iwlagn: enable 11n aggregation without checking traffic load
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / wireless / iwlwifi / iwl-agn-rs.c
blob3870b723c8c236cc92fdf235d106eeeecd6e8932
1 /******************************************************************************
3 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/skbuff.h>
29 #include <linux/slab.h>
30 #include <net/mac80211.h>
32 #include <linux/netdevice.h>
33 #include <linux/etherdevice.h>
34 #include <linux/delay.h>
36 #include <linux/workqueue.h>
38 #include "iwl-dev.h"
39 #include "iwl-sta.h"
40 #include "iwl-core.h"
41 #include "iwl-agn.h"
43 #define RS_NAME "iwl-agn-rs"
45 #define NUM_TRY_BEFORE_ANT_TOGGLE 1
46 #define IWL_NUMBER_TRY 1
47 #define IWL_HT_NUMBER_TRY 3
49 #define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */
50 #define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
51 #define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
53 /* max allowed rate miss before sync LQ cmd */
54 #define IWL_MISSED_RATE_MAX 15
55 /* max time to accum history 2 seconds */
56 #define IWL_RATE_SCALE_FLUSH_INTVL (3*HZ)
58 static u8 rs_ht_to_legacy[] = {
59 IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
60 IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
61 IWL_RATE_6M_INDEX,
62 IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX,
63 IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX,
64 IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX,
65 IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX
68 static const u8 ant_toggle_lookup[] = {
69 /*ANT_NONE -> */ ANT_NONE,
70 /*ANT_A -> */ ANT_B,
71 /*ANT_B -> */ ANT_C,
72 /*ANT_AB -> */ ANT_BC,
73 /*ANT_C -> */ ANT_A,
74 /*ANT_AC -> */ ANT_AB,
75 /*ANT_BC -> */ ANT_AC,
76 /*ANT_ABC -> */ ANT_ABC,
79 #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
80 [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
81 IWL_RATE_SISO_##s##M_PLCP, \
82 IWL_RATE_MIMO2_##s##M_PLCP,\
83 IWL_RATE_MIMO3_##s##M_PLCP,\
84 IWL_RATE_##r##M_IEEE, \
85 IWL_RATE_##ip##M_INDEX, \
86 IWL_RATE_##in##M_INDEX, \
87 IWL_RATE_##rp##M_INDEX, \
88 IWL_RATE_##rn##M_INDEX, \
89 IWL_RATE_##pp##M_INDEX, \
90 IWL_RATE_##np##M_INDEX }
93 * Parameter order:
94 * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
96 * If there isn't a valid next or previous rate then INV is used which
97 * maps to IWL_RATE_INVALID
100 const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
101 IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
102 IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
103 IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
104 IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
105 IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
106 IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
107 IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
108 IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
109 IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
110 IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
111 IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
112 IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
113 IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
114 /* FIXME:RS: ^^ should be INV (legacy) */
117 static inline u8 rs_extract_rate(u32 rate_n_flags)
119 return (u8)(rate_n_flags & RATE_MCS_RATE_MSK);
122 static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
124 int idx = 0;
126 /* HT rate format */
127 if (rate_n_flags & RATE_MCS_HT_MSK) {
128 idx = rs_extract_rate(rate_n_flags);
130 if (idx >= IWL_RATE_MIMO3_6M_PLCP)
131 idx = idx - IWL_RATE_MIMO3_6M_PLCP;
132 else if (idx >= IWL_RATE_MIMO2_6M_PLCP)
133 idx = idx - IWL_RATE_MIMO2_6M_PLCP;
135 idx += IWL_FIRST_OFDM_RATE;
136 /* skip 9M not supported in ht*/
137 if (idx >= IWL_RATE_9M_INDEX)
138 idx += 1;
139 if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
140 return idx;
142 /* legacy rate format, search for match in table */
143 } else {
144 for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
145 if (iwl_rates[idx].plcp ==
146 rs_extract_rate(rate_n_flags))
147 return idx;
150 return -1;
153 static void rs_rate_scale_perform(struct iwl_priv *priv,
154 struct sk_buff *skb,
155 struct ieee80211_sta *sta,
156 struct iwl_lq_sta *lq_sta);
157 static void rs_fill_link_cmd(struct iwl_priv *priv,
158 struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
159 static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search);
162 #ifdef CONFIG_MAC80211_DEBUGFS
163 static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
164 u32 *rate_n_flags, int index);
165 #else
166 static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
167 u32 *rate_n_flags, int index)
169 #endif
172 * The following tables contain the expected throughput metrics for all rates
174 * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
176 * where invalid entries are zeros.
178 * CCK rates are only valid in legacy table and will only be used in G
179 * (2.4 GHz) band.
