3 * TI 3410/5052 USB Serial Driver
5 * Copyright (C) 2004 Texas Instruments
7 * This driver is based on the Linux io_ti driver, which is
8 * Copyright (C) 2000-2002 Inside Out Networks
9 * Copyright (C) 2001-2002 Greg Kroah-Hartman
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * For questions or problems with this driver, contact Texas Instruments
17 * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
18 * Peter Berger <pberger@brimson.com>.
21 #include <linux/kernel.h>
22 #include <linux/errno.h>
23 #include <linux/firmware.h>
24 #include <linux/init.h>
25 #include <linux/slab.h>
26 #include <linux/tty.h>
27 #include <linux/tty_driver.h>
28 #include <linux/tty_flip.h>
29 #include <linux/module.h>
30 #include <linux/spinlock.h>
31 #include <linux/ioctl.h>
32 #include <linux/serial.h>
33 #include <linux/circ_buf.h>
34 #include <linux/mutex.h>
35 #include <linux/uaccess.h>
36 #include <linux/usb.h>
37 #include <linux/usb/serial.h>
39 #include "ti_usb_3410_5052.h"
43 #define TI_DRIVER_VERSION "v0.9"
44 #define TI_DRIVER_AUTHOR "Al Borchers <alborchers@steinerpoint.com>"
45 #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver"
47 #define TI_FIRMWARE_BUF_SIZE 16284
49 #define TI_WRITE_BUF_SIZE 1024
51 #define TI_TRANSFER_TIMEOUT 2
53 #define TI_DEFAULT_LOW_LATENCY 0
54 #define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
56 /* supported setserial flags */
57 #define TI_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY)
60 #define TI_READ_URB_RUNNING 0
61 #define TI_READ_URB_STOPPING 1
62 #define TI_READ_URB_STOPPED 2
64 #define TI_EXTRA_VID_PID_COUNT 5
74 __u8 tp_uart_mode
; /* 232 or 485 modes */
75 unsigned int tp_uart_base_addr
;
77 int tp_closing_wait
;/* in .01 secs */
78 struct async_icount tp_icount
;
79 wait_queue_head_t tp_msr_wait
; /* wait for msr change */
80 wait_queue_head_t tp_write_wait
;
81 struct ti_device
*tp_tdev
;
82 struct usb_serial_port
*tp_port
;
84 int tp_read_urb_state
;
85 int tp_write_urb_in_use
;
86 struct circ_buf
*tp_write_buf
;
90 struct mutex td_open_close_lock
;
91 int td_open_port_count
;
92 struct usb_serial
*td_serial
;
98 /* Function Declarations */
100 static int ti_startup(struct usb_serial
*serial
);
101 static void ti_shutdown(struct usb_serial
*serial
);
102 static int ti_open(struct tty_struct
*tty
, struct usb_serial_port
*port
,
104 static void ti_close(struct tty_struct
*tty
, struct usb_serial_port
*port
,
106 static int ti_write(struct tty_struct
*tty
, struct usb_serial_port
*port
,
107 const unsigned char *data
, int count
);
108 static int ti_write_room(struct tty_struct
*tty
);
109 static int ti_chars_in_buffer(struct tty_struct
*tty
);
110 static void ti_throttle(struct tty_struct
*tty
);
111 static void ti_unthrottle(struct tty_struct
*tty
);
112 static int ti_ioctl(struct tty_struct
*tty
, struct file
*file
,
113 unsigned int cmd
, unsigned long arg
);
114 static void ti_set_termios(struct tty_struct
*tty
,
115 struct usb_serial_port
*port
, struct ktermios
*old_termios
);
116 static int ti_tiocmget(struct tty_struct
*tty
, struct file
*file
);
117 static int ti_tiocmset(struct tty_struct
*tty
, struct file
*file
,
118 unsigned int set
, unsigned int clear
);
119 static void ti_break(struct tty_struct
*tty
, int break_state
);
120 static void ti_interrupt_callback(struct urb
*urb
);
121 static void ti_bulk_in_callback(struct urb
*urb
);
122 static void ti_bulk_out_callback(struct urb
*urb
);
124 static void ti_recv(struct device
*dev
, struct tty_struct
*tty
,
125 unsigned char *data
, int length
);
126 static void ti_send(struct ti_port
*tport
);
127 static int ti_set_mcr(struct ti_port
*tport
, unsigned int mcr
);
128 static int ti_get_lsr(struct ti_port
*tport
);
129 static int ti_get_serial_info(struct ti_port
*tport
,
130 struct serial_struct __user
*ret_arg
);
131 static int ti_set_serial_info(struct tty_struct
*tty
, struct ti_port
*tport
,
132 struct serial_struct __user
*new_arg
);
133 static void ti_handle_new_msr(struct ti_port
*tport
, __u8 msr
);
135 static void ti_drain(struct ti_port
*tport
, unsigned long timeout
, int flush
);
137 static void ti_stop_read(struct ti_port
*tport
, struct tty_struct
*tty
);
138 static int ti_restart_read(struct ti_port
*tport
, struct tty_struct
*tty
);
140 static int ti_command_out_sync(struct ti_device
*tdev
, __u8 command
,
141 __u16 moduleid
, __u16 value
, __u8
*data
, int size
);
142 static int ti_command_in_sync(struct ti_device
*tdev
, __u8 command
,
143 __u16 moduleid
, __u16 value
, __u8
*data
, int size
);
145 static int ti_write_byte(struct ti_device
*tdev
, unsigned long addr
,
146 __u8 mask
, __u8 byte
);
148 static int ti_download_firmware(struct ti_device
*tdev
);
150 /* circular buffer */
151 static struct circ_buf
*ti_buf_alloc(void);
152 static void ti_buf_free(struct circ_buf
*cb
);
153 static void ti_buf_clear(struct circ_buf
*cb
);
154 static int ti_buf_data_avail(struct circ_buf
*cb
);
155 static int ti_buf_space_avail(struct circ_buf
*cb
);
156 static int ti_buf_put(struct circ_buf
*cb
, const char *buf
, int count
);
157 static int ti_buf_get(struct circ_buf
*cb
, char *buf
, int count
);
162 /* module parameters */
164 static int low_latency
= TI_DEFAULT_LOW_LATENCY
;
165 static int closing_wait
= TI_DEFAULT_CLOSING_WAIT
;
166 static ushort vendor_3410
[TI_EXTRA_VID_PID_COUNT
];
167 static unsigned int vendor_3410_count
;
168 static ushort product_3410
[TI_EXTRA_VID_PID_COUNT
];
169 static unsigned int product_3410_count
;
170 static ushort vendor_5052
[TI_EXTRA_VID_PID_COUNT
];
171 static unsigned int vendor_5052_count
;
172 static ushort product_5052
[TI_EXTRA_VID_PID_COUNT
];
173 static unsigned int product_5052_count
;
175 /* supported devices */
176 /* the array dimension is the number of default entries plus */
177 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
