?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Remove FSF address from GPL notices
[openocd.git] / src / flash / nor / mrvlqspi.c
blobd79917058c666af610a49db7ebfd79f3e2f73ace
1 /***************************************************************************
2 * Copyright (C) 2014 by Mahavir Jain <mjain@marvell.com> *
3 * *
4 * This program is free software; you can redistribute it and/or modify *
5 * it under the terms of the GNU General Public License as published by *
6 * the Free Software Foundation; either version 2 of the License, or *
7 * (at your option) any later version. *
8 * *
9 * This program is distributed in the hope that it will be useful, *
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
12 * GNU General Public License for more details. *
13 * *
14 * You should have received a copy of the GNU General Public License *
15 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
16 ***************************************************************************/
17
18 /*
19 * This is QSPI flash controller driver for Marvell's Wireless
20 * Microcontroller platform.
21 *
22 * For more information please refer,
23 * https://origin-www.marvell.com/microcontrollers/wi-fi-microcontroller-platform/
24 */
25
26 #ifdef HAVE_CONFIG_H
27 #include "config.h"
28 #endif
29
30 #include "imp.h"
31 #include "spi.h"
32 #include <helper/binarybuffer.h>
33 #include <target/algorithm.h>
34 #include <target/armv7m.h>
35
36 #define QSPI_R_EN (0x0)
37 #define QSPI_W_EN (0x1)
38 #define QSPI_SS_DISABLE (0x0)
39 #define QSPI_SS_ENABLE (0x1)
40 #define WRITE_DISBALE (0x0)
41 #define WRITE_ENABLE (0x1)
42
43 #define QSPI_TIMEOUT (1000)
44 #define FIFO_FLUSH_TIMEOUT (1000)
45 #define BLOCK_ERASE_TIMEOUT (1000)
46 #define CHIP_ERASE_TIMEOUT (10000)
47
48 #define SS_EN (1 << 0)
49 #define XFER_RDY (1 << 1)
50 #define RFIFO_EMPTY (1 << 4)
51 #define WFIFO_EMPTY (1 << 6)
52 #define WFIFO_FULL (1 << 7)
53 #define FIFO_FLUSH (1 << 9)
54 #define RW_EN (1 << 13)
55 #define XFER_STOP (1 << 14)
56 #define XFER_START (1 << 15)
57 #define CONF_MASK (0x7)
58 #define CONF_OFFSET (10)
59
60 #define INS_WRITE_ENABLE 0x06
61 #define INS_WRITE_DISABLE 0x04
62 #define INS_READ_STATUS 0x05
63 #define INS_PAGE_PROGRAM 0x02
64
65 #define CNTL 0x0 /* QSPI_BASE + 0x0 */
66 #define CONF 0x4
67 #define DOUT 0x8
68 #define DIN 0xc
69 #define INSTR 0x10
70 #define ADDR 0x14
71 #define RDMODE 0x18
72 #define HDRCNT 0x1c
73 #define DINCNT 0x20
74
75 struct mrvlqspi_flash_bank {
76 int probed;
77 uint32_t reg_base;
78 uint32_t bank_num;
79 const struct flash_device *dev;
80 };
81
82 static inline uint32_t mrvlqspi_get_reg(struct flash_bank *bank, uint32_t reg)
83 {
84 struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
85 return reg + mrvlqspi_info->reg_base;
86 }
87
88 static inline int mrvlqspi_set_din_cnt(struct flash_bank *bank, uint32_t count)
89 {
90 struct target *target = bank->target;
91
92 return target_write_u32(target, mrvlqspi_get_reg(bank, DINCNT), count);
93 }
94
95 static inline int mrvlqspi_set_addr(struct flash_bank *bank, uint32_t addr)
96 {
97 struct target *target = bank->target;
98
99 return target_write_u32(target, mrvlqspi_get_reg(bank, ADDR), addr);
100 }
101
102 static inline int mrvlqspi_set_instr(struct flash_bank *bank, uint32_t instr)
103 {
104 struct target *target = bank->target;
105
106 return target_write_u32(target, mrvlqspi_get_reg(bank, INSTR), instr);
107 }
108
109 static inline int mrvlqspi_set_hdr_cnt(struct flash_bank *bank, uint32_t hdr_cnt)
110 {
111 struct target *target = bank->target;
112
113 return target_write_u32(target, mrvlqspi_get_reg(bank, HDRCNT), hdr_cnt);
114 }
115
116 static int mrvlqspi_set_conf(struct flash_bank *bank, uint32_t conf_val)
117 {
118 int retval;
119 uint32_t regval;
120 struct target *target = bank->target;
121
122 retval = target_read_u32(target,
