH_MAX];
2149 if (!drv)
2150 return -ENOMEDIUM;
2152 if (!bs->backing_hd) {
2153 return -ENOTSUP;
2156 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
2157 return -EBUSY;
2160 ro = bs->backing_hd->read_only;
2161 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2162 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2163 open_flags = bs->backing_hd->open_flags;
2165 if (ro) {
2166 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2167 return -EACCES;
2171 length = bdrv_getlength(bs);
2172 if (length < 0) {
2173 ret = length;
2174 goto ro_cleanup;
2177 backing_length = bdrv_getlength(bs->backing_hd);
2178 if (backing_length < 0) {
2179 ret = backing_length;
2180 goto ro_cleanup;
2183 /* If our top snapshot is larger than the backing file image,
2184 * grow the backing file image if possible. If not possible,
2185 * we must return an error */
2186 if (length > backing_length) {
2187 ret = bdrv_truncate(bs->backing_hd, length);
2188 if (ret < 0) {
2189 goto ro_cleanup;
2193 total_sectors = length >> BDRV_SECTOR_BITS;
2194 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2196 for (sector = 0; sector < total_sectors; sector += n) {
2197 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2198 if (ret < 0) {
2199 goto ro_cleanup;
2201 if (ret) {
2202 ret = bdrv_read(bs, sector, buf, n);
2203 if (ret < 0) {
2204 goto ro_cleanup;
2207 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2208 if (ret < 0) {
2209 goto ro_cleanup;
2214 if (drv->bdrv_make_empty) {
2215 ret = drv->bdrv_make_empty(bs);
2216 if (ret < 0) {
2217 goto ro_cleanup;
2219 bdrv_flush(bs);
2223 * Make sure all data we wrote to the backing device is actually
2224 * stable on disk.
2226 if (bs->backing_hd) {
2227 bdrv_flush(bs->backing_hd);
2230 ret = 0;
2231 ro_cleanup:
2232 g_free(buf);
2234 if (ro) {
2235 /* ignoring error return here */
2236 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2239 return ret;
2242 int bdrv_commit_all(void)
2244 BlockDriverState *bs;
2246 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2247 if (bs->drv && bs->backing_hd) {
2248 int ret = bdrv_commit(bs);
2249 if (ret < 0) {
2250 return ret;
2254 return 0;
2258 * Remove an active request from the tracked requests list
2260 * This function should be called when a tracked request is completing.
2262 static void tracked_request_end(BdrvTrackedRequest *req)
2264 if (req->serialising) {
2265 req->bs->serialising_in_flight--;
2268 QLIST_REMOVE(req, list);
2269 qemu_co_queue_restart_all(&req->wait_queue);
2273 * Add an active request to the tracked requests list
2275 static void tracked_request_begin(BdrvTrackedRequest *req,
2276 BlockDriverState *bs,
2277 int64_t offset,
2278 unsigned int bytes, bool is_write)
2280 *req = (BdrvTrackedRequest){
2281 .bs = bs,
2282 .offset = offset,
2283 .bytes = bytes,
2284 .is_write = is_write,
2285 .co = qemu_coroutine_self(),
2286 .serialising = false,
2287 .overlap_offset = offset,
2288 .overlap_bytes = bytes,
2291 qemu_co_queue_init(&req->wait_queue);
2293 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2296 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2298 int64_t overlap_offset = req->offset & ~(align - 1);
2299 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2300 - overlap_offset;
2302 if (!req->serialising) {
2303 req->bs->serialising_in_flight++;
2304 req->serialising = true;
2307 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2308 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2312 * Round a region to cluster boundaries
2314 void bdrv_round_to_clusters(BlockDriverState *bs,
2315 int64_t sector_num, int nb_sectors,
2316 int64_t *cluster_sector_num,
2317 int *cluster_nb_sectors)
2319 BlockDriverInfo bdi;
2321 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2322 *cluster_sector_num = sector_num;
2323 *cluster_nb_sectors = nb_sectors;
2324 } else {
2325 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2326 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2327 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2328 nb_sectors, c);
2332 static int bdrv_get_cluster_size(BlockDriverState *bs)
2334 BlockDriverInfo bdi;
2335 int ret;
2337 ret = bdrv_get_info(bs, &bdi);
2338 if (ret < 0 || bdi.cluster_size == 0) {
2339 return bs->request_alignment;
2340 } else {
2341 return bdi.cluster_size;
2345 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2346 int64_t offset, unsigned int bytes)
2348 /* aaaa bbbb */
2349 if (offset >= req->overlap_offset + req->overlap_bytes) {
2350 return false;
2352 /* bbbb aaaa */
2353 if (req->overlap_offset >= offset + bytes) {
2354 return false;
2356 return true;
2359 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2361 BlockDriverState *bs = self->bs;
2362 BdrvTrackedRequest *req;
2363 bool retry;
2364 bool waited = false;
2366 if (!bs->serialising_in_flight) {
2367 return false;
2370 do {
2371 retry = false;
2372 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2373 if (req == self || (!req->serialising && !self->serialising)) {
2374 continue;
2376 if (tracked_request_overlaps(req, self->overlap_offset,
2377 self->overlap_bytes))
2379 /* Hitting this means there was a reentrant request, for
2380 * example, a block driver issuing nested requests. This must
2381 * never happen since it means deadlock.
2383 assert(qemu_coroutine_self() != req->co);
2385 /* If the request is already (indirectly) waiting for us, or
2386 * will wait for us as soon as it wakes up, then just go on
2387 * (instead of producing a deadlock in the former case). */
2388 if (!req->waiting_for) {
2389 self->waiting_for = req;
2390 qemu_co_queue_wait(&req->wait_queue);
2391 self->waiting_for = NULL;
2392 retry = true;
2393 waited = true;
2394 break;
2398 } while (retry);
2400 return waited;
2404 * Return values:
2405 * 0 - success
2406 * -EINVAL - backing format specified, but no file
2407 * -ENOSPC - can't update the backing file because no space is left in the
2408 * image file header
2409 * -ENOTSUP - format driver doesn't support changing the backing file
2411 int bdrv_change_backing_file(BlockDriverState *bs,
2412 const char *backing_file, const char *backing_fmt)
2414 BlockDriver *drv = bs->drv;
2415 int ret;
2417 /* Backing file format doesn't make sense without a backing file */
2418 if (backing_fmt && !backing_file) {
2419 return -EINVAL;
2422 if (drv->bdrv_change_backing_file != NULL) {
2423 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2424 } else {
2425 ret = -ENOTSUP;
2428 if (ret == 0) {
2429 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2430 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2432 return ret;
2436 * Finds the image layer in the chain that has 'bs' as its backing file.
2438 * active is the current topmost image.
2440 * Returns NULL if bs is not found in active's image chain,
2441 * or if active == bs.
2443 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2444 BlockDriverState *bs)
2446 BlockDriverState *overlay = NULL;
2447 BlockDriverState *intermediate;
2449 assert(active != NULL);
2450 assert(bs != NULL);
2452 /* if bs is the same as active, then by definition it has no overlay
2454 if (active == bs) {
2455 return NULL;
2458 intermediate = active;
2459 while (intermediate->backing_hd) {
2460 if (intermediate->backing_hd == bs) {
2461 overlay = intermediate;
2462 break;
2464 intermediate = intermediate->backing_hd;
2467 return overlay;
2470 typedef struct BlkIntermediateStates {
2471 BlockDriverState *bs;
2472 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2473 } BlkIntermediateStates;
2477 * Drops images above 'base' up to and including 'top', and sets the image
2478 * above 'top' to have base as its backing file.
2480 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2481 * information in 'bs' can be properly updated.
2483 * E.g., this will convert the following chain:
2484 * bottom <- base <- intermediate <- top <- active
2486 * to
2488 * bottom <- base <- active
2490 * It is allowed for bottom==base, in which case it converts:
2492 * base <- intermediate <- top <- active
2494 * to
2496 * base <- active
2498 * Error conditions:
2499 * if active == top, that is considered an error
2502 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2503 BlockDriverState *base)
2505 BlockDriverState *intermediate;
2506 BlockDriverState *base_bs = NULL;
2507 BlockDriverState *new_top_bs = NULL;
2508 BlkIntermediateStates *intermediate_state, *next;
2509 int ret = -EIO;
2511 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2512 QSIMPLEQ_INIT(&states_to_delete);
2514 if (!top->drv || !base->drv) {
2515 goto exit;
2518 new_top_bs = bdrv_find_overlay(active, top);
2520 if (new_top_bs == NULL) {
2521 /* we could not find the image above 'top', this is an error */
2522 goto exit;
2525 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2526 * to do, no intermediate images */
2527 if (new_top_bs->backing_hd == base) {
2528 ret = 0;
2529 goto exit;
2532 intermediate = top;
2534 /* now we will go down through the list, and add each BDS we find
2535 * into our deletion queue, until we hit the 'base'
2537 while (intermediate) {
2538 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2539 intermediate_state->bs = intermediate;
2540 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2542 if (intermediate->backing_hd == base) {
2543 base_bs = intermediate->backing_hd;
2544 break;
2546 intermediate = intermediate->backing_hd;
2548 if (base_bs == NULL) {
2549 /* something went wrong, we did not end at the base. safely
2550 * unravel everything, and exit with error */
2551 goto exit;
2554 /* success - we can delete the intermediate states, and link top->base */
2555 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2556 base_bs->drv ? base_bs->drv->format_name : "");
2557 if (ret) {
2558 goto exit;
2560 new_top_bs->backing_hd = base_bs;
2562 bdrv_refresh_limits(new_top_bs);
2564 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2565 /* so that bdrv_close() does not recursively close the chain */
2566 intermediate_state->bs->backing_hd = NULL;
2567 bdrv_unref(intermediate_state->bs);
2569 ret = 0;
2571 exit:
2572 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2573 g_free(intermediate_state);
2575 return ret;
2579 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2580 size_t size)
2582 int64_t len;
2584 if (!bdrv_is_inserted(bs))
2585 return -ENOMEDIUM;
2587 if (bs->growable)
2588 return 0;
2590 len = bdrv_getlength(bs);
2592 if (offset < 0)
2593 return -EIO;
2595 if ((offset > len) || (len - offset < size))
2596 return -EIO;
2598 return 0;
2601 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2602 int nb_sectors)
2604 if (nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2605 return -EIO;
2608 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2609 nb_sectors * BDRV_SECTOR_SIZE);
2612 typedef struct RwCo {
2613 BlockDriverState *bs;
2614 int64_t offset;
2615 QEMUIOVector *qiov;
2616 bool is_write;
2617 int ret;
2618 BdrvRequestFlags flags;
2619 } RwCo;
2621 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2623 RwCo *rwco = opaque;
2625 if (!rwco->is_write) {
2626 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2627 rwco->qiov->size, rwco->qiov,
2628 rwco->flags);
2629 } else {
2630 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2631 rwco->qiov->size, rwco->qiov,
2632 rwco->flags);
2637 * Process a vectored synchronous request using coroutines
2639 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2640 QEMUIOVector *qiov, bool is_write,
2641 BdrvRequestFlags flags)
2643 Coroutine *co;
2644 RwCo rwco = {
2645 .bs = bs,
2646 .offset = offset,
2647 .qiov = qiov,
2648 .is_write = is_write,
2649 .ret = NOT_DONE,
2650 .flags = flags,
2654 * In sync call context, when the vcpu is blocked, this throttling timer
2655 * will not fire; so the I/O throttling function has to be disabled here
2656 * if it has been enabled.
