[S390] call nmi_enter/nmi_exit on machine checks
[linux-2.6/mini2440.git] / arch / s390 / kernel / nmi.c
blob28cf196ba775e0e956024a123576fa15b5da1021
1 /*
2 * Machine check handler
4 * Copyright IBM Corp. 2000,2009
5 * Author(s): Ingo Adlung <adlung@de.ibm.com>,
6 * Martin Schwidefsky <schwidefsky@de.ibm.com>,
7 * Cornelia Huck <cornelia.huck@de.ibm.com>,
8 * Heiko Carstens <heiko.carstens@de.ibm.com>,
9 */
11 #include <linux/init.h>
12 #include <linux/errno.h>
13 #include <linux/hardirq.h>
14 #include <linux/time.h>
15 #include <linux/module.h>
16 #include <asm/lowcore.h>
17 #include <asm/smp.h>
18 #include <asm/etr.h>
19 #include <asm/cpu.h>
20 #include <asm/nmi.h>
21 #include <asm/crw.h>
23 struct mcck_struct {
24 int kill_task;
25 int channel_report;
26 int warning;
27 unsigned long long mcck_code;
30 static DEFINE_PER_CPU(struct mcck_struct, cpu_mcck);
32 static NORET_TYPE void s390_handle_damage(char *msg)
34 smp_send_stop();
35 disabled_wait((unsigned long) __builtin_return_address(0));
36 while (1);
40 * Main machine check handler function. Will be called with interrupts enabled
41 * or disabled and machine checks enabled or disabled.
43 void s390_handle_mcck(void)
45 unsigned long flags;
46 struct mcck_struct mcck;
49 * Disable machine checks and get the current state of accumulated
50 * machine checks. Afterwards delete the old state and enable machine
51 * checks again.
53 local_irq_save(flags);
54 local_mcck_disable();
55 mcck = __get_cpu_var(cpu_mcck);
56 memset(&__get_cpu_var(cpu_mcck), 0, sizeof(struct mcck_struct));
57 clear_thread_flag(TIF_MCCK_PENDING);
58 local_mcck_enable();
59 local_irq_restore(flags);
61 if (mcck.channel_report)
62 crw_handle_channel_report();
64 * A warning may remain for a prolonged period on the bare iron.
65 * (actually until the machine is powered off, or the problem is gone)
66 * So we just stop listening for the WARNING MCH and avoid continuously
67 * being interrupted. One caveat is however, that we must do this per
68 * processor and cannot use the smp version of ctl_clear_bit().
69 * On VM we only get one interrupt per virtally presented machinecheck.
70 * Though one suffices, we may get one interrupt per (virtual) cpu.
72 if (mcck.warning) { /* WARNING pending ? */
73 static int mchchk_wng_posted = 0;
75 /* Use single cpu clear, as we cannot handle smp here. */
76 __ctl_clear_bit(14, 24); /* Disable WARNING MCH */
77 if (xchg(&mchchk_wng_posted, 1) == 0)
78 kill_cad_pid(SIGPWR, 1);
80 if (mcck.kill_task) {
81 local_irq_enable();
82 printk(KERN_EMERG "mcck: Terminating task because of machine "
83 "malfunction (code 0x%016llx).\n", mcck.mcck_code);
84 printk(KERN_EMERG "mcck: task: %s, pid: %d.\n",
85 current->comm, current->pid);
86 do_exit(SIGSEGV);
89 EXPORT_SYMBOL_GPL(s390_handle_mcck);
92 * returns 0 if all registers could be validated
93 * returns 1 otherwise
95 static int notrace s390_revalidate_registers(struct mci *mci)
97 int kill_task;
98 u64 tmpclock;
99 u64 zero;
100 void *fpt_save_area, *fpt_creg_save_area;
102 kill_task = 0;
103 zero = 0;
105 if (!mci->gr) {
107 * General purpose registers couldn't be restored and have
108 * unknown contents. Process needs to be terminated.
110 kill_task = 1;
112 if (!mci->fp) {
114 * Floating point registers can't be restored and
115 * therefore the process needs to be terminated.
