kernel/2.6.29.6-aldebaran-rt/drivers/usb/wusbcore/rh.c

   1 /*
   2  * Wireless USB Host Controller
   3  * Root Hub operations
   4  *
   5  *
   6  * Copyright (C) 2005-2006 Intel Corporation
   7  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License version
  11  * 2 as published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  21  * 02110-1301, USA.
  22  *
  23  *
  24  * We fake a root hub that has fake ports (as many as simultaneous
  25  * devices the Wireless USB Host Controller can deal with). For each
  26  * port we keep an state in @wusbhc->port[index] identical to the one
  27  * specified in the USB2.0[ch11] spec and some extra device
  28  * information that complements the one in 'struct usb_device' (as
  29  * this lacs a hcpriv pointer).
  30  *
  31  * Note this is common to WHCI and HWA host controllers.
  32  *
  33  * Through here we enable most of the state changes that the USB stack
  34  * will use to connect or disconnect devices. We need to do some
  35  * forced adaptation of Wireless USB device states vs. wired:
  36  *
  37  *        USB:                 WUSB:
  38  *
  39  * Port   Powered-off          port slot n/a
  40  *        Powered-on           port slot available
  41  *        Disconnected         port slot available
  42  *        Connected            port slot assigned device
  43  *                             device sent DN_Connect
  44  *                             device was authenticated
  45  *        Enabled              device is authenticated, transitioned
  46  *                             from unauth -> auth -> default address
  47  *                             -> enabled
  48  *        Reset                disconnect
  49  *        Disable              disconnect
  50  *
  51  * This maps the standard USB port states with the WUSB device states
  52  * so we can fake ports without having to modify the USB stack.
  53  *
  54  * FIXME: this process will change in the future
  55  *
  56  *
  57  * ENTRY POINTS
  58  *
  59  * Our entry points into here are, as in hcd.c, the USB stack root hub
  60  * ops defined in the usb_hcd struct:
  61  *
  62  * wusbhc_rh_status_data()      Provide hub and port status data bitmap
  63  *
  64  * wusbhc_rh_control()          Execution of all the major requests
  65  *                              you can do to a hub (Set|Clear
  66  *                              features, get descriptors, status, etc).
  67  *
  68  * wusbhc_rh_[suspend|resume]() That
  69  *
  70  * wusbhc_rh_start_port_reset() ??? unimplemented
  71  */
  72 #include "wusbhc.h"
  73
  74 /*
  75  * Reset a fake port
  76  *
  77  * Using a Reset Device IE is too heavyweight as it causes the device
  78  * to enter the UnConnected state and leave the cluster, this can mean
  79  * that when the device reconnects it is connected to a different fake
  80  * port.
  81  *
  82  * Instead, reset authenticated devices with a SetAddress(0), followed
  83  * by a SetAddresss(AuthAddr).
  84  *
  85  * For unauthenticated devices just pretend to reset but do nothing.
  86  * If the device initialization continues to fail it will eventually
  87  * time out after TrustTimeout and enter the UnConnected state.
  88  *
  89  * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
  90  *
  91  * Supposedly we are the only thread accesing @wusbhc->port; in any
  92  * case, maybe we should move the mutex locking from
  93  * wusbhc_devconnect_auth() to here.
  94  *
  95  * @port_idx refers to the wusbhc's port index, not the USB port number
  96  */
  97 static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
  98 {
  99         int result = 0;
 100         struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
 101         struct wusb_dev *wusb_dev = port->wusb_dev;
 102
 103         if (wusb_dev == NULL)
 104                 return -ENOTCONN;
 105
 106         port->status |= USB_PORT_STAT_RESET;
 107         port->change |= USB_PORT_STAT_C_RESET;
 108
 109         if (wusb_dev->addr & WUSB_DEV_ADDR_UNAUTH)
 110                 result = 0;
 111         else
 112                 result = wusb_dev_update_address(wusbhc, wusb_dev);
 113
 114         port->status &= ~USB_PORT_STAT_RESET;
 115         port->status |= USB_PORT_STAT_ENABLE;
 116         port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE;
 117
 118         return result;
 119 }
 120
 121 /*
 122  * Return the hub change status bitmap
 123  *
 124  * The bits in the change status bitmap are cleared when a
 125  * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4].
 126  *
 127  * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
 128  *
 129  * WARNING!! This gets called from atomic context; we cannot get the
 130  *           mutex--the only race condition we can find is some bit
 131  *           changing just after we copy it, which shouldn't be too
 132  *           big of a problem [and we can't make it an spinlock
 133  *           because other parts need to take it and sleep] .
 134  *
 135  *           @usb_hcd is refcounted, so it won't dissapear under us
 136  *           and before killing a host, the polling of the root hub
 137  *           would be stopped anyway.