2658 if (bs->io_limits_enabled) {
2659 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2660 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2661 bdrv_io_limits_disable(bs);
2664 if (qemu_in_coroutine()) {
2665 /* Fast-path if already in coroutine context */
2666 bdrv_rw_co_entry(&rwco);
2667 } else {
2668 co = qemu_coroutine_create(bdrv_rw_co_entry);
2669 qemu_coroutine_enter(co, &rwco);
2670 while (rwco.ret == NOT_DONE) {
2671 qemu_aio_wait();
2674 return rwco.ret;
2678 * Process a synchronous request using coroutines
2680 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2681 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2683 QEMUIOVector qiov;
2684 struct iovec iov = {
2685 .iov_base = (void *)buf,
2686 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2689 qemu_iovec_init_external(&qiov, &iov, 1);
2690 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2691 &qiov, is_write, flags);
2694 /* return < 0 if error. See bdrv_write() for the return codes */
2695 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2696 uint8_t *buf, int nb_sectors)
2698 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2701 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2702 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2703 uint8_t *buf, int nb_sectors)
2705 bool enabled;
2706 int ret;
2708 enabled = bs->io_limits_enabled;
2709 bs->io_limits_enabled = false;
2710 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2711 bs->io_limits_enabled = enabled;
2712 return ret;
2715 /* Return < 0 if error. Important errors are:
2716 -EIO generic I/O error (may happen for all errors)
2717 -ENOMEDIUM No media inserted.
2718 -EINVAL Invalid sector number or nb_sectors
2719 -EACCES Trying to write a read-only device
2721 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2722 const uint8_t *buf, int nb_sectors)
2724 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2727 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2728 int nb_sectors, BdrvRequestFlags flags)
2730 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2731 BDRV_REQ_ZERO_WRITE | flags);
2735 * Completely zero out a block device with the help of bdrv_write_zeroes.
2736 * The operation is sped up by checking the block status and only writing
2737 * zeroes to the device if they currently do not return zeroes. Optional
2738 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2740 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2742 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2744 int64_t target_size = bdrv_getlength(bs) / BDRV_SECTOR_SIZE;
2745 int64_t ret, nb_sectors, sector_num = 0;
2746 int n;
2748 for (;;) {
2749 nb_sectors = target_size - sector_num;
2750 if (nb_sectors <= 0) {
2751 return 0;
2753 if (nb_sectors > INT_MAX) {
2754 nb_sectors = INT_MAX;
2756 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2757 if (ret < 0) {
2758 error_report("error getting block status at sector %" PRId64 ": %s",
2759 sector_num, strerror(-ret));
2760 return ret;
2762 if (ret & BDRV_BLOCK_ZERO) {
2763 sector_num += n;
2764 continue;
2766 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2767 if (ret < 0) {
2768 error_report("error writing zeroes at sector %" PRId64 ": %s",
2769 sector_num, strerror(-ret));
2770 return ret;
2772 sector_num += n;
2776 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2778 QEMUIOVector qiov;
2779 struct iovec iov = {
2780 .iov_base = (void *)buf,
2781 .iov_len = bytes,
2783 int ret;
2785 if (bytes < 0) {
2786 return -EINVAL;
2789 qemu_iovec_init_external(&qiov, &iov, 1);
2790 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2791 if (ret < 0) {
2792 return ret;
2795 return bytes;
2798 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2800 int ret;
2802 ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2803 if (ret < 0) {
2804 return ret;
2807 return qiov->size;
2810 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2811 const void *buf, int bytes)
2813 QEMUIOVector qiov;
2814 struct iovec iov = {
2815 .iov_base = (void *) buf,
2816 .iov_len = bytes,
2819 if (bytes < 0) {
2820 return -EINVAL;
2823 qemu_iovec_init_external(&qiov, &iov, 1);
2824 return bdrv_pwritev(bs, offset, &qiov);
2828 * Writes to the file and ensures that no writes are reordered across this
2829 * request (acts as a barrier)
2831 * Returns 0 on success, -errno in error cases.
2833 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2834 const void *buf, int count)
2836 int ret;
2838 ret = bdrv_pwrite(bs, offset, buf, count);
2839 if (ret < 0) {
2840 return ret;
2843 /* No flush needed for cache modes that already do it */
2844 if (bs->enable_write_cache) {
2845 bdrv_flush(bs);
2848 return 0;
2851 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2852 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2854 /* Perform I/O through a temporary buffer so that users who scribble over
2855 * their read buffer while the operation is in progress do not end up
2856 * modifying the image file. This is critical for zero-copy guest I/O
2857 * where anything might happen inside guest memory.
2859 void *bounce_buffer;
2861 BlockDriver *drv = bs->drv;
2862 struct iovec iov;
2863 QEMUIOVector bounce_qiov;
2864 int64_t cluster_sector_num;
2865 int cluster_nb_sectors;
2866 size_t skip_bytes;
2867 int ret;
2869 /* Cover entire cluster so no additional backing file I/O is required when
2870 * allocating cluster in the image file.
2872 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2873 &cluster_sector_num, &cluster_nb_sectors);
2875 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2876 cluster_sector_num, cluster_nb_sectors);
2878 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2879 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2880 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2882 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2883 &bounce_qiov);
2884 if (ret < 0) {
2885 goto err;
2888 if (drv->bdrv_co_write_zeroes &&
2889 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2890 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2891 cluster_nb_sectors, 0);
2892 } else {
2893 /* This does not change the data on the disk, it is not necessary
2894 * to flush even in cache=writethrough mode.
2896 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2897 &bounce_qiov);
2900 if (ret < 0) {
2901 /* It might be okay to ignore write errors for guest requests. If this
2902 * is a deliberate copy-on-read then we don't want to ignore the error.
2903 * Simply report it in all cases.
2905 goto err;
2908 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2909 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2910 nb_sectors * BDRV_SECTOR_SIZE);
2912 err:
2913 qemu_vfree(bounce_buffer);
2914 return ret;
2918 * Forwards an already correctly aligned request to the BlockDriver. This
2919 * handles copy on read and zeroing after EOF; any other features must be
2920 * implemented by the caller.
