hw/ssd0323.c

   1 /*
   2  * SSD0323 OLED controller with OSRAM Pictiva 128x64 display.
   3  *
   4  * Copyright (c) 2006-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licenced under the GPL.
   8  */
   9
  10 /* The controller can support a variety of different displays, but we only
  11    implement one.  Most of the commends relating to brightness and geometry
  12    setup are ignored. */
  13 #include "ssi.h"
  14 #include "console.h"
  15
  16 //#define DEBUG_SSD0323 1
  17
  18 #ifdef DEBUG_SSD0323
  19 #define DPRINTF(fmt, ...) \
  20 do { printf("ssd0323: " fmt , ## __VA_ARGS__); } while (0)
  21 #define BADF(fmt, ...) \
  22 do { fprintf(stderr, "ssd0323: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
  23 #else
  24 #define DPRINTF(fmt, ...) do {} while(0)
  25 #define BADF(fmt, ...) \
  26 do { fprintf(stderr, "ssd0323: error: " fmt , ## __VA_ARGS__);} while (0)
  27 #endif
  28
  29 /* Scaling factor for pixels.  */
  30 #define MAGNIFY 4
  31
  32 #define REMAP_SWAP_COLUMN 0x01
  33 #define REMAP_SWAP_NYBBLE 0x02
  34 #define REMAP_VERTICAL    0x04
  35 #define REMAP_SWAP_COM    0x10
  36 #define REMAP_SPLIT_COM   0x40
  37
  38 enum ssd0323_mode
  39 {
  40     SSD0323_CMD,
  41     SSD0323_DATA
  42 };
  43
  44 typedef struct {
  45     SSISlave ssidev;
  46     DisplayState *ds;
  47
  48     int cmd_len;
  49     int cmd;
  50     int cmd_data[8];
  51     int row;
  52     int row_start;
  53     int row_end;
  54     int col;
  55     int col_start;
  56     int col_end;
  57     int redraw;
  58     int remap;
  59     enum ssd0323_mode mode;
  60     uint8_t framebuffer[128 * 80 / 2];
  61 } ssd0323_state;
  62
  63 static uint32_t ssd0323_transfer(SSISlave *dev, uint32_t data)
  64 {
  65     ssd0323_state *s = FROM_SSI_SLAVE(ssd0323_state, dev);
  66
  67     switch (s->mode) {
  68     case SSD0323_DATA:
  69         DPRINTF("data 0x%02x\n", data);
  70         s->framebuffer[s->col + s->row * 64] = data;
  71         if (s->remap & REMAP_VERTICAL) {
  72             s->row++;
  73             if (s->row > s->row_end) {
  74                 s->row = s->row_start;
  75                 s->col++;
  76             }
  77             if (s->col > s->col_end) {
  78                 s->col = s->col_start;
  79             }
  80         } else {
  81             s->col++;
  82             if (s->col > s->col_end) {
  83                 s->row++;
  84                 s->col = s->col_start;
  85             }
  86             if (s->row > s->row_end) {
  87                 s->row = s->row_start;
  88             }
  89         }
  90         s->redraw = 1;
  91         break;
  92     case SSD0323_CMD:
  93         DPRINTF("cmd 0x%02x\n", data);
  94         if (s->cmd_len == 0) {
  95             s->cmd = data;
  96         } else {
  97             s->cmd_data[s->cmd_len - 1] = data;
  98         }
  99         s->cmd_len++;
 100         switch (s->cmd) {
 101 #define DATA(x) if (s->cmd_len <= (x)) return 0
 102         case 0x15: /* Set column.  */
 103             DATA(2);
 104             s->col = s->col_start = s->cmd_data[0] % 64;
 105             s->col_end = s->cmd_data[1] % 64;
 106             break;
 107         case 0x75: /* Set row.  */
 108             DATA(2);
 109             s->row = s->row_start = s->cmd_data[0] % 80;
 110             s->row_end = s->cmd_data[1] % 80;
 111             break;
 112         case 0x81: /* Set contrast */
 113             DATA(1);
 114             break;
 115         case 0x84: case 0x85: case 0x86: /* Max current.  */
 116             DATA(0);
 117             break;
 118         case 0xa0: /* Set remapping.  */
 119             /* FIXME: Implement this.  */
 120             DATA(1);
