Remove FSF address from GPL notices
[openocd.git] / src / svf / svf.c
blob5f95b0c6072295f63a771d770745d44fa716d8f4
1 /***************************************************************************
2 * Copyright (C) 2009 by Simon Qian *
3 * SimonQian@SimonQian.com *
4 * *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
9 * *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
14 * *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
17 ***************************************************************************/
19 /* The specification for SVF is available here:
20 * http://www.asset-intertech.com/support/svf.pdf
21 * Below, this document is refered to as the "SVF spec".
23 * The specification for XSVF is available here:
24 * http://www.xilinx.com/support/documentation/application_notes/xapp503.pdf
25 * Below, this document is refered to as the "XSVF spec".
28 #ifdef HAVE_CONFIG_H
29 #include "config.h"
30 #endif
32 #include <jtag/jtag.h>
33 #include "svf.h"
34 #include <helper/time_support.h>
36 /* SVF command */
37 enum svf_command {
38 ENDDR,
39 ENDIR,
40 FREQUENCY,
41 HDR,
42 HIR,
43 PIO,
44 PIOMAP,
45 RUNTEST,
46 SDR,
47 SIR,
48 STATE,
49 TDR,
50 TIR,
51 TRST,
54 static const char *svf_command_name[14] = {
55 "ENDDR",
56 "ENDIR",
57 "FREQUENCY",
58 "HDR",
59 "HIR",
60 "PIO",
61 "PIOMAP",
62 "RUNTEST",
63 "SDR",
64 "SIR",
65 "STATE",
66 "TDR",
67 "TIR",
68 "TRST"
71 enum trst_mode {
72 TRST_ON,
73 TRST_OFF,
74 TRST_Z,
75 TRST_ABSENT
78 static const char *svf_trst_mode_name[4] = {
79 "ON",
80 "OFF",
81 "Z",
82 "ABSENT"
85 struct svf_statemove {
86 tap_state_t from;
87 tap_state_t to;
88 uint32_t num_of_moves;
89 tap_state_t paths[8];
93 * These paths are from the SVF specification for the STATE command, to be
94 * used when the STATE command only includes the final state. The first
95 * element of the path is the "from" (current) state, and the last one is
96 * the "to" (target) state.
98 * All specified paths are the shortest ones in the JTAG spec, and are thus
99 * not (!!) exact matches for the paths used elsewhere in OpenOCD. Note
100 * that PAUSE-to-PAUSE transitions all go through UPDATE and then CAPTURE,
101 * which has specific effects on the various registers; they are not NOPs.
103 * Paths to RESET are disabled here. As elsewhere in OpenOCD, and in XSVF
104 * and many SVF implementations, we don't want to risk missing that state.
105 * To get to RESET, always we ignore the current state.
107 static const struct svf_statemove svf_statemoves[] = {
108 /* from to num_of_moves, paths[8] */
109 /* {TAP_RESET, TAP_RESET, 1, {TAP_RESET}}, */
110 {TAP_RESET, TAP_IDLE, 2, {TAP_RESET, TAP_IDLE} },
111 {TAP_RESET, TAP_DRPAUSE, 6, {TAP_RESET, TAP_IDLE, TAP_DRSELECT,
112 TAP_DRCAPTURE, TAP_DREXIT1, TAP_DRPAUSE} },
113 {TAP_RESET, TAP_IRPAUSE, 7, {TAP_RESET, TAP_IDLE, TAP_DRSELECT,
114 TAP_IRSELECT, TAP_IRCAPTURE,
115 TAP_IREXIT1, TAP_IRPAUSE} },
117 /* {TAP_IDLE, TAP_RESET, 4, {TAP_IDLE,
118 * TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
119 {TAP_IDLE, TAP_IDLE, 1, {TAP_IDLE} },
120 {TAP_IDLE, TAP_DRPAUSE, 5, {TAP_IDLE, TAP_DRSELECT, TAP_DRCAPTURE,
121 TAP_DREXIT1, TAP_DRPAUSE} },
122 {TAP_IDLE, TAP_IRPAUSE, 6, {TAP_IDLE, TAP_DRSELECT, TAP_IRSELECT,
123 TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} },
125 /* {TAP_DRPAUSE, TAP_RESET, 6, {TAP_DRPAUSE,
126 * TAP_DREXIT2, TAP_DRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
127 {TAP_DRPAUSE, TAP_IDLE, 4, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
128 TAP_IDLE} },
129 {TAP_DRPAUSE, TAP_DRPAUSE, 7, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
130 TAP_DRSELECT, TAP_DRCAPTURE,
131 TAP_DREXIT1, TAP_DRPAUSE} },
132 {TAP_DRPAUSE, TAP_IRPAUSE, 8, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
133 TAP_DRSELECT, TAP_IRSELECT,
134 TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} },
136 /* {TAP_IRPAUSE, TAP_RESET, 6, {TAP_IRPAUSE,
137 * TAP_IREXIT2, TAP_IRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
138 {TAP_IRPAUSE, TAP_IDLE, 4, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
139 TAP_IDLE} },
140 {TAP_IRPAUSE, TAP_DRPAUSE, 7, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
141 TAP_DRSELECT, TAP_DRCAPTURE,
142 TAP_DREXIT1, TAP_DRPAUSE} },
143 {TAP_IRPAUSE, TAP_IRPAUSE, 8, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
144 TAP_DRSELECT, TAP_IRSELECT,
145 TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} }
148 #define XXR_TDI (1 << 0)
149 #define XXR_TDO (1 << 1)
150 #define XXR_MASK (1 << 2)
151 #define XXR_SMASK (1 << 3)
152 struct svf_xxr_para {
153 int len;
154 int data_mask;
155 uint8_t *tdi;
156 uint8_t *tdo;
157 uint8_t *mask;
158 uint8_t *smask;
161 struct svf_para {
162 float frequency;
163 tap_state_t ir_end_state;
164 tap_state_t dr_end_state;
165 tap_state_t runtest_run_state;
166 tap_state_t runtest_end_state;
167 enum trst_mode trst_mode;
169 struct svf_xxr_para hir_para;
170 struct svf_xxr_para hdr_para;
171 struct svf_xxr_para tir_para;
172 struct svf_xxr_para tdr_para;
173 struct svf_xxr_para sir_para;
174 struct svf_xxr_para sdr_para;
177 static struct svf_para svf_para;
178 static const struct svf_para svf_para_init = {
179 /* frequency, ir_end_state, dr_end_state, runtest_run_state, runtest_end_state, trst_mode */
180 0, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TRST_Z,
181 /* hir_para */
182 /* {len, data_mask, tdi, tdo, mask, smask}, */
183 {0, 0, NULL, NULL, NULL, NULL},
184 /* hdr_para */
185 /* {len, data_mask, tdi, tdo, mask, smask}, */
186 {0, 0, NULL, NULL, NULL, NULL},
187 /* tir_para */
188 /* {len, data_mask, tdi, tdo, mask, smask}, */
189 {0, 0, NULL, NULL, NULL, NULL},