2922 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
2923 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
2924 int64_t align, QEMUIOVector *qiov, int flags)
2926 BlockDriver *drv = bs->drv;
2927 int ret;
2929 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
2930 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
2932 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
2933 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
2935 /* Handle Copy on Read and associated serialisation */
2936 if (flags & BDRV_REQ_COPY_ON_READ) {
2937 /* If we touch the same cluster it counts as an overlap. This
2938 * guarantees that allocating writes will be serialized and not race
2939 * with each other for the same cluster. For example, in copy-on-read
2940 * it ensures that the CoR read and write operations are atomic and
2941 * guest writes cannot interleave between them. */
2942 mark_request_serialising(req, bdrv_get_cluster_size(bs));
2945 wait_serialising_requests(req);
2947 if (flags & BDRV_REQ_COPY_ON_READ) {
2948 int pnum;
2950 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
2951 if (ret < 0) {
2952 goto out;
2955 if (!ret || pnum != nb_sectors) {
2956 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2957 goto out;
2961 /* Forward the request to the BlockDriver */
2962 if (!(bs->zero_beyond_eof && bs->growable)) {
2963 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2964 } else {
2965 /* Read zeros after EOF of growable BDSes */
2966 int64_t len, total_sectors, max_nb_sectors;
2968 len = bdrv_getlength(bs);
2969 if (len < 0) {
2970 ret = len;
2971 goto out;
2974 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
2975 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
2976 align >> BDRV_SECTOR_BITS);
2977 if (max_nb_sectors > 0) {
2978 ret = drv->bdrv_co_readv(bs, sector_num,
2979 MIN(nb_sectors, max_nb_sectors), qiov);
2980 } else {
2981 ret = 0;
2984 /* Reading beyond end of file is supposed to produce zeroes */
2985 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
2986 uint64_t offset = MAX(0, total_sectors - sector_num);
2987 uint64_t bytes = (sector_num + nb_sectors - offset) *
2988 BDRV_SECTOR_SIZE;
2989 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
2993 out:
2994 return ret;
2998 * Handle a read request in coroutine context
3000 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3001 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3002 BdrvRequestFlags flags)
3004 BlockDriver *drv = bs->drv;
3005 BdrvTrackedRequest req;
3007 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3008 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3009 uint8_t *head_buf = NULL;
3010 uint8_t *tail_buf = NULL;
3011 QEMUIOVector local_qiov;
3012 bool use_local_qiov = false;
3013 int ret;
3015 if (!drv) {
3016 return -ENOMEDIUM;
3018 if (bdrv_check_byte_request(bs, offset, bytes)) {
3019 return -EIO;
3022 if (bs->copy_on_read) {
3023 flags |= BDRV_REQ_COPY_ON_READ;
3026 /* throttling disk I/O */
3027 if (bs->io_limits_enabled) {
3028 bdrv_io_limits_intercept(bs, bytes, false);
3031 /* Align read if necessary by padding qiov */
3032 if (offset & (align - 1)) {
3033 head_buf = qemu_blockalign(bs, align);
3034 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3035 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3036 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3037 use_local_qiov = true;
3039 bytes += offset & (align - 1);
3040 offset = offset & ~(align - 1);
3043 if ((offset + bytes) & (align - 1)) {
3044 if (!use_local_qiov) {
3045 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3046 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3047 use_local_qiov = true;
3049 tail_buf = qemu_blockalign(bs, align);
3050 qemu_iovec_add(&local_qiov, tail_buf,
3051 align - ((offset + bytes) & (align - 1)));
3053 bytes = ROUND_UP(bytes, align);
3056 tracked_request_begin(&req, bs, offset, bytes, false);
3057 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3058 use_local_qiov ? &local_qiov : qiov,
3059 flags);
3060 tracked_request_end(&req);
3062 if (use_local_qiov) {
3063 qemu_iovec_destroy(&local_qiov);
3064 qemu_vfree(head_buf);
3065 qemu_vfree(tail_buf);
3068 return ret;
3071 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3072 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3073 BdrvRequestFlags flags)
3075 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3076 return -EINVAL;
3079 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3080 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3083 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3084 int nb_sectors, QEMUIOVector *qiov)
3086 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3088 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3091 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3092 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3094 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3096 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3097 BDRV_REQ_COPY_ON_READ);
3100 /* if no limit is specified in the BlockLimits use a default
3101 * of 32768 512-byte sectors (16 MiB) per request.
3103 #define MAX_WRITE_ZEROES_DEFAULT 32768
3105 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3106 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3108 BlockDriver *drv = bs->drv;
3109 QEMUIOVector qiov;
3110 struct iovec iov = {0};
3111 int ret = 0;
3113 int max_write_zeroes = bs->bl.max_write_zeroes ?
3114 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3116 while (nb_sectors > 0 && !ret) {
3117 int num = nb_sectors;
3119 /* Align request. Block drivers can expect the "bulk" of the request
3120 * to be aligned.
3122 if (bs->bl.write_zeroes_alignment
3123 && num > bs->bl.write_zeroes_alignment) {
3124 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3125 /* Make a small request up to the first aligned sector. */
3126 num = bs->bl.write_zeroes_alignment;
3127 num -= sector_num % bs->bl.write_zeroes_alignment;
3128 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3129 /* Shorten the request to the last aligned sector. num cannot
3130 * underflow because num > bs->bl.write_zeroes_alignment.
3132 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3136 /* limit request size */
3137 if (num > max_write_zeroes) {
3138 num = max_write_zeroes;
3141 ret = -ENOTSUP;
3142 /* First try the efficient write zeroes operation */
3143 if (drv->bdrv_co_write_zeroes) {
3144 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3147 if (ret == -ENOTSUP) {
3148 /* Fall back to bounce buffer if write zeroes is unsupported */
3149 iov.iov_len = num * BDRV_SECTOR_SIZE;
3150 if (iov.iov_base == NULL) {
3151 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3152 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3154 qemu_iovec_init_external(&qiov, &iov, 1);
3156 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3158 /* Keep bounce buffer around if it is big enough for all
3159 * all future requests.
3161 if (num < max_write_zeroes) {
3162 qemu_vfree(iov.iov_base);
3163 iov.iov_base = NULL;
3167 sector_num += num;
3168 nb_sectors -= num;
3171 qemu_vfree(iov.iov_base);
3172 return ret;
3176 * Forwards an already correctly aligned write request to the BlockDriver.
3178 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3179 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3180 QEMUIOVector *qiov, int flags)
3182 BlockDriver *drv = bs->drv;
3183 bool waited;
3184 int ret;
3186 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3187 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3189 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3190 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3192 waited = wait_serialising_requests(req);
3193 assert(!waited || !req->serialising);
3194 assert(req->overlap_offset <= offset);
3195 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3197 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3199 if (ret < 0) {
3200 /* Do nothing, write notifier decided to fail this request */
3201 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3202 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3203 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3204 } else {
3205 BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3206 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3208 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3210 if (ret == 0 && !bs->enable_write_cache) {
3211 ret = bdrv_co_flush(bs);
3214 bdrv_set_dirty(bs, sector_num, nb_sectors);
3216 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3217 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3219 if (bs->growable && ret >= 0) {
3220 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3223 return ret;
3227 * Handle a write request in coroutine context
3229 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3230 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3231 BdrvRequestFlags flags)
3233 BdrvTrackedRequest req;
3234 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3235 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3236 uint8_t *head_buf = NULL;
3237 uint8_t *tail_buf = NULL;
3238 QEMUIOVector local_qiov;
3239 bool use_local_qiov = false;
3240 int ret;
3242 if (!bs->drv) {
3243 return -ENOMEDIUM;
3245 if (bs->read_only) {
3246 return -EACCES;
3248 if (bdrv_check_byte_request(bs, offset, bytes)) {
3249 return -EIO;
3252 /* throttling disk I/O */
3253 if (bs->io_limits_enabled) {
3254 bdrv_io_limits_intercept(bs, bytes, true);
3258 * Align write if necessary by performing a read-modify-write cycle.
3259 * Pad qiov with the read parts and be sure to have a tracked request not
3260 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3262 tracked_request_begin(&req, bs, offset, bytes, true);
3264 if (offset & (align - 1)) {
3265 QEMUIOVector head_qiov;
3266 struct iovec head_iov;
3268 mark_request_serialising(&req, align);
3269 wait_serialising_requests(&req);
3271 head_buf = qemu_blockalign(bs, align);
3272 head_iov = (struct iovec) {
3273 .iov_base = head_buf,
3274 .iov_len = align,
3276 qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3278 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3279 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3280 align, &head_qiov, 0);
3281 if (ret < 0) {
3282 goto fail;
3284 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3286 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3287 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3288 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3289 use_local_qiov = true;
3291 bytes += offset & (align - 1);
3292 offset = offset & ~(align - 1);
3295 if ((offset + bytes) & (align - 1)) {
3296 QEMUIOVector tail_qiov;
3297 struct iovec tail_iov;
3298 size_t tail_bytes;
3299 bool waited;
3301 mark_request_serialising(&req, align);
3302 waited = wait_serialising_requests(&req);
3303 assert(!waited || !use_local_qiov);
3305 tail_buf = qemu_blockalign(bs, align);
3306 tail_iov = (struct iovec) {
3307 .iov_base = tail_buf,
3308 .iov_len = align,
3310 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3312 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3313 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3314 align, &tail_qiov, 0);
3315 if (ret < 0) {
3316 goto fail;
3318 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3320 if (!use_local_qiov) {
3321 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3322 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3323 use_local_qiov = true;
3326 tail_bytes = (offset + bytes) & (align - 1);
3327 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3329 bytes = ROUND_UP(bytes, align);
3332 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3333 use_local_qiov ? &local_qiov : qiov,
3334 flags);
3336 fail:
3337 tracked_request_end(&req);
3339 if (use_local_qiov) {
3340 qemu_iovec_destroy(&local_qiov);
3342 qemu_vfree(head_buf);
3343 qemu_vfree(tail_buf);
3345 return ret;
3348 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3349 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3350 BdrvRequestFlags flags)
3352 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3353 return -EINVAL;
3356 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3357 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3360 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3361 int nb_sectors, QEMUIOVector *qiov)
3363 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3365 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3368 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3369 int64_t sector_num, int nb_sectors,
3370 BdrvRequestFlags flags)
3372 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3374 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3375 flags &= ~BDRV_REQ_MAY_UNMAP;
3378 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3379 BDRV_REQ_ZERO_WRITE | flags);
3383 * Truncate file to 'offset' bytes (needed only for file protocols)
3385 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3387 BlockDriver *drv = bs->drv;
3388 int ret;
3389 if (!drv)
3390 return -ENOMEDIUM;
3391 if (!drv->bdrv_truncate)
3392 return -ENOTSUP;
3393 if (bs->read_only)
3394 return -EACCES;
3395 if (bdrv_in_use(bs))
3396 return -EBUSY;
3397 ret = drv->bdrv_truncate(bs, offset);
3398 if (ret == 0) {
3399 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3400 bdrv_dev_resize_cb(bs);
3402 return ret;
3406 * Length of a allocated file in bytes. Sparse files are counted by actual
3407 * allocated space. Return < 0 if error or unknown.
