tcg: add separate monitor command to dump opcode counters
[qemu.git] / include / exec / cpu-all.h
blobf0ce18725c04b6141b5f0e4553094859e5099d46
1 /*
2 * defines common to all virtual CPUs
4 * Copyright (c) 2003 Fabrice Bellard
6 * This library is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License as published by the Free Software Foundation; either
9 * version 2 of the License, or (at your option) any later version.
11 * This library is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * Lesser General Public License for more details.
16 * You should have received a copy of the GNU Lesser General Public
17 * License along with this library; if not, see <http://www.gnu.org/licenses/>.
19 #ifndef CPU_ALL_H
20 #define CPU_ALL_H
22 #include "qemu-common.h"
23 #include "exec/cpu-common.h"
24 #include "exec/memory.h"
25 #include "qemu/thread.h"
26 #include "qom/cpu.h"
28 /* some important defines:
30 * WORDS_ALIGNED : if defined, the host cpu can only make word aligned
31 * memory accesses.
33 * HOST_WORDS_BIGENDIAN : if defined, the host cpu is big endian and
34 * otherwise little endian.
36 * (TARGET_WORDS_ALIGNED : same for target cpu (not supported yet))
38 * TARGET_WORDS_BIGENDIAN : same for target cpu
41 #if defined(HOST_WORDS_BIGENDIAN) != defined(TARGET_WORDS_BIGENDIAN)
42 #define BSWAP_NEEDED
43 #endif
45 #ifdef BSWAP_NEEDED
47 static inline uint16_t tswap16(uint16_t s)
49 return bswap16(s);
52 static inline uint32_t tswap32(uint32_t s)
54 return bswap32(s);
57 static inline uint64_t tswap64(uint64_t s)
59 return bswap64(s);
62 static inline void tswap16s(uint16_t *s)
64 *s = bswap16(*s);
67 static inline void tswap32s(uint32_t *s)
69 *s = bswap32(*s);
72 static inline void tswap64s(uint64_t *s)
74 *s = bswap64(*s);
77 #else
79 static inline uint16_t tswap16(uint16_t s)
81 return s;
84 static inline uint32_t tswap32(uint32_t s)
86 return s;
89 static inline uint64_t tswap64(uint64_t s)
91 return s;
94 static inline void tswap16s(uint16_t *s)
98 static inline void tswap32s(uint32_t *s)
102 static inline void tswap64s(uint64_t *s)
106 #endif
108 #if TARGET_LONG_SIZE == 4
109 #define tswapl(s) tswap32(s)
110 #define tswapls(s) tswap32s((uint32_t *)(s))
111 #define bswaptls(s) bswap32s(s)
112 #else
113 #define tswapl(s) tswap64(s)
114 #define tswapls(s) tswap64s((uint64_t *)(s))
115 #define bswaptls(s) bswap64s(s)
116 #endif
118 /* CPU memory access without any memory or io remapping */
121 * the generic syntax for the memory accesses is:
123 * load: ld{type}{sign}{size}{endian}_{access_type}(ptr)
125 * store: st{type}{size}{endian}_{access_type}(ptr, val)
127 * type is:
128 * (empty): integer access
129 * f : float access
131 * sign is:
132 * (empty): for floats or 32 bit size
133 * u : unsigned
134 * s : signed
136 * size is:
137 * b: 8 bits
138 * w: 16 bits
139 * l: 32 bits
140 * q: 64 bits
142 * endian is:
143 * (empty): target cpu endianness or 8 bit access
144 * r : reversed target cpu endianness (not implemented yet)
145 * be : big endian (not implemented yet)
146 * le : little endian (not implemented yet)
148 * access_type is:
149 * raw : host memory access
150 * user : user mode access using soft MMU
151 * kernel : kernel mode access using soft MMU
154 /* target-endianness CPU memory access functions */
155 #if defined(TARGET_WORDS_BIGENDIAN)
156 #define lduw_p(p) lduw_be_p(p)
157 #define ldsw_p(p) ldsw_be_p(p)
158 #define ldl_p(p) ldl_be_p(p)
159 #define ldq_p(p) ldq_be_p(p)
160 #define ldfl_p(p) ldfl_be_p(p)
161 #define ldfq_p(p) ldfq_be_p(p)
162 #define stw_p(p, v) stw_be_p(p, v)
163 #define stl_p(p, v) stl_be_p(p, v)
164 #define stq_p(p, v) stq_be_p(p, v)
165 #define stfl_p(p, v) stfl_be_p(p, v)
166 #define stfq_p(p, v) stfq_be_p(p, v)
167 #else
168 #define lduw_p(p) lduw_le_p(p)
169 #define ldsw_p(p) ldsw_le_p(p)
170 #define ldl_p(p) ldl_le_p(p)
171 #define ldq_p(p) ldq_le_p(p)
172 #define ldfl_p(p) ldfl_le_p(p)
173 #define ldfq_p(p) ldfq_le_p(p)
174 #define stw_p(p, v) stw_le_p(p, v)
175 #define stl_p(p, v) stl_le_p(p, v)
176 #define stq_p(p, v) stq_le_p(p, v)
177 #define stfl_p(p, v) stfl_le_p(p, v)
178 #define stfq_p(p, v) stfq_le_p(p, v)
179 #endif
181 /* MMU memory access macros */
183 #if defined(CONFIG_USER_ONLY)
184 #include <assert.h>
185 #include "exec/user/abitypes.h"
187 /* On some host systems the guest address space is reserved on the host.