190 /* tdr_para */
191 /* {len, data_mask, tdi, tdo, mask, smask}, */
192 {0, 0, NULL, NULL, NULL, NULL},
193 /* sir_para */
194 /* {len, data_mask, tdi, tdo, mask, smask}, */
195 {0, 0, NULL, NULL, NULL, NULL},
196 /* sdr_para */
197 /* {len, data_mask, tdi, tdo, mask, smask}, */
198 {0, 0, NULL, NULL, NULL, NULL},
201 struct svf_check_tdo_para {
202 int line_num; /* used to record line number of the check operation */
203 /* so more information could be printed */
204 int enabled; /* check is enabled or not */
205 int buffer_offset; /* buffer_offset to buffers */
206 int bit_len; /* bit length to check */
209 #define SVF_CHECK_TDO_PARA_SIZE 1024
210 static struct svf_check_tdo_para *svf_check_tdo_para;
211 static int svf_check_tdo_para_index;
213 static int svf_read_command_from_file(FILE *fd);
214 static int svf_check_tdo(void);
215 static int svf_add_check_para(uint8_t enabled, int buffer_offset, int bit_len);
216 static int svf_run_command(struct command_context *cmd_ctx, char *cmd_str);
217 static int svf_execute_tap(void);
219 static FILE *svf_fd;
220 static char *svf_read_line;
221 static size_t svf_read_line_size;
222 static char *svf_command_buffer;
223 static size_t svf_command_buffer_size;
224 static int svf_line_number;
225 static int svf_getline(char **lineptr, size_t *n, FILE *stream);
227 #define SVF_MAX_BUFFER_SIZE_TO_COMMIT (1024 * 1024)
228 static uint8_t *svf_tdi_buffer, *svf_tdo_buffer, *svf_mask_buffer;
229 static int svf_buffer_index, svf_buffer_size ;
230 static int svf_quiet;
231 static int svf_nil;
232 static int svf_ignore_error;
234 /* Targetting particular tap */
235 static int svf_tap_is_specified;
236 static int svf_set_padding(struct svf_xxr_para *para, int len, unsigned char tdi);
238 /* Progress Indicator */
239 static int svf_progress_enabled;
240 static long svf_total_lines;
241 static int svf_percentage;
242 static int svf_last_printed_percentage = -1;
245 * macro is used to print the svf hex buffer at desired debug level
246 * DEBUG, INFO, ERROR, USER
248 #define SVF_BUF_LOG(_lvl, _buf, _nbits, _desc) \
249 svf_hexbuf_print(LOG_LVL_##_lvl , __FILE__, __LINE__, __func__, _buf, _nbits, _desc)
251 static void svf_hexbuf_print(int dbg_lvl, const char *file, unsigned line,
252 const char *function, const uint8_t *buf,
253 int bit_len, const char *desc)
255 int j, len = 0;
256 int byte_len = DIV_ROUND_UP(bit_len, 8);
257 int msbits = bit_len % 8;
259 /* allocate 2 bytes per hex digit */
260 char *prbuf = malloc((byte_len * 2) + 2 + 1);
261 if (!prbuf)
262 return;
264 /* print correct number of bytes, mask excess bits where applicable */
265 uint8_t msb = buf[byte_len - 1] & (msbits ? (1 << msbits) - 1 : 0xff);
266 len = sprintf(prbuf, msbits <= 4 ? "0x%01"PRIx8 : "0x%02"PRIx8, msb);
267 for (j = byte_len - 2; j >= 0; j--)
268 len += sprintf(prbuf + len, "%02"PRIx8, buf[j]);
270 log_printf_lf(dbg_lvl, file, line, function, "%8s = %s", desc ? desc : " ", prbuf);
272 free(prbuf);
275 static int svf_realloc_buffers(size_t len)
277 void *ptr;
279 if (svf_execute_tap() != ERROR_OK)
280 return ERROR_FAIL;
282 ptr = realloc(svf_tdi_buffer, len);
283 if (!ptr)
284 return ERROR_FAIL;
285 svf_tdi_buffer = ptr;
287 ptr = realloc(svf_tdo_buffer, len);
288 if (!ptr)
289 return ERROR_FAIL;
290 svf_tdo_buffer = ptr;
292 ptr = realloc(svf_mask_buffer, len);
293 if (!ptr)
294 return ERROR_FAIL;
295 svf_mask_buffer = ptr;
297 svf_buffer_size = len;
299 return ERROR_OK;
302 static void svf_free_xxd_para(struct svf_xxr_para *para)
304 if (NULL != para) {
305 if (para->tdi != NULL) {
306 free(para->tdi);
307 para->tdi = NULL;
309 if (para->tdo != NULL) {
310 free(para->tdo);
311 para->tdo = NULL;
313 if (para->mask != NULL) {
314 free(para->mask);
315 para->mask = NULL;
317 if (para->smask != NULL) {
318 free(para->smask);
319 para->smask = NULL;
324 int svf_add_statemove(tap_state_t state_to)
326 tap_state_t state_from = cmd_queue_cur_state;
327 unsigned index_var;
329 /* when resetting, be paranoid and ignore current state */
330 if (state_to == TAP_RESET) {
331 if (svf_nil)
332 return ERROR_OK;
334 jtag_add_tlr();
335 return ERROR_OK;
338 for (index_var = 0; index_var < ARRAY_SIZE(svf_statemoves); index_var++) {
339 if ((svf_statemoves[index_var].from == state_from)
340 && (svf_statemoves[index_var].to == state_to)) {
341 if (svf_nil)
342 continue;
343 /* recorded path includes current state ... avoid
344 *extra TCKs! */
345 if (svf_statemoves[index_var].num_of_moves > 1)
346 jtag_add_pathmove(svf_statemoves[index_var].num_of_moves - 1,
347 svf_statemoves[index_var].paths + 1);
348 else
349 jtag_add_pathmove(svf_statemoves[index_var].num_of_moves,
350 svf_statemoves[index_var].paths);
351 return ERROR_OK;
354 LOG_ERROR("SVF: can not move to %s", tap_state_name(state_to));
355 return ERROR_FAIL;
358 COMMAND_HANDLER(handle_svf_command)
360 #define SVF_MIN_NUM_OF_OPTIONS 1
361 #define SVF_MAX_NUM_OF_OPTIONS 5
362 int command_num = 0;
363 int ret = ERROR_OK;
364 long long time_measure_ms;
365 int time_measure_s, time_measure_m;
367 /* use NULL to indicate a "plain" svf file which accounts for
368 * any additional devices in the scan chain, otherwise the device
369 * that should be affected
371 struct jtag_tap *tap = NULL;
373 if ((CMD_ARGC < SVF_MIN_NUM_OF_OPTIONS) || (CMD_ARGC > SVF_MAX_NUM_OF_OPTIONS))
374 return ERROR_COMMAND_SYNTAX_ERROR;
376 /* parse command line */
377 svf_quiet = 0;
378 svf_nil = 0;
379 svf_progress_enabled = 0;
380 svf_ignore_error = 0;
381 for (unsigned int i = 0; i < CMD_ARGC; i++) {
382 if (strcmp(CMD_ARGV[i], "-tap") == 0) {
383 tap = jtag_tap_by_string(CMD_ARGV[i+1]);
384 if (!tap) {
