include/linux/ethtool.h

   1 /*
   2  * ethtool.h: Defines for Linux ethtool.
   3  *
   4  * Copyright (C) 1998 David S. Miller (davem@redhat.com)
   5  * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
   6  * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
   7  * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
   8  *                                christopher.leech@intel.com,
   9  *                                scott.feldman@intel.com)
  10  * Portions Copyright (C) Sun Microsystems 2008
  11  */
  12
  13 #ifndef _LINUX_ETHTOOL_H
  14 #define _LINUX_ETHTOOL_H
  15
  16 #include <linux/types.h>
  17
  18 /* This should work for both 32 and 64 bit userland. */
  19 struct ethtool_cmd {
  20         __u32   cmd;
  21         __u32   supported;      /* Features this interface supports */
  22         __u32   advertising;    /* Features this interface advertises */
  23         __u16   speed;          /* The forced speed, 10Mb, 100Mb, gigabit */
  24         __u8    duplex;         /* Duplex, half or full */
  25         __u8    port;           /* Which connector port */
  26         __u8    phy_address;
  27         __u8    transceiver;    /* Which transceiver to use */
  28         __u8    autoneg;        /* Enable or disable autonegotiation */
  29         __u8    mdio_support;
  30         __u32   maxtxpkt;       /* Tx pkts before generating tx int */
  31         __u32   maxrxpkt;       /* Rx pkts before generating rx int */
  32         __u16   speed_hi;
  33         __u8    eth_tp_mdix;
  34         __u8    reserved2;
  35         __u32   lp_advertising; /* Features the link partner advertises */
  36         __u32   reserved[2];
  37 };
  38
  39 static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
  40                                                 __u32 speed)
  41 {
  42
  43         ep->speed = (__u16)speed;
  44         ep->speed_hi = (__u16)(speed >> 16);
  45 }
  46
  47 static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
  48 {
  49         return (ep->speed_hi << 16) | ep->speed;
  50 }
  51
  52 #define ETHTOOL_BUSINFO_LEN     32
  53 /* these strings are set to whatever the driver author decides... */
  54 struct ethtool_drvinfo {
  55         __u32   cmd;
  56         char    driver[32];     /* driver short name, "tulip", "eepro100" */
  57         char    version[32];    /* driver version string */
  58         char    fw_version[32]; /* firmware version string, if applicable */
  59         char    bus_info[ETHTOOL_BUSINFO_LEN];  /* Bus info for this IF. */
  60                                 /* For PCI devices, use pci_name(pci_dev). */
  61         char    reserved1[32];
  62         char    reserved2[12];
  63         __u32   n_priv_flags;   /* number of flags valid in ETHTOOL_GPFLAGS */
  64         __u32   n_stats;        /* number of u64's from ETHTOOL_GSTATS */
  65         __u32   testinfo_len;
  66         __u32   eedump_len;     /* Size of data from ETHTOOL_GEEPROM (bytes) */
  67         __u32   regdump_len;    /* Size of data from ETHTOOL_GREGS (bytes) */
  68 };
  69
  70 #define SOPASS_MAX      6
  71 /* wake-on-lan settings */
  72 struct ethtool_wolinfo {
  73         __u32   cmd;
  74         __u32   supported;
  75         __u32   wolopts;
  76         __u8    sopass[SOPASS_MAX]; /* SecureOn(tm) password */
  77 };
  78
  79 /* for passing single values */
  80 struct ethtool_value {
  81         __u32   cmd;
  82         __u32   data;
  83 };
  84
  85 /* for passing big chunks of data */
  86 struct ethtool_regs {
  87         __u32   cmd;
  88         __u32   version; /* driver-specific, indicates different chips/revs */
  89         __u32   len; /* bytes */
  90         __u8    data[0];
  91 };
  92
  93 /* for passing EEPROM chunks */
  94 struct ethtool_eeprom {
  95         __u32   cmd;
  96         __u32   magic;
  97         __u32   offset; /* in bytes */
  98         __u32   len; /* in bytes */
  99         __u8    data[0];
 100 };
 101
 102 /* for configuring coalescing parameters of chip */
 103 struct ethtool_coalesce {
 104         __u32   cmd;    /* ETHTOOL_{G,S}COALESCE */
 105
 106         /* How many usecs to delay an RX interrupt after
 107          * a packet arrives.  If 0, only rx_max_coalesced_frames
 108          * is used.
