?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
[linux-2.6/mini2440.git] / drivers / net / hp100.c
blobde3f49f991a3d61c3f25362414b649c673cf2612
1 /*
2 ** hp100.c
3 ** HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters
4 **
5 ** $Id: hp100.c,v 1.58 2001/09/24 18:03:01 perex Exp perex $
6 **
7 ** Based on the HP100 driver written by Jaroslav Kysela <perex@jcu.cz>
8 ** Extended for new busmaster capable chipsets by
9 ** Siegfried "Frieder" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>
10 **
11 ** Maintained by: Jaroslav Kysela <perex@perex.cz>
12 **
13 ** This driver has only been tested with
14 ** -- HP J2585B 10/100 Mbit/s PCI Busmaster
15 ** -- HP J2585A 10/100 Mbit/s PCI
16 ** -- HP J2970A 10 Mbit/s PCI Combo 10base-T/BNC
17 ** -- HP J2973A 10 Mbit/s PCI 10base-T
18 ** -- HP J2573 10/100 ISA
19 ** -- Compex ReadyLink ENET100-VG4 10/100 Mbit/s PCI / EISA
20 ** -- Compex FreedomLine 100/VG 10/100 Mbit/s ISA / EISA / PCI
21 **
22 ** but it should also work with the other CASCADE based adapters.
23 **
24 ** TODO:
25 ** - J2573 seems to hang sometimes when in shared memory mode.
26 ** - Mode for Priority TX
27 ** - Check PCI registers, performance might be improved?
28 ** - To reduce interrupt load in busmaster, one could switch off
29 ** the interrupts that are used to refill the queues whenever the
30 ** queues are filled up to more than a certain threshold.
31 ** - some updates for EISA version of card
32 **
33 **
34 ** This code is free software; you can redistribute it and/or modify
35 ** it under the terms of the GNU General Public License as published by
36 ** the Free Software Foundation; either version 2 of the License, or
37 ** (at your option) any later version.
38 **
39 ** This code is distributed in the hope that it will be useful,
40 ** but WITHOUT ANY WARRANTY; without even the implied warranty of
41 ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
42 ** GNU General Public License for more details.
43 **
44 ** You should have received a copy of the GNU General Public License
45 ** along with this program; if not, write to the Free Software
46 ** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
47 **
48 ** 1.57c -> 1.58
49 ** - used indent to change coding-style
50 ** - added KTI DP-200 EISA ID
51 ** - ioremap is also used for low (<1MB) memory (multi-architecture support)
52 **
53 ** 1.57b -> 1.57c - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
54 ** - release resources on failure in init_module
55 **
56 ** 1.57 -> 1.57b - Jean II
57 ** - fix spinlocks, SMP is now working !
58 **
59 ** 1.56 -> 1.57
60 ** - updates for new PCI interface for 2.1 kernels
61 **
62 ** 1.55 -> 1.56
63 ** - removed printk in misc. interrupt and update statistics to allow
64 ** monitoring of card status
65 ** - timing changes in xmit routines, relogin to 100VG hub added when
66 ** driver does reset
67 ** - included fix for Compex FreedomLine PCI adapter
68 **
69 ** 1.54 -> 1.55
70 ** - fixed bad initialization in init_module
71 ** - added Compex FreedomLine adapter
72 ** - some fixes in card initialization
73 **
74 ** 1.53 -> 1.54
75 ** - added hardware multicast filter support (doesn't work)
76 ** - little changes in hp100_sense_lan routine
77 ** - added support for Coax and AUI (J2970)
78 ** - fix for multiple cards and hp100_mode parameter (insmod)
79 ** - fix for shared IRQ
80 **
81 ** 1.52 -> 1.53
82 ** - fixed bug in multicast support
83 **
84 */
85
86 #define HP100_DEFAULT_PRIORITY_TX 0
87
88 #undef HP100_DEBUG
89 #undef HP100_DEBUG_B /* Trace */
90 #undef HP100_DEBUG_BM /* Debug busmaster code (PDL stuff) */
91
92 #undef HP100_DEBUG_TRAINING /* Debug login-to-hub procedure */
93 #undef HP100_DEBUG_TX
94 #undef HP100_DEBUG_IRQ
95 #undef HP100_DEBUG_RX
96
97 #undef HP100_MULTICAST_FILTER /* Need to be debugged... */
98
99 #include <linux/module.h>
100 #include <linux/kernel.h>
101 #include <linux/string.h>
102 #include <linux/errno.h>
103 #include <linux/ioport.h>
104 #include <linux/slab.h>
105 #include <linux/interrupt.h>
106 #include <linux/eisa.h>
107 #include <linux/pci.h>
108 #include <linux/dma-mapping.h>
109 #include <linux/spinlock.h>
110 #include <linux/netdevice.h>
111 #include <linux/etherdevice.h>
112 #include <linux/skbuff.h>
113 #include <linux/types.h>
114 #include <linux/delay.h>
115 #include <linux/init.h>
116 #include <linux/bitops.h>
117 #include <linux/jiffies.h>
118
119 #include <asm/io.h>
120
121 #include "hp100.h"
122
123 /*
124 * defines
125 */
126
127 #define HP100_BUS_ISA 0
128 #define HP100_BUS_EISA 1
129 #define HP100_BUS_PCI 2
130
131 #define HP100_REGION_SIZE 0x20 /* for ioports */
132 #define HP100_SIG_LEN 8 /* same as EISA_SIG_LEN */
133
134 #define HP100_MAX_PACKET_SIZE (1536+4)
135 #define HP100_MIN_PACKET_SIZE 60
136
137 #ifndef HP100_DEFAULT_RX_RATIO
138 /* default - 75% onboard memory on the card are used for RX packets */
139 #define HP100_DEFAULT_RX_RATIO 75
140 #endif
141
142 #ifndef HP100_DEFAULT_PRIORITY_TX
143 /* default - don't enable transmit outgoing packets as priority */
144 #define HP100_DEFAULT_PRIORITY_TX 0
145 #endif
146
147 /*
148 * structures
149 */
150
151 struct hp100_private {
152 spinlock_t lock;
153 char id[HP100_SIG_LEN];
154 u_short chip;
155 u_short soft_model;
156 u_int memory_size;
157 u_int virt_memory_size;
158 u_short rx_ratio; /* 1 - 99 */
159 u_short priority_tx; /* != 0 - priority tx */
160 u_short mode; /* PIO, Shared Mem or Busmaster */
161 u_char bus;
162 struct pci_dev *pci_dev;
163 short mem_mapped; /* memory mapped access */
164 void __iomem *mem_ptr_virt; /* virtual memory mapped area, maybe NULL */
165 unsigned long mem_ptr_phys; /* physical memory mapped area */
166 short lan_type; /* 10Mb/s, 100Mb/s or -1 (error) */
167 int hub_status; /* was login to hub successful? */
168 u_char mac1_mode;
169 u_char mac2_mode;
170 u_char hash_bytes[8];
171 struct net_device_stats stats;
172
173 /* Rings for busmaster mode: */
174 hp100_ring_t *rxrhead; /* Head (oldest) index into rxring */
175 hp100_ring_t *rxrtail; /* Tail (newest) index into rxring */
176 hp100_ring_t *txrhead; /* Head (oldest) index into txring */
177 hp100_ring_t *txrtail; /* Tail (newest) index into txring */
178
179 hp100_ring_t rxring[MAX_RX_PDL];
180 hp100_ring_t txring[MAX_TX_PDL];
181
182 u_int *page_vaddr_algn; /* Aligned virtual address of allocated page */
183 u_long whatever_offset; /* Offset to bus/phys/dma address */
184 int rxrcommit; /* # Rx PDLs commited to adapter */
185 int txrcommit; /* # Tx PDLs commited to adapter */
186 };
187
188 /*
189 * variables
190 */
191 #ifdef CONFIG_ISA
192 static const char *hp100_isa_tbl[] = {
193 "HWPF150", /* HP J2573 rev A */
194 "HWP1950", /* HP J2573 */
195 };
196 #endif
197
198 #ifdef CONFIG_EISA
199 static struct eisa_device_id hp100_eisa_tbl[] = {
200 { "HWPF180" }, /* HP J2577 rev A */
201 { "HWP1920" }, /* HP 27248B */
202 { "HWP1940" }, /* HP J2577 */
203 { "HWP1990" }, /* HP J2577 */
204 { "CPX0301" }, /* ReadyLink ENET100-VG4 */
205 { "CPX0401" }, /* FreedomLine 100/VG */
206 { "" } /* Mandatory final entry ! */
207 };
208 MODULE_DEVICE_TABLE(eisa, hp100_eisa_tbl);
209 #endif
210
211 #ifdef CONFIG_PCI
212 static struct pci_device_id hp100_pci_tbl[] = {
213 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585A, PCI_ANY_ID, PCI_ANY_ID,},
214 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585B, PCI_ANY_ID, PCI_ANY_ID,},
215 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2970A, PCI_ANY_ID, PCI_ANY_ID,},
216 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2973A, PCI_ANY_ID, PCI_ANY_ID,},
217 {PCI_VENDOR_ID_COMPEX, PCI_DEVICE_ID_COMPEX_ENET100VG4, PCI_ANY_ID, PCI_ANY_ID,},
218 {PCI_VENDOR_ID_COMPEX2, PCI_DEVICE_ID_COMPEX2_100VG, PCI_ANY_ID, PCI_ANY_ID,},
219 /* {PCI_VENDOR_ID_KTI, PCI_DEVICE_ID_KTI_DP200, PCI_ANY_ID, PCI_ANY_ID }, */
220 {} /* Terminating entry */
221 };
222 MODULE_DEVICE_TABLE(pci, hp100_pci_tbl);
223 #endif
224
225 static int hp100_rx_ratio = HP100_DEFAULT_RX_RATIO;
226 static int hp100_priority_tx = HP100_DEFAULT_PRIORITY_TX;
227 static int hp100_mode = 1;
228
229 module_param(hp100_rx_ratio, int, 0);
230 module_param(hp100_priority_tx, int, 0);
231 module_param(hp100_mode, int, 0);
232
233 /*
234 * prototypes
235 */
236
237 static int hp100_probe1(struct net_device *dev, int ioaddr, u_char bus,
238 struct pci_dev *pci_dev);
239
240
241 static int hp100_open(struct net_device *dev);
242 static int hp100_close(struct net_device *dev);
243 static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev);
244 static int hp100_start_xmit_bm(struct sk_buff *skb,
245 struct net_device *dev);
246 static void hp100_rx(struct net_device *dev);
247 static struct net_device_stats *hp100_get_stats(struct net_device *dev);
248 static void hp100_misc_interrupt(struct net_device *dev);
249 static void hp100_update_stats(struct net_device *dev);
250 static void hp100_clear_stats(struct hp100_private *lp, int ioaddr);
251 static void hp100_set_multicast_list(struct net_device *dev);
252 static irqreturn_t hp100_interrupt(int irq, void *dev_id);
253 static void hp100_start_interface(struct net_device *dev);
254 static void hp100_stop_interface(struct net_device *dev);
255 static void hp100_load_eeprom(struct net_device *dev, u_short ioaddr);
256 static int hp100_sense_lan(struct net_device *dev);
257 static int hp100_login_to_vg_hub(struct net_device *dev,
258 u_short force_relogin);
259 static int hp100_down_vg_link(struct net_device *dev);
260 static void hp100_cascade_reset(struct net_device *dev, u_short enable);
261 static void hp100_BM_shutdown(struct net_device *dev);
262 static void hp100_mmuinit(struct net_device *dev);
263 static void hp100_init_pdls(struct net_device *dev);
264 static int hp100_init_rxpdl(struct net_device *dev,
265 register hp100_ring_t * ringptr,
266 register u_int * pdlptr);
267 static int hp100_init_txpdl(struct net_device *dev,
268 register hp100_ring_t * ringptr,
269 register u_int * pdlptr);
270 static void hp100_rxfill(struct net_device *dev);
271 static void hp100_hwinit(struct net_device *dev);
272 static void hp100_clean_txring(struct net_device *dev);
273 #ifdef HP100_DEBUG
274 static void hp100_RegisterDump(struct net_device *dev);
275 #endif
276
277 /* Conversion to new PCI API :
278 * Convert an address in a kernel buffer to a bus/phys/dma address.
279 * This work *only* for memory fragments part of lp->page_vaddr,
280 * because it was properly DMA allocated via pci_alloc_consistent(),
281 * so we just need to "retrieve" the original mapping to bus/phys/dma
282 * address - Jean II */
283 static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 * ptr)
284 {
285 struct hp100_private *lp = netdev_priv(dev);
286 return ((u_long) ptr) + lp->whatever_offset;
287 }
288
289 static inline u_int pdl_map_data(struct hp100_private *lp, void *data)
290 {
291 return pci_map_single(lp->pci_dev, data,
292 MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE);
293 }
294
295 /* TODO: This function should not really be needed in a good design... */
296 static void wait(void)
297 {
298 mdelay(1);
299 }
300
301 /*
302 * probe functions
303 * These functions should - if possible - avoid doing write operations
304 * since this could cause problems when the card is not installed.
305 */
306
307 /*
308 * Read board id and convert to string.
309 * Effectively same code as decode_eisa_sig
310 */
311 static __devinit const char *hp100_read_id(int ioaddr)
312 {
313 int i;
314 static char str[HP100_SIG_LEN];
315 unsigned char sig[4], sum;
316 unsigned short rev;
317
318 hp100_page(ID_MAC_ADDR);
319 sum = 0;
320 for (i = 0; i < 4; i++) {
321 sig[i] = hp100_inb(BOARD_ID + i);
322 sum += sig[i];
323 }
324
325 sum += hp100_inb(BOARD_ID + i);
326 if (sum != 0xff)
327 return NULL; /* bad checksum */
328
329 str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
330 str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
331 str[2] = (sig[1] & 0x1f) + ('A' - 1);
332 rev = (sig[2] << 8) | sig[3];
333 sprintf(str + 3, "%04X", rev);
334
335 return str;
336 }
337
338 #ifdef CONFIG_ISA
339 static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr)
340 {
341 const char *sig;
342 int i;
343
344 if (!request_region(ioaddr, HP100_REGION_SIZE, "hp100"))
345 goto err;
346
347 if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE) {
348 release_region(ioaddr, HP100_REGION_SIZE);
349 goto err;
350 }
351
352 sig = hp100_read_id(ioaddr);
353 release_region(ioaddr, HP100_REGION_SIZE);
354
355 if (sig == NULL)
356 goto err;
357
358 for (i = 0; i < ARRAY_SIZE(hp100_isa_tbl); i++) {
359 if (!strcmp(hp100_isa_tbl[i], sig))
360 break;
361
362 }
363
364 if (i < ARRAY_SIZE(hp100_isa_tbl))
365 return hp100_probe1(dev, ioaddr, HP100_BUS_ISA, NULL);
366 err:
367 return -ENODEV;
368
369 }
370 /*
371 * Probe for ISA board.
372 * EISA and PCI are handled by device infrastructure.
