2 * Copyright (C) 2009 by Simon Qian
3 * SimonQian@SimonQian.com
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License along
16 * with this program; if not, write to the Free Software Foundation, Inc.,
17 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 /* The specification for SVF is available here:
22 * http://www.asset-intertech.com/support/svf.pdf
23 * Below, this document is refered to as the "SVF spec".
25 * The specification for XSVF is available here:
26 * http://www.xilinx.com/support/documentation/application_notes/xapp503.pdf
27 * Below, this document is refered to as the "XSVF spec".
34 #include <jtag/jtag.h>
36 #include <helper/time_support.h>
58 static const char *svf_command_name
[14] =
84 static const char *svf_trst_mode_name
[4] =
96 uint32_t num_of_moves
;
101 * These paths are from the SVF specification for the STATE command, to be
102 * used when the STATE command only includes the final state. The first
103 * element of the path is the "from" (current) state, and the last one is
104 * the "to" (target) state.
106 * All specified paths are the shortest ones in the JTAG spec, and are thus
107 * not (!!) exact matches for the paths used elsewhere in OpenOCD. Note
108 * that PAUSE-to-PAUSE transitions all go through UPDATE and then CAPTURE,
109 * which has specific effects on the various registers; they are not NOPs.
111 * Paths to RESET are disabled here. As elsewhere in OpenOCD, and in XSVF
112 * and many SVF implementations, we don't want to risk missing that state.
113 * To get to RESET, always we ignore the current state.
115 static const struct svf_statemove svf_statemoves
[] =
117 // from to num_of_moves, paths[8]
118 // {TAP_RESET, TAP_RESET, 1, {TAP_RESET}},
119 {TAP_RESET
, TAP_IDLE
, 2, {TAP_RESET
, TAP_IDLE
}},
120 {TAP_RESET
, TAP_DRPAUSE
, 6, {TAP_RESET
, TAP_IDLE
, TAP_DRSELECT
, TAP_DRCAPTURE
, TAP_DREXIT1
, TAP_DRPAUSE
}},
121 {TAP_RESET
, TAP_IRPAUSE
, 7, {TAP_RESET
, TAP_IDLE
, TAP_DRSELECT
, TAP_IRSELECT
, TAP_IRCAPTURE
, TAP_IREXIT1
, TAP_IRPAUSE
}},
123 // {TAP_IDLE, TAP_RESET, 4, {TAP_IDLE, TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}},
124 {TAP_IDLE
, TAP_IDLE
, 1, {TAP_IDLE
}},
125 {TAP_IDLE
, TAP_DRPAUSE
, 5, {TAP_IDLE
, TAP_DRSELECT
, TAP_DRCAPTURE
, TAP_DREXIT1
, TAP_DRPAUSE
}},
126 {TAP_IDLE
, TAP_IRPAUSE
, 6, {TAP_IDLE
, TAP_DRSELECT
, TAP_IRSELECT
, TAP_IRCAPTURE
, TAP_IREXIT1
, TAP_IRPAUSE
}},
128 // {TAP_DRPAUSE, TAP_RESET, 6, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}},
129 {TAP_DRPAUSE
, TAP_IDLE
, 4, {TAP_DRPAUSE
, TAP_DREXIT2
, TAP_DRUPDATE
, TAP_IDLE
}},
130 {TAP_DRPAUSE
, TAP_DRPAUSE
, 7, {TAP_DRPAUSE
, TAP_DREXIT2
, TAP_DRUPDATE
, TAP_DRSELECT
, TAP_DRCAPTURE
, TAP_DREXIT1
, TAP_DRPAUSE
}},
131 {TAP_DRPAUSE
, TAP_IRPAUSE
, 8, {TAP_DRPAUSE
, TAP_DREXIT2
, TAP_DRUPDATE
, TAP_DRSELECT
, TAP_IRSELECT
, TAP_IRCAPTURE
, TAP_IREXIT1
, TAP_IRPAUSE
}},
133 // {TAP_IRPAUSE, TAP_RESET, 6, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}},
134 {TAP_IRPAUSE
, TAP_IDLE
, 4, {TAP_IRPAUSE
, TAP_IREXIT2
, TAP_IRUPDATE
, TAP_IDLE
}},
135 {TAP_IRPAUSE
, TAP_DRPAUSE
, 7, {TAP_IRPAUSE
, TAP_IREXIT2
, TAP_IRUPDATE
, TAP_DRSELECT
, TAP_DRCAPTURE
, TAP_DREXIT1
, TAP_DRPAUSE
}},
136 {TAP_IRPAUSE
, TAP_IRPAUSE
, 8, {TAP_IRPAUSE
, TAP_IREXIT2
, TAP_IRUPDATE
, TAP_DRSELECT
, TAP_IRSELECT
, TAP_IRCAPTURE
, TAP_IREXIT1
, TAP_IRPAUSE
}}
140 #define XXR_TDI (1 << 0)
141 #define XXR_TDO (1 << 1)
142 #define XXR_MASK (1 << 2)
143 #define XXR_SMASK (1 << 3)
157 tap_state_t ir_end_state
;
158 tap_state_t dr_end_state
;
159 tap_state_t runtest_run_state
;
160 tap_state_t runtest_end_state
;
161 trst_mode_t trst_mode
;
163 struct svf_xxr_para hir_para
;
164 struct svf_xxr_para hdr_para
;
165 struct svf_xxr_para tir_para
;
166 struct svf_xxr_para tdr_para
;
167 struct svf_xxr_para sir_para
;
168 struct svf_xxr_para sdr_para