 109          */
 110         __u32   rx_coalesce_usecs;
 111
 112         /* How many packets to delay an RX interrupt after
 113          * a packet arrives.  If 0, only rx_coalesce_usecs is
 114          * used.  It is illegal to set both usecs and max frames
 115          * to zero as this would cause RX interrupts to never be
 116          * generated.
 117          */
 118         __u32   rx_max_coalesced_frames;
 119
 120         /* Same as above two parameters, except that these values
 121          * apply while an IRQ is being serviced by the host.  Not
 122          * all cards support this feature and the values are ignored
 123          * in that case.
 124          */
 125         __u32   rx_coalesce_usecs_irq;
 126         __u32   rx_max_coalesced_frames_irq;
 127
 128         /* How many usecs to delay a TX interrupt after
 129          * a packet is sent.  If 0, only tx_max_coalesced_frames
 130          * is used.
 131          */
 132         __u32   tx_coalesce_usecs;
 133
 134         /* How many packets to delay a TX interrupt after
 135          * a packet is sent.  If 0, only tx_coalesce_usecs is
 136          * used.  It is illegal to set both usecs and max frames
 137          * to zero as this would cause TX interrupts to never be
 138          * generated.
 139          */
 140         __u32   tx_max_coalesced_frames;
 141
 142         /* Same as above two parameters, except that these values
 143          * apply while an IRQ is being serviced by the host.  Not
 144          * all cards support this feature and the values are ignored
 145          * in that case.
 146          */
 147         __u32   tx_coalesce_usecs_irq;
 148         __u32   tx_max_coalesced_frames_irq;
 149
 150         /* How many usecs to delay in-memory statistics
 151          * block updates.  Some drivers do not have an in-memory
 152          * statistic block, and in such cases this value is ignored.
 153          * This value must not be zero.
 154          */
 155         __u32   stats_block_coalesce_usecs;
 156
 157         /* Adaptive RX/TX coalescing is an algorithm implemented by
 158          * some drivers to improve latency under low packet rates and
 159          * improve throughput under high packet rates.  Some drivers
 160          * only implement one of RX or TX adaptive coalescing.  Anything
 161          * not implemented by the driver causes these values to be
 162          * silently ignored.
 163          */
 164         __u32   use_adaptive_rx_coalesce;
 165         __u32   use_adaptive_tx_coalesce;
 166
 167         /* When the packet rate (measured in packets per second)
 168          * is below pkt_rate_low, the {rx,tx}_*_low parameters are
 169          * used.
 170          */
 171         __u32   pkt_rate_low;
 172         __u32   rx_coalesce_usecs_low;
 173         __u32   rx_max_coalesced_frames_low;
 174         __u32   tx_coalesce_usecs_low;
 175         __u32   tx_max_coalesced_frames_low;
 176
 177         /* When the packet rate is below pkt_rate_high but above
 178          * pkt_rate_low (both measured in packets per second) the
 179          * normal {rx,tx}_* coalescing parameters are used.
 180          */
 181
 182         /* When the packet rate is (measured in packets per second)
 183          * is above pkt_rate_high, the {rx,tx}_*_high parameters are
 184          * used.
 185          */
 186         __u32   pkt_rate_high;
 187         __u32   rx_coalesce_usecs_high;
 188         __u32   rx_max_coalesced_frames_high;
 189         __u32   tx_coalesce_usecs_high;
 190         __u32   tx_max_coalesced_frames_high;
 191
 192         /* How often to do adaptive coalescing packet rate sampling,
 193          * measured in seconds.  Must not be zero.
 194          */
 195         __u32   rate_sample_interval;
 196 };
 197
 198 /* for configuring RX/TX ring parameters */
 199 struct ethtool_ringparam {
 200         __u32   cmd;    /* ETHTOOL_{G,S}RINGPARAM */
 201
 202         /* Read only attributes.  These indicate the maximum number
 203          * of pending RX/TX ring entries the driver will allow the
 204          * user to set.