117 kill_task = 1;
119 #ifndef CONFIG_64BIT
120 asm volatile(
121 " ld 0,0(%0)\n"
122 " ld 2,8(%0)\n"
123 " ld 4,16(%0)\n"
124 " ld 6,24(%0)"
125 : : "a" (&S390_lowcore.floating_pt_save_area));
126 #endif
128 if (MACHINE_HAS_IEEE) {
129 #ifdef CONFIG_64BIT
130 fpt_save_area = &S390_lowcore.floating_pt_save_area;
131 fpt_creg_save_area = &S390_lowcore.fpt_creg_save_area;
132 #else
133 fpt_save_area = (void *) S390_lowcore.extended_save_area_addr;
134 fpt_creg_save_area = fpt_save_area + 128;
135 #endif
136 if (!mci->fc) {
138 * Floating point control register can't be restored.
139 * Task will be terminated.
141 asm volatile("lfpc 0(%0)" : : "a" (&zero), "m" (zero));
142 kill_task = 1;
144 } else
145 asm volatile("lfpc 0(%0)" : : "a" (fpt_creg_save_area));
147 asm volatile(
148 " ld 0,0(%0)\n"
149 " ld 1,8(%0)\n"
150 " ld 2,16(%0)\n"
151 " ld 3,24(%0)\n"
152 " ld 4,32(%0)\n"
153 " ld 5,40(%0)\n"
154 " ld 6,48(%0)\n"
155 " ld 7,56(%0)\n"
156 " ld 8,64(%0)\n"
157 " ld 9,72(%0)\n"
158 " ld 10,80(%0)\n"
159 " ld 11,88(%0)\n"
160 " ld 12,96(%0)\n"
161 " ld 13,104(%0)\n"
162 " ld 14,112(%0)\n"
163 " ld 15,120(%0)\n"
164 : : "a" (fpt_save_area));
166 /* Revalidate access registers */
167 asm volatile(
168 " lam 0,15,0(%0)"
169 : : "a" (&S390_lowcore.access_regs_save_area));
170 if (!mci->ar) {
172 * Access registers have unknown contents.
173 * Terminating task.
175 kill_task = 1;
177 /* Revalidate control registers */
178 if (!mci->cr) {
180 * Control registers have unknown contents.
181 * Can't recover and therefore stopping machine.
183 s390_handle_damage("invalid control registers.");
184 } else {
185 #ifdef CONFIG_64BIT
186 asm volatile(
187 " lctlg 0,15,0(%0)"
188 : : "a" (&S390_lowcore.cregs_save_area));
189 #else
190 asm volatile(
191 " lctl 0,15,0(%0)"
192 : : "a" (&S390_lowcore.cregs_save_area));
193 #endif
196 * We don't even try to revalidate the TOD register, since we simply
197 * can't write something sensible into that register.
199 #ifdef CONFIG_64BIT
201 * See if we can revalidate the TOD programmable register with its
202 * old contents (should be zero) otherwise set it to zero.
204 if (!mci->pr)
205 asm volatile(
206 " sr 0,0\n"
207 " sckpf"
208 : : : "0", "cc");
209 else
210 asm volatile(
211 " l 0,0(%0)\n"
212 " sckpf"
213 : : "a" (&S390_lowcore.tod_progreg_save_area)
214 : "0", "cc");
215 #endif
216 /* Revalidate clock comparator register */
217 asm volatile(
218 " stck 0(%1)\n"
219 " sckc 0(%1)"
220 : "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
222 /* Check if old PSW is valid */
223 if (!mci->wp)
225 * Can't tell if we come from user or kernel mode
226 * -> stopping machine.
228 s390_handle_damage("old psw invalid.");
230 if (!mci->ms || !mci->pm || !mci->ia)
231 kill_task = 1;
233 return kill_task;
236 #define MAX_IPD_COUNT 29
237 #define MAX_IPD_TIME (5 * 60 * USEC_PER_SEC) /* 5 minutes */
239 #define ED_STP_ISLAND 6 /* External damage STP island check */
240 #define ED_STP_SYNC 7 /* External damage STP sync check */
241 #define ED_ETR_SYNC 12 /* External damage ETR sync check */
242 #define ED_ETR_SWITCH 13 /* External damage ETR switch to local */
245 * machine check handler.
