?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
flash: fix stm32 failed probe using incorrect flash size
[openocd.git] / src / flash / nor / stm32f2x.c
blobaa749a510a1228819dfbbd47266b6090b4aa273d
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
7 * *
8 * Copyright (C) 2011 Øyvind Harboe *
9 * oyvind.harboe@zylin.com *
10 * *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
15 * *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
20 * *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 ***************************************************************************/
26
27 #ifdef HAVE_CONFIG_H
28 #include "config.h"
29 #endif
30
31 #include "imp.h"
32 #include <helper/binarybuffer.h>
33 #include <target/algorithm.h>
34 #include <target/armv7m.h>
35
36 /* Regarding performance:
37 *
38 * Short story - it might be best to leave the performance at
39 * current levels.
40 *
41 * You may see a jump in speed if you change to using
42 * 32bit words for the block programming.
43 *
44 * Its a shame you cannot use the double word as its
45 * even faster - but you require external VPP for that mode.
46 *
47 * Having said all that 16bit writes give us the widest vdd
48 * operating range, so may be worth adding a note to that effect.
49 *
50 */
51
52 /* Danger!!!! The STM32F1x and STM32F2x series actually have
53 * quite different flash controllers.
54 *
55 * What's more scary is that the names of the registers and their
56 * addresses are the same, but the actual bits and what they do are
57 * can be very different.
58 *
59 * To reduce testing complexity and dangers of regressions,
60 * a seperate file is used for stm32fx2x.
61 *
62 * 1mByte part with 4 x 16, 1 x 64, 7 x 128kBytes sectors
63 *
64 * What's the protection page size???
65 *
66 * Tested with STM3220F-EVAL board.
67 *
68 * STM32F21xx series for reference.
69 *
70 * RM0033
71 * http://www.st.com/internet/mcu/product/250192.jsp
72 *
73 * PM0059
74 * www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/
75 * PROGRAMMING_MANUAL/CD00233952.pdf
76 *
77 * STM32F1x series - notice that this code was copy, pasted and knocked
78 * into a stm32f2x driver, so in case something has been converted or
79 * bugs haven't been fixed, here are the original manuals:
80 *
81 * RM0008 - Reference manual
82 *
83 * RM0042, the Flash programming manual for low-, medium- high-density and
84 * connectivity line STM32F10x devices
85 *
86 * PM0068, the Flash programming manual for XL-density STM32F10x devices.
87 *
88 */
89
90 /* Erase time can be as high as 1000ms, 10x this and it's toast... */
91 #define FLASH_ERASE_TIMEOUT 10000
92 #define FLASH_WRITE_TIMEOUT 5
93
94 #define STM32_FLASH_BASE 0x40023c00
95 #define STM32_FLASH_ACR 0x40023c00
96 #define STM32_FLASH_KEYR 0x40023c04
97 #define STM32_FLASH_OPTKEYR 0x40023c08
98 #define STM32_FLASH_SR 0x40023c0C
99 #define STM32_FLASH_CR 0x40023c10
100 #define STM32_FLASH_OPTCR 0x40023c14
101 #define STM32_FLASH_OPTCR1 0x40023c18
102
103 /* FLASH_CR register bits */
104
105 #define FLASH_PG (1 << 0)
106 #define FLASH_SER (1 << 1)
107 #define FLASH_MER (1 << 2)
108 #define FLASH_MER1 (1 << 15)
109 #define FLASH_STRT (1 << 16)
110 #define FLASH_PSIZE_8 (0 << 8)
111 #define FLASH_PSIZE_16 (1 << 8)
112 #define FLASH_PSIZE_32 (2 << 8)
113 #define FLASH_PSIZE_64 (3 << 8)
114 #define FLASH_SNB(a) ((a) << 3)
115 #define FLASH_LOCK (1 << 31)
116
117 /* FLASH_SR register bits */
118
119 #define FLASH_BSY (1 << 16)
120 #define FLASH_PGSERR (1 << 7) /* Programming sequence error */
121 #define FLASH_PGPERR (1 << 6) /* Programming parallelism error */
122 #define FLASH_PGAERR (1 << 5) /* Programming alignment error */
123 #define FLASH_WRPERR (1 << 4) /* Write protection error */
124 #define FLASH_OPERR (1 << 1) /* Operation error */
125
126 #define FLASH_ERROR (FLASH_PGSERR | FLASH_PGPERR | FLASH_PGAERR | FLASH_WRPERR | FLASH_OPERR)
127
128 /* STM32_FLASH_OPTCR register bits */
129
130 #define OPT_LOCK (1 << 0)
131 #define OPT_START (1 << 1)
