1 /***************************************************************************
2 * Copyright (C) 2008 by Spencer Oliver *
3 * spen@spen-soft.co.uk *
5 * Copyright (C) 2008 by David T.L. Wong *
7 * Copyright (C) 2009 by David N. Claffey <dnclaffey@gmail.com> *
9 * Copyright (C) 2011 by Drasko DRASKOVIC *
10 * drasko.draskovic@gmail.com *
12 * This program is free software; you can redistribute it and/or modify *
13 * it under the terms of the GNU General Public License as published by *
14 * the Free Software Foundation; either version 2 of the License, or *
15 * (at your option) any later version. *
17 * This program is distributed in the hope that it will be useful, *
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
20 * GNU General Public License for more details. *
22 * You should have received a copy of the GNU General Public License *
23 * along with this program; if not, write to the *
24 * Free Software Foundation, Inc., *
25 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
26 ***************************************************************************/
29 * This version has optimized assembly routines for 32 bit operations:
32 * - write array of words
34 * One thing to be aware of is that the MIPS32 cpu will execute the
35 * instruction after a branch instruction (one delay slot).
42 * The LW $1, ($2 +100) instruction is also executed. If this is
43 * not wanted a NOP can be inserted:
50 * or the code can be changed to:
56 * The original code contained NOPs. I have removed these and moved
59 * I also moved the PRACC_STACK to 0xFF204000. This allows
60 * the use of 16 bits offsets to get pointers to the input
61 * and output area relative to the stack. Note that the stack
62 * isn't really a stack (the stack pointer is not 'moving')
63 * but a FIFO simulated in software.
65 * These changes result in a 35% speed increase when programming an
68 * More improvement could be gained if the registers do no need
69 * to be preserved but in that case the routines should be aware
70 * OpenOCD is used as a flash programmer or as a debug tool.
79 #include <helper/time_support.h>
82 #include "mips32_pracc.h"
84 struct mips32_pracc_context
{
85 uint32_t *local_iparam
;
87 uint32_t *local_oparam
;
93 struct mips_ejtag
*ejtag_info
;
96 static int mips32_pracc_sync_cache(struct mips_ejtag
*ejtag_info
,
97 uint32_t start_addr
, uint32_t end_addr
);
98 static int mips32_pracc_clean_invalidate_cache(struct mips_ejtag
*ejtag_info
,
99 uint32_t start_addr
, uint32_t end_addr
);
101 static int wait_for_pracc_rw(struct mips_ejtag
*ejtag_info
, uint32_t *ctrl
)
104 long long then
= timeval_ms();
108 /* wait for the PrAcc to become "1" */
109 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_CONTROL
);
112 ejtag_ctrl
= ejtag_info
->ejtag_ctrl
;
113 retval
= mips_ejtag_drscan_32(ejtag_info
, &ejtag_ctrl
);
114 if (retval
!= ERROR_OK
)
117 if (ejtag_ctrl
& EJTAG_CTRL_PRACC
)
120 timeout
= timeval_ms() - then
;
121 if (timeout
> 1000) {
122 LOG_DEBUG("DEBUGMODULE: No memory access in progress!");
123 return ERROR_JTAG_DEVICE_ERROR
;
131 static int mips32_pracc_exec_read(struct mips32_pracc_context
*ctx
, uint32_t address
)
133 struct mips_ejtag
*ejtag_info
= ctx
->ejtag_info
;
135 uint32_t ejtag_ctrl
, data
;
137 if ((address
>= MIPS32_PRACC_PARAM_IN
)
138 && (address
< MIPS32_PRACC_PARAM_IN
+ ctx
->num_iparam
* 4)) {
139 offset
= (address
- MIPS32_PRACC_PARAM_IN
) / 4;
140 data
= ctx
->local_iparam
[offset
];
141 } else if ((address
>= MIPS32_PRACC_PARAM_OUT
)
142 && (address
< MIPS32_PRACC_PARAM_OUT
+ ctx
->num_oparam
* 4)) {
143 offset
= (address
- MIPS32_PRACC_PARAM_OUT
) / 4;
144 data
= ctx
->local_oparam
[offset
];
145 } else if ((address
>= MIPS32_PRACC_TEXT
)
146 && (address
< MIPS32_PRACC_TEXT
+ ctx
->code_len
* 4)) {
147 offset
= (address
- MIPS32_PRACC_TEXT
) / 4;
148 data
= ctx
->code
[offset
];
149 } else if (address
== MIPS32_PRACC_STACK
) {
150 if (ctx
->stack_offset
<= 0) {
151 LOG_ERROR("Error: Pracc stack out of bounds");
152 return ERROR_JTAG_DEVICE_ERROR
;
154 /* save to our debug stack */
155 data
= ctx
->stack
[--ctx
->stack_offset
];
157 /* TODO: send JMP 0xFF200000 instruction. Hopefully processor jump back
158 * to start of debug vector */
160 LOG_ERROR("Error reading unexpected address 0x%8.8" PRIx32
"", address
);
161 return ERROR_JTAG_DEVICE_ERROR
;
164 /* Send the data out */
165 mips_ejtag_set_instr(ctx
->ejtag_info
, EJTAG_INST_DATA
);
166 mips_ejtag_drscan_32_out(ctx
->ejtag_info
, data
);
168 /* Clear the access pending bit (let the processor eat!) */