123 mrvlqspi_get_reg(bank, CONF), &regval);
124 if (retval != ERROR_OK)
125 return retval;
126
127 regval &= ~(CONF_MASK << CONF_OFFSET);
128 regval |= (conf_val << CONF_OFFSET);
129
130 return target_write_u32(target,
131 mrvlqspi_get_reg(bank, CONF), regval);
132 }
133
134 static int mrvlqspi_set_ss_state(struct flash_bank *bank, bool state, int timeout)
135 {
136 int retval;
137 uint32_t regval;
138 struct target *target = bank->target;
139
140 retval = target_read_u32(target,
141 mrvlqspi_get_reg(bank, CNTL), &regval);
142 if (retval != ERROR_OK)
143 return retval;
144
145 if (state)
146 regval |= SS_EN;
147 else
148 regval &= ~(SS_EN);
149
150 retval = target_write_u32(target,
151 mrvlqspi_get_reg(bank, CNTL), regval);
152 if (retval != ERROR_OK)
153 return retval;
154
155 /* wait for xfer_ready to set */
156 for (;;) {
157 retval = target_read_u32(target,
158 mrvlqspi_get_reg(bank, CNTL), &regval);
159 if (retval != ERROR_OK)
160 return retval;
161 LOG_DEBUG("status: 0x%08" PRIx32, regval);
162 if ((regval & XFER_RDY) == XFER_RDY)
163 break;
164 if (timeout-- <= 0) {
165 LOG_ERROR("timed out waiting for flash");
166 return ERROR_FAIL;
167 }
168 alive_sleep(1);
169 }
170 return ERROR_OK;
171 }
172
173 static int mrvlqspi_start_transfer(struct flash_bank *bank, bool rw_mode)
174 {
175 int retval;
176 uint32_t regval;
177 struct target *target = bank->target;
178
179 retval = mrvlqspi_set_ss_state(bank, QSPI_SS_ENABLE, QSPI_TIMEOUT);
180 if (retval != ERROR_OK)
181 return retval;
182
183 retval = target_read_u32(target,
184 mrvlqspi_get_reg(bank, CONF), &regval);
185 if (retval != ERROR_OK)
186 return retval;
187
188 if (rw_mode)
189 regval |= RW_EN;
190 else
191 regval &= ~(RW_EN);
192
193 regval |= XFER_START;
194
195 retval = target_write_u32(target,
196 mrvlqspi_get_reg(bank, CONF), regval);
197 if (retval != ERROR_OK)
198 return retval;
199
200 return ERROR_OK;
201 }
202
203 static int mrvlqspi_stop_transfer(struct flash_bank *bank)
204 {
205 int retval;
206 uint32_t regval;
207 struct target *target = bank->target;
208 int timeout = QSPI_TIMEOUT;
209
210 /* wait for xfer_ready and wfifo_empty to set */
211 for (;;) {
212 retval = target_read_u32(target,
213 mrvlqspi_get_reg(bank, CNTL), &regval);
214 if (retval != ERROR_OK)
215 return retval;
216 LOG_DEBUG("status: 0x%08" PRIx32, regval);
217 if ((regval & (XFER_RDY | WFIFO_EMPTY)) ==
218 (XFER_RDY | WFIFO_EMPTY))
219 break;
220 if (timeout-- <= 0) {
221 LOG_ERROR("timed out waiting for flash");
222 return ERROR_FAIL;
223 }
224 alive_sleep(1);
225 }
226
227 retval = target_read_u32(target,
228 mrvlqspi_get_reg(bank, CONF), &regval);
229 if (retval != ERROR_OK)
230 return retval;
231
232 regval |= XFER_STOP;
233
234 retval = target_write_u32(target,
235 mrvlqspi_get_reg(bank, CONF), regval);
236 if (retval != ERROR_OK)
237 return retval;
238
239 /* wait for xfer_start to reset */
240 for (;;) {
241 retval = target_read_u32(target,
242 mrvlqspi_get_reg(bank, CONF), &regval);
243 if (retval != ERROR_OK)
244 return retval;
245 LOG_DEBUG("status: 0x%08" PRIx32, regval);
246 if ((regval & XFER_START) == 0)
247 break;
248 if (timeout-- <= 0) {
249 LOG_ERROR("timed out waiting for flash");
250 return ERROR_FAIL;
251 }
252 alive_sleep(1);
253 }
254
255 retval = mrvlqspi_set_ss_state(bank, QSPI_SS_DISABLE, QSPI_TIMEOUT);
256 if (retval != ERROR_OK)
257 return retval;
258
259 return ERROR_OK;
260 }
261
262 static int mrvlqspi_fifo_flush(struct flash_bank *bank, int timeout)
263 {
264 int retval;
265 uint32_t val;
266 struct target *target = bank->target;
267
268 retval = target_read_u32(target,
269 mrvlqspi_get_reg(bank, CONF), &val);
270 if (retval != ERROR_OK)
271 return retval;
272
273 val |= FIFO_FLUSH;
274
275 retval = target_write_u32(target,
276 mrvlqspi_get_reg(bank, CONF), val);
277 if (retval != ERROR_OK)
278 return retval;
279
280 /* wait for fifo_flush to clear */