385 command_print(CMD_CTX, "Tap: %s unknown", CMD_ARGV[i+1]);
386 return ERROR_FAIL;
388 i++;
389 } else if ((strcmp(CMD_ARGV[i],
390 "quiet") == 0) || (strcmp(CMD_ARGV[i], "-quiet") == 0))
391 svf_quiet = 1;
392 else if ((strcmp(CMD_ARGV[i], "nil") == 0) || (strcmp(CMD_ARGV[i], "-nil") == 0))
393 svf_nil = 1;
394 else if ((strcmp(CMD_ARGV[i],
395 "progress") == 0) || (strcmp(CMD_ARGV[i], "-progress") == 0))
396 svf_progress_enabled = 1;
397 else if ((strcmp(CMD_ARGV[i],
398 "ignore_error") == 0) || (strcmp(CMD_ARGV[i], "-ignore_error") == 0))
399 svf_ignore_error = 1;
400 else {
401 svf_fd = fopen(CMD_ARGV[i], "r");
402 if (svf_fd == NULL) {
403 int err = errno;
404 command_print(CMD_CTX, "open(\"%s\"): %s", CMD_ARGV[i], strerror(err));
405 /* no need to free anything now */
406 return ERROR_COMMAND_SYNTAX_ERROR;
407 } else
408 LOG_USER("svf processing file: \"%s\"", CMD_ARGV[i]);
412 if (svf_fd == NULL)
413 return ERROR_COMMAND_SYNTAX_ERROR;
415 /* get time */
416 time_measure_ms = timeval_ms();
418 /* init */
419 svf_line_number = 0;
420 svf_command_buffer_size = 0;
422 svf_check_tdo_para_index = 0;
423 svf_check_tdo_para = malloc(sizeof(struct svf_check_tdo_para) * SVF_CHECK_TDO_PARA_SIZE);
424 if (NULL == svf_check_tdo_para) {
425 LOG_ERROR("not enough memory");
426 ret = ERROR_FAIL;
427 goto free_all;
430 svf_buffer_index = 0;
431 /* double the buffer size */
432 /* in case current command cannot be committed, and next command is a bit scan command */
433 /* here is 32K bits for this big scan command, it should be enough */
434 /* buffer will be reallocated if buffer size is not enough */
435 if (svf_realloc_buffers(2 * SVF_MAX_BUFFER_SIZE_TO_COMMIT) != ERROR_OK) {
436 ret = ERROR_FAIL;
437 goto free_all;
440 memcpy(&svf_para, &svf_para_init, sizeof(svf_para));
442 if (!svf_nil) {
443 /* TAP_RESET */
444 jtag_add_tlr();
447 if (tap) {
448 /* Tap is specified, set header/trailer paddings */
449 int header_ir_len = 0, header_dr_len = 0, trailer_ir_len = 0, trailer_dr_len = 0;
450 struct jtag_tap *check_tap;
452 svf_tap_is_specified = 1;
454 for (check_tap = jtag_all_taps(); check_tap; check_tap = check_tap->next_tap) {
455 if (check_tap->abs_chain_position < tap->abs_chain_position) {
456 /* Header */
457 header_ir_len += check_tap->ir_length;
458 header_dr_len++;
459 } else if (check_tap->abs_chain_position > tap->abs_chain_position) {
460 /* Trailer */
461 trailer_ir_len += check_tap->ir_length;
462 trailer_dr_len++;
466 /* HDR %d TDI (0) */
467 if (ERROR_OK != svf_set_padding(&svf_para.hdr_para, header_dr_len, 0)) {
468 LOG_ERROR("failed to set data header");
469 return ERROR_FAIL;
472 /* HIR %d TDI (0xFF) */
473 if (ERROR_OK != svf_set_padding(&svf_para.hir_para, header_ir_len, 0xFF)) {
474 LOG_ERROR("failed to set instruction header");
475 return ERROR_FAIL;
478 /* TDR %d TDI (0) */
479 if (ERROR_OK != svf_set_padding(&svf_para.tdr_para, trailer_dr_len, 0)) {
480 LOG_ERROR("failed to set data trailer");
481 return ERROR_FAIL;
484 /* TIR %d TDI (0xFF) */
485 if (ERROR_OK != svf_set_padding(&svf_para.tir_para, trailer_ir_len, 0xFF)) {
486 LOG_ERROR("failed to set instruction trailer");
487 return ERROR_FAIL;
491 if (svf_progress_enabled) {
492 /* Count total lines in file. */
493 while (!feof(svf_fd)) {
494 svf_getline(&svf_command_buffer, &svf_command_buffer_size, svf_fd);
495 svf_total_lines++;
497 rewind(svf_fd);
499 while (ERROR_OK == svf_read_command_from_file(svf_fd)) {
500 /* Log Output */
501 if (svf_quiet) {
502 if (svf_progress_enabled) {
503 svf_percentage = ((svf_line_number * 20) / svf_total_lines) * 5;
504 if (svf_last_printed_percentage != svf_percentage) {
505 LOG_USER_N("\r%d%% ", svf_percentage);
506 svf_last_printed_percentage = svf_percentage;
509 } else {
510 if (svf_progress_enabled) {
511 svf_percentage = ((svf_line_number * 20) / svf_total_lines) * 5;
512 LOG_USER_N("%3d%% %s", svf_percentage, svf_read_line);
513 } else
514 LOG_USER_N("%s", svf_read_line);
516 /* Run Command */
517 if (ERROR_OK != svf_run_command(CMD_CTX, svf_command_buffer)) {
518 LOG_ERROR("fail to run command at line %d", svf_line_number);
519 ret = ERROR_FAIL;
520 break;
522 command_num++;
525 if ((!svf_nil) && (ERROR_OK != jtag_execute_queue()))
526 ret = ERROR_FAIL;
527 else if (ERROR_OK != svf_check_tdo())
528 ret = ERROR_FAIL;
530 /* print time */
531 time_measure_ms = timeval_ms() - time_measure_ms;
532 time_measure_s = time_measure_ms / 1000;
533 time_measure_ms %= 1000;
534 time_measure_m = time_measure_s / 60;
535 time_measure_s %= 60;
536 if (time_measure_ms < 1000)
537 command_print(CMD_CTX,
538 "\r\nTime used: %dm%ds%lldms ",
539 time_measure_m,
540 time_measure_s,
541 time_measure_ms);
543 free_all:
545 fclose(svf_fd);
546 svf_fd = 0;
548 /* free buffers */
549 if (svf_command_buffer) {
550 free(svf_command_buffer);
551 svf_command_buffer = NULL;
552 svf_command_buffer_size = 0;
554 if (svf_check_tdo_para) {
555 free(svf_check_tdo_para);
556 svf_check_tdo_para = NULL;
557 svf_check_tdo_para_index = 0;
559 if (svf_tdi_buffer) {
560 free(svf_tdi_buffer);
561 svf_tdi_buffer = NULL;
563 if (svf_tdo_buffer) {
564 free(svf_tdo_buffer);
565 svf_tdo_buffer = NULL;
567 if (svf_mask_buffer) {
568 free(svf_mask_buffer);
569 svf_mask_buffer = NULL;
571 svf_buffer_index = 0;
572 svf_buffer_size = 0;
574 svf_free_xxd_para(&svf_para.hdr_para);
575 svf_free_xxd_para(&svf_para.hir_para);
576 svf_free_xxd_para(&svf_para.tdr_para);
577 svf_free_xxd_para(&svf_para.tir_para);
578 svf_free_xxd_para(&svf_para.sdr_para);
579 svf_free_xxd_para(&svf_para.sir_para);
581 if (ERROR_OK == ret)
582 command_print(CMD_CTX,