169 ejtag_ctrl
= ejtag_info
->ejtag_ctrl
& ~EJTAG_CTRL_PRACC
;
170 mips_ejtag_set_instr(ctx
->ejtag_info
, EJTAG_INST_CONTROL
);
171 mips_ejtag_drscan_32_out(ctx
->ejtag_info
, ejtag_ctrl
);
173 return jtag_execute_queue();
176 static int mips32_pracc_exec_write(struct mips32_pracc_context
*ctx
, uint32_t address
)
178 uint32_t ejtag_ctrl
, data
;
180 struct mips_ejtag
*ejtag_info
= ctx
->ejtag_info
;
183 mips_ejtag_set_instr(ctx
->ejtag_info
, EJTAG_INST_DATA
);
184 retval
= mips_ejtag_drscan_32(ctx
->ejtag_info
, &data
);
185 if (retval
!= ERROR_OK
)
188 /* Clear access pending bit */
189 ejtag_ctrl
= ejtag_info
->ejtag_ctrl
& ~EJTAG_CTRL_PRACC
;
190 mips_ejtag_set_instr(ctx
->ejtag_info
, EJTAG_INST_CONTROL
);
191 mips_ejtag_drscan_32_out(ctx
->ejtag_info
, ejtag_ctrl
);
193 retval
= jtag_execute_queue();
194 if (retval
!= ERROR_OK
)
197 if ((address
>= MIPS32_PRACC_PARAM_IN
)
198 && (address
< MIPS32_PRACC_PARAM_IN
+ ctx
->num_iparam
* 4)) {
199 offset
= (address
- MIPS32_PRACC_PARAM_IN
) / 4;
200 ctx
->local_iparam
[offset
] = data
;
201 } else if ((address
>= MIPS32_PRACC_PARAM_OUT
)
202 && (address
< MIPS32_PRACC_PARAM_OUT
+ ctx
->num_oparam
* 4)) {
203 offset
= (address
- MIPS32_PRACC_PARAM_OUT
) / 4;
204 ctx
->local_oparam
[offset
] = data
;
205 } else if (address
== MIPS32_PRACC_STACK
) {
206 if (ctx
->stack_offset
>= 32) {
207 LOG_ERROR("Error: Pracc stack out of bounds");
208 return ERROR_JTAG_DEVICE_ERROR
;
210 /* save data onto our stack */
211 ctx
->stack
[ctx
->stack_offset
++] = data
;
213 LOG_ERROR("Error writing unexpected address 0x%8.8" PRIx32
"", address
);
214 return ERROR_JTAG_DEVICE_ERROR
;
220 int mips32_pracc_exec(struct mips_ejtag
*ejtag_info
, int code_len
, const uint32_t *code
,
221 int num_param_in
, uint32_t *param_in
, int num_param_out
, uint32_t *param_out
, int cycle
)
225 struct mips32_pracc_context ctx
;
229 ctx
.local_iparam
= param_in
;
230 ctx
.local_oparam
= param_out
;
231 ctx
.num_iparam
= num_param_in
;
232 ctx
.num_oparam
= num_param_out
;
234 ctx
.code_len
= code_len
;
235 ctx
.ejtag_info
= ejtag_info
;
236 ctx
.stack_offset
= 0;
239 retval
= wait_for_pracc_rw(ejtag_info
, &ejtag_ctrl
);
240 if (retval
!= ERROR_OK
)
244 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_ADDRESS
);
245 retval
= mips_ejtag_drscan_32(ejtag_info
, &address
);
246 if (retval
!= ERROR_OK
)
249 /* Check for read or write */
250 if (ejtag_ctrl
& EJTAG_CTRL_PRNW
) {
251 retval
= mips32_pracc_exec_write(&ctx
, address
);
252 if (retval
!= ERROR_OK
)
255 /* Check to see if its reading at the debug vector. The first pass through
256 * the module is always read at the vector, so the first one we allow. When
257 * the second read from the vector occurs we are done and just exit. */
258 if ((address
== MIPS32_PRACC_TEXT
) && (pass
++))
261 retval
= mips32_pracc_exec_read(&ctx
, address
);
262 if (retval
!= ERROR_OK
)
270 /* stack sanity check */
271 if (ctx
.stack_offset
!= 0)
272 LOG_DEBUG("Pracc Stack not zero");
277 static int mips32_pracc_read_u32(struct mips_ejtag
*ejtag_info
, uint32_t addr
, uint32_t *buf
)
281 MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
282 MIPS32_LUI(15, PRACC_UPPER_BASE_ADDR
), /* $15 = MIPS32_PRACC_BASE_ADDR */
283 MIPS32_SW(8, PRACC_STACK_OFFSET
, 15), /* sw $8,PRACC_STACK_OFFSET($15) */
285 MIPS32_LUI(8, UPPER16((addr
+ 0x8000))), /* load $8 with modified upper address */
286 MIPS32_LW(8, LOWER16(addr
), 8), /* lw $8, LOWER16(addr)($8) */
287 MIPS32_SW(8, PRACC_OUT_OFFSET
, 15), /* sw $8,PRACC_OUT_OFFSET($15) */
289 MIPS32_LW(8, PRACC_STACK_OFFSET
, 15), /* lw $8,PRACC_STACK_OFFSET($15) */
290 MIPS32_B(NEG16(8)), /* b start */
291 MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
294 return mips32_pracc_exec(ejtag_info
, ARRAY_SIZE(code
), code
, 0, NULL
, 1, buf
, 1);
297 int mips32_pracc_read_mem(struct mips_ejtag
*ejtag_info
, uint32_t addr
, int size
, int count
, void *buf
)
299 if (count
== 1 && size
== 4)
300 return mips32_pracc_read_u32(ejtag_info
, addr
, (uint32_t *)buf
);
302 int retval
= ERROR_FAIL
;
304 uint32_t *code
= NULL
;
305 uint32_t *data
= NULL
;
307 code
= malloc((256 * 2 + 10) * sizeof(uint32_t));
309 LOG_ERROR("Out of memory");
314 data
= malloc(256 * sizeof(uint32_t));
316 LOG_ERROR("Out of memory");
321 uint32_t *buf32
= buf
;
322 uint16_t *buf16
= buf
;
326 uint32_t upper_base_addr
, last_upper_base_addr
;
327 int this_round_count
;
331 this_round_count
= (count
> 256) ? 256 : count
;
332 last_upper_base_addr
= UPPER16((addr
+ 0x8000));
333 uint32_t *code_p