 205          */
 206         __u32   rx_max_pending;
 207         __u32   rx_mini_max_pending;
 208         __u32   rx_jumbo_max_pending;
 209         __u32   tx_max_pending;
 210
 211         /* Values changeable by the user.  The valid values are
 212          * in the range 1 to the "*_max_pending" counterpart above.
 213          */
 214         __u32   rx_pending;
 215         __u32   rx_mini_pending;
 216         __u32   rx_jumbo_pending;
 217         __u32   tx_pending;
 218 };
 219
 220 /* for configuring link flow control parameters */
 221 struct ethtool_pauseparam {
 222         __u32   cmd;    /* ETHTOOL_{G,S}PAUSEPARAM */
 223
 224         /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
 225          * being true) the user may set 'autonet' here non-zero to have the
 226          * pause parameters be auto-negotiated too.  In such a case, the
 227          * {rx,tx}_pause values below determine what capabilities are
 228          * advertised.
 229          *
 230          * If 'autoneg' is zero or the link is not being auto-negotiated,
 231          * then {rx,tx}_pause force the driver to use/not-use pause
 232          * flow control.
 233          */
 234         __u32   autoneg;
 235         __u32   rx_pause;
 236         __u32   tx_pause;
 237 };
 238
 239 #define ETH_GSTRING_LEN         32
 240 enum ethtool_stringset {
 241         ETH_SS_TEST             = 0,
 242         ETH_SS_STATS,
 243         ETH_SS_PRIV_FLAGS,
 244 };
 245
 246 /* for passing string sets for data tagging */
 247 struct ethtool_gstrings {
 248         __u32   cmd;            /* ETHTOOL_GSTRINGS */
 249         __u32   string_set;     /* string set id e.c. ETH_SS_TEST, etc*/
 250         __u32   len;            /* number of strings in the string set */
 251         __u8    data[0];
 252 };
 253
 254 enum ethtool_test_flags {
 255         ETH_TEST_FL_OFFLINE     = (1 << 0),     /* online / offline */
 256         ETH_TEST_FL_FAILED      = (1 << 1),     /* test passed / failed */
 257 };
 258
 259 /* for requesting NIC test and getting results*/
 260 struct ethtool_test {
 261         __u32   cmd;            /* ETHTOOL_TEST */
 262         __u32   flags;          /* ETH_TEST_FL_xxx */
 263         __u32   reserved;
 264         __u32   len;            /* result length, in number of u64 elements */
 265         __u64   data[0];
 266 };
 267
 268 /* for dumping NIC-specific statistics */
 269 struct ethtool_stats {
 270         __u32   cmd;            /* ETHTOOL_GSTATS */
 271         __u32   n_stats;        /* number of u64's being returned */
 272         __u64   data[0];
 273 };
 274
 275 struct ethtool_perm_addr {
 276         __u32   cmd;            /* ETHTOOL_GPERMADDR */
 277         __u32   size;
 278         __u8    data[0];
 279 };
 280
 281 /* boolean flags controlling per-interface behavior characteristics.
 282  * When reading, the flag indicates whether or not a certain behavior
 283  * is enabled/present.  When writing, the flag indicates whether
 284  * or not the driver should turn on (set) or off (clear) a behavior.
 285  *
 286  * Some behaviors may read-only (unconditionally absent or present).
 287  * If such is the case, return EINVAL in the set-flags operation if the
 288  * flag differs from the read-only value.
 289  */
 290 enum ethtool_flags {
 291         ETH_FLAG_LRO            = (1 << 15),    /* LRO is enabled */
 292 };
 293
 294 /* The following structures are for supporting RX network flow
 295  * classification configuration. Note, all multibyte fields, e.g.,
 296  * ip4src, ip4dst, psrc, pdst, spi, etc. are expected to be in network
 297  * byte order.