182 static s32 expected_tpt_legacy[IWL_RATE_COUNT] = {
183 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
186 static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = {
187 {0, 0, 0, 0, 42, 0, 76, 102, 124, 159, 183, 193, 202}, /* Norm */
188 {0, 0, 0, 0, 46, 0, 82, 110, 132, 168, 192, 202, 210}, /* SGI */
189 {0, 0, 0, 0, 47, 0, 91, 133, 171, 242, 305, 334, 362}, /* AGG */
190 {0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */
193 static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = {
194 {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
195 {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
196 {0, 0, 0, 0, 94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */
197 {0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */
200 static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = {
201 {0, 0, 0, 0, 74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */
202 {0, 0, 0, 0, 81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */
203 {0, 0, 0, 0, 89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */
204 {0, 0, 0, 0, 97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/
207 static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = {
208 {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
209 {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
210 {0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */
211 {0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */
214 static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = {
215 {0, 0, 0, 0, 99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */
216 {0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */
217 {0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */
218 {0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */
221 static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = {
222 {0, 0, 0, 0, 152, 0, 211, 239, 255, 279, 290, 294, 297}, /* Norm */
223 {0, 0, 0, 0, 160, 0, 219, 245, 261, 284, 294, 297, 300}, /* SGI */
224 {0, 0, 0, 0, 254, 0, 443, 584, 695, 868, 984, 1030, 1070}, /* AGG */
225 {0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */
228 /* mbps, mcs */
229 static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
230 { "1", "BPSK DSSS"},
231 { "2", "QPSK DSSS"},
232 {"5.5", "BPSK CCK"},
233 { "11", "QPSK CCK"},
234 { "6", "BPSK 1/2"},
235 { "9", "BPSK 1/2"},
236 { "12", "QPSK 1/2"},
237 { "18", "QPSK 3/4"},
238 { "24", "16QAM 1/2"},
239 { "36", "16QAM 3/4"},
240 { "48", "64QAM 2/3"},
241 { "54", "64QAM 3/4"},
242 { "60", "64QAM 5/6"},
245 #define MCS_INDEX_PER_STREAM (8)
247 static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
249 window->data = 0;
250 window->success_counter = 0;
251 window->success_ratio = IWL_INVALID_VALUE;
252 window->counter = 0;
253 window->average_tpt = IWL_INVALID_VALUE;
254 window->stamp = 0;
257 static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
259 return (ant_type & valid_antenna) == ant_type;
263 * removes the old data from the statistics. All data that is older than
264 * TID_MAX_TIME_DIFF, will be deleted.
266 static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time)
268 /* The oldest age we want to keep */
269 u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
271 while (tl->queue_count &&
272 (tl->time_stamp < oldest_time)) {
273 tl->total -= tl->packet_count[tl->head];
274 tl->packet_count[tl->head] = 0;
275 tl->time_stamp += TID_QUEUE_CELL_SPACING;
276 tl->queue_count--;
277 tl->head++;
278 if (tl->head >= TID_QUEUE_MAX_SIZE)
279 tl->head = 0;
284 * increment traffic load value for tid and also remove
285 * any old values if passed the certain time period
287 static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data,
288 struct ieee80211_hdr *hdr)
290 u32 curr_time = jiffies_to_msecs(jiffies);
291 u32 time_diff;
292 s32 index;
293 struct iwl_traffic_load *tl = NULL;
294 u8 tid;
296 if (ieee80211_is_data_qos(hdr->frame_control)) {
297 u8 *qc = ieee80211_get_qos_ctl(hdr);
298 tid = qc[0] & 0xf;
299 } else
300 return MAX_TID_COUNT;
302 if (unlikely(tid >= TID_MAX_LOAD_COUNT))
303 return MAX_TID_COUNT;
305 tl = &lq_data->load[tid];
307 curr_time -= curr_time % TID_ROUND_VALUE;
309 /* Happens only for the first packet. Initialize the data */
310 if (!(tl->queue_count)) {
311 tl->total = 1;
312 tl->time_stamp = curr_time;
313 tl->queue_count = 1;
314 tl->head = 0;
315 tl->packet_count[0] = 1;
316 return MAX_TID_COUNT;
319 time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
320 index = time_diff / TID_QUEUE_CELL_SPACING;
322 /* The history is too long: remove data that is older than */
323 /* TID_MAX_TIME_DIFF */
324 if (index >= TID_QUEUE_MAX_SIZE)
325 rs_tl_rm_old_stats(tl, curr_time);
327 index = (tl->head + index) % TID_QUEUE_MAX_SIZE;
328 tl->packet_count[index] = tl->packet_count[index] + 1;
329 tl->total = tl->total + 1;
331 if ((index + 1) > tl->queue_count)
332 tl->queue_count = index + 1;
334 return tid;
337 #ifdef CONFIG_MAC80211_DEBUGFS
339 * Program the device to use fixed rate for frame transmit
340 * This is for debugging/testing only
341 * once the device start use fixed rate, we need to reload the module
342 * to being back the normal operation.
