?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
added 2.6.29.6 aldebaran kernel
[nao-ulib.git] / kernel / 2.6.29.6-aldebaran-rt / drivers / char / synclink_gt.c
blobf329f459817cb41bb4cb1ffb0c2ac6b08278ea3c
1 /*
2 * Device driver for Microgate SyncLink GT serial adapters.
3 *
4 * written by Paul Fulghum for Microgate Corporation
5 * paulkf@microgate.com
6 *
7 * Microgate and SyncLink are trademarks of Microgate Corporation
8 *
9 * This code is released under the GNU General Public License (GPL)
10 *
11 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
12 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
13 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
14 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
15 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
16 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
17 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
18 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
19 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
20 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
21 * OF THE POSSIBILITY OF SUCH DAMAGE.
22 */
23
24 /*
25 * DEBUG OUTPUT DEFINITIONS
26 *
27 * uncomment lines below to enable specific types of debug output
28 *
29 * DBGINFO information - most verbose output
30 * DBGERR serious errors
31 * DBGBH bottom half service routine debugging
32 * DBGISR interrupt service routine debugging
33 * DBGDATA output receive and transmit data
34 * DBGTBUF output transmit DMA buffers and registers
35 * DBGRBUF output receive DMA buffers and registers
36 */
37
38 #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
39 #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
40 #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
41 #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
42 #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
43 //#define DBGTBUF(info) dump_tbufs(info)
44 //#define DBGRBUF(info) dump_rbufs(info)
45
46
47 #include <linux/module.h>
48 #include <linux/errno.h>
49 #include <linux/signal.h>
50 #include <linux/sched.h>
51 #include <linux/timer.h>
52 #include <linux/interrupt.h>
53 #include <linux/pci.h>
54 #include <linux/tty.h>
55 #include <linux/tty_flip.h>
56 #include <linux/serial.h>
57 #include <linux/major.h>
58 #include <linux/string.h>
59 #include <linux/fcntl.h>
60 #include <linux/ptrace.h>
61 #include <linux/ioport.h>
62 #include <linux/mm.h>
63 #include <linux/slab.h>
64 #include <linux/netdevice.h>
65 #include <linux/vmalloc.h>
66 #include <linux/init.h>
67 #include <linux/delay.h>
68 #include <linux/ioctl.h>
69 #include <linux/termios.h>
70 #include <linux/bitops.h>
71 #include <linux/workqueue.h>
72 #include <linux/hdlc.h>
73 #include <linux/synclink.h>
74
75 #include <asm/system.h>
76 #include <asm/io.h>
77 #include <asm/irq.h>
78 #include <asm/dma.h>
79 #include <asm/types.h>
80 #include <asm/uaccess.h>
81
82 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
83 #define SYNCLINK_GENERIC_HDLC 1
84 #else
85 #define SYNCLINK_GENERIC_HDLC 0
86 #endif
87
88 /*
89 * module identification
90 */
91 static char *driver_name = "SyncLink GT";
92 static char *tty_driver_name = "synclink_gt";
93 static char *tty_dev_prefix = "ttySLG";
94 MODULE_LICENSE("GPL");
95 #define MGSL_MAGIC 0x5401
96 #define MAX_DEVICES 32
97
98 static struct pci_device_id pci_table[] = {
99 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
100 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
101 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
102 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
103 {0,}, /* terminate list */
104 };
105 MODULE_DEVICE_TABLE(pci, pci_table);
106
107 static int init_one(struct pci_dev *dev,const struct pci_device_id *ent);
108 static void remove_one(struct pci_dev *dev);
109 static struct pci_driver pci_driver = {
110 .name = "synclink_gt",
111 .id_table = pci_table,
112 .probe = init_one,
113 .remove = __devexit_p(remove_one),
114 };
115
116 static bool pci_registered;
117
118 /*
119 * module configuration and status
120 */
121 static struct slgt_info *slgt_device_list;
122 static int slgt_device_count;
123
124 static int ttymajor;
125 static int debug_level;
126 static int maxframe[MAX_DEVICES];
127
128 module_param(ttymajor, int, 0);
129 module_param(debug_level, int, 0);
130 module_param_array(maxframe, int, NULL, 0);
131
132 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
133 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
134 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
135
136 /*
137 * tty support and callbacks
138 */
139 static struct tty_driver *serial_driver;
140
141 static int open(struct tty_struct *tty, struct file * filp);
142 static void close(struct tty_struct *tty, struct file * filp);
143 static void hangup(struct tty_struct *tty);
144 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
145
146 static int write(struct tty_struct *tty, const unsigned char *buf, int count);
147 static int put_char(struct tty_struct *tty, unsigned char ch);
148 static void send_xchar(struct tty_struct *tty, char ch);
149 static void wait_until_sent(struct tty_struct *tty, int timeout);
150 static int write_room(struct tty_struct *tty);
151 static void flush_chars(struct tty_struct *tty);
152 static void flush_buffer(struct tty_struct *tty);
153 static void tx_hold(struct tty_struct *tty);
154 static void tx_release(struct tty_struct *tty);
155
156 static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
157 static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
158 static int chars_in_buffer(struct tty_struct *tty);
159 static void throttle(struct tty_struct * tty);
160 static void unthrottle(struct tty_struct * tty);
161 static int set_break(struct tty_struct *tty, int break_state);
162
163 /*
164 * generic HDLC support and callbacks
165 */
166 #if SYNCLINK_GENERIC_HDLC
167 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
168 static void hdlcdev_tx_done(struct slgt_info *info);
169 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
170 static int hdlcdev_init(struct slgt_info *info);
171 static void hdlcdev_exit(struct slgt_info *info);
172 #endif
173
174
175 /*
176 * device specific structures, macros and functions
177 */
178
179 #define SLGT_MAX_PORTS 4
180 #define SLGT_REG_SIZE 256
181
182 /*
183 * conditional wait facility
184 */
185 struct cond_wait {
186 struct cond_wait *next;
187 wait_queue_head_t q;
188 wait_queue_t wait;
189 unsigned int data;
190 };
191 static void init_cond_wait(struct cond_wait *w, unsigned int data);
192 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
193 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
194 static void flush_cond_wait(struct cond_wait **head);
195
196 /*
197 * DMA buffer descriptor and access macros
198 */
199 struct slgt_desc
200 {
201 __le16 count;
202 __le16 status;
203 __le32 pbuf; /* physical address of data buffer */
204 __le32 next; /* physical address of next descriptor */
205
206 /* driver book keeping */
207 char *buf; /* virtual address of data buffer */
208 unsigned int pdesc; /* physical address of this descriptor */
209 dma_addr_t buf_dma_addr;
210 unsigned short buf_count;
211 };
212
213 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
214 #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b))
215 #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b))
216 #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
217 #define desc_count(a) (le16_to_cpu((a).count))
218 #define desc_status(a) (le16_to_cpu((a).status))
219 #define desc_complete(a) (le16_to_cpu((a).status) & BIT15)
220 #define desc_eof(a) (le16_to_cpu((a).status) & BIT2)
221 #define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1)
222 #define desc_abort(a) (le16_to_cpu((a).status) & BIT0)
223 #define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3)
224
225 struct _input_signal_events {
226 int ri_up;
227 int ri_down;
228 int dsr_up;
229 int dsr_down;
230 int dcd_up;
231 int dcd_down;
232 int cts_up;
233 int cts_down;
234 };
235
236 /*
237 * device instance data structure
238 */
239 struct slgt_info {
240 void *if_ptr; /* General purpose pointer (used by SPPP) */
241 struct tty_port port;
242
243 struct slgt_info *next_device; /* device list link */
244
245 int magic;
246
247 char device_name[25];
248 struct pci_dev *pdev;
249
250 int port_count; /* count of ports on adapter */
251 int adapter_num; /* adapter instance number */
252 int port_num; /* port instance number */
253
254 /* array of pointers to port contexts on this adapter */
255 struct slgt_info *port_array[SLGT_MAX_PORTS];
256
257 int line; /* tty line instance number */
258
259 struct mgsl_icount icount;
260
261 int timeout;
262 int x_char; /* xon/xoff character */
263 unsigned int read_status_mask;
264 unsigned int ignore_status_mask;
265
266 wait_queue_head_t status_event_wait_q;
267 wait_queue_head_t event_wait_q;
268 struct timer_list tx_timer;
269 struct timer_list rx_timer;
270
271 unsigned int gpio_present;
272 struct cond_wait *gpio_wait_q;
273
274 spinlock_t lock; /* spinlock for synchronizing with ISR */
275
276 struct work_struct task;
277 u32 pending_bh;
278 bool bh_requested;
279 bool bh_running;
280
281 int isr_overflow;
282 bool irq_requested; /* true if IRQ requested */
283 bool irq_occurred; /* for diagnostics use */
284
285 /* device configuration */
286
287 unsigned int bus_type;
288 unsigned int irq_level;
289 unsigned long irq_flags;
290
291 unsigned char __iomem * reg_addr; /* memory mapped registers address */
292 u32 phys_reg_addr;
293 bool reg_addr_requested;
294
295 MGSL_PARAMS params; /* communications parameters */
296 u32 idle_mode;
297 u32 max_frame_size; /* as set by device config */
298
299 unsigned int rbuf_fill_level;
300 unsigned int if_mode;
301
302 /* device status */
303
304 bool rx_enabled;
305 bool rx_restart;
306
307 bool tx_enabled;
308 bool tx_active;
309
310 unsigned char signals; /* serial signal states */
311 int init_error; /* initialization error */
312
313 unsigned char *tx_buf;
314 int tx_count;
315
316 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
317 char char_buf[MAX_ASYNC_BUFFER_SIZE];
318 bool drop_rts_on_tx_done;
319 struct _input_signal_events input_signal_events;
320
321 int dcd_chkcount; /* check counts to prevent */
322 int cts_chkcount; /* too many IRQs if a signal */
323 int dsr_chkcount; /* is floating */
324 int ri_chkcount;
325
326 char *bufs; /* virtual address of DMA buffer lists */
327 dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
328
329 unsigned int rbuf_count;
330 struct slgt_desc *rbufs;
331 unsigned int rbuf_current;
332 unsigned int rbuf_index;
333
334 unsigned int tbuf_count;
335 struct slgt_desc *tbufs;
336 unsigned int tbuf_current;
337 unsigned int tbuf_start;
338
339 unsigned char *tmp_rbuf;
340 unsigned int tmp_rbuf_count;
341
342 /* SPPP/Cisco HDLC device parts */
343
344 int netcount;
345 spinlock_t netlock;
346 #if SYNCLINK_GENERIC_HDLC
347 struct net_device *netdev;
348 #endif
349
350 };
351
352 static MGSL_PARAMS default_params = {
353 .mode = MGSL_MODE_HDLC,
354 .loopback = 0,
355 .flags = HDLC_FLAG_UNDERRUN_ABORT15,
356 .encoding = HDLC_ENCODING_NRZI_SPACE,
357 .clock_speed = 0,
358 .addr_filter = 0xff,
359 .crc_type = HDLC_CRC_16_CCITT,
360 .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
361 .preamble = HDLC_PREAMBLE_PATTERN_NONE,
362 .data_rate = 9600,
363 .data_bits = 8,
364 .stop_bits = 1,
365 .parity = ASYNC_PARITY_NONE
366 };
367
368
369 #define BH_RECEIVE 1
370 #define BH_TRANSMIT 2
371 #define BH_STATUS 4
372 #define IO_PIN_SHUTDOWN_LIMIT 100
373
374 #define DMABUFSIZE 256
375 #define DESC_LIST_SIZE 4096
376
377 #define MASK_PARITY BIT1
378 #define MASK_FRAMING BIT0
379 #define MASK_BREAK BIT14
380 #define MASK_OVERRUN BIT4
381
382 #define GSR 0x00 /* global status */
383 #define JCR 0x04 /* JTAG control */
384 #define IODR 0x08 /* GPIO direction */
385 #define IOER 0x0c /* GPIO interrupt enable */
386 #define IOVR 0x10 /* GPIO value */
387 #define IOSR 0x14 /* GPIO interrupt status */
388 #define TDR 0x80 /* tx data */
389 #define RDR 0x80 /* rx data */
390 #define TCR 0x82 /* tx control */
391 #define TIR 0x84 /* tx idle */
392 #define TPR 0x85 /* tx preamble */
393 #define RCR 0x86 /* rx control */
394 #define VCR 0x88 /* V.24 control */
395 #define CCR 0x89 /* clock control */
396 #define BDR 0x8a /* baud divisor */
397 #define SCR 0x8c /* serial control */
398 #define SSR 0x8e /* serial status */
399 #define RDCSR 0x90 /* rx DMA control/status */
400 #define TDCSR 0x94 /* tx DMA control/status */
401 #define RDDAR 0x98 /* rx DMA descriptor address */
402 #define TDDAR 0x9c /* tx DMA descriptor address */
403
404 #define RXIDLE BIT14
405 #define RXBREAK BIT14
406 #define IRQ_TXDATA BIT13
407 #define IRQ_TXIDLE BIT12
408 #define IRQ_TXUNDER BIT11 /* HDLC */
409 #define IRQ_RXDATA BIT10
410 #define IRQ_RXIDLE BIT9 /* HDLC */
411 #define IRQ_RXBREAK BIT9 /* async */
412 #define IRQ_RXOVER BIT8
413 #define IRQ_DSR BIT7
414 #define IRQ_CTS BIT6
415 #define IRQ_DCD BIT5
416 #define IRQ_RI BIT4
417 #define IRQ_ALL 0x3ff0
418 #define IRQ_MASTER BIT0
419
420 #define slgt_irq_on(info, mask) \
421 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
422 #define slgt_irq_off(info, mask) \
423 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
424
425 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr);
426 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
427 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
428 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
429 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
430 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
431
432 static void msc_set_vcr(struct slgt_info *info);
433
434 static int startup(struct slgt_info *info);
435 static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
436 static void shutdown(struct slgt_info *info);
437 static void program_hw(struct slgt_info *info);
438 static void change_params(struct slgt_info *info);
439
440 static int register_test(struct slgt_info *info);
441 static int irq_test(struct slgt_info *info);
442 static int loopback_test(struct slgt_info *info);
443 static int adapter_test(struct slgt_info *info);
444
445 static void reset_adapter(struct slgt_info *info);
446 static void reset_port(struct slgt_info *info);
447 static void async_mode(struct slgt_info *info);
448 static void sync_mode(struct slgt_info *info);
449
450 static void rx_stop(struct slgt_info *info);
451 static void rx_start(struct slgt_info *info);
452 static void reset_rbufs(struct slgt_info *info);
453 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
454 static void rdma_reset(struct slgt_info *info);
455 static bool rx_get_frame(struct slgt_info *info);
456 static bool rx_get_buf(struct slgt_info *info);
457
458 static void tx_start(struct slgt_info *info);
459 static void tx_stop(struct slgt_info *info);
460 static void tx_set_idle(struct slgt_info *info);
461 static unsigned int free_tbuf_count(struct slgt_info *info);
462 static unsigned int tbuf_bytes(struct slgt_info *info);
463 static void reset_tbufs(struct slgt_info *info);
464 static void tdma_reset(struct slgt_info *info);
465 static void tdma_start(struct slgt_info *info);
466 static void tx_load(struct slgt_info *info, const char *buf, unsigned int count);
467
468 static void get_signals(struct slgt_info *info);
469 static void set_signals(struct slgt_info *info);
470 static void enable_loopback(struct slgt_info *info);
471 static void set_rate(struct slgt_info *info, u32 data_rate);
472
473 static int bh_action(struct slgt_info *info);
474 static void bh_handler(struct work_struct *work);
475 static void bh_transmit(struct slgt_info *info);
476 static void isr_serial(struct slgt_info *info);
477 static void isr_rdma(struct slgt_info *info);
478 static void isr_txeom(struct slgt_info *info, unsigned short status);
479 static void isr_tdma(struct slgt_info *info);
480
481 static int alloc_dma_bufs(struct slgt_info *info);
482 static void free_dma_bufs(struct slgt_info *info);
483 static int alloc_desc(struct slgt_info *info);
484 static void free_desc(struct slgt_info *info);
485 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
486 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
487
488 static int alloc_tmp_rbuf(struct slgt_info *info);
489 static void free_tmp_rbuf(struct slgt_info *info);
490
491 static void tx_timeout(unsigned long context);
492 static void rx_timeout(unsigned long context);
493
494 /*
495 * ioctl handlers
496 */
497 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
498 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
499 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
500 static int get_txidle(struct slgt_info *info, int __user *idle_mode);
501 static int set_txidle(struct slgt_info *info, int idle_mode);
502 static int tx_enable(struct slgt_info *info, int enable);
503 static int tx_abort(struct slgt_info *info);
504 static int rx_enable(struct slgt_info *info, int enable);
505 static int modem_input_wait(struct slgt_info *info,int arg);
506 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
507 static int tiocmget(struct tty_struct *tty, struct file *file);
508 static int tiocmset(struct tty_struct *tty, struct file *file,
509 unsigned int set, unsigned int clear);
510 static int set_break(struct tty_struct *tty, int break_state);
511 static int get_interface(struct slgt_info *info, int __user *if_mode);
512 static int set_interface(struct slgt_info *info, int if_mode);
513 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
514 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
515 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
516
517 /*
518 * driver functions
519 */
520 static void add_device(struct slgt_info *info);
521 static void device_init(int adapter_num, struct pci_dev *pdev);
522 static int claim_resources(struct slgt_info *info);
523 static void release_resources(struct slgt_info *info);
524
525 /*
526 * DEBUG OUTPUT CODE
527 */
528 #ifndef DBGINFO
529 #define DBGINFO(fmt)
530 #endif
531 #ifndef DBGERR
532 #define DBGERR(fmt)
533 #endif
534 #ifndef DBGBH
535 #define DBGBH(fmt)
536 #endif
537 #ifndef DBGISR
538 #define DBGISR(fmt)
539 #endif
540
541 #ifdef DBGDATA
542 static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
543 {
544 int i;
545 int linecount;
546 printk("%s %s data:\n",info->device_name, label);
547 while(count) {
548 linecount = (count > 16) ? 16 : count;
549 for(i=0; i < linecount; i++)
550 printk("%02X ",(unsigned char)data[i]);
551 for(;i<17;i++)
552 printk(" ");
553 for(i=0;i<linecount;i++) {
554 if (data[i]>=040 && data[i]<=0176)
555 printk("%c",data[i]);
556 else
557 printk(".");
558 }
559 printk("\n");
560 data += linecount;
561 count -= linecount;
562 }
563 }
564 #else
565 #define DBGDATA(info, buf, size, label)
566 #endif
567
568 #ifdef DBGTBUF
569 static void dump_tbufs(struct slgt_info *info)
570 {
571 int i;
572 printk("tbuf_current=%d\n", info->tbuf_current);
573 for (i=0 ; i < info->tbuf_count ; i++) {
574 printk("%d: count=%04X status=%04X\n",
575 i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
576 }
577 }
578 #else
579 #define DBGTBUF(info)
580 #endif
581
582 #ifdef DBGRBUF
583 static void dump_rbufs(struct slgt_info *info)
584 {
585 int i;
586 printk("rbuf_current=%d\n", info->rbuf_current);
587 for (i=0 ; i < info->rbuf_count ; i++) {
588 printk("%d: count=%04X status=%04X\n",
589 i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
590 }
591 }
592 #else
593 #define DBGRBUF(info)
594 #endif
595
596 static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
597 {
598 #ifdef SANITY_CHECK
599 if (!info) {
600 printk("null struct slgt_info for (%s) in %s\n", devname, name);
601 return 1;
602 }
603 if (info->magic != MGSL_MAGIC) {
604 printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
605 return 1;
606 }
607 #else
608 if (!info)
609 return 1;
610 #endif
611 return 0;
612 }
613
614 /**
615 * line discipline callback wrappers
616 *
617 * The wrappers maintain line discipline references
618 * while calling into the line discipline.