;
171 static struct svf_para svf_para
;
172 static const struct svf_para svf_para_init
=
174 // frequency, ir_end_state, dr_end_state, runtest_run_state, runtest_end_state, trst_mode
175 0, TAP_IDLE
, TAP_IDLE
, TAP_IDLE
, TAP_IDLE
, TRST_Z
,
177 // {len, data_mask, tdi, tdo, mask, smask},
178 {0, 0, NULL
, NULL
, NULL
, NULL
},
180 // {len, data_mask, tdi, tdo, mask, smask},
181 {0, 0, NULL
, NULL
, NULL
, NULL
},
183 // {len, data_mask, tdi, tdo, mask, smask},
184 {0, 0, NULL
, NULL
, NULL
, NULL
},
186 // {len, data_mask, tdi, tdo, mask, smask},
187 {0, 0, NULL
, NULL
, NULL
, NULL
},
189 // {len, data_mask, tdi, tdo, mask, smask},
190 {0, 0, NULL
, NULL
, NULL
, NULL
},
192 // {len, data_mask, tdi, tdo, mask, smask},
193 {0, 0, NULL
, NULL
, NULL
, NULL
},
196 struct svf_check_tdo_para
198 int line_num
; // used to record line number of the check operation
199 // so more information could be printed
200 int enabled
; // check is enabled or not
201 int buffer_offset
; // buffer_offset to buffers
202 int bit_len
; // bit length to check
205 #define SVF_CHECK_TDO_PARA_SIZE 1024
206 static struct svf_check_tdo_para
*svf_check_tdo_para
= NULL
;
207 static int svf_check_tdo_para_index
= 0;
209 static int svf_read_command_from_file(int fd
);
210 static int svf_check_tdo(void);
211 static int svf_add_check_para(uint8_t enabled
, int buffer_offset
, int bit_len
);
212 static int svf_run_command(struct command_context
*cmd_ctx
, char *cmd_str
);
214 static int svf_fd
= 0;
215 static char *svf_command_buffer
= NULL
;
216 static int svf_command_buffer_size
= 0;
217 static int svf_line_number
= 1;
219 static struct jtag_tap
*tap
= NULL
;
221 #define SVF_MAX_BUFFER_SIZE_TO_COMMIT (4 * 1024)
222 static uint8_t *svf_tdi_buffer
= NULL
, *svf_tdo_buffer
= NULL
, *svf_mask_buffer
= NULL
;
223 static int svf_buffer_index
= 0, svf_buffer_size
= 0;
224 static int svf_quiet
= 0;
227 static void svf_free_xxd_para(struct svf_xxr_para
*para
)
231 if (para
->tdi
!= NULL
)
236 if (para
->tdo
!= NULL
)
241 if (para
->mask
!= NULL
)
246 if (para
->smask
!= NULL
)
254 static unsigned svf_get_mask_u32(int bitlen
)
262 else if (bitlen
>= 32)
264 bitmask
= 0xFFFFFFFF;
268 bitmask
= (1 << bitlen
) - 1;
274 int svf_add_statemove(tap_state_t state_to
)
276 tap_state_t state_from
= cmd_queue_cur_state
;
279 /* when resetting, be paranoid and ignore current state */
280 if (state_to
== TAP_RESET
) {
285 for (index
= 0; index
< ARRAY_SIZE(svf_statemoves
); index
++)
287 if ((svf_statemoves
[index
].from
== state_from
)
288 && (svf_statemoves
[index
].to
== state_to
))
290 /* recorded path includes current state ... avoid extra TCKs! */
291 if (svf_statemoves
[index
].num_of_moves
> 1)
292 jtag_add_pathmove(svf_statemoves
[index
].num_of_moves
- 1,
293 svf_statemoves
[index
].paths
+ 1);
295 jtag_add_pathmove(svf_statemoves
[index
].num_of_moves
,
296 svf_statemoves
[index
].paths
);
300 LOG_ERROR("SVF: can not move to %s", tap_state_name(state_to
));
304 COMMAND_HANDLER(handle_svf_command
)
306 #define SVF_NUM_OF_OPTIONS 1
311 if ((CMD_ARGC
< 1) || (CMD_ARGC
> (1 + SVF_NUM_OF_OPTIONS
)))
313 command_print(CMD_CTX
, "usage: svf <file> [quiet]");
319 for (unsigned i
= 1; i
< CMD_ARGC
; i
++)
321 if (!strcmp(CMD_ARGV
[i
], "quiet"))
327 LOG_ERROR("unknown variant for svf: %s", CMD_ARGV
[i
]);
329 // no need to free anything now
334 if ((svf_fd
= open(CMD_ARGV
[0], O_RDONLY
)) < 0)
336 command_print(CMD_CTX
, "file \"%s\" not found", CMD_ARGV
[0]);
338 // no need to free anything now
342 LOG_USER("svf processing file: \"%s\"", CMD_ARGV
[0]);
345 time_ago
= timeval_ms();
349 svf_command_buffer_size
= 0;
351 svf_check_tdo_para_index
= 0;
352 svf_check_tdo_para
= malloc(sizeof(struct svf_check_tdo_para
) * SVF_CHECK_TDO_PARA_SIZE
);
353 if (NULL
== svf_check_tdo_para
)
355 LOG_ERROR("not enough memory");