188 * This allows the guest address space to be offset to a convenient location.
190 #if defined(CONFIG_USE_GUEST_BASE)
191 extern unsigned long guest_base;
192 extern int have_guest_base;
193 extern unsigned long reserved_va;
194 #define GUEST_BASE guest_base
195 #define RESERVED_VA reserved_va
196 #else
197 #define GUEST_BASE 0ul
198 #define RESERVED_VA 0ul
199 #endif
201 #define GUEST_ADDR_MAX (RESERVED_VA ? RESERVED_VA : \
202 (1ul << TARGET_VIRT_ADDR_SPACE_BITS) - 1)
203 #endif
205 /* page related stuff */
207 #define TARGET_PAGE_SIZE (1 << TARGET_PAGE_BITS)
208 #define TARGET_PAGE_MASK ~(TARGET_PAGE_SIZE - 1)
209 #define TARGET_PAGE_ALIGN(addr) (((addr) + TARGET_PAGE_SIZE - 1) & TARGET_PAGE_MASK)
211 /* ??? These should be the larger of uintptr_t and target_ulong. */
212 extern uintptr_t qemu_real_host_page_size;
213 extern uintptr_t qemu_host_page_size;
214 extern uintptr_t qemu_host_page_mask;
216 #define HOST_PAGE_ALIGN(addr) (((addr) + qemu_host_page_size - 1) & qemu_host_page_mask)
218 /* same as PROT_xxx */
219 #define PAGE_READ 0x0001
220 #define PAGE_WRITE 0x0002
221 #define PAGE_EXEC 0x0004
222 #define PAGE_BITS (PAGE_READ | PAGE_WRITE | PAGE_EXEC)
223 #define PAGE_VALID 0x0008
224 /* original state of the write flag (used when tracking self-modifying
225 code */
226 #define PAGE_WRITE_ORG 0x0010
227 #if defined(CONFIG_BSD) && defined(CONFIG_USER_ONLY)
228 /* FIXME: Code that sets/uses this is broken and needs to go away. */
229 #define PAGE_RESERVED 0x0020
230 #endif
232 #if defined(CONFIG_USER_ONLY)
233 void page_dump(FILE *f);
235 typedef int (*walk_memory_regions_fn)(void *, target_ulong,
236 target_ulong, unsigned long);
237 int walk_memory_regions(void *, walk_memory_regions_fn);
239 int page_get_flags(target_ulong address);
240 void page_set_flags(target_ulong start, target_ulong end, int flags);
241 int page_check_range(target_ulong start, target_ulong len, int flags);
242 #endif
244 CPUArchState *cpu_copy(CPUArchState *env);
246 /* Flags for use in ENV->INTERRUPT_PENDING.