3409 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3411 BlockDriver *drv = bs->drv;
3412 if (!drv) {
3413 return -ENOMEDIUM;
3415 if (drv->bdrv_get_allocated_file_size) {
3416 return drv->bdrv_get_allocated_file_size(bs);
3418 if (bs->file) {
3419 return bdrv_get_allocated_file_size(bs->file);
3421 return -ENOTSUP;
3425 * Length of a file in bytes. Return < 0 if error or unknown.
3427 int64_t bdrv_getlength(BlockDriverState *bs)
3429 BlockDriver *drv = bs->drv;
3430 if (!drv)
3431 return -ENOMEDIUM;
3433 if (drv->has_variable_length) {
3434 int ret = refresh_total_sectors(bs, bs->total_sectors);
3435 if (ret < 0) {
3436 return ret;
3439 return bs->total_sectors * BDRV_SECTOR_SIZE;
3442 /* return 0 as number of sectors if no device present or error */
3443 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3445 int64_t length;
3446 length = bdrv_getlength(bs);
3447 if (length < 0)
3448 length = 0;
3449 else
3450 length = length >> BDRV_SECTOR_BITS;
3451 *nb_sectors_ptr = length;
3454 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3455 BlockdevOnError on_write_error)
3457 bs->on_read_error = on_read_error;
3458 bs->on_write_error = on_write_error;
3461 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3463 return is_read ? bs->on_read_error : bs->on_write_error;
3466 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3468 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3470 switch (on_err) {
3471 case BLOCKDEV_ON_ERROR_ENOSPC:
3472 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
3473 case BLOCKDEV_ON_ERROR_STOP:
3474 return BDRV_ACTION_STOP;
3475 case BLOCKDEV_ON_ERROR_REPORT:
3476 return BDRV_ACTION_REPORT;
3477 case BLOCKDEV_ON_ERROR_IGNORE:
3478 return BDRV_ACTION_IGNORE;
3479 default:
3480 abort();
3484 /* This is done by device models because, while the block layer knows
3485 * about the error, it does not know whether an operation comes from
3486 * the device or the block layer (from a job, for example).
3488 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3489 bool is_read, int error)
3491 assert(error >= 0);
3492 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
3493 if (action == BDRV_ACTION_STOP) {
3494 vm_stop(RUN_STATE_IO_ERROR);
3495 bdrv_iostatus_set_err(bs, error);
3499 int bdrv_is_read_only(BlockDriverState *bs)
3501 return bs->read_only;
3504 int bdrv_is_sg(BlockDriverState *bs)
3506 return bs->sg;
3509 int bdrv_enable_write_cache(BlockDriverState *bs)
3511 return bs->enable_write_cache;
3514 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3516 bs->enable_write_cache = wce;
3518 /* so a reopen() will preserve wce */
3519 if (wce) {
3520 bs->open_flags |= BDRV_O_CACHE_WB;
3521 } else {
3522 bs->open_flags &= ~BDRV_O_CACHE_WB;
3526 int bdrv_is_encrypted(BlockDriverState *bs)
3528 if (bs->backing_hd && bs->backing_hd->encrypted)
3529 return 1;
3530 return bs->encrypted;
3533 int bdrv_key_required(BlockDriverState *bs)
3535 BlockDriverState *backing_hd = bs->backing_hd;
3537 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3538 return 1;
3539 return (bs->encrypted && !bs->valid_key);
3542 int bdrv_set_key(BlockDriverState *bs, const char *key)
3544 int ret;
3545 if (bs->backing_hd && bs->backing_hd->encrypted) {
3546 ret = bdrv_set_key(bs->backing_hd, key);
3547 if (ret < 0)
3548 return ret;
3549 if (!bs->encrypted)
3550 return 0;
3552 if (!bs->encrypted) {
3553 return -EINVAL;
3554 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3555 return -ENOMEDIUM;
3557 ret = bs->drv->bdrv_set_key(bs, key);
3558 if (ret < 0) {
3559 bs->valid_key = 0;
3560 } else if (!bs->valid_key) {
3561 bs->valid_key = 1;
3562 /* call the change callback now, we skipped it on open */
3563 bdrv_dev_change_media_cb(bs, true);
3565 return ret;
3568 const char *bdrv_get_format_name(BlockDriverState *bs)
3570 return bs->drv ? bs->drv->format_name : NULL;
3573 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3574 void *opaque)
3576 BlockDriver *drv;
3578 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3579 it(opaque, drv->format_name);
3583 /* This function is to find block backend bs */
3584 BlockDriverState *bdrv_find(const char *name)
3586 BlockDriverState *bs;
3588 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3589 if (!strcmp(name, bs->device_name)) {
3590 return bs;
3593 return NULL;
3596 /* This function is to find a node in the bs graph */
3597 BlockDriverState *bdrv_find_node(const char *node_name)
3599 BlockDriverState *bs;
3601 assert(node_name);
3603 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3604 if (!strcmp(node_name, bs->node_name)) {
3605 return bs;
3608 return NULL;
3611 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3612 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3614 BlockDeviceInfoList *list, *entry;
3615 BlockDriverState *bs;
3617 list = NULL;
3618 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3619 entry = g_malloc0(sizeof(*entry));
3620 entry->value = bdrv_block_device_info(bs);
3621 entry->next = list;
3622 list = entry;
3625 return list;
3628 BlockDriverState *bdrv_lookup_bs(const char *device,
3629 const char *node_name,
3630 Error **errp)
3632 BlockDriverState *bs = NULL;
3634 if (device) {
3635 bs = bdrv_find(device);
3637 if (bs) {
3638 return bs;
3642 if (node_name) {
3643 bs = bdrv_find_node(node_name);
3645 if (bs) {
3646 return bs;
3650 error_setg(errp, "Cannot find device=%s nor node_name=%s",
3651 device ? device : "",
3652 node_name ? node_name : "");
3653 return NULL;
3656 BlockDriverState *bdrv_next(BlockDriverState *bs)
3658 if (!bs) {
3659 return QTAILQ_FIRST(&bdrv_states);
3661 return QTAILQ_NEXT(bs, device_list);
3664 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3666 BlockDriverState *bs;
3668 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3669 it(opaque, bs);
3673 const char *bdrv_get_device_name(BlockDriverState *bs)
3675 return bs->device_name;
3678 int bdrv_get_flags(BlockDriverState *bs)
3680 return bs->open_flags;
3683 int bdrv_flush_all(void)
3685 BlockDriverState *bs;
3686 int result = 0;
3688 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3689 int ret = bdrv_flush(bs);
3690 if (ret < 0 && !result) {
3691 result = ret;
3695 return result;
3698 int bdrv_has_zero_init_1(BlockDriverState *bs)
3700 return 1;
3703 int bdrv_has_zero_init(BlockDriverState *bs)
3705 assert(bs->drv);
3707 /* If BS is a copy on write image, it is initialized to
3708 the contents of the base image, which may not be zeroes. */
3709 if (bs->backing_hd) {
3710 return 0;
3712 if (bs->drv->bdrv_has_zero_init) {
3713 return bs->drv->bdrv_has_zero_init(bs);
3716 /* safe default */
3717 return 0;
3720 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3722 BlockDriverInfo bdi;
3724 if (bs->backing_hd) {
3725 return false;
3728 if (bdrv_get_info(bs, &bdi) == 0) {
3729 return bdi.unallocated_blocks_are_zero;
3732 return false;
3735 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3737 BlockDriverInfo bdi;
3739 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3740 return false;
3743 if (bdrv_get_info(bs, &bdi) == 0) {
3744 return bdi.can_write_zeroes_with_unmap;
3747 return false;
3750 typedef struct BdrvCoGetBlockStatusData {
3751 BlockDriverState *bs;
3752 BlockDriverState *base;
3753 int64_t sector_num;
3754 int nb_sectors;
3755 int *pnum;
3756 int64_t ret;
3757 bool done;
3758 } BdrvCoGetBlockStatusData;
3761 * Returns true iff the specified sector is present in the disk image. Drivers
3762 * not implementing the functionality are assumed to not support backing files,
3763 * hence all their sectors are reported as allocated.
3765 * If 'sector_num' is beyond the end of the disk image the return value is 0
3766 * and 'pnum' is set to 0.
3768 * 'pnum' is set to the number of sectors (including and immediately following
3769 * the specified sector) that are known to be in the same
3770 * allocated/unallocated state.
3772 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3773 * beyond the end of the disk image it will be clamped.
3775 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3776 int64_t sector_num,
3777 int nb_sectors, int *pnum)
3779 int64_t length;
3780 int64_t n;
3781 int64_t ret, ret2;
3783 length = bdrv_getlength(bs);
3784 if (length < 0) {
3785 return length;
3788 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3789 *pnum = 0;
3790 return 0;
3793 n = bs->total_sectors - sector_num;
3794 if (n < nb_sectors) {
3795 nb_sectors = n;
3798 if (!bs->drv->bdrv_co_get_block_status) {
3799 *pnum = nb_sectors;
3800 ret = BDRV_BLOCK_DATA;
3801 if (bs->drv->protocol_name) {
3802 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3804 return ret;
3807 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3808 if (ret < 0) {
3809 *pnum = 0;
3810 return ret;
3813 if (ret & BDRV_BLOCK_RAW) {
3814 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3815 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3816 *pnum, pnum);
3819 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3820 if (bdrv_unallocated_blocks_are_zero(bs)) {
3821 ret |= BDRV_BLOCK_ZERO;
3822 } else if (bs->backing_hd) {
3823 BlockDriverState *bs2 = bs->backing_hd;
3824 int64_t length2 = bdrv_getlength(bs2);
3825 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3826 ret |= BDRV_BLOCK_ZERO;
3831 if (bs->file &&
3832 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3833 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3834 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3835 *pnum, pnum);
3836 if (ret2 >= 0) {
3837 /* Ignore errors. This is just providing extra information, it
3838 * is useful but not necessary.