619 *
620 * ldisc_receive_buf - pass receive data to line discipline
621 */
622 static void ldisc_receive_buf(struct tty_struct *tty,
623 const __u8 *data, char *flags, int count)
624 {
625 struct tty_ldisc *ld;
626 if (!tty)
627 return;
628 ld = tty_ldisc_ref(tty);
629 if (ld) {
630 if (ld->ops->receive_buf)
631 ld->ops->receive_buf(tty, data, flags, count);
632 tty_ldisc_deref(ld);
633 }
634 }
635
636 /* tty callbacks */
637
638 static int open(struct tty_struct *tty, struct file *filp)
639 {
640 struct slgt_info *info;
641 int retval, line;
642 unsigned long flags;
643
644 line = tty->index;
645 if ((line < 0) || (line >= slgt_device_count)) {
646 DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
647 return -ENODEV;
648 }
649
650 info = slgt_device_list;
651 while(info && info->line != line)
652 info = info->next_device;
653 if (sanity_check(info, tty->name, "open"))
654 return -ENODEV;
655 if (info->init_error) {
656 DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
657 return -ENODEV;
658 }
659
660 tty->driver_data = info;
661 info->port.tty = tty;
662
663 DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
664
665 /* If port is closing, signal caller to try again */
666 if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
667 if (info->port.flags & ASYNC_CLOSING)
668 interruptible_sleep_on(&info->port.close_wait);
669 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
670 -EAGAIN : -ERESTARTSYS);
671 goto cleanup;
672 }
673
674 info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
675
676 spin_lock_irqsave(&info->netlock, flags);
677 if (info->netcount) {
678 retval = -EBUSY;
679 spin_unlock_irqrestore(&info->netlock, flags);
680 goto cleanup;
681 }
682 info->port.count++;
683 spin_unlock_irqrestore(&info->netlock, flags);
684
685 if (info->port.count == 1) {
686 /* 1st open on this device, init hardware */
687 retval = startup(info);
688 if (retval < 0)
689 goto cleanup;
690 }
691
692 retval = block_til_ready(tty, filp, info);
693 if (retval) {
694 DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
695 goto cleanup;
696 }
697
698 retval = 0;
699
700 cleanup:
701 if (retval) {
702 if (tty->count == 1)
703 info->port.tty = NULL; /* tty layer will release tty struct */
704 if(info->port.count)
705 info->port.count--;
706 }
707
708 DBGINFO(("%s open rc=%d\n", info->device_name, retval));
709 return retval;
710 }
711
712 static void close(struct tty_struct *tty, struct file *filp)
713 {
714 struct slgt_info *info = tty->driver_data;
715
716 if (sanity_check(info, tty->name, "close"))
717 return;
718 DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count));
719
720 if (tty_port_close_start(&info->port, tty, filp) == 0)
721 goto cleanup;
722
723 if (info->port.flags & ASYNC_INITIALIZED)
724 wait_until_sent(tty, info->timeout);
725 flush_buffer(tty);
726 tty_ldisc_flush(tty);
727
728 shutdown(info);
729
730 tty_port_close_end(&info->port, tty);
731 info->port.tty = NULL;
732 cleanup:
733 DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count));
734 }
735
736 static void hangup(struct tty_struct *tty)
737 {
738 struct slgt_info *info = tty->driver_data;
739
740 if (sanity_check(info, tty->name, "hangup"))
741 return;
742 DBGINFO(("%s hangup\n", info->device_name));
743
744 flush_buffer(tty);
745 shutdown(info);
746
747 info->port.count = 0;
748 info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
749 info->port.tty = NULL;
750
751 wake_up_interruptible(&info->port.open_wait);
752 }
753
754 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
755 {
756 struct slgt_info *info = tty->driver_data;
757 unsigned long flags;
758
759 DBGINFO(("%s set_termios\n", tty->driver->name));
760
761 change_params(info);
762
763 /* Handle transition to B0 status */
764 if (old_termios->c_cflag & CBAUD &&
765 !(tty->termios->c_cflag & CBAUD)) {
766 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
767 spin_lock_irqsave(&info->lock,flags);
768 set_signals(info);
769 spin_unlock_irqrestore(&info->lock,flags);
770 }
771
772 /* Handle transition away from B0 status */
773 if (!(old_termios->c_cflag & CBAUD) &&
774 tty->termios->c_cflag & CBAUD) {
775 info->signals |= SerialSignal_DTR;
776 if (!(tty->termios->c_cflag & CRTSCTS) ||
777 !test_bit(TTY_THROTTLED, &tty->flags)) {
778 info->signals |= SerialSignal_RTS;
779 }
780 spin_lock_irqsave(&info->lock,flags);
781 set_signals(info);
782 spin_unlock_irqrestore(&info->lock,flags);
783 }
784
785 /* Handle turning off CRTSCTS */
786 if (old_termios->c_cflag & CRTSCTS &&
787 !(tty->termios->c_cflag & CRTSCTS)) {
788 tty->hw_stopped = 0;
789 tx_release(tty);
790 }
791 }
792
793 static int write(struct tty_struct *tty,
794 const unsigned char *buf, int count)
795 {
796 int ret = 0;
797 struct slgt_info *info = tty->driver_data;
798 unsigned long flags;
799 unsigned int bufs_needed;
800
801 if (sanity_check(info, tty->name, "write"))
802 goto cleanup;
803 DBGINFO(("%s write count=%d\n", info->device_name, count));
804
805 if (!info->tx_buf)
806 goto cleanup;
807
808 if (count > info->max_frame_size) {
809 ret = -EIO;
810 goto cleanup;
811 }
812
813 if (!count)
814 goto cleanup;
815
816 if (!info->tx_active && info->tx_count) {
817 /* send accumulated data from send_char() */
818 tx_load(info, info->tx_buf, info->tx_count);
819 goto start;
820 }
821 bufs_needed = (count/DMABUFSIZE);
822 if (count % DMABUFSIZE)
823 ++bufs_needed;
824 if (bufs_needed > free_tbuf_count(info))
825 goto cleanup;
826
827 ret = info->tx_count = count;
828 tx_load(info, buf, count);
829 goto start;
830
831 start:
832 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
833 spin_lock_irqsave(&info->lock,flags);
834 if (!info->tx_active)
835 tx_start(info);
836 else
837 tdma_start(info);
838 spin_unlock_irqrestore(&info->lock,flags);
839 }
840
841 cleanup:
842 DBGINFO(("%s write rc=%d\n", info->device_name, ret));
843 return ret;
844 }
845
846 static int put_char(struct tty_struct *tty, unsigned char ch)
847 {
848 struct slgt_info *info = tty->driver_data;
849 unsigned long flags;
850 int ret = 0;
851
852 if (sanity_check(info, tty->name, "put_char"))
853 return 0;
854 DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
855 if (!info->tx_buf)
856 return 0;
857 spin_lock_irqsave(&info->lock,flags);
858 if (!info->tx_active && (info->tx_count < info->max_frame_size)) {
859 info->tx_buf[info->tx_count++] = ch;
860 ret = 1;
861 }
862 spin_unlock_irqrestore(&info->lock,flags);
863 return ret;
864 }
865
866 static void send_xchar(struct tty_struct *tty, char ch)
867 {
868 struct slgt_info *info = tty->driver_data;
869 unsigned long flags;
870
871 if (sanity_check(info, tty->name, "send_xchar"))
872 return;
873 DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
874 info->x_char = ch;
875 if (ch) {
876 spin_lock_irqsave(&info->lock,flags);
877 if (!info->tx_enabled)
878 tx_start(info);
879 spin_unlock_irqrestore(&info->lock,flags);
880 }
881 }
882
883 static void wait_until_sent(struct tty_struct *tty, int timeout)
884 {
885 struct slgt_info *info = tty->driver_data;
886 unsigned long orig_jiffies, char_time;
887
888 if (!info )
889 return;
890 if (sanity_check(info, tty->name, "wait_until_sent"))
891 return;
892 DBGINFO(("%s wait_until_sent entry\n", info->device_name));
893 if (!(info->port.flags & ASYNC_INITIALIZED))
894 goto exit;
895
896 orig_jiffies = jiffies;
897
898 /* Set check interval to 1/5 of estimated time to
899 * send a character, and make it at least 1. The check
900 * interval should also be less than the timeout.
901 * Note: use tight timings here to satisfy the NIST-PCTS.
902 */
903
904 lock_kernel();
905
906 if (info->params.data_rate) {
907 char_time = info->timeout/(32 * 5);
908 if (!char_time)
909 char_time++;
910 } else
911 char_time = 1;
912
913 if (timeout)
914 char_time = min_t(unsigned long, char_time, timeout);
915
916 while (info->tx_active) {
917 msleep_interruptible(jiffies_to_msecs(char_time));
918 if (signal_pending(current))
919 break;
920 if (timeout && time_after(jiffies, orig_jiffies + timeout))
921 break;
922 }
923 unlock_kernel();
924
925 exit:
926 DBGINFO(("%s wait_until_sent exit\n", info->device_name));
927 }
928
929 static int write_room(struct tty_struct *tty)
930 {
931 struct slgt_info *info = tty->driver_data;
932 int ret;
933
934 if (sanity_check(info, tty->name, "write_room"))
935 return 0;
936 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
937 DBGINFO(("%s write_room=%d\n", info->device_name, ret));
938 return ret;
939 }
940
941 static void flush_chars(struct tty_struct *tty)
942 {
943 struct slgt_info *info = tty->driver_data;
944 unsigned long flags;
945
946 if (sanity_check(info, tty->name, "flush_chars"))
947 return;
948 DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
949
950 if (info->tx_count <= 0 || tty->stopped ||
951 tty->hw_stopped || !info->tx_buf)
952 return;
953
954 DBGINFO(("%s flush_chars start transmit\n", info->device_name));
955
956 spin_lock_irqsave(&info->lock,flags);
957 if (!info->tx_active && info->tx_count) {
958 tx_load(info, info->tx_buf,info->tx_count);
959 tx_start(info);
960 }
961 spin_unlock_irqrestore(&info->lock,flags);
962 }
963
964 static void flush_buffer(struct tty_struct *tty)
965 {
966 struct slgt_info *info = tty->driver_data;
967 unsigned long flags;
968
969 if (sanity_check(info, tty->name, "flush_buffer"))
970 return;
971 DBGINFO(("%s flush_buffer\n", info->device_name));
972
973 spin_lock_irqsave(&info->lock,flags);
974 if (!info->tx_active)
975 info->tx_count = 0;
976 spin_unlock_irqrestore(&info->lock,flags);
977
978 tty_wakeup(tty);
979 }
980
981 /*
982 * throttle (stop) transmitter
983 */
984 static void tx_hold(struct tty_struct *tty)
985 {
986 struct slgt_info *info = tty->driver_data;
987 unsigned long flags;
988
989 if (sanity_check(info, tty->name, "tx_hold"))
990 return;
991 DBGINFO(("%s tx_hold\n", info->device_name));
992 spin_lock_irqsave(&info->lock,flags);
993 if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
994 tx_stop(info);
995 spin_unlock_irqrestore(&info->lock,flags);
996 }
997
998 /*
999 * release (start) transmitter
1000 */
1001 static void tx_release(struct tty_struct *tty)
1002 {
1003 struct slgt_info *info = tty->driver_data;
1004 unsigned long flags;
1005
1006 if (sanity_check(info, tty->name, "tx_release"))
1007 return;
1008 DBGINFO(("%s tx_release\n", info->device_name));
1009 spin_lock_irqsave(&info->lock,flags);
1010 if (!info->tx_active && info->tx_count) {
1011 tx_load(info, info->tx_buf, info->tx_count);
1012 tx_start(info);
1013 }
1014 spin_unlock_irqrestore(&info->lock,flags);
1015 }
1016
1017 /*
1018 * Service an IOCTL request
1019 *
1020 * Arguments
1021 *
1022 * tty pointer to tty instance data
1023 * file pointer to associated file object for device
1024 * cmd IOCTL command code
1025 * arg command argument/context
1026 *
1027 * Return 0 if success, otherwise error code
1028 */
1029 static int ioctl(struct tty_struct *tty, struct file *file,
1030 unsigned int cmd, unsigned long arg)
1031 {
1032 struct slgt_info *info = tty->driver_data;
1033 struct mgsl_icount cnow; /* kernel counter temps */
1034 struct serial_icounter_struct __user *p_cuser; /* user space */
1035 unsigned long flags;
1036 void __user *argp = (void __user *)arg;
1037 int ret;
1038
1039 if (sanity_check(info, tty->name, "ioctl"))
1040 return -ENODEV;
1041 DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
1042
1043 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1044 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1045 if (tty->flags & (1 << TTY_IO_ERROR))
1046 return -EIO;
1047 }
1048
1049 lock_kernel();
1050
1051 switch (cmd) {
1052 case MGSL_IOCGPARAMS:
1053 ret = get_params(info, argp);
1054 break;
1055 case MGSL_IOCSPARAMS:
1056 ret = set_params(info, argp);
1057 break;
1058 case MGSL_IOCGTXIDLE:
1059 ret = get_txidle(info, argp);
1060 break;
1061 case MGSL_IOCSTXIDLE:
1062 ret = set_txidle(info, (int)arg);
1063 break;
1064 case MGSL_IOCTXENABLE:
1065 ret = tx_enable(info, (int)arg);
1066 break;
1067 case MGSL_IOCRXENABLE:
1068 ret = rx_enable(info, (int)arg);
1069 break;
1070 case MGSL_IOCTXABORT:
1071 ret = tx_abort(info);
1072 break;
1073 case MGSL_IOCGSTATS:
1074 ret = get_stats(info, argp);
1075 break;
1076 case MGSL_IOCWAITEVENT:
1077 ret = wait_mgsl_event(info, argp);
1078 break;
1079 case TIOCMIWAIT:
1080 ret = modem_input_wait(info,(int)arg);
1081 break;
1082 case MGSL_IOCGIF:
1083 ret = get_interface(info, argp);
1084 break;
1085 case MGSL_IOCSIF:
1086 ret = set_interface(info,(int)arg);
1087 break;
1088 case MGSL_IOCSGPIO:
1089 ret = set_gpio(info, argp);
1090 break;
1091 case MGSL_IOCGGPIO:
1092 ret = get_gpio(info, argp);
1093 break;
1094 case MGSL_IOCWAITGPIO:
1095 ret = wait_gpio(info, argp);
1096 break;
1097 case TIOCGICOUNT:
1098 spin_lock_irqsave(&info->lock,flags);
1099 cnow = info->icount;
1100 spin_unlock_irqrestore(&info->lock,flags);
1101 p_cuser = argp;
1102 if (put_user(cnow.cts, &p_cuser->cts) ||
1103 put_user(cnow.dsr, &p_cuser->dsr) ||
1104 put_user(cnow.rng, &p_cuser->rng) ||
1105 put_user(cnow.dcd, &p_cuser->dcd) ||
1106 put_user(cnow.rx, &p_cuser->rx) ||
1107 put_user(cnow.tx, &p_cuser->tx) ||
1108 put_user(cnow.frame, &p_cuser->frame) ||
1109 put_user(cnow.overrun, &p_cuser->overrun) ||
1110 put_user(cnow.parity, &p_cuser->parity) ||
1111 put_user(cnow.brk, &p_cuser->brk) ||
1112 put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
1113 ret = -EFAULT;
1114 ret = 0;
1115 break;
1116 default:
1117 ret = -ENOIOCTLCMD;
1118 }
1119 unlock_kernel();
1120 return ret;
1121 }
1122
1123 /*
1124 * support for 32 bit ioctl calls on 64 bit systems
1125 */
1126 #ifdef CONFIG_COMPAT
1127 static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
1128 {
1129 struct MGSL_PARAMS32 tmp_params;
1130
1131 DBGINFO(("%s get_params32\n", info->device_name));
1132 tmp_params.mode = (compat_ulong_t)info->params.mode;
1133 tmp_params.loopback = info->params.loopback;
1134 tmp_params.flags = info->params.flags;
1135 tmp_params.encoding = info->params.encoding;
1136 tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed;
1137 tmp_params.addr_filter = info->params.addr_filter;
1138 tmp_params.crc_type = info->params.crc_type;
1139 tmp_params.preamble_length = info->params.preamble_length;
1140 tmp_params.preamble = info->params.preamble;
1141 tmp_params.data_rate = (compat_ulong_t)info->params.data_rate;
1142 tmp_params.data_bits = info->params.data_bits;
1143 tmp_params.stop_bits = info->params.stop_bits;
1144 tmp_params.parity = info->params.parity;
1145 if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
1146 return -EFAULT;
1147 return 0;
1148 }
1149
1150 static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
1151 {
1152 struct MGSL_PARAMS32 tmp_params;
1153
1154 DBGINFO(("%s set_params32\n", info->device_name));
1155 if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
1156 return -EFAULT;
1157
1158 spin_lock(&info->lock);
1159 info->params.mode = tmp_params.mode;
1160 info->params.loopback = tmp_params.loopback;
1161 info->params.flags = tmp_params.flags;
1162 info->params.encoding = tmp_params.encoding;
1163 info->params.clock_speed = tmp_params.clock_speed;
1164 info->params.addr_filter = tmp_params.addr_filter;
1165 info->params.crc_type = tmp_params.crc_type;
1166 info->params.preamble_length = tmp_params.preamble_length;
1167 info->params.preamble = tmp_params.preamble;
1168 info->params.data_rate = tmp_params.data_rate;
1169 info->params.data_bits = tmp_params.data_bits;
1170 info->params.stop_bits = tmp_params.stop_bits;
1171 info->params.parity = tmp_params.parity;
1172 spin_unlock(&info->lock);
1173
1174 change_params(info);
1175
1176 return 0;
1177 }
1178
1179 static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
1180 unsigned int cmd, unsigned long arg)
1181 {
1182 struct slgt_info *info = tty->driver_data;
1183 int rc = -ENOIOCTLCMD;
1184
1185 if (sanity_check(info, tty->name, "compat_ioctl"))
1186 return -ENODEV;
1187 DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
1188
1189 switch (cmd) {
1190
1191 case MGSL_IOCSPARAMS32:
1192 rc = set_params32(info, compat_ptr(arg));
1193 break;
1194
1195 case MGSL_IOCGPARAMS32:
1196 rc = get_params32(info, compat_ptr(arg));
1197 break;
1198
1199 case MGSL_IOCGPARAMS:
1200 case MGSL_IOCSPARAMS:
1201 case MGSL_IOCGTXIDLE:
1202 case MGSL_IOCGSTATS:
1203 case MGSL_IOCWAITEVENT:
1204 case MGSL_IOCGIF:
1205 case MGSL_IOCSGPIO:
1206 case MGSL_IOCGGPIO:
1207 case MGSL_IOCWAITGPIO:
1208 case TIOCGICOUNT:
1209 rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
1210 break;
1211
1212 case MGSL_IOCSTXIDLE:
1213 case MGSL_IOCTXENABLE:
1214 case MGSL_IOCRXENABLE:
1215 case MGSL_IOCTXABORT:
1216 case TIOCMIWAIT:
1217 case MGSL_IOCSIF:
1218 rc = ioctl(tty, file, cmd, arg);
1219 break;
1220 }
1221
1222 DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
1223 return rc;
1224 }
1225 #else
1226 #define slgt_compat_ioctl NULL
1227 #endif /* ifdef CONFIG_COMPAT */
1228
1229 /*
1230 * proc fs support
1231 */
1232 static inline int line_info(char *buf, struct slgt_info *info)
1233 {
1234 char stat_buf[30];
1235 int ret;
1236 unsigned long flags;
1237
1238 ret = sprintf(buf, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
1239 info->device_name, info->phys_reg_addr,
1240 info->irq_level, info->max_frame_size);
1241
1242 /* output current serial signal states */
1243 spin_lock_irqsave(&info->lock,flags);
1244 get_signals(info);
1245 spin_unlock_irqrestore(&info->lock,flags);
1246
1247 stat_buf[0] = 0;
1248 stat_buf[1] = 0;
1249 if (info->signals & SerialSignal_RTS)
1250 strcat(stat_buf, "|RTS");
1251 if (info->signals & SerialSignal_CTS)
1252 strcat(stat_buf, "|CTS");
1253 if (info->signals & SerialSignal_DTR)
1254 strcat(stat_buf, "|DTR");
1255 if (info->signals & SerialSignal_DSR)
1256 strcat(stat_buf, "|DSR");
