ptrace: kill __ptrace_detach(), fix ->exit_state check
[linux-2.6/mini2440.git] / drivers / char / dtlk.c
blob6b900b297cc615f7687b8a320fd7ebc4987338a7
1 /* -*- linux-c -*-
2 * dtlk.c - DoubleTalk PC driver for Linux
4 * Original author: Chris Pallotta <chris@allmedia.com>
5 * Current maintainer: Jim Van Zandt <jrv@vanzandt.mv.com>
6 *
7 * 2000-03-18 Jim Van Zandt: Fix polling.
8 * Eliminate dtlk_timer_active flag and separate dtlk_stop_timer
9 * function. Don't restart timer in dtlk_timer_tick. Restart timer
10 * in dtlk_poll after every poll. dtlk_poll returns mask (duh).
11 * Eliminate unused function dtlk_write_byte. Misc. code cleanups.
14 /* This driver is for the DoubleTalk PC, a speech synthesizer
15 manufactured by RC Systems (http://www.rcsys.com/). It was written
16 based on documentation in their User's Manual file and Developer's
17 Tools disk.
19 The DoubleTalk PC contains four voice synthesizers: text-to-speech
20 (TTS), linear predictive coding (LPC), PCM/ADPCM, and CVSD. It
21 also has a tone generator. Output data for LPC are written to the
22 LPC port, and output data for the other modes are written to the
23 TTS port.
25 Two kinds of data can be read from the DoubleTalk: status
26 information (in response to the "\001?" interrogation command) is
27 read from the TTS port, and index markers (which mark the progress
28 of the speech) are read from the LPC port. Not all models of the
29 DoubleTalk PC implement index markers. Both the TTS and LPC ports
30 can also display status flags.
32 The DoubleTalk PC generates no interrupts.
34 These characteristics are mapped into the Unix stream I/O model as
35 follows:
37 "write" sends bytes to the TTS port. It is the responsibility of
38 the user program to switch modes among TTS, PCM/ADPCM, and CVSD.
39 This driver was written for use with the text-to-speech
40 synthesizer. If LPC output is needed some day, other minor device
41 numbers can be used to select among output modes.
43 "read" gets index markers from the LPC port. If the device does
44 not implement index markers, the read will fail with error EINVAL.
46 Status information is available using the DTLK_INTERROGATE ioctl.
50 #include <linux/module.h>
52 #define KERNEL
53 #include <linux/types.h>
54 #include <linux/fs.h>
55 #include <linux/mm.h>
56 #include <linux/errno.h> /* for -EBUSY */
57 #include <linux/ioport.h> /* for request_region */
58 #include <linux/delay.h> /* for loops_per_jiffy */
59 #include <linux/smp_lock.h> /* cycle_kernel_lock() */
60 #include <asm/io.h> /* for inb_p, outb_p, inb, outb, etc. */
61 #include <asm/uaccess.h> /* for get_user, etc. */
62 #include <linux/wait.h> /* for wait_queue */
63 #include <linux/init.h> /* for __init, module_{init,exit} */
64 #include <linux/poll.h> /* for POLLIN, etc. */
65 #include <linux/dtlk.h> /* local header file for DoubleTalk values */
67 #ifdef TRACING
68 #define TRACE_TEXT(str) printk(str);
69 #define TRACE_RET printk(")")
70 #else /* !TRACING */
71 #define TRACE_TEXT(str) ((void) 0)
72 #define TRACE_RET ((void) 0)
73 #endif /* TRACING */
75 static void dtlk_timer_tick(unsigned long data);
77 static int dtlk_major;
78 static int dtlk_port_lpc;
79 static int dtlk_port_tts;
80 static int dtlk_busy;
81 static int dtlk_has_indexing;
82 static unsigned int dtlk_portlist[] =
83 {0x25e, 0x29e, 0x2de, 0x31e, 0x35e, 0x39e, 0};
84 static wait_queue_head_t dtlk_process_list;