 298  */
 299 struct ethtool_tcpip4_spec {
 300         __be32  ip4src;
 301         __be32  ip4dst;
 302         __be16  psrc;
 303         __be16  pdst;
 304         __u8    tos;
 305 };
 306
 307 struct ethtool_ah_espip4_spec {
 308         __be32  ip4src;
 309         __be32  ip4dst;
 310         __be32  spi;
 311         __u8    tos;
 312 };
 313
 314 struct ethtool_rawip4_spec {
 315         __be32  ip4src;
 316         __be32  ip4dst;
 317         __u8    hdata[64];
 318 };
 319
 320 struct ethtool_ether_spec {
 321         __be16  ether_type;
 322         __u8    frame_size;
 323         __u8    eframe[16];
 324 };
 325
 326 #define ETH_RX_NFC_IP4  1
 327 #define ETH_RX_NFC_IP6  2
 328
 329 struct ethtool_usrip4_spec {
 330         __be32  ip4src;
 331         __be32  ip4dst;
 332         __be32  l4_4_bytes;
 333         __u8    tos;
 334         __u8    ip_ver;
 335         __u8    proto;
 336 };
 337
 338 struct ethtool_rx_flow_spec {
 339         __u32           flow_type;
 340         union {
 341                 struct ethtool_tcpip4_spec              tcp_ip4_spec;
 342                 struct ethtool_tcpip4_spec              udp_ip4_spec;
 343                 struct ethtool_tcpip4_spec              sctp_ip4_spec;
 344                 struct ethtool_ah_espip4_spec           ah_ip4_spec;
 345                 struct ethtool_ah_espip4_spec           esp_ip4_spec;
 346                 struct ethtool_rawip4_spec              raw_ip4_spec;
 347                 struct ethtool_ether_spec               ether_spec;
 348                 struct ethtool_usrip4_spec              usr_ip4_spec;
 349                 __u8                                    hdata[64];
 350         } h_u, m_u; /* entry, mask */
 351         __u64           ring_cookie;
 352         __u32           location;
 353 };
 354
 355 struct ethtool_rxnfc {
 356         __u32                           cmd;
 357         __u32                           flow_type;
 358         /* The rx flow hash value or the rule DB size */
 359         __u64                           data;
 360         struct ethtool_rx_flow_spec     fs;
 361         __u32                           rule_cnt;
 362         __u32                           rule_locs[0];
 363 };
 364
 365 #ifdef __KERNEL__
 366
 367 struct net_device;
 368
 369 /* Some generic methods drivers may use in their ethtool_ops */
 370 u32 ethtool_op_get_link(struct net_device *dev);
 371 u32 ethtool_op_get_tx_csum(struct net_device *dev);
 372 int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
 373 int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data);
 374 int ethtool_op_set_tx_ipv6_csum(struct net_device *dev, u32 data);
 375 u32 ethtool_op_get_sg(struct net_device *dev);
 376 int ethtool_op_set_sg(struct net_device *dev, u32 data);
 377 u32 ethtool_op_get_tso(struct net_device *dev);
 378 int ethtool_op_set_tso(struct net_device *dev, u32 data);
 379 u32 ethtool_op_get_ufo(struct net_device *dev);
 380 int ethtool_op_set_ufo(struct net_device *dev, u32 data);
 381 u32 ethtool_op_get_flags(struct net_device *dev);
 382 int ethtool_op_set_flags(struct net_device *dev, u32 data);
 383
 384 /**
 385  * &ethtool_ops - Alter and report network device settings
 386  * get_settings: Get device-specific settings
 387  * set_settings: Set device-specific settings
 388  * get_drvinfo: Report driver information
 389  * get_regs: Get device registers
 390  * get_wol: Report whether Wake-on-Lan is enabled
 391  * set_wol: Turn Wake-on-Lan on or off
 392  * get_msglevel: Report driver message level
 393  * set_msglevel: Set driver message level
 394  * nway_reset: Restart autonegotiation
 395  * get_link: Get link status
 396  * get_eeprom: Read data from the device EEPROM
 397  * set_eeprom: Write data to the device EEPROM
 398  * get_coalesce: Get interrupt coalescing parameters
 399  * set_coalesce: Set interrupt coalescing parameters
 400  * get_ringparam: Report ring sizes
 401  * set_ringparam: Set ring sizes
 402  * get_pauseparam: Report pause parameters
 403  * set_pauseparam: Set pause parameters
 404  * get_rx_csum: Report whether receive checksums are turned on or off
 405  * set_rx_csum: Turn receive checksum on or off
 406  * get_tx_csum: Report whether transmit checksums are turned on or off
 407  * set_tx_csum: Turn transmit checksums on or off
 408  * get_sg: Report whether scatter-gather is enabled
 409  * set_sg: Turn scatter-gather on or off
 410  * get_tso: Report whether TCP segmentation offload is enabled
 411  * set_tso: Turn TCP segmentation offload on or off
 412  * get_ufo: Report whether UDP fragmentation offload is enabled
 413  * set_ufo: Turn UDP fragmentation offload on or off
 414  * self_test: Run specified self-tests
 415  * get_strings: Return a set of strings that describe the requested objects
 416  * phys_id: Identify the device
 417  * get_stats: Return statistics about the device
 418  * get_flags: get 32-bit flags bitmap
 419  * set_flags: set 32-bit flags bitmap
 420  *
 421  * Description:
 422  *
 423  * get_settings:
 424  *      @get_settings is passed an &ethtool_cmd to fill in.  It returns
 425  *      an negative errno or zero.