132
133 /* STM32_FLASH_OBR bit definitions (reading) */
134
135 #define OPT_ERROR 0
136 #define OPT_READOUT 1
137 #define OPT_RDWDGSW 2
138 #define OPT_RDRSTSTOP 3
139 #define OPT_RDRSTSTDBY 4
140 #define OPT_BFB2 5 /* dual flash bank only */
141
142 /* register unlock keys */
143
144 #define KEY1 0x45670123
145 #define KEY2 0xCDEF89AB
146
147 /* option register unlock key */
148 #define OPTKEY1 0x08192A3B
149 #define OPTKEY2 0x4C5D6E7F
150
151 struct stm32x_options {
152 uint8_t RDP;
153 uint8_t user_options;
154 uint32_t protection;
155 };
156
157 struct stm32x_flash_bank {
158 struct stm32x_options option_bytes;
159 int probed;
160 bool has_large_mem; /* stm32f42x/stm32f43x family */
161 uint32_t user_bank_size;
162 };
163
164 /* flash bank stm32x <base> <size> 0 0 <target#>
165 */
166 FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
167 {
168 struct stm32x_flash_bank *stm32x_info;
169
170 if (CMD_ARGC < 6)
171 return ERROR_COMMAND_SYNTAX_ERROR;
172
173 stm32x_info = malloc(sizeof(struct stm32x_flash_bank));
174 bank->driver_priv = stm32x_info;
175
176 stm32x_info->probed = 0;
177 stm32x_info->user_bank_size = bank->size;
178
179 return ERROR_OK;
180 }
181
182 static inline int stm32x_get_flash_reg(struct flash_bank *bank, uint32_t reg)
183 {
184 return reg;
185 }
186
187 static inline int stm32x_get_flash_status(struct flash_bank *bank, uint32_t *status)
188 {
189 struct target *target = bank->target;
190 return target_read_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), status);
191 }
192
193 static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout)
194 {
195 struct target *target = bank->target;
196 uint32_t status;
197 int retval = ERROR_OK;
198
199 /* wait for busy to clear */
200 for (;;) {
201 retval = stm32x_get_flash_status(bank, &status);
202 if (retval != ERROR_OK)
203 return retval;
204 LOG_DEBUG("status: 0x%" PRIx32 "", status);
205 if ((status & FLASH_BSY) == 0)
206 break;
207 if (timeout-- <= 0) {
208 LOG_ERROR("timed out waiting for flash");
209 return ERROR_FAIL;
210 }
211 alive_sleep(1);
212 }
213
214
215 if (status & FLASH_WRPERR) {
216 LOG_ERROR("stm32x device protected");
217 retval = ERROR_FAIL;
218 }
219
220 /* Clear but report errors */
221 if (status & FLASH_ERROR) {
222 /* If this operation fails, we ignore it and report the original
223 * retval
224 */
225 target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR),
226 status & FLASH_ERROR);
227 }
228 return retval;
229 }
230
231 static int stm32x_unlock_reg(struct target *target)
232 {
233 uint32_t ctrl;
234
235 /* first check if not already unlocked
236 * otherwise writing on STM32_FLASH_KEYR will fail
237 */
238 int retval = target_read_u32(target, STM32_FLASH_CR, &ctrl);
239 if (retval != ERROR_OK)
240 return retval;
241
242 if ((ctrl & FLASH_LOCK) == 0)
243 return ERROR_OK;
244
245 /* unlock flash registers */
246 retval = target_write_u32(target, STM32_FLASH_KEYR, KEY1);
247 if (retval != ERROR_OK)
248 return retval;
249
250 retval = target_write_u32(target, STM32_FLASH_KEYR, KEY2);
251 if (retval != ERROR_OK)
252 return retval;
253
254 retval = target_read_u32(target, STM32_FLASH_CR, &ctrl);
255 if (retval != ERROR_OK)
256 return retval;
257
258 if (ctrl & FLASH_LOCK) {
259 LOG_ERROR("flash not unlocked STM32_FLASH_CR: %x", ctrl);
260 return ERROR_TARGET_FAILURE;
261 }
262
263 return ERROR_OK;
264 }
265
266 static int stm32x_unlock_option_reg(struct target *target)
267 {
268 uint32_t ctrl;
269
270 int retval = target_read_u32(target, STM32_FLASH_OPTCR, &ctrl);
271 if (retval != ERROR_OK)
272 return retval;
273
274 if ((ctrl & OPT_LOCK) == 0)
275 return ERROR_OK;
276
277 /* unlock option registers */
278 retval = target_write_u32(target, STM32_FLASH_OPTKEYR, OPTKEY1);
279 if (retval != ERROR_OK)
280 return retval;
281
282 retval = target_write_u32(target, STM32_FLASH_OPTKEYR, OPTKEY2);
283 if (retval != ERROR_OK)
284 return retval;
285
286 retval = target_read_u32(target, STM32_FLASH_OPTCR, &ctrl);