= code
;
335 *code_p
++ = MIPS32_MTC0(15, 31, 0); /* save $15 in DeSave */
336 *code_p
++ = MIPS32_LUI(15, PRACC_UPPER_BASE_ADDR
); /* $15 = MIPS32_PRACC_BASE_ADDR */
337 *code_p
++ = MIPS32_SW(8, PRACC_STACK_OFFSET
, 15); /* save $8 and $9 to pracc stack */
338 *code_p
++ = MIPS32_SW(9, PRACC_STACK_OFFSET
, 15);
339 *code_p
++ = MIPS32_LUI(9, last_upper_base_addr
); /* load the upper memory address in $9*/
342 for (i
= 0; i
!= this_round_count
; i
++) { /* Main code loop */
343 upper_base_addr
= UPPER16((addr
+ 0x8000));
344 if (last_upper_base_addr
!= upper_base_addr
) {
345 *code_p
++ = MIPS32_LUI(9, upper_base_addr
); /* if needed, change upper address in $9*/
347 last_upper_base_addr
= upper_base_addr
;
351 *code_p
++ = MIPS32_LW(8, LOWER16(addr
), 9); /* load from memory to $8 */
353 *code_p
++ = MIPS32_LHU(8, LOWER16(addr
), 9);
355 *code_p
++ = MIPS32_LBU(8, LOWER16(addr
), 9);
357 *code_p
++ = MIPS32_SW(8, PRACC_OUT_OFFSET
+ i
* 4, 15); /* store $8 at param out */
363 *code_p
++ = MIPS32_LW(9, PRACC_STACK_OFFSET
, 15); /* restore $8 and $9 from pracc stack */
364 *code_p
++ = MIPS32_LW(8, PRACC_STACK_OFFSET
, 15);
367 *code_p
++ = MIPS32_B(NEG16(code_len
- 1)); /* jump to start */
368 *code_p
= MIPS32_MFC0(15, 31, 0); /* restore $15 from DeSave */
371 retval
= mips32_pracc_exec(ejtag_info
, code_len
, code
, 0, NULL
, this_round_count
, buf32
, 1);
372 if (retval
!= ERROR_OK
)
374 buf32
+= this_round_count
;
376 retval
= mips32_pracc_exec(ejtag_info
, code_len
, code
, 0, NULL
, this_round_count
, data
, 1);
377 if (retval
!= ERROR_OK
)
379 uint32_t *data_p
= data
;
380 for (i
= 0; i
!= this_round_count
; i
++) {
382 *buf16
++ = *data_p
++;
387 count
-= this_round_count
;
398 int mips32_cp0_read(struct mips_ejtag
*ejtag_info
, uint32_t *val
, uint32_t cp0_reg
, uint32_t cp0_sel
)
401 * Do not make this code static, but regenerate it every time,
402 * as 3th element has to be changed to add parameters
406 MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
407 MIPS32_LUI(15, PRACC_UPPER_BASE_ADDR
), /* $15 = MIPS32_PRACC_BASE_ADDR */
408 MIPS32_SW(8, PRACC_STACK_OFFSET
, 15), /* sw $8,PRACC_STACK_OFFSET($15) */
410 /* 3 */ MIPS32_MFC0(8, 0, 0), /* move COP0 [cp0_reg select] to $8 */
411 MIPS32_SW(8, PRACC_OUT_OFFSET
, 15), /* sw $8,PRACC_OUT_OFFSET($15) */
413 MIPS32_LW(8, PRACC_STACK_OFFSET
, 15), /* lw $8,PRACC_STACK_OFFSET($15) */
414 MIPS32_B(NEG16(7)), /* b start */
415 MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
419 * Note that our input parametes cp0_reg and cp0_sel
420 * are numbers (not gprs) which make part of mfc0 instruction opcode.
422 * These are not fix, but can be different for each mips32_cp0_read() function call,
423 * and that is why we must insert them directly into opcode,
424 * i.e. we can not pass it on EJTAG microprogram stack (via param_in),
425 * and put them into the gprs later from MIPS32_PRACC_STACK
426 * because mfc0 do not use gpr as a parameter for the cp0_reg and select part,
427 * but plain (immediate) number.
429 * MIPS32_MTC0 is implemented via MIPS32_R_INST macro.
430 * In order to insert our parameters, we must change rd and funct fields.
432 code
[3] |= (cp0_reg
<< 11) | cp0_sel
; /* change rd and funct of MIPS32_R_INST macro */
434 return mips32_pracc_exec(ejtag_info
, ARRAY_SIZE(code
), code
, 0, NULL
, 1, val
, 1);
437 int mips32_cp0_write(struct mips_ejtag
*ejtag_info
, uint32_t val
, uint32_t cp0_reg
, uint32_t cp0_sel
)
441 MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
442 MIPS32_LUI(15, UPPER16(val
)), /* Load val to $15 */
443 MIPS32_ORI(15, 15, LOWER16(val
)),
445 /* 3 */ MIPS32_MTC0(15, 0, 0), /* move $15 to COP0 [cp0_reg select] */
447 MIPS32_B(NEG16(5)), /* b start */
448 MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
452 * Note that MIPS32_MTC0 macro is implemented via MIPS32_R_INST macro.
453 * In order to insert our parameters, we must change rd and funct fields.
455 code
[3] |= (cp0_reg
<< 11) | cp0_sel
; /* change rd and funct fields of MIPS32_R_INST macro */
457 return mips32_pracc_exec(ejtag_info
, ARRAY_SIZE(code
), code
, 0, NULL
, 0, NULL
, 1);
461 * \b mips32_pracc_sync_cache
463 * Synchronize Caches to Make Instruction Writes Effective
464 * (ref. doc. MIPS32 Architecture For Programmers Volume II: The MIPS32 Instruction Set,
465 * Document Number: MD00086, Revision 2.00, June 9, 2003)
467 * When the instruction stream is written, the SYNCI instruction should be used
468 * in conjunction with other instructions to make the newly-written instructions effective.