344 static void rs_program_fix_rate(struct iwl_priv *priv,
345 struct iwl_lq_sta *lq_sta)
347 struct iwl_station_priv *sta_priv =
348 container_of(lq_sta, struct iwl_station_priv, lq_sta);
349 struct iwl_rxon_context *ctx = sta_priv->common.ctx;
351 lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */
352 lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
353 lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
354 lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
356 #ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
357 /* testmode has higher priority to overwirte the fixed rate */
358 if (priv->tm_fixed_rate)
359 lq_sta->dbg_fixed_rate = priv->tm_fixed_rate;
360 #endif
362 IWL_DEBUG_RATE(priv, "sta_id %d rate 0x%X\n",
363 lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
365 if (lq_sta->dbg_fixed_rate) {
366 rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
367 iwl_send_lq_cmd(lq_sta->drv, ctx, &lq_sta->lq, CMD_ASYNC,
368 false);
371 #endif
374 get the traffic load value for tid
376 static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid)
378 u32 curr_time = jiffies_to_msecs(jiffies);
379 u32 time_diff;
380 s32 index;
381 struct iwl_traffic_load *tl = NULL;
383 if (tid >= TID_MAX_LOAD_COUNT)
384 return 0;
386 tl = &(lq_data->load[tid]);
388 curr_time -= curr_time % TID_ROUND_VALUE;
390 if (!(tl->queue_count))
391 return 0;
393 time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
394 index = time_diff / TID_QUEUE_CELL_SPACING;
396 /* The history is too long: remove data that is older than */
397 /* TID_MAX_TIME_DIFF */
398 if (index >= TID_QUEUE_MAX_SIZE)
399 rs_tl_rm_old_stats(tl, curr_time);
401 return tl->total;
404 static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
405 struct iwl_lq_sta *lq_data, u8 tid,
406 struct ieee80211_sta *sta)
408 int ret = -EAGAIN;
409 u32 load;
412 * Don't create TX aggregation sessions when in high
413 * BT traffic, as they would just be disrupted by BT.
415 if (priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) {
416 IWL_ERR(priv, "BT traffic (%d), no aggregation allowed\n",
417 priv->bt_traffic_load);
418 return ret;
421 load = rs_tl_get_load(lq_data, tid);
423 if ((iwlagn_mod_params.auto_agg) || (load > IWL_AGG_LOAD_THRESHOLD)) {
424 IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n",
425 sta->addr, tid);
426 ret = ieee80211_start_tx_ba_session(sta, tid, 5000);
427 if (ret == -EAGAIN) {
429 * driver and mac80211 is out of sync
430 * this might be cause by reloading firmware
431 * stop the tx ba session here
433 IWL_ERR(priv, "Fail start Tx agg on tid: %d\n",
434 tid);
435 ieee80211_stop_tx_ba_session(sta, tid);
437 } else {
438 IWL_DEBUG_HT(priv, "Aggregation not enabled for tid %d "
439 "because load = %u\n", tid, load);
441 return ret;
444 static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
445 struct iwl_lq_sta *lq_data,
446 struct ieee80211_sta *sta)
448 if (tid < TID_MAX_LOAD_COUNT)
449 rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
450 else
451 IWL_ERR(priv, "tid exceeds max load count: %d/%d\n",
452 tid, TID_MAX_LOAD_COUNT);
455 static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
457 return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
458 !!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
459 !!(rate_n_flags & RATE_MCS_ANT_C_MSK);
463 * Static function to get the expected throughput from an iwl_scale_tbl_info
464 * that wraps a NULL pointer check
466 static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index)
468 if (tbl->expected_tpt)
469 return tbl->expected_tpt[rs_index];
470 return 0;
474 * rs_collect_tx_data - Update the success/failure sliding window
476 * We keep a sliding window of the last 62 packets transmitted
477 * at this rate. window->data contains the bitmask of successful
478 * packets.
480 static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
481 int scale_index, int attempts, int successes)
483 struct iwl_rate_scale_data *window = NULL;
484 static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1));
485 s32 fail_count, tpt;
487 if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
488 return -EINVAL;
490 /* Select window for current tx bit rate */
491 window = &(tbl->win[scale_index]);
493 /* Get expected throughput */
494 tpt = get_expected_tpt(tbl, scale_index);
497 * Keep track of only the latest 62 tx frame attempts in this rate's
498 * history window; anything older isn't really relevant any more.
499 * If we have filled up the sliding window, drop the oldest attempt;
500 * if the oldest attempt (highest bit in bitmap) shows "success",
501 * subtract "1" from the success counter (this is the main reason
502 * we keep these bitmaps!).
504 while (attempts > 0) {
505 if (window->counter >= IWL_RATE_MAX_WINDOW) {
507 /* remove earliest */
508 window->counter = IWL_RATE_MAX_WINDOW - 1;
510 if (window->data & mask) {
511 window->data &= ~mask;
512 window->success_counter--;
516 /* Increment frames-attempted counter */
517 window->counter++;
519 /* Shift bitmap by one frame to throw away oldest history */
520 window->data <<= 1;
522 /* Mark the most recent #successes attempts as successful */
523 if (successes > 0) {
524 window->success_counter++;
525 window->data |= 0x1;
526 successes--;
529 attempts--;
532 /* Calculate current success ratio, avoid divide-by-0! */
533 if (window->counter > 0)
534 window->success_ratio = 128 * (100 * window->success_counter)
535 / window->counter;
536 else
537 window->success_ratio = IWL_INVALID_VALUE;
539 fail_count = window->counter - window->success_counter;
541 /* Calculate average throughput, if we have enough history. */
542 if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
543 (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
544 window->average_tpt = (window->success_ratio * tpt + 64) / 128;
545 else
546 window->average_tpt = IWL_INVALID_VALUE;
548 /* Tag this window as having been updated */
549 window->stamp = jiffies;
551 return 0;
555 * Fill uCode API rate_n_flags field, based on "search" or "active" table.