583 "svf file programmed %s for %d commands with %d errors",
584 (svf_ignore_error > 1) ? "unsuccessfully" : "successfully",
585 command_num,
586 (svf_ignore_error > 1) ? (svf_ignore_error - 1) : 0);
587 else
588 command_print(CMD_CTX, "svf file programmed failed");
590 svf_ignore_error = 0;
591 return ret;
594 static int svf_getline(char **lineptr, size_t *n, FILE *stream)
596 #define MIN_CHUNK 16 /* Buffer is increased by this size each time as required */
597 size_t i = 0;
599 if (*lineptr == NULL) {
600 *n = MIN_CHUNK;
601 *lineptr = malloc(*n);
602 if (!*lineptr)
603 return -1;
606 (*lineptr)[0] = fgetc(stream);
607 while ((*lineptr)[i] != '\n') {
608 (*lineptr)[++i] = fgetc(stream);
609 if (feof(stream)) {
610 (*lineptr)[0] = 0;
611 return -1;
613 if ((i + 2) > *n) {
614 *n += MIN_CHUNK;
615 *lineptr = realloc(*lineptr, *n);
619 (*lineptr)[++i] = 0;
621 return sizeof(*lineptr);
624 #define SVFP_CMD_INC_CNT 1024
625 static int svf_read_command_from_file(FILE *fd)
627 unsigned char ch;
628 int i = 0;
629 size_t cmd_pos = 0;
630 int cmd_ok = 0, slash = 0;
632 if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
633 return ERROR_FAIL;
634 svf_line_number++;
635 ch = svf_read_line[0];
636 while (!cmd_ok && (ch != 0)) {
637 switch (ch) {
638 case '!':
639 slash = 0;
640 if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
641 return ERROR_FAIL;
642 svf_line_number++;
643 i = -1;
644 break;
645 case '/':
646 if (++slash == 2) {
647 slash = 0;
648 if (svf_getline(&svf_read_line, &svf_read_line_size,
649 svf_fd) <= 0)
650 return ERROR_FAIL;
651 svf_line_number++;
652 i = -1;
654 break;
655 case ';':
656 slash = 0;
657 cmd_ok = 1;
658 break;
659 case '\n':
660 svf_line_number++;
661 if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
662 return ERROR_FAIL;
663 i = -1;
664 case '\r':
665 slash = 0;
666 /* Don't save '\r' and '\n' if no data is parsed */
667 if (!cmd_pos)
668 break;
669 default:
670 /* The parsing code currently expects a space
671 * before parentheses -- "TDI (123)". Also a
672 * space afterwards -- "TDI (123) TDO(456)".
673 * But such spaces are optional... instead of
674 * parser updates, cope with that by adding the
675 * spaces as needed.
677 * Ensure there are 3 bytes available, for:
678 * - current character
679 * - added space.
680 * - terminating NUL ('\0')
682 if (cmd_pos + 3 > svf_command_buffer_size) {
683 svf_command_buffer = realloc(svf_command_buffer, cmd_pos + 3);
684 svf_command_buffer_size = cmd_pos + 3;
685 if (svf_command_buffer == NULL) {
686 LOG_ERROR("not enough memory");
687 return ERROR_FAIL;
691 /* insert a space before '(' */
692 if ('(' == ch)
693 svf_command_buffer[cmd_pos++] = ' ';
695 svf_command_buffer[cmd_pos++] = (char)toupper(ch);
697 /* insert a space after ')' */
698 if (')' == ch)
699 svf_command_buffer[cmd_pos++] = ' ';
700 break;
702 ch = svf_read_line[++i];
705 if (cmd_ok) {
706 svf_command_buffer[cmd_pos] = '\0';
707 return ERROR_OK;
708 } else
709 return ERROR_FAIL;
712 static int svf_parse_cmd_string(char *str, int len, char **argus, int *num_of_argu)
714 int pos = 0, num = 0, space_found = 1, in_bracket = 0;
716 while (pos < len) {
717 switch (str[pos]) {
718 case '!':
719 case '/':
720 LOG_ERROR("fail to parse svf command");
721 return ERROR_FAIL;
722 case '(':
723 in_bracket = 1;
724 goto parse_char;
725 case ')':
726 in_bracket = 0;
727 goto parse_char;
728 default:
729 parse_char:
730 if (!in_bracket && isspace((int) str[pos])) {
731 space_found = 1;
732 str[pos] = '\0';
733 } else if (space_found) {
734 argus[num++] = &str[pos];
735 space_found = 0;
737 break;
739 pos++;
742 *num_of_argu = num;
744 return ERROR_OK;
747 bool svf_tap_state_is_stable(tap_state_t state)
749 return (TAP_RESET == state) || (TAP_IDLE == state)
750 || (TAP_DRPAUSE == state) || (TAP_IRPAUSE == state);
753 static int svf_find_string_in_array(char *str, char **strs, int num_of_element)
755 int i;
757 for (i = 0; i < num_of_element; i++) {
758 if (!strcmp(str, strs[i]))
759 return i;
761 return 0xFF;
764 static int svf_adjust_array_length(uint8_t **arr, int orig_bit_len, int new_bit_len)
766 int new_byte_len = (new_bit_len + 7) >> 3;
768 if ((NULL == *arr) || (((orig_bit_len + 7) >> 3) < ((new_bit_len + 7) >> 3))) {
769 if (*arr != NULL) {
770 free(*arr);
771 *arr = NULL;
773 *arr = malloc(new_byte_len);
774 if (NULL == *arr) {
775 LOG_ERROR("not enough memory");
776 return ERROR_FAIL;
778 memset(*arr, 0, new_byte_len);
780 return ERROR_OK;
783 static int svf_set_padding(struct svf_xxr_para *para, int len, unsigned char tdi)
785 int error = ERROR_OK;
786 error |= svf_adjust_array_length(&para->tdi, para->len, len);
787 memset(para->tdi, tdi, (len + 7) >> 3);
788 error |= svf_adjust_array_length(&para->tdo, para->len, len);
789 error |= svf_adjust_array_length(&para->mask, para->len, len);
790 para->len = len;
791 para->data_mask = XXR_TDI;
793 return error;
796 static int svf_copy_hexstring_to_binary(char *str, uint8_t **bin, int orig_bit_len, int bit_len)
798 int i, str_len = strlen(str), str_hbyte_len = (bit_len + 3) >> 2;
799 uint8_t ch = 0;
801 if (ERROR_OK != svf_adjust_array_length(bin, orig_bit_len, bit_len)) {
802 LOG_ERROR("fail to adjust length of array");
803 return ERROR_FAIL;
806 /* fill from LSB (end of str) to MSB (beginning of str) */
807 for (i = 0; i < str_hbyte_len; i++) {
808 ch = 0;
809 while (str_len > 0) {
810 ch = str[--str_len];
812 /* Skip whitespace. The SVF specification (rev E) is
813 * deficient in terms of basic lexical issues like
814 * where whitespace is allowed. Long bitstrings may
815 * require line ends for correctness, since there is
816 * a hard limit on line length.
