| blob | e135247f7f89d6aae25fefc4bdb7673e54bfc706 |
1 /*
2 Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
21 /*
22 Module: rt2500pci
23 Abstract: Data structures and registers for the rt2500pci module.
24 Supported chipsets: RT2560.
25 */
27 #ifndef RT2500PCI_H
28 #define RT2500PCI_H
30 /*
31 * RF chip defines.
32 */
33 #define RF2522 0x0000
34 #define RF2523 0x0001
35 #define RF2524 0x0002
36 #define RF2525 0x0003
37 #define RF2525E 0x0004
38 #define RF5222 0x0010
40 /*
41 * RT2560 version
42 */
43 #define RT2560_VERSION_B 2
44 #define RT2560_VERSION_C 3
45 #define RT2560_VERSION_D 4
47 /*
48 * Signal information.
49 * Defaul offset is required for RSSI <-> dBm conversion.
50 */
51 #define DEFAULT_RSSI_OFFSET 121
53 /*
54 * Register layout information.
55 */
56 #define CSR_REG_BASE 0x0000
57 #define CSR_REG_SIZE 0x0174
58 #define EEPROM_BASE 0x0000
59 #define EEPROM_SIZE 0x0200
60 #define BBP_BASE 0x0000
61 #define BBP_SIZE 0x0040
62 #define RF_BASE 0x0000
63 #define RF_SIZE 0x0014
65 /*
66 * Number of TX queues.
67 */
68 #define NUM_TX_QUEUES 2
70 /*
71 * Control/Status Registers(CSR).
72 * Some values are set in TU, whereas 1 TU == 1024 us.
73 */
75 /*
76 * CSR0: ASIC revision number.
77 */
78 #define CSR0 0x0000
80 /*
81 * CSR1: System control register.
82 * SOFT_RESET: Software reset, 1: reset, 0: normal.
83 * BBP_RESET: Hardware reset, 1: reset, 0, release.
84 * HOST_READY: Host ready after initialization.
85 */
86 #define CSR1 0x0004
87 #define CSR1_SOFT_RESET FIELD32(0x00000001)
88 #define CSR1_BBP_RESET FIELD32(0x00000002)
89 #define CSR1_HOST_READY FIELD32(0x00000004)
91 /*
92 * CSR2: System admin status register (invalid).
93 */
94 #define CSR2 0x0008
96 /*
97 * CSR3: STA MAC address register 0.
98 */
99 #define CSR3 0x000c
100 #define CSR3_BYTE0 FIELD32(0x000000ff)
101 #define CSR3_BYTE1 FIELD32(0x0000ff00)
102 #define CSR3_BYTE2 FIELD32(0x00ff0000)
103 #define CSR3_BYTE3 FIELD32(0xff000000)
105 /*
106 * CSR4: STA MAC address register 1.
107 */
108 #define CSR4 0x0010
109 #define CSR4_BYTE4 FIELD32(0x000000ff)
110 #define CSR4_BYTE5 FIELD32(0x0000ff00)
112 /*
113 * CSR5: BSSID register 0.
114 */
115 #define CSR5 0x0014
116 #define CSR5_BYTE0 FIELD32(0x000000ff)
117 #define CSR5_BYTE1 FIELD32(0x0000ff00)
118 #define CSR5_BYTE2 FIELD32(0x00ff0000)
119 #define CSR5_BYTE3 FIELD32(0xff000000)
121 /*
122 * CSR6: BSSID register 1.
123 */
124 #define CSR6 0x0018
125 #define CSR6_BYTE4 FIELD32(0x000000ff)
126 #define CSR6_BYTE5 FIELD32(0x0000ff00)
128 /*
129 * CSR7: Interrupt source register.
130 * Write 1 to clear.
131 * TBCN_EXPIRE: Beacon timer expired interrupt.
132 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
133 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
134 * TXDONE_TXRING: Tx ring transmit done interrupt.
135 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
136 * TXDONE_PRIORING: Priority ring transmit done interrupt.
137 * RXDONE: Receive done interrupt.
138 * DECRYPTION_DONE: Decryption done interrupt.
139 * ENCRYPTION_DONE: Encryption done interrupt.
140 * UART1_TX_TRESHOLD: UART1 TX reaches threshold.
141 * UART1_RX_TRESHOLD: UART1 RX reaches threshold.
142 * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold.
143 * UART1_TX_BUFF_ERROR: UART1 TX buffer error.
144 * UART1_RX_BUFF_ERROR: UART1 RX buffer error.
145 * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
146 * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
147 * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
148 * UART2_TX_BUFF_ERROR: UART2 TX buffer error.
149 * UART2_RX_BUFF_ERROR: UART2 RX buffer error.
150 * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period).
152 */
153 #define CSR7 0x001c
154 #define CSR7_TBCN_EXPIRE FIELD32(0x00000001)
155 #define CSR7_TWAKE_EXPIRE FIELD32(0x00000002)
156 #define CSR7_TATIMW_EXPIRE FIELD32(0x00000004)
157 #define CSR7_TXDONE_TXRING FIELD32(0x00000008)
158 #define CSR7_TXDONE_ATIMRING FIELD32(0x00000010)
159 #define CSR7_TXDONE_PRIORING FIELD32(0x00000020)
160 #define CSR7_RXDONE FIELD32(0x00000040)
161 #define CSR7_DECRYPTION_DONE FIELD32(0x00000080)
162 #define CSR7_ENCRYPTION_DONE FIELD32(0x00000100)
163 #define CSR7_UART1_TX_TRESHOLD FIELD32(0x00000200)
164 #define CSR7_UART1_RX_TRESHOLD FIELD32(0x00000400)
165 #define CSR7_UART1_IDLE_TRESHOLD FIELD32(0x00000800)
166 #define CSR7_UART1_TX_BUFF_ERROR FIELD32(0x00001000)
167 #define CSR7_UART1_RX_BUFF_ERROR FIELD32(0x00002000)
168 #define CSR7_UART2_TX_TRESHOLD FIELD32(0x00004000)
169 #define CSR7_UART2_RX_TRESHOLD FIELD32(0x00008000)
170 #define CSR7_UART2_IDLE_TRESHOLD FIELD32(0x00010000)
171 #define CSR7_UART2_TX_BUFF_ERROR FIELD32(0x00020000)
172 #define CSR7_UART2_RX_BUFF_ERROR FIELD32(0x00040000)
173 #define CSR7_TIMER_CSR3_EXPIRE FIELD32(0x00080000)
175 /*
176 * CSR8: Interrupt mask register.