557 /* FIXME:RS:remove this function and put the flags statically in the table */
558 static u32 rate_n_flags_from_tbl(struct iwl_priv *priv,
559 struct iwl_scale_tbl_info *tbl,
560 int index, u8 use_green)
562 u32 rate_n_flags = 0;
564 if (is_legacy(tbl->lq_type)) {
565 rate_n_flags = iwl_rates[index].plcp;
566 if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE)
567 rate_n_flags |= RATE_MCS_CCK_MSK;
569 } else if (is_Ht(tbl->lq_type)) {
570 if (index > IWL_LAST_OFDM_RATE) {
571 IWL_ERR(priv, "Invalid HT rate index %d\n", index);
572 index = IWL_LAST_OFDM_RATE;
574 rate_n_flags = RATE_MCS_HT_MSK;
576 if (is_siso(tbl->lq_type))
577 rate_n_flags |= iwl_rates[index].plcp_siso;
578 else if (is_mimo2(tbl->lq_type))
579 rate_n_flags |= iwl_rates[index].plcp_mimo2;
580 else
581 rate_n_flags |= iwl_rates[index].plcp_mimo3;
582 } else {
583 IWL_ERR(priv, "Invalid tbl->lq_type %d\n", tbl->lq_type);
586 rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) &
587 RATE_MCS_ANT_ABC_MSK);
589 if (is_Ht(tbl->lq_type)) {
590 if (tbl->is_ht40) {
591 if (tbl->is_dup)
592 rate_n_flags |= RATE_MCS_DUP_MSK;
593 else
594 rate_n_flags |= RATE_MCS_HT40_MSK;
596 if (tbl->is_SGI)
597 rate_n_flags |= RATE_MCS_SGI_MSK;
599 if (use_green) {
600 rate_n_flags |= RATE_MCS_GF_MSK;
601 if (is_siso(tbl->lq_type) && tbl->is_SGI) {
602 rate_n_flags &= ~RATE_MCS_SGI_MSK;
603 IWL_ERR(priv, "GF was set with SGI:SISO\n");
607 return rate_n_flags;
611 * Interpret uCode API's rate_n_flags format,
612 * fill "search" or "active" tx mode table.
614 static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
615 enum ieee80211_band band,
616 struct iwl_scale_tbl_info *tbl,
617 int *rate_idx)
619 u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
620 u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags);
621 u8 mcs;
623 memset(tbl, 0, sizeof(struct iwl_scale_tbl_info));
624 *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
626 if (*rate_idx == IWL_RATE_INVALID) {
627 *rate_idx = -1;
628 return -EINVAL;
630 tbl->is_SGI = 0; /* default legacy setup */
631 tbl->is_ht40 = 0;
632 tbl->is_dup = 0;
633 tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
634 tbl->lq_type = LQ_NONE;
635 tbl->max_search = IWL_MAX_SEARCH;
637 /* legacy rate format */
638 if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
639 if (num_of_ant == 1) {
640 if (band == IEEE80211_BAND_5GHZ)
641 tbl->lq_type = LQ_A;
642 else
643 tbl->lq_type = LQ_G;
645 /* HT rate format */
646 } else {
647 if (rate_n_flags & RATE_MCS_SGI_MSK)
648 tbl->is_SGI = 1;
650 if ((rate_n_flags & RATE_MCS_HT40_MSK) ||
651 (rate_n_flags & RATE_MCS_DUP_MSK))
652 tbl->is_ht40 = 1;
654 if (rate_n_flags & RATE_MCS_DUP_MSK)
655 tbl->is_dup = 1;
657 mcs = rs_extract_rate(rate_n_flags);
659 /* SISO */
660 if (mcs <= IWL_RATE_SISO_60M_PLCP) {
661 if (num_of_ant == 1)
662 tbl->lq_type = LQ_SISO; /*else NONE*/
663 /* MIMO2 */
664 } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) {
665 if (num_of_ant == 2)
666 tbl->lq_type = LQ_MIMO2;
667 /* MIMO3 */
668 } else {
669 if (num_of_ant == 3) {
670 tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
671 tbl->lq_type = LQ_MIMO3;
675 return 0;
678 /* switch to another antenna/antennas and return 1 */
679 /* if no other valid antenna found, return 0 */
680 static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
681 struct iwl_scale_tbl_info *tbl)
683 u8 new_ant_type;
685 if (!tbl->ant_type || tbl->ant_type > ANT_ABC)
686 return 0;
688 if (!rs_is_valid_ant(valid_ant, tbl->ant_type))
689 return 0;
691 new_ant_type = ant_toggle_lookup[tbl->ant_type];
693 while ((new_ant_type != tbl->ant_type) &&
694 !rs_is_valid_ant(valid_ant, new_ant_type))
695 new_ant_type = ant_toggle_lookup[new_ant_type];
697 if (new_ant_type == tbl->ant_type)
698 return 0;
700 tbl->ant_type = new_ant_type;
701 *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK;
702 *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS;
703 return 1;
707 * Green-field mode is valid if the station supports it and
708 * there are no non-GF stations present in the BSS.
710 static bool rs_use_green(struct ieee80211_sta *sta)
712 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
713 struct iwl_rxon_context *ctx = sta_priv->common.ctx;
715 return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
716 !(ctx->ht.non_gf_sta_present);
720 * rs_get_supported_rates - get the available rates
722 * if management frame or broadcast frame only return
723 * basic available rates.