3840 ret |= (ret2 & BDRV_BLOCK_ZERO);
3844 return ret;
3847 /* Coroutine wrapper for bdrv_get_block_status() */
3848 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3850 BdrvCoGetBlockStatusData *data = opaque;
3851 BlockDriverState *bs = data->bs;
3853 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3854 data->pnum);
3855 data->done = true;
3859 * Synchronous wrapper around bdrv_co_get_block_status().
3861 * See bdrv_co_get_block_status() for details.
3863 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
3864 int nb_sectors, int *pnum)
3866 Coroutine *co;
3867 BdrvCoGetBlockStatusData data = {
3868 .bs = bs,
3869 .sector_num = sector_num,
3870 .nb_sectors = nb_sectors,
3871 .pnum = pnum,
3872 .done = false,
3875 if (qemu_in_coroutine()) {
3876 /* Fast-path if already in coroutine context */
3877 bdrv_get_block_status_co_entry(&data);
3878 } else {
3879 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
3880 qemu_coroutine_enter(co, &data);
3881 while (!data.done) {
3882 qemu_aio_wait();
3885 return data.ret;
3888 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
3889 int nb_sectors, int *pnum)
3891 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
3892 if (ret < 0) {
3893 return ret;
3895 return
3896 (ret & BDRV_BLOCK_DATA) ||
3897 ((ret & BDRV_BLOCK_ZERO) && !bdrv_has_zero_init(bs));
3901 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3903 * Return true if the given sector is allocated in any image between
3904 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3905 * sector is allocated in any image of the chain. Return false otherwise.
3907 * 'pnum' is set to the number of sectors (including and immediately following
3908 * the specified sector) that are known to be in the same
3909 * allocated/unallocated state.
3912 int bdrv_is_allocated_above(BlockDriverState *top,
3913 BlockDriverState *base,
3914 int64_t sector_num,
3915 int nb_sectors, int *pnum)
3917 BlockDriverState *intermediate;
3918 int ret, n = nb_sectors;
3920 intermediate = top;
3921 while (intermediate && intermediate != base) {
3922 int pnum_inter;
3923 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
3924 &pnum_inter);
3925 if (ret < 0) {
3926 return ret;
3927 } else if (ret) {
3928 *pnum = pnum_inter;
3929 return 1;
3933 * [sector_num, nb_sectors] is unallocated on top but intermediate
3934 * might have
3936 * [sector_num+x, nr_sectors] allocated.
3938 if (n > pnum_inter &&
3939 (intermediate == top ||
3940 sector_num + pnum_inter < intermediate->total_sectors)) {
3941 n = pnum_inter;
3944 intermediate = intermediate->backing_hd;
3947 *pnum = n;
3948 return 0;
3951 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3953 if (bs->backing_hd && bs->backing_hd->encrypted)
3954 return bs->backing_file;
3955 else if (bs->encrypted)
3956 return bs->filename;
3957 else
3958 return NULL;
3961 void bdrv_get_backing_filename(BlockDriverState *bs,
3962 char *filename, int filename_size)
3964 pstrcpy(filename, filename_size, bs->backing_file);
3967 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3968 const uint8_t *buf, int nb_sectors)
3970 BlockDriver *drv = bs->drv;
3971 if (!drv)
3972 return -ENOMEDIUM;
3973 if (!drv->bdrv_write_compressed)
3974 return -ENOTSUP;
3975 if (bdrv_check_request(bs, sector_num, nb_sectors))
3976 return -EIO;
3978 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
3980 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3983 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3985 BlockDriver *drv = bs->drv;
3986 if (!drv)
3987 return -ENOMEDIUM;
3988 if (!drv->bdrv_get_info)
3989 return -ENOTSUP;
3990 memset(bdi, 0, sizeof(*bdi));
3991 return drv->bdrv_get_info(bs, bdi);
3994 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
3996 BlockDriver *drv = bs->drv;
3997 if (drv && drv->bdrv_get_specific_info) {
3998 return drv->bdrv_get_specific_info(bs);
4000 return NULL;
4003 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
4004 int64_t pos, int size)
4006 QEMUIOVector qiov;
4007 struct iovec iov = {
4008 .iov_base = (void *) buf,
4009 .iov_len = size,
4012 qemu_iovec_init_external(&qiov, &iov, 1);
4013 return bdrv_writev_vmstate(bs, &qiov, pos);
4016 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
4018 BlockDriver *drv = bs->drv;
4020 if (!drv) {
4021 return -ENOMEDIUM;
4022 } else if (drv->bdrv_save_vmstate) {
4023 return drv->bdrv_save_vmstate(bs, qiov, pos);
4024 } else if (bs->file) {
4025 return bdrv_writev_vmstate(bs->file, qiov, pos);
4028 return -ENOTSUP;
4031 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4032 int64_t pos, int size)
4034 BlockDriver *drv = bs->drv;
4035 if (!drv)
4036 return -ENOMEDIUM;
4037 if (drv->bdrv_load_vmstate)
4038 return drv->bdrv_load_vmstate(bs, buf, pos, size);
4039 if (bs->file)
4040 return bdrv_load_vmstate(bs->file, buf, pos, size);
4041 return -ENOTSUP;
4044 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4046 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4047 return;
4050 bs->drv->bdrv_debug_event(bs, event);
4053 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4054 const char *tag)
4056 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4057 bs = bs->file;
4060 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4061 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4064 return -ENOTSUP;
4067 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4069 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4070 bs = bs->file;
4073 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4074 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4077 return -ENOTSUP;
4080 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4082 while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) {
4083 bs = bs->file;
4086 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4087 return bs->drv->bdrv_debug_resume(bs, tag);
4090 return -ENOTSUP;
4093 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4095 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4096 bs = bs->file;
4099 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4100 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4103 return false;
4106 int bdrv_is_snapshot(BlockDriverState *bs)
4108 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4111 /* backing_file can either be relative, or absolute, or a protocol. If it is
4112 * relative, it must be relative to the chain. So, passing in bs->filename
4113 * from a BDS as backing_file should not be done, as that may be relative to
4114 * the CWD rather than the chain. */
4115 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4116 const char *backing_file)
4118 char *filename_full = NULL;
4119 char *backing_file_full = NULL;
4120 char *filename_tmp = NULL;
4121 int is_protocol = 0;
4122 BlockDriverState *curr_bs = NULL;
4123 BlockDriverState *retval = NULL;
4125 if (!bs || !bs->drv || !backing_file) {
4126 return NULL;
4129 filename_full = g_malloc(PATH_MAX);
4130 backing_file_full = g_malloc(PATH_MAX);
4131 filename_tmp = g_malloc(PATH_MAX);
4133 is_protocol = path_has_protocol(backing_file);
4135 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4137 /* If either of the filename paths is actually a protocol, then
4138 * compare unmodified paths; otherwise make paths relative */
4139 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4140 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4141 retval = curr_bs->backing_hd;
4142 break;
4144 } else {
4145 /* If not an absolute filename path, make it relative to the current
4146 * image's filename path */
4147 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4148 backing_file);
4150 /* We are going to compare absolute pathnames */
4151 if (!realpath(filename_tmp, filename_full)) {
4152 continue;
4155 /* We need to make sure the backing filename we are comparing against
4156 * is relative to the current image filename (or absolute) */
4157 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4158 curr_bs->backing_file);
4160 if (!realpath(filename_tmp, backing_file_full)) {
4161 continue;
4164 if (strcmp(backing_file_full, filename_full) == 0) {
4165 retval = curr_bs->backing_hd;
4166 break;
4171 g_free(filename_full);
4172 g_free(backing_file_full);
4173 g_free(filename_tmp);
4174 return retval;
4177 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4179 if (!bs->drv) {
4180 return 0;
4183 if (!bs->backing_hd) {
4184 return 0;
4187 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4190 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
4192 BlockDriverState *curr_bs = NULL;
4194 if (!bs) {
4195 return NULL;
4198 curr_bs = bs;
4200 while (curr_bs->backing_hd) {
4201 curr_bs = curr_bs->backing_hd;
4203 return curr_bs;
4206 /**************************************************************/
4207 /* async I/Os */
4209 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4210 QEMUIOVector *qiov, int nb_sectors,
4211 BlockDriverCompletionFunc *cb, void *opaque)
4213 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4215 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4216 cb, opaque, false);
4219 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4220 QEMUIOVector *qiov, int nb_sectors,
4221 BlockDriverCompletionFunc *cb, void *opaque)
4223 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4225 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4226 cb, opaque, true);
4229 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4230 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4231 BlockDriverCompletionFunc *cb, void *opaque)
4233 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4235 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4236 BDRV_REQ_ZERO_WRITE | flags,
4237 cb, opaque, true);
4241 typedef struct MultiwriteCB {
4242 int error;
4243 int num_requests;
4244 int num_callbacks;
4245 struct {
4246 BlockDriverCompletionFunc *cb;
4247 void *opaque;
4248 QEMUIOVector *free_qiov;
4249 } callbacks[];
4250 } MultiwriteCB;
4252 static void multiwrite_user_cb(MultiwriteCB *mcb)
4254 int i;
4256 for (i = 0; i < mcb->num_callbacks; i++) {
4257 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4258 if (mcb->callbacks[i].free_qiov) {
4259 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4261 g_free(mcb->callbacks[i].free_qiov);
4265 static void multiwrite_cb(void *opaque, int ret)
4267 MultiwriteCB *mcb = opaque;
4269 trace_multiwrite_cb(mcb, ret);
4271 if (ret < 0 && !mcb->error) {
4272 mcb->error = ret;
4275 mcb->num_requests--;
4276 if (mcb->num_requests == 0) {
4277 multiwrite_user_cb(mcb);
4278 g_free(mcb);
4282 static int multiwrite_req_compare(const void *a, const void *b)
4284 const BlockRequest *req1 = a, *req2 = b;
4287 * Note that we can't simply subtract req2->sector from req1->sector
4288 * here as that could overflow the return value.