 138  */
 139 int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf)
 140 {
 141         struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
 142         size_t cnt, size;
 143         unsigned long *buf = (unsigned long *) _buf;
 144
 145         /* WE DON'T LOCK, see comment */
 146         size = wusbhc->ports_max + 1 /* hub bit */;
 147         size = (size + 8 - 1) / 8;      /* round to bytes */
 148         for (cnt = 0; cnt < wusbhc->ports_max; cnt++)
 149                 if (wusb_port_by_idx(wusbhc, cnt)->change)
 150                         set_bit(cnt + 1, buf);
 151                 else
 152                         clear_bit(cnt + 1, buf);
 153         return size;
 154 }
 155 EXPORT_SYMBOL_GPL(wusbhc_rh_status_data);
 156
 157 /*
 158  * Return the hub's desciptor
 159  *
 160  * NOTE: almost cut and paste from ehci-hub.c
 161  *
 162  * @wusbhc is assumed referenced and @wusbhc->mutex unlocked
 163  */
 164 static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue,
 165                                    u16 wIndex,
 166                                    struct usb_hub_descriptor *descr,
 167                                    u16 wLength)
 168 {
 169         u16 temp = 1 + (wusbhc->ports_max / 8);
 170         u8 length = 7 + 2 * temp;
 171
 172         if (wLength < length)
 173                 return -ENOSPC;
 174         descr->bDescLength = 7 + 2 * temp;
 175         descr->bDescriptorType = 0x29;  /* HUB type */
 176         descr->bNbrPorts = wusbhc->ports_max;
 177         descr->wHubCharacteristics = cpu_to_le16(
 178                 0x00                    /* All ports power at once */
 179                 | 0x00                  /* not part of compound device */
 180                 | 0x10                  /* No overcurrent protection */
 181                 | 0x00                  /* 8 FS think time FIXME ?? */
 182                 | 0x00);                /* No port indicators */
 183         descr->bPwrOn2PwrGood = 0;
 184         descr->bHubContrCurrent = 0;
 185         /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 186         memset(&descr->bitmap[0], 0, temp);
 187         memset(&descr->bitmap[temp], 0xff, temp);
 188         return 0;
 189 }
 190
 191 /*
 192  * Clear a hub feature
 193  *
 194  * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
 195  *
 196  * Nothing to do, so no locking needed ;)
 197  */
 198 static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature)
 199 {
 200         int result;
 201
 202         switch (feature) {
 203         case C_HUB_LOCAL_POWER:
 204                 /* FIXME: maybe plug bit 0 to the power input status,
 205                  * if any?
 206                  * see wusbhc_rh_get_hub_status() */
 207         case C_HUB_OVER_CURRENT:
 208                 result = 0;
 209                 break;
 210         default:
 211                 result = -EPIPE;
 212         }
 213         return result;
 214 }
 215
 216 /*
 217  * Return hub status (it is always zero...)
 218  *
 219  * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
 220  *
 221  * Nothing to do, so no locking needed ;)
 222  */
 223 static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf,
 224                                     u16 wLength)
 225 {
 226         /* FIXME: maybe plug bit 0 to the power input status (if any)? */
 227         *buf = 0;
 228         return 0;
 229 }
 230
 231 /*
 232  * Set a port feature
 233  *
 234  * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
 235  */
 236 static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature,
 237                                    u8 selector, u8 port_idx)
 238 {
 239         struct device *dev = wusbhc->dev;
 240
 241         if (port_idx > wusbhc->ports_max)
 242                 return -EINVAL;
 243
 244         switch (feature) {
 245                 /* According to USB2.0[11.24.2.13]p2, these features
 246                  * are not required to be implemented. */
 247         case USB_PORT_FEAT_C_OVER_CURRENT:
 248         case USB_PORT_FEAT_C_ENABLE:
 249         case USB_PORT_FEAT_C_SUSPEND:
 250         case USB_PORT_FEAT_C_CONNECTION:
 251         case USB_PORT_FEAT_C_RESET:
 252                 return 0;
 253         case USB_PORT_FEAT_POWER:
 254                 /* No such thing, but we fake it works */
 255                 mutex_lock(&wusbhc->mutex);
 256                 wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER;
 257                 mutex_unlock(&wusbhc->mutex);
 258                 return 0;
 259         case USB_PORT_FEAT_RESET:
 260                 return wusbhc_rh_port_reset(wusbhc, port_idx);
 261         case USB_PORT_FEAT_ENABLE:
 262         case USB_PORT_FEAT_SUSPEND:
 263                 dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n",
 264                         port_idx, feature, selector);
 265                 return -ENOSYS;
 266         default:
 267                 dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n",
 268                         port_idx, feature, selector);
 269                 return -EPIPE;
 270         }
 271
 272         return 0;
 273 }
 274
 275 /*
 276  * Clear a port feature...