177 * Write 1 to mask interrupt.
178 * TBCN_EXPIRE: Beacon timer expired interrupt.
179 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
180 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
181 * TXDONE_TXRING: Tx ring transmit done interrupt.
182 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
183 * TXDONE_PRIORING: Priority ring transmit done interrupt.
184 * RXDONE: Receive done interrupt.
185 * DECRYPTION_DONE: Decryption done interrupt.
186 * ENCRYPTION_DONE: Encryption done interrupt.
187 * UART1_TX_TRESHOLD: UART1 TX reaches threshold.
188 * UART1_RX_TRESHOLD: UART1 RX reaches threshold.
189 * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold.
190 * UART1_TX_BUFF_ERROR: UART1 TX buffer error.
191 * UART1_RX_BUFF_ERROR: UART1 RX buffer error.
192 * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
193 * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
194 * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
195 * UART2_TX_BUFF_ERROR: UART2 TX buffer error.
196 * UART2_RX_BUFF_ERROR: UART2 RX buffer error.
197 * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period).
198 */
199 #define CSR8 0x0020
200 #define CSR8_TBCN_EXPIRE FIELD32(0x00000001)
201 #define CSR8_TWAKE_EXPIRE FIELD32(0x00000002)
202 #define CSR8_TATIMW_EXPIRE FIELD32(0x00000004)
203 #define CSR8_TXDONE_TXRING FIELD32(0x00000008)
204 #define CSR8_TXDONE_ATIMRING FIELD32(0x00000010)
205 #define CSR8_TXDONE_PRIORING FIELD32(0x00000020)
206 #define CSR8_RXDONE FIELD32(0x00000040)
207 #define CSR8_DECRYPTION_DONE FIELD32(0x00000080)
208 #define CSR8_ENCRYPTION_DONE FIELD32(0x00000100)
209 #define CSR8_UART1_TX_TRESHOLD FIELD32(0x00000200)
210 #define CSR8_UART1_RX_TRESHOLD FIELD32(0x00000400)
211 #define CSR8_UART1_IDLE_TRESHOLD FIELD32(0x00000800)
212 #define CSR8_UART1_TX_BUFF_ERROR FIELD32(0x00001000)
213 #define CSR8_UART1_RX_BUFF_ERROR FIELD32(0x00002000)
214 #define CSR8_UART2_TX_TRESHOLD FIELD32(0x00004000)
215 #define CSR8_UART2_RX_TRESHOLD FIELD32(0x00008000)
216 #define CSR8_UART2_IDLE_TRESHOLD FIELD32(0x00010000)
217 #define CSR8_UART2_TX_BUFF_ERROR FIELD32(0x00020000)
218 #define CSR8_UART2_RX_BUFF_ERROR FIELD32(0x00040000)
219 #define CSR8_TIMER_CSR3_EXPIRE FIELD32(0x00080000)
221 /*
222 * CSR9: Maximum frame length register.
223 * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12.
224 */
225 #define CSR9 0x0024
226 #define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80)
228 /*
229 * SECCSR0: WEP control register.
230 * KICK_DECRYPT: Kick decryption engine, self-clear.
231 * ONE_SHOT: 0: ring mode, 1: One shot only mode.
232 * DESC_ADDRESS: Descriptor physical address of frame.
233 */
234 #define SECCSR0 0x0028
235 #define SECCSR0_KICK_DECRYPT FIELD32(0x00000001)
236 #define SECCSR0_ONE_SHOT FIELD32(0x00000002)
237 #define SECCSR0_DESC_ADDRESS FIELD32(0xfffffffc)
239 /*
240 * CSR11: Back-off control register.
241 * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1).
242 * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1).
243 * SLOT_TIME: Slot time, default is 20us for 802.11b
244 * CW_SELECT: CWmin/CWmax selection, 1: Register, 0: TXD.
245 * LONG_RETRY: Long retry count.
246 * SHORT_RETRY: Short retry count.
247 */
248 #define CSR11 0x002c
249 #define CSR11_CWMIN FIELD32(0x0000000f)
250 #define CSR11_CWMAX FIELD32(0x000000f0)
251 #define CSR11_SLOT_TIME FIELD32(0x00001f00)
252 #define CSR11_CW_SELECT FIELD32(0x00002000)
253 #define CSR11_LONG_RETRY FIELD32(0x00ff0000)
254 #define CSR11_SHORT_RETRY FIELD32(0xff000000)
256 /*
257 * CSR12: Synchronization configuration register 0.
258 * All units in 1/16 TU.
259 * BEACON_INTERVAL: Beacon interval, default is 100 TU.
260 * CFP_MAX_DURATION: Cfp maximum duration, default is 100 TU.
261 */
262 #define CSR12 0x0030
263 #define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff)
264 #define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000)
266 /*
267 * CSR13: Synchronization configuration register 1.
268 * All units in 1/16 TU.
269 * ATIMW_DURATION: Atim window duration.
270 * CFP_PERIOD: Cfp period, default is 0 TU.
271 */
272 #define CSR13 0x0034
273 #define CSR13_ATIMW_DURATION FIELD32(0x0000ffff)
274 #define CSR13_CFP_PERIOD FIELD32(0x00ff0000)
276 /*
277 * CSR14: Synchronization control register.
278 * TSF_COUNT: Enable tsf auto counting.
279 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
280 * TBCN: Enable tbcn with reload value.
281 * TCFP: Enable tcfp & cfp / cp switching.
282 * TATIMW: Enable tatimw & atim window switching.
283 * BEACON_GEN: Enable beacon generator.
284 * CFP_COUNT_PRELOAD: Cfp count preload value.
285 * TBCM_PRELOAD: Tbcn preload value in units of 64us.