4290 if (req1->sector > req2->sector) {
4291 return 1;
4292 } else if (req1->sector < req2->sector) {
4293 return -1;
4294 } else {
4295 return 0;
4300 * Takes a bunch of requests and tries to merge them. Returns the number of
4301 * requests that remain after merging.
4303 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4304 int num_reqs, MultiwriteCB *mcb)
4306 int i, outidx;
4308 // Sort requests by start sector
4309 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4311 // Check if adjacent requests touch the same clusters. If so, combine them,
4312 // filling up gaps with zero sectors.
4313 outidx = 0;
4314 for (i = 1; i < num_reqs; i++) {
4315 int merge = 0;
4316 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4318 // Handle exactly sequential writes and overlapping writes.
4319 if (reqs[i].sector <= oldreq_last) {
4320 merge = 1;
4323 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4324 merge = 0;
4327 if (merge) {
4328 size_t size;
4329 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4330 qemu_iovec_init(qiov,
4331 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4333 // Add the first request to the merged one. If the requests are
4334 // overlapping, drop the last sectors of the first request.
4335 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4336 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4338 // We should need to add any zeros between the two requests
4339 assert (reqs[i].sector <= oldreq_last);
4341 // Add the second request
4342 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4344 reqs[outidx].nb_sectors = qiov->size >> 9;
4345 reqs[outidx].qiov = qiov;
4347 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4348 } else {
4349 outidx++;
4350 reqs[outidx].sector = reqs[i].sector;
4351 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4352 reqs[outidx].qiov = reqs[i].qiov;
4356 return outidx + 1;
4360 * Submit multiple AIO write requests at once.
4362 * On success, the function returns 0 and all requests in the reqs array have
4363 * been submitted. In error case this function returns -1, and any of the
4364 * requests may or may not be submitted yet. In particular, this means that the
4365 * callback will be called for some of the requests, for others it won't. The
4366 * caller must check the error field of the BlockRequest to wait for the right
4367 * callbacks (if error != 0, no callback will be called).
4369 * The implementation may modify the contents of the reqs array, e.g. to merge
4370 * requests. However, the fields opaque and error are left unmodified as they
4371 * are used to signal failure for a single request to the caller.
4373 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4375 MultiwriteCB *mcb;
4376 int i;
4378 /* don't submit writes if we don't have a medium */
4379 if (bs->drv == NULL) {
4380 for (i = 0; i < num_reqs; i++) {
4381 reqs[i].error = -ENOMEDIUM;
4383 return -1;
4386 if (num_reqs == 0) {
4387 return 0;
4390 // Create MultiwriteCB structure
4391 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4392 mcb->num_requests = 0;
4393 mcb->num_callbacks = num_reqs;
4395 for (i = 0; i < num_reqs; i++) {
4396 mcb->callbacks[i].cb = reqs[i].cb;
4397 mcb->callbacks[i].opaque = reqs[i].opaque;
4400 // Check for mergable requests
4401 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4403 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4405 /* Run the aio requests. */
4406 mcb->num_requests = num_reqs;
4407 for (i = 0; i < num_reqs; i++) {
4408 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4409 reqs[i].nb_sectors, reqs[i].flags,
4410 multiwrite_cb, mcb,
4411 true);
4414 return 0;
4417 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4419 acb->aiocb_info->cancel(acb);
4422 /**************************************************************/
4423 /* async block device emulation */
4425 typedef struct BlockDriverAIOCBSync {
4426 BlockDriverAIOCB common;
4427 QEMUBH *bh;
4428 int ret;
4429 /* vector translation state */
4430 QEMUIOVector *qiov;
4431 uint8_t *bounce;
4432 int is_write;
4433 } BlockDriverAIOCBSync;
4435 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4437 BlockDriverAIOCBSync *acb =
4438 container_of(blockacb, BlockDriverAIOCBSync, common);
4439 qemu_bh_delete(acb->bh);
4440 acb->bh = NULL;
4441 qemu_aio_release(acb);
4444 static const AIOCBInfo bdrv_em_aiocb_info = {
4445 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4446 .cancel = bdrv_aio_cancel_em,
4449 static void bdrv_aio_bh_cb(void *opaque)
4451 BlockDriverAIOCBSync *acb = opaque;
4453 if (!acb->is_write)
4454 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4455 qemu_vfree(acb->bounce);
4456 acb->common.cb(acb->common.opaque, acb->ret);
4457 qemu_bh_delete(acb->bh);
4458 acb->bh = NULL;
4459 qemu_aio_release(acb);
4462 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4463 int64_t sector_num,
4464 QEMUIOVector *qiov,
4465 int nb_sectors,
4466 BlockDriverCompletionFunc *cb,
4467 void *opaque,
4468 int is_write)
4471 BlockDriverAIOCBSync *acb;
4473 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4474 acb->is_write = is_write;
4475 acb->qiov = qiov;
4476 acb->bounce = qemu_blockalign(bs, qiov->size);
4477 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
4479 if (is_write) {
4480 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4481 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4482 } else {
4483 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4486 qemu_bh_schedule(acb->bh);
4488 return &acb->common;
4491 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4492 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4493 BlockDriverCompletionFunc *cb, void *opaque)
4495 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4498 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4499 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4500 BlockDriverCompletionFunc *cb, void *opaque)
4502 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4506 typedef struct BlockDriverAIOCBCoroutine {
4507 BlockDriverAIOCB common;
4508 BlockRequest req;
4509 bool is_write;
4510 bool *done;
4511 QEMUBH* bh;
4512 } BlockDriverAIOCBCoroutine;
4514 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4516 BlockDriverAIOCBCoroutine *acb =
4517 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4518 bool done = false;
4520 acb->done = &done;
4521 while (!done) {
4522 qemu_aio_wait();
4526 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4527 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4528 .cancel = bdrv_aio_co_cancel_em,
4531 static void bdrv_co_em_bh(void *opaque)
4533 BlockDriverAIOCBCoroutine *acb = opaque;
4535 acb->common.cb(acb->common.opaque, acb->req.error);
4537 if (acb->done) {
4538 *acb->done = true;
4541 qemu_bh_delete(acb->bh);
4542 qemu_aio_release(acb);
4545 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4546 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4548 BlockDriverAIOCBCoroutine *acb = opaque;
4549 BlockDriverState *bs = acb->common.bs;
4551 if (!acb->is_write) {
4552 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4553 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4554 } else {
4555 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4556 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4559 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4560 qemu_bh_schedule(acb->bh);
4563 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4564 int64_t sector_num,
4565 QEMUIOVector *qiov,
4566 int nb_sectors,
4567 BdrvRequestFlags flags,
4568 BlockDriverCompletionFunc *cb,
4569 void *opaque,
4570 bool is_write)
4572 Coroutine *co;
4573 BlockDriverAIOCBCoroutine *acb;
4575 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4576 acb->req.sector = sector_num;
4577 acb->req.nb_sectors = nb_sectors;
4578 acb->req.qiov = qiov;
4579 acb->req.flags = flags;
4580 acb->is_write = is_write;
4581 acb->done = NULL;
4583 co = qemu_coroutine_create(bdrv_co_do_rw);
4584 qemu_coroutine_enter(co, acb);
4586 return &acb->common;
4589 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4591 BlockDriverAIOCBCoroutine *acb = opaque;
4592 BlockDriverState *bs = acb->common.bs;
4594 acb->req.error = bdrv_co_flush(bs);
4595 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4596 qemu_bh_schedule(acb->bh);
4599 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4600 BlockDriverCompletionFunc *cb, void *opaque)
4602 trace_bdrv_aio_flush(bs, opaque);
4604 Coroutine *co;
4605 BlockDriverAIOCBCoroutine *acb;
4607 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4608 acb->done = NULL;
4610 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4611 qemu_coroutine_enter(co, acb);
4613 return &acb->common;
4616 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4618 BlockDriverAIOCBCoroutine *acb = opaque;
4619 BlockDriverState *bs = acb->common.bs;
4621 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4622 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4623 qemu_bh_schedule(acb->bh);
4626 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4627 int64_t sector_num, int nb_sectors,
4628 BlockDriverCompletionFunc *cb, void *opaque)
4630 Coroutine *co;
4631 BlockDriverAIOCBCoroutine *acb;
4633 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4635 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4636 acb->req.sector = sector_num;
4637 acb->req.nb_sectors = nb_sectors;
4638 acb->done = NULL;
4639 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4640 qemu_coroutine_enter(co, acb);
4642 return &acb->common;
4645 void bdrv_init(void)
4647 module_call_init(MODULE_INIT_BLOCK);
4650 void bdrv_init_with_whitelist(void)
4652 use_bdrv_whitelist = 1;
4653 bdrv_init();
4656 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4657 BlockDriverCompletionFunc *cb, void *opaque)
4659 BlockDriverAIOCB *acb;
4661 acb = g_slice_alloc(aiocb_info->aiocb_size);
4662 acb->aiocb_info = aiocb_info;
4663 acb->bs = bs;
4664 acb->cb = cb;
4665 acb->opaque = opaque;
4666 return acb;
4669 void qemu_aio_release(void *p)
4671 BlockDriverAIOCB *acb = p;
4672 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4675 /**************************************************************/
4676 /* Coroutine block device emulation */
4678 typedef struct CoroutineIOCompletion {
4679 Coroutine *coroutine;
4680 int ret;
4681 } CoroutineIOCompletion;
4683 static void bdrv_co_io_em_complete(void *opaque, int ret)
4685 CoroutineIOCompletion *co = opaque;
4687 co->ret = ret;
4688 qemu_coroutine_enter(co->coroutine, NULL);
4691 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4692 int nb_sectors, QEMUIOVector *iov,
4693 bool is_write)
4695 CoroutineIOCompletion co = {
4696 .coroutine = qemu_coroutine_self(),
4698 BlockDriverAIOCB *acb;
4700 if (is_write) {
4701 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4702 bdrv_co_io_em_complete, &co);
4703 } else {
4704 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4705 bdrv_co_io_em_complete, &co);
4708 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4709 if (!acb) {
4710 return -EIO;
4712 qemu_coroutine_yield();
4714 return co.ret;
4717 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4718 int64_t sector_num, int nb_sectors,
4719 QEMUIOVector *iov)
4721 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4724 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4725 int64_t sector_num, int nb_sectors,
4726 QEMUIOVector *iov)
4728 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4731 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4733 RwCo *rwco = opaque;
4735 rwco->ret = bdrv_co_flush(rwco->bs);
4738 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4740 int ret;
4742 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4743 return 0;
4746 /* Write back cached data to the OS even with cache=unsafe */
4747 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4748 if (bs->drv->bdrv_co_flush_to_os) {
4749 ret = bs->drv->bdrv_co_flush_to_os(bs);
4750 if (ret < 0) {
4751 return ret;
4755 /* But don't actually force it to the disk with cache=unsafe */
4756 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4757 goto flush_parent;
4760 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4761 if (bs->drv->bdrv_co_flush_to_disk) {
4762 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4763 } else if (bs->drv->bdrv_aio_flush) {
4764 BlockDriverAIOCB *acb;
4765 CoroutineIOCompletion co = {
4766 .coroutine = qemu_coroutine_self(),
4769 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4770 if (acb == NULL) {
4771 ret = -EIO;
4772 } else {
4773 qemu_coroutine_yield();
4774 ret = co.ret;
4776 } else {
4778 * Some block drivers always operate in either writethrough or unsafe
4779 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4780 * know how the server works (because the behaviour is hardcoded or
4781 * depends on server-side configuration), so we can't ensure that
4782 * everything is safe on disk. Returning an error doesn't work because
4783 * that would break guests even if the server operates in writethrough
4784 * mode.