 121             s->remap = s->cmd_data[0];
 122             break;
 123         case 0xa1: /* Set display start line.  */
 124         case 0xa2: /* Set display offset.  */
 125             /* FIXME: Implement these.  */
 126             DATA(1);
 127             break;
 128         case 0xa4: /* Normal mode.  */
 129         case 0xa5: /* All on.  */
 130         case 0xa6: /* All off.  */
 131         case 0xa7: /* Inverse.  */
 132             /* FIXME: Implement these.  */
 133             DATA(0);
 134             break;
 135         case 0xa8: /* Set multiplex ratio.  */
 136         case 0xad: /* Set DC-DC converter.  */
 137             DATA(1);
 138             /* Ignored.  Don't care.  */
 139             break;
 140         case 0xae: /* Display off.  */
 141         case 0xaf: /* Display on.  */
 142             DATA(0);
 143             /* TODO: Implement power control.  */
 144             break;
 145         case 0xb1: /* Set phase length.  */
 146         case 0xb2: /* Set row period.  */
 147         case 0xb3: /* Set clock rate.  */
 148         case 0xbc: /* Set precharge.  */
 149         case 0xbe: /* Set VCOMH.  */
 150         case 0xbf: /* Set segment low.  */
 151             DATA(1);
 152             /* Ignored.  Don't care.  */
 153             break;
 154         case 0xb8: /* Set grey scale table.  */
 155             /* FIXME: Implement this.  */
 156             DATA(8);
 157             break;
 158         case 0xe3: /* NOP.  */
 159             DATA(0);
 160             break;
 161         case 0xff: /* Nasty hack because we don't handle chip selects
 162                       properly.  */
 163             break;
 164         default:
 165             BADF("Unknown command: 0x%x\n", data);
 166         }
 167         s->cmd_len = 0;
 168         return 0;
 169     }
 170     return 0;
 171 }
 172
 173 static void ssd0323_update_display(void *opaque)
 174 {
 175     ssd0323_state *s = (ssd0323_state *)opaque;
 176     uint8_t *dest;
 177     uint8_t *src;
 178     int x;
 179     int y;
 180     int i;
 181     int line;
 182     char *colors[16];
 183     char colortab[MAGNIFY * 64];
 184     char *p;
 185     int dest_width;
 186
 187     if (!s->redraw)
 188         return;
 189
 190     switch (ds_get_bits_per_pixel(s->ds)) {
 191     case 0:
 192         return;
 193     case 15:
 194         dest_width = 2;
 195         break;
 196     case 16:
 197         dest_width = 2;
 198         break;
 199     case 24:
 200         dest_width = 3;
 201         break;
 202     case 32:
 203         dest_width = 4;
 204         break;
 205     default:
 206         BADF("Bad color depth\n");
 207         return;
 208     }
 209     p = colortab;
 210     for (i = 0; i < 16; i++) {
 211         int n;
 212         colors[i] = p;
 213         switch (ds_get_bits_per_pixel(s->ds)) {
 214         case 15:
 215             n = i * 2 + (i >> 3);
 216             p[0] = n | (n << 5);
 217             p[1] = (n << 2) | (n >> 3);
 218             break;
 219         case 16:
 220             n = i * 2 + (i >> 3);
 221             p[0] = n | (n << 6) | ((n << 1) & 0x20);
 222             p[1] = (n << 3) | (n >> 2);
 223             break;
 224         case 24:
 225         case 32:
 226             n = (i << 4) | i;
 227             p[0] = p[1] = p[2] = n;
 228             break;
 229         default:
 230             BADF("Bad color depth\n");
 231             return;
 232         }
 233         p += dest_width;
 234     }
 235     /* TODO: Implement row/column remapping.  */
 236     dest = ds_get_data(s->ds);
 237     for (y = 0; y < 64; y++) {
 238         line = y;
 239         src = s->framebuffer + 64 * line;
 240         for (x = 0; x < 64; x++) {