287 if (retval != ERROR_OK)
288 return retval;
289
290 if (ctrl & OPT_LOCK) {
291 LOG_ERROR("options not unlocked STM32_FLASH_OPTCR: %x", ctrl);
292 return ERROR_TARGET_FAILURE;
293 }
294
295 return ERROR_OK;
296 }
297
298 static int stm32x_read_options(struct flash_bank *bank)
299 {
300 uint32_t optiondata;
301 struct stm32x_flash_bank *stm32x_info = NULL;
302 struct target *target = bank->target;
303
304 stm32x_info = bank->driver_priv;
305
306 /* read current option bytes */
307 int retval = target_read_u32(target, STM32_FLASH_OPTCR, &optiondata);
308 if (retval != ERROR_OK)
309 return retval;
310
311 stm32x_info->option_bytes.user_options = optiondata & 0xec;
312 stm32x_info->option_bytes.RDP = (optiondata >> 8) & 0xff;
313 stm32x_info->option_bytes.protection = (optiondata >> 16) & 0xfff;
314
315 if (stm32x_info->has_large_mem) {
316
317 retval = target_read_u32(target, STM32_FLASH_OPTCR1, &optiondata);
318 if (retval != ERROR_OK)
319 return retval;
320
321 /* append protection bits */
322 stm32x_info->option_bytes.protection |= (optiondata >> 4) & 0x00fff000;
323 }
324
325 if (stm32x_info->option_bytes.RDP != 0xAA)
326 LOG_INFO("Device Security Bit Set");
327
328 return ERROR_OK;
329 }
330
331 static int stm32x_write_options(struct flash_bank *bank)
332 {
333 struct stm32x_flash_bank *stm32x_info = NULL;
334 struct target *target = bank->target;
335 uint32_t optiondata;
336
337 stm32x_info = bank->driver_priv;
338
339 int retval = stm32x_unlock_option_reg(target);
340 if (retval != ERROR_OK)
341 return retval;
342
343 /* rebuild option data */
344 optiondata = stm32x_info->option_bytes.user_options;
345 buf_set_u32(&optiondata, 8, 8, stm32x_info->option_bytes.RDP);
346 buf_set_u32(&optiondata, 16, 12, stm32x_info->option_bytes.protection);
347
348 /* program options */
349 retval = target_write_u32(target, STM32_FLASH_OPTCR, optiondata);
350 if (retval != ERROR_OK)
351 return retval;
352
353 if (stm32x_info->has_large_mem) {
354
355 uint32_t optiondata2 = 0;
356 buf_set_u32(&optiondata2, 16, 12, stm32x_info->option_bytes.protection >> 12);
357 retval = target_write_u32(target, STM32_FLASH_OPTCR1, optiondata2);
358 if (retval != ERROR_OK)
359 return retval;
360 }
361
362 /* start programming cycle */
363 retval = target_write_u32(target, STM32_FLASH_OPTCR, optiondata | OPT_START);
364 if (retval != ERROR_OK)
365 return retval;
366
367 /* wait for completion */
368 retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
369 if (retval != ERROR_OK)
370 return retval;
371
372 /* relock registers */
373 retval = target_write_u32(target, STM32_FLASH_OPTCR, OPT_LOCK);
374 if (retval != ERROR_OK)
375 return retval;
376
377 return ERROR_OK;
378 }
379
380 static int stm32x_protect_check(struct flash_bank *bank)
381 {
382 struct target *target = bank->target;
383 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
384
385 if (target->state != TARGET_HALTED) {
386 LOG_ERROR("Target not halted");
387 return ERROR_TARGET_NOT_HALTED;
388 }
389
390 /* read write protection settings */
391 int retval = stm32x_read_options(bank);
392 if (retval != ERROR_OK) {
393 LOG_DEBUG("unable to read option bytes");
394 return retval;
395 }
396
397 for (int i = 0; i < bank->num_sectors; i++) {
398 if (stm32x_info->option_bytes.protection & (1 << i))
399 bank->sectors[i].is_protected = 0;
400 else
401 bank->sectors[i].is_protected = 1;
402 }
403
404 return ERROR_OK;
405 }
406
407 static int stm32x_erase(struct flash_bank *bank, int first, int last)
408 {
409 struct target *target = bank->target;
410 int i;
411
412 if (bank->target->state != TARGET_HALTED) {
413 LOG_ERROR("Target not halted");
414 return ERROR_TARGET_NOT_HALTED;
415 }
416
417 int retval;
418 retval = stm32x_unlock_reg(target);
419 if (retval != ERROR_OK)
420 return retval;
421
422 /*
423 Sector Erase
424 To erase a sector, follow the procedure below:
425 1. Check that no Flash memory operation is ongoing by checking the BSY bit in the
426 FLASH_SR register