 277  *
 278  * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
 279  */
 280 static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature,
 281                                      u8 selector, u8 port_idx)
 282 {
 283         int result = 0;
 284         struct device *dev = wusbhc->dev;
 285
 286         if (port_idx > wusbhc->ports_max)
 287                 return -EINVAL;
 288
 289         mutex_lock(&wusbhc->mutex);
 290         switch (feature) {
 291         case USB_PORT_FEAT_POWER:       /* fake port always on */
 292                 /* According to USB2.0[11.24.2.7.1.4], no need to implement? */
 293         case USB_PORT_FEAT_C_OVER_CURRENT:
 294                 break;
 295         case USB_PORT_FEAT_C_RESET:
 296                 wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET;
 297                 break;
 298         case USB_PORT_FEAT_C_CONNECTION:
 299                 wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION;
 300                 break;
 301         case USB_PORT_FEAT_ENABLE:
 302                 __wusbhc_dev_disable(wusbhc, port_idx);
 303                 break;
 304         case USB_PORT_FEAT_C_ENABLE:
 305                 wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE;
 306                 break;
 307         case USB_PORT_FEAT_SUSPEND:
 308         case USB_PORT_FEAT_C_SUSPEND:
 309                 dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n",
 310                         port_idx, feature, selector);
 311                 result = -ENOSYS;
 312                 break;
 313         default:
 314                 dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n",
 315                         port_idx, feature, selector);
 316                 result = -EPIPE;
 317                 break;
 318         }
 319         mutex_unlock(&wusbhc->mutex);
 320
 321         return result;
 322 }
 323
 324 /*
 325  * Return the port's status
 326  *
 327  * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
 328  */
 329 static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx,
 330                                      u32 *_buf, u16 wLength)
 331 {
 332         __le16 *buf = (__le16 *)_buf;
 333
 334         if (port_idx > wusbhc->ports_max)
 335                 return -EINVAL;
 336
 337         mutex_lock(&wusbhc->mutex);
 338         buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status);
 339         buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change);
 340         mutex_unlock(&wusbhc->mutex);
 341
 342         return 0;
 343 }
 344
 345 /*
 346  * Entry point for Root Hub operations
 347  *
 348  * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
 349  */
 350 int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue,
 351                       u16 wIndex, char *buf, u16 wLength)
 352 {
 353         int result = -ENOSYS;
 354         struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
 355
 356         switch (reqntype) {
 357         case GetHubDescriptor:
 358                 result = wusbhc_rh_get_hub_descr(
 359                         wusbhc, wValue, wIndex,
 360                         (struct usb_hub_descriptor *) buf, wLength);
 361                 break;
 362         case ClearHubFeature:
 363                 result = wusbhc_rh_clear_hub_feat(wusbhc, wValue);
 364                 break;
 365         case GetHubStatus:
 366                 result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength);
 367                 break;
 368
 369         case SetPortFeature:
 370                 result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8,
 371                                                  (wIndex & 0xff) - 1);
 372                 break;
 373         case ClearPortFeature:
 374                 result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8,
 375                                                    (wIndex & 0xff) - 1);
 376                 break;
 377         case GetPortStatus:
 378                 result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1,
 379                                                    (u32 *)buf, wLength);
 380                 break;
 381
 382         case SetHubFeature:
 383         default:
 384                 dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) "
 385                         "UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype,
 386                         wValue, wIndex, buf, wLength);
 387                 /* dump_stack(); */
 388                 result = -ENOSYS;
 389         }
 390         return result;
 391 }
 392 EXPORT_SYMBOL_GPL(wusbhc_rh_control);
 393
 394 int wusbhc_rh_suspend(struct usb_hcd *usb_hcd)
 395 {
 396         struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
 397         dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
 398                 usb_hcd, wusbhc);
 399         /* dump_stack(); */
 400         return -ENOSYS;
 401 }
 402 EXPORT_SYMBOL_GPL(wusbhc_rh_suspend);
 403
 404 int wusbhc_rh_resume(struct usb_hcd *usb_hcd)
 405 {
 406         struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
 407         dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
 408                 usb_hcd, wusbhc);
 409         /* dump_stack(); */
 410         return -ENOSYS;
 411 }
 412 EXPORT_SYMBOL_GPL(wusbhc_rh_resume);
 413
 414 int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx)
 415 {
 416         struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
 417         dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n",
 418                 __func__, usb_hcd, wusbhc, port_idx);
 419         WARN_ON(1);
 420         return -ENOSYS;
 421 }
 422 EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset);
 423
 424 static void wusb_port_init(struct wusb_port *port)
 425 {
 426         port->status |= USB_PORT_STAT_HIGH_SPEED;
 427 }
 428
 429 /*
 430  * Alloc fake port specific fields and status.
 431  */
 432 int wusbhc_rh_create(struct wusbhc *wusbhc)
 433 {
 434         int result = -ENOMEM;
 435         size_t port_size, itr;
 436         port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]);
 437         wusbhc->port = kzalloc(port_size, GFP_KERNEL);
 438         if (wusbhc->port == NULL)
 439                 goto error_port_alloc;
 440         for (itr = 0; itr < wusbhc->ports_max; itr++)
 441                 wusb_port_init(&wusbhc->port[itr]);
 442         result = 0;
 443 error_port_alloc:
 444         return result;
 445 }
 446
 447 void wusbhc_rh_destroy(struct wusbhc *wusbhc)
 448 {
 449         kfree(wusbhc->port);
 450 }