373 */
374
375 static int __init hp100_isa_probe(struct net_device *dev, int addr)
376 {
377 int err = -ENODEV;
378
379 /* Probe for a specific ISA address */
380 if (addr > 0xff && addr < 0x400)
381 err = hp100_isa_probe1(dev, addr);
382
383 else if (addr != 0)
384 err = -ENXIO;
385
386 else {
387 /* Probe all ISA possible port regions */
388 for (addr = 0x100; addr < 0x400; addr += 0x20) {
389 err = hp100_isa_probe1(dev, addr);
390 if (!err)
391 break;
392 }
393 }
394 return err;
395 }
396 #endif /* CONFIG_ISA */
397
398 #if !defined(MODULE) && defined(CONFIG_ISA)
399 struct net_device * __init hp100_probe(int unit)
400 {
401 struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
402 int err;
403
404 if (!dev)
405 return ERR_PTR(-ENODEV);
406
407 #ifdef HP100_DEBUG_B
408 hp100_outw(0x4200, TRACE);
409 printk("hp100: %s: probe\n", dev->name);
410 #endif
411
412 if (unit >= 0) {
413 sprintf(dev->name, "eth%d", unit);
414 netdev_boot_setup_check(dev);
415 }
416
417 err = hp100_isa_probe(dev, dev->base_addr);
418 if (err)
419 goto out;
420
421 return dev;
422 out:
423 free_netdev(dev);
424 return ERR_PTR(err);
425 }
426 #endif /* !MODULE && CONFIG_ISA */
427
428 static const struct net_device_ops hp100_bm_netdev_ops = {
429 .ndo_open = hp100_open,
430 .ndo_stop = hp100_close,
431 .ndo_start_xmit = hp100_start_xmit_bm,
432 .ndo_get_stats = hp100_get_stats,
433 .ndo_set_multicast_list = hp100_set_multicast_list,
434 .ndo_change_mtu = eth_change_mtu,
435 .ndo_set_mac_address = eth_mac_addr,
436 .ndo_validate_addr = eth_validate_addr,
437 };
438
439 static const struct net_device_ops hp100_netdev_ops = {
440 .ndo_open = hp100_open,
441 .ndo_stop = hp100_close,
442 .ndo_start_xmit = hp100_start_xmit,
443 .ndo_get_stats = hp100_get_stats,
444 .ndo_set_multicast_list = hp100_set_multicast_list,
445 .ndo_change_mtu = eth_change_mtu,
446 .ndo_set_mac_address = eth_mac_addr,
447 .ndo_validate_addr = eth_validate_addr,
448 };
449
450 static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
451 u_char bus, struct pci_dev *pci_dev)
452 {
453 int i;
454 int err = -ENODEV;
455 const char *eid;
456 u_int chip;
457 u_char uc;
458 u_int memory_size = 0, virt_memory_size = 0;
459 u_short local_mode, lsw;
460 short mem_mapped;
461 unsigned long mem_ptr_phys;
462 void __iomem *mem_ptr_virt;
463 struct hp100_private *lp;
464
465 #ifdef HP100_DEBUG_B
466 hp100_outw(0x4201, TRACE);
467 printk("hp100: %s: probe1\n", dev->name);
468 #endif
469
470 /* memory region for programmed i/o */
471 if (!request_region(ioaddr, HP100_REGION_SIZE, "hp100"))
472 goto out1;
473
474 if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE)
475 goto out2;
476
477 chip = hp100_inw(PAGING) & HP100_CHIPID_MASK;
478 #ifdef HP100_DEBUG
479 if (chip == HP100_CHIPID_SHASTA)
480 printk("hp100: %s: Shasta Chip detected. (This is a pre 802.12 chip)\n", dev->name);
481 else if (chip == HP100_CHIPID_RAINIER)
482 printk("hp100: %s: Rainier Chip detected. (This is a pre 802.12 chip)\n", dev->name);
483 else if (chip == HP100_CHIPID_LASSEN)
484 printk("hp100: %s: Lassen Chip detected.\n", dev->name);
485 else
486 printk("hp100: %s: Warning: Unknown CASCADE chip (id=0x%.4x).\n", dev->name, chip);
487 #endif
488
489 dev->base_addr = ioaddr;
490
491 eid = hp100_read_id(ioaddr);
492 if (eid == NULL) { /* bad checksum? */
493 printk(KERN_WARNING "hp100_probe: bad ID checksum at base port 0x%x\n", ioaddr);
494 goto out2;
495 }
496
497 hp100_page(ID_MAC_ADDR);
498 for (i = uc = 0; i < 7; i++)
499 uc += hp100_inb(LAN_ADDR + i);
500 if (uc != 0xff) {
501 printk(KERN_WARNING "hp100_probe: bad lan address checksum at port 0x%x)\n", ioaddr);
502 err = -EIO;
503 goto out2;
504 }
505
506 /* Make sure, that all registers are correctly updated... */
507
508 hp100_load_eeprom(dev, ioaddr);
509 wait();
510
511 /*
512 * Determine driver operation mode
513 *
514 * Use the variable "hp100_mode" upon insmod or as kernel parameter to
515 * force driver modes:
516 * hp100_mode=1 -> default, use busmaster mode if configured.
517 * hp100_mode=2 -> enable shared memory mode
518 * hp100_mode=3 -> force use of i/o mapped mode.
519 * hp100_mode=4 -> same as 1, but re-set the enable bit on the card.
520 */
521
522 /*
523 * LSW values:
524 * 0x2278 -> J2585B, PnP shared memory mode
525 * 0x2270 -> J2585B, shared memory mode, 0xdc000
526 * 0xa23c -> J2585B, I/O mapped mode
527 * 0x2240 -> EISA COMPEX, BusMaster (Shasta Chip)
528 * 0x2220 -> EISA HP, I/O (Shasta Chip)
529 * 0x2260 -> EISA HP, BusMaster (Shasta Chip)
530 */
531
532 #if 0
533 local_mode = 0x2270;
534 hp100_outw(0xfefe, OPTION_LSW);
535 hp100_outw(local_mode | HP100_SET_LB | HP100_SET_HB, OPTION_LSW);
536 #endif
537
538 /* hp100_mode value maybe used in future by another card */
539 local_mode = hp100_mode;
540 if (local_mode < 1 || local_mode > 4)
541 local_mode = 1; /* default */
542 #ifdef HP100_DEBUG
543 printk("hp100: %s: original LSW = 0x%x\n", dev->name,
544 hp100_inw(OPTION_LSW));
545 #endif
546
547 if (local_mode == 3) {
548 hp100_outw(HP100_MEM_EN | HP100_RESET_LB, OPTION_LSW);
549 hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
550 hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_RESET_HB, OPTION_LSW);
551 printk("hp100: IO mapped mode forced.\n");
552 } else if (local_mode == 2) {
553 hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW);
554 hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
555 hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_RESET_HB, OPTION_LSW);
556 printk("hp100: Shared memory mode requested.\n");
557 } else if (local_mode == 4) {
558 if (chip == HP100_CHIPID_LASSEN) {
559 hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_SET_HB, OPTION_LSW);
560 hp100_outw(HP100_IO_EN | HP100_MEM_EN | HP100_RESET_LB, OPTION_LSW);
561 printk("hp100: Busmaster mode requested.\n");
562 }
563 local_mode = 1;
564 }
565
566 if (local_mode == 1) { /* default behaviour */
567 lsw = hp100_inw(OPTION_LSW);
568
569 if ((lsw & HP100_IO_EN) && (~lsw & HP100_MEM_EN) &&
570 (~lsw & (HP100_BM_WRITE | HP100_BM_READ))) {
571 #ifdef HP100_DEBUG
572 printk("hp100: %s: IO_EN bit is set on card.\n", dev->name);
573 #endif
574 local_mode = 3;
575 } else if (chip == HP100_CHIPID_LASSEN &&
576 (lsw & (HP100_BM_WRITE | HP100_BM_READ)) == (HP100_BM_WRITE | HP100_BM_READ)) {
577 /* Conversion to new PCI API :
578 * I don't have the doc, but I assume that the card
579 * can map the full 32bit address space.
580 * Also, we can have EISA Busmaster cards (not tested),
581 * so beware !!! - Jean II */
582 if((bus == HP100_BUS_PCI) &&
583 (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32)))) {
584 /* Gracefully fallback to shared memory */
585 goto busmasterfail;
586 }
587 printk("hp100: Busmaster mode enabled.\n");
588 hp100_outw(HP100_MEM_EN | HP100_IO_EN | HP100_RESET_LB, OPTION_LSW);
589 } else {
590 busmasterfail:
591 #ifdef HP100_DEBUG
592 printk("hp100: %s: Card not configured for BM or BM not supported with this card.\n", dev->name);
593 printk("hp100: %s: Trying shared memory mode.\n", dev->name);
594 #endif
595 /* In this case, try shared memory mode */
596 local_mode = 2;
597 hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW);
598 /* hp100_outw(HP100_IO_EN|HP100_RESET_LB, OPTION_LSW); */
599 }
600 }
601 #ifdef HP100_DEBUG
602 printk("hp100: %s: new LSW = 0x%x\n", dev->name, hp100_inw(OPTION_LSW));
603 #endif
604
605 /* Check for shared memory on the card, eventually remap it */
606 hp100_page(HW_MAP);
607 mem_mapped = ((hp100_inw(OPTION_LSW) & (HP100_MEM_EN)) != 0);
608 mem_ptr_phys = 0UL;
609 mem_ptr_virt = NULL;
610 memory_size = (8192 << ((hp100_inb(SRAM) >> 5) & 0x07));
611 virt_memory_size = 0;
612
613 /* For memory mapped or busmaster mode, we want the memory address */
614 if (mem_mapped || (local_mode == 1)) {
615 mem_ptr_phys = (hp100_inw(MEM_MAP_LSW) | (hp100_inw(MEM_MAP_MSW) << 16));
616 mem_ptr_phys &= ~0x1fff; /* 8k alignment */
617
618 if (bus == HP100_BUS_ISA && (mem_ptr_phys & ~0xfffff) != 0) {
619 printk("hp100: Can only use programmed i/o mode.\n");
620 mem_ptr_phys = 0;
621 mem_mapped = 0;
622 local_mode = 3; /* Use programmed i/o */
623 }
624
625 /* We do not need access to shared memory in busmaster mode */
626 /* However in slave mode we need to remap high (>1GB) card memory */
627 if (local_mode != 1) { /* = not busmaster */
628 /* We try with smaller memory sizes, if ioremap fails */
629 for (virt_memory_size = memory_size; virt_memory_size > 16383; virt_memory_size >>= 1) {
630 if ((mem_ptr_virt = ioremap((u_long) mem_ptr_phys, virt_memory_size)) == NULL) {
631 #ifdef HP100_DEBUG
632 printk("hp100: %s: ioremap for 0x%x bytes high PCI memory at 0x%lx failed\n", dev->name, virt_memory_size, mem_ptr_phys);
633 #endif
634 } else {
635 #ifdef HP100_DEBUG
636 printk("hp100: %s: remapped 0x%x bytes high PCI memory at 0x%lx to %p.\n", dev->name, virt_memory_size, mem_ptr_phys, mem_ptr_virt);
637 #endif
638 break;
639 }
640 }
641
642 if (mem_ptr_virt == NULL) { /* all ioremap tries failed */
643 printk("hp100: Failed to ioremap the PCI card memory. Will have to use i/o mapped mode.\n");
644 local_mode = 3;
645 virt_memory_size = 0;
646 }
647 }
648 }
649
650 if (local_mode == 3) { /* io mapped forced */
651 mem_mapped = 0;
652 mem_ptr_phys = 0;
653 mem_ptr_virt = NULL;
654 printk("hp100: Using (slow) programmed i/o mode.\n");
655 }
656
657 /* Initialise the "private" data structure for this card. */
658 lp = netdev_priv(dev);
659
660 spin_lock_init(&lp->lock);
661 strlcpy(lp->id, eid, HP100_SIG_LEN);
662 lp->chip = chip;
663 lp->mode = local_mode;
664 lp->bus = bus;
665 lp->pci_dev = pci_dev;
666 lp->priority_tx = hp100_priority_tx;
667 lp->rx_ratio = hp100_rx_ratio;
668 lp->mem_ptr_phys = mem_ptr_phys;
669 lp->mem_ptr_virt = mem_ptr_virt;
670 hp100_page(ID_MAC_ADDR);
671 lp->soft_model = hp100_inb(SOFT_MODEL);
672 lp->mac1_mode = HP100_MAC1MODE3;
673 lp->mac2_mode = HP100_MAC2MODE3;
674 memset(&lp->hash_bytes, 0x00, 8);
675
676 dev->base_addr = ioaddr;
677
678 lp->memory_size = memory_size;
679 lp->virt_memory_size = virt_memory_size;
680 lp->rx_ratio = hp100_rx_ratio; /* can be conf'd with insmod */
681
682 if (lp->mode == 1) /* busmaster */
683 dev->netdev_ops = &hp100_bm_netdev_ops;
684 else
685 dev->netdev_ops = &hp100_netdev_ops;
686
687 /* Ask the card for which IRQ line it is configured */
688 if (bus == HP100_BUS_PCI) {
689 dev->irq = pci_dev->irq;
690 } else {
691 hp100_page(HW_MAP);
692 dev->irq = hp100_inb(IRQ_CHANNEL) & HP100_IRQMASK;
693 if (dev->irq == 2)
694 dev->irq = 9;
695 }
696
697 if (lp->mode == 1) /* busmaster */
698 dev->dma = 4;
699
700 /* Ask the card for its MAC address and store it for later use. */
701 hp100_page(ID_MAC_ADDR);
702 for (i = uc = 0; i < 6; i++)
703 dev->dev_addr[i] = hp100_inb(LAN_ADDR + i);
704
705 /* Reset statistics (counters) */
706 hp100_clear_stats(lp, ioaddr);
707
708 /* If busmaster mode is wanted, a dma-capable memory area is needed for
709 * the rx and tx PDLs
710 * PCI cards can access the whole PC memory. Therefore GFP_DMA is not
711 * needed for the allocation of the memory area.
712 */
713
714 /* TODO: We do not need this with old cards, where PDLs are stored
715 * in the cards shared memory area. But currently, busmaster has been
716 * implemented/tested only with the lassen chip anyway... */
717 if (lp->mode == 1) { /* busmaster */
718 dma_addr_t page_baddr;
719 /* Get physically continous memory for TX & RX PDLs */
720 /* Conversion to new PCI API :
721 * Pages are always aligned and zeroed, no need to it ourself.