471 * A program that loads another program into memory is actually writing the D- side cache.
472 * The instructions it has loaded can't be executed until they reach the I-cache.
474 * After the instructions have been written, the loader should arrange
475 * to write back any containing D-cache line and invalidate any locations
476 * already in the I-cache.
478 * You can do that with cache instructions, but those instructions are only available in kernel mode,
479 * and a loader writing instructions for the use of its own process need not be privileged software.
481 * In the latest MIPS32/64 CPUs, MIPS provides the synci instruction,
482 * which does the whole job for a cache-line-sized chunk of the memory you just loaded:
483 * That is, it arranges a D-cache write-back and an I-cache invalidate.
485 * To employ synci at user level, you need to know the size of a cache line,
486 * and that can be obtained with a rdhwr SYNCI_Step
487 * from one of the standard “hardware registers”.
489 static int mips32_pracc_sync_cache(struct mips_ejtag
*ejtag_info
,
490 uint32_t start_addr
, uint32_t end_addr
)
492 static const uint32_t code
[] = {
494 MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
495 MIPS32_LUI(15, UPPER16(MIPS32_PRACC_STACK
)), /* $15 = MIPS32_PRACC_STACK */
496 MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_STACK
)),
497 MIPS32_SW(8, 0, 15), /* sw $8,($15) */
498 MIPS32_SW(9, 0, 15), /* sw $9,($15) */
499 MIPS32_SW(10, 0, 15), /* sw $10,($15) */
500 MIPS32_SW(11, 0, 15), /* sw $11,($15) */
502 MIPS32_LUI(8, UPPER16(MIPS32_PRACC_PARAM_IN
)), /* $8 = MIPS32_PRACC_PARAM_IN */
503 MIPS32_ORI(8, 8, LOWER16(MIPS32_PRACC_PARAM_IN
)),
504 MIPS32_LW(9, 0, 8), /* Load write start_addr to $9 */
505 MIPS32_LW(10, 4, 8), /* Load write end_addr to $10 */
507 MIPS32_RDHWR(11, MIPS32_SYNCI_STEP
), /* $11 = MIPS32_SYNCI_STEP */
508 MIPS32_BEQ(11, 0, 6), /* beq $11, $0, end */
511 MIPS32_SYNCI(0, 9), /* synci 0($9) */
512 MIPS32_SLTU(8, 10, 9), /* sltu $8, $10, $9 # $8 = $10 < $9 ? 1 : 0 */
513 MIPS32_BNE(8, 0, NEG16(3)), /* bne $8, $0, synci_loop */
514 MIPS32_ADDU(9, 9, 11), /* $9 += MIPS32_SYNCI_STEP */
517 MIPS32_LW(11, 0, 15), /* lw $11,($15) */
518 MIPS32_LW(10, 0, 15), /* lw $10,($15) */
519 MIPS32_LW(9, 0, 15), /* lw $9,($15) */
520 MIPS32_LW(8, 0, 15), /* lw $8,($15) */
521 MIPS32_B(NEG16(24)), /* b start */
522 MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
525 /* TODO remove array */
526 uint32_t *param_in
= malloc(2 * sizeof(uint32_t));
528 param_in
[0] = start_addr
;
529 param_in
[1] = end_addr
;
531 retval
= mips32_pracc_exec(ejtag_info
, ARRAY_SIZE(code
), code
, 2, param_in
, 0, NULL
, 1);
539 * \b mips32_pracc_clean_invalidate_cache
541 * Writeback D$ and Invalidate I$
542 * so that the instructions written can be visible to CPU
544 static int mips32_pracc_clean_invalidate_cache(struct mips_ejtag
*ejtag_info
,
545 uint32_t start_addr
, uint32_t end_addr
)
547 static const uint32_t code
[] = {
549 MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
550 MIPS32_LUI(15, UPPER16(MIPS32_PRACC_STACK
)), /* $15 = MIPS32_PRACC_STACK */
551 MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_STACK
)),
552 MIPS32_SW(8, 0, 15), /* sw $8,($15) */
553 MIPS32_SW(9, 0, 15), /* sw $9,($15) */
554 MIPS32_SW(10, 0, 15), /* sw $10,($15) */
555 MIPS32_SW(11, 0, 15), /* sw $11,($15) */
557 MIPS32_LUI(8, UPPER16(MIPS32_PRACC_PARAM_IN
)), /* $8 = MIPS32_PRACC_PARAM_IN */
558 MIPS32_ORI(8, 8, LOWER16(MIPS32_PRACC_PARAM_IN
)),
559 MIPS32_LW(9, 0, 8), /* Load write start_addr to $9 */
560 MIPS32_LW(10, 4, 8), /* Load write end_addr to $10 */
561 MIPS32_LW(11, 8, 8), /* Load write clsiz to $11 */
564 MIPS32_SLTU(8, 10, 9), /* sltu $8, $10, $9 : $8 <- $10 < $9 ? */
565 MIPS32_BGTZ(8, 6), /* bgtz $8, end */
568 MIPS32_CACHE(MIPS32_CACHE_D_HIT_WRITEBACK
, 0, 9), /* cache Hit_Writeback_D, 0($9) */
569 MIPS32_CACHE(MIPS32_CACHE_I_HIT_INVALIDATE
, 0, 9), /* cache Hit_Invalidate_I, 0($9) */
571 MIPS32_ADDU(9, 9, 11), /* $9 += $11 */
573 MIPS32_B(NEG16(7)), /* b cache_loop */
576 MIPS32_LW(11, 0, 15), /* lw $11,($15) */
577 MIPS32_LW(10, 0, 15), /* lw $10,($15) */