360 svf_buffer_index
= 0;
361 // double the buffer size
362 // in case current command cannot be commited, and next command is a bit scan command
363 // here is 32K bits for this big scan command, it should be enough
364 // buffer will be reallocated if buffer size is not enough
365 svf_tdi_buffer
= (uint8_t *)malloc(2 * SVF_MAX_BUFFER_SIZE_TO_COMMIT
);
366 if (NULL
== svf_tdi_buffer
)
368 LOG_ERROR("not enough memory");
372 svf_tdo_buffer
= (uint8_t *)malloc(2 * SVF_MAX_BUFFER_SIZE_TO_COMMIT
);
373 if (NULL
== svf_tdo_buffer
)
375 LOG_ERROR("not enough memory");
379 svf_mask_buffer
= (uint8_t *)malloc(2 * SVF_MAX_BUFFER_SIZE_TO_COMMIT
);
380 if (NULL
== svf_mask_buffer
)
382 LOG_ERROR("not enough memory");
386 svf_buffer_size
= 2 * SVF_MAX_BUFFER_SIZE_TO_COMMIT
;
388 memcpy(&svf_para
, &svf_para_init
, sizeof(svf_para
));
393 while (ERROR_OK
== svf_read_command_from_file(svf_fd
))
395 if (ERROR_OK
!= svf_run_command(CMD_CTX
, svf_command_buffer
))
397 LOG_ERROR("fail to run command at line %d", svf_line_number
);
403 if (ERROR_OK
!= jtag_execute_queue())
407 else if (ERROR_OK
!= svf_check_tdo())
413 command_print(CMD_CTX
, "%lld ms used", timeval_ms() - time_ago
);
421 if (svf_command_buffer
)
423 free(svf_command_buffer
);
424 svf_command_buffer
= NULL
;
425 svf_command_buffer_size
= 0;
427 if (svf_check_tdo_para
)
429 free(svf_check_tdo_para
);
430 svf_check_tdo_para
= NULL
;
431 svf_check_tdo_para_index
= 0;
435 free(svf_tdi_buffer
);
436 svf_tdi_buffer
= NULL
;
440 free(svf_tdo_buffer
);
441 svf_tdo_buffer
= NULL
;
445 free(svf_mask_buffer
);
446 svf_mask_buffer
= NULL
;
448 svf_buffer_index
= 0;
451 svf_free_xxd_para(&svf_para
.hdr_para
);
452 svf_free_xxd_para(&svf_para
.hir_para
);
453 svf_free_xxd_para(&svf_para
.tdr_para
);
454 svf_free_xxd_para(&svf_para
.tir_para
);
455 svf_free_xxd_para(&svf_para
.sdr_para
);
456 svf_free_xxd_para(&svf_para
.sir_para
);
460 command_print(CMD_CTX
, "svf file programmed successfully for %d commands", command_num
);
464 command_print(CMD_CTX
, "svf file programmed failed");
470 #define SVFP_CMD_INC_CNT 1024
471 static int svf_read_command_from_file(int fd
)
474 char *tmp_buffer
= NULL
;
475 int cmd_pos
= 0, cmd_ok
= 0, slash
= 0, comment
= 0;
477 while (!cmd_ok
&& (read(fd
, &ch
, 1) > 0))
507 if (cmd_pos
>= svf_command_buffer_size
- 1)
509 tmp_buffer
= (char*)malloc(svf_command_buffer_size
+ SVFP_CMD_INC_CNT
); // 1 more byte for '\0'
510 if (NULL
== tmp_buffer
)
512 LOG_ERROR("not enough memory");
515 if (svf_command_buffer_size
> 0)
517 memcpy(tmp_buffer
, svf_command_buffer
, svf_command_buffer_size
);
519 if (svf_command_buffer
!= NULL
)
521 free(svf_command_buffer
);
523 svf_command_buffer
= tmp_buffer
;
524 svf_command_buffer_size
+= SVFP_CMD_INC_CNT
;
527 svf_command_buffer
[cmd_pos
++] = (char)toupper(ch
);
535 svf_command_buffer
[cmd_pos
] = '\0';
544 static int svf_parse_cmd_string(char *str
, int len
, char **argus
, int *num_of_argu
)
546 int pos
= 0, num
= 0, space_found
= 1;
556 LOG_ERROR("fail to parse svf command");
566 argus
[num
++] = &str
[pos
];
579 bool svf_tap_state_is_stable(tap_state_t state
)
581 return (TAP_RESET
== state
) || (TAP_IDLE
== state
)
582 || (TAP_DRPAUSE
== state
) || (TAP_IRPAUSE
== state
);
585 static int svf_find_string_in_array(char *str
, char **strs
, int num_of_element
)
589 for (i
= 0; i
< num_of_element
; i
++)
591 if (!strcmp(str
, strs
[i
]))
599 static int svf_adjust_array_length(uint8_t **arr
, int orig_bit_len
, int new_bit_len
)
601 int new_byte_len
= (new_bit_len
+ 7) >> 3;
603 if ((NULL
== *arr
) || (((orig_bit_len
+ 7) >> 3) < ((new_bit_len
+ 7) >> 3)))
610 *arr
= (uint8_t*)malloc(new_byte_len
);
613 LOG_ERROR("not enough memory");
616 memset(*arr
, 0, new_byte_len
);
621 static int svf_copy_hexstring_to_binary(char *str
, uint8_t **bin
, int orig_bit_len
, int bit_len
)
623 int i