281 for (;;) {
282 retval = target_read_u32(target,
283 mrvlqspi_get_reg(bank, CONF), &val);
284 if (retval != ERROR_OK)
285 return retval;
286 LOG_DEBUG("status: 0x%08" PRIX32, val);
287 if ((val & FIFO_FLUSH) == 0)
288 break;
289 if (timeout-- <= 0) {
290 LOG_ERROR("timed out waiting for flash");
291 return ERROR_FAIL;
292 }
293 alive_sleep(1);
294 }
295 return ERROR_OK;
296 }
297
298 static int mrvlqspi_read_byte(struct flash_bank *bank, uint8_t *data)
299 {
300 int retval;
301 uint32_t val;
302 struct target *target = bank->target;
303
304 /* wait for rfifo_empty to reset */
305 for (;;) {
306 retval = target_read_u32(target,
307 mrvlqspi_get_reg(bank, CNTL), &val);
308 if (retval != ERROR_OK)
309 return retval;
310 LOG_DEBUG("status: 0x%08" PRIx32, val);
311 if ((val & RFIFO_EMPTY) == 0)
312 break;
313 usleep(10);
314 }
315
316 retval = target_read_u32(target,
317 mrvlqspi_get_reg(bank, DIN), &val);
318 if (retval != ERROR_OK)
319 return retval;
320
321 *data = val & 0xFF;
322
323 return ERROR_OK;
324 }
325
326 static int mrvlqspi_flash_busy_status(struct flash_bank *bank, int timeout)
327 {
328 uint8_t val;
329 int retval;
330
331 /* Flush read/write fifo's */
332 retval = mrvlqspi_fifo_flush(bank, FIFO_FLUSH_TIMEOUT);
333 if (retval != ERROR_OK)
334 return retval;
335
336 /* Set instruction/addr count value */
337 retval = mrvlqspi_set_hdr_cnt(bank, 0x1);
338 if (retval != ERROR_OK)
339 return retval;
340
341 /* Read flash status register in continuous manner */
342 retval = mrvlqspi_set_din_cnt(bank, 0x0);
343 if (retval != ERROR_OK)
344 return retval;
345
346 /* Set instruction */
347 retval = mrvlqspi_set_instr(bank, INS_READ_STATUS);
348 if (retval != ERROR_OK)
349 return retval;
350
351 /* Set data and addr pin length */
352 retval = mrvlqspi_set_conf(bank, 0x0);
353 if (retval != ERROR_OK)
354 return retval;
355
356 /* Enable read mode transfer */
357 retval = mrvlqspi_start_transfer(bank, QSPI_R_EN);
358 if (retval != ERROR_OK)
359 return retval;
360
361 for (;;) {
362 retval = mrvlqspi_read_byte(bank, &val);
363 if (retval != ERROR_OK)
364 return retval;
365 if (!(val & 0x1))
366 break;
367 if (timeout-- <= 0) {
368 LOG_ERROR("timed out waiting for flash");
369 return ERROR_FAIL;
370 }
371 alive_sleep(1);
372 }
373
374 return mrvlqspi_stop_transfer(bank);
375 }
376
377 static int mrvlqspi_set_write_status(struct flash_bank *bank, bool mode)
378 {
379 int retval;
380 uint32_t instr;
381
382 /* Flush read/write fifo's */
383 retval = mrvlqspi_fifo_flush(bank, FIFO_FLUSH_TIMEOUT);
384 if (retval != ERROR_OK)
385 return retval;
386
387 /* Set instruction/addr count value */
388 retval = mrvlqspi_set_hdr_cnt(bank, 0x1);
389 if (retval != ERROR_OK)
390 return retval;
391
392 if (mode)
393 instr = INS_WRITE_ENABLE;
394 else
395 instr = INS_WRITE_DISABLE;
396
397 /* Set instruction */
398 retval = mrvlqspi_set_instr(bank, instr);
399 if (retval != ERROR_OK)
400 return retval;
401
402 retval = mrvlqspi_start_transfer(bank, QSPI_W_EN);
403 if (retval != ERROR_OK)
404 return retval;
405
406 retval = mrvlqspi_stop_transfer(bank);
407 if (retval != ERROR_OK)
408 return retval;
409
410 return retval;
411 }
412
413 static int mrvlqspi_read_id(struct flash_bank *bank, uint32_t *id)
414 {
415 uint8_t id_buf[3] = {0, 0, 0};
416 int retval, i;
417
418 LOG_DEBUG("Getting ID");
419
420 /* Flush read/write fifo's */
421 retval = mrvlqspi_fifo_flush(bank, FIFO_FLUSH_TIMEOUT);
422 if (retval != ERROR_OK)
423 return retval;
424
425 /* Set instruction/addr count value */
426 retval = mrvlqspi_set_hdr_cnt(bank, 0x1);
427 if (retval != ERROR_OK)
428 return retval;
429
430 /* Set count for number of bytes to read */
431 retval = mrvlqspi_set_din_cnt(bank, 0x3);
432 if (retval != ERROR_OK)
433 return retval;
434
435 /* Set instruction */
436 retval = mrvlqspi_set_instr(bank, SPIFLASH_READ_ID);