427 2. Set the SER bit and select the sector (out of the 12 sectors in the main memory block)
428 you wish to erase (SNB) in the FLASH_CR register
429 3. Set the STRT bit in the FLASH_CR register
430 4. Wait for the BSY bit to be cleared
431 */
432
433 for (i = first; i <= last; i++) {
434 retval = target_write_u32(target,
435 stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_SER | FLASH_SNB(i) | FLASH_STRT);
436 if (retval != ERROR_OK)
437 return retval;
438
439 retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
440 if (retval != ERROR_OK)
441 return retval;
442
443 bank->sectors[i].is_erased = 1;
444 }
445
446 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
447 if (retval != ERROR_OK)
448 return retval;
449
450 return ERROR_OK;
451 }
452
453 static int stm32x_protect(struct flash_bank *bank, int set, int first, int last)
454 {
455 struct target *target = bank->target;
456 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
457
458 if (target->state != TARGET_HALTED) {
459 LOG_ERROR("Target not halted");
460 return ERROR_TARGET_NOT_HALTED;
461 }
462
463 /* read protection settings */
464 int retval = stm32x_read_options(bank);
465 if (retval != ERROR_OK) {
466 LOG_DEBUG("unable to read option bytes");
467 return retval;
468 }
469
470 for (int i = first; i <= last; i++) {
471
472 if (set)
473 stm32x_info->option_bytes.protection &= ~(1 << i);
474 else
475 stm32x_info->option_bytes.protection |= (1 << i);
476 }
477
478 retval = stm32x_write_options(bank);
479 if (retval != ERROR_OK)
480 return retval;
481
482 return ERROR_OK;
483 }
484
485 static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
486 uint32_t offset, uint32_t count)
487 {
488 struct target *target = bank->target;
489 uint32_t buffer_size = 16384;
490 struct working_area *write_algorithm;
491 struct working_area *source;
492 uint32_t address = bank->base + offset;
493 struct reg_param reg_params[5];
494 struct armv7m_algorithm armv7m_info;
495 int retval = ERROR_OK;
496
497 /* see contrib/loaders/flash/stm32f2x.S for src */
498
499 static const uint8_t stm32x_flash_write_code[] = {
500 /* wait_fifo: */
501 0xD0, 0xF8, 0x00, 0x80, /* ldr r8, [r0, #0] */
502 0xB8, 0xF1, 0x00, 0x0F, /* cmp r8, #0 */
503 0x1A, 0xD0, /* beq exit */
504 0x47, 0x68, /* ldr r7, [r0, #4] */
505 0x47, 0x45, /* cmp r7, r8 */
506 0xF7, 0xD0, /* beq wait_fifo */
507
508 0xDF, 0xF8, 0x30, 0x60, /* ldr r6, STM32_PROG16 */
509 0x26, 0x61, /* str r6, [r4, #STM32_FLASH_CR_OFFSET] */
510 0x37, 0xF8, 0x02, 0x6B, /* ldrh r6, [r7], #0x02 */
511 0x22, 0xF8, 0x02, 0x6B, /* strh r6, [r2], #0x02 */
512 /* busy: */
513 0xE6, 0x68, /* ldr r6, [r4, #STM32_FLASH_SR_OFFSET] */
514 0x16, 0xF4, 0x80, 0x3F, /* tst r6, #0x10000 */
515 0xFB, 0xD1, /* bne busy */
516 0x16, 0xF0, 0xF0, 0x0F, /* tst r6, #0xf0 */
517 0x07, 0xD1, /* bne error */
518
519 0x8F, 0x42, /* cmp r7, r1 */
520 0x28, 0xBF, /* it cs */
521 0x00, 0xF1, 0x08, 0x07, /* addcs r7, r0, #8 */
522 0x47, 0x60, /* str r7, [r0, #4] */
523 0x01, 0x3B, /* subs r3, r3, #1 */
524 0x13, 0xB1, /* cbz r3, exit */
525 0xE1, 0xE7, /* b wait_fifo */
526 /* error: */
527 0x00, 0x21, /* movs r1, #0 */
528 0x41, 0x60, /* str r1, [r0, #4] */
529 /* exit: */
530 0x30, 0x46, /* mov r0, r6 */
531 0x00, 0xBE, /* bkpt #0x00 */
532
533 /* <STM32_PROG16>: */
534 0x01, 0x01, 0x00, 0x00, /* .word 0x00000101 */
535 };
536
537 if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code),
538 &write_algorithm) != ERROR_OK) {
539 LOG_WARNING("no working area available, can't do block memory writes");
540 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
541 };
542
543 retval = target_write_buffer(target, write_algorithm->address,
544 sizeof(stm32x_flash_write_code),
545 (uint8_t *)stm32x_flash_write_code);
546 if (retval != ERROR_OK)
547 return retval;
548
549 /* memory buffer */
550 while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
551 buffer_size /= 2;
552 if (buffer_size <= 256) {
553 /* we already allocated the writing code, but failed to get a
554 * buffer, free the algorithm */