179 static struct usb_device_id ti_id_table_3410
[10+TI_EXTRA_VID_PID_COUNT
+1] = {
180 { USB_DEVICE(TI_VENDOR_ID
, TI_3410_PRODUCT_ID
) },
181 { USB_DEVICE(TI_VENDOR_ID
, TI_3410_EZ430_ID
) },
182 { USB_DEVICE(MTS_VENDOR_ID
, MTS_GSM_NO_FW_PRODUCT_ID
) },
183 { USB_DEVICE(MTS_VENDOR_ID
, MTS_CDMA_NO_FW_PRODUCT_ID
) },
184 { USB_DEVICE(MTS_VENDOR_ID
, MTS_CDMA_PRODUCT_ID
) },
185 { USB_DEVICE(MTS_VENDOR_ID
, MTS_GSM_PRODUCT_ID
) },
186 { USB_DEVICE(MTS_VENDOR_ID
, MTS_EDGE_PRODUCT_ID
) },
187 { USB_DEVICE(IBM_VENDOR_ID
, IBM_4543_PRODUCT_ID
) },
188 { USB_DEVICE(IBM_VENDOR_ID
, IBM_454B_PRODUCT_ID
) },
189 { USB_DEVICE(IBM_VENDOR_ID
, IBM_454C_PRODUCT_ID
) },
192 static struct usb_device_id ti_id_table_5052
[5+TI_EXTRA_VID_PID_COUNT
+1] = {
193 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_BOOT_PRODUCT_ID
) },
194 { USB_DEVICE(TI_VENDOR_ID
, TI_5152_BOOT_PRODUCT_ID
) },
195 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_EEPROM_PRODUCT_ID
) },
196 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_FIRMWARE_PRODUCT_ID
) },
197 { USB_DEVICE(IBM_VENDOR_ID
, IBM_4543_PRODUCT_ID
) },
200 static struct usb_device_id ti_id_table_combined
[14+2*TI_EXTRA_VID_PID_COUNT
+1] = {
201 { USB_DEVICE(TI_VENDOR_ID
, TI_3410_PRODUCT_ID
) },
202 { USB_DEVICE(TI_VENDOR_ID
, TI_3410_EZ430_ID
) },
203 { USB_DEVICE(MTS_VENDOR_ID
, MTS_GSM_NO_FW_PRODUCT_ID
) },
204 { USB_DEVICE(MTS_VENDOR_ID
, MTS_CDMA_NO_FW_PRODUCT_ID
) },
205 { USB_DEVICE(MTS_VENDOR_ID
, MTS_CDMA_PRODUCT_ID
) },
206 { USB_DEVICE(MTS_VENDOR_ID
, MTS_GSM_PRODUCT_ID
) },
207 { USB_DEVICE(MTS_VENDOR_ID
, MTS_EDGE_PRODUCT_ID
) },
208 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_BOOT_PRODUCT_ID
) },
209 { USB_DEVICE(TI_VENDOR_ID
, TI_5152_BOOT_PRODUCT_ID
) },
210 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_EEPROM_PRODUCT_ID
) },
211 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_FIRMWARE_PRODUCT_ID
) },
212 { USB_DEVICE(IBM_VENDOR_ID
, IBM_4543_PRODUCT_ID
) },
213 { USB_DEVICE(IBM_VENDOR_ID
, IBM_454B_PRODUCT_ID
) },
214 { USB_DEVICE(IBM_VENDOR_ID
, IBM_454C_PRODUCT_ID
) },
218 static struct usb_driver ti_usb_driver
= {
219 .name
= "ti_usb_3410_5052",
220 .probe
= usb_serial_probe
,
221 .disconnect
= usb_serial_disconnect
,
222 .id_table
= ti_id_table_combined
,
226 static struct usb_serial_driver ti_1port_device
= {
228 .owner
= THIS_MODULE
,
229 .name
= "ti_usb_3410_5052_1",
231 .description
= "TI USB 3410 1 port adapter",
232 .usb_driver
= &ti_usb_driver
,
233 .id_table
= ti_id_table_3410
,
235 .attach
= ti_startup
,
236 .shutdown
= ti_shutdown
,
240 .write_room
= ti_write_room
,
241 .chars_in_buffer
= ti_chars_in_buffer
,
242 .throttle
= ti_throttle
,
243 .unthrottle
= ti_unthrottle
,
245 .set_termios
= ti_set_termios
,
246 .tiocmget
= ti_tiocmget
,
247 .tiocmset
= ti_tiocmset
,
248 .break_ctl
= ti_break
,
249 .read_int_callback
= ti_interrupt_callback
,
250 .read_bulk_callback
= ti_bulk_in_callback
,
251 .write_bulk_callback
= ti_bulk_out_callback
,
254 static struct usb_serial_driver ti_2port_device
= {
256 .owner
= THIS_MODULE
,
257 .name
= "ti_usb_3410_5052_2",
259 .description
= "TI USB 5052 2 port adapter",
260 .usb_driver
= &ti_usb_driver
,
261 .id_table
= ti_id_table_5052
,
263 .attach
= ti_startup
,
264 .shutdown
= ti_shutdown
,
268 .write_room
= ti_write_room
,
269 .chars_in_buffer
= ti_chars_in_buffer
,
270 .throttle
= ti_throttle
,
271 .unthrottle
= ti_unthrottle
,
273 .set_termios
= ti_set_termios
,
274 .tiocmget
= ti_tiocmget
,
275 .tiocmset
= ti_tiocmset
,
276 .break_ctl
= ti_break
,
277 .read_int_callback
= ti_interrupt_callback
,
278 .read_bulk_callback
= ti_bulk_in_callback
,
279 .write_bulk_callback
= ti_bulk_out_callback
,
285 MODULE_AUTHOR(TI_DRIVER_AUTHOR
);
286 MODULE_DESCRIPTION(TI_DRIVER_DESC
);
287 MODULE_VERSION(TI_DRIVER_VERSION
);
288 MODULE_LICENSE("GPL");
290 MODULE_FIRMWARE("ti_3410.fw");
291 MODULE_FIRMWARE("ti_5052.fw");
292 MODULE_FIRMWARE("mts_cdma.fw");
293 MODULE_FIRMWARE("mts_gsm.fw");
294 MODULE_FIRMWARE("mts_edge.fw");
296 module_param(debug
, bool, S_IRUGO
| S_IWUSR
);
297 MODULE_PARM_DESC(debug
, "Enable debugging, 0=no, 1=yes");
299 module_param(low_latency
, bool, S_IRUGO
| S_IWUSR
);
300 MODULE_PARM_DESC(low_latency
,
301 "TTY low_latency flag, 0=off, 1=on, default is off");
303 module_param(closing_wait
, int, S_IRUGO
| S_IWUSR
);
304 MODULE_PARM_DESC(closing_wait
,
305 "Maximum wait for data to drain in close, in .01 secs, default is 4000");
307 module_param_array(vendor_3410
, ushort
, &vendor_3410_count
, S_IRUGO
);
308 MODULE_PARM_DESC(vendor_3410
,
309 "Vendor ids for 3410 based devices, 1-5 short integers");
310 module_param_array(product_3410
, ushort
, &product_3410_count
, S_IRUGO
);
311 MODULE_PARM_DESC(product_3410
,
312 "Product ids for 3410 based devices, 1-5 short integers");
313 module_param_array(vendor_5052
, ushort
, &vendor_5052_count
, S_IRUGO
);
314 MODULE_PARM_DESC(vendor_5052
,
315 "Vendor ids for 5052 based devices, 1-5 short integers");
316 module_param_array(product_5052
, ushort
, &product_5052_count
, S_IRUGO
);
317 MODULE_PARM_DESC(product_5052
,
318 "Product ids for 5052 based devices, 1-5 short integers");
320 MODULE_DEVICE_TABLE(usb
, ti_id_table_combined
);
325 static int __init
ti_init(void)
330 /* insert extra vendor and product ids */
331 c
= ARRAY_SIZE(ti_id_table_combined
) - 2 * TI_EXTRA_VID_PID_COUNT
- 1;
332 j
= ARRAY_SIZE(ti_id_table_3410
) - TI_EXTRA_VID_PID_COUNT
- 1;
333 for (i
= 0; i
< min(vendor_3410_count
, product_3410_count
); i
++, j
++, c
++) {
334 ti_id_table_3410
[j
].idVendor
= vendor_3410
[i
];
335 ti_id_table_3410
[j
].idProduct
= product_3410
[i
];
336 ti_id_table_3410
[j
].match_flags
= USB_DEVICE_ID_MATCH_DEVICE
;
337 ti_id_table_combined
[c
].idVendor
= vendor_3410
[i
];
338 ti_id_table_combined
[c
].idProduct
= product_3410
[i