722 * Doc says should be OK for EISA bus as well - Jean II */
723 if ((lp->page_vaddr_algn = pci_alloc_consistent(lp->pci_dev, MAX_RINGSIZE, &page_baddr)) == NULL) {
724 err = -ENOMEM;
725 goto out2;
726 }
727 lp->whatever_offset = ((u_long) page_baddr) - ((u_long) lp->page_vaddr_algn);
728
729 #ifdef HP100_DEBUG_BM
730 printk("hp100: %s: Reserved DMA memory from 0x%x to 0x%x\n", dev->name, (u_int) lp->page_vaddr_algn, (u_int) lp->page_vaddr_algn + MAX_RINGSIZE);
731 #endif
732 lp->rxrcommit = lp->txrcommit = 0;
733 lp->rxrhead = lp->rxrtail = &(lp->rxring[0]);
734 lp->txrhead = lp->txrtail = &(lp->txring[0]);
735 }
736
737 /* Initialise the card. */
738 /* (I'm not really sure if it's a good idea to do this during probing, but
739 * like this it's assured that the lan connection type can be sensed
740 * correctly)
741 */
742 hp100_hwinit(dev);
743
744 /* Try to find out which kind of LAN the card is connected to. */
745 lp->lan_type = hp100_sense_lan(dev);
746
747 /* Print out a message what about what we think we have probed. */
748 printk("hp100: at 0x%x, IRQ %d, ", ioaddr, dev->irq);
749 switch (bus) {
750 case HP100_BUS_EISA:
751 printk("EISA");
752 break;
753 case HP100_BUS_PCI:
754 printk("PCI");
755 break;
756 default:
757 printk("ISA");
758 break;
759 }
760 printk(" bus, %dk SRAM (rx/tx %d%%).\n", lp->memory_size >> 10, lp->rx_ratio);
761
762 if (lp->mode == 2) { /* memory mapped */
763 printk("hp100: Memory area at 0x%lx-0x%lx", mem_ptr_phys,
764 (mem_ptr_phys + (mem_ptr_phys > 0x100000 ? (u_long) lp->memory_size : 16 * 1024)) - 1);
765 if (mem_ptr_virt)
766 printk(" (virtual base %p)", mem_ptr_virt);
767 printk(".\n");
768
769 /* Set for info when doing ifconfig */
770 dev->mem_start = mem_ptr_phys;
771 dev->mem_end = mem_ptr_phys + lp->memory_size;
772 }
773
774 printk("hp100: ");
775 if (lp->lan_type != HP100_LAN_ERR)
776 printk("Adapter is attached to ");
777 switch (lp->lan_type) {
778 case HP100_LAN_100:
779 printk("100Mb/s Voice Grade AnyLAN network.\n");
780 break;
781 case HP100_LAN_10:
782 printk("10Mb/s network (10baseT).\n");
783 break;
784 case HP100_LAN_COAX:
785 printk("10Mb/s network (coax).\n");
786 break;
787 default:
788 printk("Warning! Link down.\n");
789 }
790
791 err = register_netdev(dev);
792 if (err)
793 goto out3;
794
795 return 0;
796 out3:
797 if (local_mode == 1)
798 pci_free_consistent(lp->pci_dev, MAX_RINGSIZE + 0x0f,
799 lp->page_vaddr_algn,
800 virt_to_whatever(dev, lp->page_vaddr_algn));
801 if (mem_ptr_virt)
802 iounmap(mem_ptr_virt);
803 out2:
804 release_region(ioaddr, HP100_REGION_SIZE);
805 out1:
806 return err;
807 }
808
809 /* This procedure puts the card into a stable init state */
810 static void hp100_hwinit(struct net_device *dev)
811 {
812 int ioaddr = dev->base_addr;
813 struct hp100_private *lp = netdev_priv(dev);
814
815 #ifdef HP100_DEBUG_B
816 hp100_outw(0x4202, TRACE);
817 printk("hp100: %s: hwinit\n", dev->name);
818 #endif
819
820 /* Initialise the card. -------------------------------------------- */
821
822 /* Clear all pending Ints and disable Ints */
823 hp100_page(PERFORMANCE);
824 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
825 hp100_outw(0xffff, IRQ_STATUS); /* clear all pending ints */
826
827 hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
828 hp100_outw(HP100_TRI_INT | HP100_SET_HB, OPTION_LSW);
829
830 if (lp->mode == 1) {
831 hp100_BM_shutdown(dev); /* disables BM, puts cascade in reset */
832 wait();
833 } else {
834 hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
835 hp100_cascade_reset(dev, 1);
836 hp100_page(MAC_CTRL);
837 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1);
838 }
839
840 /* Initiate EEPROM reload */
841 hp100_load_eeprom(dev, 0);
842
843 wait();
844
845 /* Go into reset again. */
846 hp100_cascade_reset(dev, 1);
847
848 /* Set Option Registers to a safe state */
849 hp100_outw(HP100_DEBUG_EN |
850 HP100_RX_HDR |
851 HP100_EE_EN |
852 HP100_BM_WRITE |
853 HP100_BM_READ | HP100_RESET_HB |
854 HP100_FAKE_INT |
855 HP100_INT_EN |
856 HP100_MEM_EN |
857 HP100_IO_EN | HP100_RESET_LB, OPTION_LSW);
858
859 hp100_outw(HP100_TRI_INT |
860 HP100_MMAP_DIS | HP100_SET_HB, OPTION_LSW);
861
862 hp100_outb(HP100_PRIORITY_TX |
863 HP100_ADV_NXT_PKT |
864 HP100_TX_CMD | HP100_RESET_LB, OPTION_MSW);
865
866 /* TODO: Configure MMU for Ram Test. */
867 /* TODO: Ram Test. */
868
869 /* Re-check if adapter is still at same i/o location */
870 /* (If the base i/o in eeprom has been changed but the */
871 /* registers had not been changed, a reload of the eeprom */
872 /* would move the adapter to the address stored in eeprom */
873
874 /* TODO: Code to implement. */
875
876 /* Until here it was code from HWdiscover procedure. */
877 /* Next comes code from mmuinit procedure of SCO BM driver which is
878 * called from HWconfigure in the SCO driver. */
879
880 /* Initialise MMU, eventually switch on Busmaster Mode, initialise
881 * multicast filter...
882 */
883 hp100_mmuinit(dev);
884
885 /* We don't turn the interrupts on here - this is done by start_interface. */
886 wait(); /* TODO: Do we really need this? */
887
888 /* Enable Hardware (e.g. unreset) */
889 hp100_cascade_reset(dev, 0);
890
891 /* ------- initialisation complete ----------- */
892
893 /* Finally try to log in the Hub if there may be a VG connection. */
894 if ((lp->lan_type == HP100_LAN_100) || (lp->lan_type == HP100_LAN_ERR))
895 hp100_login_to_vg_hub(dev, 0); /* relogin */
896
897 }
898
899
900 /*
901 * mmuinit - Reinitialise Cascade MMU and MAC settings.
902 * Note: Must already be in reset and leaves card in reset.
903 */
904 static void hp100_mmuinit(struct net_device *dev)
905 {
906 int ioaddr = dev->base_addr;
907 struct hp100_private *lp = netdev_priv(dev);
908 int i;
909
910 #ifdef HP100_DEBUG_B
911 hp100_outw(0x4203, TRACE);
912 printk("hp100: %s: mmuinit\n", dev->name);
913 #endif
914
915 #ifdef HP100_DEBUG
916 if (0 != (hp100_inw(OPTION_LSW) & HP100_HW_RST)) {
917 printk("hp100: %s: Not in reset when entering mmuinit. Fix me.\n", dev->name);
918 return;
919 }
920 #endif
921
922 /* Make sure IRQs are masked off and ack'ed. */
923 hp100_page(PERFORMANCE);
924 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
925 hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
926
927 /*
928 * Enable Hardware
929 * - Clear Debug En, Rx Hdr Pipe, EE En, I/O En, Fake Int and Intr En
930 * - Set Tri-State Int, Bus Master Rd/Wr, and Mem Map Disable
931 * - Clear Priority, Advance Pkt and Xmit Cmd
932 */
933
934 hp100_outw(HP100_DEBUG_EN |
935 HP100_RX_HDR |
936 HP100_EE_EN | HP100_RESET_HB |
937 HP100_IO_EN |
938 HP100_FAKE_INT |
939 HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
940
941 hp100_outw(HP100_TRI_INT | HP100_SET_HB, OPTION_LSW);
942
943 if (lp->mode == 1) { /* busmaster */
944 hp100_outw(HP100_BM_WRITE |
945 HP100_BM_READ |
946 HP100_MMAP_DIS | HP100_SET_HB, OPTION_LSW);
947 } else if (lp->mode == 2) { /* memory mapped */
948 hp100_outw(HP100_BM_WRITE |
949 HP100_BM_READ | HP100_RESET_HB, OPTION_LSW);
950 hp100_outw(HP100_MMAP_DIS | HP100_RESET_HB, OPTION_LSW);
951 hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW);
952 hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
953 } else if (lp->mode == 3) { /* i/o mapped mode */
954 hp100_outw(HP100_MMAP_DIS | HP100_SET_HB |
955 HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
956 }
957
958 hp100_page(HW_MAP);
959 hp100_outb(0, EARLYRXCFG);
960 hp100_outw(0, EARLYTXCFG);
961
962 /*
963 * Enable Bus Master mode
964 */
965 if (lp->mode == 1) { /* busmaster */
966 /* Experimental: Set some PCI configuration bits */
967 hp100_page(HW_MAP);
968 hp100_andb(~HP100_PDL_USE3, MODECTRL1); /* BM engine read maximum */
969 hp100_andb(~HP100_TX_DUALQ, MODECTRL1); /* No Queue for Priority TX */
970
971 /* PCI Bus failures should result in a Misc. Interrupt */
972 hp100_orb(HP100_EN_BUS_FAIL, MODECTRL2);
973
974 hp100_outw(HP100_BM_READ | HP100_BM_WRITE | HP100_SET_HB, OPTION_LSW);
975 hp100_page(HW_MAP);
976 /* Use Burst Mode and switch on PAGE_CK */
977 hp100_orb(HP100_BM_BURST_RD | HP100_BM_BURST_WR, BM);
978 if ((lp->chip == HP100_CHIPID_RAINIER) || (lp->chip == HP100_CHIPID_SHASTA))
979 hp100_orb(HP100_BM_PAGE_CK, BM);
980 hp100_orb(HP100_BM_MASTER, BM);
981 } else { /* not busmaster */
982
983 hp100_page(HW_MAP);
984 hp100_andb(~HP100_BM_MASTER, BM);
985 }
986
987 /*
988 * Divide card memory into regions for Rx, Tx and, if non-ETR chip, PDLs
989 */
990 hp100_page(MMU_CFG);
991 if (lp->mode == 1) { /* only needed for Busmaster */
992 int xmit_stop, recv_stop;
993
994 if ((lp->chip == HP100_CHIPID_RAINIER)
995 || (lp->chip == HP100_CHIPID_SHASTA)) {
996 int pdl_stop;
997
998 /*
999 * Each pdl is 508 bytes long. (63 frags * 4 bytes for address and
1000 * 4 bytes for header). We will leave NUM_RXPDLS * 508 (rounded
1001 * to the next higher 1k boundary) bytes for the rx-pdl's
1002 * Note: For non-etr chips the transmit stop register must be
1003 * programmed on a 1k boundary, i.e. bits 9:0 must be zero.
1004 */
1005 pdl_stop = lp->memory_size;
1006 xmit_stop = (pdl_stop - 508 * (MAX_RX_PDL) - 16) & ~(0x03ff);
1007 recv_stop = (xmit_stop * (lp->rx_ratio) / 100) & ~(0x03ff);
1008 hp100_outw((pdl_stop >> 4) - 1, PDL_MEM_STOP);
1009 #ifdef HP100_DEBUG_BM
1010 printk("hp100: %s: PDL_STOP = 0x%x\n", dev->name, pdl_stop);
1011 #endif
1012 } else {
1013 /* ETR chip (Lassen) in busmaster mode */
1014 xmit_stop = (lp->memory_size) - 1;
1015 recv_stop = ((lp->memory_size * lp->rx_ratio) / 100) & ~(0x03ff);
1016 }
1017
1018 hp100_outw(xmit_stop >> 4, TX_MEM_STOP);
1019 hp100_outw(recv_stop >> 4, RX_MEM_STOP);
1020 #ifdef HP100_DEBUG_BM
1021 printk("hp100: %s: TX_STOP = 0x%x\n", dev->name, xmit_stop >> 4);
1022 printk("hp100: %s: RX_STOP = 0x%x\n", dev->name, recv_stop >> 4);
1023 #endif
1024 } else {
1025 /* Slave modes (memory mapped and programmed io) */
1026 hp100_outw((((lp->memory_size * lp->rx_ratio) / 100) >> 4), RX_MEM_STOP);
1027 hp100_outw(((lp->memory_size - 1) >> 4), TX_MEM_STOP);
1028 #ifdef HP100_DEBUG
1029 printk("hp100: %s: TX_MEM_STOP: 0x%x\n", dev->name, hp100_inw(TX_MEM_STOP));
1030 printk("hp100: %s: RX_MEM_STOP: 0x%x\n", dev->name, hp100_inw(RX_MEM_STOP));
1031 #endif
1032 }
1033
1034 /* Write MAC address into page 1 */
1035 hp100_page(MAC_ADDRESS);
1036 for (i = 0; i < 6; i++)
1037 hp100_outb(dev->dev_addr[i], MAC_ADDR + i);
1038
1039 /* Zero the multicast hash registers */
1040 for (i = 0; i < 8; i++)
1041 hp100_outb(0x0, HASH_BYTE0 + i);
1042
1043 /* Set up MAC defaults */
1044 hp100_page(MAC_CTRL);
1045
1046 /* Go to LAN Page and zero all filter bits */
1047 /* Zero accept error, accept multicast, accept broadcast and accept */
1048 /* all directed packet bits */
1049 hp100_andb(~(HP100_RX_EN |
1050 HP100_TX_EN |
1051 HP100_ACC_ERRORED |
1052 HP100_ACC_MC |
1053 HP100_ACC_BC | HP100_ACC_PHY), MAC_CFG_1);
1054
1055 hp100_outb(0x00, MAC_CFG_2);
1056
1057 /* Zero the frame format bit. This works around a training bug in the */
1058 /* new hubs. */
1059 hp100_outb(0x00, VG_LAN_CFG_2); /* (use 802.3) */
1060
1061 if (lp->priority_tx)
1062 hp100_outb(HP100_PRIORITY_TX | HP100_SET_LB, OPTION_MSW);
1063 else
1064 hp100_outb(HP100_PRIORITY_TX | HP100_RESET_LB, OPTION_MSW);
1065
1066 hp100_outb(HP100_ADV_NXT_PKT |
1067 HP100_TX_CMD | HP100_RESET_LB, OPTION_MSW);
1068
1069 /* If busmaster, initialize the PDLs */
1070 if (lp->mode == 1)
1071 hp100_init_pdls(dev);
1072
1073 /* Go to performance page and initalize isr and imr registers */
1074 hp100_page(PERFORMANCE);
1075 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
1076 hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
1077 }
1078
1079 /*
1080 * open/close functions
1081 */
1082
1083 static int hp100_open(struct net_device *dev)
1084 {
1085 struct hp100_private *lp = netdev_priv(dev);
1086 #ifdef HP100_DEBUG_B
1087 int ioaddr = dev->base_addr;
1088 #endif
1089
1090 #ifdef HP100_DEBUG_B
1091 hp100_outw(0x4204, TRACE);
1092 printk("hp100: %s: open\n", dev->name);
1093 #endif
1094
1095 /* New: if bus is PCI or EISA, interrupts might be shared interrupts */
1096 if (request_irq(dev->irq, hp100_interrupt,
1097 lp->bus == HP100_BUS_PCI || lp->bus ==
1098 HP100_BUS_EISA ? IRQF_SHARED : IRQF_DISABLED,
1099 "hp100", dev)) {
1100 printk("hp100: %s: unable to get IRQ %d\n", dev->name, dev->irq);
1101 return -EAGAIN;
1102 }
1103
1104 dev->trans_start = jiffies;
1105 netif_start_queue(dev);
1106
1107 lp->lan_type = hp100_sense_lan(dev);
1108 lp->mac1_mode = HP100_MAC1MODE3;
1109 lp->mac2_mode = HP100_MAC2MODE3;
1110 memset(&lp->hash_bytes, 0x00, 8);
1111
1112 hp100_stop_interface(dev);
1113
1114 hp100_hwinit(dev);
1115
1116 hp100_start_interface(dev); /* sets mac modes, enables interrupts */
1117
1118 return 0;
1119 }
1120
1121 /* The close function is called when the interface is to be brought down */
1122 static int hp100_close(struct net_device *dev)
1123 {
1124 int ioaddr = dev->base_addr;
1125 struct hp100_private *lp = netdev_priv(dev);
1126
1127 #ifdef HP100_DEBUG_B
1128 hp100_outw(0x4205, TRACE);
1129 printk("hp100: %s: close\n", dev->name);
1130 #endif
1131
1132 hp100_page(PERFORMANCE);
1133 hp100_outw(0xfefe, IRQ_MASK); /* mask off all IRQs */
1134
1135 hp100_stop_interface(dev);
1136
1137 if (lp->lan_type == HP100_LAN_100)
1138 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1139
1140 netif_stop_queue(dev);
1141
1142 free_irq(dev->irq, dev);
1143
1144 #ifdef HP100_DEBUG
1145 printk("hp100: %s: close LSW = 0x%x\n", dev->name,
1146 hp100_inw(OPTION_LSW));
1147 #endif
1148
1149 return 0;
1150 }
1151
1152
1153 /*
1154 * Configure the PDL Rx rings and LAN
1155 */
1156 static void hp100_init_pdls(struct net_device *dev)
1157 {
1158 struct hp100_private *lp = netdev_priv(dev);
1159 hp100_ring_t *ringptr;
1160 u_int *pageptr; /* Warning : increment by 4 - Jean II */
1161 int i;
1162
1163 #ifdef HP100_DEBUG_B
1164 int ioaddr = dev->base_addr;
1165 #endif
1166
1167 #ifdef HP100_DEBUG_B
1168 hp100_outw(0x4206, TRACE);
1169 printk("hp100: %s: init pdls\n", dev->name);
1170 #endif
1171
1172 if (!lp->page_vaddr_algn)
1173 printk("hp100: %s: Warning: lp->page_vaddr_algn not initialised!\n", dev->name);
1174 else {
1175 /* pageptr shall point into the DMA accessible memory region */
1176 /* we use this pointer to status the upper limit of allocated */
1177 /* memory in the allocated page. */
1178 /* note: align the pointers to the pci cache line size */
1179 memset(lp->page_vaddr_algn, 0, MAX_RINGSIZE); /* Zero Rx/Tx ring page */
1180 pageptr = lp->page_vaddr_algn;
1181
1182 lp->rxrcommit = 0;
1183 ringptr = lp->rxrhead = lp->rxrtail = &(lp->rxring[0]);
1184
1185 /* Initialise Rx Ring */
1186 for (i = MAX_RX_PDL - 1; i >= 0; i--) {
1187 lp->rxring[i].next = ringptr;
1188 ringptr = &(lp->rxring[i]);
1189 pageptr += hp100_init_rxpdl(dev, ringptr, pageptr);
1190 }
1191
1192 /* Initialise Tx Ring */
1193 lp->txrcommit = 0;
1194 ringptr = lp->txrhead = lp->txrtail = &(lp->txring[0]);
1195 for (i = MAX_TX_PDL - 1; i >= 0; i--) {
1196 lp->txring[i].next = ringptr;
1197 ringptr = &(lp->txring[i]);
1198 pageptr += hp100_init_txpdl(dev, ringptr, pageptr);
1199 }
1200 }
1201 }
1202
1203
1204 /* These functions "format" the entries in the pdl structure */
1205 /* They return how much memory the fragments need. */
1206 static int hp100_init_rxpdl(struct net_device *dev,
1207 register hp100_ring_t * ringptr,
1208 register u32 * pdlptr)
1209 {
1210 /* pdlptr is starting address for this pdl */
1211
1212 if (0 != (((unsigned long) pdlptr) & 0xf))
1213 printk("hp100: %s: Init rxpdl: Unaligned pdlptr 0x%lx.\n",
1214 dev->name, (unsigned long) pdlptr);
1215
1216 ringptr->pdl = pdlptr + 1;
1217 ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr + 1);
1218 ringptr->skb = (void *) NULL;
1219
1220 /*
1221 * Write address and length of first PDL Fragment (which is used for
1222 * storing the RX-Header
1223 * We use the 4 bytes _before_ the PDH in the pdl memory area to
1224 * store this information. (PDH is at offset 0x04)
1225 */
1226 /* Note that pdlptr+1 and not pdlptr is the pointer to the PDH */
1227
1228 *(pdlptr + 2) = (u_int) virt_to_whatever(dev, pdlptr); /* Address Frag 1 */
1229 *(pdlptr + 3) = 4; /* Length Frag 1 */
1230
1231 return roundup(MAX_RX_FRAG * 2 + 2, 4);
1232 }
1233
1234
1235 static int hp100_init_txpdl(struct net_device *dev,
1236 register hp100_ring_t * ringptr,
1237 register u32 * pdlptr)
1238 {
1239 if (0 != (((unsigned long) pdlptr) & 0xf))
1240 printk("hp100: %s: Init txpdl: Unaligned pdlptr 0x%lx.\n", dev->name, (unsigned long) pdlptr);
1241
1242 ringptr->pdl = pdlptr; /* +1; */
1243 ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr); /* +1 */
1244 ringptr->skb = (void *) NULL;
1245
1246 return roundup(MAX_TX_FRAG * 2 + 2, 4);
1247 }
1248
1249 /*
1250 * hp100_build_rx_pdl allocates an skb_buff of maximum size plus two bytes
1251 * for possible odd word alignment rounding up to next dword and set PDL
1252 * address for fragment#2
1253 * Returns: 0 if unable to allocate skb_buff
1254 * 1 if successful
1255 */
1256 static int hp100_build_rx_pdl(hp100_ring_t * ringptr,
1257 struct net_device *dev)
1258 {
1259 #ifdef HP100_DEBUG_B
1260 int ioaddr = dev->base_addr;
1261 #endif
1262 #ifdef HP100_DEBUG_BM
1263 u_int *p;
1264 #endif
1265
1266 #ifdef HP100_DEBUG_B
1267 hp100_outw(0x4207, TRACE);
1268 printk("hp100: %s: build rx pdl\n", dev->name);
1269 #endif
1270
1271 /* Allocate skb buffer of maximum size */
1272 /* Note: This depends on the alloc_skb functions allocating more
1273 * space than requested, i.e. aligning to 16bytes */
1274
1275 ringptr->skb = dev_alloc_skb(roundup(MAX_ETHER_SIZE + 2, 4));
1276
1277 if (NULL != ringptr->skb) {
1278 /*
1279 * Reserve 2 bytes at the head of the buffer to land the IP header
1280 * on a long word boundary (According to the Network Driver section
1281 * in the Linux KHG, this should help to increase performance.)
