arch/x86/kernel/cpu/amd.c

   1 #include <linux/init.h>
   2 #include <linux/bitops.h>
   3 #include <linux/mm.h>
   4
   5 #include <asm/io.h>
   6 #include <asm/processor.h>
   7 #include <asm/apic.h>
   8 #include <asm/cpu.h>
   9 #include <asm/pci-direct.h>
  10
  11 #ifdef CONFIG_X86_64
  12 # include <asm/numa_64.h>
  13 # include <asm/mmconfig.h>
  14 # include <asm/cacheflush.h>
  15 #endif
  16
  17 #include "cpu.h"
  18
  19 #ifdef CONFIG_X86_32
  20 /*
  21  *      B step AMD K6 before B 9730xxxx have hardware bugs that can cause
  22  *      misexecution of code under Linux. Owners of such processors should
  23  *      contact AMD for precise details and a CPU swap.
  24  *
  25  *      See     http://www.multimania.com/poulot/k6bug.html
  26  *              http://www.amd.com/K6/k6docs/revgd.html
  27  *
  28  *      The following test is erm.. interesting. AMD neglected to up
  29  *      the chip setting when fixing the bug but they also tweaked some
  30  *      performance at the same time..
  31  */
  32
  33 extern void vide(void);
  34 __asm__(".align 4\nvide: ret");
  35
  36 static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c)
  37 {
  38 /*
  39  * General Systems BIOSen alias the cpu frequency registers
  40  * of the Elan at 0x000df000. Unfortuantly, one of the Linux
  41  * drivers subsequently pokes it, and changes the CPU speed.
  42  * Workaround : Remove the unneeded alias.
  43  */
  44 #define CBAR            (0xfffc) /* Configuration Base Address  (32-bit) */
  45 #define CBAR_ENB        (0x80000000)
  46 #define CBAR_KEY        (0X000000CB)
  47         if (c->x86_model == 9 || c->x86_model == 10) {
  48                 if (inl (CBAR) & CBAR_ENB)
  49                         outl (0 | CBAR_KEY, CBAR);
  50         }
  51 }
  52
  53
  54 static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
  55 {
  56         u32 l, h;
  57         int mbytes = num_physpages >> (20-PAGE_SHIFT);
  58
  59         if (c->x86_model < 6) {
  60                 /* Based on AMD doc 20734R - June 2000 */
  61                 if (c->x86_model == 0) {
  62                         clear_cpu_cap(c, X86_FEATURE_APIC);
  63                         set_cpu_cap(c, X86_FEATURE_PGE);
  64                 }
  65                 return;
  66         }
  67
  68         if (c->x86_model == 6 && c->x86_mask == 1) {
  69                 const int K6_BUG_LOOP = 1000000;
  70                 int n;
  71                 void (*f_vide)(void);
  72                 unsigned long d, d2;
  73
  74                 printk(KERN_INFO "AMD K6 stepping B detected - ");
  75
  76                 /*
  77                  * It looks like AMD fixed the 2.6.2 bug and improved indirect
  78                  * calls at the same time.
  79                  */
  80
  81                 n = K6_BUG_LOOP;
  82                 f_vide = vide;
  83                 rdtscl(d);
  84                 while (n--)
  85                         f_vide();
  86                 rdtscl(d2);
  87                 d = d2-d;
  88
  89                 if (d > 20*K6_BUG_LOOP)
  90                         printk("system stability may be impaired when more than 32 MB are used.\n");
  91                 else
  92                         printk("probably OK (after B9730xxxx).\n");
  93                 printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
  94         }
  95
  96         /* K6 with old style WHCR */
  97         if (c->x86_model < 8 ||
  98            (c->x86_model == 8 && c->x86_mask < 8)) {
  99                 /* We can only write allocate on the low 508Mb */
 100                 if (mbytes > 508)
 101                         mbytes = 508;
 102
 103                 rdmsr(MSR_K6_WHCR, l, h);
 104                 if ((l&0x0000FFFF) == 0) {
 105                         unsigned long flags;
 106                         l = (1<<0)|((mbytes/4)<<1);
 107                         local_irq_save(flags);
 108                         wbinvd();
 109                         wrmsr(MSR_K6_WHCR, l, h);
 110                         local_irq_restore(flags);
 111                         printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
 112                                 mbytes);
 113                 }
 114                 return;
 115         }
 116
 117         if ((c->x86_model == 8 && c->x86_mask > 7) ||
 118              c->x86_model == 9 || c->x86_model == 13) {
 119                 /* The more serious chips .. */
 120
 121                 if (mbytes > 4092)
 122                         mbytes = 4092;
 123
 124                 rdmsr(MSR_K6_WHCR, l, h);
 125                 if ((l&0xFFFF0000) == 0) {
 126                         unsigned long flags;
 127                         l = ((mbytes>>2)<<22)|(1<<16);
 128                         local_irq_save(flags);
 129                         wbinvd();
 130                         wrmsr(MSR_K6_WHCR, l, h);
 131                         local_irq_restore(flags);
 132                         printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
 133                                 mbytes);
 134                 }
 135
 136                 return;
 137         }
 138
 139         if (c->x86_model == 10) {
 140                 /* AMD Geode LX is model 10 */
 141                 /* placeholder for any needed mods */
 142                 return;
 143         }
 144 }
 145
 146 static void __cpuinit amd_k7_smp_check(struct cpuinfo_x86 *c)
 147 {
 148 #ifdef CONFIG_SMP
 149         /* calling is from identify_secondary_cpu() ? */
 150         if (c->cpu_index == boot_cpu_id)
 151                 return;
 152
 153         /*
 154          * Certain Athlons might work (for various values of 'work') in SMP
 155          * but they are not certified as MP capable.
