drivers/staging/winbond/wbhal_f.h

   1 //=====================================================================
   2 // Device related include
   3 //=====================================================================
   4 #ifdef WB_LINUX
   5         #include "linux/wbusb_f.h"
   6         #include "linux/wb35reg_f.h"
   7         #include "linux/wb35tx_f.h"
   8         #include "linux/wb35rx_f.h"
   9 #else
  10         #include "wbusb_f.h"
  11         #include "wb35reg_f.h"
  12         #include "wb35tx_f.h"
  13         #include "wb35rx_f.h"
  14 #endif
  15
  16 //====================================================================================
  17 // Function declaration
  18 //====================================================================================
  19 void hal_remove_mapping_key(  phw_data_t pHwData,  PUCHAR pmac_addr );
  20 void hal_remove_default_key(  phw_data_t pHwData,  u32 index );
  21 unsigned char hal_set_mapping_key(  phw_data_t Adapter,  PUCHAR pmac_addr,  u8 null_key,  u8 wep_on,  PUCHAR ptx_tsc,  PUCHAR prx_tsc,  u8 key_type,  u8 key_len,  PUCHAR pkey_data );
  22 unsigned char hal_set_default_key(  phw_data_t Adapter,  u8 index,  u8 null_key,  u8 wep_on,  PUCHAR ptx_tsc,  PUCHAR prx_tsc,  u8 key_type,  u8 key_len,  PUCHAR pkey_data );
  23 void hal_clear_all_default_key(  phw_data_t pHwData );
  24 void hal_clear_all_group_key(  phw_data_t pHwData );
  25 void hal_clear_all_mapping_key(  phw_data_t pHwData );
  26 void hal_clear_all_key(  phw_data_t pHwData );
  27 void hal_get_ethernet_address(  phw_data_t pHwData,  PUCHAR current_address );
  28 void hal_set_ethernet_address(  phw_data_t pHwData,  PUCHAR current_address );
  29 void hal_get_permanent_address(  phw_data_t pHwData,  PUCHAR pethernet_address );
  30 unsigned char hal_init_hardware(  phw_data_t pHwData,  PADAPTER Adapter );
  31 void hal_set_power_save_mode(  phw_data_t pHwData,  unsigned char power_save,  unsigned char wakeup,  unsigned char dtim );
  32 void hal_get_power_save_mode(  phw_data_t pHwData,   PBOOLEAN pin_pwr_save );
  33 void hal_set_slot_time(  phw_data_t pHwData,  u8 type );
  34 #define hal_set_atim_window( _A, _ATM )
  35 void hal_set_rates(  phw_data_t pHwData,  PUCHAR pbss_rates,  u8 length,  unsigned char basic_rate_set );
  36 #define hal_set_basic_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, TRUE )
  37 #define hal_set_op_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, FALSE )
  38 void hal_start_bss(  phw_data_t pHwData,  u8 mac_op_mode );
  39 void hal_join_request(  phw_data_t pHwData,  u8 bss_type ); // 0:BSS STA 1:IBSS STA//
  40 void hal_stop_sync_bss(  phw_data_t pHwData );
  41 void hal_resume_sync_bss(  phw_data_t pHwData);
  42 void hal_set_aid(  phw_data_t pHwData,  u16 aid );
  43 void hal_set_bssid(  phw_data_t pHwData,  PUCHAR pbssid );
  44 void hal_get_bssid(  phw_data_t pHwData,  PUCHAR pbssid );
  45 void hal_set_beacon_period(  phw_data_t pHwData,  u16 beacon_period );
  46 void hal_set_listen_interval(  phw_data_t pHwData,  u16 listen_interval );
  47 void hal_set_cap_info(  phw_data_t pHwData,  u16 capability_info );
  48 void hal_set_ssid(  phw_data_t pHwData,  PUCHAR pssid,  u8 ssid_len );
  49 void hal_set_current_channel(  phw_data_t pHwData,  ChanInfo channel );
  50 void hal_set_current_channel_ex(  phw_data_t pHwData,  ChanInfo channel );
  51 void hal_get_current_channel(  phw_data_t pHwData,  ChanInfo *channel );
  52 void hal_set_accept_broadcast(  phw_data_t pHwData,  u8 enable );
  53 void hal_set_accept_multicast(  phw_data_t pHwData,  u8 enable );
  54 void hal_set_accept_beacon(  phw_data_t pHwData,  u8 enable );
  55 void hal_set_multicast_address(  phw_data_t pHwData,  PUCHAR address,  u8 number );
  56 u8 hal_get_accept_beacon(  phw_data_t pHwData );
  57 void hal_stop(  phw_data_t pHwData );