578 MIPS32_LW(9, 0, 15), /* lw $9,($15) */
579 MIPS32_LW(8, 0, 15), /* lw $8,($15) */
580 MIPS32_B(NEG16(25)), /* b start */
581 MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
585 * Find cache line size in bytes
590 mips32_cp0_read(ejtag_info
, &conf
, 16, 1);
591 dl
= (conf
& MIPS32_CONFIG1_DL_MASK
) >> MIPS32_CONFIG1_DL_SHIFT
;
593 /* dl encoding : dl=1 => 4 bytes, dl=2 => 8 bytes, etc... */
596 /* TODO remove array */
597 uint32_t *param_in
= malloc(3 * sizeof(uint32_t));
599 param_in
[0] = start_addr
;
600 param_in
[1] = end_addr
;
603 retval
= mips32_pracc_exec(ejtag_info
, ARRAY_SIZE(code
), code
, 3, param_in
, 0, NULL
, 1);
610 static int mips32_pracc_write_mem_generic(struct mips_ejtag
*ejtag_info
, uint32_t addr
, int size
, int count
, void *buf
)
613 code
= malloc((128 * 3 + 9) * sizeof(uint32_t)); /* alloc memory for the worst case */
615 LOG_ERROR("Out of memory");
619 uint32_t *buf32
= buf
;
620 uint16_t *buf16
= buf
;
624 int retval
= ERROR_FAIL
;
626 uint32_t upper_base_addr
, last_upper_base_addr
;
627 int this_round_count
;
631 this_round_count
= (count
> 128) ? 128 : count
;
632 last_upper_base_addr
= UPPER16((addr
+ 0x8000));
635 *code_p
++ = MIPS32_MTC0(15, 31, 0); /* save $15 in DeSave */
636 *code_p
++ = MIPS32_LUI(15, PRACC_UPPER_BASE_ADDR
); /* $15 = MIPS32_PRACC_BASE_ADDR */
637 *code_p
++ = MIPS32_SW(8, PRACC_STACK_OFFSET
, 15); /* save $8 to pracc stack */
638 *code_p
++ = MIPS32_LUI(15, last_upper_base_addr
); /* reuse $15 as memory base address */
641 for (i
= 0; i
!= this_round_count
; i
++) {
642 upper_base_addr
= UPPER16((addr
+ 0x8000));
643 if (last_upper_base_addr
!= upper_base_addr
) {
644 *code_p
++ = MIPS32_LUI(15, upper_base_addr
); /* if needed, change upper address in $15*/
646 last_upper_base_addr
= upper_base_addr
;
649 if (size
== 4) { /* for word write check if one half word is 0 and load it accordingly */
650 if (LOWER16(*buf32
) == 0) {
651 *code_p
++ = MIPS32_LUI(8, UPPER16(*buf32
)); /* load only upper value */
653 } else if (UPPER16(*buf32
) == 0) {
654 *code_p
++ = MIPS32_ORI(8, 0, LOWER16(*buf32
)); /* load only lower value */
657 *code_p
++ = MIPS32_LUI(8, UPPER16(*buf32
)); /* load upper and lower */
658 *code_p
++ = MIPS32_ORI(8, 8, LOWER16(*buf32
));
661 *code_p
++ = MIPS32_SW(8, LOWER16(addr
), 15); /* store word to memory */
665 } else if (size
== 2) {
666 *code_p
++ = MIPS32_ORI(8, 0, *buf16
); /* load lower value */
667 *code_p
++ = MIPS32_SH(8, LOWER16(addr
), 15); /* store half word to memory */
672 *code_p
++ = MIPS32_ORI(8, 0, *buf8
); /* load lower value */
673 *code_p
++ = MIPS32_SB(8, LOWER16(addr
), 15); /* store byte to memory */
681 *code_p
++ = MIPS32_LUI(15, PRACC_UPPER_BASE_ADDR
); /* $15 = MIPS32_PRACC_BASE_ADDR */
682 *code_p
++ = MIPS32_LW(8, PRACC_STACK_OFFSET
, 15); /* restore $8 from pracc stack */
685 *code_p
++ = MIPS32_B(NEG16(code_len
- 1)); /* jump to start */
686 *code_p
= MIPS32_MFC0(15, 31, 0); /* restore $15 from DeSave */
688 retval
= mips32_pracc_exec(ejtag_info
, code_len
, code
, 0, NULL
, 0, NULL
, 1);
689 if (retval
!= ERROR_OK
)
692 count
-= this_round_count
;
700 int mips32_pracc_write_mem(struct mips_ejtag
*ejtag_info
, uint32_t addr
, int size
, int count
, void *buf
)
702 int retval
= mips32_pracc_write_mem_generic(ejtag_info
, addr
, size
, count
, buf
);
703 if (retval
!= ERROR_OK
)
707 * If we are in the cachable regoion and cache is activated,
708 * we must clean D$ + invalidate I$ after we did the write,
709 * so that changes do not continue to live only in D$, but to be
710 * replicated in I$ also (maybe we wrote the istructions)
715 if ((KSEGX(addr
) == KSEG1
) || ((addr
>= 0xff200000) && (addr
<= 0xff3fffff)))
716 return retval
; /*Nothing to do*/
718 mips32_cp0_read(ejtag_info
, &conf
, 16, 0);
720 switch (KSEGX(addr
)) {
722 cached
= (conf
& MIPS32_CONFIG0_KU_MASK
) >> MIPS32_CONFIG0_KU_SHIFT
;
725 cached
= (conf
& MIPS32_CONFIG0_K0_MASK
) >> MIPS32_CONFIG0_K0_SHIFT
;
729 cached
= (conf
& MIPS32_CONFIG0_K23_MASK
) >> MIPS32_CONFIG0_K23_SHIFT
;
737 * Check cachablitiy bits coherency algorithm -
738 * is the region cacheable or uncached.