437 if (retval != ERROR_OK)
438 return retval;
439
440 /* Set data and addr pin length */
441 retval = mrvlqspi_set_conf(bank, 0x0);
442 if (retval != ERROR_OK)
443 return retval;
444
445 retval = mrvlqspi_start_transfer(bank, QSPI_R_EN);
446 if (retval != ERROR_OK)
447 return retval;
448
449 for (i = 0; i < 3; i++) {
450 retval = mrvlqspi_read_byte(bank, &id_buf[i]);
451 if (retval != ERROR_OK)
452 return retval;
453 }
454
455 LOG_DEBUG("ID is 0x%02" PRIx8 " 0x%02" PRIx8 " 0x%02" PRIx8,
456 id_buf[0], id_buf[1], id_buf[2]);
457 retval = mrvlqspi_set_ss_state(bank, QSPI_SS_DISABLE, QSPI_TIMEOUT);
458 if (retval != ERROR_OK)
459 return retval;
460
461 *id = id_buf[2] << 16 | id_buf[1] << 8 | id_buf[0];
462 return ERROR_OK;
463 }
464
465 static int mrvlqspi_block_erase(struct flash_bank *bank, uint32_t offset)
466 {
467 int retval;
468 struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
469
470 /* Set flash write enable */
471 retval = mrvlqspi_set_write_status(bank, WRITE_ENABLE);
472 if (retval != ERROR_OK)
473 return retval;
474
475 /* Set instruction/addr count value */
476 retval = mrvlqspi_set_hdr_cnt(bank, (0x1 | (0x3 << 4)));
477 if (retval != ERROR_OK)
478 return retval;
479
480 /* Set read offset address */
481 retval = mrvlqspi_set_addr(bank, offset);
482 if (retval != ERROR_OK)
483 return retval;
484
485 /* Set instruction */
486 retval = mrvlqspi_set_instr(bank, mrvlqspi_info->dev->erase_cmd);
487 if (retval != ERROR_OK)
488 return retval;
489
490 retval = mrvlqspi_start_transfer(bank, QSPI_W_EN);
491 if (retval != ERROR_OK)
492 return retval;
493
494 retval = mrvlqspi_stop_transfer(bank);
495 if (retval != ERROR_OK)
496 return retval;
497
498 return mrvlqspi_flash_busy_status(bank, BLOCK_ERASE_TIMEOUT);
499 }
500
501 static int mrvlqspi_bulk_erase(struct flash_bank *bank)
502 {
503 int retval;
504 struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
505
506 /* Set flash write enable */
507 retval = mrvlqspi_set_write_status(bank, WRITE_ENABLE);
508 if (retval != ERROR_OK)
509 return retval;
510
511 /* Set instruction */
512 retval = mrvlqspi_set_instr(bank, mrvlqspi_info->dev->chip_erase_cmd);
513 if (retval != ERROR_OK)
514 return retval;
515
516 retval = mrvlqspi_start_transfer(bank, QSPI_W_EN);
517 if (retval != ERROR_OK)
518 return retval;
519
520 retval = mrvlqspi_stop_transfer(bank);
521 if (retval != ERROR_OK)
522 return retval;
523
524 return mrvlqspi_flash_busy_status(bank, CHIP_ERASE_TIMEOUT);
525 }
526
527 static int mrvlqspi_flash_erase(struct flash_bank *bank, int first, int last)
528 {
529 struct target *target = bank->target;
530 struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
531 int retval = ERROR_OK;
532 int sector;
533
534 LOG_DEBUG("erase from sector %d to sector %d", first, last);
535
536 if (target->state != TARGET_HALTED) {
537 LOG_ERROR("Target not halted");
538 return ERROR_TARGET_NOT_HALTED;
539 }
540
541 if ((first < 0) || (last < first) || (last >= bank->num_sectors)) {
542 LOG_ERROR("Flash sector invalid");
543 return ERROR_FLASH_SECTOR_INVALID;
544 }
545
546 if (!(mrvlqspi_info->probed)) {
547 LOG_ERROR("Flash bank not probed");
548 return ERROR_FLASH_BANK_NOT_PROBED;
549 }
550
551 for (sector = first; sector <= last; sector++) {
552 if (bank->sectors[sector].is_protected) {
553 LOG_ERROR("Flash sector %d protected", sector);
554 return ERROR_FAIL;
555 }
556 }
557
558 /* If we're erasing the entire chip and the flash supports
559 * it, use a bulk erase instead of going sector-by-sector. */
560 if (first == 0 && last == (bank->num_sectors - 1)
561 && mrvlqspi_info->dev->chip_erase_cmd !=
562 mrvlqspi_info->dev->erase_cmd) {
563 LOG_DEBUG("Chip supports the bulk erase command."\
564 " Will use bulk erase instead of sector-by-sector erase.");
565 retval = mrvlqspi_bulk_erase(bank);
566 if (retval == ERROR_OK) {
567 return retval;