 241             int val;
 242             val = *src >> 4;
 243             for (i = 0; i < MAGNIFY; i++) {
 244                 memcpy(dest, colors[val], dest_width);
 245                 dest += dest_width;
 246             }
 247             val = *src & 0xf;
 248             for (i = 0; i < MAGNIFY; i++) {
 249                 memcpy(dest, colors[val], dest_width);
 250                 dest += dest_width;
 251             }
 252             src++;
 253         }
 254         for (i = 1; i < MAGNIFY; i++) {
 255             memcpy(dest, dest - dest_width * MAGNIFY * 128,
 256                    dest_width * 128 * MAGNIFY);
 257             dest += dest_width * 128 * MAGNIFY;
 258         }
 259     }
 260     s->redraw = 0;
 261     dpy_update(s->ds, 0, 0, 128 * MAGNIFY, 64 * MAGNIFY);
 262 }
 263
 264 static void ssd0323_invalidate_display(void * opaque)
 265 {
 266     ssd0323_state *s = (ssd0323_state *)opaque;
 267     s->redraw = 1;
 268 }
 269
 270 /* Command/data input.  */
 271 static void ssd0323_cd(void *opaque, int n, int level)
 272 {
 273     ssd0323_state *s = (ssd0323_state *)opaque;
 274     DPRINTF("%s mode\n", level ? "Data" : "Command");
 275     s->mode = level ? SSD0323_DATA : SSD0323_CMD;
 276 }
 277
 278 static void ssd0323_save(QEMUFile *f, void *opaque)
 279 {
 280     ssd0323_state *s = (ssd0323_state *)opaque;
 281     int i;
 282
 283     qemu_put_be32(f, s->cmd_len);
 284     qemu_put_be32(f, s->cmd);
 285     for (i = 0; i < 8; i++)
 286         qemu_put_be32(f, s->cmd_data[i]);
 287     qemu_put_be32(f, s->row);
 288     qemu_put_be32(f, s->row_start);
 289     qemu_put_be32(f, s->row_end);
 290     qemu_put_be32(f, s->col);
 291     qemu_put_be32(f, s->col_start);
 292     qemu_put_be32(f, s->col_end);
 293     qemu_put_be32(f, s->redraw);
 294     qemu_put_be32(f, s->remap);
 295     qemu_put_be32(f, s->mode);
 296     qemu_put_buffer(f, s->framebuffer, sizeof(s->framebuffer));
 297 }
 298
 299 static int ssd0323_load(QEMUFile *f, void *opaque, int version_id)
 300 {
 301     ssd0323_state *s = (ssd0323_state *)opaque;
 302     int i;
 303
 304     if (version_id != 1)
 305         return -EINVAL;
 306
 307     s->cmd_len = qemu_get_be32(f);
 308     s->cmd = qemu_get_be32(f);
 309     for (i = 0; i < 8; i++)
 310         s->cmd_data[i] = qemu_get_be32(f);
 311     s->row = qemu_get_be32(f);
 312     s->row_start = qemu_get_be32(f);
 313     s->row_end = qemu_get_be32(f);
 314     s->col = qemu_get_be32(f);
 315     s->col_start = qemu_get_be32(f);
 316     s->col_end = qemu_get_be32(f);
 317     s->redraw = qemu_get_be32(f);
 318     s->remap = qemu_get_be32(f);
 319     s->mode = qemu_get_be32(f);
 320     qemu_get_buffer(f, s->framebuffer, sizeof(s->framebuffer));
 321
 322     return 0;
 323 }
 324
 325 static void ssd0323_init(SSISlave *dev)
 326 {
 327     ssd0323_state *s = FROM_SSI_SLAVE(ssd0323_state, dev);
 328
 329     s->col_end = 63;
 330     s->row_end = 79;
 331     s->ds = graphic_console_init(ssd0323_update_display,
 332                                  ssd0323_invalidate_display,
 333                                  NULL, NULL, s);
 334     qemu_console_resize(s->ds, 128 * MAGNIFY, 64 * MAGNIFY);
 335
 336     qdev_init_gpio_in(&dev->qdev, ssd0323_cd, 1);
 337
 338     register_savevm("ssd0323_oled", -1, 1, ssd0323_save, ssd0323_load, s);
 339 }
 340
 341 static SSISlaveInfo ssd0323_info = {
 342     .qdev.name = "ssd0323",
 343     .qdev.size = sizeof(ssd0323_state),
 344     .init = ssd0323_init,
 345     .transfer = ssd0323_transfer
 346 };
 347
 348 static void ssd03232_register_devices(void)
 349 {
 350     ssi_register_slave(&ssd0323_info);
 351 }
 352
 353 device_init(ssd03232_register_devices)