1282 */
1283 skb_reserve(ringptr->skb, 2);
1284
1285 ringptr->skb->dev = dev;
1286 ringptr->skb->data = (u_char *) skb_put(ringptr->skb, MAX_ETHER_SIZE);
1287
1288 /* ringptr->pdl points to the beginning of the PDL, i.e. the PDH */
1289 /* Note: 1st Fragment is used for the 4 byte packet status
1290 * (receive header). Its PDL entries are set up by init_rxpdl. So
1291 * here we only have to set up the PDL fragment entries for the data
1292 * part. Those 4 bytes will be stored in the DMA memory region
1293 * directly before the PDL.
1294 */
1295 #ifdef HP100_DEBUG_BM
1296 printk("hp100: %s: build_rx_pdl: PDH@0x%x, skb->data (len %d) at 0x%x\n",
1297 dev->name, (u_int) ringptr->pdl,
1298 roundup(MAX_ETHER_SIZE + 2, 4),
1299 (unsigned int) ringptr->skb->data);
1300 #endif
1301
1302 /* Conversion to new PCI API : map skbuf data to PCI bus.
1303 * Doc says it's OK for EISA as well - Jean II */
1304 ringptr->pdl[0] = 0x00020000; /* Write PDH */
1305 ringptr->pdl[3] = pdl_map_data(netdev_priv(dev),
1306 ringptr->skb->data);
1307 ringptr->pdl[4] = MAX_ETHER_SIZE; /* Length of Data */
1308
1309 #ifdef HP100_DEBUG_BM
1310 for (p = (ringptr->pdl); p < (ringptr->pdl + 5); p++)
1311 printk("hp100: %s: Adr 0x%.8x = 0x%.8x\n", dev->name, (u_int) p, (u_int) * p);
1312 #endif
1313 return (1);
1314 }
1315 /* else: */
1316 /* alloc_skb failed (no memory) -> still can receive the header
1317 * fragment into PDL memory. make PDL safe by clearing msgptr and
1318 * making the PDL only 1 fragment (i.e. the 4 byte packet status)
1319 */
1320 #ifdef HP100_DEBUG_BM
1321 printk("hp100: %s: build_rx_pdl: PDH@0x%x, No space for skb.\n", dev->name, (u_int) ringptr->pdl);
1322 #endif
1323
1324 ringptr->pdl[0] = 0x00010000; /* PDH: Count=1 Fragment */
1325
1326 return (0);
1327 }
1328
1329 /*
1330 * hp100_rxfill - attempt to fill the Rx Ring will empty skb's
1331 *
1332 * Makes assumption that skb's are always contiguous memory areas and
1333 * therefore PDLs contain only 2 physical fragments.
1334 * - While the number of Rx PDLs with buffers is less than maximum
1335 * a. Get a maximum packet size skb
1336 * b. Put the physical address of the buffer into the PDL.
1337 * c. Output physical address of PDL to adapter.
1338 */
1339 static void hp100_rxfill(struct net_device *dev)
1340 {
1341 int ioaddr = dev->base_addr;
1342
1343 struct hp100_private *lp = netdev_priv(dev);
1344 hp100_ring_t *ringptr;
1345
1346 #ifdef HP100_DEBUG_B
1347 hp100_outw(0x4208, TRACE);
1348 printk("hp100: %s: rxfill\n", dev->name);
1349 #endif
1350
1351 hp100_page(PERFORMANCE);
1352
1353 while (lp->rxrcommit < MAX_RX_PDL) {
1354 /*
1355 ** Attempt to get a buffer and build a Rx PDL.
1356 */
1357 ringptr = lp->rxrtail;
1358 if (0 == hp100_build_rx_pdl(ringptr, dev)) {
1359 return; /* None available, return */
1360 }
1361
1362 /* Hand this PDL over to the card */
1363 /* Note: This needs performance page selected! */
1364 #ifdef HP100_DEBUG_BM
1365 printk("hp100: %s: rxfill: Hand to card: pdl #%d @0x%x phys:0x%x, buffer: 0x%x\n",
1366 dev->name, lp->rxrcommit, (u_int) ringptr->pdl,
1367 (u_int) ringptr->pdl_paddr, (u_int) ringptr->pdl[3]);
1368 #endif
1369
1370 hp100_outl((u32) ringptr->pdl_paddr, RX_PDA);
1371
1372 lp->rxrcommit += 1;
1373 lp->rxrtail = ringptr->next;
1374 }
1375 }
1376
1377 /*
1378 * BM_shutdown - shutdown bus mastering and leave chip in reset state
1379 */
1380
1381 static void hp100_BM_shutdown(struct net_device *dev)
1382 {
1383 int ioaddr = dev->base_addr;
1384 struct hp100_private *lp = netdev_priv(dev);
1385 unsigned long time;
1386
1387 #ifdef HP100_DEBUG_B
1388 hp100_outw(0x4209, TRACE);
1389 printk("hp100: %s: bm shutdown\n", dev->name);
1390 #endif
1391
1392 hp100_page(PERFORMANCE);
1393 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
1394 hp100_outw(0xffff, IRQ_STATUS); /* Ack all ints */
1395
1396 /* Ensure Interrupts are off */
1397 hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
1398
1399 /* Disable all MAC activity */
1400 hp100_page(MAC_CTRL);
1401 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1); /* stop rx/tx */
1402
1403 /* If cascade MMU is not already in reset */
1404 if (0 != (hp100_inw(OPTION_LSW) & HP100_HW_RST)) {
1405 /* Wait 1.3ms (10Mb max packet time) to ensure MAC is idle so
1406 * MMU pointers will not be reset out from underneath
1407 */
1408 hp100_page(MAC_CTRL);
1409 for (time = 0; time < 5000; time++) {
1410 if ((hp100_inb(MAC_CFG_1) & (HP100_TX_IDLE | HP100_RX_IDLE)) == (HP100_TX_IDLE | HP100_RX_IDLE))
1411 break;
1412 }
1413
1414 /* Shutdown algorithm depends on the generation of Cascade */
1415 if (lp->chip == HP100_CHIPID_LASSEN) { /* ETR shutdown/reset */
1416 /* Disable Busmaster mode and wait for bit to go to zero. */
1417 hp100_page(HW_MAP);
1418 hp100_andb(~HP100_BM_MASTER, BM);
1419 /* 100 ms timeout */
1420 for (time = 0; time < 32000; time++) {
1421 if (0 == (hp100_inb(BM) & HP100_BM_MASTER))
1422 break;
1423 }
1424 } else { /* Shasta or Rainier Shutdown/Reset */
1425 /* To ensure all bus master inloading activity has ceased,
1426 * wait for no Rx PDAs or no Rx packets on card.
1427 */
1428 hp100_page(PERFORMANCE);
1429 /* 100 ms timeout */
1430 for (time = 0; time < 10000; time++) {
1431 /* RX_PDL: PDLs not executed. */
1432 /* RX_PKT_CNT: RX'd packets on card. */
1433 if ((hp100_inb(RX_PDL) == 0) && (hp100_inb(RX_PKT_CNT) == 0))
1434 break;
1435 }
1436
1437 if (time >= 10000)
1438 printk("hp100: %s: BM shutdown error.\n", dev->name);
1439
1440 /* To ensure all bus master outloading activity has ceased,
1441 * wait until the Tx PDA count goes to zero or no more Tx space
1442 * available in the Tx region of the card.
1443 */
1444 /* 100 ms timeout */
1445 for (time = 0; time < 10000; time++) {
1446 if ((0 == hp100_inb(TX_PKT_CNT)) &&
1447 (0 != (hp100_inb(TX_MEM_FREE) & HP100_AUTO_COMPARE)))
1448 break;
1449 }
1450
1451 /* Disable Busmaster mode */
1452 hp100_page(HW_MAP);
1453 hp100_andb(~HP100_BM_MASTER, BM);
1454 } /* end of shutdown procedure for non-etr parts */
1455
1456 hp100_cascade_reset(dev, 1);
1457 }
1458 hp100_page(PERFORMANCE);
1459 /* hp100_outw( HP100_BM_READ | HP100_BM_WRITE | HP100_RESET_HB, OPTION_LSW ); */
1460 /* Busmaster mode should be shut down now. */
1461 }
1462
1463 static int hp100_check_lan(struct net_device *dev)
1464 {
1465 struct hp100_private *lp = netdev_priv(dev);
1466
1467 if (lp->lan_type < 0) { /* no LAN type detected yet? */
1468 hp100_stop_interface(dev);
1469 if ((lp->lan_type = hp100_sense_lan(dev)) < 0) {
1470 printk("hp100: %s: no connection found - check wire\n", dev->name);
1471 hp100_start_interface(dev); /* 10Mb/s RX packets maybe handled */
1472 return -EIO;
1473 }
1474 if (lp->lan_type == HP100_LAN_100)
1475 lp->hub_status = hp100_login_to_vg_hub(dev, 0); /* relogin */
1476 hp100_start_interface(dev);
1477 }
1478 return 0;
1479 }
1480
1481 /*
1482 * transmit functions
1483 */
1484
1485 /* tx function for busmaster mode */
1486 static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
1487 {
1488 unsigned long flags;
1489 int i, ok_flag;
1490 int ioaddr = dev->base_addr;
1491 struct hp100_private *lp = netdev_priv(dev);
1492 hp100_ring_t *ringptr;
1493
1494 #ifdef HP100_DEBUG_B
1495 hp100_outw(0x4210, TRACE);
1496 printk("hp100: %s: start_xmit_bm\n", dev->name);
1497 #endif
1498
1499 if (skb == NULL) {
1500 return 0;
1501 }
1502
1503 if (skb->len <= 0)
1504 return 0;
1505
1506 if (lp->chip == HP100_CHIPID_SHASTA && skb_padto(skb, ETH_ZLEN))
1507 return 0;
1508
1509 /* Get Tx ring tail pointer */
1510 if (lp->txrtail->next == lp->txrhead) {
1511 /* No memory. */
1512 #ifdef HP100_DEBUG
1513 printk("hp100: %s: start_xmit_bm: No TX PDL available.\n", dev->name);
1514 #endif
1515 /* not waited long enough since last tx? */
1516 if (time_before(jiffies, dev->trans_start + HZ))
1517 return -EAGAIN;
1518
1519 if (hp100_check_lan(dev))
1520 return -EIO;
1521
1522 if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) {
1523 /* we have a 100Mb/s adapter but it isn't connected to hub */
1524 printk("hp100: %s: login to 100Mb/s hub retry\n", dev->name);
1525 hp100_stop_interface(dev);
1526 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1527 hp100_start_interface(dev);
1528 } else {
1529 spin_lock_irqsave(&lp->lock, flags);
1530 hp100_ints_off(); /* Useful ? Jean II */
1531 i = hp100_sense_lan(dev);
1532 hp100_ints_on();
1533 spin_unlock_irqrestore(&lp->lock, flags);
1534 if (i == HP100_LAN_ERR)
1535 printk("hp100: %s: link down detected\n", dev->name);
1536 else if (lp->lan_type != i) { /* cable change! */
1537 /* it's very hard - all network settings must be changed!!! */
1538 printk("hp100: %s: cable change 10Mb/s <-> 100Mb/s detected\n", dev->name);
1539 lp->lan_type = i;
1540 hp100_stop_interface(dev);
1541 if (lp->lan_type == HP100_LAN_100)
1542 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1543 hp100_start_interface(dev);
1544 } else {
1545 printk("hp100: %s: interface reset\n", dev->name);
1546 hp100_stop_interface(dev);
1547 if (lp->lan_type == HP100_LAN_100)
1548 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1549 hp100_start_interface(dev);
1550 }
1551 }
1552
1553 dev->trans_start = jiffies;
1554 return -EAGAIN;
1555 }
1556
1557 /*
1558 * we have to turn int's off before modifying this, otherwise
1559 * a tx_pdl_cleanup could occur at the same time
1560 */
1561 spin_lock_irqsave(&lp->lock, flags);
1562 ringptr = lp->txrtail;
1563 lp->txrtail = ringptr->next;
1564
1565 /* Check whether packet has minimal packet size */
1566 ok_flag = skb->len >= HP100_MIN_PACKET_SIZE;
1567 i = ok_flag ? skb->len : HP100_MIN_PACKET_SIZE;
1568
1569 ringptr->skb = skb;
1570 ringptr->pdl[0] = ((1 << 16) | i); /* PDH: 1 Fragment & length */
1571 if (lp->chip == HP100_CHIPID_SHASTA) {
1572 /* TODO:Could someone who has the EISA card please check if this works? */
1573 ringptr->pdl[2] = i;
1574 } else { /* Lassen */
1575 /* In the PDL, don't use the padded size but the real packet size: */
1576 ringptr->pdl[2] = skb->len; /* 1st Frag: Length of frag */
1577 }
1578 /* Conversion to new PCI API : map skbuf data to PCI bus.