286 */
287 #define CSR14 0x0038
288 #define CSR14_TSF_COUNT FIELD32(0x00000001)
289 #define CSR14_TSF_SYNC FIELD32(0x00000006)
290 #define CSR14_TBCN FIELD32(0x00000008)
291 #define CSR14_TCFP FIELD32(0x00000010)
292 #define CSR14_TATIMW FIELD32(0x00000020)
293 #define CSR14_BEACON_GEN FIELD32(0x00000040)
294 #define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00)
295 #define CSR14_TBCM_PRELOAD FIELD32(0xffff0000)
297 /*
298 * CSR15: Synchronization status register.
299 * CFP: ASIC is in contention-free period.
300 * ATIMW: ASIC is in ATIM window.
301 * BEACON_SENT: Beacon is send.
302 */
303 #define CSR15 0x003c
304 #define CSR15_CFP FIELD32(0x00000001)
305 #define CSR15_ATIMW FIELD32(0x00000002)
306 #define CSR15_BEACON_SENT FIELD32(0x00000004)
308 /*
309 * CSR16: TSF timer register 0.
310 */
311 #define CSR16 0x0040
312 #define CSR16_LOW_TSFTIMER FIELD32(0xffffffff)
314 /*
315 * CSR17: TSF timer register 1.
316 */
317 #define CSR17 0x0044
318 #define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff)
320 /*
321 * CSR18: IFS timer register 0.
322 * SIFS: Sifs, default is 10 us.
323 * PIFS: Pifs, default is 30 us.
324 */
325 #define CSR18 0x0048
326 #define CSR18_SIFS FIELD32(0x000001ff)
327 #define CSR18_PIFS FIELD32(0x001f0000)
329 /*
330 * CSR19: IFS timer register 1.
331 * DIFS: Difs, default is 50 us.
332 * EIFS: Eifs, default is 364 us.
333 */
334 #define CSR19 0x004c
335 #define CSR19_DIFS FIELD32(0x0000ffff)
336 #define CSR19_EIFS FIELD32(0xffff0000)
338 /*
339 * CSR20: Wakeup timer register.
340 * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU.
341 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
342 * AUTOWAKE: Enable auto wakeup / sleep mechanism.
343 */
344 #define CSR20 0x0050
345 #define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff)
346 #define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000)
347 #define CSR20_AUTOWAKE FIELD32(0x01000000)
349 /*
350 * CSR21: EEPROM control register.
351 * RELOAD: Write 1 to reload eeprom content.
352 * TYPE_93C46: 1: 93c46, 0:93c66.
353 */
354 #define CSR21 0x0054
355 #define CSR21_RELOAD FIELD32(0x00000001)
356 #define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002)
357 #define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004)
358 #define CSR21_EEPROM_DATA_IN FIELD32(0x00000008)
359 #define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010)
360 #define CSR21_TYPE_93C46 FIELD32(0x00000020)
362 /*
363 * CSR22: CFP control register.
364 * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU.
365 * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain.
366 */
367 #define CSR22 0x0058
368 #define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff)
369 #define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000)
371 /*
372 * Transmit related CSRs.
373 * Some values are set in TU, whereas 1 TU == 1024 us.
374 */
376 /*
377 * TXCSR0: TX Control Register.
378 * KICK_TX: Kick tx ring.
379 * KICK_ATIM: Kick atim ring.
380 * KICK_PRIO: Kick priority ring.
381 * ABORT: Abort all transmit related ring operation.
382 */
383 #define TXCSR0 0x0060
384 #define TXCSR0_KICK_TX FIELD32(0x00000001)
385 #define TXCSR0_KICK_ATIM FIELD32(0x00000002)
386 #define TXCSR0_KICK_PRIO FIELD32(0x00000004)
387 #define TXCSR0_ABORT FIELD32(0x00000008)
389 /*
390 * TXCSR1: TX Configuration Register.
391 * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps.
392 * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps.
393 * TSF_OFFSET: Insert tsf offset.
394 * AUTORESPONDER: Enable auto responder which include ack & cts.
395 */
396 #define TXCSR1 0x0064
397 #define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff)
398 #define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00)
399 #define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000)
400 #define TXCSR1_AUTORESPONDER FIELD32(0x01000000)
402 /*
403 * TXCSR2: Tx descriptor configuration register.
404 * TXD_SIZE: Tx descriptor size, default is 48.
405 * NUM_TXD: Number of tx entries in ring.
406 * NUM_ATIM: Number of atim entries in ring.
407 * NUM_PRIO: Number of priority entries in ring.
408 */
409 #define TXCSR2 0x0068
410 #define TXCSR2_TXD_SIZE FIELD32(0x000000ff)
411 #define TXCSR2_NUM_TXD FIELD32(0x0000ff00)
412 #define TXCSR2_NUM_ATIM FIELD32(0x00ff0000)
413 #define TXCSR2_NUM_PRIO FIELD32(0xff000000)
415 /*
416 * TXCSR3: TX Ring Base address register.
417 */
418 #define TXCSR3 0x006c
419 #define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff)
421 /*
422 * TXCSR4: TX Atim Ring Base address register.
423 */
424 #define TXCSR4 0x0070
425 #define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff)
427 /*
428 * TXCSR5: TX Prio Ring Base address register.
429 */
430 #define TXCSR5 0x0074
431 #define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff)
433 /*
434 * TXCSR6: Beacon Base address register.
435 */
436 #define TXCSR6 0x0078
437 #define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff)
439 /*
440 * TXCSR7: Auto responder control register.
441 * AR_POWERMANAGEMENT: Auto responder power management bit.
442 */
443 #define TXCSR7 0x007c
444 #define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001)
446 /*
447 * TXCSR8: CCK Tx BBP register.
448 */
449 #define TXCSR8 0x0098
450 #define TXCSR8_BBP_ID0 FIELD32(0x0000007f)
451 #define TXCSR8_BBP_ID0_VALID FIELD32(0x00000080)
452 #define TXCSR8_BBP_ID1 FIELD32(0x00007f00)
453 #define TXCSR8_BBP_ID1_VALID FIELD32(0x00008000)
454 #define TXCSR8_BBP_ID2 FIELD32(0x007f0000)
455 #define TXCSR8_BBP_ID2_VALID FIELD32(0x00800000)
456 #define TXCSR8_BBP_ID3 FIELD32(0x7f000000)
457 #define TXCSR8_BBP_ID3_VALID FIELD32(0x80000000)
459 /*
460 * TXCSR9: OFDM TX BBP registers
461 * OFDM_SIGNAL: BBP rate field address for OFDM.