 156          */
 157         /* Athlon 660/661 is valid. */
 158         if ((c->x86_model == 6) && ((c->x86_mask == 0) ||
 159             (c->x86_mask == 1)))
 160                 goto valid_k7;
 161
 162         /* Duron 670 is valid */
 163         if ((c->x86_model == 7) && (c->x86_mask == 0))
 164                 goto valid_k7;
 165
 166         /*
 167          * Athlon 662, Duron 671, and Athlon >model 7 have capability
 168          * bit. It's worth noting that the A5 stepping (662) of some
 169          * Athlon XP's have the MP bit set.
 170          * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
 171          * more.
 172          */
 173         if (((c->x86_model == 6) && (c->x86_mask >= 2)) ||
 174             ((c->x86_model == 7) && (c->x86_mask >= 1)) ||
 175              (c->x86_model > 7))
 176                 if (cpu_has_mp)
 177                         goto valid_k7;
 178
 179         /* If we get here, not a certified SMP capable AMD system. */
 180
 181         /*
 182          * Don't taint if we are running SMP kernel on a single non-MP
 183          * approved Athlon
 184          */
 185         WARN_ONCE(1, "WARNING: This combination of AMD"
 186                 "processors is not suitable for SMP.\n");
 187         if (!test_taint(TAINT_UNSAFE_SMP))
 188                 add_taint(TAINT_UNSAFE_SMP);
 189
 190 valid_k7:
 191         ;
 192 #endif
 193 }
 194
 195 static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
 196 {
 197         u32 l, h;
 198
 199         /*
 200          * Bit 15 of Athlon specific MSR 15, needs to be 0
 201          * to enable SSE on Palomino/Morgan/Barton CPU's.
 202          * If the BIOS didn't enable it already, enable it here.
 203          */
 204         if (c->x86_model >= 6 && c->x86_model <= 10) {
 205                 if (!cpu_has(c, X86_FEATURE_XMM)) {
 206                         printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
 207                         rdmsr(MSR_K7_HWCR, l, h);
 208                         l &= ~0x00008000;
 209                         wrmsr(MSR_K7_HWCR, l, h);
 210                         set_cpu_cap(c, X86_FEATURE_XMM);
 211                 }
 212         }
 213
 214         /*
 215          * It's been determined by AMD that Athlons since model 8 stepping 1
 216          * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
 217          * As per AMD technical note 27212 0.2
 218          */
 219         if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
 220                 rdmsr(MSR_K7_CLK_CTL, l, h);
 221                 if ((l & 0xfff00000) != 0x20000000) {
 222                         printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
 223                                 ((l & 0x000fffff)|0x20000000));
 224                         wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
 225                 }
 226         }
 227
 228         set_cpu_cap(c, X86_FEATURE_K7);
 229
 230         amd_k7_smp_check(c);
 231 }
 232 #endif
 233
 234 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 235 static int __cpuinit nearby_node(int apicid)
 236 {
 237         int i, node;
 238
 239         for (i = apicid - 1; i >= 0; i--) {
 240                 node = apicid_to_node[i];
 241                 if (node != NUMA_NO_NODE && node_online(node))
 242                         return node;
 243         }
 244         for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
 245                 node = apicid_to_node[i];
 246                 if (node != NUMA_NO_NODE && node_online(node))
 247                         return node;
 248         }
 249         return first_node(node_online_map); /* Shouldn't happen */
 250 }
 251 #endif
 252
 253 /*
 254  * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
 255  * Assumes number of cores is a power of two.