726 static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta,
727 struct ieee80211_hdr *hdr,
728 enum iwl_table_type rate_type)
730 if (is_legacy(rate_type)) {
731 return lq_sta->active_legacy_rate;
732 } else {
733 if (is_siso(rate_type))
734 return lq_sta->active_siso_rate;
735 else if (is_mimo2(rate_type))
736 return lq_sta->active_mimo2_rate;
737 else
738 return lq_sta->active_mimo3_rate;
742 static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask,
743 int rate_type)
745 u8 high = IWL_RATE_INVALID;
746 u8 low = IWL_RATE_INVALID;
748 /* 802.11A or ht walks to the next literal adjacent rate in
749 * the rate table */
750 if (is_a_band(rate_type) || !is_legacy(rate_type)) {
751 int i;
752 u32 mask;
754 /* Find the previous rate that is in the rate mask */
755 i = index - 1;
756 for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
757 if (rate_mask & mask) {
758 low = i;
759 break;
763 /* Find the next rate that is in the rate mask */
764 i = index + 1;
765 for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) {
766 if (rate_mask & mask) {
767 high = i;
768 break;
772 return (high << 8) | low;
775 low = index;
776 while (low != IWL_RATE_INVALID) {
777 low = iwl_rates[low].prev_rs;
778 if (low == IWL_RATE_INVALID)
779 break;
780 if (rate_mask & (1 << low))
781 break;
782 IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low);
785 high = index;
786 while (high != IWL_RATE_INVALID) {
787 high = iwl_rates[high].next_rs;
788 if (high == IWL_RATE_INVALID)
789 break;
790 if (rate_mask & (1 << high))
791 break;
792 IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high);
795 return (high << 8) | low;
798 static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
799 struct iwl_scale_tbl_info *tbl,
800 u8 scale_index, u8 ht_possible)
802 s32 low;
803 u16 rate_mask;
804 u16 high_low;
805 u8 switch_to_legacy = 0;
806 u8 is_green = lq_sta->is_green;
807 struct iwl_priv *priv = lq_sta->drv;
809 /* check if we need to switch from HT to legacy rates.
810 * assumption is that mandatory rates (1Mbps or 6Mbps)
811 * are always supported (spec demand) */
812 if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) {
813 switch_to_legacy = 1;
814 scale_index = rs_ht_to_legacy[scale_index];
815 if (lq_sta->band == IEEE80211_BAND_5GHZ)
816 tbl->lq_type = LQ_A;
817 else
818 tbl->lq_type = LQ_G;
820 if (num_of_ant(tbl->ant_type) > 1)
821 tbl->ant_type =
822 first_antenna(hw_params(priv).valid_tx_ant);
824 tbl->is_ht40 = 0;
825 tbl->is_SGI = 0;
826 tbl->max_search = IWL_MAX_SEARCH;
829 rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
831 /* Mask with station rate restriction */
832 if (is_legacy(tbl->lq_type)) {
833 /* supp_rates has no CCK bits in A mode */
834 if (lq_sta->band == IEEE80211_BAND_5GHZ)
835 rate_mask = (u16)(rate_mask &
836 (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
837 else
838 rate_mask = (u16)(rate_mask & lq_sta->supp_rates);
841 /* If we switched from HT to legacy, check current rate */
842 if (switch_to_legacy && (rate_mask & (1 << scale_index))) {
843 low = scale_index;
844 goto out;
847 high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask,
848 tbl->lq_type);
849 low = high_low & 0xff;
851 if (low == IWL_RATE_INVALID)
852 low = scale_index;
854 out:
855 return rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green);
859 * Simple function to compare two rate scale table types
861 static bool table_type_matches(struct iwl_scale_tbl_info *a,
862 struct iwl_scale_tbl_info *b)
864 return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) &&
865 (a->is_SGI == b->is_SGI);
868 static void rs_bt_update_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
869 struct iwl_lq_sta *lq_sta)
871 struct iwl_scale_tbl_info *tbl;
872 bool full_concurrent = priv->bt_full_concurrent;
873 unsigned long flags;
875 if (priv->bt_ant_couple_ok) {
877 * Is there a need to switch between
878 * full concurrency and 3-wire?
880 spin_lock_irqsave(&priv->shrd->lock, flags);
881 if (priv->bt_ci_compliance && priv->bt_ant_couple_ok)
882 full_concurrent = true;
883 else
884 full_concurrent = false;
885 spin_unlock_irqrestore(&priv->shrd->lock, flags);
887 if ((priv->bt_traffic_load != priv->last_bt_traffic_load) ||
888 (priv->bt_full_concurrent != full_concurrent)) {
889 priv->bt_full_concurrent = full_concurrent;
891 /* Update uCode's rate table. */
892 tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
893 rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
894 iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
896 queue_work(priv->shrd->workqueue, &priv->bt_full_concurrency);
901 * mac80211 sends us Tx status
903 static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
904 struct ieee80211_sta *sta, void *priv_sta,
905 struct sk_buff *skb)
907 int legacy_success;
908 int retries;
909 int rs_index, mac_index, i;
910 struct iwl_lq_sta *lq_sta = priv_sta;
911 struct iwl_link_quality_cmd *table;
912 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
913 struct iwl_priv *priv = (struct iwl_priv *)priv_r;
914 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
915 enum mac80211_rate_control_flags mac_flags;
916 u32 tx_rate;
917 struct iwl_scale_tbl_info tbl_type;
918 struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl;
919 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
920 struct iwl_rxon_context *ctx = sta_priv->common.ctx;
922 IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
924 /* Treat uninitialized rate scaling data same as non-existing. */
925 if (!lq_sta) {
926 IWL_DEBUG_RATE(priv, "Station rate scaling not created yet.\n");
927 return;
928 } else if (!lq_sta->drv) {
929 IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
930 return;
933 if (!ieee80211_is_data(hdr->frame_control) ||
934 info->flags & IEEE80211_TX_CTL_NO_ACK)
935 return;
937 /* This packet was aggregated but doesn't carry status info */
938 if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
939 !(info->flags & IEEE80211_TX_STAT_AMPDU))
940 return;
943 * Ignore this Tx frame response if its initial rate doesn't match
944 * that of latest Link Quality command. There may be stragglers
945 * from a previous Link Quality command, but we're no longer interested
946 * in those; they're either from the "active" mode while we're trying
947 * to check "search" mode, or a prior "search" mode after we've moved
948 * to a new "search" mode (which might become the new "active" mode).
