Use hardware reset and connect under reset on boards with ST-LINK/V2, as
[openocd.git] / tcl / board / stm32f4discovery.cfg
blobae54e18c470c7aa03b90741528423d4a13d65c91
1 # This is an STM32F4 discovery board with a single STM32F407VGT6 chip.
2 # http://www.st.com/internet/evalboard/product/252419.jsp
4 source [find interface/stlink-v2.cfg]
6 source [find target/stm32f4x_stlink.cfg]
8 # use hardware reset, connect under reset
9 reset_config srst_only srst_nogate