818 if (!isspace(ch)) {
819 if ((ch >= '0') && (ch <= '9')) {
820 ch = ch - '0';
821 break;
822 } else if ((ch >= 'A') && (ch <= 'F')) {
823 ch = ch - 'A' + 10;
824 break;
825 } else {
826 LOG_ERROR("invalid hex string");
827 return ERROR_FAIL;
831 ch = 0;
834 /* write bin */
835 if (i % 2) {
836 /* MSB */
837 (*bin)[i / 2] |= ch << 4;
838 } else {
839 /* LSB */
840 (*bin)[i / 2] = 0;
841 (*bin)[i / 2] |= ch;
845 /* consume optional leading '0' MSBs or whitespace */
846 while (str_len > 0 && ((str[str_len - 1] == '0')
847 || isspace((int) str[str_len - 1])))
848 str_len--;
850 /* check validity: we must have consumed everything */
851 if (str_len > 0 || (ch & ~((2 << ((bit_len - 1) % 4)) - 1)) != 0) {
852 LOG_ERROR("value execeeds length");
853 return ERROR_FAIL;
856 return ERROR_OK;
859 static int svf_check_tdo(void)
861 int i, len, index_var;
863 for (i = 0; i < svf_check_tdo_para_index; i++) {
864 index_var = svf_check_tdo_para[i].buffer_offset;
865 len = svf_check_tdo_para[i].bit_len;
866 if ((svf_check_tdo_para[i].enabled)
867 && buf_cmp_mask(&svf_tdi_buffer[index_var], &svf_tdo_buffer[index_var],
868 &svf_mask_buffer[index_var], len)) {
869 LOG_ERROR("tdo check error at line %d",
870 svf_check_tdo_para[i].line_num);
871 SVF_BUF_LOG(ERROR, &svf_tdi_buffer[index_var], len, "READ");
872 SVF_BUF_LOG(ERROR, &svf_tdo_buffer[index_var], len, "WANT");
873 SVF_BUF_LOG(ERROR, &svf_mask_buffer[index_var], len, "MASK");
875 if (svf_ignore_error == 0)
876 return ERROR_FAIL;
877 else
878 svf_ignore_error++;
881 svf_check_tdo_para_index = 0;
883 return ERROR_OK;
886 static int svf_add_check_para(uint8_t enabled, int buffer_offset, int bit_len)
888 if (svf_check_tdo_para_index >= SVF_CHECK_TDO_PARA_SIZE) {
889 LOG_ERROR("toooooo many operation undone");
890 return ERROR_FAIL;
893 svf_check_tdo_para[svf_check_tdo_para_index].line_num = svf_line_number;
894 svf_check_tdo_para[svf_check_tdo_para_index].bit_len = bit_len;
895 svf_check_tdo_para[svf_check_tdo_para_index].enabled = enabled;
896 svf_check_tdo_para[svf_check_tdo_para_index].buffer_offset = buffer_offset;
897 svf_check_tdo_para_index++;
899 return ERROR_OK;
902 static int svf_execute_tap(void)
904 if ((!svf_nil) && (ERROR_OK != jtag_execute_queue()))
905 return ERROR_FAIL;
906 else if (ERROR_OK != svf_check_tdo())
907 return ERROR_FAIL;
909 svf_buffer_index = 0;
911 return ERROR_OK;
914 static int svf_run_command(struct command_context *cmd_ctx, char *cmd_str)
916 char *argus[256], command;
917 int num_of_argu = 0, i;
919 /* tmp variable */
920 int i_tmp;
922 /* for RUNTEST */
923 int run_count;
924 float min_time;
925 /* for XXR */
926 struct svf_xxr_para *xxr_para_tmp;
927 uint8_t **pbuffer_tmp;
928 struct scan_field field;
929 /* for STATE */
930 tap_state_t *path = NULL, state;
931 /* flag padding commands skipped due to -tap command */
932 int padding_command_skipped = 0;
934 if (ERROR_OK != svf_parse_cmd_string(cmd_str, strlen(cmd_str), argus, &num_of_argu))
935 return ERROR_FAIL;
937 /* NOTE: we're a bit loose here, because we ignore case in
938 * TAP state names (instead of insisting on uppercase).
941 command = svf_find_string_in_array(argus[0],
942 (char **)svf_command_name, ARRAY_SIZE(svf_command_name));
943 switch (command) {
944 case ENDDR:
945 case ENDIR:
946 if (num_of_argu != 2) {
947 LOG_ERROR("invalid parameter of %s", argus[0]);
948 return ERROR_FAIL;
951 i_tmp = tap_state_by_name(argus[1]);
953 if (svf_tap_state_is_stable(i_tmp)) {
954 if (command == ENDIR) {
955 svf_para.ir_end_state = i_tmp;
956 LOG_DEBUG("\tIR end_state = %s",
957 tap_state_name(i_tmp));
958 } else {
959 svf_para.dr_end_state = i_tmp;
960 LOG_DEBUG("\tDR end_state = %s",
961 tap_state_name(i_tmp));
963 } else {
964 LOG_ERROR("%s: %s is not a stable state",
965 argus[0], argus[1]);
966 return ERROR_FAIL;
968 break;
969 case FREQUENCY:
970 if ((num_of_argu != 1) && (num_of_argu != 3)) {
971 LOG_ERROR("invalid parameter of %s", argus[0]);
972 return ERROR_FAIL;
974 if (1 == num_of_argu) {
975 /* TODO: set jtag speed to full speed */
976 svf_para.frequency = 0;
977 } else {
978 if (strcmp(argus[2], "HZ")) {
979 LOG_ERROR("HZ not found in FREQUENCY command");
980 return ERROR_FAIL;
982 if (ERROR_OK != svf_execute_tap())
983 return ERROR_FAIL;
984 svf_para.frequency = atof(argus[1]);
985 /* TODO: set jtag speed to */
986 if (svf_para.frequency > 0) {
987 command_run_linef(cmd_ctx,
988 "adapter_khz %d",
989 (int)svf_para.frequency / 1000);
990 LOG_DEBUG("\tfrequency = %f", svf_para.frequency);
993 break;
994 case HDR:
995 if (svf_tap_is_specified) {
996 padding_command_skipped = 1;
997 break;
999 xxr_para_tmp = &svf_para.hdr_para;
1000 goto XXR_common;
1001 case HIR:
1002 if (svf_tap_is_specified) {
1003 padding_command_skipped = 1;
1004 break;
1006 xxr_para_tmp = &svf_para.hir_para;
1007 goto XXR_common;
1008 case TDR:
1009 if (svf_tap_is_specified) {
1010 padding_command_skipped = 1;
1011 break;
1013 xxr_para_tmp = &svf_para.tdr_para;
1014 goto XXR_common;
1015 case TIR:
1016 if (svf_tap_is_specified) {
1017 padding_command_skipped = 1;
1018 break;
1020 xxr_para_tmp = &svf_para.tir_para;
1021 goto XXR_common;
1022 case SDR:
1023 xxr_para_tmp = &svf_para.sdr_para;
1024 goto XXR_common;
1025 case SIR:
1026 xxr_para_tmp = &svf_para.sir_para;