 256  */
 257 static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
 258 {
 259 #ifdef CONFIG_X86_HT
 260         unsigned bits;
 261         int cpu = smp_processor_id();
 262
 263         bits = c->x86_coreid_bits;
 264         /* Low order bits define the core id (index of core in socket) */
 265         c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
 266         /* Convert the initial APIC ID into the socket ID */
 267         c->phys_proc_id = c->initial_apicid >> bits;
 268         /* use socket ID also for last level cache */
 269         per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
 270 #endif
 271 }
 272
 273 static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 274 {
 275 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 276         int cpu = smp_processor_id();
 277         int node;
 278         unsigned apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
 279
 280         node = c->phys_proc_id;
 281         if (apicid_to_node[apicid] != NUMA_NO_NODE)
 282                 node = apicid_to_node[apicid];
 283         if (!node_online(node)) {
 284                 /* Two possibilities here:
 285                    - The CPU is missing memory and no node was created.
 286                    In that case try picking one from a nearby CPU
 287                    - The APIC IDs differ from the HyperTransport node IDs
 288                    which the K8 northbridge parsing fills in.
 289                    Assume they are all increased by a constant offset,
 290                    but in the same order as the HT nodeids.
 291                    If that doesn't result in a usable node fall back to the
 292                    path for the previous case.  */
 293
 294                 int ht_nodeid = c->initial_apicid;
 295
 296                 if (ht_nodeid >= 0 &&
 297                     apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
 298                         node = apicid_to_node[ht_nodeid];
 299                 /* Pick a nearby node */
 300                 if (!node_online(node))
 301                         node = nearby_node(apicid);
 302         }
 303         numa_set_node(cpu, node);
 304
 305         printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
 306 #endif
 307 }
 308
 309 static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
 310 {
 311 #ifdef CONFIG_X86_HT
 312         unsigned bits, ecx;
 313
 314         /* Multi core CPU? */
 315         if (c->extended_cpuid_level < 0x80000008)
 316                 return;
 317
 318         ecx = cpuid_ecx(0x80000008);
 319
 320         c->x86_max_cores = (ecx & 0xff) + 1;
 321
 322         /* CPU telling us the core id bits shift? */
 323         bits = (ecx >> 12) & 0xF;
 324
 325         /* Otherwise recompute */
 326         if (bits == 0) {
 327                 while ((1 << bits) < c->x86_max_cores)
 328                         bits++;
 329         }
 330
 331         c->x86_coreid_bits = bits;
 332 #endif
 333 }
 334
 335 static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 336 {
 337         early_init_amd_mc(c);
 338
 339         /*
 340          * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
 341          * with P/T states and does not stop in deep C-states
 342          */
 343         if (c->x86_power & (1 << 8)) {
 344                 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 345                 set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
 346         }
 347
 348 #ifdef CONFIG_X86_64
 349         set_cpu_cap(c, X86_FEATURE_SYSCALL32);
 350 #else
 351         /*  Set MTRR capability flag if appropriate */
 352         if (c->x86 == 5)
 353                 if (c->x86_model == 13 || c->x86_model == 9 ||
 354                     (c->x86_model == 8 && c->x86_mask >= 8))
 355                         set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 356 #endif
 357 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
 358         /* check CPU config space for extended APIC ID */
 359         if (cpu_has_apic && c->x86 >= 0xf) {
 360                 unsigned int val;
 361                 val = read_pci_config(0, 24, 0, 0x68);
 362                 if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18)))
 363                         set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
 364         }
 365 #endif
 366 }
 367
 368 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 369 {
 370 #ifdef CONFIG_SMP
 371         unsigned long long value;
 372
 373         /*
 374          * Disable TLB flush filter by setting HWCR.FFDIS on K8
 375          * bit 6 of msr C001_0015
 376          *
 377          * Errata 63 for SH-B3 steppings
 378          * Errata 122 for all steppings (F+ have it disabled by default)
 379          */
 380         if (c->x86 == 0xf) {
 381                 rdmsrl(MSR_K7_HWCR, value);
 382                 value |= 1 << 6;
 383                 wrmsrl(MSR_K7_HWCR, value);
 384         }
 385 #endif
 386
 387         early_init_amd(c);
 388
 389         /*
 390          * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
 391          * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
 392          */
 393         clear_cpu_cap(c, 0*32+31);
 394
 395 #ifdef CONFIG_X86_64
 396         /* On C+ stepping K8 rep microcode works well for copy/memset */
 397         if (c->x86 == 0xf) {
 398                 u32 level;
 399
 400                 level = cpuid_eax(1);
 401                 if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
 402                         set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 403
 404                 /*
 405                  * Some BIOSes incorrectly force this feature, but only K8
 406                  * revision D (model = 0x14) and later actually support it.