, str_len
= strlen(str
), str_hbyte_len
= (bit_len
+ 3) >> 2;
626 if (ERROR_OK
!= svf_adjust_array_length(bin
, orig_bit_len
, bit_len
))
628 LOG_ERROR("fail to adjust length of array");
632 for (i
= 0; i
< str_hbyte_len
; i
++)
641 if ((ch
>= '0') && (ch
<= '9'))
646 else if ((ch
>= 'A') && (ch
<= 'F'))
653 LOG_ERROR("invalid hex string");
665 (*bin
)[i
/ 2] |= ch
<< 4;
675 // consume optional leading '0' characters
676 while (str_len
> 0 && str
[str_len
- 1] == '0')
680 if (str_len
> 0 || (ch
& ~((2 << ((bit_len
- 1) % 4)) - 1)) != 0)
682 LOG_ERROR("value execeeds length");
689 static int svf_check_tdo(void)
693 for (i
= 0; i
< svf_check_tdo_para_index
; i
++)
695 index
= svf_check_tdo_para
[i
].buffer_offset
;
696 len
= svf_check_tdo_para
[i
].bit_len
;
697 if ((svf_check_tdo_para
[i
].enabled
)
698 && buf_cmp_mask(&svf_tdi_buffer
[index
], &svf_tdo_buffer
[index
], &svf_mask_buffer
[index
], len
))
701 unsigned received
, expected
, tapmask
;
702 bitmask
= svf_get_mask_u32(svf_check_tdo_para
[i
].bit_len
);
704 memcpy(&received
, svf_tdi_buffer
+ index
, sizeof(unsigned));
705 memcpy(&expected
, svf_tdo_buffer
+ index
, sizeof(unsigned));
706 memcpy(&tapmask
, svf_mask_buffer
+ index
, sizeof(unsigned));
707 LOG_ERROR("tdo check error at line %d",
708 svf_check_tdo_para
[i
].line_num
);
709 LOG_ERROR("read = 0x%X, want = 0x%X, mask = 0x%X",
716 svf_check_tdo_para_index
= 0;
721 static int svf_add_check_para(uint8_t enabled
, int buffer_offset
, int bit_len
)
723 if (svf_check_tdo_para_index
>= SVF_CHECK_TDO_PARA_SIZE
)
725 LOG_ERROR("toooooo many operation undone");
729 svf_check_tdo_para
[svf_check_tdo_para_index
].line_num
= svf_line_number
;
730 svf_check_tdo_para
[svf_check_tdo_para_index
].bit_len
= bit_len
;
731 svf_check_tdo_para
[svf_check_tdo_para_index
].enabled
= enabled
;
732 svf_check_tdo_para
[svf_check_tdo_para_index
].buffer_offset
= buffer_offset
;
733 svf_check_tdo_para_index
++;
738 static int svf_execute_tap(void)
740 if (ERROR_OK
!= jtag_execute_queue())
744 else if (ERROR_OK
!= svf_check_tdo())
749 svf_buffer_index
= 0;
754 static int svf_run_command(struct command_context
*cmd_ctx
, char *cmd_str
)
756 char *argus
[256], command
;
757 int num_of_argu
= 0, i
;
764 float min_time
, max_time
;
766 struct svf_xxr_para
*xxr_para_tmp
;
767 uint8_t **pbuffer_tmp
;
768 struct scan_field field
;
770 tap_state_t
*path
= NULL
, state
;
774 LOG_USER("%s", svf_command_buffer
);
777 if (ERROR_OK
!= svf_parse_cmd_string(cmd_str
, strlen(cmd_str
), argus
, &num_of_argu
))
782 /* NOTE: we're a bit loose here, because we ignore case in
783 * TAP state names (instead of insisting on uppercase).
786 command
= svf_find_string_in_array(argus
[0],
787 (char **)svf_command_name
, ARRAY_SIZE(svf_command_name
));
792 if (num_of_argu
!= 2)
794 LOG_ERROR("invalid parameter of %s", argus
[0]);
798 i_tmp
= tap_state_by_name(argus
[1]);
800 if (svf_tap_state_is_stable(i_tmp
))
802 if (command
== ENDIR
)
804 svf_para
.ir_end_state
= i_tmp
;
805 LOG_DEBUG("\tIR end_state = %s",
806 tap_state_name(i_tmp
));
810 svf_para
.dr_end_state
= i_tmp
;
811 LOG_DEBUG("\tDR end_state = %s",
812 tap_state_name(i_tmp
));
817 LOG_ERROR("%s: %s is not a stable state",
823 if ((num_of_argu
!= 1) && (num_of_argu
!= 3))
825 LOG_ERROR("invalid parameter of %s", argus
[0]);
828 if (1 == num_of_argu
)
830 // TODO: set jtag speed to full speed
831 svf_para
.frequency
= 0;
835 if (strcmp(argus
[2], "HZ"))
837 LOG_ERROR("HZ not found in FREQUENCY command");
840 if (ERROR_OK
!= svf_execute_tap())
844 svf_para
.frequency
= atof(argus
[1]);
845 // TODO: set jtag speed to
846 if (svf_para
.frequency
> 0)
848 command_run_linef(cmd_ctx
, "jtag_khz %d", (int)svf_para
.frequency
/ 1000);
849 LOG_DEBUG("\tfrequency = %f", svf_para
.frequency
);
854 xxr_para_tmp
= &svf_para
.hdr_para
;
857 xxr_para_tmp
= &svf_para