462 * OFDM_SERVICE: BBP service field address for OFDM.
463 * OFDM_LENGTH_LOW: BBP length low byte address for OFDM.
464 * OFDM_LENGTH_HIGH: BBP length high byte address for OFDM.
465 */
466 #define TXCSR9 0x0094
467 #define TXCSR9_OFDM_RATE FIELD32(0x000000ff)
468 #define TXCSR9_OFDM_SERVICE FIELD32(0x0000ff00)
469 #define TXCSR9_OFDM_LENGTH_LOW FIELD32(0x00ff0000)
470 #define TXCSR9_OFDM_LENGTH_HIGH FIELD32(0xff000000)
472 /*
473 * Receive related CSRs.
474 * Some values are set in TU, whereas 1 TU == 1024 us.
475 */
477 /*
478 * RXCSR0: RX Control Register.
479 * DISABLE_RX: Disable rx engine.
480 * DROP_CRC: Drop crc error.
481 * DROP_PHYSICAL: Drop physical error.
482 * DROP_CONTROL: Drop control frame.
483 * DROP_NOT_TO_ME: Drop not to me unicast frame.
484 * DROP_TODS: Drop frame tods bit is true.
485 * DROP_VERSION_ERROR: Drop version error frame.
486 * PASS_CRC: Pass all packets with crc attached.
487 * PASS_CRC: Pass all packets with crc attached.
488 * PASS_PLCP: Pass all packets with 4 bytes PLCP attached.
489 * DROP_MCAST: Drop multicast frames.
490 * DROP_BCAST: Drop broadcast frames.
491 * ENABLE_QOS: Accept QOS data frame and parse QOS field.
492 */
493 #define RXCSR0 0x0080
494 #define RXCSR0_DISABLE_RX FIELD32(0x00000001)
495 #define RXCSR0_DROP_CRC FIELD32(0x00000002)
496 #define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004)
497 #define RXCSR0_DROP_CONTROL FIELD32(0x00000008)
498 #define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010)
499 #define RXCSR0_DROP_TODS FIELD32(0x00000020)
500 #define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040)
501 #define RXCSR0_PASS_CRC FIELD32(0x00000080)
502 #define RXCSR0_PASS_PLCP FIELD32(0x00000100)
503 #define RXCSR0_DROP_MCAST FIELD32(0x00000200)
504 #define RXCSR0_DROP_BCAST FIELD32(0x00000400)
505 #define RXCSR0_ENABLE_QOS FIELD32(0x00000800)
507 /*
508 * RXCSR1: RX descriptor configuration register.
509 * RXD_SIZE: Rx descriptor size, default is 32b.
510 * NUM_RXD: Number of rx entries in ring.
511 */
512 #define RXCSR1 0x0084
513 #define RXCSR1_RXD_SIZE FIELD32(0x000000ff)
514 #define RXCSR1_NUM_RXD FIELD32(0x0000ff00)
516 /*
517 * RXCSR2: RX Ring base address register.
518 */
519 #define RXCSR2 0x0088
520 #define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff)
522 /*
523 * RXCSR3: BBP ID register for Rx operation.
524 * BBP_ID#: BBP register # id.
525 * BBP_ID#_VALID: BBP register # id is valid or not.
526 */
527 #define RXCSR3 0x0090
528 #define RXCSR3_BBP_ID0 FIELD32(0x0000007f)
529 #define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080)
530 #define RXCSR3_BBP_ID1 FIELD32(0x00007f00)
531 #define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000)
532 #define RXCSR3_BBP_ID2 FIELD32(0x007f0000)
533 #define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000)
534 #define RXCSR3_BBP_ID3 FIELD32(0x7f000000)
535 #define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000)
537 /*
538 * ARCSR1: Auto Responder PLCP config register 1.
539 * AR_BBP_DATA#: Auto responder BBP register # data.
540 * AR_BBP_ID#: Auto responder BBP register # Id.
541 */
542 #define ARCSR1 0x009c
543 #define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff)
544 #define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00)
545 #define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000)
546 #define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000)
548 /*
549 * Miscellaneous Registers.
550 * Some values are set in TU, whereas 1 TU == 1024 us.
552 */
554 /*
555 * PCICSR: PCI control register.
556 * BIG_ENDIAN: 1: big endian, 0: little endian.
557 * RX_TRESHOLD: Rx threshold in dw to start pci access
558 * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw.
559 * TX_TRESHOLD: Tx threshold in dw to start pci access
560 * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward.
561 * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw.
562 * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational.
563 * READ_MULTIPLE: Enable memory read multiple.
564 * WRITE_INVALID: Enable memory write & invalid.
565 */
566 #define PCICSR 0x008c
567 #define PCICSR_BIG_ENDIAN FIELD32(0x00000001)
568 #define PCICSR_RX_TRESHOLD FIELD32(0x00000006)
569 #define PCICSR_TX_TRESHOLD FIELD32(0x00000018)
570 #define PCICSR_BURST_LENTH FIELD32(0x00000060)
571 #define PCICSR_ENABLE_CLK FIELD32(0x00000080)
572 #define PCICSR_READ_MULTIPLE FIELD32(0x00000100)
573 #define PCICSR_WRITE_INVALID FIELD32(0x00000200)
575 /*
576 * CNT0: FCS error count.
577 * FCS_ERROR: FCS error count, cleared when read.
578 */
579 #define CNT0 0x00a0
580 #define CNT0_FCS_ERROR FIELD32(0x0000ffff)
582 /*
583 * Statistic Register.
584 * CNT1: PLCP error count.
585 * CNT2: Long error count.
586 */
587 #define TIMECSR2 0x00a8
588 #define CNT1 0x00ac
589 #define CNT2 0x00b0
590 #define TIMECSR3 0x00b4
592 /*
593 * CNT3: CCA false alarm count.
594 */
595 #define CNT3 0x00b8
596 #define CNT3_FALSE_CCA FIELD32(0x0000ffff)
598 /*
599 * Statistic Register.