568 } else
569 LOG_WARNING("Bulk flash erase failed."
570 " Falling back to sector-by-sector erase.");
571 }
572
573 for (sector = first; sector <= last; sector++) {
574 retval = mrvlqspi_block_erase(bank,
575 sector * mrvlqspi_info->dev->sectorsize);
576 if (retval != ERROR_OK)
577 return retval;
578 }
579
580 return retval;
581 }
582
583 static int mrvlqspi_flash_write(struct flash_bank *bank, const uint8_t *buffer,
584 uint32_t offset, uint32_t count)
585 {
586 struct target *target = bank->target;
587 struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
588 int retval = ERROR_OK;
589 uint32_t page_size, fifo_size;
590 struct working_area *fifo;
591 struct reg_param reg_params[6];
592 struct armv7m_algorithm armv7m_info;
593 struct working_area *write_algorithm;
594 int sector;
595
596 LOG_DEBUG("offset=0x%08" PRIx32 " count=0x%08" PRIx32,
597 offset, count);
598
599 if (target->state != TARGET_HALTED) {
600 LOG_ERROR("Target not halted");
601 return ERROR_TARGET_NOT_HALTED;
602 }
603
604 if (offset + count > mrvlqspi_info->dev->size_in_bytes) {
605 LOG_WARNING("Writes past end of flash. Extra data discarded.");
606 count = mrvlqspi_info->dev->size_in_bytes - offset;
607 }
608
609 /* Check sector protection */
610 for (sector = 0; sector < bank->num_sectors; sector++) {
611 /* Start offset in or before this sector? */
612 /* End offset in or behind this sector? */
613 if ((offset <
614 (bank->sectors[sector].offset + bank->sectors[sector].size))
615 && ((offset + count - 1) >= bank->sectors[sector].offset)
616 && bank->sectors[sector].is_protected) {
617 LOG_ERROR("Flash sector %d protected", sector);
618 return ERROR_FAIL;
619 }
620 }
621
622 page_size = mrvlqspi_info->dev->pagesize;
623
624 /* See contrib/loaders/flash/mrvlqspi.S for src */
625 static const uint8_t mrvlqspi_flash_write_code[] = {
626 0x4f, 0xf0, 0x00, 0x0a, 0xa2, 0x44, 0x92, 0x45,
627 0x7f, 0xf6, 0xfc, 0xaf, 0x00, 0xf0, 0x6b, 0xf8,
628 0x5f, 0xf0, 0x01, 0x08, 0xc5, 0xf8, 0x1c, 0x80,
629 0x5f, 0xf0, 0x06, 0x08, 0xc5, 0xf8, 0x10, 0x80,
630 0x5f, 0xf0, 0x01, 0x09, 0x00, 0xf0, 0x6b, 0xf8,
631 0x00, 0xf0, 0x7d, 0xf8, 0x5f, 0xf0, 0x31, 0x08,
632 0xc5, 0xf8, 0x1c, 0x80, 0x90, 0x46, 0xc5, 0xf8,
633 0x14, 0x80, 0x5f, 0xf0, 0x02, 0x08, 0xc5, 0xf8,
634 0x10, 0x80, 0x5f, 0xf0, 0x01, 0x09, 0x00, 0xf0,
635 0x5a, 0xf8, 0xd0, 0xf8, 0x00, 0x80, 0xb8, 0xf1,
636 0x00, 0x0f, 0x00, 0xf0, 0x8b, 0x80, 0x47, 0x68,
637 0x47, 0x45, 0x3f, 0xf4, 0xf6, 0xaf, 0x17, 0xf8,
638 0x01, 0x9b, 0x00, 0xf0, 0x30, 0xf8, 0x8f, 0x42,
639 0x28, 0xbf, 0x00, 0xf1, 0x08, 0x07, 0x47, 0x60,
640 0x01, 0x3b, 0x00, 0x2b, 0x00, 0xf0, 0x05, 0x80,
641 0x02, 0xf1, 0x01, 0x02, 0x92, 0x45, 0x7f, 0xf4,
642 0xe4, 0xaf, 0x00, 0xf0, 0x50, 0xf8, 0xa2, 0x44,
643 0x00, 0xf0, 0x2d, 0xf8, 0x5f, 0xf0, 0x01, 0x08,
644 0xc5, 0xf8, 0x1c, 0x80, 0x5f, 0xf0, 0x00, 0x08,
645 0xc5, 0xf8, 0x20, 0x80, 0x5f, 0xf0, 0x05, 0x08,
646 0xc5, 0xf8, 0x10, 0x80, 0x5f, 0xf0, 0x00, 0x09,
647 0x00, 0xf0, 0x29, 0xf8, 0x00, 0xf0, 0x13, 0xf8,
648 0x09, 0xf0, 0x01, 0x09, 0xb9, 0xf1, 0x00, 0x0f,
649 0xf8, 0xd1, 0x00, 0xf0, 0x34, 0xf8, 0x00, 0x2b,
650 0xa4, 0xd1, 0x00, 0xf0, 0x53, 0xb8, 0xd5, 0xf8,
651 0x00, 0x80, 0x5f, 0xea, 0x08, 0x68, 0xfa, 0xd4,
652 0xc5, 0xf8, 0x08, 0x90, 0x70, 0x47, 0xd5, 0xf8,
653 0x00, 0x80, 0x5f, 0xea, 0xc8, 0x68, 0xfa, 0xd4,