.hir_para
;
860 xxr_para_tmp
= &svf_para
.tdr_para
;
863 xxr_para_tmp
= &svf_para
.tir_para
;
866 xxr_para_tmp
= &svf_para
.sdr_para
;
869 xxr_para_tmp
= &svf_para
.sir_para
;
872 // XXR length [TDI (tdi)] [TDO (tdo)][MASK (mask)] [SMASK (smask)]
873 if ((num_of_argu
> 10) || (num_of_argu
% 2))
875 LOG_ERROR("invalid parameter of %s", argus
[0]);
878 i_tmp
= xxr_para_tmp
->len
;
879 xxr_para_tmp
->len
= atoi(argus
[1]);
880 LOG_DEBUG("\tlength = %d", xxr_para_tmp
->len
);
881 xxr_para_tmp
->data_mask
= 0;
882 for (i
= 2; i
< num_of_argu
; i
+= 2)
884 if ((strlen(argus
[i
+ 1]) < 3) || (argus
[i
+ 1][0] != '(') || (argus
[i
+ 1][strlen(argus
[i
+ 1]) - 1] != ')'))
886 LOG_ERROR("data section error");
889 argus
[i
+ 1][strlen(argus
[i
+ 1]) - 1] = '\0';
890 // TDI, TDO, MASK, SMASK
891 if (!strcmp(argus
[i
], "TDI"))
894 pbuffer_tmp
= &xxr_para_tmp
->tdi
;
895 xxr_para_tmp
->data_mask
|= XXR_TDI
;
897 else if (!strcmp(argus
[i
], "TDO"))
900 pbuffer_tmp
= &xxr_para_tmp
->tdo
;
901 xxr_para_tmp
->data_mask
|= XXR_TDO
;
903 else if (!strcmp(argus
[i
], "MASK"))
906 pbuffer_tmp
= &xxr_para_tmp
->mask
;
907 xxr_para_tmp
->data_mask
|= XXR_MASK
;
909 else if (!strcmp(argus
[i
], "SMASK"))
912 pbuffer_tmp
= &xxr_para_tmp
->smask
;
913 xxr_para_tmp
->data_mask
|= XXR_SMASK
;
917 LOG_ERROR("unknow parameter: %s", argus
[i
]);
920 if (ERROR_OK
!= svf_copy_hexstring_to_binary(&argus
[i
+ 1][1], pbuffer_tmp
, i_tmp
, xxr_para_tmp
->len
))
922 LOG_ERROR("fail to parse hex value");
925 LOG_DEBUG("\t%s = 0x%X", argus
[i
], (**(int**)pbuffer_tmp
) & svf_get_mask_u32(xxr_para_tmp
->len
));
927 // If a command changes the length of the last scan of the same type and the MASK parameter is absent,
928 // the mask pattern used is all cares
929 if (!(xxr_para_tmp
->data_mask
& XXR_MASK
) && (i_tmp
!= xxr_para_tmp
->len
))
931 // MASK not defined and length changed
932 if (ERROR_OK
!= svf_adjust_array_length(&xxr_para_tmp
->mask
, i_tmp
, xxr_para_tmp
->len
))
934 LOG_ERROR("fail to adjust length of array");
937 buf_set_ones(xxr_para_tmp
->mask
, xxr_para_tmp
->len
);
939 // If TDO is absent, no comparison is needed, set the mask to 0
940 if (!(xxr_para_tmp
->data_mask
& XXR_TDO
))
942 if (NULL
== xxr_para_tmp
->tdo
)
944 if (ERROR_OK
!= svf_adjust_array_length(&xxr_para_tmp
->tdo
, i_tmp
, xxr_para_tmp
->len
))
946 LOG_ERROR("fail to adjust length of array");
950 if (NULL
== xxr_para_tmp
->mask
)
952 if (ERROR_OK
!= svf_adjust_array_length(&xxr_para_tmp
->mask
, i_tmp
, xxr_para_tmp
->len
))
954 LOG_ERROR("fail to adjust length of array");
958 memset(xxr_para_tmp
->mask
, 0, (xxr_para_tmp
->len
+ 7) >> 3);
960 // do scan if necessary
963 // check buffer size first, reallocate if necessary
964 i
= svf_para
.hdr_para
.len
+ svf_para
.sdr_para
.len
+ svf_para
.tdr_para
.len
;
965 if ((svf_buffer_size
- svf_buffer_index
) < ((i
+ 7) >> 3))
968 // simply print error message
969 LOG_ERROR("buffer is not enough, report to author");
975 buffer_tmp
= (uint8_t *)malloc(svf_buffer_index
+ ((i
+ 7) >> 3));
976 if (NULL
== buffer_tmp
)
978 LOG_ERROR("not enough memory");
981 memcpy(buffer_tmp
, svf_tdi_buffer
, svf_buffer_index
);
982 // svf_tdi_buffer isn't NULL here
983 free(svf_tdi_buffer
);
984 svf_tdi_buffer
= buffer_tmp
;
986 buffer_tmp
= (uint8_t *)malloc(svf_buffer_index
+ ((i
+ 7) >> 3));
987 if (NULL
== buffer_tmp
)
989 LOG_ERROR("not enough memory");
992 memcpy(buffer_tmp
, svf_tdo_buffer
, svf_buffer_index
);
993 // svf_tdo_buffer isn't NULL here
994 free(svf_tdo_buffer
);
995 svf_tdo_buffer
= buffer_tmp
;
997 buffer_tmp
= (uint8_t *)malloc(svf_buffer_index
+ ((i
+ 7) >> 3));
998 if (NULL
== buffer_tmp
)
1000 LOG_ERROR("not enough memory");
1003 memcpy(buffer_tmp
, svf_mask_buffer
, svf_buffer_index
);
1004 // svf_mask_buffer isn't NULL here
1005 free(svf_mask_buffer
);
1006 svf_mask_buffer
= buffer_tmp