950 table = &lq_sta->lq;
951 tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
952 rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
953 if (priv->band == IEEE80211_BAND_5GHZ)
954 rs_index -= IWL_FIRST_OFDM_RATE;
955 mac_flags = info->status.rates[0].flags;
956 mac_index = info->status.rates[0].idx;
957 /* For HT packets, map MCS to PLCP */
958 if (mac_flags & IEEE80211_TX_RC_MCS) {
959 mac_index &= RATE_MCS_CODE_MSK; /* Remove # of streams */
960 if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE))
961 mac_index++;
963 * mac80211 HT index is always zero-indexed; we need to move
964 * HT OFDM rates after CCK rates in 2.4 GHz band
966 if (priv->band == IEEE80211_BAND_2GHZ)
967 mac_index += IWL_FIRST_OFDM_RATE;
969 /* Here we actually compare this rate to the latest LQ command */
970 if ((mac_index < 0) ||
971 (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) ||
972 (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
973 (tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA)) ||
974 (tbl_type.ant_type != info->antenna_sel_tx) ||
975 (!!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)) ||
976 (!!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
977 (rs_index != mac_index)) {
978 IWL_DEBUG_RATE(priv, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate);
980 * Since rates mis-match, the last LQ command may have failed.
981 * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with
982 * ... driver.
984 lq_sta->missed_rate_counter++;
985 if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) {
986 lq_sta->missed_rate_counter = 0;
987 iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
989 /* Regardless, ignore this status info for outdated rate */
990 return;
991 } else
992 /* Rate did match, so reset the missed_rate_counter */
993 lq_sta->missed_rate_counter = 0;
995 /* Figure out if rate scale algorithm is in active or search table */
996 if (table_type_matches(&tbl_type,
997 &(lq_sta->lq_info[lq_sta->active_tbl]))) {
998 curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
999 other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
1000 } else if (table_type_matches(&tbl_type,
1001 &lq_sta->lq_info[1 - lq_sta->active_tbl])) {
1002 curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
1003 other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1004 } else {
1005 IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n");
1006 tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1007 IWL_DEBUG_RATE(priv, "active- lq:%x, ant:%x, SGI:%d\n",
1008 tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI);
1009 tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
1010 IWL_DEBUG_RATE(priv, "search- lq:%x, ant:%x, SGI:%d\n",
1011 tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI);
1012 IWL_DEBUG_RATE(priv, "actual- lq:%x, ant:%x, SGI:%d\n",
1013 tbl_type.lq_type, tbl_type.ant_type, tbl_type.is_SGI);
1015 * no matching table found, let's by-pass the data collection
1016 * and continue to perform rate scale to find the rate table
1018 rs_stay_in_table(lq_sta, true);
1019 goto done;
1023 * Updating the frame history depends on whether packets were
1024 * aggregated.
1026 * For aggregation, all packets were transmitted at the same rate, the
1027 * first index into rate scale table.
1029 if (info->flags & IEEE80211_TX_STAT_AMPDU) {
1030 tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
1031 rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type,
1032 &rs_index);
1033 rs_collect_tx_data(curr_tbl, rs_index,
1034 info->status.ampdu_len,
1035 info->status.ampdu_ack_len);
1037 /* Update success/fail counts if not searching for new mode */
1038 if (lq_sta->stay_in_tbl) {
1039 lq_sta->total_success += info->status.ampdu_ack_len;
1040 lq_sta->total_failed += (info->status.ampdu_len -
1041 info->status.ampdu_ack_len);
1043 } else {
1045 * For legacy, update frame history with for each Tx retry.
1047 retries = info->status.rates[0].count - 1;
1048 /* HW doesn't send more than 15 retries */
1049 retries = min(retries, 15);
1051 /* The last transmission may have been successful */
1052 legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK);
1053 /* Collect data for each rate used during failed TX attempts */
1054 for (i = 0; i <= retries; ++i) {
1055 tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags);
1056 rs_get_tbl_info_from_mcs(tx_rate, priv->band,
1057 &tbl_type, &rs_index);
1059 * Only collect stats if retried rate is in the same RS
1060 * table as active/search.
