hw/mainstone.c

   1 /*
   2  * PXA270-based Intel Mainstone platforms.
   3  *
   4  * Copyright (c) 2007 by Armin Kuster <akuster@kama-aina.net> or
   5  *                                    <akuster@mvista.com>
   6  *
   7  * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
   8  *
   9  * This code is licensed under the GNU GPL v2.
  10  */
  11 #include "hw.h"
  12 #include "pxa.h"
  13 #include "arm-misc.h"
  14 #include "net.h"
  15 #include "devices.h"
  16 #include "boards.h"
  17 #include "flash.h"
  18 #include "blockdev.h"
  19 #include "sysbus.h"
  20 #include "exec-memory.h"
  21
  22 /* Device addresses */
  23 #define MST_FPGA_PHYS   0x08000000
  24 #define MST_ETH_PHYS    0x10000300
  25 #define MST_FLASH_0             0x00000000
  26 #define MST_FLASH_1             0x04000000
  27
  28 /* IRQ definitions */
  29 #define MMC_IRQ       0
  30 #define USIM_IRQ      1
  31 #define USBC_IRQ      2
  32 #define ETHERNET_IRQ  3
  33 #define AC97_IRQ      4
  34 #define PEN_IRQ       5
  35 #define MSINS_IRQ     6
  36 #define EXBRD_IRQ     7
  37 #define S0_CD_IRQ     9
  38 #define S0_STSCHG_IRQ 10
  39 #define S0_IRQ        11
  40 #define S1_CD_IRQ     13
  41 #define S1_STSCHG_IRQ 14
  42 #define S1_IRQ        15
  43
  44 static struct keymap map[0xE0] = {
  45     [0 ... 0xDF] = { -1, -1 },
  46     [0x1e] = {0,0}, /* a */
  47     [0x30] = {0,1}, /* b */
  48     [0x2e] = {0,2}, /* c */
  49     [0x20] = {0,3}, /* d */
  50     [0x12] = {0,4}, /* e */
  51     [0x21] = {0,5}, /* f */
  52     [0x22] = {1,0}, /* g */
  53     [0x23] = {1,1}, /* h */
  54     [0x17] = {1,2}, /* i */
  55     [0x24] = {1,3}, /* j */
  56     [0x25] = {1,4}, /* k */
  57     [0x26] = {1,5}, /* l */
  58     [0x32] = {2,0}, /* m */
  59     [0x31] = {2,1}, /* n */
  60     [0x18] = {2,2}, /* o */
  61     [0x19] = {2,3}, /* p */
  62     [0x10] = {2,4}, /* q */
  63     [0x13] = {2,5}, /* r */
  64     [0x1f] = {3,0}, /* s */
  65     [0x14] = {3,1}, /* t */
  66     [0x16] = {3,2}, /* u */
  67     [0x2f] = {3,3}, /* v */
  68     [0x11] = {3,4}, /* w */
  69     [0x2d] = {3,5}, /* x */
  70     [0x15] = {4,2}, /* y */
  71     [0x2c] = {4,3}, /* z */
  72     [0xc7] = {5,0}, /* Home */
  73     [0x2a] = {5,1}, /* shift */
  74     [0x39] = {5,2}, /* space */
  75     [0x39] = {5,3}, /* space */
  76     [0x1c] = {5,5}, /*  enter */
  77     [0xc8] = {6,0}, /* up */
  78     [0xd0] = {6,1}, /* down */
  79     [0xcb] = {6,2}, /* left */
  80     [0xcd] = {6,3}, /* right */
  81 };
  82
  83 enum mainstone_model_e { mainstone };
  84
  85 #define MAINSTONE_RAM   0x04000000
  86 #define MAINSTONE_ROM   0x00800000
  87 #define MAINSTONE_FLASH 0x02000000
  88
  89 static struct arm_boot_info mainstone_binfo = {
  90     .loader_start = PXA2XX_SDRAM_BASE,
  91     .ram_size = 0x04000000,
  92 };
  93
  94 static void mainstone_common_init(MemoryRegion *address_space_mem,
  95                 ram_addr_t ram_size,
  96                 const char *kernel_filename,
  97                 const char *kernel_cmdline, const char *initrd_filename,
  98                 const char *cpu_model, enum mainstone_model_e model, int arm_id)
  99 {
 100     uint32_t sector_len = 256 * 1024;
 101     target_phys_addr_t mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };
 102     PXA2xxState *cpu;
 103     DeviceState *mst_irq;