1257 if (info->signals & SerialSignal_DCD)
1258 strcat(stat_buf, "|CD");
1259 if (info->signals & SerialSignal_RI)
1260 strcat(stat_buf, "|RI");
1261
1262 if (info->params.mode != MGSL_MODE_ASYNC) {
1263 ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
1264 info->icount.txok, info->icount.rxok);
1265 if (info->icount.txunder)
1266 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
1267 if (info->icount.txabort)
1268 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
1269 if (info->icount.rxshort)
1270 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
1271 if (info->icount.rxlong)
1272 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
1273 if (info->icount.rxover)
1274 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
1275 if (info->icount.rxcrc)
1276 ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
1277 } else {
1278 ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
1279 info->icount.tx, info->icount.rx);
1280 if (info->icount.frame)
1281 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
1282 if (info->icount.parity)
1283 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
1284 if (info->icount.brk)
1285 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
1286 if (info->icount.overrun)
1287 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
1288 }
1289
1290 /* Append serial signal status to end */
1291 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
1292
1293 ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1294 info->tx_active,info->bh_requested,info->bh_running,
1295 info->pending_bh);
1296
1297 return ret;
1298 }
1299
1300 /* Called to print information about devices
1301 */
1302 static int read_proc(char *page, char **start, off_t off, int count,
1303 int *eof, void *data)
1304 {
1305 int len = 0, l;
1306 off_t begin = 0;
1307 struct slgt_info *info;
1308
1309 len += sprintf(page, "synclink_gt driver\n");
1310
1311 info = slgt_device_list;
1312 while( info ) {
1313 l = line_info(page + len, info);
1314 len += l;
1315 if (len+begin > off+count)
1316 goto done;
1317 if (len+begin < off) {
1318 begin += len;
1319 len = 0;
1320 }
1321 info = info->next_device;
1322 }
1323
1324 *eof = 1;
1325 done:
1326 if (off >= len+begin)
1327 return 0;
1328 *start = page + (off-begin);
1329 return ((count < begin+len-off) ? count : begin+len-off);
1330 }
1331
1332 /*
1333 * return count of bytes in transmit buffer
1334 */
1335 static int chars_in_buffer(struct tty_struct *tty)
1336 {
1337 struct slgt_info *info = tty->driver_data;
1338 int count;
1339 if (sanity_check(info, tty->name, "chars_in_buffer"))
1340 return 0;
1341 count = tbuf_bytes(info);
1342 DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count));
1343 return count;
1344 }
1345
1346 /*
1347 * signal remote device to throttle send data (our receive data)
1348 */
1349 static void throttle(struct tty_struct * tty)
1350 {
1351 struct slgt_info *info = tty->driver_data;
1352 unsigned long flags;
1353
1354 if (sanity_check(info, tty->name, "throttle"))
1355 return;
1356 DBGINFO(("%s throttle\n", info->device_name));
1357 if (I_IXOFF(tty))
1358 send_xchar(tty, STOP_CHAR(tty));
1359 if (tty->termios->c_cflag & CRTSCTS) {
1360 spin_lock_irqsave(&info->lock,flags);
1361 info->signals &= ~SerialSignal_RTS;
1362 set_signals(info);
1363 spin_unlock_irqrestore(&info->lock,flags);
1364 }
1365 }
1366
1367 /*
1368 * signal remote device to stop throttling send data (our receive data)
1369 */
1370 static void unthrottle(struct tty_struct * tty)
1371 {
1372 struct slgt_info *info = tty->driver_data;
1373 unsigned long flags;
1374
1375 if (sanity_check(info, tty->name, "unthrottle"))
1376 return;
1377 DBGINFO(("%s unthrottle\n", info->device_name));
1378 if (I_IXOFF(tty)) {
1379 if (info->x_char)
1380 info->x_char = 0;
1381 else
1382 send_xchar(tty, START_CHAR(tty));
1383 }
1384 if (tty->termios->c_cflag & CRTSCTS) {
1385 spin_lock_irqsave(&info->lock,flags);
1386 info->signals |= SerialSignal_RTS;
1387 set_signals(info);
1388 spin_unlock_irqrestore(&info->lock,flags);
1389 }
1390 }
1391
1392 /*
1393 * set or clear transmit break condition
1394 * break_state -1=set break condition, 0=clear
1395 */
1396 static int set_break(struct tty_struct *tty, int break_state)
1397 {
1398 struct slgt_info *info = tty->driver_data;
1399 unsigned short value;
1400 unsigned long flags;
1401
1402 if (sanity_check(info, tty->name, "set_break"))
1403 return -EINVAL;
1404 DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
1405
1406 spin_lock_irqsave(&info->lock,flags);
1407 value = rd_reg16(info, TCR);
1408 if (break_state == -1)
1409 value |= BIT6;
1410 else
1411 value &= ~BIT6;
1412 wr_reg16(info, TCR, value);
1413 spin_unlock_irqrestore(&info->lock,flags);
1414 return 0;
1415 }
1416
1417 #if SYNCLINK_GENERIC_HDLC
1418
1419 /**
1420 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1421 * set encoding and frame check sequence (FCS) options
1422 *
1423 * dev pointer to network device structure
1424 * encoding serial encoding setting
1425 * parity FCS setting
1426 *
1427 * returns 0 if success, otherwise error code
1428 */
1429 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1430 unsigned short parity)
1431 {
1432 struct slgt_info *info = dev_to_port(dev);
1433 unsigned char new_encoding;
1434 unsigned short new_crctype;
1435
1436 /* return error if TTY interface open */
1437 if (info->port.count)
1438 return -EBUSY;
1439
1440 DBGINFO(("%s hdlcdev_attach\n", info->device_name));
1441
1442 switch (encoding)
1443 {
1444 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1445 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1446 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1447 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1448 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1449 default: return -EINVAL;
1450 }
1451
1452 switch (parity)
1453 {
1454 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1455 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1456 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1457 default: return -EINVAL;
1458 }
1459
1460 info->params.encoding = new_encoding;
1461 info->params.crc_type = new_crctype;
1462
1463 /* if network interface up, reprogram hardware */
1464 if (info->netcount)
1465 program_hw(info);
1466
1467 return 0;
1468 }
1469
1470 /**
1471 * called by generic HDLC layer to send frame
1472 *
1473 * skb socket buffer containing HDLC frame
1474 * dev pointer to network device structure
1475 *
1476 * returns 0 if success, otherwise error code
1477 */
1478 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1479 {
1480 struct slgt_info *info = dev_to_port(dev);
1481 unsigned long flags;
1482
1483 DBGINFO(("%s hdlc_xmit\n", dev->name));
1484
1485 /* stop sending until this frame completes */
1486 netif_stop_queue(dev);
1487
1488 /* copy data to device buffers */
1489 info->tx_count = skb->len;
1490 tx_load(info, skb->data, skb->len);
1491
1492 /* update network statistics */
1493 dev->stats.tx_packets++;
1494 dev->stats.tx_bytes += skb->len;
1495
1496 /* done with socket buffer, so free it */
1497 dev_kfree_skb(skb);
1498
1499 /* save start time for transmit timeout detection */
1500 dev->trans_start = jiffies;
1501
1502 /* start hardware transmitter if necessary */
1503 spin_lock_irqsave(&info->lock,flags);
1504 if (!info->tx_active)
1505 tx_start(info);
1506 spin_unlock_irqrestore(&info->lock,flags);
1507
1508 return 0;
1509 }
1510
1511 /**
1512 * called by network layer when interface enabled
1513 * claim resources and initialize hardware
1514 *
1515 * dev pointer to network device structure
1516 *
1517 * returns 0 if success, otherwise error code
1518 */
1519 static int hdlcdev_open(struct net_device *dev)
1520 {
1521 struct slgt_info *info = dev_to_port(dev);
1522 int rc;
1523 unsigned long flags;
1524
1525 if (!try_module_get(THIS_MODULE))
1526 return -EBUSY;
1527
1528 DBGINFO(("%s hdlcdev_open\n", dev->name));
1529
1530 /* generic HDLC layer open processing */
1531 if ((rc = hdlc_open(dev)))
1532 return rc;
1533
1534 /* arbitrate between network and tty opens */
1535 spin_lock_irqsave(&info->netlock, flags);
1536 if (info->port.count != 0 || info->netcount != 0) {
1537 DBGINFO(("%s hdlc_open busy\n", dev->name));
1538 spin_unlock_irqrestore(&info->netlock, flags);
1539 return -EBUSY;
1540 }
1541 info->netcount=1;
1542 spin_unlock_irqrestore(&info->netlock, flags);
1543
1544 /* claim resources and init adapter */
1545 if ((rc = startup(info)) != 0) {
1546 spin_lock_irqsave(&info->netlock, flags);
1547 info->netcount=0;
1548 spin_unlock_irqrestore(&info->netlock, flags);
1549 return rc;
1550 }
1551
1552 /* assert DTR and RTS, apply hardware settings */
1553 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
1554 program_hw(info);
1555
1556 /* enable network layer transmit */
1557 dev->trans_start = jiffies;
1558 netif_start_queue(dev);
1559
1560 /* inform generic HDLC layer of current DCD status */
1561 spin_lock_irqsave(&info->lock, flags);
1562 get_signals(info);
1563 spin_unlock_irqrestore(&info->lock, flags);
1564 if (info->signals & SerialSignal_DCD)
1565 netif_carrier_on(dev);
1566 else
1567 netif_carrier_off(dev);
1568 return 0;
1569 }
1570
1571 /**
1572 * called by network layer when interface is disabled
1573 * shutdown hardware and release resources
1574 *
1575 * dev pointer to network device structure
1576 *
1577 * returns 0 if success, otherwise error code
1578 */
1579 static int hdlcdev_close(struct net_device *dev)
1580 {
1581 struct slgt_info *info = dev_to_port(dev);
1582 unsigned long flags;
1583
1584 DBGINFO(("%s hdlcdev_close\n", dev->name));
1585
1586 netif_stop_queue(dev);
1587
1588 /* shutdown adapter and release resources */
1589 shutdown(info);
1590
1591 hdlc_close(dev);
1592
1593 spin_lock_irqsave(&info->netlock, flags);
1594 info->netcount=0;
1595 spin_unlock_irqrestore(&info->netlock, flags);
1596
1597 module_put(THIS_MODULE);
1598 return 0;
1599 }
1600
1601 /**
1602 * called by network layer to process IOCTL call to network device
1603 *
1604 * dev pointer to network device structure
1605 * ifr pointer to network interface request structure
1606 * cmd IOCTL command code
1607 *
1608 * returns 0 if success, otherwise error code
1609 */
1610 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1611 {
1612 const size_t size = sizeof(sync_serial_settings);
1613 sync_serial_settings new_line;
1614 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1615 struct slgt_info *info = dev_to_port(dev);
1616 unsigned int flags;
1617
1618 DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
1619
1620 /* return error if TTY interface open */
1621 if (info->port.count)
1622 return -EBUSY;
1623
1624 if (cmd != SIOCWANDEV)
1625 return hdlc_ioctl(dev, ifr, cmd);
1626
1627 switch(ifr->ifr_settings.type) {
1628 case IF_GET_IFACE: /* return current sync_serial_settings */
1629
1630 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1631 if (ifr->ifr_settings.size < size) {
1632 ifr->ifr_settings.size = size; /* data size wanted */
1633 return -ENOBUFS;
1634 }
1635
1636 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1637 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1638 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1639 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1640
1641 switch (flags){
1642 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1643 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1644 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1645 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1646 default: new_line.clock_type = CLOCK_DEFAULT;
1647 }
1648
1649 new_line.clock_rate = info->params.clock_speed;
1650 new_line.loopback = info->params.loopback ? 1:0;
1651
1652 if (copy_to_user(line, &new_line, size))
1653 return -EFAULT;
1654 return 0;
1655
1656 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1657
1658 if(!capable(CAP_NET_ADMIN))
1659 return -EPERM;
1660 if (copy_from_user(&new_line, line, size))
1661 return -EFAULT;
1662
1663 switch (new_line.clock_type)
1664 {
1665 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1666 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1667 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1668 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1669 case CLOCK_DEFAULT: flags = info->params.flags &
1670 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1671 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1672 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1673 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1674 default: return -EINVAL;
1675 }
1676
1677 if (new_line.loopback != 0 && new_line.loopback != 1)
1678 return -EINVAL;
1679
1680 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1681 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1682 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1683 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1684 info->params.flags |= flags;
1685
1686 info->params.loopback = new_line.loopback;
1687
1688 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1689 info->params.clock_speed = new_line.clock_rate;
1690 else
1691 info->params.clock_speed = 0;
1692
1693 /* if network interface up, reprogram hardware */
1694 if (info->netcount)
1695 program_hw(info);
1696 return 0;
1697
1698 default:
1699 return hdlc_ioctl(dev, ifr, cmd);
1700 }
1701 }
1702
1703 /**
1704 * called by network layer when transmit timeout is detected
1705 *
1706 * dev pointer to network device structure
1707 */
1708 static void hdlcdev_tx_timeout(struct net_device *dev)
1709 {
1710 struct slgt_info *info = dev_to_port(dev);
1711 unsigned long flags;
1712
1713 DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
1714
1715 dev->stats.tx_errors++;
1716 dev->stats.tx_aborted_errors++;
1717
1718 spin_lock_irqsave(&info->lock,flags);
1719 tx_stop(info);
1720 spin_unlock_irqrestore(&info->lock,flags);
1721
1722 netif_wake_queue(dev);
1723 }
1724
1725 /**
1726 * called by device driver when transmit completes
1727 * reenable network layer transmit if stopped
1728 *
1729 * info pointer to device instance information
1730 */
1731 static void hdlcdev_tx_done(struct slgt_info *info)
1732 {
1733 if (netif_queue_stopped(info->netdev))
1734 netif_wake_queue(info->netdev);
1735 }
1736
1737 /**
1738 * called by device driver when frame received
1739 * pass frame to network layer
1740 *
1741 * info pointer to device instance information
1742 * buf pointer to buffer contianing frame data
1743 * size count of data bytes in buf
1744 */
1745 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
1746 {
1747 struct sk_buff *skb = dev_alloc_skb(size);
1748 struct net_device *dev = info->netdev;
1749
1750 DBGINFO(("%s hdlcdev_rx\n", dev->name));
1751
1752 if (skb == NULL) {
1753 DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
1754 dev->stats.rx_dropped++;
1755 return;
1756 }
1757
1758 memcpy(skb_put(skb, size), buf, size);
1759
1760 skb->protocol = hdlc_type_trans(skb, dev);
1761
1762 dev->stats.rx_packets++;
1763 dev->stats.rx_bytes += size;
1764
1765 netif_rx(skb);
1766
1767 dev->last_rx = jiffies;
1768 }
1769
1770 /**
1771 * called by device driver when adding device instance
1772 * do generic HDLC initialization
1773 *
1774 * info pointer to device instance information
1775 *
1776 * returns 0 if success, otherwise error code
1777 */
1778 static int hdlcdev_init(struct slgt_info *info)
1779 {
1780 int rc;
1781 struct net_device *dev;
1782 hdlc_device *hdlc;
1783
1784 /* allocate and initialize network and HDLC layer objects */
1785
1786 if (!(dev = alloc_hdlcdev(info))) {
1787 printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
1788 return -ENOMEM;
1789 }
1790
1791 /* for network layer reporting purposes only */
1792 dev->mem_start = info->phys_reg_addr;
1793 dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1;
1794 dev->irq = info->irq_level;
1795
1796 /* network layer callbacks and settings */
1797 dev->do_ioctl = hdlcdev_ioctl;
1798 dev->open = hdlcdev_open;
1799 dev->stop = hdlcdev_close;
1800 dev->tx_timeout = hdlcdev_tx_timeout;
1801 dev->watchdog_timeo = 10*HZ;
1802 dev->tx_queue_len = 50;
1803
1804 /* generic HDLC layer callbacks and settings */
1805 hdlc = dev_to_hdlc(dev);
1806 hdlc->attach = hdlcdev_attach;
1807 hdlc->xmit = hdlcdev_xmit;
1808
1809 /* register objects with HDLC layer */
1810 if ((rc = register_hdlc_device(dev))) {
1811 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1812 free_netdev(dev);
1813 return rc;
1814 }
1815
1816 info->netdev = dev;
1817 return 0;
1818 }
1819
1820 /**
1821 * called by device driver when removing device instance
1822 * do generic HDLC cleanup
1823 *
1824 * info pointer to device instance information
1825 */
1826 static void hdlcdev_exit(struct slgt_info *info)
1827 {
1828 unregister_hdlc_device(info->netdev);
1829 free_netdev(info->netdev);
1830 info->netdev = NULL;
1831 }
1832
1833 #endif /* ifdef CONFIG_HDLC */
1834
1835 /*
1836 * get async data from rx DMA buffers
1837 */
1838 static void rx_async(struct slgt_info *info)
1839 {
1840 struct tty_struct *tty = info->port.tty;
1841 struct mgsl_icount *icount = &info->icount;
1842 unsigned int start, end;
1843 unsigned char *p;
1844 unsigned char status;
1845 struct slgt_desc *bufs = info->rbufs;
1846 int i, count;
1847 int chars = 0;
1848 int stat;
1849 unsigned char ch;
1850
1851 start = end = info->rbuf_current;
1852
1853 while(desc_complete(bufs[end])) {
1854 count = desc_count(bufs[end]) - info->rbuf_index;
1855 p = bufs[end].buf + info->rbuf_index;
1856
1857 DBGISR(("%s rx_async count=%d\n", info->device_name, count));
1858 DBGDATA(info, p, count, "rx");
1859
1860 for(i=0 ; i < count; i+=2, p+=2) {
1861 ch = *p;
1862 icount->rx++;
1863
1864 stat = 0;
1865
1866 if ((status = *(p+1) & (BIT1 + BIT0))) {
1867 if (status & BIT1)
1868 icount->parity++;
1869 else if (status & BIT0)