739 * If cacheable we have to synchronize the cache
742 uint32_t start_addr
, end_addr
;
746 end_addr
= addr
+ count
* size
;
748 /** select cache synchronisation mechanism based on Architecture Release */
749 rel
= (conf
& MIPS32_CONFIG0_AR_MASK
) >> MIPS32_CONFIG0_AR_SHIFT
;
751 case MIPS32_ARCH_REL1
:
752 /* MIPS32/64 Release 1 - we must use cache instruction */
753 mips32_pracc_clean_invalidate_cache(ejtag_info
, start_addr
, end_addr
);
755 case MIPS32_ARCH_REL2
:
756 /* MIPS32/64 Release 2 - we can use synci instruction */
757 mips32_pracc_sync_cache(ejtag_info
, start_addr
, end_addr
);
768 int mips32_pracc_write_regs(struct mips_ejtag
*ejtag_info
, uint32_t *regs
)
770 static const uint32_t code
[] = {
772 MIPS32_LUI(2, UPPER16(MIPS32_PRACC_PARAM_IN
)), /* $2 = MIPS32_PRACC_PARAM_IN */
773 MIPS32_ORI(2, 2, LOWER16(MIPS32_PRACC_PARAM_IN
)),
774 MIPS32_LW(1, 1*4, 2), /* lw $1,1*4($2) */
775 MIPS32_LW(15, 15*4, 2), /* lw $15,15*4($2) */
776 MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
777 MIPS32_LUI(15, UPPER16(MIPS32_PRACC_STACK
)), /* $15 = MIPS32_PRACC_STACK */
778 MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_STACK
)),
779 MIPS32_SW(1, 0, 15), /* sw $1,($15) */
780 MIPS32_LUI(1, UPPER16(MIPS32_PRACC_PARAM_IN
)), /* $1 = MIPS32_PRACC_PARAM_IN */
781 MIPS32_ORI(1, 1, LOWER16(MIPS32_PRACC_PARAM_IN
)),
782 MIPS32_LW(3, 3*4, 1), /* lw $3,3*4($1) */
783 MIPS32_LW(4, 4*4, 1), /* lw $4,4*4($1) */
784 MIPS32_LW(5, 5*4, 1), /* lw $5,5*4($1) */
785 MIPS32_LW(6, 6*4, 1), /* lw $6,6*4($1) */
786 MIPS32_LW(7, 7*4, 1), /* lw $7,7*4($1) */
787 MIPS32_LW(8, 8*4, 1), /* lw $8,8*4($1) */
788 MIPS32_LW(9, 9*4, 1), /* lw $9,9*4($1) */
789 MIPS32_LW(10, 10*4, 1), /* lw $10,10*4($1) */
790 MIPS32_LW(11, 11*4, 1), /* lw $11,11*4($1) */
791 MIPS32_LW(12, 12*4, 1), /* lw $12,12*4($1) */
792 MIPS32_LW(13, 13*4, 1), /* lw $13,13*4($1) */
793 MIPS32_LW(14, 14*4, 1), /* lw $14,14*4($1) */
794 MIPS32_LW(16, 16*4, 1), /* lw $16,16*4($1) */
795 MIPS32_LW(17, 17*4, 1), /* lw $17,17*4($1) */
796 MIPS32_LW(18, 18*4, 1), /* lw $18,18*4($1) */
797 MIPS32_LW(19, 19*4, 1), /* lw $19,19*4($1) */
798 MIPS32_LW(20, 20*4, 1), /* lw $20,20*4($1) */
799 MIPS32_LW(21, 21*4, 1), /* lw $21,21*4($1) */
800 MIPS32_LW(22, 22*4, 1), /* lw $22,22*4($1) */
801 MIPS32_LW(23, 23*4, 1), /* lw $23,23*4($1) */
802 MIPS32_LW(24, 24*4, 1), /* lw $24,24*4($1) */
803 MIPS32_LW(25, 25*4, 1), /* lw $25,25*4($1) */
804 MIPS32_LW(26, 26*4, 1), /* lw $26,26*4($1) */
805 MIPS32_LW(27, 27*4, 1), /* lw $27,27*4($1) */
806 MIPS32_LW(28, 28*4, 1), /* lw $28,28*4($1) */
807 MIPS32_LW(29, 29*4, 1), /* lw $29,29*4($1) */
808 MIPS32_LW(30, 30*4, 1), /* lw $30,30*4($1) */
809 MIPS32_LW(31, 31*4, 1), /* lw $31,31*4($1) */
811 MIPS32_LW(2, 32*4, 1), /* lw $2,32*4($1) */
812 MIPS32_MTC0(2, 12, 0), /* move $2 to status */
813 MIPS32_LW(2, 33*4, 1), /* lw $2,33*4($1) */
814 MIPS32_MTLO(2), /* move $2 to lo */
815 MIPS32_LW(2, 34*4, 1), /* lw $2,34*4($1) */
816 MIPS32_MTHI(2), /* move $2 to hi */
817 MIPS32_LW(2, 35*4, 1), /* lw $2,35*4($1) */
818 MIPS32_MTC0(2, 8, 0), /* move $2 to badvaddr */
819 MIPS32_LW(2, 36*4, 1), /* lw $2,36*4($1) */
820 MIPS32_MTC0(2, 13, 0), /* move $2 to cause*/
821 MIPS32_LW(2, 37*4, 1), /* lw $2,37*4($1) */
822 MIPS32_MTC0(2, 24, 0), /* move $2 to depc (pc) */
824 MIPS32_LW(2, 2*4, 1), /* lw $2,2*4($1) */
825 MIPS32_LW(1, 0, 15), /* lw $1,($15) */
826 MIPS32_B(NEG16(53)), /* b start */
827 MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
832 retval
= mips32_pracc_exec(ejtag_info
, ARRAY_SIZE(code
), code
,
833 MIPS32NUMCOREREGS
, regs
, 0, NULL
, 1);
838 int mips32_pracc_read_regs(struct mips_ejtag
*ejtag_info
, uint32_t *regs
)
840 static const uint32_t code
[] = {
842 MIPS32_MTC0(2, 31, 0), /* move $2 to COP0 DeSave */
843 MIPS32_LUI(2, UPPER16(MIPS32_PRACC_PARAM_OUT
)), /* $2 = MIPS32_PRACC_PARAM_OUT */