555 target_free_working_area(target, write_algorithm);
556
557 LOG_WARNING("no large enough working area available, can't do block memory writes");
558 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
559 }
560 };
561
562 armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
563 armv7m_info.core_mode = ARM_MODE_THREAD;
564
565 init_reg_param(&reg_params[0], "r0", 32, PARAM_IN_OUT); /* buffer start, status (out) */
566 init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT); /* buffer end */
567 init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT); /* target address */
568 init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT); /* count (halfword-16bit) */
569 init_reg_param(&reg_params[4], "r4", 32, PARAM_OUT); /* flash base */
570
571 buf_set_u32(reg_params[0].value, 0, 32, source->address);
572 buf_set_u32(reg_params[1].value, 0, 32, source->address + source->size);
573 buf_set_u32(reg_params[2].value, 0, 32, address);
574 buf_set_u32(reg_params[3].value, 0, 32, count);
575 buf_set_u32(reg_params[4].value, 0, 32, STM32_FLASH_BASE);
576
577 retval = target_run_flash_async_algorithm(target, buffer, count, 2,
578 0, NULL,
579 5, reg_params,
580 source->address, source->size,
581 write_algorithm->address, 0,
582 &armv7m_info);
583
584 if (retval == ERROR_FLASH_OPERATION_FAILED) {
585 LOG_ERROR("error executing stm32x flash write algorithm");
586
587 uint32_t error = buf_get_u32(reg_params[0].value, 0, 32) & FLASH_ERROR;
588
589 if (error & FLASH_WRPERR)
590 LOG_ERROR("flash memory write protected");
591
592 if (error != 0) {
593 LOG_ERROR("flash write failed = %08x", error);
594 /* Clear but report errors */
595 target_write_u32(target, STM32_FLASH_SR, error);
596 retval = ERROR_FAIL;
597 }
598 }
599
600 target_free_working_area(target, source);
601 target_free_working_area(target, write_algorithm);
602
603 destroy_reg_param(&reg_params[0]);
604 destroy_reg_param(&reg_params[1]);
605 destroy_reg_param(&reg_params[2]);
606 destroy_reg_param(&reg_params[3]);
607 destroy_reg_param(&reg_params[4]);
608
609 return retval;
610 }
611
612 static int stm32x_write(struct flash_bank *bank, uint8_t *buffer,
613 uint32_t offset, uint32_t count)
614 {
615 struct target *target = bank->target;
616 uint32_t words_remaining = (count / 2);
617 uint32_t bytes_remaining = (count & 0x00000001);
618 uint32_t address = bank->base + offset;
619 uint32_t bytes_written = 0;
620 int retval;
621
622 if (bank->target->state != TARGET_HALTED) {
623 LOG_ERROR("Target not halted");
624 return ERROR_TARGET_NOT_HALTED;
625 }
626
627 if (offset & 0x1) {
628 LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
629 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
630 }
631
632 retval = stm32x_unlock_reg(target);
633 if (retval != ERROR_OK)
634 return retval;
635
636 /* multiple half words (2-byte) to be programmed? */
637 if (words_remaining > 0) {
638 /* try using a block write */
639 retval = stm32x_write_block(bank, buffer, offset, words_remaining);
640 if (retval != ERROR_OK) {
641 if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
642 /* if block write failed (no sufficient working area),
643 * we use normal (slow) single dword accesses */
644 LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
645 }
646 } else {
647 buffer += words_remaining * 2;
648 address += words_remaining * 2;
649 words_remaining = 0;
650 }
651 }
652
653 if ((retval != ERROR_OK) && (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE))
654 return retval;
655
656 /*
657 Standard programming
658 The Flash memory programming sequence is as follows:
659 1. Check that no main Flash memory operation is ongoing by checking the BSY bit in the
660 FLASH_SR register.
661 2. Set the PG bit in the FLASH_CR register
662 3. Perform the data write operation(s) to the desired memory address (inside main
663 memory block or OTP area):
664 – – Half-word access in case of x16 parallelism
665 – Word access in case of x32 parallelism
666 –
667 4.