1870 icount->frame++;
1871 /* discard char if tty control flags say so */
1872 if (status & info->ignore_status_mask)
1873 continue;
1874 if (status & BIT1)
1875 stat = TTY_PARITY;
1876 else if (status & BIT0)
1877 stat = TTY_FRAME;
1878 }
1879 if (tty) {
1880 tty_insert_flip_char(tty, ch, stat);
1881 chars++;
1882 }
1883 }
1884
1885 if (i < count) {
1886 /* receive buffer not completed */
1887 info->rbuf_index += i;
1888 mod_timer(&info->rx_timer, jiffies + 1);
1889 break;
1890 }
1891
1892 info->rbuf_index = 0;
1893 free_rbufs(info, end, end);
1894
1895 if (++end == info->rbuf_count)
1896 end = 0;
1897
1898 /* if entire list searched then no frame available */
1899 if (end == start)
1900 break;
1901 }
1902
1903 if (tty && chars)
1904 tty_flip_buffer_push(tty);
1905 }
1906
1907 /*
1908 * return next bottom half action to perform
1909 */
1910 static int bh_action(struct slgt_info *info)
1911 {
1912 unsigned long flags;
1913 int rc;
1914
1915 spin_lock_irqsave(&info->lock,flags);
1916
1917 if (info->pending_bh & BH_RECEIVE) {
1918 info->pending_bh &= ~BH_RECEIVE;
1919 rc = BH_RECEIVE;
1920 } else if (info->pending_bh & BH_TRANSMIT) {
1921 info->pending_bh &= ~BH_TRANSMIT;
1922 rc = BH_TRANSMIT;
1923 } else if (info->pending_bh & BH_STATUS) {
1924 info->pending_bh &= ~BH_STATUS;
1925 rc = BH_STATUS;
1926 } else {
1927 /* Mark BH routine as complete */
1928 info->bh_running = false;
1929 info->bh_requested = false;
1930 rc = 0;
1931 }
1932
1933 spin_unlock_irqrestore(&info->lock,flags);
1934
1935 return rc;
1936 }
1937
1938 /*
1939 * perform bottom half processing
1940 */
1941 static void bh_handler(struct work_struct *work)
1942 {
1943 struct slgt_info *info = container_of(work, struct slgt_info, task);
1944 int action;
1945
1946 if (!info)
1947 return;
1948 info->bh_running = true;
1949
1950 while((action = bh_action(info))) {
1951 switch (action) {
1952 case BH_RECEIVE:
1953 DBGBH(("%s bh receive\n", info->device_name));
1954 switch(info->params.mode) {
1955 case MGSL_MODE_ASYNC:
1956 rx_async(info);
1957 break;
1958 case MGSL_MODE_HDLC:
1959 while(rx_get_frame(info));
1960 break;
1961 case MGSL_MODE_RAW:
1962 case MGSL_MODE_MONOSYNC:
1963 case MGSL_MODE_BISYNC:
1964 while(rx_get_buf(info));
1965 break;
1966 }
1967 /* restart receiver if rx DMA buffers exhausted */
1968 if (info->rx_restart)
1969 rx_start(info);
1970 break;
1971 case BH_TRANSMIT:
1972 bh_transmit(info);
1973 break;
1974 case BH_STATUS:
1975 DBGBH(("%s bh status\n", info->device_name));
1976 info->ri_chkcount = 0;
1977 info->dsr_chkcount = 0;
1978 info->dcd_chkcount = 0;
1979 info->cts_chkcount = 0;
1980 break;
1981 default:
1982 DBGBH(("%s unknown action\n", info->device_name));
1983 break;
1984 }
1985 }
1986 DBGBH(("%s bh_handler exit\n", info->device_name));
1987 }
1988
1989 static void bh_transmit(struct slgt_info *info)
1990 {
1991 struct tty_struct *tty = info->port.tty;
1992
1993 DBGBH(("%s bh_transmit\n", info->device_name));
1994 if (tty)
1995 tty_wakeup(tty);
1996 }
1997
1998 static void dsr_change(struct slgt_info *info, unsigned short status)
1999 {
2000 if (status & BIT3) {
2001 info->signals |= SerialSignal_DSR;
2002 info->input_signal_events.dsr_up++;
2003 } else {
2004 info->signals &= ~SerialSignal_DSR;
2005 info->input_signal_events.dsr_down++;
2006 }
2007 DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
2008 if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2009 slgt_irq_off(info, IRQ_DSR);
2010 return;
2011 }
2012 info->icount.dsr++;
2013 wake_up_interruptible(&info->status_event_wait_q);
2014 wake_up_interruptible(&info->event_wait_q);
2015 info->pending_bh |= BH_STATUS;
2016 }
2017
2018 static void cts_change(struct slgt_info *info, unsigned short status)
2019 {
2020 if (status & BIT2) {
2021 info->signals |= SerialSignal_CTS;
2022 info->input_signal_events.cts_up++;
2023 } else {
2024 info->signals &= ~SerialSignal_CTS;
2025 info->input_signal_events.cts_down++;
2026 }
2027 DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
2028 if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2029 slgt_irq_off(info, IRQ_CTS);
2030 return;
2031 }
2032 info->icount.cts++;
2033 wake_up_interruptible(&info->status_event_wait_q);
2034 wake_up_interruptible(&info->event_wait_q);
2035 info->pending_bh |= BH_STATUS;
2036
2037 if (info->port.flags & ASYNC_CTS_FLOW) {
2038 if (info->port.tty) {
2039 if (info->port.tty->hw_stopped) {
2040 if (info->signals & SerialSignal_CTS) {
2041 info->port.tty->hw_stopped = 0;
2042 info->pending_bh |= BH_TRANSMIT;
2043 return;
2044 }
2045 } else {
2046 if (!(info->signals & SerialSignal_CTS))
2047 info->port.tty->hw_stopped = 1;
2048 }
2049 }
2050 }
2051 }
2052
2053 static void dcd_change(struct slgt_info *info, unsigned short status)
2054 {
2055 if (status & BIT1) {
2056 info->signals |= SerialSignal_DCD;
2057 info->input_signal_events.dcd_up++;
2058 } else {
2059 info->signals &= ~SerialSignal_DCD;
2060 info->input_signal_events.dcd_down++;
2061 }
2062 DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
2063 if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2064 slgt_irq_off(info, IRQ_DCD);
2065 return;
2066 }
2067 info->icount.dcd++;
2068 #if SYNCLINK_GENERIC_HDLC
2069 if (info->netcount) {
2070 if (info->signals & SerialSignal_DCD)
2071 netif_carrier_on(info->netdev);
2072 else
2073 netif_carrier_off(info->netdev);
2074 }
2075 #endif
2076 wake_up_interruptible(&info->status_event_wait_q);
2077 wake_up_interruptible(&info->event_wait_q);
2078 info->pending_bh |= BH_STATUS;
2079
2080 if (info->port.flags & ASYNC_CHECK_CD) {
2081 if (info->signals & SerialSignal_DCD)
2082 wake_up_interruptible(&info->port.open_wait);
2083 else {
2084 if (info->port.tty)
2085 tty_hangup(info->port.tty);
2086 }
2087 }
2088 }
2089
2090 static void ri_change(struct slgt_info *info, unsigned short status)
2091 {
2092 if (status & BIT0) {
2093 info->signals |= SerialSignal_RI;
2094 info->input_signal_events.ri_up++;
2095 } else {
2096 info->signals &= ~SerialSignal_RI;
2097 info->input_signal_events.ri_down++;
2098 }
2099 DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
2100 if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2101 slgt_irq_off(info, IRQ_RI);
2102 return;
2103 }
2104 info->icount.rng++;
2105 wake_up_interruptible(&info->status_event_wait_q);
2106 wake_up_interruptible(&info->event_wait_q);
2107 info->pending_bh |= BH_STATUS;
2108 }
2109
2110 static void isr_serial(struct slgt_info *info)
2111 {
2112 unsigned short status = rd_reg16(info, SSR);
2113
2114 DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
2115
2116 wr_reg16(info, SSR, status); /* clear pending */
2117
2118 info->irq_occurred = true;
2119
2120 if (info->params.mode == MGSL_MODE_ASYNC) {
2121 if (status & IRQ_TXIDLE) {
2122 if (info->tx_count)
2123 isr_txeom(info, status);
2124 }
2125 if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
2126 info->icount.brk++;
2127 /* process break detection if tty control allows */
2128 if (info->port.tty) {
2129 if (!(status & info->ignore_status_mask)) {
2130 if (info->read_status_mask & MASK_BREAK) {
2131 tty_insert_flip_char(info->port.tty, 0, TTY_BREAK);
2132 if (info->port.flags & ASYNC_SAK)
2133 do_SAK(info->port.tty);
2134 }
2135 }
2136 }
2137 }
2138 } else {
2139 if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
2140 isr_txeom(info, status);
2141
2142 if (status & IRQ_RXIDLE) {
2143 if (status & RXIDLE)
2144 info->icount.rxidle++;
2145 else
2146 info->icount.exithunt++;
2147 wake_up_interruptible(&info->event_wait_q);
2148 }
2149
2150 if (status & IRQ_RXOVER)
2151 rx_start(info);
2152 }
2153
2154 if (status & IRQ_DSR)
2155 dsr_change(info, status);
2156 if (status & IRQ_CTS)
2157 cts_change(info, status);
2158 if (status & IRQ_DCD)
2159 dcd_change(info, status);
2160 if (status & IRQ_RI)
2161 ri_change(info, status);
2162 }
2163
2164 static void isr_rdma(struct slgt_info *info)
2165 {
2166 unsigned int status = rd_reg32(info, RDCSR);
2167
2168 DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
2169
2170 /* RDCSR (rx DMA control/status)
2171 *
2172 * 31..07 reserved
2173 * 06 save status byte to DMA buffer
2174 * 05 error
2175 * 04 eol (end of list)
2176 * 03 eob (end of buffer)
2177 * 02 IRQ enable
2178 * 01 reset
2179 * 00 enable
2180 */
2181 wr_reg32(info, RDCSR, status); /* clear pending */
2182
2183 if (status & (BIT5 + BIT4)) {
2184 DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
2185 info->rx_restart = true;
2186 }
2187 info->pending_bh |= BH_RECEIVE;
2188 }
2189
2190 static void isr_tdma(struct slgt_info *info)
2191 {
2192 unsigned int status = rd_reg32(info, TDCSR);
2193
2194 DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
2195
2196 /* TDCSR (tx DMA control/status)
2197 *
2198 * 31..06 reserved
2199 * 05 error
2200 * 04 eol (end of list)
2201 * 03 eob (end of buffer)
2202 * 02 IRQ enable
2203 * 01 reset
2204 * 00 enable
2205 */
2206 wr_reg32(info, TDCSR, status); /* clear pending */
2207
2208 if (status & (BIT5 + BIT4 + BIT3)) {
2209 // another transmit buffer has completed
2210 // run bottom half to get more send data from user
2211 info->pending_bh |= BH_TRANSMIT;
2212 }
2213 }
2214
2215 static void isr_txeom(struct slgt_info *info, unsigned short status)
2216 {
2217 DBGISR(("%s txeom status=%04x\n", info->device_name, status));
2218
2219 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
2220 tdma_reset(info);
2221 reset_tbufs(info);
2222 if (status & IRQ_TXUNDER) {
2223 unsigned short val = rd_reg16(info, TCR);
2224 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
2225 wr_reg16(info, TCR, val); /* clear reset bit */
2226 }
2227
2228 if (info->tx_active) {
2229 if (info->params.mode != MGSL_MODE_ASYNC) {
2230 if (status & IRQ_TXUNDER)
2231 info->icount.txunder++;
2232 else if (status & IRQ_TXIDLE)
2233 info->icount.txok++;
2234 }
2235
2236 info->tx_active = false;
2237 info->tx_count = 0;
2238
2239 del_timer(&info->tx_timer);
2240
2241 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
2242 info->signals &= ~SerialSignal_RTS;
2243 info->drop_rts_on_tx_done = false;
2244 set_signals(info);
2245 }
2246
2247 #if SYNCLINK_GENERIC_HDLC
2248 if (info->netcount)
2249 hdlcdev_tx_done(info);
2250 else
2251 #endif
2252 {
2253 if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2254 tx_stop(info);
2255 return;
2256 }
2257 info->pending_bh |= BH_TRANSMIT;
2258 }
2259 }
2260 }
2261
2262 static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
2263 {
2264 struct cond_wait *w, *prev;
2265
2266 /* wake processes waiting for specific transitions */
2267 for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
2268 if (w->data & changed) {
2269 w->data = state;
2270 wake_up_interruptible(&w->q);
2271 if (prev != NULL)
2272 prev->next = w->next;
2273 else
2274 info->gpio_wait_q = w->next;
2275 } else
2276 prev = w;
2277 }
2278 }
2279
2280 /* interrupt service routine
2281 *
2282 * irq interrupt number
2283 * dev_id device ID supplied during interrupt registration
2284 */
2285 static irqreturn_t slgt_interrupt(int dummy, void *dev_id)
2286 {
2287 struct slgt_info *info = dev_id;
2288 unsigned int gsr;
2289 unsigned int i;
2290
2291 DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level));
2292
2293 spin_lock(&info->lock);
2294
2295 while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
2296 DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
2297 info->irq_occurred = true;
2298 for(i=0; i < info->port_count ; i++) {
2299 if (info->port_array[i] == NULL)
2300 continue;
2301 if (gsr & (BIT8 << i))
2302 isr_serial(info->port_array[i]);
2303 if (gsr & (BIT16 << (i*2)))
2304 isr_rdma(info->port_array[i]);
2305 if (gsr & (BIT17 << (i*2)))
2306 isr_tdma(info->port_array[i]);
2307 }
2308 }
2309
2310 if (info->gpio_present) {
2311 unsigned int state;
2312 unsigned int changed;
2313 while ((changed = rd_reg32(info, IOSR)) != 0) {
2314 DBGISR(("%s iosr=%08x\n", info->device_name, changed));
2315 /* read latched state of GPIO signals */
2316 state = rd_reg32(info, IOVR);
2317 /* clear pending GPIO interrupt bits */
2318 wr_reg32(info, IOSR, changed);
2319 for (i=0 ; i < info->port_count ; i++) {
2320 if (info->port_array[i] != NULL)
2321 isr_gpio(info->port_array[i], changed, state);
2322 }
2323 }
2324 }
2325
2326 for(i=0; i < info->port_count ; i++) {
2327 struct slgt_info *port = info->port_array[i];
2328
2329 if (port && (port->port.count || port->netcount) &&
2330 port->pending_bh && !port->bh_running &&
2331 !port->bh_requested) {
2332 DBGISR(("%s bh queued\n", port->device_name));
2333 schedule_work(&port->task);
2334 port->bh_requested = true;
2335 }
2336 }
2337
2338 spin_unlock(&info->lock);
2339
2340 DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level));
2341 return IRQ_HANDLED;
2342 }
2343
2344 static int startup(struct slgt_info *info)
2345 {
2346 DBGINFO(("%s startup\n", info->device_name));
2347
2348 if (info->port.flags & ASYNC_INITIALIZED)
2349 return 0;
2350
2351 if (!info->tx_buf) {
2352 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2353 if (!info->tx_buf) {
2354 DBGERR(("%s can't allocate tx buffer\n", info->device_name));
2355 return -ENOMEM;
2356 }
2357 }
2358
2359 info->pending_bh = 0;
2360
2361 memset(&info->icount, 0, sizeof(info->icount));
2362
2363 /* program hardware for current parameters */
2364 change_params(info);
2365
2366 if (info->port.tty)
2367 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2368
2369 info->port.flags |= ASYNC_INITIALIZED;
2370
2371 return 0;
2372 }
2373
2374 /*
2375 * called by close() and hangup() to shutdown hardware
2376 */
2377 static void shutdown(struct slgt_info *info)
2378 {
2379 unsigned long flags;
2380
2381 if (!(info->port.flags & ASYNC_INITIALIZED))
2382 return;
2383
2384 DBGINFO(("%s shutdown\n", info->device_name));
2385
2386 /* clear status wait queue because status changes */
2387 /* can't happen after shutting down the hardware */
2388 wake_up_interruptible(&info->status_event_wait_q);
2389 wake_up_interruptible(&info->event_wait_q);
2390
2391 del_timer_sync(&info->tx_timer);
2392 del_timer_sync(&info->rx_timer);
2393
2394 kfree(info->tx_buf);
2395 info->tx_buf = NULL;
2396
2397 spin_lock_irqsave(&info->lock,flags);
2398
2399 tx_stop(info);
2400 rx_stop(info);
2401
2402 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
2403
2404 if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
2405 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2406 set_signals(info);
2407 }
2408
2409 flush_cond_wait(&info->gpio_wait_q);
2410
2411 spin_unlock_irqrestore(&info->lock,flags);
2412
2413 if (info->port.tty)
2414 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2415
2416 info->port.flags &= ~ASYNC_INITIALIZED;
2417 }
2418
2419 static void program_hw(struct slgt_info *info)
2420 {
2421 unsigned long flags;
2422
2423 spin_lock_irqsave(&info->lock,flags);
2424
2425 rx_stop(info);
2426 tx_stop(info);
2427
2428 if (info->params.mode != MGSL_MODE_ASYNC ||
2429 info->netcount)
2430 sync_mode(info);
2431 else
2432 async_mode(info);
2433
2434 set_signals(info);
2435
2436 info->dcd_chkcount = 0;
2437 info->cts_chkcount = 0;
2438 info->ri_chkcount = 0;
2439 info->dsr_chkcount = 0;
2440
2441 slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
2442 get_signals(info);
2443
2444 if (info->netcount ||
2445 (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
2446 rx_start(info);
2447
2448 spin_unlock_irqrestore(&info->lock,flags);
2449 }
2450
2451 /*
2452 * reconfigure adapter based on new parameters
2453 */
2454 static void change_params(struct slgt_info *info)
2455 {
2456 unsigned cflag;
2457 int bits_per_char;
2458
2459 if (!info->port.tty || !info->port.tty->termios)
2460 return;
2461 DBGINFO(("%s change_params\n", info->device_name));
2462
2463 cflag = info->port.tty->termios->c_cflag;
2464
2465 /* if B0 rate (hangup) specified then negate DTR and RTS */
2466 /* otherwise assert DTR and RTS */
2467 if (cflag & CBAUD)
2468 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
2469 else
2470 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2471
2472 /* byte size and parity */
2473
2474 switch (cflag & CSIZE) {
2475 case CS5: info->params.data_bits = 5; break;
2476 case CS6: info->params.data_bits = 6; break;
2477 case CS7: info->params.data_bits = 7; break;
2478 case CS8: info->params.data_bits = 8; break;
2479 default: info->params.data_bits = 7; break;
2480 }
2481
2482 info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
2483
2484 if (cflag & PARENB)
2485 info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
2486 else
2487 info->params.parity = ASYNC_PARITY_NONE;
2488
2489 /* calculate number of jiffies to transmit a full
2490 * FIFO (32 bytes) at specified data rate
2491 */
2492 bits_per_char = info->params.data_bits +
2493 info->params.stop_bits + 1;
2494
2495 info->params.data_rate = tty_get_baud_rate(info->port.tty);
2496
2497 if (info->params.data_rate) {
2498 info->timeout = (32*HZ*bits_per_char) /
2499 info->params.data_rate;
2500 }
2501 info->timeout += HZ/50; /* Add .02 seconds of slop */
2502
2503 if (cflag & CRTSCTS)
2504 info->port.flags |= ASYNC_CTS_FLOW;
2505 else
2506 info->port.flags &= ~ASYNC_CTS_FLOW;
2507
2508 if (cflag & CLOCAL)
2509 info->port.flags &= ~ASYNC_CHECK_CD;
2510 else
2511 info->port.flags |= ASYNC_CHECK_CD;
2512
2513 /* process tty input control flags */
2514
2515 info->read_status_mask = IRQ_RXOVER;
2516 if (I_INPCK(info->port.tty))
2517 info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
2518 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2519 info->read_status_mask |= MASK_BREAK;
2520 if (I_IGNPAR(info->port.tty))
2521 info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
2522 if (I_IGNBRK(info->port.tty)) {
2523 info->ignore_status_mask |= MASK_BREAK;
2524 /* If ignoring parity and break indicators, ignore
2525 * overruns too. (For real raw support).