85 static DEFINE_TIMER(dtlk_timer, dtlk_timer_tick, 0, 0);
87 /* prototypes for file_operations struct */
88 static ssize_t dtlk_read(struct file *, char __user *,
89 size_t nbytes, loff_t * ppos);
90 static ssize_t dtlk_write(struct file *, const char __user *,
91 size_t nbytes, loff_t * ppos);
92 static unsigned int dtlk_poll(struct file *, poll_table *);
93 static int dtlk_open(struct inode *, struct file *);
94 static int dtlk_release(struct inode *, struct file *);
95 static int dtlk_ioctl(struct inode *inode, struct file *file,
96 unsigned int cmd, unsigned long arg);
98 static const struct file_operations dtlk_fops =
100 .owner = THIS_MODULE,
101 .read = dtlk_read,
102 .write = dtlk_write,
103 .poll = dtlk_poll,
104 .ioctl = dtlk_ioctl,
105 .open = dtlk_open,
106 .release = dtlk_release,
109 /* local prototypes */
110 static int dtlk_dev_probe(void);
111 static struct dtlk_settings *dtlk_interrogate(void);
112 static int dtlk_readable(void);
113 static char dtlk_read_lpc(void);
114 static char dtlk_read_tts(void);
115 static int dtlk_writeable(void);
116 static char dtlk_write_bytes(const char *buf, int n);
117 static char dtlk_write_tts(char);
119 static void dtlk_handle_error(char, char, unsigned int);
122 static ssize_t dtlk_read(struct file *file, char __user *buf,
123 size_t count, loff_t * ppos)
125 unsigned int minor = iminor(file->f_path.dentry->d_inode);
126 char ch;
127 int i = 0, retries;
129 TRACE_TEXT("(dtlk_read");
130 /* printk("DoubleTalk PC - dtlk_read()\n"); */
132 if (minor != DTLK_MINOR || !dtlk_has_indexing)
133 return -EINVAL;
135 for (retries = 0; retries < loops_per_jiffy; retries++) {
136 while (i < count && dtlk_readable()) {
137 ch = dtlk_read_lpc();
138 /* printk("dtlk_read() reads 0x%02x\n", ch); */
139 if (put_user(ch, buf++))
140 return -EFAULT;
141 i++;
143 if (i)
144 return i;
145 if (file->f_flags & O_NONBLOCK)
146 break;
147 msleep_interruptible(100);
149 if (retries == loops_per_jiffy)
150 printk(KERN_ERR "dtlk_read times out\n");
151 TRACE_RET;
152 return -EAGAIN;
155 static ssize_t dtlk_write(struct file *file, const char __user *buf,
156 size_t count, loff_t * ppos)
158 int i = 0, retries = 0, ch;
160 TRACE_TEXT("(dtlk_write");
161 #ifdef TRACING
162 printk(" \"");
164 int i, ch;
165 for (i = 0; i < count; i++) {
166 if (get_user(ch, buf + i))
167 return -EFAULT;
168 if (' ' <= ch && ch <= '~')
169 printk("%c", ch);
170 else
171 printk("\\%03o", ch);
173 printk("\"");
175 #endif
177 if (iminor(file->f_path.dentry->d_inode) != DTLK_MINOR)
178 return -EINVAL;
180 while (1) {
181 while (i < count && !get_user(ch, buf) &&
182 (ch == DTLK_CLEAR || dtlk_writeable())) {
183 dtlk_write_tts(ch);
184 buf++;
185 i++;
186 if (i % 5 == 0)
187 /* We yield our time until scheduled
188 again. This reduces the transfer
189 rate to 500 bytes/sec, but that's
190 still enough to keep up with the
191 speech synthesizer. */
192 msleep_interruptible(1);
193 else {
194 /* the RDY bit goes zero 2-3 usec
195 after writing, and goes 1 again
196 180-190 usec later. Here, we wait
197 up to 250 usec for the RDY bit to
198 go nonzero. */
199 for (retries = 0;
200 retries < loops_per_jiffy / (4000/HZ);
201 retries++)
202 if (inb_p(dtlk_port_tts) &
203 TTS_WRITABLE)
204 break;
206 retries = 0;
208 if (i == count)
209 return i;
210 if (file->f_flags & O_NONBLOCK)
211 break;
213 msleep_interruptible(1);
215 if (++retries > 10 * HZ) { /* wait no more than 10 sec
216 from last write */