668 Byte access in case of x8 parallelism
669 Double word access in case of x64 parallelism
670 Wait for the BSY bit to be cleared
671 */
672 while (words_remaining > 0) {
673 uint16_t value;
674 memcpy(&value, buffer + bytes_written, sizeof(uint16_t));
675
676 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR),
677 FLASH_PG | FLASH_PSIZE_16);
678 if (retval != ERROR_OK)
679 return retval;
680
681 retval = target_write_u16(target, address, value);
682 if (retval != ERROR_OK)
683 return retval;
684
685 retval = stm32x_wait_status_busy(bank, FLASH_WRITE_TIMEOUT);
686 if (retval != ERROR_OK)
687 return retval;
688
689 bytes_written += 2;
690 words_remaining--;
691 address += 2;
692 }
693
694 if (bytes_remaining) {
695 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR),
696 FLASH_PG | FLASH_PSIZE_8);
697 if (retval != ERROR_OK)
698 return retval;
699 retval = target_write_u8(target, address, buffer[bytes_written]);
700 if (retval != ERROR_OK)
701 return retval;
702
703 retval = stm32x_wait_status_busy(bank, FLASH_WRITE_TIMEOUT);
704 if (retval != ERROR_OK)
705 return retval;
706 }
707
708 return target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
709 }
710
711 static void setup_sector(struct flash_bank *bank, int start, int num, int size)
712 {
713 for (int i = start; i < (start + num) ; i++) {
714 bank->sectors[i].offset = bank->size;
715 bank->sectors[i].size = size;
716 bank->size += bank->sectors[i].size;
717 }
718 }
719
720 static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id)
721 {
722 /* this checks for a stm32f4x errata issue where a
723 * stm32f2x DBGMCU_IDCODE is incorrectly returned.
724 * If the issue is detected target is forced to stm32f4x Rev A.
725 * Only effects Rev A silicon */
726
727 struct target *target = bank->target;
728 uint32_t cpuid;
729
730 /* read stm32 device id register */
731 int retval = target_read_u32(target, 0xE0042000, device_id);
732 if (retval != ERROR_OK)
733 return retval;
734
735 if ((*device_id & 0xfff) == 0x411) {
736 /* read CPUID reg to check core type */
737 retval = target_read_u32(target, 0xE000ED00, &cpuid);
738 if (retval != ERROR_OK)
739 return retval;
740
741 /* check for cortex_m4 */
742 if (((cpuid >> 4) & 0xFFF) == 0xC24) {
743 *device_id &= ~((0xFFFF << 16) | 0xfff);
744 *device_id |= (0x1000 << 16) | 0x413;
745 LOG_INFO("stm32f4x errata detected - fixing incorrect MCU_IDCODE");
746 }
747 }
748 return retval;
749 }
750
751 static int stm32x_probe(struct flash_bank *bank)
752 {
753 struct target *target = bank->target;
754 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
755 int i;
756 uint16_t flash_size_in_kb;
757 uint16_t max_flash_size_in_kb;
758 uint32_t device_id;
759 uint32_t base_address = 0x08000000;
760
761 stm32x_info->probed = 0;
762 stm32x_info->has_large_mem = false;
763
764 /* read stm32 device id register */
765 int retval = stm32x_get_device_id(bank, &device_id);
766 if (retval != ERROR_OK)
767 return retval;
768 LOG_INFO("device id = 0x%08" PRIx32 "", device_id);
769
770 /* set max flash size depending on family */
771 switch (device_id & 0xfff) {
772 case 0x411:
773 case 0x413:
774 max_flash_size_in_kb = 1024;
775 break;
776 case 0x419:
777 max_flash_size_in_kb = 2048;
778 stm32x_info->has_large_mem = true;
779 break;
780 default:
781 LOG_WARNING("Cannot identify target as a STM32 family.");
782 return ERROR_FAIL;
783 }
784
785 /* get flash size from target. */
786 retval = target_read_u16(target, 0x1FFF7A22, &flash_size_in_kb);
787
788 /* failed reading flash size or flash size invalid (early silicon),
789 * default to max target family */
790 if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) {
791 LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
792 max_flash_size_in_kb);
793 flash_size_in_kb = max_flash_size_in_kb;
794 }
795
796 /* if the user sets the size manually then ignore the probed value
797 * this allows us to work around devices that have a invalid flash size register value */
798 if (stm32x_info->user_bank_size) {
799 LOG_INFO("ignoring flash probed value, using configured bank size");
800 flash_size_in_kb = stm32x_info->user_bank_size / 1024;
801 }
802
803 LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
804
