[ARM] S3C: Fix scaler1 clock rate information
[linux-2.6/openmoko-kernel.git] / kernel / sched_stats.h
blobee71bec1da66a9dcb64d93a0e9934c15a155905b
2 #ifdef CONFIG_SCHEDSTATS
3 /*
4 * bump this up when changing the output format or the meaning of an existing
5 * format, so that tools can adapt (or abort)
6 */
7 #define SCHEDSTAT_VERSION 14
9 static int show_schedstat(struct seq_file *seq, void *v)
11 int cpu;
12 int mask_len = DIV_ROUND_UP(NR_CPUS, 32) * 9;
13 char *mask_str = kmalloc(mask_len, GFP_KERNEL);
15 if (mask_str == NULL)
16 return -ENOMEM;
18 seq_printf(seq, "version %d\n", SCHEDSTAT_VERSION);
19 seq_printf(seq, "timestamp %lu\n", jiffies);
20 for_each_online_cpu(cpu) {
21 struct rq *rq = cpu_rq(cpu);
22 #ifdef CONFIG_SMP
23 struct sched_domain *sd;
24 int dcount = 0;
25 #endif
27 /* runqueue-specific stats */
28 seq_printf(seq,
29 "cpu%d %u %u %u %u %u %u %u %u %u %llu %llu %lu",
30 cpu, rq->yld_both_empty,
31 rq->yld_act_empty, rq->yld_exp_empty, rq->yld_count,
32 rq->sched_switch, rq->sched_count, rq->sched_goidle,
33 rq->ttwu_count, rq->ttwu_local,
34 rq->rq_sched_info.cpu_time,
35 rq->rq_sched_info.run_delay, rq->rq_sched_info.pcount);
37 seq_printf(seq, "\n");
39 #ifdef CONFIG_SMP
40 /* domain-specific stats */
41 preempt_disable();
42 for_each_domain(cpu, sd) {
43 enum cpu_idle_type itype;
45 cpumask_scnprintf(mask_str, mask_len, sd->span);
46 seq_printf(seq, "domain%d %s", dcount++, mask_str);
47 for (itype = CPU_IDLE; itype < CPU_MAX_IDLE_TYPES;
48 itype++) {
49 seq_printf(seq, " %u %u %u %u %u %u %u %u",
50 sd->lb_count[itype],
51 sd->lb_balanced[itype],
52 sd->lb_failed[itype],
53 sd->lb_imbalance[itype],
54 sd->lb_gained[itype],
55 sd->lb_hot_gained[itype],
56 sd->lb_nobusyq[itype],
57 sd->lb_nobusyg[itype]);
59 seq_printf(seq,
60 " %u %u %u %u %u %u %u %u %u %u %u %u\n",
61 sd->alb_count, sd->alb_failed, sd->alb_pushed,
62 sd->sbe_count, sd->sbe_balanced, sd->sbe_pushed,
63 sd->sbf_count, sd->sbf_balanced, sd->sbf_pushed,
64 sd->ttwu_wake_remote, sd->ttwu_move_affine,
65 sd->ttwu_move_balance);
67 preempt_enable();
68 #endif
70 kfree(mask_str);
71 return 0;
74 static int schedstat_open(struct inode *inode, struct file *file)
76 unsigned int size = PAGE_SIZE * (1 + num_online_cpus() / 32);
77 char *buf = kmalloc(size, GFP_KERNEL);
78 struct seq_file *m;
79 int res;
81 if (!buf)
82 return -ENOMEM;
83 res = single_open(file, show_schedstat, NULL);
84 if (!res) {
85 m = file->private_data;
86 m->buf = buf;
87 m->size = size;
88 } else
89 kfree(buf);
90 return res;
93 static const struct file_operations proc_schedstat_operations = {
94 .open = schedstat_open,
95 .read = seq_read,
96 .llseek = seq_lseek,
97 .release = single_release,
100 static int __init proc_schedstat_init(void)
102 proc_create("schedstat", 0, NULL, &proc_schedstat_operations);
103 return 0;
105 module_init(proc_schedstat_init);
108 * Expects runqueue lock to be held for atomicity of update
110 static inline void
111 rq_sched_info_arrive(struct rq *rq, unsigned long long delta)
113 if (rq) {
114 rq->rq_sched_info.run_delay += delta;
115 rq->rq_sched_info.pcount++;
120 * Expects runqueue lock to be held for atomicity of update
122 static inline void
123 rq_sched_info_depart(struct rq *rq, unsigned long long delta)
125 if (rq)
126 rq->rq_sched_info.cpu_time += delta;
129 static inline void
130 rq_sched_info_dequeued(struct rq *rq, unsigned long long delta)
132 if (rq)
133 rq->rq_sched_info.run_delay += delta;
135 # define schedstat_inc(rq, field) do { (rq)->field++; } while (0)
136 # define schedstat_add(rq, field, amt) do { (rq)->field += (amt); } while (0)