654 0xd5, 0xf8, 0x0c, 0x90, 0x70, 0x47, 0xd5, 0xf8,
655 0x04, 0x80, 0x48, 0xf4, 0x00, 0x78, 0xc5, 0xf8,
656 0x04, 0x80, 0xd5, 0xf8, 0x04, 0x80, 0x5f, 0xea,
657 0x88, 0x58, 0xfa, 0xd4, 0x70, 0x47, 0xd5, 0xf8,
658 0x00, 0x80, 0x48, 0xf0, 0x01, 0x08, 0xc5, 0xf8,
659 0x00, 0x80, 0xd5, 0xf8, 0x00, 0x80, 0x5f, 0xea,
660 0x88, 0x78, 0xfa, 0xd5, 0xd5, 0xf8, 0x04, 0x80,
661 0x69, 0xf3, 0x4d, 0x38, 0x48, 0xf4, 0x00, 0x48,
662 0xc5, 0xf8, 0x04, 0x80, 0x70, 0x47, 0xd5, 0xf8,
663 0x00, 0x80, 0x5f, 0xea, 0x88, 0x78, 0xfa, 0xd5,
664 0xd5, 0xf8, 0x00, 0x80, 0x5f, 0xea, 0x48, 0x68,
665 0xfa, 0xd5, 0xd5, 0xf8, 0x04, 0x80, 0x48, 0xf4,
666 0x80, 0x48, 0xc5, 0xf8, 0x04, 0x80, 0xd5, 0xf8,
667 0x04, 0x80, 0x5f, 0xea, 0x08, 0x48, 0xfa, 0xd4,
668 0xd5, 0xf8, 0x00, 0x80, 0x28, 0xf0, 0x01, 0x08,
669 0xc5, 0xf8, 0x00, 0x80, 0xd5, 0xf8, 0x00, 0x80,
670 0x5f, 0xea, 0x88, 0x78, 0xfa, 0xd5, 0x70, 0x47,
671 0x00, 0x20, 0x50, 0x60, 0x30, 0x46, 0x00, 0xbe
672 };
673
674 if (target_alloc_working_area(target, sizeof(mrvlqspi_flash_write_code),
675 &write_algorithm) != ERROR_OK) {
676 LOG_ERROR("Insufficient working area. You must configure"\
677 " a working area > %zdB in order to write to SPIFI flash.",
678 sizeof(mrvlqspi_flash_write_code));
679 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
680 }
681
682 retval = target_write_buffer(target, write_algorithm->address,
683 sizeof(mrvlqspi_flash_write_code),
684 mrvlqspi_flash_write_code);
685 if (retval != ERROR_OK) {
686 target_free_working_area(target, write_algorithm);
687 return retval;
688 }
689
690 /* FIFO allocation */
691 fifo_size = target_get_working_area_avail(target);
692
693 if (fifo_size == 0) {
694 /* if we already allocated the writing code but failed to get fifo
695 * space, free the algorithm */
696 target_free_working_area(target, write_algorithm);
697
698 LOG_ERROR("Insufficient working area. Please allocate at least"\
699 " %zdB of working area to enable flash writes.",
700 sizeof(mrvlqspi_flash_write_code) + 1
701 );
702
703 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
704 } else if (fifo_size < page_size)
705 LOG_WARNING("Working area size is limited; flash writes may be"\
706 " slow. Increase working area size to at least %zdB"\
707 " to reduce write times.",
708 (size_t)(sizeof(mrvlqspi_flash_write_code) + page_size)
709 );
710
711 if (target_alloc_working_area(target, fifo_size, &fifo) != ERROR_OK) {
712 target_free_working_area(target, write_algorithm);
713 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
714 }
715
716 armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
717 armv7m_info.core_mode = ARM_MODE_THREAD;
718
719 init_reg_param(&reg_params[0], "r0", 32, PARAM_IN_OUT); /* buffer start, status (out) */
720 init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT); /* buffer end */
721 init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT); /* target address */
722 init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT); /* count (halfword-16bit) */
723 init_reg_param(&reg_params[4], "r4", 32, PARAM_OUT); /* page size */
724 init_reg_param(&reg_params[5], "r5", 32, PARAM_OUT); /* qspi base address */
725
726 buf_set_u32(reg_params[0].value, 0, 32, fifo->address);
727 buf_set_u32(reg_params[1].value, 0, 32, fifo->address + fifo->size);