805 /* did we assign flash size? */
806 assert(flash_size_in_kb != 0xffff);
807
808 /* calculate numbers of pages */
809 int num_pages = (flash_size_in_kb / 128) + 4;
810
811 /* check for larger 2048 bytes devices */
812 if (stm32x_info->has_large_mem)
813 num_pages += 4;
814
815 /* check that calculation result makes sense */
816 assert(num_pages > 0);
817
818 if (bank->sectors) {
819 free(bank->sectors);
820 bank->sectors = NULL;
821 }
822
823 bank->base = base_address;
824 bank->num_sectors = num_pages;
825 bank->sectors = malloc(sizeof(struct flash_sector) * num_pages);
826 bank->size = 0;
827
828 /* fixed memory */
829 setup_sector(bank, 0, 4, 16 * 1024);
830 setup_sector(bank, 4, 1, 64 * 1024);
831
832 /* dynamic memory */
833 setup_sector(bank, 4 + 1, MAX(12, num_pages) - 5, 128 * 1024);
834
835 if (stm32x_info->has_large_mem) {
836
837 /* fixed memory for larger devices */
838 setup_sector(bank, 12, 4, 16 * 1024);
839 setup_sector(bank, 16, 1, 64 * 1024);
840
841 /* dynamic memory for larger devices */
842 setup_sector(bank, 16 + 1, num_pages - 5 - 12, 128 * 1024);
843 }
844
845 for (i = 0; i < num_pages; i++) {
846 bank->sectors[i].is_erased = -1;
847 bank->sectors[i].is_protected = 0;
848 }
849
850 stm32x_info->probed = 1;
851
852 return ERROR_OK;
853 }
854
855 static int stm32x_auto_probe(struct flash_bank *bank)
856 {
857 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
858 if (stm32x_info->probed)
859 return ERROR_OK;
860 return stm32x_probe(bank);
861 }
862
863 static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
864 {
865 uint32_t device_id;
866 int printed;
867
868 /* read stm32 device id register */
869 int retval = stm32x_get_device_id(bank, &device_id);
870 if (retval != ERROR_OK)
871 return retval;
872
873 if ((device_id & 0xfff) == 0x411) {
874 printed = snprintf(buf, buf_size, "stm32f2x - Rev: ");
875 buf += printed;
876 buf_size -= printed;
877
878 switch (device_id >> 16) {
879 case 0x1000:
880 snprintf(buf, buf_size, "A");
881 break;
882
883 case 0x2000:
884 snprintf(buf, buf_size, "B");
885 break;
886
887 case 0x1001:
888 snprintf(buf, buf_size, "Z");
889 break;
890
891 case 0x2001:
892 snprintf(buf, buf_size, "Y");
893 break;
894
895 case 0x2003:
896 snprintf(buf, buf_size, "X");
897 break;
898
899 default:
900 snprintf(buf, buf_size, "unknown");
901 break;
902 }
903 } else if (((device_id & 0xfff) == 0x413) ||
904 ((device_id & 0xfff) == 0x419)) {
905 printed = snprintf(buf, buf_size, "stm32f4x - Rev: ");
906 buf += printed;
907 buf_size -= printed;
908
909 switch (device_id >> 16) {
910 case 0x1000:
911 snprintf(buf, buf_size, "A");
912 break;
913
914 case 0x1001:
915 snprintf(buf, buf_size, "Z");
916 break;
917
918 default:
919 snprintf(buf, buf_size, "unknown");
920 break;
921 }
922 } else {
923 snprintf(buf, buf_size, "Cannot identify target as a stm32x\n");
924 return ERROR_FAIL;
925 }
926
927 return ERROR_OK;
928 }
929
930 COMMAND_HANDLER(stm32x_handle_lock_command)
931 {
932 struct target *target = NULL;
933 struct stm32x_flash_bank *stm32x_info = NULL;
934
935 if (CMD_ARGC < 1)
936 return ERROR_COMMAND_SYNTAX_ERROR;
937
938 struct flash_bank *bank;
939 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
940 if (ERROR_OK != retval)
941 return retval;
942
943 stm32x_info = bank->driver_priv;
944 target = bank->target;
945
946 if (target->state != TARGET_HALTED) {
947 LOG_ERROR("Target not halted");
948 return ERROR_TARGET_NOT_HALTED;
949 }
950
951 if (stm32x_read_options(bank) != ERROR_OK) {
952 command_print(CMD_CTX, "%s failed to read options", bank->driver->name);
953 return ERROR_OK;
954 }
955
956 /* set readout protection */
957 stm32x_info->option_bytes.RDP = 0;
958
959 if (stm32x_write_options(bank) != ERROR_OK) {
960 command_print(CMD_CTX, "%s failed to lock device", bank->driver->name);
961 return ERROR_OK;
962 }
963
964 command_print(CMD_CTX, "%s locked", bank->driver->name);
965
966 return ERROR_OK;
967 }
968
969 COMMAND_HANDLER(stm32x_handle_unlock_command)
970 {
971 struct target *target = NULL;
972 struct stm32x_flash_bank *stm32x_info = NULL;
973
974 if (CMD_ARGC < 1)
975 return ERROR_COMMAND_SYNTAX_ERROR;
976
977 struct flash_bank *bank;
978 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