;
1009 svf_buffer_size
= svf_buffer_index
+ ((i
+ 7) >> 3);
1015 buf_set_buf(svf_para
.hdr_para
.tdi
, 0, &svf_tdi_buffer
[svf_buffer_index
], i
, svf_para
.hdr_para
.len
);
1016 i
+= svf_para
.hdr_para
.len
;
1017 buf_set_buf(svf_para
.sdr_para
.tdi
, 0, &svf_tdi_buffer
[svf_buffer_index
], i
, svf_para
.sdr_para
.len
);
1018 i
+= svf_para
.sdr_para
.len
;
1019 buf_set_buf(svf_para
.tdr_para
.tdi
, 0, &svf_tdi_buffer
[svf_buffer_index
], i
, svf_para
.tdr_para
.len
);
1020 i
+= svf_para
.tdr_para
.len
;
1023 if (svf_para
.sdr_para
.data_mask
& XXR_TDO
)
1025 // assemble dr mask data
1027 buf_set_buf(svf_para
.hdr_para
.mask
, 0, &svf_mask_buffer
[svf_buffer_index
], i
, svf_para
.hdr_para
.len
);
1028 i
+= svf_para
.hdr_para
.len
;
1029 buf_set_buf(svf_para
.sdr_para
.mask
, 0, &svf_mask_buffer
[svf_buffer_index
], i
, svf_para
.sdr_para
.len
);
1030 i
+= svf_para
.sdr_para
.len
;
1031 buf_set_buf(svf_para
.tdr_para
.mask
, 0, &svf_mask_buffer
[svf_buffer_index
], i
, svf_para
.tdr_para
.len
);
1032 i
+= svf_para
.tdr_para
.len
;
1033 // assemble dr check data
1035 buf_set_buf(svf_para
.hdr_para
.tdo
, 0, &svf_tdo_buffer
[svf_buffer_index
], i
, svf_para
.hdr_para
.len
);
1036 i
+= svf_para
.hdr_para
.len
;
1037 buf_set_buf(svf_para
.sdr_para
.tdo
, 0, &svf_tdo_buffer
[svf_buffer_index
], i
, svf_para
.sdr_para
.len
);
1038 i
+= svf_para
.sdr_para
.len
;
1039 buf_set_buf(svf_para
.tdr_para
.tdo
, 0, &svf_tdo_buffer
[svf_buffer_index
], i
, svf_para
.tdr_para
.len
);
1040 i
+= svf_para
.tdr_para
.len
;
1042 svf_add_check_para(1, svf_buffer_index
, i
);
1046 svf_add_check_para(0, svf_buffer_index
, i
);
1050 field
.out_value
= &svf_tdi_buffer
[svf_buffer_index
];
1051 field
.in_value
= &svf_tdi_buffer
[svf_buffer_index
];
1052 /* NOTE: doesn't use SVF-specified state paths */
1053 jtag_add_plain_dr_scan(1, &field
, svf_para
.dr_end_state
);
1055 svf_buffer_index
+= (i
+ 7) >> 3;
1057 else if (SIR
== command
)
1059 // check buffer size first, reallocate if necessary
1060 i
= svf_para
.hir_para
.len
+ svf_para
.sir_para
.len
+ svf_para
.tir_para
.len
;
1061 if ((svf_buffer_size
- svf_buffer_index
) < ((i
+ 7) >> 3))
1064 // simply print error message
1065 LOG_ERROR("buffer is not enough, report to author");
1068 uint8_t *buffer_tmp
;
1070 // reallocate buffer
1071 buffer_tmp
= (uint8_t *)malloc(svf_buffer_index
+ ((i
+ 7) >> 3));
1072 if (NULL
== buffer_tmp
)
1074 LOG_ERROR("not enough memory");
1077 memcpy(buffer_tmp
, svf_tdi_buffer
, svf_buffer_index
);
1078 // svf_tdi_buffer isn't NULL here
1079 free(svf_tdi_buffer
);
1080 svf_tdi_buffer
= buffer_tmp
;
1082 buffer_tmp
= (uint8_t *)malloc(svf_buffer_index
+ ((i
+ 7) >> 3));
1083 if (NULL
== buffer_tmp
)
1085 LOG_ERROR("not enough memory");
1088 memcpy(buffer_tmp
, svf_tdo_buffer
, svf_buffer_index
);
1089 // svf_tdo_buffer isn't NULL here
1090 free(svf_tdo_buffer
);
1091 svf_tdo_buffer
= buffer_tmp
;
1093 buffer_tmp
= (uint8_t *)malloc(svf_buffer_index
+ ((i
+ 7) >> 3));
1094 if (NULL
== buffer_tmp
)
1096 LOG_ERROR("not enough memory");
1099 memcpy(buffer_tmp
, svf_mask_buffer
, svf_buffer_index
);
1100 // svf_mask_buffer isn't NULL here
1101 free(svf_mask_buffer
);
1102 svf_mask_buffer
= buffer_tmp
;
1105 svf_buffer_size
= svf_buffer_index
+ ((i
+ 7) >> 3);
1111 buf_set_buf(svf_para
.hir_para
.tdi
, 0, &svf_tdi_buffer
[svf_buffer_index
], i
, svf_para
.hir_para
.len
);
1112 i
+= svf_para
.hir_para
.len
;
1113 buf_set_buf(svf_para
.sir_para
.tdi
, 0, &svf_tdi_buffer
[svf_buffer_index
], i
, svf_para
.sir_para
.len
);
1114 i
+= svf_para
.sir_para
.len
;
1115 buf_set_buf(svf_para
.tir_para
.tdi
, 0, &svf_tdi_buffer
[svf_buffer_index
], i
, svf_para
.tir_para
.len
);
1116 i
+= svf_para
.tir_para
.len
;
1119 if (svf_para
.sir_para
.data_mask
& XXR_TDO
)
1121 // assemble dr mask data
1123 buf_set_buf(svf_para
.hir_para
.mask