728 buf_set_u32(reg_params[2].value, 0, 32, offset);
729 buf_set_u32(reg_params[3].value, 0, 32, count);
730 buf_set_u32(reg_params[4].value, 0, 32, page_size);
731 buf_set_u32(reg_params[5].value, 0, 32, (uint32_t) mrvlqspi_info->reg_base);
732
733 retval = target_run_flash_async_algorithm(target, buffer, count, 1,
734 0, NULL,
735 6, reg_params,
736 fifo->address, fifo->size,
737 write_algorithm->address, 0,
738 &armv7m_info
739 );
740
741 if (retval != ERROR_OK)
742 LOG_ERROR("Error executing flash write algorithm");
743
744 target_free_working_area(target, fifo);
745 target_free_working_area(target, write_algorithm);
746
747 destroy_reg_param(&reg_params[0]);
748 destroy_reg_param(&reg_params[1]);
749 destroy_reg_param(&reg_params[2]);
750 destroy_reg_param(&reg_params[3]);
751 destroy_reg_param(&reg_params[4]);
752 destroy_reg_param(&reg_params[5]);
753
754 return retval;
755 }
756
757 int mrvlqspi_flash_read(struct flash_bank *bank, uint8_t *buffer,
758 uint32_t offset, uint32_t count)
759 {
760 struct target *target = bank->target;
761 struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
762 int retval;
763 uint32_t i;
764
765 if (target->state != TARGET_HALTED) {
766 LOG_ERROR("Target not halted");
767 return ERROR_TARGET_NOT_HALTED;
768 }
769
770 if (!(mrvlqspi_info->probed)) {
771 LOG_ERROR("Flash bank not probed");
772 return ERROR_FLASH_BANK_NOT_PROBED;
773 }
774
775 /* Flush read/write fifo's */
776 retval = mrvlqspi_fifo_flush(bank, FIFO_FLUSH_TIMEOUT);
777 if (retval != ERROR_OK)
778 return retval;
779
780 /* Set instruction/addr count value */
781 retval = mrvlqspi_set_hdr_cnt(bank, (0x1 | (0x3 << 4)));
782 if (retval != ERROR_OK)
783 return retval;
784
785 /* Set count for number of bytes to read */
786 retval = mrvlqspi_set_din_cnt(bank, count);
787 if (retval != ERROR_OK)
788 return retval;
789
790 /* Set read address */
791 retval = mrvlqspi_set_addr(bank, offset);
792 if (retval != ERROR_OK)
793 return retval;
794
795 /* Set instruction */
796 retval = mrvlqspi_set_instr(bank, SPIFLASH_READ);
797 if (retval != ERROR_OK)
798 return retval;
799
800 /* Set data and addr pin length */
801 retval = mrvlqspi_set_conf(bank, 0x0);
802 if (retval != ERROR_OK)
803 return retval;
804
805 retval = mrvlqspi_start_transfer(bank, QSPI_R_EN);
806 if (retval != ERROR_OK)
807 return retval;
808
809 for (i = 0; i < count; i++) {
810 retval = mrvlqspi_read_byte(bank, &buffer[i]);
811 if (retval != ERROR_OK)
812 return retval;
813 }
814
815 retval = mrvlqspi_set_ss_state(bank, QSPI_SS_DISABLE, QSPI_TIMEOUT);
816 if (retval != ERROR_OK)
817 return retval;
818
819 return ERROR_OK;
820 }
821
822 static int mrvlqspi_probe(struct flash_bank *bank)
823 {
824 struct target *target = bank->target;
825 struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
826 uint32_t id = 0;
827 int retval;
828 struct flash_sector *sectors;
829
830 /* If we've already probed, we should be fine to skip this time. */
831 if (mrvlqspi_info->probed)
832 return ERROR_OK;
833
834 if (target->state != TARGET_HALTED) {
835 LOG_ERROR("Target not halted");
836 return ERROR_TARGET_NOT_HALTED;
837 }
838
839 mrvlqspi_info->probed = 0;
840 mrvlqspi_info->bank_num = bank->bank_number;
841
842 /* Read flash JEDEC ID */
843 retval = mrvlqspi_read_id(bank, &id);