4786 * Let's hope the user knows what he's doing.
4788 ret = 0;
4790 if (ret < 0) {
4791 return ret;
4794 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4795 * in the case of cache=unsafe, so there are no useless flushes.
4797 flush_parent:
4798 return bdrv_co_flush(bs->file);
4801 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp)
4803 Error *local_err = NULL;
4804 int ret;
4806 if (!bs->drv) {
4807 return;
4810 if (bs->drv->bdrv_invalidate_cache) {
4811 bs->drv->bdrv_invalidate_cache(bs, &local_err);
4812 } else if (bs->file) {
4813 bdrv_invalidate_cache(bs->file, &local_err);
4815 if (local_err) {
4816 error_propagate(errp, local_err);
4817 return;
4820 ret = refresh_total_sectors(bs, bs->total_sectors);
4821 if (ret < 0) {
4822 error_setg_errno(errp, -ret, "Could not refresh total sector count");
4823 return;
4827 void bdrv_invalidate_cache_all(Error **errp)
4829 BlockDriverState *bs;
4830 Error *local_err = NULL;
4832 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4833 bdrv_invalidate_cache(bs, &local_err);
4834 if (local_err) {
4835 error_propagate(errp, local_err);
4836 return;
4841 void bdrv_clear_incoming_migration_all(void)
4843 BlockDriverState *bs;
4845 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4846 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4850 int bdrv_flush(BlockDriverState *bs)
4852 Coroutine *co;
4853 RwCo rwco = {
4854 .bs = bs,
4855 .ret = NOT_DONE,
4858 if (qemu_in_coroutine()) {
4859 /* Fast-path if already in coroutine context */
4860 bdrv_flush_co_entry(&rwco);
4861 } else {
4862 co = qemu_coroutine_create(bdrv_flush_co_entry);
4863 qemu_coroutine_enter(co, &rwco);
4864 while (rwco.ret == NOT_DONE) {
4865 qemu_aio_wait();
4869 return rwco.ret;
4872 typedef struct DiscardCo {
4873 BlockDriverState *bs;
4874 int64_t sector_num;
4875 int nb_sectors;
4876 int ret;
4877 } DiscardCo;
4878 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4880 DiscardCo *rwco = opaque;
4882 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4885 /* if no limit is specified in the BlockLimits use a default
4886 * of 32768 512-byte sectors (16 MiB) per request.
4888 #define MAX_DISCARD_DEFAULT 32768
4890 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4891 int nb_sectors)
4893 int max_discard;
4895 if (!bs->drv) {
4896 return -ENOMEDIUM;
4897 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4898 return -EIO;
4899 } else if (bs->read_only) {
4900 return -EROFS;
4903 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4905 /* Do nothing if disabled. */
4906 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4907 return 0;
4910 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
4911 return 0;
4914 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
4915 while (nb_sectors > 0) {
4916 int ret;
4917 int num = nb_sectors;
4919 /* align request */
4920 if (bs->bl.discard_alignment &&
4921 num >= bs->bl.discard_alignment &&
4922 sector_num % bs->bl.discard_alignment) {
4923 if (num > bs->bl.discard_alignment) {
4924 num = bs->bl.discard_alignment;
4926 num -= sector_num % bs->bl.discard_alignment;
4929 /* limit request size */
4930 if (num > max_discard) {
4931 num = max_discard;
4934 if (bs->drv->bdrv_co_discard) {
4935 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
4936 } else {
4937 BlockDriverAIOCB *acb;
4938 CoroutineIOCompletion co = {
4939 .coroutine = qemu_coroutine_self(),
4942 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4943 bdrv_co_io_em_complete, &co);
4944 if (acb == NULL) {
4945 return -EIO;
4946 } else {
4947 qemu_coroutine_yield();
4948 ret = co.ret;
4951 if (ret && ret != -ENOTSUP) {
4952 return ret;
4955 sector_num += num;
4956 nb_sectors -= num;
4958 return 0;
4961 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4963 Coroutine *co;
4964 DiscardCo rwco = {
4965 .bs = bs,
4966 .sector_num = sector_num,
4967 .nb_sectors = nb_sectors,
4968 .ret = NOT_DONE,
4971 if (qemu_in_coroutine()) {
4972 /* Fast-path if already in coroutine context */
4973 bdrv_discard_co_entry(&rwco);
4974 } else {
4975 co = qemu_coroutine_create(bdrv_discard_co_entry);
4976 qemu_coroutine_enter(co, &rwco);
4977 while (rwco.ret == NOT_DONE) {
4978 qemu_aio_wait();
4982 return rwco.ret;
4985 /**************************************************************/
4986 /* removable device support */
4989 * Return TRUE if the media is present
4991 int bdrv_is_inserted(BlockDriverState *bs)
4993 BlockDriver *drv = bs->drv;
4995 if (!drv)
4996 return 0;
4997 if (!drv->bdrv_is_inserted)
4998 return 1;
4999 return drv->bdrv_is_inserted(bs);
5003 * Return whether the media changed since the last call to this
5004 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5006 int bdrv_media_changed(BlockDriverState *bs)
5008 BlockDriver *drv = bs->drv;
5010 if (drv && drv->bdrv_media_changed) {
5011 return drv->bdrv_media_changed(bs);
5013 return -ENOTSUP;
5017 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5019 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
5021 BlockDriver *drv = bs->drv;
5023 if (drv && drv->bdrv_eject) {
5024 drv->bdrv_eject(bs, eject_flag);
5027 if (bs->device_name[0] != '\0') {
5028 bdrv_emit_qmp_eject_event(bs, eject_flag);
5033 * Lock or unlock the media (if it is locked, the user won't be able
5034 * to eject it manually).
5036 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
5038 BlockDriver *drv = bs->drv;
5040 trace_bdrv_lock_medium(bs, locked);
5042 if (drv && drv->bdrv_lock_medium) {
5043 drv->bdrv_lock_medium(bs, locked);
5047 /* needed for generic scsi interface */
5049 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5051 BlockDriver *drv = bs->drv;
5053 if (drv && drv->bdrv_ioctl)
5054 return drv->bdrv_ioctl(bs, req, buf);
5055 return -ENOTSUP;
5058 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5059 unsigned long int req, void *buf,
5060 BlockDriverCompletionFunc *cb, void *opaque)
5062 BlockDriver *drv = bs->drv;
5064 if (drv && drv->bdrv_aio_ioctl)
5065 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5066 return NULL;
5069 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5071 bs->guest_block_size = align;
5074 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5076 return qemu_memalign(bdrv_opt_mem_align(bs), size);
5080 * Check if all memory in this vector is sector aligned.