];
339 ti_id_table_combined
[c
].match_flags
= USB_DEVICE_ID_MATCH_DEVICE
;
341 j
= ARRAY_SIZE(ti_id_table_5052
) - TI_EXTRA_VID_PID_COUNT
- 1;
342 for (i
= 0; i
< min(vendor_5052_count
, product_5052_count
); i
++, j
++, c
++) {
343 ti_id_table_5052
[j
].idVendor
= vendor_5052
[i
];
344 ti_id_table_5052
[j
].idProduct
= product_5052
[i
];
345 ti_id_table_5052
[j
].match_flags
= USB_DEVICE_ID_MATCH_DEVICE
;
346 ti_id_table_combined
[c
].idVendor
= vendor_5052
[i
];
347 ti_id_table_combined
[c
].idProduct
= product_5052
[i
];
348 ti_id_table_combined
[c
].match_flags
= USB_DEVICE_ID_MATCH_DEVICE
;
351 ret
= usb_serial_register(&ti_1port_device
);
354 ret
= usb_serial_register(&ti_2port_device
);
358 ret
= usb_register(&ti_usb_driver
);
362 printk(KERN_INFO KBUILD_MODNAME
": " TI_DRIVER_VERSION
":"
363 TI_DRIVER_DESC
"\n");
368 usb_serial_deregister(&ti_2port_device
);
370 usb_serial_deregister(&ti_1port_device
);
376 static void __exit
ti_exit(void)
378 usb_serial_deregister(&ti_1port_device
);
379 usb_serial_deregister(&ti_2port_device
);
380 usb_deregister(&ti_usb_driver
);
384 module_init(ti_init
);
385 module_exit(ti_exit
);
388 static int ti_startup(struct usb_serial
*serial
)
390 struct ti_device
*tdev
;
391 struct ti_port
*tport
;
392 struct usb_device
*dev
= serial
->dev
;
397 dbg("%s - product 0x%4X, num configurations %d, configuration value %d",
398 __func__
, le16_to_cpu(dev
->descriptor
.idProduct
),
399 dev
->descriptor
.bNumConfigurations
,
400 dev
->actconfig
->desc
.bConfigurationValue
);
402 /* create device structure */
403 tdev
= kzalloc(sizeof(struct ti_device
), GFP_KERNEL
);
405 dev_err(&dev
->dev
, "%s - out of memory\n", __func__
);
408 mutex_init(&tdev
->td_open_close_lock
);
409 tdev
->td_serial
= serial
;
410 usb_set_serial_data(serial
, tdev
);
412 /* determine device type */
413 if (usb_match_id(serial
->interface
, ti_id_table_3410
))
414 tdev
->td_is_3410
= 1;
415 dbg("%s - device type is %s", __func__
,
416 tdev
->td_is_3410
? "3410" : "5052");
418 /* if we have only 1 configuration, download firmware */
419 if (dev
->descriptor
.bNumConfigurations
== 1) {
420 if ((status
= ti_download_firmware(tdev
)) != 0)
423 /* 3410 must be reset, 5052 resets itself */
424 if (tdev
->td_is_3410
) {
425 msleep_interruptible(100);
426 usb_reset_device(dev
);
433 /* the second configuration must be set */
434 if (dev
->actconfig
->desc
.bConfigurationValue
== TI_BOOT_CONFIG
) {
435 status
= usb_driver_set_configuration(dev
, TI_ACTIVE_CONFIG
);
436 status
= status
? status
: -ENODEV
;
440 /* set up port structures */
441 for (i
= 0; i
< serial
->num_ports
; ++i
) {
442 tport
= kzalloc(sizeof(struct ti_port
), GFP_KERNEL
);
444 dev_err(&dev
->dev
, "%s - out of memory\n", __func__
);
448 spin_lock_init(&tport
->tp_lock
);
449 tport
->tp_uart_base_addr
= (i
== 0 ?
450 TI_UART1_BASE_ADDR
: TI_UART2_BASE_ADDR
);
451 tport
->tp_flags
= low_latency
? ASYNC_LOW_LATENCY
: 0;
452 tport
->tp_closing_wait
= closing_wait
;
453 init_waitqueue_head(&tport
->tp_msr_wait
);
454 init_waitqueue_head(&tport
->tp_write_wait
);
455 tport
->tp_write_buf
= ti_buf_alloc();
456 if (tport
->tp_write_buf
== NULL
) {
457 dev_err(&dev
->dev
, "%s - out of memory\n", __func__
);
462 tport
->tp_port
= serial
->port
[i
];
463 tport
->tp_tdev
= tdev
;
464 usb_set_serial_port_data(serial
->port
[i
], tport
);
465 tport
->tp_uart_mode
= 0; /* default is RS232 */
471 for (--i
; i
>= 0; --i
) {
472 tport
= usb_get_serial_port_data(serial
->port
[i
]);
473 ti_buf_free(tport
->tp_write_buf
);
475 usb_set_serial_port_data(serial
->port
[i
], NULL
);
479 usb_set_serial_data(serial
, NULL
);
484 static void ti_shutdown(struct usb_serial
*serial
)
487 struct ti_device
*tdev
= usb_get_serial_data(serial
);
488 struct ti_port
*tport
;
492 for (i
= 0; i
< serial
->num_ports
; ++i
) {
493 tport
= usb_get_serial_port_data(serial
->port
[i
]);
495 ti_buf_free(tport
->tp_write_buf
);
497 usb_set_serial_port_data(serial
->port
[i
], NULL
);
502 usb_set_serial_data(serial
, NULL
);
506 static int ti_open(struct tty_struct
*tty
,
507 struct usb_serial_port
*port
, struct file
*file
)
509 struct ti_port
*tport
= usb_get_serial_port_data(port
);
510 struct ti_device
*tdev
;
511 struct usb_device
*dev
;
515 __u16 open_settings
= (__u8
)(TI_PIPE_MODE_CONTINOUS
|
516 TI_PIPE_TIMEOUT_ENABLE
|
517 (TI_TRANSFER_TIMEOUT
<< 2));
519 dbg("%s - port %d", __func__
, port
->number
);
524 dev
= port
->serial
->dev
;
525 tdev
= tport
->tp_tdev
;
527 /* only one open on any port on a device at a time */
528 if (mutex_lock_interruptible(&tdev
->td_open_close_lock
))
533 (tport
->tp_flags
& ASYNC_LOW_LATENCY
) ? 1 : 0;
535 port_number
= port
->number
- port
->serial
->minor
;
537 memset(&(tport
->tp_icount
), 0x00, sizeof(tport
->tp_icount
));
540 tport
->tp_shadow_mcr
|= (TI_MCR_RTS
| TI_MCR_DTR
);
542 /* start interrupt urb the first time a port is opened on this device */
543 if (tdev
->td_open_port_count
== 0) {
544 dbg("%s - start interrupt in urb", __func__
);
545 urb
= tdev
->td_serial
->port
[0]->interrupt_in_urb
;
547 dev_err(&port
->dev
, "%s - no interrupt urb\n",
552 urb
->complete
= ti_interrupt_callback
;
555 status
= usb_submit_urb(urb
, GFP_KERNEL
);
558 "%s - submit interrupt urb failed, %d\n",
565 ti_set_termios(tty
, port
, tty
->termios
);
567 dbg("%s - sending TI_OPEN_PORT", __func__
);
568 status
= ti_command_out_sync(tdev
, TI_OPEN_PORT
,
569 (__u8
)(TI_UART1_PORT
+ port_number
), open_settings
, NULL
, 0);
571 dev_err(&port
->dev
, "%s - cannot send open command, %d\n",
576 dbg("%s - sending TI_START_PORT", __func__
);
577 status
= ti_command_out_sync(tdev
, TI_START_PORT
,
578 (__u8
)(TI_UART1_PORT
+ port_number
), 0, NULL
, 0);
580 dev_err(&port
->dev
, "%s - cannot send start command, %d\n",
585 dbg("%s - sending TI_PURGE_PORT", __func__
);
586 status