2526 */
2527 if (I_IGNPAR(info->port.tty))
2528 info->ignore_status_mask |= MASK_OVERRUN;
2529 }
2530
2531 program_hw(info);
2532 }
2533
2534 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
2535 {
2536 DBGINFO(("%s get_stats\n", info->device_name));
2537 if (!user_icount) {
2538 memset(&info->icount, 0, sizeof(info->icount));
2539 } else {
2540 if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
2541 return -EFAULT;
2542 }
2543 return 0;
2544 }
2545
2546 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
2547 {
2548 DBGINFO(("%s get_params\n", info->device_name));
2549 if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
2550 return -EFAULT;
2551 return 0;
2552 }
2553
2554 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
2555 {
2556 unsigned long flags;
2557 MGSL_PARAMS tmp_params;
2558
2559 DBGINFO(("%s set_params\n", info->device_name));
2560 if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
2561 return -EFAULT;
2562
2563 spin_lock_irqsave(&info->lock, flags);
2564 memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
2565 spin_unlock_irqrestore(&info->lock, flags);
2566
2567 change_params(info);
2568
2569 return 0;
2570 }
2571
2572 static int get_txidle(struct slgt_info *info, int __user *idle_mode)
2573 {
2574 DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
2575 if (put_user(info->idle_mode, idle_mode))
2576 return -EFAULT;
2577 return 0;
2578 }
2579
2580 static int set_txidle(struct slgt_info *info, int idle_mode)
2581 {
2582 unsigned long flags;
2583 DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
2584 spin_lock_irqsave(&info->lock,flags);
2585 info->idle_mode = idle_mode;
2586 if (info->params.mode != MGSL_MODE_ASYNC)
2587 tx_set_idle(info);
2588 spin_unlock_irqrestore(&info->lock,flags);
2589 return 0;
2590 }
2591
2592 static int tx_enable(struct slgt_info *info, int enable)
2593 {
2594 unsigned long flags;
2595 DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
2596 spin_lock_irqsave(&info->lock,flags);
2597 if (enable) {
2598 if (!info->tx_enabled)
2599 tx_start(info);
2600 } else {
2601 if (info->tx_enabled)
2602 tx_stop(info);
2603 }
2604 spin_unlock_irqrestore(&info->lock,flags);
2605 return 0;
2606 }
2607
2608 /*
2609 * abort transmit HDLC frame
2610 */
2611 static int tx_abort(struct slgt_info *info)
2612 {
2613 unsigned long flags;
2614 DBGINFO(("%s tx_abort\n", info->device_name));
2615 spin_lock_irqsave(&info->lock,flags);
2616 tdma_reset(info);
2617 spin_unlock_irqrestore(&info->lock,flags);
2618 return 0;
2619 }
2620
2621 static int rx_enable(struct slgt_info *info, int enable)
2622 {
2623 unsigned long flags;
2624 unsigned int rbuf_fill_level;
2625 DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable));
2626 spin_lock_irqsave(&info->lock,flags);
2627 /*
2628 * enable[31..16] = receive DMA buffer fill level
2629 * 0 = noop (leave fill level unchanged)
2630 * fill level must be multiple of 4 and <= buffer size
2631 */
2632 rbuf_fill_level = ((unsigned int)enable) >> 16;
2633 if (rbuf_fill_level) {
2634 if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) {
2635 spin_unlock_irqrestore(&info->lock, flags);
2636 return -EINVAL;
2637 }
2638 info->rbuf_fill_level = rbuf_fill_level;
2639 rx_stop(info); /* restart receiver to use new fill level */
2640 }
2641
2642 /*
2643 * enable[1..0] = receiver enable command
2644 * 0 = disable
2645 * 1 = enable
2646 * 2 = enable or force hunt mode if already enabled
2647 */
2648 enable &= 3;
2649 if (enable) {
2650 if (!info->rx_enabled)
2651 rx_start(info);
2652 else if (enable == 2) {
2653 /* force hunt mode (write 1 to RCR[3]) */
2654 wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
2655 }
2656 } else {
2657 if (info->rx_enabled)
2658 rx_stop(info);
2659 }
2660 spin_unlock_irqrestore(&info->lock,flags);
2661 return 0;
2662 }
2663
2664 /*
2665 * wait for specified event to occur
2666 */
2667 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
2668 {
2669 unsigned long flags;
2670 int s;
2671 int rc=0;
2672 struct mgsl_icount cprev, cnow;
2673 int events;
2674 int mask;
2675 struct _input_signal_events oldsigs, newsigs;
2676 DECLARE_WAITQUEUE(wait, current);
2677
2678 if (get_user(mask, mask_ptr))
2679 return -EFAULT;
2680
2681 DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
2682
2683 spin_lock_irqsave(&info->lock,flags);
2684
2685 /* return immediately if state matches requested events */
2686 get_signals(info);
2687 s = info->signals;
2688
2689 events = mask &
2690 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2691 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2692 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2693 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2694 if (events) {
2695 spin_unlock_irqrestore(&info->lock,flags);
2696 goto exit;
2697 }
2698
2699 /* save current irq counts */
2700 cprev = info->icount;
2701 oldsigs = info->input_signal_events;
2702
2703 /* enable hunt and idle irqs if needed */
2704 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
2705 unsigned short val = rd_reg16(info, SCR);
2706 if (!(val & IRQ_RXIDLE))
2707 wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
2708 }
2709
2710 set_current_state(TASK_INTERRUPTIBLE);
2711 add_wait_queue(&info->event_wait_q, &wait);
2712
2713 spin_unlock_irqrestore(&info->lock,flags);
2714
2715 for(;;) {
2716 schedule();
2717 if (signal_pending(current)) {
2718 rc = -ERESTARTSYS;
2719 break;
2720 }
2721
2722 /* get current irq counts */
2723 spin_lock_irqsave(&info->lock,flags);
2724 cnow = info->icount;
2725 newsigs = info->input_signal_events;
2726 set_current_state(TASK_INTERRUPTIBLE);
2727 spin_unlock_irqrestore(&info->lock,flags);
2728
2729 /* if no change, wait aborted for some reason */
2730 if (newsigs.dsr_up == oldsigs.dsr_up &&
2731 newsigs.dsr_down == oldsigs.dsr_down &&
2732 newsigs.dcd_up == oldsigs.dcd_up &&
2733 newsigs.dcd_down == oldsigs.dcd_down &&
2734 newsigs.cts_up == oldsigs.cts_up &&
2735 newsigs.cts_down == oldsigs.cts_down &&
2736 newsigs.ri_up == oldsigs.ri_up &&
2737 newsigs.ri_down == oldsigs.ri_down &&
2738 cnow.exithunt == cprev.exithunt &&
2739 cnow.rxidle == cprev.rxidle) {
2740 rc = -EIO;
2741 break;
2742 }
2743
2744 events = mask &
2745 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2746 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2747 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2748 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2749 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2750 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2751 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2752 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2753 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2754 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2755 if (events)
2756 break;
2757
2758 cprev = cnow;
2759 oldsigs = newsigs;
2760 }
2761
2762 remove_wait_queue(&info->event_wait_q, &wait);
2763 set_current_state(TASK_RUNNING);
2764
2765
2766 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2767 spin_lock_irqsave(&info->lock,flags);
2768 if (!waitqueue_active(&info->event_wait_q)) {
2769 /* disable enable exit hunt mode/idle rcvd IRQs */
2770 wr_reg16(info, SCR,
2771 (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
2772 }
2773 spin_unlock_irqrestore(&info->lock,flags);
2774 }
2775 exit:
2776 if (rc == 0)
2777 rc = put_user(events, mask_ptr);
2778 return rc;
2779 }
2780
2781 static int get_interface(struct slgt_info *info, int __user *if_mode)
2782 {
2783 DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
2784 if (put_user(info->if_mode, if_mode))
2785 return -EFAULT;
2786 return 0;
2787 }
2788
2789 static int set_interface(struct slgt_info *info, int if_mode)
2790 {
2791 unsigned long flags;
2792 unsigned short val;
2793
2794 DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
2795 spin_lock_irqsave(&info->lock,flags);
2796 info->if_mode = if_mode;
2797
2798 msc_set_vcr(info);
2799
2800 /* TCR (tx control) 07 1=RTS driver control */
2801 val = rd_reg16(info, TCR);
2802 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
2803 val |= BIT7;
2804 else
2805 val &= ~BIT7;
2806 wr_reg16(info, TCR, val);
2807
2808 spin_unlock_irqrestore(&info->lock,flags);
2809 return 0;
2810 }
2811
2812 /*
2813 * set general purpose IO pin state and direction
2814 *
2815 * user_gpio fields:
2816 * state each bit indicates a pin state
2817 * smask set bit indicates pin state to set
2818 * dir each bit indicates a pin direction (0=input, 1=output)
2819 * dmask set bit indicates pin direction to set
2820 */
2821 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2822 {
2823 unsigned long flags;
2824 struct gpio_desc gpio;
2825 __u32 data;
2826
2827 if (!info->gpio_present)
2828 return -EINVAL;
2829 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2830 return -EFAULT;
2831 DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
2832 info->device_name, gpio.state, gpio.smask,
2833 gpio.dir, gpio.dmask));
2834
2835 spin_lock_irqsave(&info->lock,flags);
2836 if (gpio.dmask) {
2837 data = rd_reg32(info, IODR);
2838 data |= gpio.dmask & gpio.dir;
2839 data &= ~(gpio.dmask & ~gpio.dir);
2840 wr_reg32(info, IODR, data);
2841 }
2842 if (gpio.smask) {
2843 data = rd_reg32(info, IOVR);
2844 data |= gpio.smask & gpio.state;
2845 data &= ~(gpio.smask & ~gpio.state);
2846 wr_reg32(info, IOVR, data);
2847 }
2848 spin_unlock_irqrestore(&info->lock,flags);
2849
2850 return 0;
2851 }
2852
2853 /*
2854 * get general purpose IO pin state and direction
2855 */
2856 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2857 {
2858 struct gpio_desc gpio;
2859 if (!info->gpio_present)
2860 return -EINVAL;
2861 gpio.state = rd_reg32(info, IOVR);
2862 gpio.smask = 0xffffffff;
2863 gpio.dir = rd_reg32(info, IODR);
2864 gpio.dmask = 0xffffffff;
2865 if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2866 return -EFAULT;
2867 DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
2868 info->device_name, gpio.state, gpio.dir));
2869 return 0;
2870 }
2871
2872 /*
2873 * conditional wait facility
2874 */
2875 static void init_cond_wait(struct cond_wait *w, unsigned int data)
2876 {
2877 init_waitqueue_head(&w->q);
2878 init_waitqueue_entry(&w->wait, current);
2879 w->data = data;
2880 }
2881
2882 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
2883 {
2884 set_current_state(TASK_INTERRUPTIBLE);
2885 add_wait_queue(&w->q, &w->wait);
2886 w->next = *head;
2887 *head = w;
2888 }
2889
2890 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
2891 {
2892 struct cond_wait *w, *prev;
2893 remove_wait_queue(&cw->q, &cw->wait);
2894 set_current_state(TASK_RUNNING);
2895 for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
2896 if (w == cw) {
2897 if (prev != NULL)
2898 prev->next = w->next;
2899 else
2900 *head = w->next;
2901 break;
2902 }
2903 }
2904 }
2905
2906 static void flush_cond_wait(struct cond_wait **head)
2907 {
2908 while (*head != NULL) {
2909 wake_up_interruptible(&(*head)->q);
2910 *head = (*head)->next;
2911 }
2912 }
2913
2914 /*
2915 * wait for general purpose I/O pin(s) to enter specified state
2916 *
2917 * user_gpio fields:
2918 * state - bit indicates target pin state
2919 * smask - set bit indicates watched pin
2920 *
2921 * The wait ends when at least one watched pin enters the specified
2922 * state. When 0 (no error) is returned, user_gpio->state is set to the
2923 * state of all GPIO pins when the wait ends.
2924 *
2925 * Note: Each pin may be a dedicated input, dedicated output, or
2926 * configurable input/output. The number and configuration of pins
2927 * varies with the specific adapter model. Only input pins (dedicated
2928 * or configured) can be monitored with this function.
2929 */
2930 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2931 {
2932 unsigned long flags;
2933 int rc = 0;
2934 struct gpio_desc gpio;
2935 struct cond_wait wait;
2936 u32 state;
2937
2938 if (!info->gpio_present)
2939 return -EINVAL;
2940 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2941 return -EFAULT;
2942 DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
2943 info->device_name, gpio.state, gpio.smask));
2944 /* ignore output pins identified by set IODR bit */
2945 if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
2946 return -EINVAL;
2947 init_cond_wait(&wait, gpio.smask);
2948
2949 spin_lock_irqsave(&info->lock, flags);
2950 /* enable interrupts for watched pins */
2951 wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
2952 /* get current pin states */
2953 state = rd_reg32(info, IOVR);
2954
2955 if (gpio.smask & ~(state ^ gpio.state)) {
2956 /* already in target state */
2957 gpio.state = state;
2958 } else {
2959 /* wait for target state */
2960 add_cond_wait(&info->gpio_wait_q, &wait);
2961 spin_unlock_irqrestore(&info->lock, flags);
2962 schedule();
2963 if (signal_pending(current))
2964 rc = -ERESTARTSYS;
2965 else
2966 gpio.state = wait.data;
2967 spin_lock_irqsave(&info->lock, flags);
2968 remove_cond_wait(&info->gpio_wait_q, &wait);
2969 }
2970
2971 /* disable all GPIO interrupts if no waiting processes */
2972 if (info->gpio_wait_q == NULL)
2973 wr_reg32(info, IOER, 0);
2974 spin_unlock_irqrestore(&info->lock,flags);
2975
2976 if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2977 rc = -EFAULT;
2978 return rc;
2979 }
2980
2981 static int modem_input_wait(struct slgt_info *info,int arg)
2982 {
2983 unsigned long flags;
2984 int rc;
2985 struct mgsl_icount cprev, cnow;
2986 DECLARE_WAITQUEUE(wait, current);
2987
2988 /* save current irq counts */
2989 spin_lock_irqsave(&info->lock,flags);
2990 cprev = info->icount;
2991 add_wait_queue(&info->status_event_wait_q, &wait);
2992 set_current_state(TASK_INTERRUPTIBLE);
2993 spin_unlock_irqrestore(&info->lock,flags);
2994
2995 for(;;) {
2996 schedule();
2997 if (signal_pending(current)) {
2998 rc = -ERESTARTSYS;
2999 break;
3000 }
3001
3002 /* get new irq counts */
3003 spin_lock_irqsave(&info->lock,flags);
3004 cnow = info->icount;
3005 set_current_state(TASK_INTERRUPTIBLE);
3006 spin_unlock_irqrestore(&info->lock,flags);
3007
3008 /* if no change, wait aborted for some reason */
3009 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3010 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3011 rc = -EIO;
3012 break;
3013 }
3014
3015 /* check for change in caller specified modem input */
3016 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3017 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3018 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3019 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3020 rc = 0;
3021 break;
3022 }
3023
3024 cprev = cnow;
3025 }
3026 remove_wait_queue(&info->status_event_wait_q, &wait);
3027 set_current_state(TASK_RUNNING);
3028 return rc;
3029 }
3030
3031 /*
3032 * return state of serial control and status signals
3033 */
3034 static int tiocmget(struct tty_struct *tty, struct file *file)
3035 {
3036 struct slgt_info *info = tty->driver_data;
3037 unsigned int result;
3038 unsigned long flags;
3039
3040 spin_lock_irqsave(&info->lock,flags);
3041 get_signals(info);
3042 spin_unlock_irqrestore(&info->lock,flags);
3043
3044 result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3045 ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3046 ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3047 ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) +
3048 ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3049 ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3050
3051 DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
3052 return result;
3053 }
3054
3055 /*
3056 * set modem control signals (DTR/RTS)
3057 *
3058 * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
3059 * TIOCMSET = set/clear signal values
3060 * value bit mask for command
3061 */
3062 static int tiocmset(struct tty_struct *tty, struct file *file,
3063 unsigned int set, unsigned int clear)
3064 {
3065 struct slgt_info *info = tty->driver_data;
3066 unsigned long flags;
3067
3068 DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
3069
3070 if (set & TIOCM_RTS)
3071 info->signals |= SerialSignal_RTS;
3072 if (set & TIOCM_DTR)
3073 info->signals |= SerialSignal_DTR;
3074 if (clear & TIOCM_RTS)
3075 info->signals &= ~SerialSignal_RTS;
3076 if (clear & TIOCM_DTR)
3077 info->signals &= ~SerialSignal_DTR;
3078
3079 spin_lock_irqsave(&info->lock,flags);
3080 set_signals(info);
3081 spin_unlock_irqrestore(&info->lock,flags);
3082 return 0;
3083 }
3084
3085 static int carrier_raised(struct tty_port *port)
3086 {
3087 unsigned long flags;
3088 struct slgt_info *info = container_of(port, struct slgt_info, port);
3089
3090 spin_lock_irqsave(&info->lock,flags);
3091 get_signals(info);
3092 spin_unlock_irqrestore(&info->lock,flags);
3093 return (info->signals & SerialSignal_DCD) ? 1 : 0;
3094 }
3095
3096 static void raise_dtr_rts(struct tty_port *port)
3097 {
3098 unsigned long flags;
3099 struct slgt_info *info = container_of(port, struct slgt_info, port);
3100
3101 spin_lock_irqsave(&info->lock,flags);
3102 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
3103 set_signals(info);
3104 spin_unlock_irqrestore(&info->lock,flags);
3105 }
3106
3107
3108 /*
3109 * block current process until the device is ready to open
3110 */
3111 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3112 struct slgt_info *info)
3113 {
3114 DECLARE_WAITQUEUE(wait, current);
3115 int retval;
3116 bool do_clocal = false;
3117 bool extra_count = false;
3118 unsigned long flags;
3119 int cd;
3120 struct tty_port *port = &info->port;
3121
3122 DBGINFO(("%s block_til_ready\n", tty->driver->name));
3123
3124 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3125 /* nonblock mode is set or port is not enabled */
3126 port->flags |= ASYNC_NORMAL_ACTIVE;
3127 return 0;
3128 }
3129
3130 if (tty->termios->c_cflag & CLOCAL)
3131 do_clocal = true;
3132
3133 /* Wait for carrier detect and the line to become
3134 * free (i.e., not in use by the callout). While we are in
3135 * this loop, port->count is dropped by one, so that
3136 * close() knows when to free things. We restore it upon
3137 * exit, either normal or abnormal.