248 The numbers assigned here are non-sequential in order to preserve
249 binary compatibility with the vmstate dump. Bit 0 (0x0001) was
250 previously used for CPU_INTERRUPT_EXIT, and is cleared when loading
251 the vmstate dump. */
253 /* External hardware interrupt pending. This is typically used for
254 interrupts from devices. */
255 #define CPU_INTERRUPT_HARD 0x0002
257 /* Exit the current TB. This is typically used when some system-level device
258 makes some change to the memory mapping. E.g. the a20 line change. */
259 #define CPU_INTERRUPT_EXITTB 0x0004
261 /* Halt the CPU. */
262 #define CPU_INTERRUPT_HALT 0x0020
264 /* Debug event pending. */
265 #define CPU_INTERRUPT_DEBUG 0x0080
267 /* Reset signal. */
268 #define CPU_INTERRUPT_RESET 0x0400
270 /* Several target-specific external hardware interrupts. Each target/cpu.h
271 should define proper names based on these defines. */
272 #define CPU_INTERRUPT_TGT_EXT_0 0x0008
273 #define CPU_INTERRUPT_TGT_EXT_1 0x0010
274 #define CPU_INTERRUPT_TGT_EXT_2 0x0040
275 #define CPU_INTERRUPT_TGT_EXT_3 0x0200
276 #define CPU_INTERRUPT_TGT_EXT_4 0x1000
278 /* Several target-specific internal interrupts. These differ from the
279 preceding target-specific interrupts in that they are intended to
280 originate from within the cpu itself, typically in response to some
281 instruction being executed. These, therefore, are not masked while
282 single-stepping within the debugger. */
283 #define CPU_INTERRUPT_TGT_INT_0 0x0100
284 #define CPU_INTERRUPT_TGT_INT_1 0x0800
285 #define CPU_INTERRUPT_TGT_INT_2 0x2000
287 /* First unused bit: 0x4000. */
289 /* The set of all bits that should be masked when single-stepping. */
290 #define CPU_INTERRUPT_SSTEP_MASK \
291 (CPU_INTERRUPT_HARD \
292 | CPU_INTERRUPT_TGT_EXT_0 \
293 | CPU_INTERRUPT_TGT_EXT_1 \
294 | CPU_INTERRUPT_TGT_EXT_2 \
295 | CPU_INTERRUPT_TGT_EXT_3 \
296 | CPU_INTERRUPT_TGT_EXT_4)
298 #if !defined(CONFIG_USER_ONLY)
300 /* memory API */
302 typedef struct RAMBlock {
303 struct MemoryRegion *mr;
304 uint8_t *host;
305 ram_addr_t offset;
306 ram_addr_t length;
307 uint32_t flags;
308 char idstr[256];
309 /* Reads can take either the iothread or the ramlist lock.
310 * Writes must take both locks.
312 QTAILQ_ENTRY(RAMBlock) next;
313 int fd;
314 } RAMBlock;
316 static inline void *ramblock_ptr(RAMBlock *block, ram_addr_t offset)
318 assert(offset < block->length);
319 assert(block->host);
320 return (char *)block->host + offset;
323 typedef struct RAMList {
324 QemuMutex mutex;
325 /* Protected by the iothread lock. */
326 unsigned long *dirty_memory[DIRTY_MEMORY_NUM];
327 RAMBlock *mru_block;
328 /* Protected by the ramlist lock. */
329 QTAILQ_HEAD(, RAMBlock) blocks;
330 uint32_t version;
331 } RAMList;
332 extern RAMList ram_list;
334 /* Flags stored in the low bits of the TLB virtual address. These are
335 defined so that fast path ram access is all zeros. */
336 /* Zero if TLB entry is valid. */
337 #define TLB_INVALID_MASK (1 << 3)
338 /* Set if TLB entry references a clean RAM page. The iotlb entry will
339 contain the page physical address. */
340 #define TLB_NOTDIRTY (1 << 4)
341 /* Set if TLB entry is an IO callback. */
342 #define TLB_MMIO (1 << 5)
344 void dump_exec_info(FILE *f, fprintf_function cpu_fprintf);
345 void dump_opcount_info(FILE *f, fprintf_function cpu_fprintf);
346 ram_addr_t last_ram_offset(void);
347 void qemu_mutex_lock_ramlist(void);
348 void qemu_mutex_unlock_ramlist(void);
349 #endif /* !CONFIG_USER_ONLY */
351 int cpu_memory_rw_debug(CPUState *cpu, target_ulong addr,
352 uint8_t *buf, int len, int is_write);
354 #endif /* CPU_ALL_H */