= ti_command_out_sync(tdev
, TI_PURGE_PORT
,
587 (__u8
)(TI_UART1_PORT
+ port_number
), TI_PURGE_INPUT
, NULL
, 0);
589 dev_err(&port
->dev
, "%s - cannot clear input buffers, %d\n",
593 status
= ti_command_out_sync(tdev
, TI_PURGE_PORT
,
594 (__u8
)(TI_UART1_PORT
+ port_number
), TI_PURGE_OUTPUT
, NULL
, 0);
596 dev_err(&port
->dev
, "%s - cannot clear output buffers, %d\n",
601 /* reset the data toggle on the bulk endpoints to work around bug in
602 * host controllers where things get out of sync some times */
603 usb_clear_halt(dev
, port
->write_urb
->pipe
);
604 usb_clear_halt(dev
, port
->read_urb
->pipe
);
607 ti_set_termios(tty
, port
, tty
->termios
);
609 dbg("%s - sending TI_OPEN_PORT (2)", __func__
);
610 status
= ti_command_out_sync(tdev
, TI_OPEN_PORT
,
611 (__u8
)(TI_UART1_PORT
+ port_number
), open_settings
, NULL
, 0);
613 dev_err(&port
->dev
, "%s - cannot send open command (2), %d\n",
618 dbg("%s - sending TI_START_PORT (2)", __func__
);
619 status
= ti_command_out_sync(tdev
, TI_START_PORT
,
620 (__u8
)(TI_UART1_PORT
+ port_number
), 0, NULL
, 0);
622 dev_err(&port
->dev
, "%s - cannot send start command (2), %d\n",
628 dbg("%s - start read urb", __func__
);
629 urb
= port
->read_urb
;
631 dev_err(&port
->dev
, "%s - no read urb\n", __func__
);
635 tport
->tp_read_urb_state
= TI_READ_URB_RUNNING
;
636 urb
->complete
= ti_bulk_in_callback
;
637 urb
->context
= tport
;
639 status
= usb_submit_urb(urb
, GFP_KERNEL
);
641 dev_err(&port
->dev
, "%s - submit read urb failed, %d\n",
646 tport
->tp_is_open
= 1;
647 ++tdev
->td_open_port_count
;
652 if (tdev
->td_open_port_count
== 0)
653 usb_kill_urb(port
->serial
->port
[0]->interrupt_in_urb
);
655 mutex_unlock(&tdev
->td_open_close_lock
);
656 dbg("%s - exit %d", __func__
, status
);
661 static void ti_close(struct tty_struct
*tty
, struct usb_serial_port
*port
,
664 struct ti_device
*tdev
;
665 struct ti_port
*tport
;
670 dbg("%s - port %d", __func__
, port
->number
);
672 tdev
= usb_get_serial_data(port
->serial
);
673 tport
= usb_get_serial_port_data(port
);
674 if (tdev
== NULL
|| tport
== NULL
)
677 tport
->tp_is_open
= 0;
679 ti_drain(tport
, (tport
->tp_closing_wait
*HZ
)/100, 1);
681 usb_kill_urb(port
->read_urb
);
682 usb_kill_urb(port
->write_urb
);
683 tport
->tp_write_urb_in_use
= 0;
685 port_number
= port
->number
- port
->serial
->minor
;
687 dbg("%s - sending TI_CLOSE_PORT", __func__
);
688 status
= ti_command_out_sync(tdev
, TI_CLOSE_PORT
,
689 (__u8
)(TI_UART1_PORT
+ port_number
), 0, NULL
, 0);
692 "%s - cannot send close port command, %d\n"
695 /* if mutex_lock is interrupted, continue anyway */
696 do_unlock
= !mutex_lock_interruptible(&tdev
->td_open_close_lock
);
697 --tport
->tp_tdev
->td_open_port_count
;
698 if (tport
->tp_tdev
->td_open_port_count
<= 0) {
699 /* last port is closed, shut down interrupt urb */
700 usb_kill_urb(port
->serial
->port
[0]->interrupt_in_urb
);
701 tport
->tp_tdev
->td_open_port_count
= 0;
704 mutex_unlock(&tdev
->td_open_close_lock
);
706 dbg("%s - exit", __func__
);
710 static int ti_write(struct tty_struct
*tty
, struct usb_serial_port
*port
,
711 const unsigned char *data
, int count
)
713 struct ti_port
*tport
= usb_get_serial_port_data(port
);
716 dbg("%s - port %d", __func__
, port
->number
);
719 dbg("%s - write request of 0 bytes", __func__
);
723 if (tport
== NULL
|| !tport
->tp_is_open
)
726 spin_lock_irqsave(&tport
->tp_lock
, flags
);
727 count
= ti_buf_put(tport
->tp_write_buf
, data
, count
);
728 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
736 static int ti_write_room(struct tty_struct
*tty
)
738 struct usb_serial_port
*port
= tty
->driver_data
;
739 struct ti_port
*tport
= usb_get_serial_port_data(port
);
743 dbg("%s - port %d", __func__
, port
->number
);
748 spin_lock_irqsave(&tport
->tp_lock
, flags
);
749 room
= ti_buf_space_avail(tport
->tp_write_buf
);
750 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
752 dbg("%s - returns %d", __func__
, room
);
757 static int ti_chars_in_buffer(struct tty_struct
*tty
)
759 struct usb_serial_port
*port
= tty
->driver_data
;
760 struct ti_port
*tport
= usb_get_serial_port_data(port
);
764 dbg("%s - port %d", __func__
, port
->number
);
769 spin_lock_irqsave(&tport
->tp_lock
, flags
);
770 chars
= ti_buf_data_avail(tport
->tp_write_buf
);
771 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
773 dbg("%s - returns %d", __func__
, chars
);
778 static void ti_throttle(struct tty_struct
*tty
)
780 struct usb_serial_port
*port
= tty
->driver_data
;
781 struct ti_port
*tport
= usb_get_serial_port_data(port
);
783 dbg("%s - port %d", __func__
, port
->number
);
788 if (I_IXOFF(tty
) || C_CRTSCTS(tty
))
789 ti_stop_read(tport
, tty
);
794 static void ti_unthrottle(struct tty_struct
*tty
)
796 struct usb_serial_port
*port
= tty
->driver_data
;
797 struct ti_port
*tport
= usb_get_serial_port_data(port
);
800 dbg("%s - port %d", __func__
, port
->number
);
805 if (I_IXOFF(tty
) || C_CRTSCTS(tty
)) {
806 status
= ti_restart_read(tport
, tty
);
808 dev_err(&port
->dev
, "%s - cannot restart read, %d\n",
814 static int ti_ioctl(struct tty_struct
*tty
, struct file
*file
,
815 unsigned int cmd
, unsigned long arg
)
817 struct usb_serial_port
*port
= tty
->driver_data
;
818 struct ti_port
*tport
= usb_get_serial_port_data(port
);
819 struct async_icount cnow
;
820 struct async_icount cprev
;
822 dbg("%s - port %d, cmd = 0x%04X", __func__
, port
->number
, cmd
);
829 dbg("%s - (%d) TIOCGSERIAL", __func__
, port
->number
);
830 return ti_get_serial_info(tport
,
831 (struct serial_struct __user
*)arg
);
833 dbg("%s - (%d) TIOCSSERIAL", __func__
, port
->number
);
834 return ti_set_serial_info(tty
, tport
,
835 (struct serial_struct __user
*)arg
);
837 dbg("%s - (%d) TIOCMIWAIT", __func__
, port
->number
);
838 cprev
= tport
->tp_icount
;