 426  *
 427  * set_settings:
 428  *      @set_settings is passed an &ethtool_cmd and should attempt to set
 429  *      all the settings this device supports.  It may return an error value
 430  *      if something goes wrong (otherwise 0).
 431  *
 432  * get_eeprom:
 433  *      Should fill in the magic field.  Don't need to check len for zero
 434  *      or wraparound.  Fill in the data argument with the eeprom values
 435  *      from offset to offset + len.  Update len to the amount read.
 436  *      Returns an error or zero.
 437  *
 438  * set_eeprom:
 439  *      Should validate the magic field.  Don't need to check len for zero
 440  *      or wraparound.  Update len to the amount written.  Returns an error
 441  *      or zero.
 442  */
 443 struct ethtool_ops {
 444         int     (*get_settings)(struct net_device *, struct ethtool_cmd *);
 445         int     (*set_settings)(struct net_device *, struct ethtool_cmd *);
 446         void    (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
 447         int     (*get_regs_len)(struct net_device *);
 448         void    (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
 449         void    (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
 450         int     (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
 451         u32     (*get_msglevel)(struct net_device *);
 452         void    (*set_msglevel)(struct net_device *, u32);
 453         int     (*nway_reset)(struct net_device *);
 454         u32     (*get_link)(struct net_device *);
 455         int     (*get_eeprom_len)(struct net_device *);
 456         int     (*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
 457         int     (*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
 458         int     (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
 459         int     (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
 460         void    (*get_ringparam)(struct net_device *, struct ethtool_ringparam *);
 461         int     (*set_ringparam)(struct net_device *, struct ethtool_ringparam *);
 462         void    (*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
 463         int     (*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
 464         u32     (*get_rx_csum)(struct net_device *);
 465         int     (*set_rx_csum)(struct net_device *, u32);
 466         u32     (*get_tx_csum)(struct net_device *);
 467         int     (*set_tx_csum)(struct net_device *, u32);
 468         u32     (*get_sg)(struct net_device *);
 469         int     (*set_sg)(struct net_device *, u32);
 470         u32     (*get_tso)(struct net_device *);
 471         int     (*set_tso)(struct net_device *, u32);
 472         void    (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
 473         void    (*get_strings)(struct net_device *, u32 stringset, u8 *);
 474         int     (*phys_id)(struct net_device *, u32);
 475         void    (*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *);
 476         int     (*begin)(struct net_device *);
 477         void    (*complete)(struct net_device *);
 478         u32     (*get_ufo)(struct net_device *);
 479         int     (*set_ufo)(struct net_device *, u32);
 480         u32     (*get_flags)(struct net_device *);
 481         int     (*set_flags)(struct net_device *, u32);
 482         u32     (*get_priv_flags)(struct net_device *);
 483         int     (*set_priv_flags)(struct net_device *, u32);
 484         int     (*get_sset_count)(struct net_device *, int);
 485
 486         /* the following hooks are obsolete */
 487         int     (*self_test_count)(struct net_device *);/* use get_sset_count */