247 void notrace s390_do_machine_check(struct pt_regs *regs)
249 static int ipd_count;
250 static DEFINE_SPINLOCK(ipd_lock);
251 static unsigned long long last_ipd;
252 struct mcck_struct *mcck;
253 unsigned long long tmp;
254 struct mci *mci;
255 int umode;
257 nmi_enter();
258 s390_idle_check();
260 mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
261 mcck = &__get_cpu_var(cpu_mcck);
262 umode = user_mode(regs);
264 if (mci->sd) {
265 /* System damage -> stopping machine */
266 s390_handle_damage("received system damage machine check.");
268 if (mci->pd) {
269 if (mci->b) {
270 /* Processing backup -> verify if we can survive this */
271 u64 z_mcic, o_mcic, t_mcic;
272 #ifdef CONFIG_64BIT
273 z_mcic = (1ULL<<63 | 1ULL<<59 | 1ULL<<29);
274 o_mcic = (1ULL<<43 | 1ULL<<42 | 1ULL<<41 | 1ULL<<40 |
275 1ULL<<36 | 1ULL<<35 | 1ULL<<34 | 1ULL<<32 |
276 1ULL<<30 | 1ULL<<21 | 1ULL<<20 | 1ULL<<17 |
277 1ULL<<16);
278 #else
279 z_mcic = (1ULL<<63 | 1ULL<<59 | 1ULL<<57 | 1ULL<<50 |
280 1ULL<<29);
281 o_mcic = (1ULL<<43 | 1ULL<<42 | 1ULL<<41 | 1ULL<<40 |
282 1ULL<<36 | 1ULL<<35 | 1ULL<<34 | 1ULL<<32 |
283 1ULL<<30 | 1ULL<<20 | 1ULL<<17 | 1ULL<<16);
284 #endif
285 t_mcic = *(u64 *)mci;
287 if (((t_mcic & z_mcic) != 0) ||
288 ((t_mcic & o_mcic) != o_mcic)) {
289 s390_handle_damage("processing backup machine "
290 "check with damage.");
294 * Nullifying exigent condition, therefore we might
295 * retry this instruction.
297 spin_lock(&ipd_lock);
298 tmp = get_clock();
299 if (((tmp - last_ipd) >> 12) < MAX_IPD_TIME)
300 ipd_count++;
301 else
302 ipd_count = 1;
303 last_ipd = tmp;
304 if (ipd_count == MAX_IPD_COUNT)
305 s390_handle_damage("too many ipd retries.");
306 spin_unlock(&ipd_lock);
307 } else {
308 /* Processing damage -> stopping machine */
309 s390_handle_damage("received instruction processing "
310 "damage machine check.");
313 if (s390_revalidate_registers(mci)) {
314 if (umode) {
316 * Couldn't restore all register contents while in
317 * user mode -> mark task for termination.
319 mcck->kill_task = 1;
320 mcck->mcck_code = *(unsigned long long *) mci;
321 set_thread_flag(TIF_MCCK_PENDING);
322 } else {
324 * Couldn't restore all register contents while in
325 * kernel mode -> stopping machine.
327 s390_handle_damage("unable to revalidate registers.");
330 if (mci->cd) {
331 /* Timing facility damage */
332 s390_handle_damage("TOD clock damaged");
334 if (mci->ed && mci->ec) {
335 /* External damage */
336 if (S390_lowcore.external_damage_code & (1U << ED_ETR_SYNC))
337 etr_sync_check();
338 if (S390_lowcore.external_damage_code & (1U << ED_ETR_SWITCH))
339 etr_switch_to_local();
340 if (S390_lowcore.external_damage_code & (1U << ED_STP_SYNC))
341 stp_sync_check();
342 if (S390_lowcore.external_damage_code & (1U << ED_STP_ISLAND))
343 stp_island_check();
345 if (mci->se)
346 /* Storage error uncorrected */
347 s390_handle_damage("received storage error uncorrected "
348 "machine check.");
349 if (mci->ke)
350 /* Storage key-error uncorrected */
351 s390_handle_damage("received storage key-error uncorrected "
352 "machine check.");
353 if (mci->ds && mci->fa)
354 /* Storage degradation */
355 s390_handle_damage("received storage degradation machine "
356 "check.");
357 if (mci->cp) {
358 /* Channel report word pending */
359 mcck->channel_report = 1;
360 set_thread_flag(TIF_MCCK_PENDING);
362 if (mci->w) {
363 /* Warning pending */
364 mcck->warning = 1;
365 set_thread_flag(TIF_MCCK_PENDING);
367 nmi_exit();
370 static int __init machine_check_init(void)
372 ctl_set_bit(14, 25); /* enable external damage MCH */
373 ctl_set_bit(14, 27); /* enable system recovery MCH */
374 ctl_set_bit(14, 24); /* enable warning MCH */
375 return 0;
377 arch_initcall(machine_check_init);