600 * CNT4: Rx FIFO overflow count.
601 * CNT5: Tx FIFO underrun count.
602 */
603 #define CNT4 0x00bc
604 #define CNT5 0x00c0
606 /*
607 * Baseband Control Register.
608 */
610 /*
611 * PWRCSR0: Power mode configuration register.
612 */
613 #define PWRCSR0 0x00c4
615 /*
616 * Power state transition time registers.
617 */
618 #define PSCSR0 0x00c8
619 #define PSCSR1 0x00cc
620 #define PSCSR2 0x00d0
621 #define PSCSR3 0x00d4
623 /*
624 * PWRCSR1: Manual power control / status register.
625 * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake.
626 * SET_STATE: Set state. Write 1 to trigger, self cleared.
627 * BBP_DESIRE_STATE: BBP desired state.
628 * RF_DESIRE_STATE: RF desired state.
629 * BBP_CURR_STATE: BBP current state.
630 * RF_CURR_STATE: RF current state.
631 * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared.
632 */
633 #define PWRCSR1 0x00d8
634 #define PWRCSR1_SET_STATE FIELD32(0x00000001)
635 #define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006)
636 #define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018)
637 #define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060)
638 #define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180)
639 #define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200)
641 /*
642 * TIMECSR: Timer control register.
643 * US_COUNT: 1 us timer count in units of clock cycles.
644 * US_64_COUNT: 64 us timer count in units of 1 us timer.
645 * BEACON_EXPECT: Beacon expect window.
646 */
647 #define TIMECSR 0x00dc
648 #define TIMECSR_US_COUNT FIELD32(0x000000ff)
649 #define TIMECSR_US_64_COUNT FIELD32(0x0000ff00)
650 #define TIMECSR_BEACON_EXPECT FIELD32(0x00070000)
652 /*
653 * MACCSR0: MAC configuration register 0.
654 */
655 #define MACCSR0 0x00e0
657 /*
658 * MACCSR1: MAC configuration register 1.
659 * KICK_RX: Kick one-shot rx in one-shot rx mode.
660 * ONESHOT_RXMODE: Enable one-shot rx mode for debugging.
661 * BBPRX_RESET_MODE: Ralink bbp rx reset mode.
662 * AUTO_TXBBP: Auto tx logic access bbp control register.
663 * AUTO_RXBBP: Auto rx logic access bbp control register.
664 * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd.
665 * INTERSIL_IF: Intersil if calibration pin.
666 */
667 #define MACCSR1 0x00e4
668 #define MACCSR1_KICK_RX FIELD32(0x00000001)
669 #define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002)
670 #define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004)
671 #define MACCSR1_AUTO_TXBBP FIELD32(0x00000008)
672 #define MACCSR1_AUTO_RXBBP FIELD32(0x00000010)
673 #define MACCSR1_LOOPBACK FIELD32(0x00000060)
674 #define MACCSR1_INTERSIL_IF FIELD32(0x00000080)
676 /*
677 * RALINKCSR: Ralink Rx auto-reset BBCR.
678 * AR_BBP_DATA#: Auto reset BBP register # data.
679 * AR_BBP_ID#: Auto reset BBP register # id.
680 */
681 #define RALINKCSR 0x00e8
682 #define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff)
683 #define RALINKCSR_AR_BBP_ID0 FIELD32(0x00007f00)
684 #define RALINKCSR_AR_BBP_VALID0 FIELD32(0x00008000)
685 #define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000)
686 #define RALINKCSR_AR_BBP_ID1 FIELD32(0x7f000000)
687 #define RALINKCSR_AR_BBP_VALID1 FIELD32(0x80000000)
689 /*
690 * BCNCSR: Beacon interval control register.
691 * CHANGE: Write one to change beacon interval.
692 * DELTATIME: The delta time value.
693 * NUM_BEACON: Number of beacon according to mode.
694 * MODE: Please refer to asic specs.
695 * PLUS: Plus or minus delta time value.
696 */
697 #define BCNCSR 0x00ec
698 #define BCNCSR_CHANGE FIELD32(0x00000001)
699 #define BCNCSR_DELTATIME FIELD32(0x0000001e)
700 #define BCNCSR_NUM_BEACON FIELD32(0x00001fe0)
701 #define BCNCSR_MODE FIELD32(0x00006000)
702 #define BCNCSR_PLUS FIELD32(0x00008000)
704 /*
705 * BBP / RF / IF Control Register.
706 */
708 /*
709 * BBPCSR: BBP serial control register.
710 * VALUE: Register value to program into BBP.
711 * REGNUM: Selected BBP register.
712 * BUSY: 1: asic is busy execute BBP programming.
713 * WRITE_CONTROL: 1: write BBP, 0: read BBP.
714 */
715 #define BBPCSR 0x00f0
716 #define BBPCSR_VALUE FIELD32(0x000000ff)
717 #define BBPCSR_REGNUM FIELD32(0x00007f00)
718 #define BBPCSR_BUSY FIELD32(0x00008000)
719 #define BBPCSR_WRITE_CONTROL FIELD32(0x00010000)
721 /*
722 * RFCSR: RF serial control register.
723 * VALUE: Register value + id to program into rf/if.
724 * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22).
725 * IF_SELECT: Chip to program: 0: rf, 1: if.
726 * PLL_LD: Rf pll_ld status.
727 * BUSY: 1: asic is busy execute rf programming.
728 */
729 #define RFCSR 0x00f4
730 #define RFCSR_VALUE FIELD32(0x00ffffff)
731 #define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000)
732 #define RFCSR_IF_SELECT FIELD32(0x20000000)
733 #define RFCSR_PLL_LD FIELD32(0x40000000)
734 #define RFCSR_BUSY FIELD32(0x80000000)
736 /*
737 * LEDCSR: LED control register.
738 * ON_PERIOD: On period, default 70ms.
739 * OFF_PERIOD: Off period, default 30ms.
740 * LINK: 0: linkoff, 1: linkup.
741 * ACTIVITY: 0: idle, 1: active.
742 * LINK_POLARITY: 0: active low, 1: active high.
743 * ACTIVITY_POLARITY: 0: active low, 1: active high.