844 if (retval != ERROR_OK)
845 return retval;
846
847 mrvlqspi_info->dev = NULL;
848 for (const struct flash_device *p = flash_devices; p->name ; p++)
849 if (p->device_id == id) {
850 mrvlqspi_info->dev = p;
851 break;
852 }
853
854 if (!mrvlqspi_info->dev) {
855 LOG_ERROR("Unknown flash device ID 0x%08" PRIx32, id);
856 return ERROR_FAIL;
857 }
858
859 LOG_INFO("Found flash device \'%s\' ID 0x%08" PRIx32,
860 mrvlqspi_info->dev->name, mrvlqspi_info->dev->device_id);
861
862 /* Set correct size value */
863 bank->size = mrvlqspi_info->dev->size_in_bytes;
864
865 /* create and fill sectors array */
866 bank->num_sectors = mrvlqspi_info->dev->size_in_bytes /
867 mrvlqspi_info->dev->sectorsize;
868 sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
869 if (sectors == NULL) {
870 LOG_ERROR("not enough memory");
871 return ERROR_FAIL;
872 }
873
874 for (int sector = 0; sector < bank->num_sectors; sector++) {
875 sectors[sector].offset =
876 sector * mrvlqspi_info->dev->sectorsize;
877 sectors[sector].size = mrvlqspi_info->dev->sectorsize;
878 sectors[sector].is_erased = -1;
879 sectors[sector].is_protected = 0;
880 }
881
882 bank->sectors = sectors;
883 mrvlqspi_info->probed = 1;
884
885 return ERROR_OK;
886 }
887
888 static int mrvlqspi_auto_probe(struct flash_bank *bank)
889 {
890 struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
891 if (mrvlqspi_info->probed)
892 return ERROR_OK;
893 return mrvlqspi_probe(bank);
894 }
895
896 static int mrvlqspi_flash_erase_check(struct flash_bank *bank)
897 {
898 /* Not implemented yet */
899 return ERROR_OK;
900 }
901
902 static int mrvlqspi_protect_check(struct flash_bank *bank)
903 {
904 /* Not implemented yet */
905 return ERROR_OK;
906 }
907
908 int mrvlqspi_get_info(struct flash_bank *bank, char *buf, int buf_size)
909 {
910 struct mrvlqspi_flash_bank *mrvlqspi_info = bank->driver_priv;
911
912 if (!(mrvlqspi_info->probed)) {
913 snprintf(buf, buf_size,
914 "\nQSPI flash bank not probed yet\n");
915 return ERROR_OK;
916 }
917
918 snprintf(buf, buf_size, "\nQSPI flash information:\n"
919 " Device \'%s\' ID 0x%08" PRIx32 "\n",
920 mrvlqspi_info->dev->name, mrvlqspi_info->dev->device_id);
921
922 return ERROR_OK;
923 }
924
925 FLASH_BANK_COMMAND_HANDLER(mrvlqspi_flash_bank_command)
926 {
927 struct mrvlqspi_flash_bank *mrvlqspi_info;
928
929 if (CMD_ARGC < 7)
930 return ERROR_COMMAND_SYNTAX_ERROR;
931
932 mrvlqspi_info = malloc(sizeof(struct mrvlqspi_flash_bank));
933 if (mrvlqspi_info == NULL) {
934 LOG_ERROR("not enough memory");
935 return ERROR_FAIL;
936 }
937
938 /* Get QSPI controller register map base address */
939 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[6], mrvlqspi_info->reg_base);
940 bank->driver_priv = mrvlqspi_info;
941 mrvlqspi_info->probed = 0;
942
943 return ERROR_OK;
944 }
945
946 struct flash_driver mrvlqspi_flash = {
947 .name = "mrvlqspi",
948 .flash_bank_command = mrvlqspi_flash_bank_command,
949 .erase = mrvlqspi_flash_erase,
950 .protect = NULL,
951 .write = mrvlqspi_flash_write,
952 .read = mrvlqspi_flash_read,
953 .probe = mrvlqspi_probe,
954 .auto_probe = mrvlqspi_auto_probe,
955 .erase_check = mrvlqspi_flash_erase_check,
956 .protect_check = mrvlqspi_protect_check,
957 .info = mrvlqspi_get_info,
958 };
Official OpenOCD Mirror