137 # define schedstat_set(var, val) do { var = (val); } while (0)
138 #else /* !CONFIG_SCHEDSTATS */
139 static inline void
140 rq_sched_info_arrive(struct rq *rq, unsigned long long delta)
142 static inline void
143 rq_sched_info_dequeued(struct rq *rq, unsigned long long delta)
145 static inline void
146 rq_sched_info_depart(struct rq *rq, unsigned long long delta)
148 # define schedstat_inc(rq, field) do { } while (0)
149 # define schedstat_add(rq, field, amt) do { } while (0)
150 # define schedstat_set(var, val) do { } while (0)
151 #endif
153 #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
154 static inline void sched_info_reset_dequeued(struct task_struct *t)
156 t->sched_info.last_queued = 0;
160 * Called when a process is dequeued from the active array and given
161 * the cpu. We should note that with the exception of interactive
162 * tasks, the expired queue will become the active queue after the active
163 * queue is empty, without explicitly dequeuing and requeuing tasks in the
164 * expired queue. (Interactive tasks may be requeued directly to the
165 * active queue, thus delaying tasks in the expired queue from running;
166 * see scheduler_tick()).
168 * Though we are interested in knowing how long it was from the *first* time a
169 * task was queued to the time that it finally hit a cpu, we call this routine
170 * from dequeue_task() to account for possible rq->clock skew across cpus. The
171 * delta taken on each cpu would annul the skew.
173 static inline void sched_info_dequeued(struct task_struct *t)
175 unsigned long long now = task_rq(t)->clock, delta = 0;
177 if (unlikely(sched_info_on()))
178 if (t->sched_info.last_queued)
179 delta = now - t->sched_info.last_queued;
180 sched_info_reset_dequeued(t);
181 t->sched_info.run_delay += delta;
183 rq_sched_info_dequeued(task_rq(t), delta);
187 * Called when a task finally hits the cpu. We can now calculate how
188 * long it was waiting to run. We also note when it began so that we
189 * can keep stats on how long its timeslice is.
191 static void sched_info_arrive(struct task_struct *t)
193 unsigned long long now = task_rq(t)->clock, delta = 0;
195 if (t->sched_info.last_queued)
196 delta = now - t->sched_info.last_queued;
197 sched_info_reset_dequeued(t);
198 t->sched_info.run_delay += delta;
199 t->sched_info.last_arrival = now;
200 t->sched_info.pcount++;
202 rq_sched_info_arrive(task_rq(t), delta);
206 * Called when a process is queued into either the active or expired
207 * array. The time is noted and later used to determine how long we
208 * had to wait for us to reach the cpu. Since the expired queue will
209 * become the active queue after active queue is empty, without dequeuing
210 * and requeuing any tasks, we are interested in queuing to either. It
211 * is unusual but not impossible for tasks to be dequeued and immediately
212 * requeued in the same or another array: this can happen in sched_yield(),
213 * set_user_nice(), and even load_balance() as it moves tasks from runqueue
214 * to runqueue.
216 * This function is only called from enqueue_task(), but also only updates
217 * the timestamp if it is already not set. It's assumed that
218 * sched_info_dequeued() will clear that stamp when appropriate.
220 static inline void sched_info_queued(struct task_struct *t)
222 if (unlikely(sched_info_on()))
223 if (!t->sched_info.last_queued)
224 t->sched_info.last_queued = task_rq(t)->clock;
228 * Called when a process ceases being the active-running process, either
229 * voluntarily or involuntarily. Now we can calculate how long we ran.