1027 goto XXR_common;
1028 XXR_common:
1029 /* XXR length [TDI (tdi)] [TDO (tdo)][MASK (mask)] [SMASK (smask)] */
1030 if ((num_of_argu > 10) || (num_of_argu % 2)) {
1031 LOG_ERROR("invalid parameter of %s", argus[0]);
1032 return ERROR_FAIL;
1034 i_tmp = xxr_para_tmp->len;
1035 xxr_para_tmp->len = atoi(argus[1]);
1036 /* If we are to enlarge the buffers, all parts of xxr_para_tmp
1037 * need to be freed */
1038 if (i_tmp < xxr_para_tmp->len) {
1039 free(xxr_para_tmp->tdi);
1040 xxr_para_tmp->tdi = NULL;
1041 free(xxr_para_tmp->tdo);
1042 xxr_para_tmp->tdo = NULL;
1043 free(xxr_para_tmp->mask);
1044 xxr_para_tmp->mask = NULL;
1045 free(xxr_para_tmp->smask);
1046 xxr_para_tmp->smask = NULL;
1049 LOG_DEBUG("\tlength = %d", xxr_para_tmp->len);
1050 xxr_para_tmp->data_mask = 0;
1051 for (i = 2; i < num_of_argu; i += 2) {
1052 if ((strlen(argus[i + 1]) < 3) || (argus[i + 1][0] != '(') ||
1053 (argus[i + 1][strlen(argus[i + 1]) - 1] != ')')) {
1054 LOG_ERROR("data section error");
1055 return ERROR_FAIL;
1057 argus[i + 1][strlen(argus[i + 1]) - 1] = '\0';
1058 /* TDI, TDO, MASK, SMASK */
1059 if (!strcmp(argus[i], "TDI")) {
1060 /* TDI */
1061 pbuffer_tmp = &xxr_para_tmp->tdi;
1062 xxr_para_tmp->data_mask |= XXR_TDI;
1063 } else if (!strcmp(argus[i], "TDO")) {
1064 /* TDO */
1065 pbuffer_tmp = &xxr_para_tmp->tdo;
1066 xxr_para_tmp->data_mask |= XXR_TDO;
1067 } else if (!strcmp(argus[i], "MASK")) {
1068 /* MASK */
1069 pbuffer_tmp = &xxr_para_tmp->mask;
1070 xxr_para_tmp->data_mask |= XXR_MASK;
1071 } else if (!strcmp(argus[i], "SMASK")) {
1072 /* SMASK */
1073 pbuffer_tmp = &xxr_para_tmp->smask;
1074 xxr_para_tmp->data_mask |= XXR_SMASK;
1075 } else {
1076 LOG_ERROR("unknow parameter: %s", argus[i]);
1077 return ERROR_FAIL;
1079 if (ERROR_OK !=
1080 svf_copy_hexstring_to_binary(&argus[i + 1][1], pbuffer_tmp, i_tmp,
1081 xxr_para_tmp->len)) {
1082 LOG_ERROR("fail to parse hex value");
1083 return ERROR_FAIL;
1085 SVF_BUF_LOG(DEBUG, *pbuffer_tmp, xxr_para_tmp->len, argus[i]);
1087 /* If a command changes the length of the last scan of the same type and the
1088 * MASK parameter is absent, */
1089 /* the mask pattern used is all cares */
1090 if (!(xxr_para_tmp->data_mask & XXR_MASK) && (i_tmp != xxr_para_tmp->len)) {
1091 /* MASK not defined and length changed */
1092 if (ERROR_OK !=
1093 svf_adjust_array_length(&xxr_para_tmp->mask, i_tmp,
1094 xxr_para_tmp->len)) {
1095 LOG_ERROR("fail to adjust length of array");
1096 return ERROR_FAIL;
1098 buf_set_ones(xxr_para_tmp->mask, xxr_para_tmp->len);
1100 /* If TDO is absent, no comparison is needed, set the mask to 0 */
1101 if (!(xxr_para_tmp->data_mask & XXR_TDO)) {
1102 if (NULL == xxr_para_tmp->tdo) {
1103 if (ERROR_OK !=
1104 svf_adjust_array_length(&xxr_para_tmp->tdo, i_tmp,
1105 xxr_para_tmp->len)) {
1106 LOG_ERROR("fail to adjust length of array");
1107 return ERROR_FAIL;
1110 if (NULL == xxr_para_tmp->mask) {
1111 if (ERROR_OK !=
1112 svf_adjust_array_length(&xxr_para_tmp->mask, i_tmp,
1113 xxr_para_tmp->len)) {
1114 LOG_ERROR("fail to adjust length of array");
1115 return ERROR_FAIL;
1118 memset(xxr_para_tmp->mask, 0, (xxr_para_tmp->len + 7) >> 3);
1120 /* do scan if necessary */
1121 if (SDR == command) {
1122 /* check buffer size first, reallocate if necessary */
1123 i = svf_para.hdr_para.len + svf_para.sdr_para.len +
1124 svf_para.tdr_para.len;
1125 if ((svf_buffer_size - svf_buffer_index) < ((i + 7) >> 3)) {
1126 /* reallocate buffer */
1127 if (svf_realloc_buffers(svf_buffer_index + ((i + 7) >> 3)) != ERROR_OK) {
1128 LOG_ERROR("not enough memory");
1129 return ERROR_FAIL;
1133 /* assemble dr data */
1134 i = 0;
1135 buf_set_buf(svf_para.hdr_para.tdi,
1137 &svf_tdi_buffer[svf_buffer_index],
1139 svf_para.hdr_para.len);
1140 i += svf_para.hdr_para.len;
1141 buf_set_buf(svf_para.sdr_para.tdi,
1143 &svf_tdi_buffer[svf_buffer_index],
1145 svf_para.sdr_para.len);
1146 i += svf_para.sdr_para.len;
1147 buf_set_buf(svf_para.tdr_para.tdi,
1149 &svf_tdi_buffer[svf_buffer_index],
1151 svf_para.tdr_para.len);
1152 i += svf_para.tdr_para.len;
1154 /* add check data */
1155 if (svf_para.sdr_para.data_mask & XXR_TDO) {
1156 /* assemble dr mask data */
1157 i = 0;
1158 buf_set_buf(svf_para.hdr_para.mask,
1160 &svf_mask_buffer[svf_buffer_index],
1162 svf_para.hdr_para.len);
1163 i += svf_para.hdr_para.len;
1164 buf_set_buf(svf_para.sdr_para.mask,
1166 &svf_mask_buffer[svf_buffer_index],
1168 svf_para.sdr_para.len);
1169 i += svf_para.sdr_para.len;
1170 buf_set_buf(svf_para.tdr_para.mask,
1172 &svf_mask_buffer[svf_buffer_index],
1174 svf_para.tdr_para.len);
1176 /* assemble dr check data */
1177 i = 0;
1178 buf_set_buf(svf_para.hdr_para.tdo,
1180 &svf_tdo_buffer[svf_buffer_index],
1182 svf_para.hdr_para.len);
1183 i += svf_para.hdr_para.len;
1184 buf_set_buf(svf_para.sdr_para.tdo,
1186 &svf_tdo_buffer[svf_buffer_index],
1188 svf_para.sdr_para.len);
1189 i += svf_para.sdr_para.len;
1190 buf_set_buf(svf_para.tdr_para.tdo,
1192 &svf_tdo_buffer[svf_buffer_index],
1194 svf_para.tdr_para.len);
1195 i += svf_para.tdr_para.len;
1197 svf_add_check_para(1, svf_buffer_index, i);
1198 } else
1199 svf_add_check_para(0, svf_buffer_index, i);
1200 field.num_bits = i;
1201 field.out_value = &svf_tdi_buffer[svf_buffer_index];