5082 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5084 int i;
5085 size_t alignment = bdrv_opt_mem_align(bs);
5087 for (i = 0; i < qiov->niov; i++) {
5088 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5089 return false;
5091 if (qiov->iov[i].iov_len % alignment) {
5092 return false;
5096 return true;
5099 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity)
5101 int64_t bitmap_size;
5102 BdrvDirtyBitmap *bitmap;
5104 assert((granularity & (granularity - 1)) == 0);
5106 granularity >>= BDRV_SECTOR_BITS;
5107 assert(granularity);
5108 bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
5109 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5110 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5111 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5112 return bitmap;
5115 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5117 BdrvDirtyBitmap *bm, *next;
5118 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5119 if (bm == bitmap) {
5120 QLIST_REMOVE(bitmap, list);
5121 hbitmap_free(bitmap->bitmap);
5122 g_free(bitmap);
5123 return;
5128 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5130 BdrvDirtyBitmap *bm;
5131 BlockDirtyInfoList *list = NULL;
5132 BlockDirtyInfoList **plist = &list;
5134 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5135 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5136 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5137 info->count = bdrv_get_dirty_count(bs, bm);
5138 info->granularity =
5139 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5140 entry->value = info;
5141 *plist = entry;
5142 plist = &entry->next;
5145 return list;
5148 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5150 if (bitmap) {
5151 return hbitmap_get(bitmap->bitmap, sector);
5152 } else {
5153 return 0;
5157 void bdrv_dirty_iter_init(BlockDriverState *bs,
5158 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5160 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5163 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5164 int nr_sectors)
5166 BdrvDirtyBitmap *bitmap;
5167 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5168 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5172 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5174 BdrvDirtyBitmap *bitmap;
5175 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5176 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5180 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5182 return hbitmap_count(bitmap->bitmap);
5185 /* Get a reference to bs */
5186 void bdrv_ref(BlockDriverState *bs)
5188 bs->refcnt++;
5191 /* Release a previously grabbed reference to bs.
5192 * If after releasing, reference count is zero, the BlockDriverState is
5193 * deleted. */
5194 void bdrv_unref(BlockDriverState *bs)
5196 assert(bs->refcnt > 0);
5197 if (--bs->refcnt == 0) {
5198 bdrv_delete(bs);
5202 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
5204 assert(bs->in_use != in_use);
5205 bs->in_use = in_use;
5208 int bdrv_in_use(BlockDriverState *bs)
5210 return bs->in_use;
5213 void bdrv_iostatus_enable(BlockDriverState *bs)
5215 bs->iostatus_enabled = true;
5216 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5219 /* The I/O status is only enabled if the drive explicitly
5220 * enables it _and_ the VM is configured to stop on errors */
5221 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5223 return (bs->iostatus_enabled &&
5224 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5225 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5226 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5229 void bdrv_iostatus_disable(BlockDriverState *bs)
5231 bs->iostatus_enabled = false;
5234 void bdrv_iostatus_reset(BlockDriverState *bs)
5236 if (bdrv_iostatus_is_enabled(bs)) {
5237 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5238 if (bs->job) {
5239 block_job_iostatus_reset(bs->job);
5244 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5246 assert(bdrv_iostatus_is_enabled(bs));
5247 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5248 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5249 BLOCK_DEVICE_IO_STATUS_FAILED;
5253 void
5254 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5255 enum BlockAcctType type)
5257 assert(type < BDRV_MAX_IOTYPE);
5259 cookie->bytes = bytes;
5260 cookie->start_time_ns = get_clock();
5261 cookie->type = type;
5264 void
5265 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5267 assert(cookie->type < BDRV_MAX_IOTYPE);
5269 bs->nr_bytes[cookie->type] += cookie->bytes;
5270 bs->nr_ops[cookie->type]++;
5271 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5274 void bdrv_img_create(const char *filename, const char *fmt,
5275 const char *base_filename, const char *base_fmt,
5276 char *options, uint64_t img_size, int flags,
5277 Error **errp, bool quiet)
5279 QEMUOptionParameter *param = NULL, *create_options = NULL;
5280 QEMUOptionParameter *backing_fmt, *backing_file, *size;
5281 BlockDriver *drv, *proto_drv;
5282 BlockDriver *backing_drv = NULL;
5283 Error *local_err = NULL;
5284 int ret = 0;
5286 /* Find driver and parse its options */
5287 drv = bdrv_find_format(fmt);
5288 if (!drv) {
5289 error_setg(errp, "Unknown file format '%s'", fmt);
5290 return;
5293 proto_drv = bdrv_find_protocol(filename, true);
5294 if (!proto_drv) {
5295 error_setg(errp, "Unknown protocol '%s'", filename);
5296 return;
5299 create_options = append_option_parameters(create_options,
5300 drv->create_options);
5301 create_options = append_option_parameters(create_options,
5302 proto_drv->create_options);
5304 /* Create parameter list with default values */
5305 param = parse_option_parameters("", create_options, param);
5307 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
5309 /* Parse -o options */
5310 if (options) {
5311 param = parse_option_parameters(options, create_options, param);
5312 if (param == NULL) {
5313 error_setg(errp, "Invalid options for file format '%s'.", fmt);
5314 goto out;
5318 if (base_filename) {
5319 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
5320 base_filename)) {
5321 error_setg(errp, "Backing file not supported for file format '%s'",
5322 fmt);
5323 goto out;
5327 if (base_fmt) {
5328 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5329 error_setg(errp, "Backing file format not supported for file "
5330 "format '%s'", fmt);
5331 goto out;
5335 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
5336 if (backing_file && backing_file->value.s) {
5337 if (!strcmp(filename, backing_file->value.s)) {
5338 error_setg(errp, "Error: Trying to create an image with the "
5339 "same filename as the backing file");
5340 goto out;
5344 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
5345 if (backing_fmt && backing_fmt->value.s) {
5346 backing_drv = bdrv_find_format(backing_fmt->value.s);
5347 if (!backing_drv) {
5348 error_setg(errp, "Unknown backing file format '%s'",
5349 backing_fmt->value.s);
5350 goto out;
5354 // The size for the image must always be specified, with one exception:
5355 // If we are using a backing file, we can obtain the size from there
5356 size = get_option_parameter(param, BLOCK_OPT_SIZE);
5357 if (size && size->value.n == -1) {
5358 if (backing_file && backing_file->value.s) {
5359 BlockDriverState *bs;
5360 uint64_t size;
5361 char buf[32];
5362 int back_flags;
5364 /* backing files always opened read-only */
5365 back_flags =
5366 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5368 bs = NULL;
5369 ret = bdrv_open(&bs, backing_file->value.s, NULL, NULL, back_flags,
5370 backing_drv, &local_err);
5371 if (ret < 0) {
5372 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5373 backing_file->value.s,
5374 error_get_pretty(local_err));
5375 error_free(local_err);
5376 local_err = NULL;
5377 goto out;
5379 bdrv_get_geometry(bs, &size);
5380 size *= 512;
5382 snprintf(buf, sizeof(buf), "%" PRId64, size);
5383 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
5385 bdrv_unref(bs);
5386 } else {
5387 error_setg(errp, "Image creation needs a size parameter");
5388 goto out;
5392 if (!quiet) {
5393 printf("Formatting '%s', fmt=%s ", filename, fmt);
5394 print_option_parameters(param);
5395 puts("");
5397 ret = bdrv_create(drv, filename, param, &local_err);
5398 if (ret == -EFBIG) {
5399 /* This is generally a better message than whatever the driver would
5400 * deliver (especially because of the cluster_size_hint), since that
5401 * is most probably not much different from "image too large". */
5402 const char *cluster_size_hint = "";
5403 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
5404 cluster_size_hint = " (try using a larger cluster size)";
5406 error_setg(errp, "The image size is too large for file format '%s'"
5407 "%s", fmt, cluster_size_hint);
5408 error_free(local_err);
5409 local_err = NULL;
5412 out:
5413 free_option_parameters(create_options);
5414 free_option_parameters(param);
5416 if (local_err) {
5417 error_propagate(errp, local_err);
5421 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5423 /* Currently BlockDriverState always uses the main loop AioContext */
5424 return qemu_get_aio_context();
5427 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5428 NotifierWithReturn *notifier)
5430 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5433 int bdrv_amend_options(BlockDriverState *bs, QEMUOptionParameter *options)
5435 if (bs->drv->bdrv_amend_options == NULL) {
5436 return -ENOTSUP;
5438 return bs->drv->bdrv_amend_options(bs, options);
5441 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5442 * of block filter and by bdrv_is_first_non_filter.
5443 * It is used to test if the given bs is the candidate or recurse more in the
5444 * node graph.
5446 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5447 BlockDriverState *candidate)
5449 /* return false if basic checks fails */
5450 if (!bs || !bs->drv) {
5451 return false;
5454 /* the code reached a non block filter driver -> check if the bs is
5455 * the same as the candidate. It's the recursion termination condition.
5457 if (!bs->drv->is_filter) {
5458 return bs == candidate;
5460 /* Down this path the driver is a block filter driver */
5462 /* If the block filter recursion method is defined use it to recurse down
5463 * the node graph.
5465 if (bs->drv->bdrv_recurse_is_first_non_filter) {
5466 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5469 /* the driver is a block filter but don't allow to recurse -> return false
5471 return false;
5474 /* This function checks if the candidate is the first non filter bs down it's
5475 * bs chain. Since we don't have pointers to parents it explore all bs chains
5476 * from the top. Some filters can choose not to pass down the recursion.
5478 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5480 BlockDriverState *bs;
5482 /* walk down the bs forest recursively */
5483 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5484 bool perm;
5486 /* try to recurse in this top level bs */
5487 perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5489 /* candidate is the first non filter */
5490 if (perm) {
5491 return true;
5495 return false;