  58 void hal_halt(  phw_data_t pHwData, void *ppa_data );
  59 void hal_start_tx0(  phw_data_t pHwData );
  60 void hal_set_phy_type(  phw_data_t pHwData,  u8 PhyType );
  61 void hal_get_phy_type(  phw_data_t pHwData,  u8 *PhyType );
  62 unsigned char hal_reset_hardware(  phw_data_t pHwData,  void* ppa );
  63 void hal_set_cwmin(  phw_data_t pHwData,  u8    cwin_min );
  64 #define hal_get_cwmin( _A ) ( (_A)->cwmin )
  65 void hal_set_cwmax(  phw_data_t pHwData,  u16 cwin_max );
  66 #define hal_get_cwmax( _A ) ( (_A)->cwmax )
  67 void hal_set_rsn_wpa(  phw_data_t pHwData,  u32 * RSN_IE_Bitmap , u32 * RSN_OUI_type , unsigned char bDesiredAuthMode);
  68 //s32 hal_get_rssi(  phw_data_t pHwData,  u32 HalRssi );
  69 s32 hal_get_rssi(  phw_data_t pHwData,  u32 *HalRssiArry,  u8 Count );
  70 s32 hal_get_rssi_bss(  phw_data_t pHwData,  u16 idx,  u8 Count );
  71 void hal_set_connect_info(  phw_data_t pHwData,  unsigned char boConnect );
  72 u8 hal_get_est_sq3(  phw_data_t pHwData,  u8 Count );
  73 void hal_led_control_1a(  phw_data_t pHwData );
  74 void hal_led_control(  void* S1,  phw_data_t pHwData,  void* S3,  void* S4 );
  75 void hal_set_rf_power(  phw_data_t pHwData,  u8 PowerIndex ); // 20060621 Modify
  76 void hal_reset_counter(  phw_data_t pHwData );
  77 void hal_set_radio_mode(  phw_data_t pHwData,  unsigned char boValue);
  78 void hal_descriptor_indicate(  phw_data_t pHwData,  PDESCRIPTOR pDes );
  79 u8 hal_get_antenna_number(  phw_data_t pHwData );
  80 void hal_set_antenna_number(  phw_data_t pHwData, u8 number );
  81 u32 hal_get_bss_pk_cnt(  phw_data_t pHwData );
  82 #define hal_get_region_from_EEPROM( _A ) ( (_A)->Wb35Reg.EEPROMRegion )
  83 void hal_set_accept_promiscuous         (  phw_data_t pHwData,  u8 enable);
  84 #define hal_get_tx_buffer( _A, _B ) Wb35Tx_get_tx_buffer( _A, _B )
  85 u8 hal_get_hw_radio_off                 (  phw_data_t pHwData );
  86 #define hal_software_set( _A )          (_A->SoftwareSet)
  87 #define hal_driver_init_OK( _A )        (_A->IsInitOK)
  88 #define hal_rssi_boundary_high( _A ) (_A->RSSI_high)
  89 #define hal_rssi_boundary_low( _A ) (_A->RSSI_low)
  90 #define hal_scan_interval( _A )         (_A->Scan_Interval)
  91 void hal_scan_status_indicate(  phw_data_t pHwData, u8 status); // 0: complete, 1: in progress
  92 void hal_system_power_change(  phw_data_t pHwData, u32 PowerState ); // 20051230 -=D0 1=D1 ..
  93 void hal_surprise_remove(  phw_data_t pHwData );
  94
  95 #define PHY_DEBUG( msg, args... )
  96
  97
  98
  99 void hal_rate_change(  phw_data_t pHwData ); // Notify the HAL rate is changing 20060613.1
 100 unsigned char hal_get_dxx_reg(  phw_data_t pHwData,  u16 number,  PULONG pValue );
 101 unsigned char hal_set_dxx_reg(  phw_data_t pHwData,  u16 number,  u32 value );
 102 #define hal_get_time_count( _P )        (_P->time_count/10)     // return 100ms count
 103 #define hal_detect_error( _P )          (_P->WbUsb.DetectCount)
 104 unsigned char hal_set_LED(  phw_data_t pHwData,  u32 Mode ); // 20061108 for WPS led control
 105
 106 //-------------------------------------------------------------------------
 107 // The follow function is unused for IS89C35
 108 //-------------------------------------------------------------------------
 109 #define hal_disable_interrupt(_A)
 110 #define hal_enable_interrupt(_A)
 111 #define hal_get_interrupt_type( _A)
 112 #define hal_get_clear_interrupt(_A)
 113 #define hal_ibss_disconnect(_A) hal_stop_sync_bss(_A)
 114 #define hal_join_request_stop(_A)
 115 unsigned char   hal_idle(  phw_data_t pHwData );
 116 #define pa_stall_execution( _A )        //OS_SLEEP( 1 )
 117 #define hw_get_cxx_reg( _A, _B, _C )
 118 #define hw_set_cxx_reg( _A, _B, _C )
 119 #define hw_get_dxx_reg( _A, _B, _C )    hal_get_dxx_reg( _A, _B, (PULONG)_C )
 120 #define hw_set_dxx_reg( _A, _B, _C )    hal_set_dxx_reg( _A, _B, (u32)_C )
 121
 122