230 * Also, if the process is still in the TASK_RUNNING state, call
231 * sched_info_queued() to mark that it has now again started waiting on
232 * the runqueue.
234 static inline void sched_info_depart(struct task_struct *t)
236 unsigned long long delta = task_rq(t)->clock -
237 t->sched_info.last_arrival;
239 t->sched_info.cpu_time += delta;
240 rq_sched_info_depart(task_rq(t), delta);
242 if (t->state == TASK_RUNNING)
243 sched_info_queued(t);
247 * Called when tasks are switched involuntarily due, typically, to expiring
248 * their time slice. (This may also be called when switching to or from
249 * the idle task.) We are only called when prev != next.
251 static inline void
252 __sched_info_switch(struct task_struct *prev, struct task_struct *next)
254 struct rq *rq = task_rq(prev);
257 * prev now departs the cpu. It's not interesting to record
258 * stats about how efficient we were at scheduling the idle
259 * process, however.
261 if (prev != rq->idle)
262 sched_info_depart(prev);
264 if (next != rq->idle)
265 sched_info_arrive(next);
267 static inline void
268 sched_info_switch(struct task_struct *prev, struct task_struct *next)
270 if (unlikely(sched_info_on()))
271 __sched_info_switch(prev, next);
273 #else
274 #define sched_info_queued(t) do { } while (0)
275 #define sched_info_reset_dequeued(t) do { } while (0)
276 #define sched_info_dequeued(t) do { } while (0)
277 #define sched_info_switch(t, next) do { } while (0)
278 #endif /* CONFIG_SCHEDSTATS || CONFIG_TASK_DELAY_ACCT */
281 * The following are functions that support scheduler-internal time accounting.
282 * These functions are generally called at the timer tick. None of this depends
283 * on CONFIG_SCHEDSTATS.
287 * account_group_user_time - Maintain utime for a thread group.
289 * @tsk: Pointer to task structure.
290 * @cputime: Time value by which to increment the utime field of the
291 * thread_group_cputime structure.
293 * If thread group time is being maintained, get the structure for the
294 * running CPU and update the utime field there.
296 static inline void account_group_user_time(struct task_struct *tsk,
297 cputime_t cputime)
299 struct signal_struct *sig;
301 sig = tsk->signal;
302 if (unlikely(!sig))
303 return;
304 if (sig->cputime.totals) {
305 struct task_cputime *times;
307 times = per_cpu_ptr(sig->cputime.totals, get_cpu());
308 times->utime = cputime_add(times->utime, cputime);
309 put_cpu_no_resched();
314 * account_group_system_time - Maintain stime for a thread group.
316 * @tsk: Pointer to task structure.
317 * @cputime: Time value by which to increment the stime field of the
318 * thread_group_cputime structure.
320 * If thread group time is being maintained, get the structure for the
321 * running CPU and update the stime field there.
323 static inline void account_group_system_time(struct task_struct *tsk,
324 cputime_t cputime)
326 struct signal_struct *sig;
328 sig = tsk->signal;
329 if (unlikely(!sig))
330 return;
331 if (sig->cputime.totals) {
332 struct task_cputime *times;
334 times = per_cpu_ptr(sig->cputime.totals, get_cpu());
335 times->stime = cputime_add(times->stime, cputime);
336 put_cpu_no_resched();
341 * account_group_exec_runtime - Maintain exec runtime for a thread group.
343 * @tsk: Pointer to task structure.
344 * @ns: Time value by which to increment the sum_exec_runtime field
345 * of the thread_group_cputime structure.
347 * If thread group time is being maintained, get the structure for the
348 * running CPU and update the sum_exec_runtime field there.
350 static inline void account_group_exec_runtime(struct task_struct *tsk,
351 unsigned long long ns)
353 struct signal_struct *sig;
355 sig = tsk->signal;
356 if (unlikely(!sig))
357 return;
358 if (sig->cputime.totals) {
359 struct task_cputime *times;
361 times = per_cpu_ptr(sig->cputime.totals, get_cpu());
362 times->sum_exec_runtime += ns;
363 put_cpu_no_resched();