3138 */
3139
3140 retval = 0;
3141 add_wait_queue(&port->open_wait, &wait);
3142
3143 spin_lock_irqsave(&info->lock, flags);
3144 if (!tty_hung_up_p(filp)) {
3145 extra_count = true;
3146 port->count--;
3147 }
3148 spin_unlock_irqrestore(&info->lock, flags);
3149 port->blocked_open++;
3150
3151 while (1) {
3152 if ((tty->termios->c_cflag & CBAUD))
3153 tty_port_raise_dtr_rts(port);
3154
3155 set_current_state(TASK_INTERRUPTIBLE);
3156
3157 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3158 retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3159 -EAGAIN : -ERESTARTSYS;
3160 break;
3161 }
3162
3163 cd = tty_port_carrier_raised(port);
3164
3165 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd ))
3166 break;
3167
3168 if (signal_pending(current)) {
3169 retval = -ERESTARTSYS;
3170 break;
3171 }
3172
3173 DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
3174 schedule();
3175 }
3176
3177 set_current_state(TASK_RUNNING);
3178 remove_wait_queue(&port->open_wait, &wait);
3179
3180 if (extra_count)
3181 port->count++;
3182 port->blocked_open--;
3183
3184 if (!retval)
3185 port->flags |= ASYNC_NORMAL_ACTIVE;
3186
3187 DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
3188 return retval;
3189 }
3190
3191 static int alloc_tmp_rbuf(struct slgt_info *info)
3192 {
3193 info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
3194 if (info->tmp_rbuf == NULL)
3195 return -ENOMEM;
3196 return 0;
3197 }
3198
3199 static void free_tmp_rbuf(struct slgt_info *info)
3200 {
3201 kfree(info->tmp_rbuf);
3202 info->tmp_rbuf = NULL;
3203 }
3204
3205 /*
3206 * allocate DMA descriptor lists.
3207 */
3208 static int alloc_desc(struct slgt_info *info)
3209 {
3210 unsigned int i;
3211 unsigned int pbufs;
3212
3213 /* allocate memory to hold descriptor lists */
3214 info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
3215 if (info->bufs == NULL)
3216 return -ENOMEM;
3217
3218 memset(info->bufs, 0, DESC_LIST_SIZE);
3219
3220 info->rbufs = (struct slgt_desc*)info->bufs;
3221 info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
3222
3223 pbufs = (unsigned int)info->bufs_dma_addr;
3224
3225 /*
3226 * Build circular lists of descriptors
3227 */
3228
3229 for (i=0; i < info->rbuf_count; i++) {
3230 /* physical address of this descriptor */
3231 info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
3232
3233 /* physical address of next descriptor */
3234 if (i == info->rbuf_count - 1)
3235 info->rbufs[i].next = cpu_to_le32(pbufs);
3236 else
3237 info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
3238 set_desc_count(info->rbufs[i], DMABUFSIZE);
3239 }
3240
3241 for (i=0; i < info->tbuf_count; i++) {
3242 /* physical address of this descriptor */
3243 info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
3244
3245 /* physical address of next descriptor */
3246 if (i == info->tbuf_count - 1)
3247 info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
3248 else
3249 info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
3250 }
3251
3252 return 0;
3253 }
3254
3255 static void free_desc(struct slgt_info *info)
3256 {
3257 if (info->bufs != NULL) {
3258 pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
3259 info->bufs = NULL;
3260 info->rbufs = NULL;
3261 info->tbufs = NULL;
3262 }
3263 }
3264
3265 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3266 {
3267 int i;
3268 for (i=0; i < count; i++) {
3269 if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
3270 return -ENOMEM;
3271 bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
3272 }
3273 return 0;
3274 }
3275
3276 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3277 {
3278 int i;
3279 for (i=0; i < count; i++) {
3280 if (bufs[i].buf == NULL)
3281 continue;
3282 pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
3283 bufs[i].buf = NULL;
3284 }
3285 }
3286
3287 static int alloc_dma_bufs(struct slgt_info *info)
3288 {
3289 info->rbuf_count = 32;
3290 info->tbuf_count = 32;
3291
3292 if (alloc_desc(info) < 0 ||
3293 alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
3294 alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
3295 alloc_tmp_rbuf(info) < 0) {
3296 DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
3297 return -ENOMEM;
3298 }
3299 reset_rbufs(info);
3300 return 0;
3301 }
3302
3303 static void free_dma_bufs(struct slgt_info *info)
3304 {
3305 if (info->bufs) {
3306 free_bufs(info, info->rbufs, info->rbuf_count);
3307 free_bufs(info, info->tbufs, info->tbuf_count);
3308 free_desc(info);
3309 }
3310 free_tmp_rbuf(info);
3311 }
3312
3313 static int claim_resources(struct slgt_info *info)
3314 {
3315 if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
3316 DBGERR(("%s reg addr conflict, addr=%08X\n",
3317 info->device_name, info->phys_reg_addr));
3318 info->init_error = DiagStatus_AddressConflict;
3319 goto errout;
3320 }
3321 else
3322 info->reg_addr_requested = true;
3323
3324 info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
3325 if (!info->reg_addr) {
3326 DBGERR(("%s cant map device registers, addr=%08X\n",
3327 info->device_name, info->phys_reg_addr));
3328 info->init_error = DiagStatus_CantAssignPciResources;
3329 goto errout;
3330 }
3331 return 0;
3332
3333 errout:
3334 release_resources(info);
3335 return -ENODEV;
3336 }
3337
3338 static void release_resources(struct slgt_info *info)
3339 {
3340 if (info->irq_requested) {
3341 free_irq(info->irq_level, info);
3342 info->irq_requested = false;
3343 }
3344
3345 if (info->reg_addr_requested) {
3346 release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
3347 info->reg_addr_requested = false;
3348 }
3349
3350 if (info->reg_addr) {
3351 iounmap(info->reg_addr);
3352 info->reg_addr = NULL;
3353 }
3354 }
3355
3356 /* Add the specified device instance data structure to the
3357 * global linked list of devices and increment the device count.
3358 */
3359 static void add_device(struct slgt_info *info)
3360 {
3361 char *devstr;
3362
3363 info->next_device = NULL;
3364 info->line = slgt_device_count;
3365 sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
3366
3367 if (info->line < MAX_DEVICES) {
3368 if (maxframe[info->line])
3369 info->max_frame_size = maxframe[info->line];
3370 }
3371
3372 slgt_device_count++;
3373
3374 if (!slgt_device_list)
3375 slgt_device_list = info;
3376 else {
3377 struct slgt_info *current_dev = slgt_device_list;
3378 while(current_dev->next_device)
3379 current_dev = current_dev->next_device;
3380 current_dev->next_device = info;
3381 }
3382
3383 if (info->max_frame_size < 4096)
3384 info->max_frame_size = 4096;
3385 else if (info->max_frame_size > 65535)
3386 info->max_frame_size = 65535;
3387
3388 switch(info->pdev->device) {
3389 case SYNCLINK_GT_DEVICE_ID:
3390 devstr = "GT";
3391 break;
3392 case SYNCLINK_GT2_DEVICE_ID:
3393 devstr = "GT2";
3394 break;
3395 case SYNCLINK_GT4_DEVICE_ID:
3396 devstr = "GT4";
3397 break;
3398 case SYNCLINK_AC_DEVICE_ID:
3399 devstr = "AC";
3400 info->params.mode = MGSL_MODE_ASYNC;
3401 break;
3402 default:
3403 devstr = "(unknown model)";
3404 }
3405 printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
3406 devstr, info->device_name, info->phys_reg_addr,
3407 info->irq_level, info->max_frame_size);
3408
3409 #if SYNCLINK_GENERIC_HDLC
3410 hdlcdev_init(info);
3411 #endif
3412 }
3413
3414 static const struct tty_port_operations slgt_port_ops = {
3415 .carrier_raised = carrier_raised,
3416 .raise_dtr_rts = raise_dtr_rts,
3417 };
3418
3419 /*
3420 * allocate device instance structure, return NULL on failure
3421 */
3422 static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3423 {
3424 struct slgt_info *info;
3425
3426 info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL);
3427
3428 if (!info) {
3429 DBGERR(("%s device alloc failed adapter=%d port=%d\n",
3430 driver_name, adapter_num, port_num));
3431 } else {
3432 tty_port_init(&info->port);
3433 info->port.ops = &slgt_port_ops;
3434 info->magic = MGSL_MAGIC;
3435 INIT_WORK(&info->task, bh_handler);
3436 info->max_frame_size = 4096;
3437 info->rbuf_fill_level = DMABUFSIZE;
3438 info->port.close_delay = 5*HZ/10;
3439 info->port.closing_wait = 30*HZ;
3440 init_waitqueue_head(&info->status_event_wait_q);
3441 init_waitqueue_head(&info->event_wait_q);
3442 spin_lock_init(&info->netlock);
3443 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3444 info->idle_mode = HDLC_TXIDLE_FLAGS;
3445 info->adapter_num = adapter_num;
3446 info->port_num = port_num;
3447
3448 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3449 setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info);
3450
3451 /* Copy configuration info to device instance data */
3452 info->pdev = pdev;
3453 info->irq_level = pdev->irq;
3454 info->phys_reg_addr = pci_resource_start(pdev,0);
3455
3456 info->bus_type = MGSL_BUS_TYPE_PCI;
3457 info->irq_flags = IRQF_SHARED;
3458
3459 info->init_error = -1; /* assume error, set to 0 on successful init */
3460 }
3461
3462 return info;
3463 }
3464
3465 static void device_init(int adapter_num, struct pci_dev *pdev)
3466 {
3467 struct slgt_info *port_array[SLGT_MAX_PORTS];
3468 int i;
3469 int port_count = 1;
3470
3471 if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
3472 port_count = 2;
3473 else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
3474 port_count = 4;
3475
3476 /* allocate device instances for all ports */
3477 for (i=0; i < port_count; ++i) {
3478 port_array[i] = alloc_dev(adapter_num, i, pdev);
3479 if (port_array[i] == NULL) {
3480 for (--i; i >= 0; --i)
3481 kfree(port_array[i]);
3482 return;
3483 }
3484 }
3485
3486 /* give copy of port_array to all ports and add to device list */
3487 for (i=0; i < port_count; ++i) {
3488 memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
3489 add_device(port_array[i]);
3490 port_array[i]->port_count = port_count;
3491 spin_lock_init(&port_array[i]->lock);
3492 }
3493
3494 /* Allocate and claim adapter resources */
3495 if (!claim_resources(port_array[0])) {
3496
3497 alloc_dma_bufs(port_array[0]);
3498
3499 /* copy resource information from first port to others */
3500 for (i = 1; i < port_count; ++i) {
3501 port_array[i]->lock = port_array[0]->lock;
3502 port_array[i]->irq_level = port_array[0]->irq_level;
3503 port_array[i]->reg_addr = port_array[0]->reg_addr;
3504 alloc_dma_bufs(port_array[i]);
3505 }
3506
3507 if (request_irq(port_array[0]->irq_level,
3508 slgt_interrupt,
3509 port_array[0]->irq_flags,
3510 port_array[0]->device_name,
3511 port_array[0]) < 0) {
3512 DBGERR(("%s request_irq failed IRQ=%d\n",
3513 port_array[0]->device_name,
3514 port_array[0]->irq_level));
3515 } else {
3516 port_array[0]->irq_requested = true;
3517 adapter_test(port_array[0]);
3518 for (i=1 ; i < port_count ; i++) {
3519 port_array[i]->init_error = port_array[0]->init_error;
3520 port_array[i]->gpio_present = port_array[0]->gpio_present;
3521 }
3522 }
3523 }
3524
3525 for (i=0; i < port_count; ++i)
3526 tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
3527 }
3528
3529 static int __devinit init_one(struct pci_dev *dev,
3530 const struct pci_device_id *ent)
3531 {
3532 if (pci_enable_device(dev)) {
3533 printk("error enabling pci device %p\n", dev);
3534 return -EIO;
3535 }
3536 pci_set_master(dev);
3537 device_init(slgt_device_count, dev);
3538 return 0;
3539 }
3540
3541 static void __devexit remove_one(struct pci_dev *dev)
3542 {
3543 }
3544
3545 static const struct tty_operations ops = {
3546 .open = open,
3547 .close = close,
3548 .write = write,
3549 .put_char = put_char,
3550 .flush_chars = flush_chars,
3551 .write_room = write_room,
3552 .chars_in_buffer = chars_in_buffer,
3553 .flush_buffer = flush_buffer,
3554 .ioctl = ioctl,
3555 .compat_ioctl = slgt_compat_ioctl,
3556 .throttle = throttle,
3557 .unthrottle = unthrottle,
3558 .send_xchar = send_xchar,
3559 .break_ctl = set_break,
3560 .wait_until_sent = wait_until_sent,
3561 .read_proc = read_proc,
3562 .set_termios = set_termios,
3563 .stop = tx_hold,
3564 .start = tx_release,
3565 .hangup = hangup,
3566 .tiocmget = tiocmget,
3567 .tiocmset = tiocmset,
3568 };
3569
3570 static void slgt_cleanup(void)
3571 {
3572 int rc;
3573 struct slgt_info *info;
3574 struct slgt_info *tmp;
3575
3576 printk(KERN_INFO "unload %s\n", driver_name);
3577
3578 if (serial_driver) {
3579 for (info=slgt_device_list ; info != NULL ; info=info->next_device)
3580 tty_unregister_device(serial_driver, info->line);
3581 if ((rc = tty_unregister_driver(serial_driver)))
3582 DBGERR(("tty_unregister_driver error=%d\n", rc));
3583 put_tty_driver(serial_driver);
3584 }
3585
3586 /* reset devices */
3587 info = slgt_device_list;
3588 while(info) {
3589 reset_port(info);
3590 info = info->next_device;
3591 }
3592
3593 /* release devices */
3594 info = slgt_device_list;
3595 while(info) {
3596 #if SYNCLINK_GENERIC_HDLC
3597 hdlcdev_exit(info);
3598 #endif
3599 free_dma_bufs(info);
3600 free_tmp_rbuf(info);
3601 if (info->port_num == 0)
3602 release_resources(info);
3603 tmp = info;
3604 info = info->next_device;
3605 kfree(tmp);
3606 }
3607
3608 if (pci_registered)
3609 pci_unregister_driver(&pci_driver);
3610 }
3611
3612 /*
3613 * Driver initialization entry point.
3614 */
3615 static int __init slgt_init(void)
3616 {
3617 int rc;
3618
3619 printk(KERN_INFO "%s\n", driver_name);
3620
3621 serial_driver = alloc_tty_driver(MAX_DEVICES);
3622 if (!serial_driver) {
3623 printk("%s can't allocate tty driver\n", driver_name);
3624 return -ENOMEM;
3625 }
3626
3627 /* Initialize the tty_driver structure */
3628
3629 serial_driver->owner = THIS_MODULE;
3630 serial_driver->driver_name = tty_driver_name;
3631 serial_driver->name = tty_dev_prefix;
3632 serial_driver->major = ttymajor;
3633 serial_driver->minor_start = 64;
3634 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3635 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3636 serial_driver->init_termios = tty_std_termios;
3637 serial_driver->init_termios.c_cflag =
3638 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3639 serial_driver->init_termios.c_ispeed = 9600;
3640 serial_driver->init_termios.c_ospeed = 9600;
3641 serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3642 tty_set_operations(serial_driver, &ops);
3643 if ((rc = tty_register_driver(serial_driver)) < 0) {
3644 DBGERR(("%s can't register serial driver\n", driver_name));
3645 put_tty_driver(serial_driver);
3646 serial_driver = NULL;
3647 goto error;
3648 }
3649
3650 printk(KERN_INFO "%s, tty major#%d\n",
3651 driver_name, serial_driver->major);
3652
3653 slgt_device_count = 0;
3654 if ((rc = pci_register_driver(&pci_driver)) < 0) {
3655 printk("%s pci_register_driver error=%d\n", driver_name, rc);
3656 goto error;
3657 }
3658 pci_registered = true;
3659
3660 if (!slgt_device_list)
3661 printk("%s no devices found\n",driver_name);
3662
3663 return 0;
3664
3665 error:
3666 slgt_cleanup();
3667 return rc;
3668 }
3669
3670 static void __exit slgt_exit(void)
3671 {
3672 slgt_cleanup();
3673 }
3674
3675 module_init(slgt_init);
3676 module_exit(slgt_exit);
3677
3678 /*
3679 * register access routines
3680 */
3681
3682 #define CALC_REGADDR() \
3683 unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
3684 if (addr >= 0x80) \
3685 reg_addr += (info->port_num) * 32;
3686
3687 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
3688 {
3689 CALC_REGADDR();
3690 return readb((void __iomem *)reg_addr);
3691 }
3692
3693 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
3694 {
3695 CALC_REGADDR();
3696 writeb(value, (void __iomem *)reg_addr);
3697 }
3698
3699 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
3700 {
3701 CALC_REGADDR();
3702 return readw((void __iomem *)reg_addr);
3703 }
3704
3705 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
3706 {
3707 CALC_REGADDR();
3708 writew(value, (void __iomem *)reg_addr);
3709 }
3710
3711 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
3712 {
3713 CALC_REGADDR();
3714 return readl((void __iomem *)reg_addr);
3715 }
3716
3717 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
3718 {
3719 CALC_REGADDR();
3720 writel(value, (void __iomem *)reg_addr);
3721 }
3722
3723 static void rdma_reset(struct slgt_info *info)
3724 {
3725 unsigned int i;
3726
3727 /* set reset bit */
3728 wr_reg32(info, RDCSR, BIT1);
3729
3730 /* wait for enable bit cleared */
3731 for(i=0 ; i < 1000 ; i++)
3732 if (!(rd_reg32(info, RDCSR) & BIT0))
3733 break;
3734 }
3735
3736 static void tdma_reset(struct slgt_info *info)
3737 {
3738 unsigned int i;
3739
3740 /* set reset bit */
3741 wr_reg32(info, TDCSR, BIT1);
3742
3743 /* wait for enable bit cleared */
3744 for(i=0 ; i < 1000 ; i++)
3745 if (!(rd_reg32(info, TDCSR) & BIT0))
3746 break;
3747 }
3748
3749 /*
3750 * enable internal loopback
3751 * TxCLK and RxCLK are generated from BRG
3752 * and TxD is looped back to RxD internally.