840 interruptible_sleep_on(&tport
->tp_msr_wait
);
841 if (signal_pending(current
))
843 cnow
= tport
->tp_icount
;
844 if (cnow
.rng
== cprev
.rng
&& cnow
.dsr
== cprev
.dsr
&&
845 cnow
.dcd
== cprev
.dcd
&& cnow
.cts
== cprev
.cts
)
846 return -EIO
; /* no change => error */
847 if (((arg
& TIOCM_RNG
) && (cnow
.rng
!= cprev
.rng
)) ||
848 ((arg
& TIOCM_DSR
) && (cnow
.dsr
!= cprev
.dsr
)) ||
849 ((arg
& TIOCM_CD
) && (cnow
.dcd
!= cprev
.dcd
)) ||
850 ((arg
& TIOCM_CTS
) && (cnow
.cts
!= cprev
.cts
)))
856 dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
857 __func__
, port
->number
,
858 tport
->tp_icount
.rx
, tport
->tp_icount
.tx
);
859 if (copy_to_user((void __user
*)arg
, &tport
->tp_icount
,
860 sizeof(tport
->tp_icount
)))
868 static void ti_set_termios(struct tty_struct
*tty
,
869 struct usb_serial_port
*port
, struct ktermios
*old_termios
)
871 struct ti_port
*tport
= usb_get_serial_port_data(port
);
872 struct ti_uart_config
*config
;
873 tcflag_t cflag
, iflag
;
876 int port_number
= port
->number
- port
->serial
->minor
;
879 dbg("%s - port %d", __func__
, port
->number
);
881 cflag
= tty
->termios
->c_cflag
;
882 iflag
= tty
->termios
->c_iflag
;
884 dbg("%s - cflag %08x, iflag %08x", __func__
, cflag
, iflag
);
885 dbg("%s - old clfag %08x, old iflag %08x", __func__
,
886 old_termios
->c_cflag
, old_termios
->c_iflag
);
891 config
= kmalloc(sizeof(*config
), GFP_KERNEL
);
893 dev_err(&port
->dev
, "%s - out of memory\n", __func__
);
899 /* these flags must be set */
900 config
->wFlags
|= TI_UART_ENABLE_MS_INTS
;
901 config
->wFlags
|= TI_UART_ENABLE_AUTO_START_DMA
;
902 config
->bUartMode
= (__u8
)(tport
->tp_uart_mode
);
904 switch (cflag
& CSIZE
) {
906 config
->bDataBits
= TI_UART_5_DATA_BITS
;
909 config
->bDataBits
= TI_UART_6_DATA_BITS
;
912 config
->bDataBits
= TI_UART_7_DATA_BITS
;
916 config
->bDataBits
= TI_UART_8_DATA_BITS
;
920 /* CMSPAR isn't supported by this driver */
921 tty
->termios
->c_cflag
&= ~CMSPAR
;
923 if (cflag
& PARENB
) {
924 if (cflag
& PARODD
) {
925 config
->wFlags
|= TI_UART_ENABLE_PARITY_CHECKING
;
926 config
->bParity
= TI_UART_ODD_PARITY
;
928 config
->wFlags
|= TI_UART_ENABLE_PARITY_CHECKING
;
929 config
->bParity
= TI_UART_EVEN_PARITY
;
932 config
->wFlags
&= ~TI_UART_ENABLE_PARITY_CHECKING
;
933 config
->bParity
= TI_UART_NO_PARITY
;
937 config
->bStopBits
= TI_UART_2_STOP_BITS
;
939 config
->bStopBits
= TI_UART_1_STOP_BITS
;
941 if (cflag
& CRTSCTS
) {
942 /* RTS flow control must be off to drop RTS for baud rate B0 */
943 if ((cflag
& CBAUD
) != B0
)
944 config
->wFlags
|= TI_UART_ENABLE_RTS_IN
;
945 config
->wFlags
|= TI_UART_ENABLE_CTS_OUT
;
948 ti_restart_read(tport
, tty
);
951 if (I_IXOFF(tty
) || I_IXON(tty
)) {
952 config
->cXon
= START_CHAR(tty
);
953 config
->cXoff
= STOP_CHAR(tty
);
956 config
->wFlags
|= TI_UART_ENABLE_X_IN
;
958 ti_restart_read(tport
, tty
);
961 config
->wFlags
|= TI_UART_ENABLE_X_OUT
;
964 baud
= tty_get_baud_rate(tty
);
967 if (tport
->tp_tdev
->td_is_3410
)
968 config
->wBaudRate
= (__u16
)((923077 + baud
/2) / baud
);
970 config
->wBaudRate
= (__u16
)((461538 + baud
/2) / baud
);
972 /* FIXME: Should calculate resulting baud here and report it back */
973 if ((cflag
& CBAUD
) != B0
)
974 tty_encode_baud_rate(tty
, baud
, baud
);
976 dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
977 __func__
, baud
, config
->wBaudRate
, config
->wFlags
, config
->bDataBits
, config
->bParity
, config
->bStopBits
, config
->cXon
, config
->cXoff
, config
->bUartMode
);
979 cpu_to_be16s(&config
->wBaudRate
);
980 cpu_to_be16s(&config
->wFlags
);
982 status
= ti_command_out_sync(tport
->tp_tdev
, TI_SET_CONFIG
,
983 (__u8
)(TI_UART1_PORT
+ port_number
), 0, (__u8
*)config
,
986 dev_err(&port
->dev
, "%s - cannot set config on port %d, %d\n",
987 __func__
, port_number
, status
);
989 /* SET_CONFIG asserts RTS and DTR, reset them correctly */
990 mcr
= tport
->tp_shadow_mcr
;
991 /* if baud rate is B0, clear RTS and DTR */
992 if ((cflag
& CBAUD
) == B0
)
993 mcr
&= ~(TI_MCR_DTR
| TI_MCR_RTS
);
994 status
= ti_set_mcr(tport
, mcr
);
997 "%s - cannot set modem control on port %d, %d\n",
998 __func__
, port_number
, status
);
1004 static int ti_tiocmget(struct tty_struct
*tty
, struct file
*file
)
1006 struct usb_serial_port
*port
= tty
->driver_data
;
1007 struct ti_port
*tport
= usb_get_serial_port_data(port
);
1008 unsigned int result
;
1011 unsigned long flags
;
1013 dbg("%s - port %d", __func__
, port
->number
);
1018 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1019 msr
= tport
->tp_msr
;
1020 mcr
= tport
->tp_shadow_mcr
;
1021 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1023 result
= ((mcr
& TI_MCR_DTR
) ? TIOCM_DTR
: 0)
1024 | ((mcr
& TI_MCR_RTS
) ? TIOCM_RTS
: 0)
1025 | ((mcr
& TI_MCR_LOOP
) ? TIOCM_LOOP
: 0)
1026 | ((msr
& TI_MSR_CTS
) ? TIOCM_CTS
: 0)
1027 | ((msr
& TI_MSR_CD
) ? TIOCM_CAR
: 0)
1028 | ((msr
& TI_MSR_RI
) ? TIOCM_RI
: 0)
1029 | ((msr
& TI_MSR_DSR
) ? TIOCM_DSR
: 0);
1031 dbg("%s - 0x%04X", __func__
, result
);
1037 static int ti_tiocmset(struct tty_struct
*tty
, struct file
*file
,
1038 unsigned int set
, unsigned int clear
)
1040 struct usb_serial_port
*port
= tty
->driver_data
;
1041 struct ti_port
*tport
= usb_get_serial_port_data(port
);
1043 unsigned long flags
;
1045 dbg("%s - port %d", __func__
, port
->number
);
1050 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1051 mcr
= tport
->tp_shadow_mcr
;
1053 if (set
& TIOCM_RTS
)
1055 if (set
& TIOCM_DTR
)
1057 if (set
& TIOCM_LOOP
)
1060 if (clear
& TIOCM_RTS
)
1062 if (clear
& TIOCM_DTR
)
1064 if (clear
& TIOCM_LOOP
)
1065 mcr
&= ~TI_MCR_LOOP
;
1066 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1068 return ti_set_mcr(tport
, mcr
);
1072 static void ti_break(struct tty_struct
*tty
, int break_state
)
1074 struct usb_serial_port
*port
= tty