 104     DriveInfo *dinfo;
 105     int i;
 106     int be;
 107     MemoryRegion *rom = g_new(MemoryRegion, 1);
 108
 109     if (!cpu_model)
 110         cpu_model = "pxa270-c5";
 111
 112     /* Setup CPU & memory */
 113     cpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size, cpu_model);
 114     memory_region_init_ram(rom, NULL, "mainstone.rom", MAINSTONE_ROM);
 115     memory_region_set_readonly(rom, true);
 116     memory_region_add_subregion(address_space_mem, 0, rom);
 117
 118 #ifdef TARGET_WORDS_BIGENDIAN
 119     be = 1;
 120 #else
 121     be = 0;
 122 #endif
 123     /* There are two 32MiB flash devices on the board */
 124     for (i = 0; i < 2; i ++) {
 125         dinfo = drive_get(IF_PFLASH, 0, i);
 126         if (!dinfo) {
 127             fprintf(stderr, "Two flash images must be given with the "
 128                     "'pflash' parameter\n");
 129             exit(1);
 130         }
 131
 132         if (!pflash_cfi01_register(mainstone_flash_base[i], NULL,
 133                                    i ? "mainstone.flash1" : "mainstone.flash0",
 134                                    MAINSTONE_FLASH,
 135                                    dinfo->bdrv, sector_len,
 136                                    MAINSTONE_FLASH / sector_len, 4, 0, 0, 0, 0,
 137                                    be)) {
 138             fprintf(stderr, "qemu: Error registering flash memory.\n");
 139             exit(1);
 140         }
 141     }
 142
 143     mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS,
 144                     qdev_get_gpio_in(cpu->gpio, 0));
 145
 146     /* setup keypad */
 147     printf("map addr %p\n", &map);
 148     pxa27x_register_keypad(cpu->kp, map, 0xe0);
 149
 150     /* MMC/SD host */
 151     pxa2xx_mmci_handlers(cpu->mmc, NULL, qdev_get_gpio_in(mst_irq, MMC_IRQ));
 152
 153     pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
 154             qdev_get_gpio_in(mst_irq, S0_IRQ),
 155             qdev_get_gpio_in(mst_irq, S0_CD_IRQ));
 156     pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
 157             qdev_get_gpio_in(mst_irq, S1_IRQ),
 158             qdev_get_gpio_in(mst_irq, S1_CD_IRQ));
 159
 160     smc91c111_init(&nd_table[0], MST_ETH_PHYS,
 161                     qdev_get_gpio_in(mst_irq, ETHERNET_IRQ));
 162
 163     mainstone_binfo.kernel_filename = kernel_filename;
 164     mainstone_binfo.kernel_cmdline = kernel_cmdline;
 165     mainstone_binfo.initrd_filename = initrd_filename;
 166     mainstone_binfo.board_id = arm_id;
 167     arm_load_kernel(cpu->env, &mainstone_binfo);
 168 }
 169
 170 static void mainstone_init(ram_addr_t ram_size,
 171                 const char *boot_device,
 172                 const char *kernel_filename, const char *kernel_cmdline,
 173                 const char *initrd_filename, const char *cpu_model)
 174 {
 175     mainstone_common_init(get_system_memory(), ram_size, kernel_filename,
 176                 kernel_cmdline, initrd_filename, cpu_model, mainstone, 0x196);
 177 }
 178
 179 static QEMUMachine mainstone2_machine = {
 180     .name = "mainstone",
 181     .desc = "Mainstone II (PXA27x)",
 182     .init = mainstone_init,
 183 };
 184
 185 static void mainstone_machine_init(void)
 186 {
 187     qemu_register_machine(&mainstone2_machine);
 188 }
 189
 190 machine_init(mainstone_machine_init);