217 printk("dtlk: write timeout. "
218 "inb_p(dtlk_port_tts) = 0x%02x\n",
219 inb_p(dtlk_port_tts));
220 TRACE_RET;
221 return -EBUSY;
224 TRACE_RET;
225 return -EAGAIN;
228 static unsigned int dtlk_poll(struct file *file, poll_table * wait)
230 int mask = 0;
231 unsigned long expires;
233 TRACE_TEXT(" dtlk_poll");
235 static long int j;
236 printk(".");
237 printk("<%ld>", jiffies-j);
238 j=jiffies;
240 poll_wait(file, &dtlk_process_list, wait);
242 if (dtlk_has_indexing && dtlk_readable()) {
243 del_timer(&dtlk_timer);
244 mask = POLLIN | POLLRDNORM;
246 if (dtlk_writeable()) {
247 del_timer(&dtlk_timer);
248 mask |= POLLOUT | POLLWRNORM;
250 /* there are no exception conditions */
252 /* There won't be any interrupts, so we set a timer instead. */
253 expires = jiffies + 3*HZ / 100;
254 mod_timer(&dtlk_timer, expires);
256 return mask;
259 static void dtlk_timer_tick(unsigned long data)
261 TRACE_TEXT(" dtlk_timer_tick");
262 wake_up_interruptible(&dtlk_process_list);
265 static int dtlk_ioctl(struct inode *inode,
266 struct file *file,
267 unsigned int cmd,
268 unsigned long arg)
270 char __user *argp = (char __user *)arg;
271 struct dtlk_settings *sp;
272 char portval;
273 TRACE_TEXT(" dtlk_ioctl");
275 switch (cmd) {
277 case DTLK_INTERROGATE:
278 sp = dtlk_interrogate();
279 if (copy_to_user(argp, sp, sizeof(struct dtlk_settings)))
280 return -EINVAL;
281 return 0;
283 case DTLK_STATUS:
284 portval = inb_p(dtlk_port_tts);
285 return put_user(portval, argp);
287 default:
288 return -EINVAL;
292 /* Note that nobody ever sets dtlk_busy... */
293 static int dtlk_open(struct inode *inode, struct file *file)
295 TRACE_TEXT("(dtlk_open");
297 cycle_kernel_lock();
298 nonseekable_open(inode, file);
299 switch (iminor(inode)) {
300 case DTLK_MINOR:
301 if (dtlk_busy)
302 return -EBUSY;
303 return nonseekable_open(inode, file);
305 default:
306 return -ENXIO;
310 static int dtlk_release(struct inode *inode, struct file *file)
312 TRACE_TEXT("(dtlk_release");
314 switch (iminor(inode)) {
315 case DTLK_MINOR:
316 break;
318 default:
319 break;
321 TRACE_RET;
323 del_timer_sync(&dtlk_timer);
325 return 0;
328 static int __init dtlk_init(void)
330 int err;
332 dtlk_port_lpc = 0;
333 dtlk_port_tts = 0;
334 dtlk_busy = 0;
335 dtlk_major = register_chrdev(0, "dtlk", &dtlk_fops);
336 if (dtlk_major < 0) {
337 printk(KERN_ERR "DoubleTalk PC - cannot register device\n");
338 return dtlk_major;
340 err = dtlk_dev_probe();
341 if (err) {
342 unregister_chrdev(dtlk_major, "dtlk");
343 return err;
345 printk(", MAJOR %d\n", dtlk_major);
347 init_waitqueue_head(&dtlk_process_list);
349 return 0;
352 static void __exit dtlk_cleanup (void)
354 dtlk_write_bytes("goodbye", 8);
355 msleep_interruptible(500); /* nap 0.50 sec but
356 could be awakened
357 earlier by
358 signals... */
360 dtlk_write_tts(DTLK_CLEAR);
361 unregister_chrdev(dtlk_major, "dtlk");
362 release_region(dtlk_port_lpc, DTLK_IO_EXTENT);
365 module_init(dtlk_init);
366 module_exit(dtlk_cleanup);
368 /* ------------------------------------------------------------------------ */
370 static int dtlk_readable(void)
372 #ifdef TRACING
373 printk(" dtlk_readable=%u@%u", inb_p(dtlk_port_lpc) != 0x7f, jiffies);
374 #endif
375 return inb_p(dtlk_port_lpc) != 0x7f;
378 static int dtlk_writeable(void)
380 /* TRACE_TEXT(" dtlk_writeable"); */
381 #ifdef TRACINGMORE
382 printk(" dtlk_writeable=%u", (inb_p(dtlk_port_tts) & TTS_WRITABLE)!=0);