3753 */
3754 static void enable_loopback(struct slgt_info *info)
3755 {
3756 /* SCR (serial control) BIT2=looopback enable */
3757 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
3758
3759 if (info->params.mode != MGSL_MODE_ASYNC) {
3760 /* CCR (clock control)
3761 * 07..05 tx clock source (010 = BRG)
3762 * 04..02 rx clock source (010 = BRG)
3763 * 01 auxclk enable (0 = disable)
3764 * 00 BRG enable (1 = enable)
3765 *
3766 * 0100 1001
3767 */
3768 wr_reg8(info, CCR, 0x49);
3769
3770 /* set speed if available, otherwise use default */
3771 if (info->params.clock_speed)
3772 set_rate(info, info->params.clock_speed);
3773 else
3774 set_rate(info, 3686400);
3775 }
3776 }
3777
3778 /*
3779 * set baud rate generator to specified rate
3780 */
3781 static void set_rate(struct slgt_info *info, u32 rate)
3782 {
3783 unsigned int div;
3784 static unsigned int osc = 14745600;
3785
3786 /* div = osc/rate - 1
3787 *
3788 * Round div up if osc/rate is not integer to
3789 * force to next slowest rate.
3790 */
3791
3792 if (rate) {
3793 div = osc/rate;
3794 if (!(osc % rate) && div)
3795 div--;
3796 wr_reg16(info, BDR, (unsigned short)div);
3797 }
3798 }
3799
3800 static void rx_stop(struct slgt_info *info)
3801 {
3802 unsigned short val;
3803
3804 /* disable and reset receiver */
3805 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3806 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3807 wr_reg16(info, RCR, val); /* clear reset bit */
3808
3809 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
3810
3811 /* clear pending rx interrupts */
3812 wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
3813
3814 rdma_reset(info);
3815
3816 info->rx_enabled = false;
3817 info->rx_restart = false;
3818 }
3819
3820 static void rx_start(struct slgt_info *info)
3821 {
3822 unsigned short val;
3823
3824 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
3825
3826 /* clear pending rx overrun IRQ */
3827 wr_reg16(info, SSR, IRQ_RXOVER);
3828
3829 /* reset and disable receiver */
3830 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3831 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3832 wr_reg16(info, RCR, val); /* clear reset bit */
3833
3834 rdma_reset(info);
3835 reset_rbufs(info);
3836
3837 /* set 1st descriptor address */
3838 wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
3839
3840 if (info->params.mode != MGSL_MODE_ASYNC) {
3841 /* enable rx DMA and DMA interrupt */
3842 wr_reg32(info, RDCSR, (BIT2 + BIT0));
3843 } else {
3844 /* enable saving of rx status, rx DMA and DMA interrupt */
3845 wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
3846 }
3847
3848 slgt_irq_on(info, IRQ_RXOVER);
3849
3850 /* enable receiver */
3851 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
3852
3853 info->rx_restart = false;
3854 info->rx_enabled = true;
3855 }
3856
3857 static void tx_start(struct slgt_info *info)
3858 {
3859 if (!info->tx_enabled) {
3860 wr_reg16(info, TCR,
3861 (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
3862 info->tx_enabled = true;
3863 }
3864
3865 if (info->tx_count) {
3866 info->drop_rts_on_tx_done = false;
3867
3868 if (info->params.mode != MGSL_MODE_ASYNC) {
3869 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3870 get_signals(info);
3871 if (!(info->signals & SerialSignal_RTS)) {
3872 info->signals |= SerialSignal_RTS;
3873 set_signals(info);
3874 info->drop_rts_on_tx_done = true;
3875 }
3876 }
3877
3878 slgt_irq_off(info, IRQ_TXDATA);
3879 slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
3880 /* clear tx idle and underrun status bits */
3881 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3882 if (info->params.mode == MGSL_MODE_HDLC)
3883 mod_timer(&info->tx_timer, jiffies +
3884 msecs_to_jiffies(5000));
3885 } else {
3886 slgt_irq_off(info, IRQ_TXDATA);
3887 slgt_irq_on(info, IRQ_TXIDLE);
3888 /* clear tx idle status bit */
3889 wr_reg16(info, SSR, IRQ_TXIDLE);
3890 }
3891 tdma_start(info);
3892 info->tx_active = true;
3893 }
3894 }
3895
3896 /*
3897 * start transmit DMA if inactive and there are unsent buffers
3898 */
3899 static void tdma_start(struct slgt_info *info)
3900 {
3901 unsigned int i;
3902
3903 if (rd_reg32(info, TDCSR) & BIT0)
3904 return;
3905
3906 /* transmit DMA inactive, check for unsent buffers */
3907 i = info->tbuf_start;
3908 while (!desc_count(info->tbufs[i])) {
3909 if (++i == info->tbuf_count)
3910 i = 0;
3911 if (i == info->tbuf_current)
3912 return;
3913 }
3914 info->tbuf_start = i;
3915
3916 /* there are unsent buffers, start transmit DMA */
3917
3918 /* reset needed if previous error condition */
3919 tdma_reset(info);
3920
3921 /* set 1st descriptor address */
3922 wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
3923 wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
3924 }
3925
3926 static void tx_stop(struct slgt_info *info)
3927 {
3928 unsigned short val;
3929
3930 del_timer(&info->tx_timer);
3931
3932 tdma_reset(info);
3933
3934 /* reset and disable transmitter */
3935 val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */
3936 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
3937
3938 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
3939
3940 /* clear tx idle and underrun status bit */
3941 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3942
3943 reset_tbufs(info);
3944
3945 info->tx_enabled = false;
3946 info->tx_active = false;
3947 }
3948
3949 static void reset_port(struct slgt_info *info)
3950 {
3951 if (!info->reg_addr)
3952 return;
3953
3954 tx_stop(info);
3955 rx_stop(info);
3956
3957 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
3958 set_signals(info);
3959
3960 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3961 }
3962
3963 static void reset_adapter(struct slgt_info *info)
3964 {
3965 int i;
3966 for (i=0; i < info->port_count; ++i) {
3967 if (info->port_array[i])
3968 reset_port(info->port_array[i]);
3969 }
3970 }
3971
3972 static void async_mode(struct slgt_info *info)
3973 {
3974 unsigned short val;
3975
3976 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3977 tx_stop(info);
3978 rx_stop(info);
3979
3980 /* TCR (tx control)
3981 *
3982 * 15..13 mode, 010=async
3983 * 12..10 encoding, 000=NRZ
3984 * 09 parity enable
3985 * 08 1=odd parity, 0=even parity
3986 * 07 1=RTS driver control
3987 * 06 1=break enable
3988 * 05..04 character length
3989 * 00=5 bits
3990 * 01=6 bits
3991 * 10=7 bits
3992 * 11=8 bits
3993 * 03 0=1 stop bit, 1=2 stop bits
3994 * 02 reset
3995 * 01 enable
3996 * 00 auto-CTS enable
3997 */
3998 val = 0x4000;
3999
4000 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4001 val |= BIT7;
4002
4003 if (info->params.parity != ASYNC_PARITY_NONE) {
4004 val |= BIT9;
4005 if (info->params.parity == ASYNC_PARITY_ODD)
4006 val |= BIT8;
4007 }
4008
4009 switch (info->params.data_bits)
4010 {
4011 case 6: val |= BIT4; break;
4012 case 7: val |= BIT5; break;
4013 case 8: val |= BIT5 + BIT4; break;
4014 }
4015
4016 if (info->params.stop_bits != 1)
4017 val |= BIT3;
4018
4019 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4020 val |= BIT0;
4021
4022 wr_reg16(info, TCR, val);
4023
4024 /* RCR (rx control)
4025 *
4026 * 15..13 mode, 010=async
4027 * 12..10 encoding, 000=NRZ
4028 * 09 parity enable
4029 * 08 1=odd parity, 0=even parity
4030 * 07..06 reserved, must be 0
4031 * 05..04 character length
4032 * 00=5 bits
4033 * 01=6 bits
4034 * 10=7 bits
4035 * 11=8 bits
4036 * 03 reserved, must be zero
4037 * 02 reset
4038 * 01 enable
4039 * 00 auto-DCD enable
4040 */
4041 val = 0x4000;
4042
4043 if (info->params.parity != ASYNC_PARITY_NONE) {
4044 val |= BIT9;
4045 if (info->params.parity == ASYNC_PARITY_ODD)
4046 val |= BIT8;
4047 }
4048
4049 switch (info->params.data_bits)
4050 {
4051 case 6: val |= BIT4; break;
4052 case 7: val |= BIT5; break;
4053 case 8: val |= BIT5 + BIT4; break;
4054 }
4055
4056 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4057 val |= BIT0;
4058
4059 wr_reg16(info, RCR, val);
4060
4061 /* CCR (clock control)
4062 *
4063 * 07..05 011 = tx clock source is BRG/16
4064 * 04..02 010 = rx clock source is BRG
4065 * 01 0 = auxclk disabled
4066 * 00 1 = BRG enabled
4067 *
4068 * 0110 1001
4069 */
4070 wr_reg8(info, CCR, 0x69);
4071
4072 msc_set_vcr(info);
4073
4074 /* SCR (serial control)
4075 *
4076 * 15 1=tx req on FIFO half empty
4077 * 14 1=rx req on FIFO half full
4078 * 13 tx data IRQ enable
4079 * 12 tx idle IRQ enable
4080 * 11 rx break on IRQ enable
4081 * 10 rx data IRQ enable
4082 * 09 rx break off IRQ enable
4083 * 08 overrun IRQ enable
4084 * 07 DSR IRQ enable
4085 * 06 CTS IRQ enable
4086 * 05 DCD IRQ enable
4087 * 04 RI IRQ enable
4088 * 03 reserved, must be zero
4089 * 02 1=txd->rxd internal loopback enable
4090 * 01 reserved, must be zero
4091 * 00 1=master IRQ enable
4092 */
4093 val = BIT15 + BIT14 + BIT0;
4094 wr_reg16(info, SCR, val);
4095
4096 slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
4097
4098 set_rate(info, info->params.data_rate * 16);
4099
4100 if (info->params.loopback)
4101 enable_loopback(info);
4102 }
4103
4104 static void sync_mode(struct slgt_info *info)
4105 {
4106 unsigned short val;
4107
4108 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4109 tx_stop(info);
4110 rx_stop(info);
4111
4112 /* TCR (tx control)
4113 *
4114 * 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4115 * 12..10 encoding
4116 * 09 CRC enable
4117 * 08 CRC32
4118 * 07 1=RTS driver control
4119 * 06 preamble enable
4120 * 05..04 preamble length
4121 * 03 share open/close flag
4122 * 02 reset
4123 * 01 enable
4124 * 00 auto-CTS enable
4125 */
4126 val = BIT2;
4127
4128 switch(info->params.mode) {
4129 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4130 case MGSL_MODE_BISYNC: val |= BIT15; break;
4131 case MGSL_MODE_RAW: val |= BIT13; break;
4132 }
4133 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4134 val |= BIT7;
4135
4136 switch(info->params.encoding)
4137 {
4138 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4139 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4140 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4141 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4142 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4143 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4144 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4145 }
4146
4147 switch (info->params.crc_type & HDLC_CRC_MASK)
4148 {
4149 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4150 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4151 }
4152
4153 if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
4154 val |= BIT6;
4155
4156 switch (info->params.preamble_length)
4157 {
4158 case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
4159 case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
4160 case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
4161 }
4162
4163 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4164 val |= BIT0;
4165
4166 wr_reg16(info, TCR, val);
4167
4168 /* TPR (transmit preamble) */
4169
4170 switch (info->params.preamble)
4171 {
4172 case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
4173 case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
4174 case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
4175 case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break;
4176 case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break;
4177 default: val = 0x7e; break;
4178 }
4179 wr_reg8(info, TPR, (unsigned char)val);
4180
4181 /* RCR (rx control)
4182 *
4183 * 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4184 * 12..10 encoding
4185 * 09 CRC enable
4186 * 08 CRC32
4187 * 07..03 reserved, must be 0
4188 * 02 reset
4189 * 01 enable
4190 * 00 auto-DCD enable
4191 */
4192 val = 0;
4193
4194 switch(info->params.mode) {
4195 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4196 case MGSL_MODE_BISYNC: val |= BIT15; break;
4197 case MGSL_MODE_RAW: val |= BIT13; break;
4198 }
4199
4200 switch(info->params.encoding)
4201 {
4202 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4203 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4204 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4205 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4206 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4207 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4208 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4209 }
4210
4211 switch (info->params.crc_type & HDLC_CRC_MASK)
4212 {
4213 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4214 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4215 }
4216
4217 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4218 val |= BIT0;
4219
4220 wr_reg16(info, RCR, val);
4221
4222 /* CCR (clock control)
4223 *
4224 * 07..05 tx clock source
4225 * 04..02 rx clock source
4226 * 01 auxclk enable
4227 * 00 BRG enable
4228 */
4229 val = 0;
4230
4231 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4232 {
4233 // when RxC source is DPLL, BRG generates 16X DPLL
4234 // reference clock, so take TxC from BRG/16 to get
4235 // transmit clock at actual data rate
4236 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4237 val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */
4238 else
4239 val |= BIT6; /* 010, txclk = BRG */
4240 }
4241 else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4242 val |= BIT7; /* 100, txclk = DPLL Input */
4243 else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4244 val |= BIT5; /* 001, txclk = RXC Input */
4245
4246 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4247 val |= BIT3; /* 010, rxclk = BRG */
4248 else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4249 val |= BIT4; /* 100, rxclk = DPLL */
4250 else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4251 val |= BIT2; /* 001, rxclk = TXC Input */
4252
4253 if (info->params.clock_speed)
4254 val |= BIT1 + BIT0;
4255
4256 wr_reg8(info, CCR, (unsigned char)val);
4257
4258 if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
4259 {
4260 // program DPLL mode
4261 switch(info->params.encoding)
4262 {
4263 case HDLC_ENCODING_BIPHASE_MARK:
4264 case HDLC_ENCODING_BIPHASE_SPACE:
4265 val = BIT7; break;
4266 case HDLC_ENCODING_BIPHASE_LEVEL:
4267 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
4268 val = BIT7 + BIT6; break;
4269 default: val = BIT6; // NRZ encodings
4270 }
4271 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
4272
4273 // DPLL requires a 16X reference clock from BRG
4274 set_rate(info, info->params.clock_speed * 16);
4275 }
4276 else
4277 set_rate(info, info->params.clock_speed);
4278
4279 tx_set_idle(info);
4280
4281 msc_set_vcr(info);
4282
4283 /* SCR (serial control)
4284 *
4285 * 15 1=tx req on FIFO half empty
4286 * 14 1=rx req on FIFO half full
4287 * 13 tx data IRQ enable
4288 * 12 tx idle IRQ enable
4289 * 11 underrun IRQ enable
4290 * 10 rx data IRQ enable
4291 * 09 rx idle IRQ enable
4292 * 08 overrun IRQ enable
4293 * 07 DSR IRQ enable
4294 * 06 CTS IRQ enable
4295 * 05 DCD IRQ enable
4296 * 04 RI IRQ enable
4297 * 03 reserved, must be zero
4298 * 02 1=txd->rxd internal loopback enable
4299 * 01 reserved, must be zero
4300 * 00 1=master IRQ enable
4301 */
4302 wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
4303
4304 if (info->params.loopback)
4305 enable_loopback(info);
4306 }
4307
4308 /*
4309 * set transmit idle mode
4310 */
4311 static void tx_set_idle(struct slgt_info *info)
4312 {
4313 unsigned char val;
4314 unsigned short tcr;
4315
4316 /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
4317 * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
4318 */
4319 tcr = rd_reg16(info, TCR);
4320 if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
4321 /* disable preamble, set idle size to 16 bits */
4322 tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
4323 /* MSB of 16 bit idle specified in tx preamble register (TPR) */
4324 wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
4325 } else if (!(tcr & BIT6)) {
4326 /* preamble is disabled, set idle size to 8 bits */
4327 tcr &= ~(BIT5 + BIT4);
4328 }
4329 wr_reg16(info, TCR, tcr);
4330
4331 if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
4332 /* LSB of custom tx idle specified in tx idle register */
4333 val = (unsigned char)(info->idle_mode & 0xff);
4334 } else {
4335 /* standard 8 bit idle patterns */
4336 switch(info->idle_mode)
4337 {
4338 case HDLC_TXIDLE_FLAGS: val = 0x7e; break;