979 if (ERROR_OK != retval)
980 return retval;
981
982 stm32x_info = bank->driver_priv;
983 target = bank->target;
984
985 if (target->state != TARGET_HALTED) {
986 LOG_ERROR("Target not halted");
987 return ERROR_TARGET_NOT_HALTED;
988 }
989
990 if (stm32x_read_options(bank) != ERROR_OK) {
991 command_print(CMD_CTX, "%s failed to read options", bank->driver->name);
992 return ERROR_OK;
993 }
994
995 /* clear readout protection and complementary option bytes
996 * this will also force a device unlock if set */
997 stm32x_info->option_bytes.RDP = 0xAA;
998
999 if (stm32x_write_options(bank) != ERROR_OK) {
1000 command_print(CMD_CTX, "%s failed to unlock device", bank->driver->name);
1001 return ERROR_OK;
1002 }
1003
1004 command_print(CMD_CTX, "%s unlocked.\n"
1005 "INFO: a reset or power cycle is required "
1006 "for the new settings to take effect.", bank->driver->name);
1007
1008 return ERROR_OK;
1009 }
1010
1011 static int stm32x_mass_erase(struct flash_bank *bank)
1012 {
1013 int retval;
1014 struct target *target = bank->target;
1015 struct stm32x_flash_bank *stm32x_info = NULL;
1016
1017 if (target->state != TARGET_HALTED) {
1018 LOG_ERROR("Target not halted");
1019 return ERROR_TARGET_NOT_HALTED;
1020 }
1021
1022 stm32x_info = bank->driver_priv;
1023
1024 retval = stm32x_unlock_reg(target);
1025 if (retval != ERROR_OK)
1026 return retval;
1027
1028 /* mass erase flash memory */
1029 if (stm32x_info->has_large_mem)
1030 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER | FLASH_MER1);
1031 else
1032 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER);
1033 if (retval != ERROR_OK)
1034 return retval;
1035 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR),
1036 FLASH_MER | FLASH_STRT);
1037 if (retval != ERROR_OK)
1038 return retval;
1039
1040 retval = stm32x_wait_status_busy(bank, 30000);
1041 if (retval != ERROR_OK)
1042 return retval;
1043
1044 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
1045 if (retval != ERROR_OK)
1046 return retval;
1047
1048 return ERROR_OK;
1049 }
1050
1051 COMMAND_HANDLER(stm32x_handle_mass_erase_command)
1052 {
1053 int i;
1054
1055 if (CMD_ARGC < 1) {
1056 command_print(CMD_CTX, "stm32x mass_erase <bank>");
1057 return ERROR_COMMAND_SYNTAX_ERROR;
1058 }
1059
1060 struct flash_bank *bank;
1061 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1062 if (ERROR_OK != retval)
1063 return retval;
1064
1065 retval = stm32x_mass_erase(bank);
1066 if (retval == ERROR_OK) {
1067 /* set all sectors as erased */
1068 for (i = 0; i < bank->num_sectors; i++)
1069 bank->sectors[i].is_erased = 1;
1070
1071 command_print(CMD_CTX, "stm32x mass erase complete");
1072 } else {
1073 command_print(CMD_CTX, "stm32x mass erase failed");
1074 }
1075
1076 return retval;
1077 }
1078
1079 static const struct command_registration stm32x_exec_command_handlers[] = {
1080 {
1081 .name = "lock",
1082 .handler = stm32x_handle_lock_command,
1083 .mode = COMMAND_EXEC,
1084 .usage = "bank_id",
1085 .help = "Lock entire flash device.",
1086 },
1087 {
1088 .name = "unlock",
1089 .handler = stm32x_handle_unlock_command,
1090 .mode = COMMAND_EXEC,
1091 .usage = "bank_id",
1092 .help = "Unlock entire protected flash device.",
1093 },
1094 {
1095 .name = "mass_erase",
1096 .handler = stm32x_handle_mass_erase_command,
1097 .mode = COMMAND_EXEC,
1098 .usage = "bank_id",
1099 .help = "Erase entire flash device.",
1100 },
1101 COMMAND_REGISTRATION_DONE
1102 };
1103
1104 static const struct command_registration stm32x_command_handlers[] = {
1105 {
1106 .name = "stm32f2x",
1107 .mode = COMMAND_ANY,
1108 .help = "stm32f2x flash command group",
1109 .usage = "",
1110 .chain = stm32x_exec_command_handlers,
1111 },
1112 COMMAND_REGISTRATION_DONE
1113 };
1114
1115 struct flash_driver stm32f2x_flash = {
1116 .name = "stm32f2x",
1117 .commands = stm32x_command_handlers,
1118 .flash_bank_command = stm32x_flash_bank_command,
1119 .erase = stm32x_erase,
1120 .protect = stm32x_protect,
1121 .write = stm32x_write,
1122 .read = default_flash_read,
1123 .probe = stm32x_probe,
1124 .auto_probe = stm32x_auto_probe,
1125 .erase_check = default_flash_blank_check,
1126 .protect_check = stm32x_protect_check,
1127 .info = get_stm32x_info,
1128 };
Official OpenOCD Mirror