 488         int     (*get_stats_count)(struct net_device *);/* use get_sset_count */
 489         int     (*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *);
 490         int     (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
 491 };
 492 #endif /* __KERNEL__ */
 493
 494 /* CMDs currently supported */
 495 #define ETHTOOL_GSET            0x00000001 /* Get settings. */
 496 #define ETHTOOL_SSET            0x00000002 /* Set settings. */
 497 #define ETHTOOL_GDRVINFO        0x00000003 /* Get driver info. */
 498 #define ETHTOOL_GREGS           0x00000004 /* Get NIC registers. */
 499 #define ETHTOOL_GWOL            0x00000005 /* Get wake-on-lan options. */
 500 #define ETHTOOL_SWOL            0x00000006 /* Set wake-on-lan options. */
 501 #define ETHTOOL_GMSGLVL         0x00000007 /* Get driver message level */
 502 #define ETHTOOL_SMSGLVL         0x00000008 /* Set driver msg level. */
 503 #define ETHTOOL_NWAY_RST        0x00000009 /* Restart autonegotiation. */
 504 #define ETHTOOL_GLINK           0x0000000a /* Get link status (ethtool_value) */
 505 #define ETHTOOL_GEEPROM         0x0000000b /* Get EEPROM data */
 506 #define ETHTOOL_SEEPROM         0x0000000c /* Set EEPROM data. */
 507 #define ETHTOOL_GCOALESCE       0x0000000e /* Get coalesce config */
 508 #define ETHTOOL_SCOALESCE       0x0000000f /* Set coalesce config. */
 509 #define ETHTOOL_GRINGPARAM      0x00000010 /* Get ring parameters */
 510 #define ETHTOOL_SRINGPARAM      0x00000011 /* Set ring parameters. */
 511 #define ETHTOOL_GPAUSEPARAM     0x00000012 /* Get pause parameters */
 512 #define ETHTOOL_SPAUSEPARAM     0x00000013 /* Set pause parameters. */
 513 #define ETHTOOL_GRXCSUM         0x00000014 /* Get RX hw csum enable (ethtool_value) */
 514 #define ETHTOOL_SRXCSUM         0x00000015 /* Set RX hw csum enable (ethtool_value) */
 515 #define ETHTOOL_GTXCSUM         0x00000016 /* Get TX hw csum enable (ethtool_value) */
 516 #define ETHTOOL_STXCSUM         0x00000017 /* Set TX hw csum enable (ethtool_value) */
 517 #define ETHTOOL_GSG             0x00000018 /* Get scatter-gather enable
 518                                             * (ethtool_value) */
 519 #define ETHTOOL_SSG             0x00000019 /* Set scatter-gather enable
 520                                             * (ethtool_value). */
 521 #define ETHTOOL_TEST            0x0000001a /* execute NIC self-test. */
 522 #define ETHTOOL_GSTRINGS        0x0000001b /* get specified string set */
 523 #define ETHTOOL_PHYS_ID         0x0000001c /* identify the NIC */
 524 #define ETHTOOL_GSTATS          0x0000001d /* get NIC-specific statistics */
 525 #define ETHTOOL_GTSO            0x0000001e /* Get TSO enable (ethtool_value) */
 526 #define ETHTOOL_STSO            0x0000001f /* Set TSO enable (ethtool_value) */
 527 #define ETHTOOL_GPERMADDR       0x00000020 /* Get permanent hardware address */
 528 #define ETHTOOL_GUFO            0x00000021 /* Get UFO enable (ethtool_value) */
 529 #define ETHTOOL_SUFO            0x00000022 /* Set UFO enable (ethtool_value) */
 530 #define ETHTOOL_GGSO            0x00000023 /* Get GSO enable (ethtool_value) */
 531 #define ETHTOOL_SGSO            0x00000024 /* Set GSO enable (ethtool_value) */
 532 #define ETHTOOL_GFLAGS          0x00000025 /* Get flags bitmap(ethtool_value) */
 533 #define ETHTOOL_SFLAGS          0x00000026 /* Set flags bitmap(ethtool_value) */
 534 #define ETHTOOL_GPFLAGS         0x00000027 /* Get driver-private flags bitmap */
 535 #define ETHTOOL_SPFLAGS         0x00000028 /* Set driver-private flags bitmap */
 536