1579 * Doc says it's OK for EISA as well - Jean II */
1580 ringptr->pdl[1] = ((u32) pci_map_single(lp->pci_dev, skb->data, ringptr->pdl[2], PCI_DMA_TODEVICE)); /* 1st Frag: Adr. of data */
1581
1582 /* Hand this PDL to the card. */
1583 hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */
1584
1585 lp->txrcommit++;
1586 spin_unlock_irqrestore(&lp->lock, flags);
1587
1588 /* Update statistics */
1589 lp->stats.tx_packets++;
1590 lp->stats.tx_bytes += skb->len;
1591 dev->trans_start = jiffies;
1592
1593 return 0;
1594 }
1595
1596
1597 /* clean_txring checks if packets have been sent by the card by reading
1598 * the TX_PDL register from the performance page and comparing it to the
1599 * number of commited packets. It then frees the skb's of the packets that
1600 * obviously have been sent to the network.
1601 *
1602 * Needs the PERFORMANCE page selected.
1603 */
1604 static void hp100_clean_txring(struct net_device *dev)
1605 {
1606 struct hp100_private *lp = netdev_priv(dev);
1607 int ioaddr = dev->base_addr;
1608 int donecount;
1609
1610 #ifdef HP100_DEBUG_B
1611 hp100_outw(0x4211, TRACE);
1612 printk("hp100: %s: clean txring\n", dev->name);
1613 #endif
1614
1615 /* How many PDLs have been transmitted? */
1616 donecount = (lp->txrcommit) - hp100_inb(TX_PDL);
1617
1618 #ifdef HP100_DEBUG
1619 if (donecount > MAX_TX_PDL)
1620 printk("hp100: %s: Warning: More PDLs transmitted than commited to card???\n", dev->name);
1621 #endif
1622
1623 for (; 0 != donecount; donecount--) {
1624 #ifdef HP100_DEBUG_BM
1625 printk("hp100: %s: Free skb: data @0x%.8x txrcommit=0x%x TXPDL=0x%x, done=0x%x\n",
1626 dev->name, (u_int) lp->txrhead->skb->data,
1627 lp->txrcommit, hp100_inb(TX_PDL), donecount);
1628 #endif
1629 /* Conversion to new PCI API : NOP */
1630 pci_unmap_single(lp->pci_dev, (dma_addr_t) lp->txrhead->pdl[1], lp->txrhead->pdl[2], PCI_DMA_TODEVICE);
1631 dev_kfree_skb_any(lp->txrhead->skb);
1632 lp->txrhead->skb = (void *) NULL;
1633 lp->txrhead = lp->txrhead->next;
1634 lp->txrcommit--;
1635 }
1636 }
1637
1638 /* tx function for slave modes */
1639 static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev)
1640 {
1641 unsigned long flags;
1642 int i, ok_flag;
1643 int ioaddr = dev->base_addr;
1644 u_short val;
1645 struct hp100_private *lp = netdev_priv(dev);
1646
1647 #ifdef HP100_DEBUG_B
1648 hp100_outw(0x4212, TRACE);
1649 printk("hp100: %s: start_xmit\n", dev->name);
1650 #endif
1651
1652 if (skb == NULL) {
1653 return 0;
1654 }
1655
1656 if (skb->len <= 0)
1657 return 0;
1658
1659 if (hp100_check_lan(dev))
1660 return -EIO;
1661
1662 /* If there is not enough free memory on the card... */
1663 i = hp100_inl(TX_MEM_FREE) & 0x7fffffff;
1664 if (!(((i / 2) - 539) > (skb->len + 16) && (hp100_inb(TX_PKT_CNT) < 255))) {
1665 #ifdef HP100_DEBUG
1666 printk("hp100: %s: start_xmit: tx free mem = 0x%x\n", dev->name, i);
1667 #endif
1668 /* not waited long enough since last failed tx try? */
1669 if (time_before(jiffies, dev->trans_start + HZ)) {
1670 #ifdef HP100_DEBUG
1671 printk("hp100: %s: trans_start timing problem\n",
1672 dev->name);
1673 #endif
1674 return -EAGAIN;
1675 }
1676 if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) {
1677 /* we have a 100Mb/s adapter but it isn't connected to hub */
1678 printk("hp100: %s: login to 100Mb/s hub retry\n", dev->name);
1679 hp100_stop_interface(dev);
1680 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1681 hp100_start_interface(dev);
1682 } else {
1683 spin_lock_irqsave(&lp->lock, flags);
1684 hp100_ints_off(); /* Useful ? Jean II */
1685 i = hp100_sense_lan(dev);
1686 hp100_ints_on();
1687 spin_unlock_irqrestore(&lp->lock, flags);
1688 if (i == HP100_LAN_ERR)
1689 printk("hp100: %s: link down detected\n", dev->name);
1690 else if (lp->lan_type != i) { /* cable change! */
1691 /* it's very hard - all network setting must be changed!!! */
1692 printk("hp100: %s: cable change 10Mb/s <-> 100Mb/s detected\n", dev->name);
1693 lp->lan_type = i;
1694 hp100_stop_interface(dev);
1695 if (lp->lan_type == HP100_LAN_100)
1696 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1697 hp100_start_interface(dev);
1698 } else {
1699 printk("hp100: %s: interface reset\n", dev->name);
1700 hp100_stop_interface(dev);
1701 if (lp->lan_type == HP100_LAN_100)
1702 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1703 hp100_start_interface(dev);
1704 mdelay(1);
1705 }
1706 }
1707 dev->trans_start = jiffies;
1708 return -EAGAIN;
1709 }
1710
1711 for (i = 0; i < 6000 && (hp100_inb(OPTION_MSW) & HP100_TX_CMD); i++) {
1712 #ifdef HP100_DEBUG_TX
1713 printk("hp100: %s: start_xmit: busy\n", dev->name);
1714 #endif
1715 }
1716
1717 spin_lock_irqsave(&lp->lock, flags);
1718 hp100_ints_off();
1719 val = hp100_inw(IRQ_STATUS);
1720 /* Ack / clear the interrupt TX_COMPLETE interrupt - this interrupt is set
1721 * when the current packet being transmitted on the wire is completed. */
1722 hp100_outw(HP100_TX_COMPLETE, IRQ_STATUS);
1723 #ifdef HP100_DEBUG_TX
1724 printk("hp100: %s: start_xmit: irq_status=0x%.4x, irqmask=0x%.4x, len=%d\n",
1725 dev->name, val, hp100_inw(IRQ_MASK), (int) skb->len);
1726 #endif
1727
1728 ok_flag = skb->len >= HP100_MIN_PACKET_SIZE;
1729 i = ok_flag ? skb->len : HP100_MIN_PACKET_SIZE;
1730
1731 hp100_outw(i, DATA32); /* tell card the total packet length */
1732 hp100_outw(i, FRAGMENT_LEN); /* and first/only fragment length */
1733
1734 if (lp->mode == 2) { /* memory mapped */
1735 /* Note: The J2585B needs alignment to 32bits here! */
1736 memcpy_toio(lp->mem_ptr_virt, skb->data, (skb->len + 3) & ~3);
1737 if (!ok_flag)
1738 memset_io(lp->mem_ptr_virt, 0, HP100_MIN_PACKET_SIZE - skb->len);
1739 } else { /* programmed i/o */
1740 outsl(ioaddr + HP100_REG_DATA32, skb->data,
1741 (skb->len + 3) >> 2);
1742 if (!ok_flag)
1743 for (i = (skb->len + 3) & ~3; i < HP100_MIN_PACKET_SIZE; i += 4)
1744 hp100_outl(0, DATA32);
1745 }
1746
1747 hp100_outb(HP100_TX_CMD | HP100_SET_LB, OPTION_MSW); /* send packet */
1748
1749 lp->stats.tx_packets++;
1750 lp->stats.tx_bytes += skb->len;
1751 dev->trans_start = jiffies;
1752 hp100_ints_on();
1753 spin_unlock_irqrestore(&lp->lock, flags);
1754
1755 dev_kfree_skb_any(skb);
1756
1757 #ifdef HP100_DEBUG_TX
1758 printk("hp100: %s: start_xmit: end\n", dev->name);
1759 #endif
1760
1761 return 0;
1762 }
1763
1764
1765 /*
1766 * Receive Function (Non-Busmaster mode)
1767 * Called when an "Receive Packet" interrupt occurs, i.e. the receive
1768 * packet counter is non-zero.
1769 * For non-busmaster, this function does the whole work of transfering
1770 * the packet to the host memory and then up to higher layers via skb
1771 * and netif_rx.
1772 */
1773
1774 static void hp100_rx(struct net_device *dev)
1775 {
1776 int packets, pkt_len;
1777 int ioaddr = dev->base_addr;
1778 struct hp100_private *lp = netdev_priv(dev);
1779 u_int header;
1780 struct sk_buff *skb;
1781
1782 #ifdef DEBUG_B
1783 hp100_outw(0x4213, TRACE);
1784 printk("hp100: %s: rx\n", dev->name);
1785 #endif
1786
1787 /* First get indication of received lan packet */
1788 /* RX_PKT_CND indicates the number of packets which have been fully */
1789 /* received onto the card but have not been fully transferred of the card */
1790 packets = hp100_inb(RX_PKT_CNT);
1791 #ifdef HP100_DEBUG_RX
1792 if (packets > 1)
1793 printk("hp100: %s: rx: waiting packets = %d\n", dev->name, packets);
1794 #endif
1795
1796 while (packets-- > 0) {
1797 /* If ADV_NXT_PKT is still set, we have to wait until the card has */
1798 /* really advanced to the next packet. */
1799 for (pkt_len = 0; pkt_len < 6000 && (hp100_inb(OPTION_MSW) & HP100_ADV_NXT_PKT); pkt_len++) {
1800 #ifdef HP100_DEBUG_RX
1801 printk ("hp100: %s: rx: busy, remaining packets = %d\n", dev->name, packets);
1802 #endif
1803 }
1804
1805 /* First we get the header, which contains information about the */
1806 /* actual length of the received packet. */
1807 if (lp->mode == 2) { /* memory mapped mode */
1808 header = readl(lp->mem_ptr_virt);
1809 } else /* programmed i/o */
1810 header = hp100_inl(DATA32);
1811
1812 pkt_len = ((header & HP100_PKT_LEN_MASK) + 3) & ~3;
1813
1814 #ifdef HP100_DEBUG_RX
1815 printk("hp100: %s: rx: new packet - length=%d, errors=0x%x, dest=0x%x\n",
1816 dev->name, header & HP100_PKT_LEN_MASK,
1817 (header >> 16) & 0xfff8, (header >> 16) & 7);
1818 #endif
1819
1820 /* Now we allocate the skb and transfer the data into it. */
1821 skb = dev_alloc_skb(pkt_len+2);
1822 if (skb == NULL) { /* Not enough memory->drop packet */
1823 #ifdef HP100_DEBUG
1824 printk("hp100: %s: rx: couldn't allocate a sk_buff of size %d\n",
1825 dev->name, pkt_len);
1826 #endif
1827 lp->stats.rx_dropped++;
1828 } else { /* skb successfully allocated */
1829
1830 u_char *ptr;
1831
1832 skb_reserve(skb,2);
1833
1834 /* ptr to start of the sk_buff data area */
1835 skb_put(skb, pkt_len);
1836 ptr = skb->data;
1837
1838 /* Now transfer the data from the card into that area */
1839 if (lp->mode == 2)
1840 memcpy_fromio(ptr, lp->mem_ptr_virt,pkt_len);
1841 else /* io mapped */
1842 insl(ioaddr + HP100_REG_DATA32, ptr, pkt_len >> 2);
1843
1844 skb->protocol = eth_type_trans(skb, dev);
1845
1846 #ifdef HP100_DEBUG_RX
1847 printk("hp100: %s: rx: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
1848 dev->name, ptr[0], ptr[1], ptr[2], ptr[3],
1849 ptr[4], ptr[5], ptr[6], ptr[7], ptr[8],
1850 ptr[9], ptr[10], ptr[11]);
1851 #endif
1852 netif_rx(skb);
1853 lp->stats.rx_packets++;
1854 lp->stats.rx_bytes += pkt_len;
1855 }
1856
1857 /* Indicate the card that we have got the packet */
1858 hp100_outb(HP100_ADV_NXT_PKT | HP100_SET_LB, OPTION_MSW);
1859
1860 switch (header & 0x00070000) {
1861 case (HP100_MULTI_ADDR_HASH << 16):
1862 case (HP100_MULTI_ADDR_NO_HASH << 16):
1863 lp->stats.multicast++;
1864 break;
1865 }
1866 } /* end of while(there are packets) loop */
1867 #ifdef HP100_DEBUG_RX
1868 printk("hp100_rx: %s: end\n", dev->name);
1869 #endif
1870 }
1871
1872 /*
1873 * Receive Function for Busmaster Mode
1874 */
1875 static void hp100_rx_bm(struct net_device *dev)
1876 {
1877 int ioaddr = dev->base_addr;
1878 struct hp100_private *lp = netdev_priv(dev);
1879 hp100_ring_t *ptr;
1880 u_int header;
1881 int pkt_len;
1882
1883 #ifdef HP100_DEBUG_B
1884 hp100_outw(0x4214, TRACE);
1885 printk("hp100: %s: rx_bm\n", dev->name);
1886 #endif
1887
1888 #ifdef HP100_DEBUG
1889 if (0 == lp->rxrcommit) {
1890 printk("hp100: %s: rx_bm called although no PDLs were committed to adapter?\n", dev->name);
1891 return;
1892 } else
1893 /* RX_PKT_CNT states how many PDLs are currently formatted and available to
1894 * the cards BM engine */
1895 if ((hp100_inw(RX_PKT_CNT) & 0x00ff) >= lp->rxrcommit) {
1896 printk("hp100: %s: More packets received than commited? RX_PKT_CNT=0x%x, commit=0x%x\n",
1897 dev->name, hp100_inw(RX_PKT_CNT) & 0x00ff,
1898 lp->rxrcommit);
1899 return;
1900 }
1901 #endif
1902
1903 while ((lp->rxrcommit > hp100_inb(RX_PDL))) {
1904 /*
1905 * The packet was received into the pdl pointed to by lp->rxrhead (
1906 * the oldest pdl in the ring
1907 */
1908
1909 /* First we get the header, which contains information about the */
1910 /* actual length of the received packet. */
1911
1912 ptr = lp->rxrhead;
1913
1914 header = *(ptr->pdl - 1);
1915 pkt_len = (header & HP100_PKT_LEN_MASK);
1916
1917 /* Conversion to new PCI API : NOP */
1918 pci_unmap_single(lp->pci_dev, (dma_addr_t) ptr->pdl[3], MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE);
1919
1920 #ifdef HP100_DEBUG_BM
1921 printk("hp100: %s: rx_bm: header@0x%x=0x%x length=%d, errors=0x%x, dest=0x%x\n",
1922 dev->name, (u_int) (ptr->pdl - 1), (u_int) header,
1923 pkt_len, (header >> 16) & 0xfff8, (header >> 16) & 7);