844 MIPS32_ORI(2, 2, LOWER16(MIPS32_PRACC_PARAM_OUT
)),
845 MIPS32_SW(0, 0*4, 2), /* sw $0,0*4($2) */
846 MIPS32_SW(1, 1*4, 2), /* sw $1,1*4($2) */
847 MIPS32_SW(15, 15*4, 2), /* sw $15,15*4($2) */
848 MIPS32_MFC0(2, 31, 0), /* move COP0 DeSave to $2 */
849 MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
850 MIPS32_LUI(15, UPPER16(MIPS32_PRACC_STACK
)), /* $15 = MIPS32_PRACC_STACK */
851 MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_STACK
)),
852 MIPS32_SW(1, 0, 15), /* sw $1,($15) */
853 MIPS32_SW(2, 0, 15), /* sw $2,($15) */
854 MIPS32_LUI(1, UPPER16(MIPS32_PRACC_PARAM_OUT
)), /* $1 = MIPS32_PRACC_PARAM_OUT */
855 MIPS32_ORI(1, 1, LOWER16(MIPS32_PRACC_PARAM_OUT
)),
856 MIPS32_SW(2, 2*4, 1), /* sw $2,2*4($1) */
857 MIPS32_SW(3, 3*4, 1), /* sw $3,3*4($1) */
858 MIPS32_SW(4, 4*4, 1), /* sw $4,4*4($1) */
859 MIPS32_SW(5, 5*4, 1), /* sw $5,5*4($1) */
860 MIPS32_SW(6, 6*4, 1), /* sw $6,6*4($1) */
861 MIPS32_SW(7, 7*4, 1), /* sw $7,7*4($1) */
862 MIPS32_SW(8, 8*4, 1), /* sw $8,8*4($1) */
863 MIPS32_SW(9, 9*4, 1), /* sw $9,9*4($1) */
864 MIPS32_SW(10, 10*4, 1), /* sw $10,10*4($1) */
865 MIPS32_SW(11, 11*4, 1), /* sw $11,11*4($1) */
866 MIPS32_SW(12, 12*4, 1), /* sw $12,12*4($1) */
867 MIPS32_SW(13, 13*4, 1), /* sw $13,13*4($1) */
868 MIPS32_SW(14, 14*4, 1), /* sw $14,14*4($1) */
869 MIPS32_SW(16, 16*4, 1), /* sw $16,16*4($1) */
870 MIPS32_SW(17, 17*4, 1), /* sw $17,17*4($1) */
871 MIPS32_SW(18, 18*4, 1), /* sw $18,18*4($1) */
872 MIPS32_SW(19, 19*4, 1), /* sw $19,19*4($1) */
873 MIPS32_SW(20, 20*4, 1), /* sw $20,20*4($1) */
874 MIPS32_SW(21, 21*4, 1), /* sw $21,21*4($1) */
875 MIPS32_SW(22, 22*4, 1), /* sw $22,22*4($1) */
876 MIPS32_SW(23, 23*4, 1), /* sw $23,23*4($1) */
877 MIPS32_SW(24, 24*4, 1), /* sw $24,24*4($1) */
878 MIPS32_SW(25, 25*4, 1), /* sw $25,25*4($1) */
879 MIPS32_SW(26, 26*4, 1), /* sw $26,26*4($1) */
880 MIPS32_SW(27, 27*4, 1), /* sw $27,27*4($1) */
881 MIPS32_SW(28, 28*4, 1), /* sw $28,28*4($1) */
882 MIPS32_SW(29, 29*4, 1), /* sw $29,29*4($1) */
883 MIPS32_SW(30, 30*4, 1), /* sw $30,30*4($1) */
884 MIPS32_SW(31, 31*4, 1), /* sw $31,31*4($1) */
886 MIPS32_MFC0(2, 12, 0), /* move status to $2 */
887 MIPS32_SW(2, 32*4, 1), /* sw $2,32*4($1) */
888 MIPS32_MFLO(2), /* move lo to $2 */
889 MIPS32_SW(2, 33*4, 1), /* sw $2,33*4($1) */
890 MIPS32_MFHI(2), /* move hi to $2 */
891 MIPS32_SW(2, 34*4, 1), /* sw $2,34*4($1) */
892 MIPS32_MFC0(2, 8, 0), /* move badvaddr to $2 */
893 MIPS32_SW(2, 35*4, 1), /* sw $2,35*4($1) */
894 MIPS32_MFC0(2, 13, 0), /* move cause to $2 */
895 MIPS32_SW(2, 36*4, 1), /* sw $2,36*4($1) */
896 MIPS32_MFC0(2, 24, 0), /* move depc (pc) to $2 */
897 MIPS32_SW(2, 37*4, 1), /* sw $2,37*4($1) */
899 MIPS32_LW(2, 0, 15), /* lw $2,($15) */
900 MIPS32_LW(1, 0, 15), /* lw $1,($15) */
901 MIPS32_B(NEG16(58)), /* b start */
902 MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
907 retval
= mips32_pracc_exec(ejtag_info
, ARRAY_SIZE(code
), code
,
908 0, NULL
, MIPS32NUMCOREREGS
, regs
, 1);
913 /* fastdata upload/download requires an initialized working area
914 * to load the download code; it should not be called otherwise
915 * fetch order from the fastdata area
920 int mips32_pracc_fastdata_xfer(struct mips_ejtag
*ejtag_info
, struct working_area
*source
,
921 int write_t
, uint32_t addr
, int count
, uint32_t *buf
)
923 uint32_t handler_code
[] = {
924 /* caution when editing, table is modified below */
925 /* r15 points to the start of this code */
926 MIPS32_SW(8, MIPS32_FASTDATA_HANDLER_SIZE
- 4, 15),
927 MIPS32_SW(9, MIPS32_FASTDATA_HANDLER_SIZE
- 8, 15),
928 MIPS32_SW(10, MIPS32_FASTDATA_HANDLER_SIZE
- 12, 15),
929 MIPS32_SW(11, MIPS32_FASTDATA_HANDLER_SIZE
- 16, 15),
930 /* start of fastdata area in t0 */
931 MIPS32_LUI(8, UPPER16(MIPS32_PRACC_FASTDATA_AREA
)),
932 MIPS32_ORI(8, 8, LOWER16(MIPS32_PRACC_FASTDATA_AREA
)),
933 MIPS32_LW(9, 0, 8), /* start addr in t1 */