744 * LED_DEFAULT: LED state for "enable" 0: ON, 1: OFF.
745 */
746 #define LEDCSR 0x00f8
747 #define LEDCSR_ON_PERIOD FIELD32(0x000000ff)
748 #define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00)
749 #define LEDCSR_LINK FIELD32(0x00010000)
750 #define LEDCSR_ACTIVITY FIELD32(0x00020000)
751 #define LEDCSR_LINK_POLARITY FIELD32(0x00040000)
752 #define LEDCSR_ACTIVITY_POLARITY FIELD32(0x00080000)
753 #define LEDCSR_LED_DEFAULT FIELD32(0x00100000)
755 /*
756 * SECCSR3: AES control register.
757 */
758 #define SECCSR3 0x00fc
760 /*
761 * ASIC pointer information.
762 * RXPTR: Current RX ring address.
763 * TXPTR: Current Tx ring address.
764 * PRIPTR: Current Priority ring address.
765 * ATIMPTR: Current ATIM ring address.
766 */
767 #define RXPTR 0x0100
768 #define TXPTR 0x0104
769 #define PRIPTR 0x0108
770 #define ATIMPTR 0x010c
772 /*
773 * TXACKCSR0: TX ACK timeout.
774 */
775 #define TXACKCSR0 0x0110
777 /*
778 * ACK timeout count registers.
779 * ACKCNT0: TX ACK timeout count.
780 * ACKCNT1: RX ACK timeout count.
781 */
782 #define ACKCNT0 0x0114
783 #define ACKCNT1 0x0118
785 /*
786 * GPIO and others.
787 */
789 /*
790 * GPIOCSR: GPIO control register.
791 */
792 #define GPIOCSR 0x0120
793 #define GPIOCSR_BIT0 FIELD32(0x00000001)
794 #define GPIOCSR_BIT1 FIELD32(0x00000002)
795 #define GPIOCSR_BIT2 FIELD32(0x00000004)
796 #define GPIOCSR_BIT3 FIELD32(0x00000008)
797 #define GPIOCSR_BIT4 FIELD32(0x00000010)
798 #define GPIOCSR_BIT5 FIELD32(0x00000020)
799 #define GPIOCSR_BIT6 FIELD32(0x00000040)
800 #define GPIOCSR_BIT7 FIELD32(0x00000080)
801 #define GPIOCSR_DIR0 FIELD32(0x00000100)
802 #define GPIOCSR_DIR1 FIELD32(0x00000200)
803 #define GPIOCSR_DIR2 FIELD32(0x00000400)
804 #define GPIOCSR_DIR3 FIELD32(0x00000800)
805 #define GPIOCSR_DIR4 FIELD32(0x00001000)
806 #define GPIOCSR_DIR5 FIELD32(0x00002000)
807 #define GPIOCSR_DIR6 FIELD32(0x00004000)
808 #define GPIOCSR_DIR7 FIELD32(0x00008000)
810 /*
811 * FIFO pointer registers.
812 * FIFOCSR0: TX FIFO pointer.
813 * FIFOCSR1: RX FIFO pointer.
814 */
815 #define FIFOCSR0 0x0128
816 #define FIFOCSR1 0x012c
818 /*
819 * BCNCSR1: Tx BEACON offset time control register.
820 * PRELOAD: Beacon timer offset in units of usec.
821 * BEACON_CWMIN: 2^CwMin.
822 */
823 #define BCNCSR1 0x0130
824 #define BCNCSR1_PRELOAD FIELD32(0x0000ffff)
825 #define BCNCSR1_BEACON_CWMIN FIELD32(0x000f0000)
827 /*
828 * MACCSR2: TX_PE to RX_PE turn-around time control register
829 * DELAY: RX_PE low width, in units of pci clock cycle.
830 */
831 #define MACCSR2 0x0134
832 #define MACCSR2_DELAY FIELD32(0x000000ff)
834 /*
835 * TESTCSR: TEST mode selection register.
836 */
837 #define TESTCSR 0x0138
839 /*
840 * ARCSR2: 1 Mbps ACK/CTS PLCP.
841 */
842 #define ARCSR2 0x013c
843 #define ARCSR2_SIGNAL FIELD32(0x000000ff)
844 #define ARCSR2_SERVICE FIELD32(0x0000ff00)
845 #define ARCSR2_LENGTH FIELD32(0xffff0000)
847 /*
848 * ARCSR3: 2 Mbps ACK/CTS PLCP.
849 */
850 #define ARCSR3 0x0140
851 #define ARCSR3_SIGNAL FIELD32(0x000000ff)
852 #define ARCSR3_SERVICE FIELD32(0x0000ff00)
853 #define ARCSR3_LENGTH FIELD32(0xffff0000)
855 /*
856 * ARCSR4: 5.5 Mbps ACK/CTS PLCP.
857 */
858 #define ARCSR4 0x0144
859 #define ARCSR4_SIGNAL FIELD32(0x000000ff)
860 #define ARCSR4_SERVICE FIELD32(0x0000ff00)
861 #define ARCSR4_LENGTH FIELD32(0xffff0000)
863 /*
864 * ARCSR5: 11 Mbps ACK/CTS PLCP.
865 */
866 #define ARCSR5 0x0148
867 #define ARCSR5_SIGNAL FIELD32(0x000000ff)
868 #define ARCSR5_SERVICE FIELD32(0x0000ff00)
869 #define ARCSR5_LENGTH FIELD32(0xffff0000)
871 /*
872 * ARTCSR0: CCK ACK/CTS payload consumed time for 1/2/5.5/11 mbps.