383 #endif
384 return inb_p(dtlk_port_tts) & TTS_WRITABLE;
387 static int __init dtlk_dev_probe(void)
389 unsigned int testval = 0;
390 int i = 0;
391 struct dtlk_settings *sp;
393 if (dtlk_port_lpc | dtlk_port_tts)
394 return -EBUSY;
396 for (i = 0; dtlk_portlist[i]; i++) {
397 #if 0
398 printk("DoubleTalk PC - Port %03x = %04x\n",
399 dtlk_portlist[i], (testval = inw_p(dtlk_portlist[i])));
400 #endif
402 if (!request_region(dtlk_portlist[i], DTLK_IO_EXTENT,
403 "dtlk"))
404 continue;
405 testval = inw_p(dtlk_portlist[i]);
406 if ((testval &= 0xfbff) == 0x107f) {
407 dtlk_port_lpc = dtlk_portlist[i];
408 dtlk_port_tts = dtlk_port_lpc + 1;
410 sp = dtlk_interrogate();
411 printk("DoubleTalk PC at %03x-%03x, "
412 "ROM version %s, serial number %u",
413 dtlk_portlist[i], dtlk_portlist[i] +
414 DTLK_IO_EXTENT - 1,
415 sp->rom_version, sp->serial_number);
417 /* put LPC port into known state, so
418 dtlk_readable() gives valid result */
419 outb_p(0xff, dtlk_port_lpc);
421 /* INIT string and index marker */
422 dtlk_write_bytes("\036\1@\0\0012I\r", 8);
423 /* posting an index takes 18 msec. Here, we
424 wait up to 100 msec to see whether it
425 appears. */
426 msleep_interruptible(100);
427 dtlk_has_indexing = dtlk_readable();
428 #ifdef TRACING
429 printk(", indexing %d\n", dtlk_has_indexing);
430 #endif
431 #ifdef INSCOPE
433 /* This macro records ten samples read from the LPC port, for later display */
434 #define LOOK \
435 for (i = 0; i < 10; i++) \
437 buffer[b++] = inb_p(dtlk_port_lpc); \
438 __delay(loops_per_jiffy/(1000000/HZ)); \
440 char buffer[1000];
441 int b = 0, i, j;
443 LOOK
444 outb_p(0xff, dtlk_port_lpc);
445 buffer[b++] = 0;
446 LOOK
447 dtlk_write_bytes("\0012I\r", 4);
448 buffer[b++] = 0;
449 __delay(50 * loops_per_jiffy / (1000/HZ));
450 outb_p(0xff, dtlk_port_lpc);
451 buffer[b++] = 0;
452 LOOK
454 printk("\n");
455 for (j = 0; j < b; j++)
456 printk(" %02x", buffer[j]);
457 printk("\n");
459 #endif /* INSCOPE */
461 #ifdef OUTSCOPE
463 /* This macro records ten samples read from the TTS port, for later display */
464 #define LOOK \
465 for (i = 0; i < 10; i++) \
467 buffer[b++] = inb_p(dtlk_port_tts); \
468 __delay(loops_per_jiffy/(1000000/HZ)); /* 1 us */ \
470 char buffer[1000];
471 int b = 0, i, j;
473 mdelay(10); /* 10 ms */
474 LOOK
475 outb_p(0x03, dtlk_port_tts);
476 buffer[b++] = 0;
477 LOOK
478 LOOK
480 printk("\n");
481 for (j = 0; j < b; j++)
482 printk(" %02x", buffer[j]);
483 printk("\n");
485 #endif /* OUTSCOPE */
487 dtlk_write_bytes("Double Talk found", 18);
489 return 0;
491 release_region(dtlk_portlist[i], DTLK_IO_EXTENT);
494 printk(KERN_INFO "DoubleTalk PC - not found\n");
495 return -ENODEV;
499 static void dtlk_handle_error(char op, char rc, unsigned int minor)
501 printk(KERN_INFO"\nDoubleTalk PC - MINOR: %d, OPCODE: %d, ERROR: %d\n",
502 minor, op, rc);
503 return;
507 /* interrogate the DoubleTalk PC and return its settings */
508 static struct dtlk_settings *dtlk_interrogate(void)
510 unsigned char *t;
511 static char buf[sizeof(struct dtlk_settings) + 1];
512 int total, i;
513 static struct dtlk_settings status;
514 TRACE_TEXT("(dtlk_interrogate");
515 dtlk_write_bytes("\030\001?", 3);
516 for (total = 0, i = 0; i < 50; i++) {
517 buf[total] = dtlk_read_tts();
518 if (total > 2 && buf[total] == 0x7f)
519 break;
520 if (total < sizeof(struct dtlk_settings))
521 total++;
524 if (i==50) printk("interrogate() read overrun\n");