->driver_data
;
1075 struct ti_port
*tport
= usb_get_serial_port_data(port
);
1078 dbg("%s - state = %d", __func__
, break_state
);
1083 ti_drain(tport
, (tport
->tp_closing_wait
*HZ
)/100, 0);
1085 status
= ti_write_byte(tport
->tp_tdev
,
1086 tport
->tp_uart_base_addr
+ TI_UART_OFFSET_LCR
,
1087 TI_LCR_BREAK
, break_state
== -1 ? TI_LCR_BREAK
: 0);
1090 dbg("%s - error setting break, %d", __func__
, status
);
1094 static void ti_interrupt_callback(struct urb
*urb
)
1096 struct ti_device
*tdev
= urb
->context
;
1097 struct usb_serial_port
*port
;
1098 struct usb_serial
*serial
= tdev
->td_serial
;
1099 struct ti_port
*tport
;
1100 struct device
*dev
= &urb
->dev
->dev
;
1101 unsigned char *data
= urb
->transfer_buffer
;
1102 int length
= urb
->actual_length
;
1105 int status
= urb
->status
;
1109 dbg("%s", __func__
);
1117 dbg("%s - urb shutting down, %d", __func__
, status
);
1118 tdev
->td_urb_error
= 1;
1121 dev_err(dev
, "%s - nonzero urb status, %d\n",
1123 tdev
->td_urb_error
= 1;
1128 dbg("%s - bad packet size, %d", __func__
, length
);
1132 if (data
[0] == TI_CODE_HARDWARE_ERROR
) {
1133 dev_err(dev
, "%s - hardware error, %d\n", __func__
, data
[1]);
1137 port_number
= TI_GET_PORT_FROM_CODE(data
[0]);
1138 function
= TI_GET_FUNC_FROM_CODE(data
[0]);
1140 dbg("%s - port_number %d, function %d, data 0x%02X",
1141 __func__
, port_number
, function
, data
[1]);
1143 if (port_number
>= serial
->num_ports
) {
1144 dev_err(dev
, "%s - bad port number, %d\n",
1145 __func__
, port_number
);
1149 port
= serial
->port
[port_number
];
1151 tport
= usb_get_serial_port_data(port
);
1156 case TI_CODE_DATA_ERROR
:
1157 dev_err(dev
, "%s - DATA ERROR, port %d, data 0x%02X\n",
1158 __func__
, port_number
, data
[1]);
1161 case TI_CODE_MODEM_STATUS
:
1163 dbg("%s - port %d, msr 0x%02X", __func__
, port_number
, msr
);
1164 ti_handle_new_msr(tport
, msr
);
1168 dev_err(dev
, "%s - unknown interrupt code, 0x%02X\n",
1174 retval
= usb_submit_urb(urb
, GFP_ATOMIC
);
1176 dev_err(dev
, "%s - resubmit interrupt urb failed, %d\n",
1181 static void ti_bulk_in_callback(struct urb
*urb
)
1183 struct ti_port
*tport
= urb
->context
;
1184 struct usb_serial_port
*port
= tport
->tp_port
;
1185 struct device
*dev
= &urb
->dev
->dev
;
1186 int status
= urb
->status
;
1188 struct tty_struct
*tty
;
1190 dbg("%s", __func__
);
1198 dbg("%s - urb shutting down, %d", __func__
, status
);
1199 tport
->tp_tdev
->td_urb_error
= 1;
1200 wake_up_interruptible(&tport
->tp_write_wait
);
1203 dev_err(dev
, "%s - nonzero urb status, %d\n",
1205 tport
->tp_tdev
->td_urb_error
= 1;
1206 wake_up_interruptible(&tport
->tp_write_wait
);
1209 if (status
== -EPIPE
)
1213 dev_err(dev
, "%s - stopping read!\n", __func__
);
1217 tty
= tty_port_tty_get(&port
->port
);
1219 if (urb
->actual_length
) {
1220 usb_serial_debug_data(debug
, dev
, __func__
,
1221 urb
->actual_length
, urb
->transfer_buffer
);
1223 if (!tport
->tp_is_open
)
1224 dbg("%s - port closed, dropping data",
1227 ti_recv(&urb
->dev
->dev
, tty
,
1228 urb
->transfer_buffer
,
1229 urb
->actual_length
);
1230 spin_lock(&tport
->tp_lock
);
1231 tport
->tp_icount
.rx
+= urb
->actual_length
;
1232 spin_unlock(&tport
->tp_lock
);
1238 /* continue to read unless stopping */
1239 spin_lock(&tport
->tp_lock
);
1240 if (tport
->tp_read_urb_state
== TI_READ_URB_RUNNING
) {
1241 urb
->dev
= port
->serial
->dev
;
1242 retval
= usb_submit_urb(urb
, GFP_ATOMIC
);
1243 } else if (tport
->tp_read_urb_state
== TI_READ_URB_STOPPING
) {
1244 tport
->tp_read_urb_state
= TI_READ_URB_STOPPED
;
1246 spin_unlock(&tport
->tp_lock
);
1248 dev_err(dev
, "%s - resubmit read urb failed, %d\n",
1253 static void ti_bulk_out_callback(struct urb
*urb
)
1255 struct ti_port
*tport
= urb
->context
;
1256 struct usb_serial_port
*port
= tport
->tp_port
;
1257 struct device
*dev
= &urb
->dev
->dev
;
1258 int status
= urb
->status
;
1260 dbg("%s - port %d", __func__
, port
->number
);
1262 tport
->tp_write_urb_in_use
= 0;
1270 dbg("%s - urb shutting down, %d", __func__
, status
);
1271 tport
->tp_tdev
->td_urb_error
= 1;
1272 wake_up_interruptible(&tport
->tp_write_wait
);
1275 dev_err(dev
, "%s - nonzero urb status, %d\n",
1277 tport
->tp_tdev
->td_urb_error
= 1;
1278 wake_up_interruptible(&tport
->tp_write_wait
);
1281 /* send any buffered data */
1286 static void ti_recv(struct device
*dev
, struct tty_struct
*tty
,
1287 unsigned char *data
, int length
)
1292 cnt
= tty_buffer_request_room(tty
, length
);
1294 dev_err(dev
, "%s - dropping data, %d bytes lost\n",
1295 __func__
, length
- cnt
);
1299 tty_insert_flip_string(tty
, data
, cnt
);
1300 tty_flip_buffer_push(tty
);
1303 } while (length
> 0);
1308 static void ti_send(struct ti_port
*tport
)
1311 struct usb_serial_port
*port
= tport
->tp_port
;
1312 struct tty_struct
*tty
= tty_port_tty_get(&port
->port
); /* FIXME */
1313 unsigned long flags
;
1316 dbg("%s - port %d", __func__
, port
->number
);
1318 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1320 if (tport
->tp_write_urb_in_use
)
1323 count
= ti_buf_get(tport
->tp_write_buf
,
1324 port
->write_urb
->transfer_buffer
,
1325 port
->bulk_out_size
);
1330 tport
->tp_write_urb_in_use
= 1;
1332 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1334 usb_serial_debug_data(debug
, &port
->dev
, __func__
, count
,
1335 port
->write_urb
->transfer_buffer
);
1337 usb_fill_bulk_urb(port
->write_urb
, port
->serial
->dev
,
1338 usb_sndbulkpipe(port
->serial
->dev
,
1339 port
->bulk_out_endpointAddress
),
1340 port
->write_urb
->transfer_buffer
, count
,
1341 ti_bulk_out_callback
, tport
);
1343 result
= usb_submit_urb(port
->write_urb
, GFP_ATOMIC
);
1345 dev_err(&port
->dev
, "%s - submit write urb failed, %d\n",
1347 tport
->tp_write_urb_in_use
= 0;
1348 /* TODO: reschedule ti_send */
1350 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1351 tport