873 */
874 #define ARTCSR0 0x014c
875 #define ARTCSR0_ACK_CTS_11MBS FIELD32(0x000000ff)
876 #define ARTCSR0_ACK_CTS_5_5MBS FIELD32(0x0000ff00)
877 #define ARTCSR0_ACK_CTS_2MBS FIELD32(0x00ff0000)
878 #define ARTCSR0_ACK_CTS_1MBS FIELD32(0xff000000)
881 /*
882 * ARTCSR1: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
883 */
884 #define ARTCSR1 0x0150
885 #define ARTCSR1_ACK_CTS_6MBS FIELD32(0x000000ff)
886 #define ARTCSR1_ACK_CTS_9MBS FIELD32(0x0000ff00)
887 #define ARTCSR1_ACK_CTS_12MBS FIELD32(0x00ff0000)
888 #define ARTCSR1_ACK_CTS_18MBS FIELD32(0xff000000)
890 /*
891 * ARTCSR2: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
892 */
893 #define ARTCSR2 0x0154
894 #define ARTCSR2_ACK_CTS_24MBS FIELD32(0x000000ff)
895 #define ARTCSR2_ACK_CTS_36MBS FIELD32(0x0000ff00)
896 #define ARTCSR2_ACK_CTS_48MBS FIELD32(0x00ff0000)
897 #define ARTCSR2_ACK_CTS_54MBS FIELD32(0xff000000)
899 /*
900 * SECCSR1: WEP control register.
901 * KICK_ENCRYPT: Kick encryption engine, self-clear.
902 * ONE_SHOT: 0: ring mode, 1: One shot only mode.
903 * DESC_ADDRESS: Descriptor physical address of frame.
904 */
905 #define SECCSR1 0x0158
906 #define SECCSR1_KICK_ENCRYPT FIELD32(0x00000001)
907 #define SECCSR1_ONE_SHOT FIELD32(0x00000002)
908 #define SECCSR1_DESC_ADDRESS FIELD32(0xfffffffc)
910 /*
911 * BBPCSR1: BBP TX configuration.
912 */
913 #define BBPCSR1 0x015c
914 #define BBPCSR1_CCK FIELD32(0x00000003)
915 #define BBPCSR1_CCK_FLIP FIELD32(0x00000004)
916 #define BBPCSR1_OFDM FIELD32(0x00030000)
917 #define BBPCSR1_OFDM_FLIP FIELD32(0x00040000)
919 /*
920 * Dual band configuration registers.
921 * DBANDCSR0: Dual band configuration register 0.
922 * DBANDCSR1: Dual band configuration register 1.
923 */
924 #define DBANDCSR0 0x0160
925 #define DBANDCSR1 0x0164
927 /*
928 * BBPPCSR: BBP Pin control register.
929 */
930 #define BBPPCSR 0x0168
932 /*
933 * MAC special debug mode selection registers.
934 * DBGSEL0: MAC special debug mode selection register 0.
935 * DBGSEL1: MAC special debug mode selection register 1.
936 */
937 #define DBGSEL0 0x016c
938 #define DBGSEL1 0x0170
940 /*
941 * BISTCSR: BBP BIST register.
942 */
943 #define BISTCSR 0x0174
945 /*
946 * Multicast filter registers.
947 * MCAST0: Multicast filter register 0.
948 * MCAST1: Multicast filter register 1.
949 */
950 #define MCAST0 0x0178
951 #define MCAST1 0x017c
953 /*
954 * UART registers.
955 * UARTCSR0: UART1 TX register.
956 * UARTCSR1: UART1 RX register.
957 * UARTCSR3: UART1 frame control register.
958 * UARTCSR4: UART1 buffer control register.
959 * UART2CSR0: UART2 TX register.
960 * UART2CSR1: UART2 RX register.
961 * UART2CSR3: UART2 frame control register.
962 * UART2CSR4: UART2 buffer control register.
963 */
964 #define UARTCSR0 0x0180
965 #define UARTCSR1 0x0184
966 #define UARTCSR3 0x0188
967 #define UARTCSR4 0x018c
968 #define UART2CSR0 0x0190
969 #define UART2CSR1 0x0194
970 #define UART2CSR3 0x0198
971 #define UART2CSR4 0x019c
973 /*
974 * BBP registers.
975 * The wordsize of the BBP is 8 bits.
976 */
978 /*
979 * R2: TX antenna control
980 */
981 #define BBP_R2_TX_ANTENNA FIELD8(0x03)
982 #define BBP_R2_TX_IQ_FLIP FIELD8(0x04)
984 /*
985 * R14: RX antenna control
986 */
987 #define BBP_R14_RX_ANTENNA FIELD8(0x03)
988 #define BBP_R14_RX_IQ_FLIP FIELD8(0x04)
990 /*
991 * BBP_R70
992 */
993 #define BBP_R70_JAPAN_FILTER FIELD8(0x08)
995 /*
996 * RF registers
997 */
999 /*
1000 * RF 1
1001 */
1002 #define RF1_TUNER FIELD32(0x00020000)
1004 /*
1005 * RF 3
1006 */
1007 #define RF3_TUNER FIELD32(0x00000100)
1008 #define RF3_TXPOWER FIELD32(0x00003e00)
1010 /*
1011 * EEPROM content.
1012 * The wordsize of the EEPROM is 16 bits.
1013 */
1015 /*
1016 * HW MAC address.
1017 */
1018 #define EEPROM_MAC_ADDR_0 0x0002
1019 #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
1020 #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
1021 #define EEPROM_MAC_ADDR1 0x0003
1022 #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
1023 #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
1024 #define EEPROM_MAC_ADDR_2 0x0004
1025 #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
1026 #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
1028 /*
1029 * EEPROM antenna.
1030 * ANTENNA_NUM: Number of antenna's.
1031 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1032 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1033 * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd.
1034 * DYN_TXAGC: Dynamic TX AGC control.
1035 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
1036 * RF_TYPE: Rf_type of this adapter.
1037 */
1038 #define EEPROM_ANTENNA 0x10
1039 #define EEPROM_ANTENNA_NUM FIELD16(0x0003)
1040 #define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
1041 #define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
1042 #define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0)
1043 #define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
1044 #define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
1045 #define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
1047 /*
1048 * EEPROM NIC config.
1049 * CARDBUS_ACCEL: 0: enable, 1: disable.
1050 * DYN_BBP_TUNE: 0: enable, 1: disable.
1051 * CCK_TX_POWER: CCK TX power compensation.
1052 */
1053 #define EEPROM_NIC 0x11
1054 #define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001)
1055 #define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002)
1056 #define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c)
1058 /*
1059 * EEPROM geography.
1060 * GEO: Default geography setting for device.
1061 */
1062 #define EEPROM_GEOGRAPHY 0x12
1063 #define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00)
1065 /*
1066 * EEPROM BBP.