525 for (i=0; i<sizeof(buf); i++)
526 printk(" %02x", buf[i]);
527 printk("\n");
529 t = buf;
530 status.serial_number = t[0] + t[1] * 256; /* serial number is
531 little endian */
532 t += 2;
534 i = 0;
535 while (*t != '\r') {
536 status.rom_version[i] = *t;
537 if (i < sizeof(status.rom_version) - 1)
538 i++;
539 t++;
541 status.rom_version[i] = 0;
542 t++;
544 status.mode = *t++;
545 status.punc_level = *t++;
546 status.formant_freq = *t++;
547 status.pitch = *t++;
548 status.speed = *t++;
549 status.volume = *t++;
550 status.tone = *t++;
551 status.expression = *t++;
552 status.ext_dict_loaded = *t++;
553 status.ext_dict_status = *t++;
554 status.free_ram = *t++;
555 status.articulation = *t++;
556 status.reverb = *t++;
557 status.eob = *t++;
558 status.has_indexing = dtlk_has_indexing;
559 TRACE_RET;
560 return &status;
563 static char dtlk_read_tts(void)
565 int portval, retries = 0;
566 char ch;
567 TRACE_TEXT("(dtlk_read_tts");
569 /* verify DT is ready, read char, wait for ACK */
570 do {
571 portval = inb_p(dtlk_port_tts);
572 } while ((portval & TTS_READABLE) == 0 &&
573 retries++ < DTLK_MAX_RETRIES);
574 if (retries == DTLK_MAX_RETRIES)
575 printk(KERN_ERR "dtlk_read_tts() timeout\n");
577 ch = inb_p(dtlk_port_tts); /* input from TTS port */
578 ch &= 0x7f;
579 outb_p(ch, dtlk_port_tts);
581 retries = 0;
582 do {
583 portval = inb_p(dtlk_port_tts);
584 } while ((portval & TTS_READABLE) != 0 &&
585 retries++ < DTLK_MAX_RETRIES);
586 if (retries == DTLK_MAX_RETRIES)
587 printk(KERN_ERR "dtlk_read_tts() timeout\n");
589 TRACE_RET;
590 return ch;
593 static char dtlk_read_lpc(void)
595 int retries = 0;
596 char ch;
597 TRACE_TEXT("(dtlk_read_lpc");
599 /* no need to test -- this is only called when the port is readable */
601 ch = inb_p(dtlk_port_lpc); /* input from LPC port */
603 outb_p(0xff, dtlk_port_lpc);
605 /* acknowledging a read takes 3-4
606 usec. Here, we wait up to 20 usec
607 for the acknowledgement */
608 retries = (loops_per_jiffy * 20) / (1000000/HZ);
609 while (inb_p(dtlk_port_lpc) != 0x7f && --retries > 0);
610 if (retries == 0)
611 printk(KERN_ERR "dtlk_read_lpc() timeout\n");
613 TRACE_RET;
614 return ch;
617 /* write n bytes to tts port */
618 static char dtlk_write_bytes(const char *buf, int n)
620 char val = 0;
621 /* printk("dtlk_write_bytes(\"%-*s\", %d)\n", n, buf, n); */
622 TRACE_TEXT("(dtlk_write_bytes");
623 while (n-- > 0)
624 val = dtlk_write_tts(*buf++);
625 TRACE_RET;
626 return val;
629 static char dtlk_write_tts(char ch)
631 int retries = 0;
632 #ifdef TRACINGMORE
633 printk(" dtlk_write_tts(");
634 if (' ' <= ch && ch <= '~')
635 printk("'%c'", ch);
636 else
637 printk("0x%02x", ch);
638 #endif
639 if (ch != DTLK_CLEAR) /* no flow control for CLEAR command */
640 while ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0 &&
641 retries++ < DTLK_MAX_RETRIES) /* DT ready? */
643 if (retries == DTLK_MAX_RETRIES)
644 printk(KERN_ERR "dtlk_write_tts() timeout\n");
646 outb_p(ch, dtlk_port_tts); /* output to TTS port */
647 /* the RDY bit goes zero 2-3 usec after writing, and goes
648 1 again 180-190 usec later. Here, we wait up to 10
649 usec for the RDY bit to go zero. */
650 for (retries = 0; retries < loops_per_jiffy / (100000/HZ); retries++)
651 if ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0)
652 break;
654 #ifdef TRACINGMORE
655 printk(")\n");
656 #endif
657 return 0;
660 MODULE_LICENSE("GPL");