, 0, &svf_mask_buffer
[svf_buffer_index
], i
, svf_para
.hir_para
.len
);
1124 i
+= svf_para
.hir_para
.len
;
1125 buf_set_buf(svf_para
.sir_para
.mask
, 0, &svf_mask_buffer
[svf_buffer_index
], i
, svf_para
.sir_para
.len
);
1126 i
+= svf_para
.sir_para
.len
;
1127 buf_set_buf(svf_para
.tir_para
.mask
, 0, &svf_mask_buffer
[svf_buffer_index
], i
, svf_para
.tir_para
.len
);
1128 i
+= svf_para
.tir_para
.len
;
1129 // assemble dr check data
1131 buf_set_buf(svf_para
.hir_para
.tdo
, 0, &svf_tdo_buffer
[svf_buffer_index
], i
, svf_para
.hir_para
.len
);
1132 i
+= svf_para
.hir_para
.len
;
1133 buf_set_buf(svf_para
.sir_para
.tdo
, 0, &svf_tdo_buffer
[svf_buffer_index
], i
, svf_para
.sir_para
.len
);
1134 i
+= svf_para
.sir_para
.len
;
1135 buf_set_buf(svf_para
.tir_para
.tdo
, 0, &svf_tdo_buffer
[svf_buffer_index
], i
, svf_para
.tir_para
.len
);
1136 i
+= svf_para
.tir_para
.len
;
1138 svf_add_check_para(1, svf_buffer_index
, i
);
1142 svf_add_check_para(0, svf_buffer_index
, i
);
1146 field
.out_value
= &svf_tdi_buffer
[svf_buffer_index
];
1147 field
.in_value
= &svf_tdi_buffer
[svf_buffer_index
];
1148 /* NOTE: doesn't use SVF-specified state paths */
1149 jtag_add_plain_ir_scan(1, &field
, svf_para
.ir_end_state
);
1151 svf_buffer_index
+= (i
+ 7) >> 3;
1156 LOG_ERROR("PIO and PIOMAP are not supported");
1160 // RUNTEST [run_state] run_count run_clk [min_time SEC [MAXIMUM max_time SEC]] [ENDSTATE end_state]
1161 // RUNTEST [run_state] min_time SEC [MAXIMUM max_time SEC] [ENDSTATE end_state]
1162 if ((num_of_argu
< 3) && (num_of_argu
> 11))
1164 LOG_ERROR("invalid parameter of %s", argus
[0]);
1174 i_tmp
= tap_state_by_name(argus
[i
]);
1175 if (i_tmp
!= TAP_INVALID
)
1177 if (svf_tap_state_is_stable(i_tmp
))
1179 svf_para
.runtest_run_state
= i_tmp
;
1181 /* When a run_state is specified, the new
1182 * run_state becomes the default end_state.
1184 svf_para
.runtest_end_state
= i_tmp
;
1185 LOG_DEBUG("\trun_state = %s",
1186 tap_state_name(i_tmp
));
1191 LOG_ERROR("%s: %s is not a stable state",
1192 argus
[0], tap_state_name(i_tmp
));
1197 // run_count run_clk
1198 if (((i
+ 2) <= num_of_argu
) && strcmp(argus
[i
+ 1], "SEC"))
1200 if (!strcmp(argus
[i
+ 1], "TCK"))
1202 // clock source is TCK
1203 run_count
= atoi(argus
[i
]);
1204 LOG_DEBUG("\trun_count@TCK = %d", run_count
);
1208 LOG_ERROR("%s not supported for clock", argus
[i
+ 1]);
1214 if (((i
+ 2) <= num_of_argu
) && !strcmp(argus
[i
+ 1], "SEC"))
1216 min_time
= atof(argus
[i
]);
1217 LOG_DEBUG("\tmin_time = %fs", min_time
);
1220 // MAXIMUM max_time SEC
1221 if (((i
+ 3) <= num_of_argu
) && !strcmp(argus
[i
], "MAXIMUM") && !strcmp(argus
[i
+ 2], "SEC"))
1223 max_time
= atof(argus
[i
+ 1]);
1224 LOG_DEBUG("\tmax_time = %fs", max_time
);
1227 // ENDSTATE end_state
1228 if (((i
+ 2) <= num_of_argu
) && !strcmp(argus
[i
], "ENDSTATE"))
1230 i_tmp
= tap_state_by_name(argus
[i
+ 1]);
1232 if (svf_tap_state_is_stable(i_tmp
))
1234 svf_para
.runtest_end_state
= i_tmp
;
1235 LOG_DEBUG("\tend_state = %s",
1236 tap_state_name(i_tmp
));
1240 LOG_ERROR("%s: %s is not a stable state",
1241 argus
[0], tap_state_name(i_tmp
));
1246 // calculate run_count
1247 if ((0 == run_count
) && (min_time
> 0))
1249 run_count
= min_time
* svf_para
.frequency
;
1251 // all parameter should be parsed
1252 if (i
== num_of_argu
)
1256 // run_state and end_state is checked to be stable state
1259 /* FIXME handle statemove failures */
1262 // enter into run_state if necessary
1263 if (cmd_queue_cur_state
!= svf_para
.runtest_run_state
)
1265 retval
= svf_add_statemove(svf_para
.runtest_run_state
);
1268 // call jtag_add_clocks
1269 jtag_add_clocks(run_count
);
1271 // move to end_state if necessary
1272 if (svf_para
.runtest_end_state
!= svf_para
.runtest_run_state
)
1274 retval
= svf_add_statemove(svf_para
.runtest_end_state
);
1277 if (svf_para