 537 #define ETHTOOL_GRXFH           0x00000029 /* Get RX flow hash configuration */
 538 #define ETHTOOL_SRXFH           0x0000002a /* Set RX flow hash configuration */
 539 #define ETHTOOL_GGRO            0x0000002b /* Get GRO enable (ethtool_value) */
 540 #define ETHTOOL_SGRO            0x0000002c /* Set GRO enable (ethtool_value) */
 541 #define ETHTOOL_GRXRINGS        0x0000002d /* Get RX rings available for LB */
 542 #define ETHTOOL_GRXCLSRLCNT     0x0000002e /* Get RX class rule count */
 543 #define ETHTOOL_GRXCLSRULE      0x0000002f /* Get RX classification rule */
 544 #define ETHTOOL_GRXCLSRLALL     0x00000030 /* Get all RX classification rule */
 545 #define ETHTOOL_SRXCLSRLDEL     0x00000031 /* Delete RX classification rule */
 546 #define ETHTOOL_SRXCLSRLINS     0x00000032 /* Insert RX classification rule */
 547
 548 /* compatibility with older code */
 549 #define SPARC_ETH_GSET          ETHTOOL_GSET
 550 #define SPARC_ETH_SSET          ETHTOOL_SSET
 551
 552 /* Indicates what features are supported by the interface. */
 553 #define SUPPORTED_10baseT_Half          (1 << 0)
 554 #define SUPPORTED_10baseT_Full          (1 << 1)
 555 #define SUPPORTED_100baseT_Half         (1 << 2)
 556 #define SUPPORTED_100baseT_Full         (1 << 3)
 557 #define SUPPORTED_1000baseT_Half        (1 << 4)
 558 #define SUPPORTED_1000baseT_Full        (1 << 5)
 559 #define SUPPORTED_Autoneg               (1 << 6)
 560 #define SUPPORTED_TP                    (1 << 7)
 561 #define SUPPORTED_AUI                   (1 << 8)
 562 #define SUPPORTED_MII                   (1 << 9)
 563 #define SUPPORTED_FIBRE                 (1 << 10)
 564 #define SUPPORTED_BNC                   (1 << 11)
 565 #define SUPPORTED_10000baseT_Full       (1 << 12)
 566 #define SUPPORTED_Pause                 (1 << 13)
 567 #define SUPPORTED_Asym_Pause            (1 << 14)
 568 #define SUPPORTED_2500baseX_Full        (1 << 15)
 569 #define SUPPORTED_Backplane             (1 << 16)
 570 #define SUPPORTED_1000baseKX_Full       (1 << 17)
 571 #define SUPPORTED_10000baseKX4_Full     (1 << 18)
 572 #define SUPPORTED_10000baseKR_Full      (1 << 19)
 573 #define SUPPORTED_10000baseR_FEC        (1 << 20)
 574
 575 /* Indicates what features are advertised by the interface. */
 576 #define ADVERTISED_10baseT_Half         (1 << 0)
 577 #define ADVERTISED_10baseT_Full         (1 << 1)
 578 #define ADVERTISED_100baseT_Half        (1 << 2)
 579 #define ADVERTISED_100baseT_Full        (1 << 3)
 580 #define ADVERTISED_1000baseT_Half       (1 << 4)
 581 #define ADVERTISED_1000baseT_Full       (1 << 5)
 582 #define ADVERTISED_Autoneg              (1 << 6)
 583 #define ADVERTISED_TP                   (1 << 7)
 584 #define ADVERTISED_AUI                  (1 << 8)
 585 #define ADVERTISED_MII                  (1 << 9)
 586 #define ADVERTISED_FIBRE                (1 << 10)
 587 #define ADVERTISED_BNC                  (1 << 11)
 588 #define ADVERTISED_10000baseT_Full      (1 << 12)
 589 #define ADVERTISED_Pause                (1 << 13)
 590 #define ADVERTISED_Asym_Pause           (1 << 14)
 591 #define ADVERTISED_2500baseX_Full       (1 << 15)
 592 #define ADVERTISED_Backplane            (1 << 16)
 593 #define ADVERTISED_1000baseKX_Full      (1 << 17)
 594 #define ADVERTISED_10000baseKX4_Full    (1 << 18)
 595 #define ADVERTISED_10000baseKR_Full     (1 << 19)
 596 #define ADVERTISED_10000baseR_FEC       (1 << 20)
 597
 598 /* The following are all involved in forcing a particular link
 599  * mode for the device for setting things.  When getting the
 600  * devices settings, these indicate the current mode and whether
 601  * it was foced up into this mode or autonegotiated.