1202 field.in_value = (xxr_para_tmp->data_mask & XXR_TDO) ? &svf_tdi_buffer[svf_buffer_index] : NULL;
1203 if (!svf_nil) {
1204 /* NOTE: doesn't use SVF-specified state paths */
1205 jtag_add_plain_dr_scan(field.num_bits,
1206 field.out_value,
1207 field.in_value,
1208 svf_para.dr_end_state);
1211 svf_buffer_index += (i + 7) >> 3;
1212 } else if (SIR == command) {
1213 /* check buffer size first, reallocate if necessary */
1214 i = svf_para.hir_para.len + svf_para.sir_para.len +
1215 svf_para.tir_para.len;
1216 if ((svf_buffer_size - svf_buffer_index) < ((i + 7) >> 3)) {
1217 if (svf_realloc_buffers(svf_buffer_index + ((i + 7) >> 3)) != ERROR_OK) {
1218 LOG_ERROR("not enough memory");
1219 return ERROR_FAIL;
1223 /* assemble ir data */
1224 i = 0;
1225 buf_set_buf(svf_para.hir_para.tdi,
1227 &svf_tdi_buffer[svf_buffer_index],
1229 svf_para.hir_para.len);
1230 i += svf_para.hir_para.len;
1231 buf_set_buf(svf_para.sir_para.tdi,
1233 &svf_tdi_buffer[svf_buffer_index],
1235 svf_para.sir_para.len);
1236 i += svf_para.sir_para.len;
1237 buf_set_buf(svf_para.tir_para.tdi,
1239 &svf_tdi_buffer[svf_buffer_index],
1241 svf_para.tir_para.len);
1242 i += svf_para.tir_para.len;
1244 /* add check data */
1245 if (svf_para.sir_para.data_mask & XXR_TDO) {
1246 /* assemble dr mask data */
1247 i = 0;
1248 buf_set_buf(svf_para.hir_para.mask,
1250 &svf_mask_buffer[svf_buffer_index],
1252 svf_para.hir_para.len);
1253 i += svf_para.hir_para.len;
1254 buf_set_buf(svf_para.sir_para.mask,
1256 &svf_mask_buffer[svf_buffer_index],
1258 svf_para.sir_para.len);
1259 i += svf_para.sir_para.len;
1260 buf_set_buf(svf_para.tir_para.mask,
1262 &svf_mask_buffer[svf_buffer_index],
1264 svf_para.tir_para.len);
1266 /* assemble dr check data */
1267 i = 0;
1268 buf_set_buf(svf_para.hir_para.tdo,
1270 &svf_tdo_buffer[svf_buffer_index],
1272 svf_para.hir_para.len);
1273 i += svf_para.hir_para.len;
1274 buf_set_buf(svf_para.sir_para.tdo,
1276 &svf_tdo_buffer[svf_buffer_index],
1278 svf_para.sir_para.len);
1279 i += svf_para.sir_para.len;
1280 buf_set_buf(svf_para.tir_para.tdo,
1282 &svf_tdo_buffer[svf_buffer_index],
1284 svf_para.tir_para.len);
1285 i += svf_para.tir_para.len;
1287 svf_add_check_para(1, svf_buffer_index, i);
1288 } else
1289 svf_add_check_para(0, svf_buffer_index, i);
1290 field.num_bits = i;
1291 field.out_value = &svf_tdi_buffer[svf_buffer_index];
1292 field.in_value = (xxr_para_tmp->data_mask & XXR_TDO) ? &svf_tdi_buffer[svf_buffer_index] : NULL;
1293 if (!svf_nil) {
1294 /* NOTE: doesn't use SVF-specified state paths */
1295 jtag_add_plain_ir_scan(field.num_bits,
1296 field.out_value,
1297 field.in_value,
1298 svf_para.ir_end_state);
1301 svf_buffer_index += (i + 7) >> 3;
1303 break;
1304 case PIO:
1305 case PIOMAP:
1306 LOG_ERROR("PIO and PIOMAP are not supported");
1307 return ERROR_FAIL;
1308 break;
1309 case RUNTEST:
1310 /* RUNTEST [run_state] run_count run_clk [min_time SEC [MAXIMUM max_time
1311 * SEC]] [ENDSTATE end_state] */
1312 /* RUNTEST [run_state] min_time SEC [MAXIMUM max_time SEC] [ENDSTATE
1313 * end_state] */
1314 if ((num_of_argu < 3) && (num_of_argu > 11)) {
1315 LOG_ERROR("invalid parameter of %s", argus[0]);
1316 return ERROR_FAIL;
1318 /* init */
1319 run_count = 0;
1320 min_time = 0;
1321 i = 1;
1323 /* run_state */
1324 i_tmp = tap_state_by_name(argus[i]);
1325 if (i_tmp != TAP_INVALID) {
1326 if (svf_tap_state_is_stable(i_tmp)) {
1327 svf_para.runtest_run_state = i_tmp;
1329 /* When a run_state is specified, the new
1330 * run_state becomes the default end_state.
1332 svf_para.runtest_end_state = i_tmp;
1333 LOG_DEBUG("\trun_state = %s", tap_state_name(i_tmp));
1334 i++;
1335 } else {
1336 LOG_ERROR("%s: %s is not a stable state", argus[0], tap_state_name(i_tmp));
1337 return ERROR_FAIL;
1341 /* run_count run_clk */
1342 if (((i + 2) <= num_of_argu) && strcmp(argus[i + 1], "SEC")) {
1343 if (!strcmp(argus[i + 1], "TCK")) {
1344 /* clock source is TCK */
1345 run_count = atoi(argus[i]);
1346 LOG_DEBUG("\trun_count@TCK = %d", run_count);
1347 } else {
1348 LOG_ERROR("%s not supported for clock", argus[i + 1]);
1349 return ERROR_FAIL;
1351 i += 2;
1353 /* min_time SEC */
1354 if (((i + 2) <= num_of_argu) && !strcmp(argus[i + 1], "SEC")) {
1355 min_time = atof(argus[i]);
1356 LOG_DEBUG("\tmin_time = %fs", min_time);
1357 i += 2;
1359 /* MAXIMUM max_time SEC */
1360 if (((i + 3) <= num_of_argu) &&
1361 !strcmp(argus[i], "MAXIMUM") && !strcmp(argus[i + 2], "SEC")) {
1362 float max_time = 0;
1363 max_time = atof(argus[i + 1]);
1364 LOG_DEBUG("\tmax_time = %fs", max_time);
1365 i += 3;
1367 /* ENDSTATE end_state */
1368 if (((i + 2) <= num_of_argu) && !strcmp(argus[i], "ENDSTATE")) {
1369 i_tmp = tap_state_by_name(argus[i + 1]);
1371 if (svf_tap_state_is_stable(i_tmp)) {
1372 svf_para.runtest_end_state = i_tmp;
1373 LOG_DEBUG("\tend_state = %s", tap_state_name(i_tmp));
1374 } else {
1375 LOG_ERROR("%s: %s is not a stable state", argus[0], tap_state_name(i_tmp));
1376 return ERROR_FAIL;
1378 i += 2;
1381 /* all parameter should be parsed */
1382 if (i == num_of_argu) {
1383 #if 1
1384 /* FIXME handle statemove failures */
1385 uint32_t min_usec = 1000000 * min_time;
1387 /* enter into run_state if necessary */
1388 if (cmd_queue_cur_state != svf_para.runtest_run_state)