4339 case HDLC_TXIDLE_ALT_ZEROS_ONES:
4340 case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
4341 case HDLC_TXIDLE_ZEROS:
4342 case HDLC_TXIDLE_SPACE: val = 0x00; break;
4343 default: val = 0xff;
4344 }
4345 }
4346
4347 wr_reg8(info, TIR, val);
4348 }
4349
4350 /*
4351 * get state of V24 status (input) signals
4352 */
4353 static void get_signals(struct slgt_info *info)
4354 {
4355 unsigned short status = rd_reg16(info, SSR);
4356
4357 /* clear all serial signals except DTR and RTS */
4358 info->signals &= SerialSignal_DTR + SerialSignal_RTS;
4359
4360 if (status & BIT3)
4361 info->signals |= SerialSignal_DSR;
4362 if (status & BIT2)
4363 info->signals |= SerialSignal_CTS;
4364 if (status & BIT1)
4365 info->signals |= SerialSignal_DCD;
4366 if (status & BIT0)
4367 info->signals |= SerialSignal_RI;
4368 }
4369
4370 /*
4371 * set V.24 Control Register based on current configuration
4372 */
4373 static void msc_set_vcr(struct slgt_info *info)
4374 {
4375 unsigned char val = 0;
4376
4377 /* VCR (V.24 control)
4378 *
4379 * 07..04 serial IF select
4380 * 03 DTR
4381 * 02 RTS
4382 * 01 LL
4383 * 00 RL
4384 */
4385
4386 switch(info->if_mode & MGSL_INTERFACE_MASK)
4387 {
4388 case MGSL_INTERFACE_RS232:
4389 val |= BIT5; /* 0010 */
4390 break;
4391 case MGSL_INTERFACE_V35:
4392 val |= BIT7 + BIT6 + BIT5; /* 1110 */
4393 break;
4394 case MGSL_INTERFACE_RS422:
4395 val |= BIT6; /* 0100 */
4396 break;
4397 }
4398
4399 if (info->if_mode & MGSL_INTERFACE_MSB_FIRST)
4400 val |= BIT4;
4401 if (info->signals & SerialSignal_DTR)
4402 val |= BIT3;
4403 if (info->signals & SerialSignal_RTS)
4404 val |= BIT2;
4405 if (info->if_mode & MGSL_INTERFACE_LL)
4406 val |= BIT1;
4407 if (info->if_mode & MGSL_INTERFACE_RL)
4408 val |= BIT0;
4409 wr_reg8(info, VCR, val);
4410 }
4411
4412 /*
4413 * set state of V24 control (output) signals
4414 */
4415 static void set_signals(struct slgt_info *info)
4416 {
4417 unsigned char val = rd_reg8(info, VCR);
4418 if (info->signals & SerialSignal_DTR)
4419 val |= BIT3;
4420 else
4421 val &= ~BIT3;
4422 if (info->signals & SerialSignal_RTS)
4423 val |= BIT2;
4424 else
4425 val &= ~BIT2;
4426 wr_reg8(info, VCR, val);
4427 }
4428
4429 /*
4430 * free range of receive DMA buffers (i to last)
4431 */
4432 static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
4433 {
4434 int done = 0;
4435
4436 while(!done) {
4437 /* reset current buffer for reuse */
4438 info->rbufs[i].status = 0;
4439 set_desc_count(info->rbufs[i], info->rbuf_fill_level);
4440 if (i == last)
4441 done = 1;
4442 if (++i == info->rbuf_count)
4443 i = 0;
4444 }
4445 info->rbuf_current = i;
4446 }
4447
4448 /*
4449 * mark all receive DMA buffers as free
4450 */
4451 static void reset_rbufs(struct slgt_info *info)
4452 {
4453 free_rbufs(info, 0, info->rbuf_count - 1);
4454 }
4455
4456 /*
4457 * pass receive HDLC frame to upper layer
4458 *
4459 * return true if frame available, otherwise false
4460 */
4461 static bool rx_get_frame(struct slgt_info *info)
4462 {
4463 unsigned int start, end;
4464 unsigned short status;
4465 unsigned int framesize = 0;
4466 unsigned long flags;
4467 struct tty_struct *tty = info->port.tty;
4468 unsigned char addr_field = 0xff;
4469 unsigned int crc_size = 0;
4470
4471 switch (info->params.crc_type & HDLC_CRC_MASK) {
4472 case HDLC_CRC_16_CCITT: crc_size = 2; break;
4473 case HDLC_CRC_32_CCITT: crc_size = 4; break;
4474 }
4475
4476 check_again:
4477
4478 framesize = 0;
4479 addr_field = 0xff;
4480 start = end = info->rbuf_current;
4481
4482 for (;;) {
4483 if (!desc_complete(info->rbufs[end]))
4484 goto cleanup;
4485
4486 if (framesize == 0 && info->params.addr_filter != 0xff)
4487 addr_field = info->rbufs[end].buf[0];
4488
4489 framesize += desc_count(info->rbufs[end]);
4490
4491 if (desc_eof(info->rbufs[end]))
4492 break;
4493
4494 if (++end == info->rbuf_count)
4495 end = 0;
4496
4497 if (end == info->rbuf_current) {
4498 if (info->rx_enabled){
4499 spin_lock_irqsave(&info->lock,flags);
4500 rx_start(info);
4501 spin_unlock_irqrestore(&info->lock,flags);
4502 }
4503 goto cleanup;
4504 }
4505 }
4506
4507 /* status
4508 *
4509 * 15 buffer complete
4510 * 14..06 reserved
4511 * 05..04 residue
4512 * 02 eof (end of frame)
4513 * 01 CRC error
4514 * 00 abort
4515 */
4516 status = desc_status(info->rbufs[end]);
4517
4518 /* ignore CRC bit if not using CRC (bit is undefined) */
4519 if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
4520 status &= ~BIT1;
4521
4522 if (framesize == 0 ||
4523 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4524 free_rbufs(info, start, end);
4525 goto check_again;
4526 }
4527
4528 if (framesize < (2 + crc_size) || status & BIT0) {
4529 info->icount.rxshort++;
4530 framesize = 0;
4531 } else if (status & BIT1) {
4532 info->icount.rxcrc++;
4533 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
4534 framesize = 0;
4535 }
4536
4537 #if SYNCLINK_GENERIC_HDLC
4538 if (framesize == 0) {
4539 info->netdev->stats.rx_errors++;
4540 info->netdev->stats.rx_frame_errors++;
4541 }
4542 #endif
4543
4544 DBGBH(("%s rx frame status=%04X size=%d\n",
4545 info->device_name, status, framesize));
4546 DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx");
4547
4548 if (framesize) {
4549 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
4550 framesize -= crc_size;
4551 crc_size = 0;
4552 }
4553
4554 if (framesize > info->max_frame_size + crc_size)
4555 info->icount.rxlong++;
4556 else {
4557 /* copy dma buffer(s) to contiguous temp buffer */
4558 int copy_count = framesize;
4559 int i = start;
4560 unsigned char *p = info->tmp_rbuf;
4561 info->tmp_rbuf_count = framesize;
4562
4563 info->icount.rxok++;
4564
4565 while(copy_count) {
4566 int partial_count = min_t(int, copy_count, info->rbuf_fill_level);
4567 memcpy(p, info->rbufs[i].buf, partial_count);
4568 p += partial_count;
4569 copy_count -= partial_count;
4570 if (++i == info->rbuf_count)
4571 i = 0;
4572 }
4573
4574 if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
4575 *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
4576 framesize++;
4577 }
4578
4579 #if SYNCLINK_GENERIC_HDLC
4580 if (info->netcount)
4581 hdlcdev_rx(info,info->tmp_rbuf, framesize);
4582 else
4583 #endif
4584 ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
4585 }
4586 }
4587 free_rbufs(info, start, end);
4588 return true;
4589
4590 cleanup:
4591 return false;
4592 }
4593
4594 /*
4595 * pass receive buffer (RAW synchronous mode) to tty layer
4596 * return true if buffer available, otherwise false
4597 */
4598 static bool rx_get_buf(struct slgt_info *info)
4599 {
4600 unsigned int i = info->rbuf_current;
4601 unsigned int count;
4602
4603 if (!desc_complete(info->rbufs[i]))
4604 return false;
4605 count = desc_count(info->rbufs[i]);
4606 switch(info->params.mode) {
4607 case MGSL_MODE_MONOSYNC:
4608 case MGSL_MODE_BISYNC:
4609 /* ignore residue in byte synchronous modes */
4610 if (desc_residue(info->rbufs[i]))
4611 count--;
4612 break;
4613 }
4614 DBGDATA(info, info->rbufs[i].buf, count, "rx");
4615 DBGINFO(("rx_get_buf size=%d\n", count));
4616 if (count)
4617 ldisc_receive_buf(info->port.tty, info->rbufs[i].buf,
4618 info->flag_buf, count);
4619 free_rbufs(info, i, i);
4620 return true;
4621 }
4622
4623 static void reset_tbufs(struct slgt_info *info)
4624 {
4625 unsigned int i;
4626 info->tbuf_current = 0;
4627 for (i=0 ; i < info->tbuf_count ; i++) {
4628 info->tbufs[i].status = 0;
4629 info->tbufs[i].count = 0;
4630 }
4631 }
4632
4633 /*
4634 * return number of free transmit DMA buffers
4635 */
4636 static unsigned int free_tbuf_count(struct slgt_info *info)
4637 {
4638 unsigned int count = 0;
4639 unsigned int i = info->tbuf_current;
4640
4641 do
4642 {
4643 if (desc_count(info->tbufs[i]))
4644 break; /* buffer in use */
4645 ++count;
4646 if (++i == info->tbuf_count)
4647 i=0;
4648 } while (i != info->tbuf_current);
4649
4650 /* if tx DMA active, last zero count buffer is in use */
4651 if (count && (rd_reg32(info, TDCSR) & BIT0))
4652 --count;
4653
4654 return count;
4655 }
4656
4657 /*
4658 * return number of bytes in unsent transmit DMA buffers
4659 * and the serial controller tx FIFO
4660 */
4661 static unsigned int tbuf_bytes(struct slgt_info *info)
4662 {
4663 unsigned int total_count = 0;
4664 unsigned int i = info->tbuf_current;
4665 unsigned int reg_value;
4666 unsigned int count;
4667 unsigned int active_buf_count = 0;
4668
4669 /*
4670 * Add descriptor counts for all tx DMA buffers.
4671 * If count is zero (cleared by DMA controller after read),
4672 * the buffer is complete or is actively being read from.
4673 *
4674 * Record buf_count of last buffer with zero count starting
4675 * from current ring position. buf_count is mirror
4676 * copy of count and is not cleared by serial controller.
4677 * If DMA controller is active, that buffer is actively
4678 * being read so add to total.
4679 */
4680 do {
4681 count = desc_count(info->tbufs[i]);
4682 if (count)
4683 total_count += count;
4684 else if (!total_count)
4685 active_buf_count = info->tbufs[i].buf_count;
4686 if (++i == info->tbuf_count)
4687 i = 0;
4688 } while (i != info->tbuf_current);
4689
4690 /* read tx DMA status register */
4691 reg_value = rd_reg32(info, TDCSR);
4692
4693 /* if tx DMA active, last zero count buffer is in use */
4694 if (reg_value & BIT0)
4695 total_count += active_buf_count;
4696
4697 /* add tx FIFO count = reg_value[15..8] */
4698 total_count += (reg_value >> 8) & 0xff;
4699
4700 /* if transmitter active add one byte for shift register */
4701 if (info->tx_active)
4702 total_count++;
4703
4704 return total_count;
4705 }
4706
4707 /*
4708 * load transmit DMA buffer(s) with data
4709 */
4710 static void tx_load(struct slgt_info *info, const char *buf, unsigned int size)
4711 {
4712 unsigned short count;
4713 unsigned int i;
4714 struct slgt_desc *d;
4715
4716 if (size == 0)
4717 return;
4718
4719 DBGDATA(info, buf, size, "tx");
4720
4721 info->tbuf_start = i = info->tbuf_current;
4722
4723 while (size) {
4724 d = &info->tbufs[i];
4725 if (++i == info->tbuf_count)
4726 i = 0;
4727
4728 count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
4729 memcpy(d->buf, buf, count);
4730
4731 size -= count;
4732 buf += count;
4733
4734 /*
4735 * set EOF bit for last buffer of HDLC frame or
4736 * for every buffer in raw mode
4737 */
4738 if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
4739 info->params.mode == MGSL_MODE_RAW)
4740 set_desc_eof(*d, 1);
4741 else
4742 set_desc_eof(*d, 0);
4743
4744 set_desc_count(*d, count);
4745 d->buf_count = count;
4746 }
4747
4748 info->tbuf_current = i;
4749 }
4750
4751 static int register_test(struct slgt_info *info)
4752 {
4753 static unsigned short patterns[] =
4754 {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
4755 static unsigned int count = sizeof(patterns)/sizeof(patterns[0]);
4756 unsigned int i;
4757 int rc = 0;
4758
4759 for (i=0 ; i < count ; i++) {
4760 wr_reg16(info, TIR, patterns[i]);
4761 wr_reg16(info, BDR, patterns[(i+1)%count]);
4762 if ((rd_reg16(info, TIR) != patterns[i]) ||
4763 (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
4764 rc = -ENODEV;
4765 break;
4766 }
4767 }
4768 info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
4769 info->init_error = rc ? 0 : DiagStatus_AddressFailure;
4770 return rc;
4771 }
4772
4773 static int irq_test(struct slgt_info *info)
4774 {
4775 unsigned long timeout;
4776 unsigned long flags;
4777 struct tty_struct *oldtty = info->port.tty;
4778 u32 speed = info->params.data_rate;
4779
4780 info->params.data_rate = 921600;
4781 info->port.tty = NULL;
4782
4783 spin_lock_irqsave(&info->lock, flags);
4784 async_mode(info);
4785 slgt_irq_on(info, IRQ_TXIDLE);
4786
4787 /* enable transmitter */
4788 wr_reg16(info, TCR,
4789 (unsigned short)(rd_reg16(info, TCR) | BIT1));
4790
4791 /* write one byte and wait for tx idle */
4792 wr_reg16(info, TDR, 0);
4793
4794 /* assume failure */
4795 info->init_error = DiagStatus_IrqFailure;
4796 info->irq_occurred = false;
4797
4798 spin_unlock_irqrestore(&info->lock, flags);
4799
4800 timeout=100;
4801 while(timeout-- && !info->irq_occurred)
4802 msleep_interruptible(10);
4803
4804 spin_lock_irqsave(&info->lock,flags);
4805 reset_port(info);
4806 spin_unlock_irqrestore(&info->lock,flags);
4807
4808 info->params.data_rate = speed;
4809 info->port.tty = oldtty;
4810
4811 info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
4812 return info->irq_occurred ? 0 : -ENODEV;
4813 }
4814
4815 static int loopback_test_rx(struct slgt_info *info)
4816 {
4817 unsigned char *src, *dest;
4818 int count;
4819
4820 if (desc_complete(info->rbufs[0])) {
4821 count = desc_count(info->rbufs[0]);
4822 src = info->rbufs[0].buf;
4823 dest = info->tmp_rbuf;
4824
4825 for( ; count ; count-=2, src+=2) {
4826 /* src=data byte (src+1)=status byte */
4827 if (!(*(src+1) & (BIT9 + BIT8))) {
4828 *dest = *src;
4829 dest++;
4830 info->tmp_rbuf_count++;
4831 }
4832 }
4833 DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
4834 return 1;
4835 }
4836 return 0;
4837 }
4838
4839 static int loopback_test(struct slgt_info *info)
4840 {
4841 #define TESTFRAMESIZE 20
4842
4843 unsigned long timeout;
4844 u16 count = TESTFRAMESIZE;
4845 unsigned char buf[TESTFRAMESIZE];
4846 int rc = -ENODEV;
4847 unsigned long flags;
4848
4849 struct tty_struct *oldtty = info->port.tty;
4850 MGSL_PARAMS params;
4851
4852 memcpy(&params, &info->params, sizeof(params));
4853
4854 info->params.mode = MGSL_MODE_ASYNC;
4855 info->params.data_rate = 921600;
4856 info->params.loopback = 1;
4857 info->port.tty = NULL;
4858
4859 /* build and send transmit frame */
4860 for (count = 0; count < TESTFRAMESIZE; ++count)
4861 buf[count] = (unsigned char)count;
4862
4863 info->tmp_rbuf_count = 0;
4864 memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
4865
4866 /* program hardware for HDLC and enabled receiver */
4867 spin_lock_irqsave(&info->lock,flags);
4868 async_mode(info);
4869 rx_start(info);
4870 info->tx_count = count;
4871 tx_load(info, buf, count);
4872 tx_start(info);
4873 spin_unlock_irqrestore(&info->lock, flags);
4874
4875 /* wait for receive complete */
4876 for (timeout = 100; timeout; --timeout) {
4877 msleep_interruptible(10);
4878 if (loopback_test_rx(info)) {
4879 rc = 0;
4880 break;
4881 }
4882 }
4883
4884 /* verify received frame length and contents */
4885 if (!rc && (info->tmp_rbuf_count != count ||
4886 memcmp(buf, info->tmp_rbuf, count))) {
4887 rc = -ENODEV;
4888 }
4889
4890 spin_lock_irqsave(&info->lock,flags);
4891 reset_adapter(info);
4892 spin_unlock_irqrestore(&info->lock,flags);
4893
4894 memcpy(&info->params, &params, sizeof(info->params));
4895 info->port.tty = oldtty;
4896
4897 info->init_error = rc ? DiagStatus_DmaFailure : 0;
4898 return rc;
4899 }
4900
4901 static int adapter_test(struct slgt_info *info)
4902 {
4903 DBGINFO(("testing %s\n", info->device_name));
4904 if (register_test(info) < 0) {
4905 printk("register test failure %s addr=%08X\n",
4906 info->device_name, info->phys_reg_addr);
4907 } else if (irq_test(info) < 0) {
4908 printk("IRQ test failure %s IRQ=%d\n",
4909 info->device_name, info->irq_level);
4910 } else if (loopback_test(info) < 0) {
4911 printk("loopback test failure %s\n", info->device_name);
4912 }
4913 return info->init_error;
4914 }
4915
4916 /*
4917 * transmit timeout handler
4918 */
4919 static void tx_timeout(unsigned long context)
4920 {
4921 struct slgt_info *info = (struct slgt_info*)context;
4922 unsigned long flags;
4923
4924 DBGINFO(("%s tx_timeout\n", info->device_name));
4925 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
4926 info->icount.txtimeout++;
4927 }
4928 spin_lock_irqsave(&info->lock,flags);
4929 info->tx_active = false;
4930 info->tx_count = 0;
4931 spin_unlock_irqrestore(&info->lock,flags);
4932
4933 #if SYNCLINK_GENERIC_HDLC
4934 if (info->netcount)
4935 hdlcdev_tx_done(info);
4936 else
4937 #endif
4938 bh_transmit(info);
4939 }
4940
4941 /*
4942 * receive buffer polling timer
4943 */
4944 static void rx_timeout(unsigned long context)
4945 {
4946 struct slgt_info *info = (struct slgt_info*)context;
4947 unsigned long flags;
4948
4949 DBGINFO(("%s rx_timeout\n", info->device_name));
4950 spin_lock_irqsave(&info->lock, flags);
4951 info->pending_bh |= BH_RECEIVE;
4952 spin_unlock_irqrestore(&info->lock, flags);
4953 bh_handler(&info->task);
4954 }
4955
Nao low-level kernelspace/userspace library that runs on our robots, Nao-Team HTWK