1062 if (table_type_matches(&tbl_type, curr_tbl))
1063 tmp_tbl = curr_tbl;
1064 else if (table_type_matches(&tbl_type, other_tbl))
1065 tmp_tbl = other_tbl;
1066 else
1067 continue;
1068 rs_collect_tx_data(tmp_tbl, rs_index, 1,
1069 i < retries ? 0 : legacy_success);
1072 /* Update success/fail counts if not searching for new mode */
1073 if (lq_sta->stay_in_tbl) {
1074 lq_sta->total_success += legacy_success;
1075 lq_sta->total_failed += retries + (1 - legacy_success);
1078 /* The last TX rate is cached in lq_sta; it's set in if/else above */
1079 lq_sta->last_rate_n_flags = tx_rate;
1080 done:
1081 /* See if there's a better rate or modulation mode to try. */
1082 if (sta && sta->supp_rates[sband->band])
1083 rs_rate_scale_perform(priv, skb, sta, lq_sta);
1085 #if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_IWLWIFI_DEVICE_SVTOOL)
1086 if ((priv->tm_fixed_rate) &&
1087 (priv->tm_fixed_rate != lq_sta->dbg_fixed_rate))
1088 rs_program_fix_rate(priv, lq_sta);
1089 #endif
1090 if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist)
1091 rs_bt_update_lq(priv, ctx, lq_sta);
1095 * Begin a period of staying with a selected modulation mode.
1096 * Set "stay_in_tbl" flag to prevent any mode switches.
1097 * Set frame tx success limits according to legacy vs. high-throughput,
1098 * and reset overall (spanning all rates) tx success history statistics.
1099 * These control how long we stay using same modulation mode before
1100 * searching for a new mode.
1102 static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
1103 struct iwl_lq_sta *lq_sta)
1105 IWL_DEBUG_RATE(priv, "we are staying in the same table\n");
1106 lq_sta->stay_in_tbl = 1; /* only place this gets set */
1107 if (is_legacy) {
1108 lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT;
1109 lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT;
1110 lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT;
1111 } else {
1112 lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT;
1113 lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT;
1114 lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT;
1116 lq_sta->table_count = 0;
1117 lq_sta->total_failed = 0;
1118 lq_sta->total_success = 0;
1119 lq_sta->flush_timer = jiffies;
1120 lq_sta->action_counter = 0;
1124 * Find correct throughput table for given mode of modulation
1126 static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
1127 struct iwl_scale_tbl_info *tbl)
1129 /* Used to choose among HT tables */
1130 s32 (*ht_tbl_pointer)[IWL_RATE_COUNT];
1132 /* Check for invalid LQ type */
1133 if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
1134 tbl->expected_tpt = expected_tpt_legacy;
1135 return;
1138 /* Legacy rates have only one table */
1139 if (is_legacy(tbl->lq_type)) {
1140 tbl->expected_tpt = expected_tpt_legacy;
1141 return;
1144 /* Choose among many HT tables depending on number of streams
1145 * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation
1146 * status */
1147 if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
1148 ht_tbl_pointer = expected_tpt_siso20MHz;
1149 else if (is_siso(tbl->lq_type))
1150 ht_tbl_pointer = expected_tpt_siso40MHz;
1151 else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
1152 ht_tbl_pointer = expected_tpt_mimo2_20MHz;
1153 else if (is_mimo2(tbl->lq_type))
1154 ht_tbl_pointer = expected_tpt_mimo2_40MHz;
1155 else if (is_mimo3(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
1156 ht_tbl_pointer = expected_tpt_mimo3_20MHz;
1157 else /* if (is_mimo3(tbl->lq_type)) <-- must be true */
1158 ht_tbl_pointer = expected_tpt_mimo3_40MHz;
1160 if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */
1161 tbl->expected_tpt = ht_tbl_pointer[0];
1162 else if (tbl->is_SGI && !lq_sta->is_agg) /* SGI */
1163 tbl->expected_tpt = ht_tbl_pointer[1];
1164 else if (!tbl->is_SGI && lq_sta->is_agg) /* AGG */
1165 tbl->expected_tpt = ht_tbl_pointer[2];
1166 else /* AGG+SGI */
1167 tbl->expected_tpt = ht_tbl_pointer[3];
1171 * Find starting rate for new "search" high-throughput mode of modulation.
1172 * Goal is to find lowest expected rate (under perfect conditions) that is
1173 * above the current measured throughput of "active" mode, to give new mode
1174 * a fair chance to prove itself without too many challenges.
1176 * This gets called when transitioning to more aggressive modulation
1177 * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
1178 * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need
1179 * to decrease to match "active" throughput. When moving from MIMO to SISO,
1180 * bit rate will typically need to increase, but not if performance was bad.
1182 static s32 rs_get_best_rate(struct iwl_priv *priv,
1183 struct iwl_lq_sta *lq_sta,
1184 struct iwl_scale_tbl_info *tbl, /* "search" */
1185 u16 rate_mask, s8 index)
1187 /* "active" values */
1188 struct iwl_scale_tbl_info *active_tbl =
1189 &(lq_sta->lq_info[lq_sta->active_tbl]);
1190 s32 active_sr = active_tbl->win[index].success_ratio;
1191 s32 active_tpt = active_tbl->expected_tpt[index];
1193 /* expected "search" throughput */
1194 s32 *tpt_tbl = tbl->expected_tpt;
1196 s32 new_rate, high, low, start_hi;
1197 u16 high_low;
1198 s8 rate = index;
1200 new_rate = high = low = start_hi = IWL_RATE_INVALID;
1202 for (; ;) {
1203 high_low = rs_get_adjacent_rate(priv, rate, rate_mask,
1204 tbl->lq_type);
1206 low = high_low & 0xff;
1207 high = (high_low >> 8) & 0xff;
1210 * Lower the "search" bit rate, to give new "search" mode
1211 * approximately the same throughput as "active" if:
1213 * 1) "Active" mode has been working modestly well (but not
1214 * great), and expected "search" throughput (under perfect
1215 * conditions) at candidate rate is above the actual
1216 * measured "active" throughput (but less than expected
1217 * "active" throughput under perfect conditions).