 602  */
 603
 604 /* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
 605 #define SPEED_10                10
 606 #define SPEED_100               100
 607 #define SPEED_1000              1000
 608 #define SPEED_2500              2500
 609 #define SPEED_10000             10000
 610
 611 /* Duplex, half or full. */
 612 #define DUPLEX_HALF             0x00
 613 #define DUPLEX_FULL             0x01
 614
 615 /* Which connector port. */
 616 #define PORT_TP                 0x00
 617 #define PORT_AUI                0x01
 618 #define PORT_MII                0x02
 619 #define PORT_FIBRE              0x03
 620 #define PORT_BNC                0x04
 621 #define PORT_OTHER              0xff
 622
 623 /* Which transceiver to use. */
 624 #define XCVR_INTERNAL           0x00
 625 #define XCVR_EXTERNAL           0x01
 626 #define XCVR_DUMMY1             0x02
 627 #define XCVR_DUMMY2             0x03
 628 #define XCVR_DUMMY3             0x04
 629
 630 /* Enable or disable autonegotiation.  If this is set to enable,
 631  * the forced link modes above are completely ignored.
 632  */
 633 #define AUTONEG_DISABLE         0x00
 634 #define AUTONEG_ENABLE          0x01
 635
 636 /* Mode MDI or MDI-X */
 637 #define ETH_TP_MDI_INVALID      0x00
 638 #define ETH_TP_MDI              0x01
 639 #define ETH_TP_MDI_X            0x02
 640
 641 /* Wake-On-Lan options. */
 642 #define WAKE_PHY                (1 << 0)
 643 #define WAKE_UCAST              (1 << 1)
 644 #define WAKE_MCAST              (1 << 2)
 645 #define WAKE_BCAST              (1 << 3)
 646 #define WAKE_ARP                (1 << 4)
 647 #define WAKE_MAGIC              (1 << 5)
 648 #define WAKE_MAGICSECURE        (1 << 6) /* only meaningful if WAKE_MAGIC */
 649
 650 /* L3-L4 network traffic flow types */
 651 #define TCP_V4_FLOW     0x01
 652 #define UDP_V4_FLOW     0x02
 653 #define SCTP_V4_FLOW    0x03
 654 #define AH_ESP_V4_FLOW  0x04
 655 #define TCP_V6_FLOW     0x05
 656 #define UDP_V6_FLOW     0x06
 657 #define SCTP_V6_FLOW    0x07
 658 #define AH_ESP_V6_FLOW  0x08
 659 #define AH_V4_FLOW      0x09
 660 #define ESP_V4_FLOW     0x0a
 661 #define AH_V6_FLOW      0x0b
 662 #define ESP_V6_FLOW     0x0c
 663 #define IP_USER_FLOW    0x0d
 664
 665 /* L3-L4 network traffic flow hash options */
 666 #define RXH_L2DA        (1 << 1)
 667 #define RXH_VLAN        (1 << 2)
 668 #define RXH_L3_PROTO    (1 << 3)
 669 #define RXH_IP_SRC      (1 << 4)
 670 #define RXH_IP_DST      (1 << 5)
 671 #define RXH_L4_B_0_1    (1 << 6) /* src port in case of TCP/UDP/SCTP */
 672 #define RXH_L4_B_2_3    (1 << 7) /* dst port in case of TCP/UDP/SCTP */
 673 #define RXH_DISCARD     (1 << 31)
 674
 675 #define RX_CLS_FLOW_DISC        0xffffffffffffffffULL
 676
 677 #endif /* _LINUX_ETHTOOL_H */