1924 printk("hp100: %s: RX_PDL_COUNT:0x%x TX_PDL_COUNT:0x%x, RX_PKT_CNT=0x%x PDH=0x%x, Data@0x%x len=0x%x\n",
1925 dev->name, hp100_inb(RX_PDL), hp100_inb(TX_PDL),
1926 hp100_inb(RX_PKT_CNT), (u_int) * (ptr->pdl),
1927 (u_int) * (ptr->pdl + 3), (u_int) * (ptr->pdl + 4));
1928 #endif
1929
1930 if ((pkt_len >= MIN_ETHER_SIZE) &&
1931 (pkt_len <= MAX_ETHER_SIZE)) {
1932 if (ptr->skb == NULL) {
1933 printk("hp100: %s: rx_bm: skb null\n", dev->name);
1934 /* can happen if we only allocated room for the pdh due to memory shortage. */
1935 lp->stats.rx_dropped++;
1936 } else {
1937 skb_trim(ptr->skb, pkt_len); /* Shorten it */
1938 ptr->skb->protocol =
1939 eth_type_trans(ptr->skb, dev);
1940
1941 netif_rx(ptr->skb); /* Up and away... */
1942
1943 lp->stats.rx_packets++;
1944 lp->stats.rx_bytes += pkt_len;
1945 }
1946
1947 switch (header & 0x00070000) {
1948 case (HP100_MULTI_ADDR_HASH << 16):
1949 case (HP100_MULTI_ADDR_NO_HASH << 16):
1950 lp->stats.multicast++;
1951 break;
1952 }
1953 } else {
1954 #ifdef HP100_DEBUG
1955 printk("hp100: %s: rx_bm: Received bad packet (length=%d)\n", dev->name, pkt_len);
1956 #endif
1957 if (ptr->skb != NULL)
1958 dev_kfree_skb_any(ptr->skb);
1959 lp->stats.rx_errors++;
1960 }
1961
1962 lp->rxrhead = lp->rxrhead->next;
1963
1964 /* Allocate a new rx PDL (so lp->rxrcommit stays the same) */
1965 if (0 == hp100_build_rx_pdl(lp->rxrtail, dev)) {
1966 /* No space for skb, header can still be received. */
1967 #ifdef HP100_DEBUG
1968 printk("hp100: %s: rx_bm: No space for new PDL.\n", dev->name);
1969 #endif
1970 return;
1971 } else { /* successfully allocated new PDL - put it in ringlist at tail. */
1972 hp100_outl((u32) lp->rxrtail->pdl_paddr, RX_PDA);
1973 lp->rxrtail = lp->rxrtail->next;
1974 }
1975
1976 }
1977 }
1978
1979 /*
1980 * statistics
1981 */
1982 static struct net_device_stats *hp100_get_stats(struct net_device *dev)
1983 {
1984 unsigned long flags;
1985 int ioaddr = dev->base_addr;
1986 struct hp100_private *lp = netdev_priv(dev);
1987
1988 #ifdef HP100_DEBUG_B
1989 hp100_outw(0x4215, TRACE);
1990 #endif
1991
1992 spin_lock_irqsave(&lp->lock, flags);
1993 hp100_ints_off(); /* Useful ? Jean II */
1994 hp100_update_stats(dev);
1995 hp100_ints_on();
1996 spin_unlock_irqrestore(&lp->lock, flags);
1997 return &(lp->stats);
1998 }
1999
2000 static void hp100_update_stats(struct net_device *dev)
2001 {
2002 int ioaddr = dev->base_addr;
2003 u_short val;
2004 struct hp100_private *lp = netdev_priv(dev);
2005
2006 #ifdef HP100_DEBUG_B
2007 hp100_outw(0x4216, TRACE);
2008 printk("hp100: %s: update-stats\n", dev->name);
2009 #endif
2010
2011 /* Note: Statistics counters clear when read. */
2012 hp100_page(MAC_CTRL);
2013 val = hp100_inw(DROPPED) & 0x0fff;
2014 lp->stats.rx_errors += val;
2015 lp->stats.rx_over_errors += val;
2016 val = hp100_inb(CRC);
2017 lp->stats.rx_errors += val;
2018 lp->stats.rx_crc_errors += val;
2019 val = hp100_inb(ABORT);
2020 lp->stats.tx_errors += val;
2021 lp->stats.tx_aborted_errors += val;
2022 hp100_page(PERFORMANCE);
2023 }
2024
2025 static void hp100_misc_interrupt(struct net_device *dev)
2026 {
2027 #ifdef HP100_DEBUG_B
2028 int ioaddr = dev->base_addr;
2029 #endif
2030 struct hp100_private *lp = netdev_priv(dev);
2031
2032 #ifdef HP100_DEBUG_B
2033 int ioaddr = dev->base_addr;
2034 hp100_outw(0x4216, TRACE);
2035 printk("hp100: %s: misc_interrupt\n", dev->name);
2036 #endif
2037
2038 /* Note: Statistics counters clear when read. */
2039 lp->stats.rx_errors++;
2040 lp->stats.tx_errors++;
2041 }
2042
2043 static void hp100_clear_stats(struct hp100_private *lp, int ioaddr)
2044 {
2045 unsigned long flags;
2046
2047 #ifdef HP100_DEBUG_B
2048 hp100_outw(0x4217, TRACE);
2049 printk("hp100: %s: clear_stats\n", dev->name);
2050 #endif
2051
2052 spin_lock_irqsave(&lp->lock, flags);
2053 hp100_page(MAC_CTRL); /* get all statistics bytes */
2054 hp100_inw(DROPPED);
2055 hp100_inb(CRC);
2056 hp100_inb(ABORT);
2057 hp100_page(PERFORMANCE);
2058 spin_unlock_irqrestore(&lp->lock, flags);
2059 }
2060
2061
2062 /*
2063 * multicast setup
2064 */
2065
2066 /*
2067 * Set or clear the multicast filter for this adapter.
2068 */
2069
2070 static void hp100_set_multicast_list(struct net_device *dev)
2071 {
2072 unsigned long flags;
2073 int ioaddr = dev->base_addr;
2074 struct hp100_private *lp = netdev_priv(dev);
2075
2076 #ifdef HP100_DEBUG_B
2077 hp100_outw(0x4218, TRACE);
2078 printk("hp100: %s: set_mc_list\n", dev->name);
2079 #endif
2080
2081 spin_lock_irqsave(&lp->lock, flags);
2082 hp100_ints_off();
2083 hp100_page(MAC_CTRL);
2084 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1); /* stop rx/tx */
2085
2086 if (dev->flags & IFF_PROMISC) {
2087 lp->mac2_mode = HP100_MAC2MODE6; /* promiscuous mode = get all good */
2088 lp->mac1_mode = HP100_MAC1MODE6; /* packets on the net */
2089 memset(&lp->hash_bytes, 0xff, 8);
2090 } else if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) {
2091 lp->mac2_mode = HP100_MAC2MODE5; /* multicast mode = get packets for */
2092 lp->mac1_mode = HP100_MAC1MODE5; /* me, broadcasts and all multicasts */
2093 #ifdef HP100_MULTICAST_FILTER /* doesn't work!!! */
2094 if (dev->flags & IFF_ALLMULTI) {
2095 /* set hash filter to receive all multicast packets */
2096 memset(&lp->hash_bytes, 0xff, 8);
2097 } else {
2098 int i, j, idx;
2099 u_char *addrs;
2100 struct dev_mc_list *dmi;
2101
2102 memset(&lp->hash_bytes, 0x00, 8);
2103 #ifdef HP100_DEBUG
2104 printk("hp100: %s: computing hash filter - mc_count = %i\n", dev->name, dev->mc_count);
2105 #endif
2106 for (i = 0, dmi = dev->mc_list; i < dev->mc_count; i++, dmi = dmi->next) {
2107 addrs = dmi->dmi_addr;
2108 if ((*addrs & 0x01) == 0x01) { /* multicast address? */
2109 #ifdef HP100_DEBUG
2110 printk("hp100: %s: multicast = %pM, ",
2111 dev->name, addrs);
2112 #endif
2113 for (j = idx = 0; j < 6; j++) {
2114 idx ^= *addrs++ & 0x3f;
2115 printk(":%02x:", idx);
2116 }
2117 #ifdef HP100_DEBUG
2118 printk("idx = %i\n", idx);
2119 #endif
2120 lp->hash_bytes[idx >> 3] |= (1 << (idx & 7));
2121 }
2122 }
2123 }
2124 #else
2125 memset(&lp->hash_bytes, 0xff, 8);
2126 #endif
2127 } else {
2128 lp->mac2_mode = HP100_MAC2MODE3; /* normal mode = get packets for me */
2129 lp->mac1_mode = HP100_MAC1MODE3; /* and broadcasts */
2130 memset(&lp->hash_bytes, 0x00, 8);
2131 }
2132
2133 if (((hp100_inb(MAC_CFG_1) & 0x0f) != lp->mac1_mode) ||
2134 (hp100_inb(MAC_CFG_2) != lp->mac2_mode)) {
2135 int i;
2136
2137 hp100_outb(lp->mac2_mode, MAC_CFG_2);
2138 hp100_andb(HP100_MAC1MODEMASK, MAC_CFG_1); /* clear mac1 mode bits */
2139 hp100_orb(lp->mac1_mode, MAC_CFG_1); /* and set the new mode */
2140
2141 hp100_page(MAC_ADDRESS);
2142 for (i = 0; i < 8; i++)
2143 hp100_outb(lp->hash_bytes[i], HASH_BYTE0 + i);
2144 #ifdef HP100_DEBUG
2145 printk("hp100: %s: mac1 = 0x%x, mac2 = 0x%x, multicast hash = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
2146 dev->name, lp->mac1_mode, lp->mac2_mode,
2147 lp->hash_bytes[0], lp->hash_bytes[1],
2148 lp->hash_bytes[2], lp->hash_bytes[3],
2149 lp->hash_bytes[4], lp->hash_bytes[5],
2150 lp->hash_bytes[6], lp->hash_bytes[7]);
2151 #endif
2152
2153 if (lp->lan_type == HP100_LAN_100) {
2154 #ifdef HP100_DEBUG
2155 printk("hp100: %s: 100VG MAC settings have changed - relogin.\n", dev->name);
2156 #endif
2157 lp->hub_status = hp100_login_to_vg_hub(dev, 1); /* force a relogin to the hub */
2158 }
2159 } else {
2160 int i;
2161 u_char old_hash_bytes[8];
2162
2163 hp100_page(MAC_ADDRESS);
2164 for (i = 0; i < 8; i++)
2165 old_hash_bytes[i] = hp100_inb(HASH_BYTE0 + i);
2166 if (memcmp(old_hash_bytes, &lp->hash_bytes, 8)) {
2167 for (i = 0; i < 8; i++)
2168 hp100_outb(lp->hash_bytes[i], HASH_BYTE0 + i);
2169 #ifdef HP100_DEBUG
2170 printk("hp100: %s: multicast hash = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
2171 dev->name, lp->hash_bytes[0],
2172 lp->hash_bytes[1], lp->hash_bytes[2],
2173 lp->hash_bytes[3], lp->hash_bytes[4],
2174 lp->hash_bytes[5], lp->hash_bytes[6],
2175 lp->hash_bytes[7]);
2176 #endif
2177
2178 if (lp->lan_type == HP100_LAN_100) {
2179 #ifdef HP100_DEBUG
2180 printk("hp100: %s: 100VG MAC settings have changed - relogin.\n", dev->name);
2181 #endif
2182 lp->hub_status = hp100_login_to_vg_hub(dev, 1); /* force a relogin to the hub */
2183 }
2184 }
2185 }
2186
2187 hp100_page(MAC_CTRL);
2188 hp100_orb(HP100_RX_EN | HP100_RX_IDLE | /* enable rx */
2189 HP100_TX_EN | HP100_TX_IDLE, MAC_CFG_1); /* enable tx */
2190
2191 hp100_page(PERFORMANCE);
2192 hp100_ints_on();
2193 spin_unlock_irqrestore(&lp->lock, flags);
2194 }
2195
2196 /*
2197 * hardware interrupt handling
2198 */
2199
2200 static irqreturn_t hp100_interrupt(int irq, void *dev_id)
2201 {
2202 struct net_device *dev = (struct net_device *) dev_id;
2203 struct hp100_private *lp = netdev_priv(dev);
2204
2205 int ioaddr;
2206 u_int val;
2207
2208 if (dev == NULL)
2209 return IRQ_NONE;
2210 ioaddr = dev->base_addr;
2211
2212 spin_lock(&lp->lock);
2213
2214 hp100_ints_off();
2215
2216 #ifdef HP100_DEBUG_B
2217 hp100_outw(0x4219, TRACE);
2218 #endif
2219
2220 /* hp100_page( PERFORMANCE ); */
2221 val = hp100_inw(IRQ_STATUS);
2222 #ifdef HP100_DEBUG_IRQ
2223 printk("hp100: %s: mode=%x,IRQ_STAT=0x%.4x,RXPKTCNT=0x%.2x RXPDL=0x%.2x TXPKTCNT=0x%.2x TXPDL=0x%.2x\n",
2224 dev->name, lp->mode, (u_int) val, hp100_inb(RX_PKT_CNT),
2225 hp100_inb(RX_PDL), hp100_inb(TX_PKT_CNT), hp100_inb(TX_PDL));
2226 #endif
2227
2228 if (val == 0) { /* might be a shared interrupt */
2229 spin_unlock(&lp->lock);
2230 hp100_ints_on();
2231 return IRQ_NONE;
2232 }
2233 /* We're only interested in those interrupts we really enabled. */
2234 /* val &= hp100_inw( IRQ_MASK ); */
2235
2236 /*
2237 * RX_PDL_FILL_COMPL is set whenever a RX_PDL has been executed. A RX_PDL
2238 * is considered executed whenever the RX_PDL data structure is no longer
2239 * needed.
2240 */
2241 if (val & HP100_RX_PDL_FILL_COMPL) {
2242 if (lp->mode == 1)
2243 hp100_rx_bm(dev);
2244 else {
2245 printk("hp100: %s: rx_pdl_fill_compl interrupt although not busmaster?\n", dev->name);
2246 }
2247 }
2248
2249 /*
2250 * The RX_PACKET interrupt is set, when the receive packet counter is
2251 * non zero. We use this interrupt for receiving in slave mode. In
2252 * busmaster mode, we use it to make sure we did not miss any rx_pdl_fill
2253 * interrupts. If rx_pdl_fill_compl is not set and rx_packet is set, then
2254 * we somehow have missed a rx_pdl_fill_compl interrupt.
2255 */
2256
2257 if (val & HP100_RX_PACKET) { /* Receive Packet Counter is non zero */
2258 if (lp->mode != 1) /* non busmaster */
2259 hp100_rx(dev);
2260 else if (!(val & HP100_RX_PDL_FILL_COMPL)) {
2261 /* Shouldnt happen - maybe we missed a RX_PDL_FILL Interrupt? */
2262 hp100_rx_bm(dev);
2263 }
2264 }
2265
2266 /*
2267 * Ack. that we have noticed the interrupt and thereby allow next one.
2268 * Note that this is now done after the slave rx function, since first
2269 * acknowledging and then setting ADV_NXT_PKT caused an extra interrupt
2270 * on the J2573.
2271 */
2272 hp100_outw(val, IRQ_STATUS);
2273
2274 /*
2275 * RX_ERROR is set when a packet is dropped due to no memory resources on
2276 * the card or when a RCV_ERR occurs.
2277 * TX_ERROR is set when a TX_ABORT condition occurs in the MAC->exists
2278 * only in the 802.3 MAC and happens when 16 collisions occur during a TX
2279 */
2280 if (val & (HP100_TX_ERROR | HP100_RX_ERROR)) {
2281 #ifdef HP100_DEBUG_IRQ
2282 printk("hp100: %s: TX/RX Error IRQ\n", dev->name);
2283 #endif
2284 hp100_update_stats(dev);
2285 if (lp->mode == 1) {
2286 hp100_rxfill(dev);
2287 hp100_clean_txring(dev);
2288 }
2289 }
2290
2291 /*
2292 * RX_PDA_ZERO is set when the PDA count goes from non-zero to zero.