1389 svf_add_statemove(svf_para.runtest_run_state);
1391 /* add clocks and/or min wait */
1392 if (run_count > 0) {
1393 if (!svf_nil)
1394 jtag_add_clocks(run_count);
1397 if (min_usec > 0) {
1398 if (!svf_nil)
1399 jtag_add_sleep(min_usec);
1402 /* move to end_state if necessary */
1403 if (svf_para.runtest_end_state != svf_para.runtest_run_state)
1404 svf_add_statemove(svf_para.runtest_end_state);
1406 #else
1407 if (svf_para.runtest_run_state != TAP_IDLE) {
1408 LOG_ERROR("cannot runtest in %s state",
1409 tap_state_name(svf_para.runtest_run_state));
1410 return ERROR_FAIL;
1413 if (!svf_nil)
1414 jtag_add_runtest(run_count, svf_para.runtest_end_state);
1415 #endif
1416 } else {
1417 LOG_ERROR("fail to parse parameter of RUNTEST, %d out of %d is parsed",
1419 num_of_argu);
1420 return ERROR_FAIL;
1422 break;
1423 case STATE:
1424 /* STATE [pathstate1 [pathstate2 ...[pathstaten]]] stable_state */
1425 if (num_of_argu < 2) {
1426 LOG_ERROR("invalid parameter of %s", argus[0]);
1427 return ERROR_FAIL;
1429 if (num_of_argu > 2) {
1430 /* STATE pathstate1 ... stable_state */
1431 path = malloc((num_of_argu - 1) * sizeof(tap_state_t));
1432 if (NULL == path) {
1433 LOG_ERROR("not enough memory");
1434 return ERROR_FAIL;
1436 num_of_argu--; /* num of path */
1437 i_tmp = 1; /* path is from parameter 1 */
1438 for (i = 0; i < num_of_argu; i++, i_tmp++) {
1439 path[i] = tap_state_by_name(argus[i_tmp]);
1440 if (path[i] == TAP_INVALID) {
1441 LOG_ERROR("%s: %s is not a valid state", argus[0], argus[i_tmp]);
1442 free(path);
1443 return ERROR_FAIL;
1445 /* OpenOCD refuses paths containing TAP_RESET */
1446 if (TAP_RESET == path[i]) {
1447 /* FIXME last state MUST be stable! */
1448 if (i > 0) {
1449 if (!svf_nil)
1450 jtag_add_pathmove(i, path);
1452 if (!svf_nil)
1453 jtag_add_tlr();
1454 num_of_argu -= i + 1;
1455 i = -1;
1458 if (num_of_argu > 0) {
1459 /* execute last path if necessary */
1460 if (svf_tap_state_is_stable(path[num_of_argu - 1])) {
1461 /* last state MUST be stable state */
1462 if (!svf_nil)
1463 jtag_add_pathmove(num_of_argu, path);
1464 LOG_DEBUG("\tmove to %s by path_move",
1465 tap_state_name(path[num_of_argu - 1]));
1466 } else {
1467 LOG_ERROR("%s: %s is not a stable state",
1468 argus[0],
1469 tap_state_name(path[num_of_argu - 1]));
1470 free(path);
1471 return ERROR_FAIL;
1475 free(path);
1476 path = NULL;
1477 } else {
1478 /* STATE stable_state */
1479 state = tap_state_by_name(argus[1]);
1480 if (svf_tap_state_is_stable(state)) {
1481 LOG_DEBUG("\tmove to %s by svf_add_statemove",
1482 tap_state_name(state));
1483 /* FIXME handle statemove failures */
1484 svf_add_statemove(state);
1485 } else {
1486 LOG_ERROR("%s: %s is not a stable state",
1487 argus[0], tap_state_name(state));
1488 return ERROR_FAIL;
1491 break;
1492 case TRST:
1493 /* TRST trst_mode */
1494 if (num_of_argu != 2) {
1495 LOG_ERROR("invalid parameter of %s", argus[0]);
1496 return ERROR_FAIL;
1498 if (svf_para.trst_mode != TRST_ABSENT) {
1499 if (ERROR_OK != svf_execute_tap())
1500 return ERROR_FAIL;
1501 i_tmp = svf_find_string_in_array(argus[1],
1502 (char **)svf_trst_mode_name,
1503 ARRAY_SIZE(svf_trst_mode_name));
1504 switch (i_tmp) {
1505 case TRST_ON:
1506 if (!svf_nil)
1507 jtag_add_reset(1, 0);
1508 break;
1509 case TRST_Z:
1510 case TRST_OFF:
1511 if (!svf_nil)
1512 jtag_add_reset(0, 0);
1513 break;
1514 case TRST_ABSENT:
1515 break;
1516 default:
1517 LOG_ERROR("unknown TRST mode: %s", argus[1]);
1518 return ERROR_FAIL;
1520 svf_para.trst_mode = i_tmp;
1521 LOG_DEBUG("\ttrst_mode = %s", svf_trst_mode_name[svf_para.trst_mode]);
1522 } else {
1523 LOG_ERROR("can not accpet TRST command if trst_mode is ABSENT");
1524 return ERROR_FAIL;
1526 break;
1527 default:
1528 LOG_ERROR("invalid svf command: %s", argus[0]);
1529 return ERROR_FAIL;
1530 break;
1533 if (!svf_quiet) {
1534 if (padding_command_skipped)
1535 LOG_USER("(Above Padding command skipped, as per -tap argument)");
1538 if (debug_level >= LOG_LVL_DEBUG) {
1539 /* for convenient debugging, execute tap if possible */
1540 if ((svf_buffer_index > 0) && \
1541 (((command != STATE) && (command != RUNTEST)) || \
1542 ((command == STATE) && (num_of_argu == 2)))) {
1543 if (ERROR_OK != svf_execute_tap())
1544 return ERROR_FAIL;
1546 /* output debug info */
1547 if ((SIR == command) || (SDR == command)) {
1548 SVF_BUF_LOG(DEBUG, svf_tdi_buffer, svf_check_tdo_para[0].bit_len, "TDO read");
1551 } else {
1552 /* for fast executing, execute tap if necessary */
1553 /* half of the buffer is for the next command */
1554 if (((svf_buffer_index >= SVF_MAX_BUFFER_SIZE_TO_COMMIT) ||
1555 (svf_check_tdo_para_index >= SVF_CHECK_TDO_PARA_SIZE / 2)) && \
1556 (((command != STATE) && (command != RUNTEST)) || \
1557 ((command == STATE) && (num_of_argu == 2))))
1558 return svf_execute_tap();
1561 return ERROR_OK;
1564 static const struct command_registration svf_command_handlers[] = {
1566 .name = "svf",
1567 .handler = handle_svf_command,
1568 .mode = COMMAND_EXEC,
1569 .help = "Runs a SVF file.",
1570 .usage = "svf [-tap device.tap] <file> [quiet] [nil] [progress] [ignore_error]",
1572 COMMAND_REGISTRATION_DONE
1575 int svf_register_commands(struct command_context *cmd_ctx)
1577 return register_commands(cmd_ctx, NULL, svf_command_handlers);