->tp_icount
.tx
+= count
;
1352 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1355 /* more room in the buffer for new writes, wakeup */
1359 wake_up_interruptible(&tport
->tp_write_wait
);
1362 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1368 static int ti_set_mcr(struct ti_port
*tport
, unsigned int mcr
)
1370 unsigned long flags
;
1373 status
= ti_write_byte(tport
->tp_tdev
,
1374 tport
->tp_uart_base_addr
+ TI_UART_OFFSET_MCR
,
1375 TI_MCR_RTS
| TI_MCR_DTR
| TI_MCR_LOOP
, mcr
);
1377 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1379 tport
->tp_shadow_mcr
= mcr
;
1380 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1386 static int ti_get_lsr(struct ti_port
*tport
)
1389 struct ti_device
*tdev
= tport
->tp_tdev
;
1390 struct usb_serial_port
*port
= tport
->tp_port
;
1391 int port_number
= port
->number
- port
->serial
->minor
;
1392 struct ti_port_status
*data
;
1394 dbg("%s - port %d", __func__
, port
->number
);
1396 size
= sizeof(struct ti_port_status
);
1397 data
= kmalloc(size
, GFP_KERNEL
);
1399 dev_err(&port
->dev
, "%s - out of memory\n", __func__
);
1403 status
= ti_command_in_sync(tdev
, TI_GET_PORT_STATUS
,
1404 (__u8
)(TI_UART1_PORT
+port_number
), 0, (__u8
*)data
, size
);
1407 "%s - get port status command failed, %d\n",
1412 dbg("%s - lsr 0x%02X", __func__
, data
->bLSR
);
1414 tport
->tp_lsr
= data
->bLSR
;
1422 static int ti_get_serial_info(struct ti_port
*tport
,
1423 struct serial_struct __user
*ret_arg
)
1425 struct usb_serial_port
*port
= tport
->tp_port
;
1426 struct serial_struct ret_serial
;
1431 memset(&ret_serial
, 0, sizeof(ret_serial
));
1433 ret_serial
.type
= PORT_16550A
;
1434 ret_serial
.line
= port
->serial
->minor
;
1435 ret_serial
.port
= port
->number
- port
->serial
->minor
;
1436 ret_serial
.flags
= tport
->tp_flags
;
1437 ret_serial
.xmit_fifo_size
= TI_WRITE_BUF_SIZE
;
1438 ret_serial
.baud_base
= tport
->tp_tdev
->td_is_3410
? 921600 : 460800;
1439 ret_serial
.closing_wait
= tport
->tp_closing_wait
;
1441 if (copy_to_user(ret_arg
, &ret_serial
, sizeof(*ret_arg
)))
1448 static int ti_set_serial_info(struct tty_struct
*tty
, struct ti_port
*tport
,
1449 struct serial_struct __user
*new_arg
)
1451 struct serial_struct new_serial
;
1453 if (copy_from_user(&new_serial
, new_arg
, sizeof(new_serial
)))
1456 tport
->tp_flags
= new_serial
.flags
& TI_SET_SERIAL_FLAGS
;
1457 tty
->low_latency
= (tport
->tp_flags
& ASYNC_LOW_LATENCY
) ? 1 : 0;
1458 tport
->tp_closing_wait
= new_serial
.closing_wait
;
1464 static void ti_handle_new_msr(struct ti_port
*tport
, __u8 msr
)
1466 struct async_icount
*icount
;
1467 struct tty_struct
*tty
;
1468 unsigned long flags
;
1470 dbg("%s - msr 0x%02X", __func__
, msr
);
1472 if (msr
& TI_MSR_DELTA_MASK
) {
1473 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1474 icount
= &tport
->tp_icount
;
1475 if (msr
& TI_MSR_DELTA_CTS
)
1477 if (msr
& TI_MSR_DELTA_DSR
)
1479 if (msr
& TI_MSR_DELTA_CD
)
1481 if (msr
& TI_MSR_DELTA_RI
)
1483 wake_up_interruptible(&tport
->tp_msr_wait
);
1484 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1487 tport
->tp_msr
= msr
& TI_MSR_MASK
;
1489 /* handle CTS flow control */
1490 tty
= tty_port_tty_get(&tport
->tp_port
->port
);
1491 if (tty
&& C_CRTSCTS(tty
)) {
1492 if (msr
& TI_MSR_CTS
) {
1493 tty
->hw_stopped
= 0;
1496 tty
->hw_stopped
= 1;
1503 static void ti_drain(struct ti_port
*tport
, unsigned long timeout
, int flush
)
1505 struct ti_device
*tdev
= tport
->tp_tdev
;
1506 struct usb_serial_port
*port
= tport
->tp_port
;
1509 dbg("%s - port %d", __func__
, port
->number
);
1511 spin_lock_irq(&tport
->tp_lock
);
1513 /* wait for data to drain from the buffer */
1514 tdev
->td_urb_error
= 0;
1515 init_waitqueue_entry(&wait
, current
);
1516 add_wait_queue(&tport
->tp_write_wait
, &wait
);
1518 set_current_state(TASK_INTERRUPTIBLE
);
1519 if (ti_buf_data_avail(tport
->tp_write_buf
) == 0
1520 || timeout
== 0 || signal_pending(current
)
1521 || tdev
->td_urb_error
1522 || port
->serial
->disconnected
) /* disconnect */
1524 spin_unlock_irq(&tport
->tp_lock
);
1525 timeout
= schedule_timeout(timeout
);
1526 spin_lock_irq(&tport
->tp_lock
);
1528 set_current_state(TASK_RUNNING
);
1529 remove_wait_queue(&tport
->tp_write_wait
, &wait
);
1531 /* flush any remaining data in the buffer */
1533 ti_buf_clear(tport
->tp_write_buf
);
1535 spin_unlock_irq(&tport
->tp_lock
);
1537 mutex_lock(&port
->serial
->disc_mutex
);
1538 /* wait for data to drain from the device */
1539 /* wait for empty tx register, plus 20 ms */
1541 tport
->tp_lsr
&= ~TI_LSR_TX_EMPTY
;
1542 while ((long)(jiffies
- timeout
) < 0 && !signal_pending(current
)
1543 && !(tport
->tp_lsr
&TI_LSR_TX_EMPTY
) && !tdev
->td_urb_error
1544 && !port
->serial
->disconnected
) {
1545 if (ti_get_lsr(tport
))
1547 mutex_unlock(&port
->serial
->disc_mutex
);
1548 msleep_interruptible(20);
1549 mutex_lock(&port
->serial
->disc_mutex
);
1551 mutex_unlock(&port
->serial
->disc_mutex
);
1555 static void ti_stop_read(struct ti_port
*tport
, struct tty_struct
*tty
)
1557 unsigned long flags
;
1559 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1561 if (tport
->tp_read_urb_state
== TI_READ_URB_RUNNING
)
1562 tport
->tp_read_urb_state
= TI_READ_URB_STOPPING
;
1564 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1568 static int ti_restart_read(struct ti_port
*tport
, struct tty_struct
*tty
)
1572 unsigned long flags
;
1574 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1576 if (tport
->tp_read_urb_state
== TI_READ_URB_STOPPED
) {
1577 tport
->tp_read_urb_state
= TI_READ_URB_RUNNING
;
1578 urb
= tport
->tp_port
->read_urb
;
1579 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1580 urb
->complete
= ti_bulk_in_callback
;
1581 urb
->context
= tport
;
1582 urb
->dev
= tport
->tp_port
->serial
->dev
;
1583 status