.runtest_run_state
!= TAP_IDLE
)
1279 LOG_ERROR("cannot runtest in %s state",
1280 tap_state_name(svf_para
.runtest_run_state
));
1284 jtag_add_runtest(run_count
, svf_para
.runtest_end_state
);
1290 LOG_ERROR("fail to parse parameter of RUNTEST, %d out of %d is parsed", i
, num_of_argu
);
1295 // STATE [pathstate1 [pathstate2 ...[pathstaten]]] stable_state
1296 if (num_of_argu
< 2)
1298 LOG_ERROR("invalid parameter of %s", argus
[0]);
1301 if (num_of_argu
> 2)
1303 // STATE pathstate1 ... stable_state
1304 path
= (tap_state_t
*)malloc((num_of_argu
- 1) * sizeof(tap_state_t
));
1307 LOG_ERROR("not enough memory");
1310 num_of_argu
--; // num of path
1311 i_tmp
= 1; /* path is from parameter 1 */
1312 for (i
= 0; i
< num_of_argu
; i
++, i_tmp
++)
1314 path
[i
] = tap_state_by_name(argus
[i_tmp
]);
1315 if (path
[i
] == TAP_INVALID
)
1317 LOG_ERROR("%s: %s is not a valid state",
1318 argus
[0], argus
[i_tmp
]);
1322 /* OpenOCD refuses paths containing TAP_RESET */
1323 if (TAP_RESET
== path
[i
])
1325 /* FIXME last state MUST be stable! */
1328 jtag_add_pathmove(i
, path
);
1331 num_of_argu
-= i
+ 1;
1335 if (num_of_argu
> 0)
1337 // execute last path if necessary
1338 if (svf_tap_state_is_stable(path
[num_of_argu
- 1]))
1340 // last state MUST be stable state
1341 jtag_add_pathmove(num_of_argu
, path
);
1342 LOG_DEBUG("\tmove to %s by path_move",
1343 tap_state_name(path
[num_of_argu
- 1]));
1347 LOG_ERROR("%s: %s is not a stable state",
1349 tap_state_name(path
[num_of_argu
- 1]));
1360 // STATE stable_state
1361 state
= tap_state_by_name(argus
[1]);
1362 if (svf_tap_state_is_stable(state
))
1364 LOG_DEBUG("\tmove to %s by svf_add_statemove",
1365 tap_state_name(state
));
1366 /* FIXME handle statemove failures */
1367 svf_add_statemove(state
);
1371 LOG_ERROR("%s: %s is not a stable state",
1372 argus
[0], tap_state_name(state
));
1379 if (num_of_argu
!= 2)
1381 LOG_ERROR("invalid parameter of %s", argus
[0]);
1384 if (svf_para
.trst_mode
!= TRST_ABSENT
)
1386 if (ERROR_OK
!= svf_execute_tap())
1390 i_tmp
= svf_find_string_in_array(argus
[1],
1391 (char **)svf_trst_mode_name
,
1392 ARRAY_SIZE(svf_trst_mode_name
));
1396 jtag_add_reset(1, 0);
1400 jtag_add_reset(0, 0);
1405 LOG_ERROR("unknown TRST mode: %s", argus
[1]);
1408 svf_para
.trst_mode
= i_tmp
;
1409 LOG_DEBUG("\ttrst_mode = %s", svf_trst_mode_name
[svf_para
.trst_mode
]);
1413 LOG_ERROR("can not accpet TRST command if trst_mode is ABSENT");
1418 LOG_ERROR("invalid svf command: %s", argus
[0]);
1423 if (debug_level
>= LOG_LVL_DEBUG
)
1425 // for convenient debugging, execute tap if possible
1426 if ((svf_buffer_index
> 0) && \
1427 (((command
!= STATE
) && (command
!= RUNTEST
)) || \
1428 ((command
== STATE
) && (num_of_argu
== 2))))
1430 if (ERROR_OK
!= svf_execute_tap())
1435 // output debug info
1436 if ((SIR
== command
) || (SDR
== command
))
1439 memcpy(&read_value
, svf_tdi_buffer
, sizeof(int));
1440 // in debug mode, data is from index 0
1441 int read_mask
= svf_get_mask_u32(svf_check_tdo_para
[0].bit_len
);
1442 LOG_DEBUG("\tTDO read = 0x%X", read_value
& read_mask
);
1448 // for fast executing, execute tap if necessary
1449 // half of the buffer is for the next command
1450 if (((svf_buffer_index
>= SVF_MAX_BUFFER_SIZE_TO_COMMIT
) || (svf_check_tdo_para_index
>= SVF_CHECK_TDO_PARA_SIZE
/ 2)) && \
1451 (((command
!= STATE
) && (command
!= RUNTEST
)) || \
1452 ((command
== STATE
) && (num_of_argu
== 2))))
1454 return svf_execute_tap();
1461 static const struct command_registration svf_command_handlers
[] = {
1464 .handler
= handle_svf_command
,
1465 .mode
= COMMAND_EXEC
,
1466 .help
= "Runs a SVF file.",
1467 .usage
= "filename ['quiet']",
1469 COMMAND_REGISTRATION_DONE
1472 int svf_register_commands(struct command_context
*cmd_ctx
)
1474 return register_commands(cmd_ctx
, NULL
, svf_command_handlers
);