934 MIPS32_LW(10, 0, 8), /* end addr to t2 */
936 /* 8 */ MIPS32_LW(11, 0, 0), /* lw t3,[t8 | r9] */
937 /* 9 */ MIPS32_SW(11, 0, 0), /* sw t3,[r9 | r8] */
938 MIPS32_BNE(10, 9, NEG16(3)), /* bne $t2,t1,loop */
939 MIPS32_ADDI(9, 9, 4), /* addi t1,t1,4 */
941 MIPS32_LW(8, MIPS32_FASTDATA_HANDLER_SIZE
- 4, 15),
942 MIPS32_LW(9, MIPS32_FASTDATA_HANDLER_SIZE
- 8, 15),
943 MIPS32_LW(10, MIPS32_FASTDATA_HANDLER_SIZE
- 12, 15),
944 MIPS32_LW(11, MIPS32_FASTDATA_HANDLER_SIZE
- 16, 15),
946 MIPS32_LUI(15, UPPER16(MIPS32_PRACC_TEXT
)),
947 MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_TEXT
)),
948 MIPS32_JR(15), /* jr start */
949 MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
952 uint32_t jmp_code
[] = {
953 MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
954 /* 1 */ MIPS32_LUI(15, 0), /* addr of working area added below */
955 /* 2 */ MIPS32_ORI(15, 15, 0), /* addr of working area added below */
956 MIPS32_JR(15), /* jump to ram program */
961 uint32_t val
, ejtag_ctrl
, address
;
963 if (source
->size
< MIPS32_FASTDATA_HANDLER_SIZE
)
964 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
967 handler_code
[8] = MIPS32_LW(11, 0, 8); /* load data from probe at fastdata area */
968 handler_code
[9] = MIPS32_SW(11, 0, 9); /* store data to RAM @ r9 */
970 handler_code
[8] = MIPS32_LW(11, 0, 9); /* load data from RAM @ r9 */
971 handler_code
[9] = MIPS32_SW(11, 0, 8); /* store data to probe at fastdata area */
974 /* write program into RAM */
975 if (write_t
!= ejtag_info
->fast_access_save
) {
976 mips32_pracc_write_mem_generic(ejtag_info
, source
->address
, 4, ARRAY_SIZE(handler_code
), handler_code
);
977 /* save previous operation to speed to any consecutive read/writes */
978 ejtag_info
->fast_access_save
= write_t
;
981 LOG_DEBUG("%s using 0x%.8" PRIx32
" for write handler", __func__
, source
->address
);
983 jmp_code
[1] |= UPPER16(source
->address
);
984 jmp_code
[2] |= LOWER16(source
->address
);
986 for (i
= 0; i
< (int) ARRAY_SIZE(jmp_code
); i
++) {
987 retval
= wait_for_pracc_rw(ejtag_info
, &ejtag_ctrl
);
988 if (retval
!= ERROR_OK
)
991 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_DATA
);
992 mips_ejtag_drscan_32_out(ejtag_info
, jmp_code
[i
]);
994 /* Clear the access pending bit (let the processor eat!) */
995 ejtag_ctrl
= ejtag_info
->ejtag_ctrl
& ~EJTAG_CTRL_PRACC
;
996 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_CONTROL
);
997 mips_ejtag_drscan_32_out(ejtag_info
, ejtag_ctrl
);
1000 retval
= wait_for_pracc_rw(ejtag_info
, &ejtag_ctrl
);
1001 if (retval
!= ERROR_OK
)
1004 /* next fetch to dmseg should be in FASTDATA_AREA, check */
1006 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_ADDRESS
);
1007 retval
= mips_ejtag_drscan_32(ejtag_info
, &address
);
1008 if (retval
!= ERROR_OK
)
1011 if (address
!= MIPS32_PRACC_FASTDATA_AREA
)
1014 /* wait PrAcc pending bit for FASTDATA write */
1015 retval
= wait_for_pracc_rw(ejtag_info
, &ejtag_ctrl
);
1016 if (retval
!= ERROR_OK
)
1019 /* Send the load start address */
1021 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_FASTDATA
);
1022 mips_ejtag_fastdata_scan(ejtag_info
, 1, &val
);
1024 /* Send the load end address */
1025 val
= addr
+ (count
- 1) * 4;
1026 mips_ejtag_fastdata_scan(ejtag_info
, 1, &val
);
1028 for (i
= 0; i
< count
; i
++) {
1029 retval
= mips_ejtag_fastdata_scan(ejtag_info
, write_t
, buf
++);
1030 if (retval
!= ERROR_OK
)
1034 retval
= jtag_execute_queue();
1035 if (retval
!= ERROR_OK
) {
1036 LOG_ERROR("fastdata load failed");
1040 retval
= wait_for_pracc_rw(ejtag_info
, &ejtag_ctrl
);
1041 if (retval
!= ERROR_OK
)
1045 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_ADDRESS
);
1046 retval
= mips_ejtag_drscan_32(ejtag_info
, &address
);
1047 if (retval
!= ERROR_OK
)
1050 if (address
!= MIPS32_PRACC_TEXT
)
1051 LOG_ERROR("mini program did not return to start");