= usb_submit_urb(urb
, GFP_KERNEL
);
1585 tport
->tp_read_urb_state
= TI_READ_URB_RUNNING
;
1586 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1593 static int ti_command_out_sync(struct ti_device
*tdev
, __u8 command
,
1594 __u16 moduleid
, __u16 value
, __u8
*data
, int size
)
1598 status
= usb_control_msg(tdev
->td_serial
->dev
,
1599 usb_sndctrlpipe(tdev
->td_serial
->dev
, 0), command
,
1600 (USB_TYPE_VENDOR
| USB_RECIP_DEVICE
| USB_DIR_OUT
),
1601 value
, moduleid
, data
, size
, 1000);
1613 static int ti_command_in_sync(struct ti_device
*tdev
, __u8 command
,
1614 __u16 moduleid
, __u16 value
, __u8
*data
, int size
)
1618 status
= usb_control_msg(tdev
->td_serial
->dev
,
1619 usb_rcvctrlpipe(tdev
->td_serial
->dev
, 0), command
,
1620 (USB_TYPE_VENDOR
| USB_RECIP_DEVICE
| USB_DIR_IN
),
1621 value
, moduleid
, data
, size
, 1000);
1633 static int ti_write_byte(struct ti_device
*tdev
, unsigned long addr
,
1634 __u8 mask
, __u8 byte
)
1638 struct ti_write_data_bytes
*data
;
1639 struct device
*dev
= &tdev
->td_serial
->dev
->dev
;
1641 dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X",
1642 __func__
, addr
, mask
, byte
);
1644 size
= sizeof(struct ti_write_data_bytes
) + 2;
1645 data
= kmalloc(size
, GFP_KERNEL
);
1647 dev_err(dev
, "%s - out of memory\n", __func__
);
1651 data
->bAddrType
= TI_RW_DATA_ADDR_XDATA
;
1652 data
->bDataType
= TI_RW_DATA_BYTE
;
1653 data
->bDataCounter
= 1;
1654 data
->wBaseAddrHi
= cpu_to_be16(addr
>>16);
1655 data
->wBaseAddrLo
= cpu_to_be16(addr
);
1656 data
->bData
[0] = mask
;
1657 data
->bData
[1] = byte
;
1659 status
= ti_command_out_sync(tdev
, TI_WRITE_DATA
, TI_RAM_PORT
, 0,
1660 (__u8
*)data
, size
);
1663 dev_err(dev
, "%s - failed, %d\n", __func__
, status
);
1670 static int ti_do_download(struct usb_device
*dev
, int pipe
,
1671 u8
*buffer
, int size
)
1676 struct ti_firmware_header
*header
;
1680 for (pos
= sizeof(struct ti_firmware_header
); pos
< size
; pos
++)
1681 cs
= (__u8
)(cs
+ buffer
[pos
]);
1683 header
= (struct ti_firmware_header
*)buffer
;
1684 header
->wLength
= cpu_to_le16((__u16
)(size
1685 - sizeof(struct ti_firmware_header
)));
1686 header
->bCheckSum
= cs
;
1688 dbg("%s - downloading firmware", __func__
);
1689 for (pos
= 0; pos
< size
; pos
+= done
) {
1690 len
= min(size
- pos
, TI_DOWNLOAD_MAX_PACKET_SIZE
);
1691 status
= usb_bulk_msg(dev
, pipe
, buffer
+ pos
, len
,
1699 static int ti_download_firmware(struct ti_device
*tdev
)
1704 struct usb_device
*dev
= tdev
->td_serial
->dev
;
1705 unsigned int pipe
= usb_sndbulkpipe(dev
,
1706 tdev
->td_serial
->port
[0]->bulk_out_endpointAddress
);
1707 const struct firmware
*fw_p
;
1710 /* try ID specific firmware first, then try generic firmware */
1711 sprintf(buf
, "ti_usb-v%04x-p%04x.fw", dev
->descriptor
.idVendor
,
1712 dev
->descriptor
.idProduct
);
1713 if ((status
= request_firmware(&fw_p
, buf
, &dev
->dev
)) != 0) {
1715 if (dev
->descriptor
.idVendor
== MTS_VENDOR_ID
) {
1716 switch (dev
->descriptor
.idProduct
) {
1717 case MTS_CDMA_PRODUCT_ID
:
1718 strcpy(buf
, "mts_cdma.fw");
1720 case MTS_GSM_PRODUCT_ID
:
1721 strcpy(buf
, "mts_gsm.fw");
1723 case MTS_EDGE_PRODUCT_ID
:
1724 strcpy(buf
, "mts_edge.fw");
1728 if (buf
[0] == '\0') {
1729 if (tdev
->td_is_3410
)
1730 strcpy(buf
, "ti_3410.fw");
1732 strcpy(buf
, "ti_5052.fw");
1734 status
= request_firmware(&fw_p
, buf
, &dev
->dev
);
1737 dev_err(&dev
->dev
, "%s - firmware not found\n", __func__
);
1740 if (fw_p
->size
> TI_FIRMWARE_BUF_SIZE
) {
1741 dev_err(&dev
->dev
, "%s - firmware too large\n", __func__
);
1745 buffer_size
= TI_FIRMWARE_BUF_SIZE
+ sizeof(struct ti_firmware_header
);
1746 buffer
= kmalloc(buffer_size
, GFP_KERNEL
);
1748 memcpy(buffer
, fw_p
->data
, fw_p
->size
);
1749 memset(buffer
+ fw_p
->size
, 0xff, buffer_size
- fw_p
->size
);
1750 status
= ti_do_download(dev
, pipe
, buffer
, fw_p
->size
);
1755 release_firmware(fw_p
);
1757 dev_err(&dev
->dev
, "%s - error downloading firmware, %d\n",
1762 dbg("%s - download successful", __func__
);
1768 /* Circular Buffer Functions */
1773 * Allocate a circular buffer and all associated memory.
1776 static struct circ_buf
*ti_buf_alloc(void)
1778 struct circ_buf
*cb
;
1780 cb
= kmalloc(sizeof(struct circ_buf
), GFP_KERNEL
);
1784 cb
->buf
= kmalloc(TI_WRITE_BUF_SIZE
, GFP_KERNEL
);
1785 if (cb
->buf
== NULL
) {
1799 * Free the buffer and all associated memory.
1802 static void ti_buf_free(struct circ_buf
*cb
)
1812 * Clear out all data in the circular buffer.
1815 static void ti_buf_clear(struct circ_buf
*cb
)
1817 cb
->head
= cb
->tail
= 0;
1824 * Return the number of bytes of data available in the circular
1828 static int ti_buf_data_avail(struct circ_buf
*cb
)
1830 return CIRC_CNT(cb
->head
, cb
->tail
, TI_WRITE_BUF_SIZE
);
1835 * ti_buf_space_avail
1837 * Return the number of bytes of space available in the circular
1841 static int ti_buf_space_avail(struct circ_buf
*cb
)
1843 return CIRC_SPACE(cb
->head
, cb
->tail
, TI_WRITE_BUF_SIZE
);
1850 * Copy data data from a user buffer and put it into the circular buffer.
1851 * Restrict to the amount of space available.
1853 * Return the number of bytes copied.
1856 static int ti_buf_put(struct circ_buf
*cb
, const char *buf
, int count
)
1861 c
= CIRC_SPACE_TO_END(cb
->head
, cb
->tail
, TI_WRITE_BUF_SIZE
);
1866 memcpy(cb
->buf
+ cb
->head
, buf
, c
);
1867 cb
->head
= (cb
->head
+ c
) & (TI_WRITE_BUF_SIZE
-1);
1880 * Get data from the circular buffer and copy to the given buffer.
1881 * Restrict to the amount of data available.
1883 * Return the number of bytes copied.
1886 static int ti_buf_get(struct circ_buf
*cb
, char *buf
, int count
)
1891 c
= CIRC_CNT_TO_END(cb
->head
, cb
->tail
, TI_WRITE_BUF_SIZE
);
1896 memcpy(buf
, cb
->buf
+ cb
->tail
, c
);
1897 cb
->tail
= (cb
->tail
+ c
) & (TI_WRITE_BUF_SIZE
-1);