2293 */
2294 if ((lp->mode == 1) && (val & (HP100_RX_PDA_ZERO)))
2295 hp100_rxfill(dev);
2296
2297 /*
2298 * HP100_TX_COMPLETE interrupt occurs when packet transmitted on wire
2299 * is completed
2300 */
2301 if ((lp->mode == 1) && (val & (HP100_TX_COMPLETE)))
2302 hp100_clean_txring(dev);
2303
2304 /*
2305 * MISC_ERROR is set when either the LAN link goes down or a detected
2306 * bus error occurs.
2307 */
2308 if (val & HP100_MISC_ERROR) { /* New for J2585B */
2309 #ifdef HP100_DEBUG_IRQ
2310 printk
2311 ("hp100: %s: Misc. Error Interrupt - Check cabling.\n",
2312 dev->name);
2313 #endif
2314 if (lp->mode == 1) {
2315 hp100_clean_txring(dev);
2316 hp100_rxfill(dev);
2317 }
2318 hp100_misc_interrupt(dev);
2319 }
2320
2321 spin_unlock(&lp->lock);
2322 hp100_ints_on();
2323 return IRQ_HANDLED;
2324 }
2325
2326 /*
2327 * some misc functions
2328 */
2329
2330 static void hp100_start_interface(struct net_device *dev)
2331 {
2332 unsigned long flags;
2333 int ioaddr = dev->base_addr;
2334 struct hp100_private *lp = netdev_priv(dev);
2335
2336 #ifdef HP100_DEBUG_B
2337 hp100_outw(0x4220, TRACE);
2338 printk("hp100: %s: hp100_start_interface\n", dev->name);
2339 #endif
2340
2341 spin_lock_irqsave(&lp->lock, flags);
2342
2343 /* Ensure the adapter does not want to request an interrupt when */
2344 /* enabling the IRQ line to be active on the bus (i.e. not tri-stated) */
2345 hp100_page(PERFORMANCE);
2346 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
2347 hp100_outw(0xffff, IRQ_STATUS); /* ack all IRQs */
2348 hp100_outw(HP100_FAKE_INT | HP100_INT_EN | HP100_RESET_LB,
2349 OPTION_LSW);
2350 /* Un Tri-state int. TODO: Check if shared interrupts can be realised? */
2351 hp100_outw(HP100_TRI_INT | HP100_RESET_HB, OPTION_LSW);
2352
2353 if (lp->mode == 1) {
2354 /* Make sure BM bit is set... */
2355 hp100_page(HW_MAP);
2356 hp100_orb(HP100_BM_MASTER, BM);
2357 hp100_rxfill(dev);
2358 } else if (lp->mode == 2) {
2359 /* Enable memory mapping. Note: Don't do this when busmaster. */
2360 hp100_outw(HP100_MMAP_DIS | HP100_RESET_HB, OPTION_LSW);
2361 }
2362
2363 hp100_page(PERFORMANCE);
2364 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
2365 hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
2366
2367 /* enable a few interrupts: */
2368 if (lp->mode == 1) { /* busmaster mode */
2369 hp100_outw(HP100_RX_PDL_FILL_COMPL |
2370 HP100_RX_PDA_ZERO | HP100_RX_ERROR |
2371 /* HP100_RX_PACKET | */
2372 /* HP100_RX_EARLY_INT | */ HP100_SET_HB |
2373 /* HP100_TX_PDA_ZERO | */
2374 HP100_TX_COMPLETE |
2375 /* HP100_MISC_ERROR | */
2376 HP100_TX_ERROR | HP100_SET_LB, IRQ_MASK);
2377 } else {
2378 hp100_outw(HP100_RX_PACKET |
2379 HP100_RX_ERROR | HP100_SET_HB |
2380 HP100_TX_ERROR | HP100_SET_LB, IRQ_MASK);
2381 }
2382
2383 /* Note : before hp100_set_multicast_list(), because it will play with
2384 * spinlock itself... Jean II */
2385 spin_unlock_irqrestore(&lp->lock, flags);
2386
2387 /* Enable MAC Tx and RX, set MAC modes, ... */
2388 hp100_set_multicast_list(dev);
2389 }
2390
2391 static void hp100_stop_interface(struct net_device *dev)
2392 {
2393 struct hp100_private *lp = netdev_priv(dev);
2394 int ioaddr = dev->base_addr;
2395 u_int val;
2396
2397 #ifdef HP100_DEBUG_B
2398 printk("hp100: %s: hp100_stop_interface\n", dev->name);
2399 hp100_outw(0x4221, TRACE);
2400 #endif
2401
2402 if (lp->mode == 1)
2403 hp100_BM_shutdown(dev);
2404 else {
2405 /* Note: MMAP_DIS will be reenabled by start_interface */
2406 hp100_outw(HP100_INT_EN | HP100_RESET_LB |
2407 HP100_TRI_INT | HP100_MMAP_DIS | HP100_SET_HB,
2408 OPTION_LSW);
2409 val = hp100_inw(OPTION_LSW);
2410
2411 hp100_page(MAC_CTRL);
2412 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1);
2413
2414 if (!(val & HP100_HW_RST))
2415 return; /* If reset, imm. return ... */
2416 /* ... else: busy wait until idle */
2417 for (val = 0; val < 6000; val++)
2418 if ((hp100_inb(MAC_CFG_1) & (HP100_TX_IDLE | HP100_RX_IDLE)) == (HP100_TX_IDLE | HP100_RX_IDLE)) {
2419 hp100_page(PERFORMANCE);
2420 return;
2421 }
2422 printk("hp100: %s: hp100_stop_interface - timeout\n", dev->name);
2423 hp100_page(PERFORMANCE);
2424 }
2425 }
2426
2427 static void hp100_load_eeprom(struct net_device *dev, u_short probe_ioaddr)
2428 {
2429 int i;
2430 int ioaddr = probe_ioaddr > 0 ? probe_ioaddr : dev->base_addr;
2431
2432 #ifdef HP100_DEBUG_B
2433 hp100_outw(0x4222, TRACE);
2434 #endif
2435
2436 hp100_page(EEPROM_CTRL);
2437 hp100_andw(~HP100_EEPROM_LOAD, EEPROM_CTRL);
2438 hp100_orw(HP100_EEPROM_LOAD, EEPROM_CTRL);
2439 for (i = 0; i < 10000; i++)
2440 if (!(hp100_inb(OPTION_MSW) & HP100_EE_LOAD))
2441 return;
2442 printk("hp100: %s: hp100_load_eeprom - timeout\n", dev->name);
2443 }
2444
2445 /* Sense connection status.
2446 * return values: LAN_10 - Connected to 10Mbit/s network
2447 * LAN_100 - Connected to 100Mbit/s network
2448 * LAN_ERR - not connected or 100Mbit/s Hub down
2449 */
2450 static int hp100_sense_lan(struct net_device *dev)
2451 {
2452 int ioaddr = dev->base_addr;
2453 u_short val_VG, val_10;
2454 struct hp100_private *lp = netdev_priv(dev);
2455
2456 #ifdef HP100_DEBUG_B
2457 hp100_outw(0x4223, TRACE);
2458 #endif
2459
2460 hp100_page(MAC_CTRL);
2461 val_10 = hp100_inb(10_LAN_CFG_1);
2462 val_VG = hp100_inb(VG_LAN_CFG_1);
2463 hp100_page(PERFORMANCE);
2464 #ifdef HP100_DEBUG
2465 printk("hp100: %s: sense_lan: val_VG = 0x%04x, val_10 = 0x%04x\n",
2466 dev->name, val_VG, val_10);
2467 #endif
2468
2469 if (val_10 & HP100_LINK_BEAT_ST) /* 10Mb connection is active */
2470 return HP100_LAN_10;
2471
2472 if (val_10 & HP100_AUI_ST) { /* have we BNC or AUI onboard? */
2473 /*
2474 * This can be overriden by dos utility, so if this has no effect,
2475 * perhaps you need to download that utility from HP and set card
2476 * back to "auto detect".
2477 */
2478 val_10 |= HP100_AUI_SEL | HP100_LOW_TH;
2479 hp100_page(MAC_CTRL);
2480 hp100_outb(val_10, 10_LAN_CFG_1);
2481 hp100_page(PERFORMANCE);
2482 return HP100_LAN_COAX;
2483 }
2484
2485 /* Those cards don't have a 100 Mbit connector */
2486 if ( !strcmp(lp->id, "HWP1920") ||
2487 (lp->pci_dev &&
2488 lp->pci_dev->vendor == PCI_VENDOR_ID &&
2489 (lp->pci_dev->device == PCI_DEVICE_ID_HP_J2970A ||
2490 lp->pci_dev->device == PCI_DEVICE_ID_HP_J2973A)))
2491 return HP100_LAN_ERR;
2492
2493 if (val_VG & HP100_LINK_CABLE_ST) /* Can hear the HUBs tone. */
2494 return HP100_LAN_100;
2495 return HP100_LAN_ERR;
2496 }
2497
2498 static int hp100_down_vg_link(struct net_device *dev)
2499 {
2500 struct hp100_private *lp = netdev_priv(dev);
2501 int ioaddr = dev->base_addr;
2502 unsigned long time;
2503 long savelan, newlan;
2504
2505 #ifdef HP100_DEBUG_B
2506 hp100_outw(0x4224, TRACE);
2507 printk("hp100: %s: down_vg_link\n", dev->name);
2508 #endif
2509
2510 hp100_page(MAC_CTRL);
2511 time = jiffies + (HZ / 4);
2512 do {
2513 if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST)
2514 break;
2515 if (!in_interrupt())
2516 schedule_timeout_interruptible(1);
2517 } while (time_after(time, jiffies));
2518
2519 if (time_after_eq(jiffies, time)) /* no signal->no logout */
2520 return 0;
2521
2522 /* Drop the VG Link by clearing the link up cmd and load addr. */
2523
2524 hp100_andb(~(HP100_LOAD_ADDR | HP100_LINK_CMD), VG_LAN_CFG_1);
2525 hp100_orb(HP100_VG_SEL, VG_LAN_CFG_1);
2526
2527 /* Conditionally stall for >250ms on Link-Up Status (to go down) */
2528 time = jiffies + (HZ / 2);
2529 do {
2530 if (!(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
2531 break;
2532 if (!in_interrupt())
2533 schedule_timeout_interruptible(1);
2534 } while (time_after(time, jiffies));
2535
2536 #ifdef HP100_DEBUG
2537 if (time_after_eq(jiffies, time))
2538 printk("hp100: %s: down_vg_link: Link does not go down?\n", dev->name);
2539 #endif
2540
2541 /* To prevent condition where Rev 1 VG MAC and old hubs do not complete */
2542 /* logout under traffic (even though all the status bits are cleared), */
2543 /* do this workaround to get the Rev 1 MAC in its idle state */
2544 if (lp->chip == HP100_CHIPID_LASSEN) {
2545 /* Reset VG MAC to insure it leaves the logoff state even if */
2546 /* the Hub is still emitting tones */
2547 hp100_andb(~HP100_VG_RESET, VG_LAN_CFG_1);
2548 udelay(1500); /* wait for >1ms */
2549 hp100_orb(HP100_VG_RESET, VG_LAN_CFG_1); /* Release Reset */
2550 udelay(1500);
2551 }
2552
2553 /* New: For lassen, switch to 10 Mbps mac briefly to clear training ACK */
2554 /* to get the VG mac to full reset. This is not req.d with later chips */
2555 /* Note: It will take the between 1 and 2 seconds for the VG mac to be */
2556 /* selected again! This will be left to the connect hub function to */
2557 /* perform if desired. */
2558 if (lp->chip == HP100_CHIPID_LASSEN) {
2559 /* Have to write to 10 and 100VG control registers simultaneously */
2560 savelan = newlan = hp100_inl(10_LAN_CFG_1); /* read 10+100 LAN_CFG regs */
2561 newlan &= ~(HP100_VG_SEL << 16);
2562 newlan |= (HP100_DOT3_MAC) << 8;
2563 hp100_andb(~HP100_AUTO_MODE, MAC_CFG_3); /* Autosel off */
2564 hp100_outl(newlan, 10_LAN_CFG_1);
2565
2566 /* Conditionally stall for 5sec on VG selected. */
2567 time = jiffies + (HZ * 5);
2568 do {
2569 if (!(hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST))
2570 break;
2571 if (!in_interrupt())
2572 schedule_timeout_interruptible(1);
2573 } while (time_after(time, jiffies));
2574
2575 hp100_orb(HP100_AUTO_MODE, MAC_CFG_3); /* Autosel back on */
2576 hp100_outl(savelan, 10_LAN_CFG_1);
2577 }
2578
2579 time = jiffies + (3 * HZ); /* Timeout 3s */
2580 do {
2581 if ((hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) == 0)
2582 break;
2583 if (!in_interrupt())
2584 schedule_timeout_interruptible(1);
2585 } while (time_after(time, jiffies));
2586
2587 if (time_before_eq(time, jiffies)) {
2588 #ifdef HP100_DEBUG
2589 printk("hp100: %s: down_vg_link: timeout\n", dev->name);
2590 #endif
2591 return -EIO;
2592 }
2593
2594 time = jiffies + (2 * HZ); /* This seems to take a while.... */
2595 do {
2596 if (!in_interrupt())
2597 schedule_timeout_interruptible(1);
2598 } while (time_after(time, jiffies));
2599
2600 return 0;
2601 }
2602
2603 static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin)
2604 {
2605 int ioaddr = dev->base_addr;
2606 struct hp100_private *lp = netdev_priv(dev);
2607 u_short val = 0;
2608 unsigned long time;
2609 int startst;
2610
2611 #ifdef HP100_DEBUG_B
2612 hp100_outw(0x4225, TRACE);
2613 printk("hp100: %s: login_to_vg_hub\n", dev->name);
2614 #endif
2615
2616 /* Initiate a login sequence iff VG MAC is enabled and either Load Address
2617 * bit is zero or the force relogin flag is set (e.g. due to MAC address or
2618 * promiscuous mode change)
2619 */
2620 hp100_page(MAC_CTRL);
2621 startst = hp100_inb(VG_LAN_CFG_1);
2622 if ((force_relogin == 1) || (hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST)) {
2623 #ifdef HP100_DEBUG_TRAINING
2624 printk("hp100: %s: Start training\n", dev->name);
2625 #endif
2626
2627 /* Ensure VG Reset bit is 1 (i.e., do not reset) */
2628 hp100_orb(HP100_VG_RESET, VG_LAN_CFG_1);
2629
2630 /* If Lassen AND auto-select-mode AND VG tones were sensed on */
2631 /* entry then temporarily put them into force 100Mbit mode */
2632 if ((lp->chip == HP100_CHIPID_LASSEN) && (startst & HP100_LINK_CABLE_ST))
2633 hp100_andb(~HP100_DOT3_MAC, 10_LAN_CFG_2);
2634
2635 /* Drop the VG link by zeroing Link Up Command and Load Address */
2636 hp100_andb(~(HP100_LINK_CMD /* |HP100_LOAD_ADDR */ ), VG_LAN_CFG_1);
2637
2638 #ifdef HP100_DEBUG_TRAINING
2639 printk("hp100: %s: Bring down the link\n", dev->name);
2640 #endif
2641
2642 /* Wait for link to drop */
2643 time = jiffies + (HZ / 10);
2644 do {
2645 if (~(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
2646 break;
2647 if (!in_interrupt())
2648 schedule_timeout_interruptible(1);
2649 } while (time_after(time, jiffies));
2650
2651 /* Start an addressed training and optionally request promiscuous port */
2652 if ((dev->flags) & IFF_PROMISC) {
2653 hp100_orb(HP100_PROM_MODE, VG_LAN_CFG_2);
2654 if (lp->chip == HP100_CHIPID_LASSEN)
2655 hp100_orw(HP100_MACRQ_PROMSC, TRAIN_REQUEST);
2656 } else {
2657 hp100_andb(~HP100_PROM_MODE, VG_LAN_CFG_2);
2658 /* For ETR parts we need to reset the prom. bit in the training
2659 * register, otherwise promiscious mode won't be disabled.