1067 */
1068 #define EEPROM_BBP_START 0x13
1069 #define EEPROM_BBP_SIZE 16
1070 #define EEPROM_BBP_VALUE FIELD16(0x00ff)
1071 #define EEPROM_BBP_REG_ID FIELD16(0xff00)
1073 /*
1074 * EEPROM TXPOWER
1075 */
1076 #define EEPROM_TXPOWER_START 0x23
1077 #define EEPROM_TXPOWER_SIZE 7
1078 #define EEPROM_TXPOWER_1 FIELD16(0x00ff)
1079 #define EEPROM_TXPOWER_2 FIELD16(0xff00)
1081 /*
1082 * RSSI <-> dBm offset calibration
1083 */
1084 #define EEPROM_CALIBRATE_OFFSET 0x3e
1085 #define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff)
1087 /*
1088 * DMA descriptor defines.
1089 */
1090 #define TXD_DESC_SIZE ( 11 * sizeof(__le32) )
1091 #define RXD_DESC_SIZE ( 11 * sizeof(__le32) )
1093 /*
1094 * TX descriptor format for TX, PRIO, ATIM and Beacon Ring.
1095 */
1097 /*
1098 * Word0
1099 */
1100 #define TXD_W0_OWNER_NIC FIELD32(0x00000001)
1101 #define TXD_W0_VALID FIELD32(0x00000002)
1102 #define TXD_W0_RESULT FIELD32(0x0000001c)
1103 #define TXD_W0_RETRY_COUNT FIELD32(0x000000e0)
1104 #define TXD_W0_MORE_FRAG FIELD32(0x00000100)
1105 #define TXD_W0_ACK FIELD32(0x00000200)
1106 #define TXD_W0_TIMESTAMP FIELD32(0x00000400)
1107 #define TXD_W0_OFDM FIELD32(0x00000800)
1108 #define TXD_W0_CIPHER_OWNER FIELD32(0x00001000)
1109 #define TXD_W0_IFS FIELD32(0x00006000)
1110 #define TXD_W0_RETRY_MODE FIELD32(0x00008000)
1111 #define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1112 #define TXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1114 /*
1115 * Word1
1116 */
1117 #define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
1119 /*
1120 * Word2
1121 */
1122 #define TXD_W2_IV_OFFSET FIELD32(0x0000003f)
1123 #define TXD_W2_AIFS FIELD32(0x000000c0)
1124 #define TXD_W2_CWMIN FIELD32(0x00000f00)
1125 #define TXD_W2_CWMAX FIELD32(0x0000f000)
1127 /*
1128 * Word3: PLCP information
1129 */
1130 #define TXD_W3_PLCP_SIGNAL FIELD32(0x000000ff)
1131 #define TXD_W3_PLCP_SERVICE FIELD32(0x0000ff00)
1132 #define TXD_W3_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
1133 #define TXD_W3_PLCP_LENGTH_HIGH FIELD32(0xff000000)
1135 /*
1136 * Word4
1137 */
1138 #define TXD_W4_IV FIELD32(0xffffffff)
1140 /*
1141 * Word5
1142 */
1143 #define TXD_W5_EIV FIELD32(0xffffffff)
1145 /*
1146 * Word6-9: Key
1147 */
1148 #define TXD_W6_KEY FIELD32(0xffffffff)
1149 #define TXD_W7_KEY FIELD32(0xffffffff)
1150 #define TXD_W8_KEY FIELD32(0xffffffff)
1151 #define TXD_W9_KEY FIELD32(0xffffffff)
1153 /*
1154 * Word10
1155 */
1156 #define TXD_W10_RTS FIELD32(0x00000001)
1157 #define TXD_W10_TX_RATE FIELD32(0x000000fe)
1159 /*
1160 * RX descriptor format for RX Ring.
1161 */
1163 /*
1164 * Word0
1165 */
1166 #define RXD_W0_OWNER_NIC FIELD32(0x00000001)
1167 #define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002)
1168 #define RXD_W0_MULTICAST FIELD32(0x00000004)
1169 #define RXD_W0_BROADCAST FIELD32(0x00000008)
1170 #define RXD_W0_MY_BSS FIELD32(0x00000010)
1171 #define RXD_W0_CRC_ERROR FIELD32(0x00000020)
1172 #define RXD_W0_OFDM FIELD32(0x00000040)
1173 #define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080)
1174 #define RXD_W0_CIPHER_OWNER FIELD32(0x00000100)
1175 #define RXD_W0_ICV_ERROR FIELD32(0x00000200)
1176 #define RXD_W0_IV_OFFSET FIELD32(0x0000fc00)
1177 #define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1178 #define RXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1180 /*
1181 * Word1
1182 */
1183 #define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
1185 /*
1186 * Word2
1187 */
1188 #define RXD_W2_SIGNAL FIELD32(0x000000ff)
1189 #define RXD_W2_RSSI FIELD32(0x0000ff00)
1190 #define RXD_W2_TA FIELD32(0xffff0000)
1192 /*
1193 * Word3
1194 */
1195 #define RXD_W3_TA FIELD32(0xffffffff)
1197 /*
1198 * Word4
1199 */
1200 #define RXD_W4_IV FIELD32(0xffffffff)
1202 /*
1203 * Word5
1204 */
1205 #define RXD_W5_EIV FIELD32(0xffffffff)
1207 /*
1208 * Word6-9: Key
1209 */
1210 #define RXD_W6_KEY FIELD32(0xffffffff)
1211 #define RXD_W7_KEY FIELD32(0xffffffff)
1212 #define RXD_W8_KEY FIELD32(0xffffffff)
1213 #define RXD_W9_KEY FIELD32(0xffffffff)
1215 /*
1216 * Word10
1217 */
1218 #define RXD_W10_DROP FIELD32(0x00000001)
1220 /*
1221 * Macro's for converting txpower from EEPROM to mac80211 value
1222 * and from mac80211 value to register value.
1223 */
1224 #define MIN_TXPOWER 0
1225 #define MAX_TXPOWER 31
1226 #define DEFAULT_TXPOWER 24
1228 #define TXPOWER_FROM_DEV(__txpower) \
1229 (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
1231 #define TXPOWER_TO_DEV(__txpower) \
1232 clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)