 407                  */
 408                 if (c->x86_model < 0x14)
 409                         clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
 410         }
 411         if (c->x86 == 0x10 || c->x86 == 0x11)
 412                 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 413 #else
 414
 415         /*
 416          *      FIXME: We should handle the K5 here. Set up the write
 417          *      range and also turn on MSR 83 bits 4 and 31 (write alloc,
 418          *      no bus pipeline)
 419          */
 420
 421         switch (c->x86) {
 422         case 4:
 423                 init_amd_k5(c);
 424                 break;
 425         case 5:
 426                 init_amd_k6(c);
 427                 break;
 428         case 6: /* An Athlon/Duron */
 429                 init_amd_k7(c);
 430                 break;
 431         }
 432
 433         /* K6s reports MCEs but don't actually have all the MSRs */
 434         if (c->x86 < 6)
 435                 clear_cpu_cap(c, X86_FEATURE_MCE);
 436 #endif
 437
 438         /* Enable workaround for FXSAVE leak */
 439         if (c->x86 >= 6)
 440                 set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
 441
 442         if (!c->x86_model_id[0]) {
 443                 switch (c->x86) {
 444                 case 0xf:
 445                         /* Should distinguish Models here, but this is only
 446                            a fallback anyways. */
 447                         strcpy(c->x86_model_id, "Hammer");
 448                         break;
 449                 }
 450         }
 451
 452         display_cacheinfo(c);
 453
 454         /* Multi core CPU? */
 455         if (c->extended_cpuid_level >= 0x80000008) {
 456                 amd_detect_cmp(c);
 457                 srat_detect_node(c);
 458         }
 459
 460 #ifdef CONFIG_X86_32
 461         detect_ht(c);
 462 #endif
 463
 464         if (c->extended_cpuid_level >= 0x80000006) {
 465                 if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000))
 466                         num_cache_leaves = 4;
 467                 else
 468                         num_cache_leaves = 3;
 469         }
 470
 471         if (c->x86 >= 0xf && c->x86 <= 0x11)
 472                 set_cpu_cap(c, X86_FEATURE_K8);
 473
 474         if (cpu_has_xmm2) {
 475                 /* MFENCE stops RDTSC speculation */
 476                 set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
 477         }
 478
 479 #ifdef CONFIG_X86_64
 480         if (c->x86 == 0x10) {
 481                 /* do this for boot cpu */
 482                 if (c == &boot_cpu_data)
 483                         check_enable_amd_mmconf_dmi();
 484
 485                 fam10h_check_enable_mmcfg();
 486         }
 487
 488         if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
 489                 unsigned long long tseg;
 490
 491                 /*
 492                  * Split up direct mapping around the TSEG SMM area.
 493                  * Don't do it for gbpages because there seems very little
 494                  * benefit in doing so.
 495                  */
 496                 if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
 497                     printk(KERN_DEBUG "tseg: %010llx\n", tseg);
 498                     if ((tseg>>PMD_SHIFT) <
 499                                 (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
 500                         ((tseg>>PMD_SHIFT) <
 501                                 (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
 502                          (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
 503                         set_memory_4k((unsigned long)__va(tseg), 1);
 504                 }
 505         }
 506 #endif
 507 }
 508
 509 #ifdef CONFIG_X86_32
 510 static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 511 {
 512         /* AMD errata T13 (order #21922) */
 513         if ((c->x86 == 6)) {
 514                 if (c->x86_model == 3 && c->x86_mask == 0)      /* Duron Rev A0 */
 515                         size = 64;
 516                 if (c->x86_model == 4 &&
 517                     (c->x86_mask == 0 || c->x86_mask == 1))     /* Tbird rev A1/A2 */
 518                         size = 256;
 519         }
 520         return size;
 521 }
 522 #endif
 523
 524 static const struct cpu_dev __cpuinitconst amd_cpu_dev = {
 525         .c_vendor       = "AMD",
 526         .c_ident        = { "AuthenticAMD" },
 527 #ifdef CONFIG_X86_32
 528         .c_models = {
 529                 { .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
 530                   {
 531                           [3] = "486 DX/2",
 532                           [7] = "486 DX/2-WB",
 533                           [8] = "486 DX/4",
 534                           [9] = "486 DX/4-WB",
 535                           [14] = "Am5x86-WT",
 536                           [15] = "Am5x86-WB"
 537                   }
 538                 },
 539         },
 540         .c_size_cache   = amd_size_cache,
 541 #endif
 542         .c_early_init   = early_init_amd,
 543         .c_init         = init_amd,
 544         .c_x86_vendor   = X86_VENDOR_AMD,
 545 };
 546
 547 cpu_dev_register(amd_cpu_dev);