2660 */
2661 if (lp->chip == HP100_CHIPID_LASSEN) {
2662 hp100_andw(~HP100_MACRQ_PROMSC, TRAIN_REQUEST);
2663 }
2664 }
2665
2666 /* With ETR parts, frame format request bits can be set. */
2667 if (lp->chip == HP100_CHIPID_LASSEN)
2668 hp100_orb(HP100_MACRQ_FRAMEFMT_EITHER, TRAIN_REQUEST);
2669
2670 hp100_orb(HP100_LINK_CMD | HP100_LOAD_ADDR | HP100_VG_RESET, VG_LAN_CFG_1);
2671
2672 /* Note: Next wait could be omitted for Hood and earlier chips under */
2673 /* certain circumstances */
2674 /* TODO: check if hood/earlier and skip wait. */
2675
2676 /* Wait for either short timeout for VG tones or long for login */
2677 /* Wait for the card hardware to signalise link cable status ok... */
2678 hp100_page(MAC_CTRL);
2679 time = jiffies + (1 * HZ); /* 1 sec timeout for cable st */
2680 do {
2681 if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST)
2682 break;
2683 if (!in_interrupt())
2684 schedule_timeout_interruptible(1);
2685 } while (time_before(jiffies, time));
2686
2687 if (time_after_eq(jiffies, time)) {
2688 #ifdef HP100_DEBUG_TRAINING
2689 printk("hp100: %s: Link cable status not ok? Training aborted.\n", dev->name);
2690 #endif
2691 } else {
2692 #ifdef HP100_DEBUG_TRAINING
2693 printk
2694 ("hp100: %s: HUB tones detected. Trying to train.\n",
2695 dev->name);
2696 #endif
2697
2698 time = jiffies + (2 * HZ); /* again a timeout */
2699 do {
2700 val = hp100_inb(VG_LAN_CFG_1);
2701 if ((val & (HP100_LINK_UP_ST))) {
2702 #ifdef HP100_DEBUG_TRAINING
2703 printk("hp100: %s: Passed training.\n", dev->name);
2704 #endif
2705 break;
2706 }
2707 if (!in_interrupt())
2708 schedule_timeout_interruptible(1);
2709 } while (time_after(time, jiffies));
2710 }
2711
2712 /* If LINK_UP_ST is set, then we are logged into the hub. */
2713 if (time_before_eq(jiffies, time) && (val & HP100_LINK_UP_ST)) {
2714 #ifdef HP100_DEBUG_TRAINING
2715 printk("hp100: %s: Successfully logged into the HUB.\n", dev->name);
2716 if (lp->chip == HP100_CHIPID_LASSEN) {
2717 val = hp100_inw(TRAIN_ALLOW);
2718 printk("hp100: %s: Card supports 100VG MAC Version \"%s\" ",
2719 dev->name, (hp100_inw(TRAIN_REQUEST) & HP100_CARD_MACVER) ? "802.12" : "Pre");
2720 printk("Driver will use MAC Version \"%s\"\n", (val & HP100_HUB_MACVER) ? "802.12" : "Pre");
2721 printk("hp100: %s: Frame format is %s.\n", dev->name, (val & HP100_MALLOW_FRAMEFMT) ? "802.5" : "802.3");
2722 }
2723 #endif
2724 } else {
2725 /* If LINK_UP_ST is not set, login was not successful */
2726 printk("hp100: %s: Problem logging into the HUB.\n", dev->name);
2727 if (lp->chip == HP100_CHIPID_LASSEN) {
2728 /* Check allowed Register to find out why there is a problem. */
2729 val = hp100_inw(TRAIN_ALLOW); /* won't work on non-ETR card */
2730 #ifdef HP100_DEBUG_TRAINING
2731 printk("hp100: %s: MAC Configuration requested: 0x%04x, HUB allowed: 0x%04x\n", dev->name, hp100_inw(TRAIN_REQUEST), val);
2732 #endif
2733 if (val & HP100_MALLOW_ACCDENIED)
2734 printk("hp100: %s: HUB access denied.\n", dev->name);
2735 if (val & HP100_MALLOW_CONFIGURE)
2736 printk("hp100: %s: MAC Configuration is incompatible with the Network.\n", dev->name);
2737 if (val & HP100_MALLOW_DUPADDR)
2738 printk("hp100: %s: Duplicate MAC Address on the Network.\n", dev->name);
2739 }
2740 }
2741
2742 /* If we have put the chip into forced 100 Mbit mode earlier, go back */
2743 /* to auto-select mode */
2744
2745 if ((lp->chip == HP100_CHIPID_LASSEN) && (startst & HP100_LINK_CABLE_ST)) {
2746 hp100_page(MAC_CTRL);
2747 hp100_orb(HP100_DOT3_MAC, 10_LAN_CFG_2);
2748 }
2749
2750 val = hp100_inb(VG_LAN_CFG_1);
2751
2752 /* Clear the MISC_ERROR Interrupt, which might be generated when doing the relogin */
2753 hp100_page(PERFORMANCE);
2754 hp100_outw(HP100_MISC_ERROR, IRQ_STATUS);
2755
2756 if (val & HP100_LINK_UP_ST)
2757 return (0); /* login was ok */
2758 else {
2759 printk("hp100: %s: Training failed.\n", dev->name);
2760 hp100_down_vg_link(dev);
2761 return -EIO;
2762 }
2763 }
2764 /* no forced relogin & already link there->no training. */
2765 return -EIO;
2766 }
2767
2768 static void hp100_cascade_reset(struct net_device *dev, u_short enable)
2769 {
2770 int ioaddr = dev->base_addr;
2771 struct hp100_private *lp = netdev_priv(dev);
2772
2773 #ifdef HP100_DEBUG_B
2774 hp100_outw(0x4226, TRACE);
2775 printk("hp100: %s: cascade_reset\n", dev->name);
2776 #endif
2777
2778 if (enable) {
2779 hp100_outw(HP100_HW_RST | HP100_RESET_LB, OPTION_LSW);
2780 if (lp->chip == HP100_CHIPID_LASSEN) {
2781 /* Lassen requires a PCI transmit fifo reset */
2782 hp100_page(HW_MAP);
2783 hp100_andb(~HP100_PCI_RESET, PCICTRL2);
2784 hp100_orb(HP100_PCI_RESET, PCICTRL2);
2785 /* Wait for min. 300 ns */
2786 /* we can't use jiffies here, because it may be */
2787 /* that we have disabled the timer... */
2788 udelay(400);
2789 hp100_andb(~HP100_PCI_RESET, PCICTRL2);
2790 hp100_page(PERFORMANCE);
2791 }
2792 } else { /* bring out of reset */
2793 hp100_outw(HP100_HW_RST | HP100_SET_LB, OPTION_LSW);
2794 udelay(400);
2795 hp100_page(PERFORMANCE);
2796 }
2797 }
2798
2799 #ifdef HP100_DEBUG
2800 void hp100_RegisterDump(struct net_device *dev)
2801 {
2802 int ioaddr = dev->base_addr;
2803 int Page;
2804 int Register;
2805
2806 /* Dump common registers */
2807 printk("hp100: %s: Cascade Register Dump\n", dev->name);
2808 printk("hardware id #1: 0x%.2x\n", hp100_inb(HW_ID));
2809 printk("hardware id #2/paging: 0x%.2x\n", hp100_inb(PAGING));
2810 printk("option #1: 0x%.4x\n", hp100_inw(OPTION_LSW));
2811 printk("option #2: 0x%.4x\n", hp100_inw(OPTION_MSW));
2812
2813 /* Dump paged registers */
2814 for (Page = 0; Page < 8; Page++) {
2815 /* Dump registers */
2816 printk("page: 0x%.2x\n", Page);
2817 outw(Page, ioaddr + 0x02);
2818 for (Register = 0x8; Register < 0x22; Register += 2) {
2819 /* Display Register contents except data port */
2820 if (((Register != 0x10) && (Register != 0x12)) || (Page > 0)) {
2821 printk("0x%.2x = 0x%.4x\n", Register, inw(ioaddr + Register));
2822 }
2823 }
2824 }
2825 hp100_page(PERFORMANCE);
2826 }
2827 #endif
2828
2829
2830 static void cleanup_dev(struct net_device *d)
2831 {
2832 struct hp100_private *p = netdev_priv(d);
2833
2834 unregister_netdev(d);
2835 release_region(d->base_addr, HP100_REGION_SIZE);
2836
2837 if (p->mode == 1) /* busmaster */
2838 pci_free_consistent(p->pci_dev, MAX_RINGSIZE + 0x0f,
2839 p->page_vaddr_algn,
2840 virt_to_whatever(d, p->page_vaddr_algn));
2841 if (p->mem_ptr_virt)
2842 iounmap(p->mem_ptr_virt);
2843
2844 free_netdev(d);
2845 }
2846
2847 #ifdef CONFIG_EISA
2848 static int __init hp100_eisa_probe (struct device *gendev)
2849 {
2850 struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
2851 struct eisa_device *edev = to_eisa_device(gendev);
2852 int err;
2853
2854 if (!dev)
2855 return -ENOMEM;
2856
2857 SET_NETDEV_DEV(dev, &edev->dev);
2858
2859 err = hp100_probe1(dev, edev->base_addr + 0xC38, HP100_BUS_EISA, NULL);
2860 if (err)
2861 goto out1;
2862
2863 #ifdef HP100_DEBUG
2864 printk("hp100: %s: EISA adapter found at 0x%x\n", dev->name,
2865 dev->base_addr);
2866 #endif
2867 gendev->driver_data = dev;
2868 return 0;
2869 out1:
2870 free_netdev(dev);
2871 return err;
2872 }
2873
2874 static int __devexit hp100_eisa_remove (struct device *gendev)
2875 {
2876 struct net_device *dev = gendev->driver_data;
2877 cleanup_dev(dev);
2878 return 0;
2879 }
2880
2881 static struct eisa_driver hp100_eisa_driver = {
2882 .id_table = hp100_eisa_tbl,
2883 .driver = {
2884 .name = "hp100",
2885 .probe = hp100_eisa_probe,
2886 .remove = __devexit_p (hp100_eisa_remove),
2887 }
2888 };
2889 #endif
2890
2891 #ifdef CONFIG_PCI
2892 static int __devinit hp100_pci_probe (struct pci_dev *pdev,
2893 const struct pci_device_id *ent)
2894 {
2895 struct net_device *dev;
2896 int ioaddr;
2897 u_short pci_command;
2898 int err;
2899
2900 if (pci_enable_device(pdev))
2901 return -ENODEV;
2902
2903 dev = alloc_etherdev(sizeof(struct hp100_private));
2904 if (!dev) {
2905 err = -ENOMEM;
2906 goto out0;
2907 }
2908
2909 SET_NETDEV_DEV(dev, &pdev->dev);
2910
2911 pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
2912 if (!(pci_command & PCI_COMMAND_IO)) {
2913 #ifdef HP100_DEBUG
2914 printk("hp100: %s: PCI I/O Bit has not been set. Setting...\n", dev->name);
2915 #endif
2916 pci_command |= PCI_COMMAND_IO;
2917 pci_write_config_word(pdev, PCI_COMMAND, pci_command);
2918 }
2919
2920 if (!(pci_command & PCI_COMMAND_MASTER)) {
2921 #ifdef HP100_DEBUG
2922 printk("hp100: %s: PCI Master Bit has not been set. Setting...\n", dev->name);
2923 #endif
2924 pci_command |= PCI_COMMAND_MASTER;
2925 pci_write_config_word(pdev, PCI_COMMAND, pci_command);
2926 }
2927
2928 ioaddr = pci_resource_start(pdev, 0);
2929 err = hp100_probe1(dev, ioaddr, HP100_BUS_PCI, pdev);
2930 if (err)
2931 goto out1;
2932
2933 #ifdef HP100_DEBUG
2934 printk("hp100: %s: PCI adapter found at 0x%x\n", dev->name, ioaddr);
2935 #endif
2936 pci_set_drvdata(pdev, dev);
2937 return 0;
2938 out1:
2939 free_netdev(dev);
2940 out0:
2941 pci_disable_device(pdev);
2942 return err;
2943 }
2944
2945 static void __devexit hp100_pci_remove (struct pci_dev *pdev)
2946 {
2947 struct net_device *dev = pci_get_drvdata(pdev);
2948
2949 cleanup_dev(dev);
2950 pci_disable_device(pdev);
2951 }
2952
2953
2954 static struct pci_driver hp100_pci_driver = {
2955 .name = "hp100",
2956 .id_table = hp100_pci_tbl,
2957 .probe = hp100_pci_probe,
2958 .remove = __devexit_p(hp100_pci_remove),
2959 };
2960 #endif
2961
2962 /*
2963 * module section
2964 */
2965
2966 MODULE_LICENSE("GPL");
2967 MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>, "
2968 "Siegfried \"Frieder\" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>");
2969 MODULE_DESCRIPTION("HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters");
2970
2971 /*
2972 * Note: to register three isa devices, use:
2973 * option hp100 hp100_port=0,0,0
2974 * to register one card at io 0x280 as eth239, use:
2975 * option hp100 hp100_port=0x280
2976 */
2977 #if defined(MODULE) && defined(CONFIG_ISA)
2978 #define HP100_DEVICES 5
2979 /* Parameters set by insmod */
2980 static int hp100_port[HP100_DEVICES] = { 0, [1 ... (HP100_DEVICES-1)] = -1 };
2981 module_param_array(hp100_port, int, NULL, 0);
2982
2983 /* List of devices */
2984 static struct net_device *hp100_devlist[HP100_DEVICES];
2985
2986 static int __init hp100_isa_init(void)
2987 {
2988 struct net_device *dev;
2989 int i, err, cards = 0;
2990
2991 /* Don't autoprobe ISA bus */
2992 if (hp100_port[0] == 0)
2993 return -ENODEV;
2994
2995 /* Loop on all possible base addresses */
2996 for (i = 0; i < HP100_DEVICES && hp100_port[i] != -1; ++i) {
2997 dev = alloc_etherdev(sizeof(struct hp100_private));
2998 if (!dev) {
2999 printk(KERN_WARNING "hp100: no memory for network device\n");
3000 while (cards > 0)
3001 cleanup_dev(hp100_devlist[--cards]);
3002
3003 return -ENOMEM;
3004 }
3005
3006 err = hp100_isa_probe(dev, hp100_port[i]);
3007 if (!err)
3008 hp100_devlist[cards++] = dev;
3009 else
3010 free_netdev(dev);
3011 }
3012
3013 return cards > 0 ? 0 : -ENODEV;
3014 }
3015
3016 static void hp100_isa_cleanup(void)
3017 {
3018 int i;
3019
3020 for (i = 0; i < HP100_DEVICES; i++) {
3021 struct net_device *dev = hp100_devlist[i];
3022 if (dev)
3023 cleanup_dev(dev);
3024 }
3025 }
3026 #else
3027 #define hp100_isa_init() (0)
3028 #define hp100_isa_cleanup() do { } while(0)
3029 #endif
3030
3031 static int __init hp100_module_init(void)
3032 {
3033 int err;
3034
3035 err = hp100_isa_init();
3036 if (err && err != -ENODEV)
3037 goto out;
3038 #ifdef CONFIG_EISA
3039 err = eisa_driver_register(&hp100_eisa_driver);
3040 if (err && err != -ENODEV)
3041 goto out2;
3042 #endif
3043 #ifdef CONFIG_PCI
3044 err = pci_register_driver(&hp100_pci_driver);
3045 if (err && err != -ENODEV)
3046 goto out3;
3047 #endif
3048 out:
3049 return err;
3050 out3:
3051 #ifdef CONFIG_EISA
3052 eisa_driver_unregister (&hp100_eisa_driver);
3053 out2:
3054 #endif
3055 hp100_isa_cleanup();
3056 goto out;
3057 }
3058
3059
3060 static void __exit hp100_module_exit(void)
3061 {
3062 hp100_isa_cleanup();
3063 #ifdef CONFIG_EISA
3064 eisa_driver_unregister (&hp100_eisa_driver);
3065 #endif
3066 #ifdef CONFIG_PCI
3067 pci_unregister_driver (&hp100_pci_driver);
3068 #endif
3069 }
3070
3071 module_init(hp100_module_init)
3072 module_exit(hp100_module_exit)
Support for the Chinese Samsung S3C2440 based development boards