1218 * OR
1219 * 2) "Active" mode has been working perfectly or very well
1220 * and expected "search" throughput (under perfect
1221 * conditions) at candidate rate is above expected
1222 * "active" throughput (under perfect conditions).
1224 if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) &&
1225 ((active_sr > IWL_RATE_DECREASE_TH) &&
1226 (active_sr <= IWL_RATE_HIGH_TH) &&
1227 (tpt_tbl[rate] <= active_tpt))) ||
1228 ((active_sr >= IWL_RATE_SCALE_SWITCH) &&
1229 (tpt_tbl[rate] > active_tpt))) {
1231 /* (2nd or later pass)
1232 * If we've already tried to raise the rate, and are
1233 * now trying to lower it, use the higher rate. */
1234 if (start_hi != IWL_RATE_INVALID) {
1235 new_rate = start_hi;
1236 break;
1239 new_rate = rate;
1241 /* Loop again with lower rate */
1242 if (low != IWL_RATE_INVALID)
1243 rate = low;
1245 /* Lower rate not available, use the original */
1246 else
1247 break;
1249 /* Else try to raise the "search" rate to match "active" */
1250 } else {
1251 /* (2nd or later pass)
1252 * If we've already tried to lower the rate, and are
1253 * now trying to raise it, use the lower rate. */
1254 if (new_rate != IWL_RATE_INVALID)
1255 break;
1257 /* Loop again with higher rate */
1258 else if (high != IWL_RATE_INVALID) {
1259 start_hi = high;
1260 rate = high;
1262 /* Higher rate not available, use the original */
1263 } else {
1264 new_rate = rate;
1265 break;
1270 return new_rate;
1274 * Set up search table for MIMO2
1276 static int rs_switch_to_mimo2(struct iwl_priv *priv,
1277 struct iwl_lq_sta *lq_sta,
1278 struct ieee80211_conf *conf,
1279 struct ieee80211_sta *sta,
1280 struct iwl_scale_tbl_info *tbl, int index)
1282 u16 rate_mask;
1283 s32 rate;
1284 s8 is_green = lq_sta->is_green;
1285 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
1286 struct iwl_rxon_context *ctx = sta_priv->common.ctx;
1288 if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
1289 return -1;
1291 if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
1292 == WLAN_HT_CAP_SM_PS_STATIC)
1293 return -1;
1295 /* Need both Tx chains/antennas to support MIMO */
1296 if (hw_params(priv).tx_chains_num < 2)
1297 return -1;
1299 IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO2\n");
1301 tbl->lq_type = LQ_MIMO2;
1302 tbl->is_dup = lq_sta->is_dup;
1303 tbl->action = 0;
1304 tbl->max_search = IWL_MAX_SEARCH;
1305 rate_mask = lq_sta->active_mimo2_rate;
1307 if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
1308 tbl->is_ht40 = 1;
1309 else
1310 tbl->is_ht40 = 0;
1312 rs_set_expected_tpt_table(lq_sta, tbl);
1314 rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
1316 IWL_DEBUG_RATE(priv, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
1317 if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
1318 IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
1319 rate, rate_mask);
1320 return -1;
1322 tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
1324 IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
1325 tbl->current_rate, is_green);
1326 return 0;
1330 * Set up search table for MIMO3
1332 static int rs_switch_to_mimo3(struct iwl_priv *priv,
1333 struct iwl_lq_sta *lq_sta,
1334 struct ieee80211_conf *conf,
1335 struct ieee80211_sta *sta,
1336 struct iwl_scale_tbl_info *tbl, int index)
1338 u16 rate_mask;
1339 s32 rate;
1340 s8 is_green = lq_sta->is_green;
1341 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
1342 struct iwl_rxon_context *ctx = sta_priv->common.ctx;
1344 if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
1345 return -1;
1347 if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
1348 == WLAN_HT_CAP_SM_PS_STATIC)
1349 return -1;
1351 /* Need both Tx chains/antennas to support MIMO */
1352 if (hw_params(priv).tx_chains_num < 3)
1353 return -1;
1355 IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO3\n");
1357 tbl->lq_type = LQ_MIMO3;
1358 tbl->is_dup = lq_sta->is_dup;
1359 tbl->action = 0;
1360 tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
1361 rate_mask = lq_sta->active_mimo3_rate;
1363 if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
1364 tbl->is_ht40 = 1;
1365 else
1366 tbl->is_ht40 = 0;
1368 rs_set_expected_tpt_table(lq_sta, tbl);
1370 rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
1372 IWL_DEBUG_RATE(priv, "LQ: MIMO3 best rate %d mask %X\n",
1373 rate, rate_mask);
1374 if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
1375 IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
1376 rate, rate_mask);
1377 return -1;
1379 tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
1381 IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
1382 tbl->current_rate, is_green);
1383 return 0;
1387 * Set up search table for SISO
1389 static int rs_switch_to_siso(struct iwl_priv *priv,
1390 struct iwl_lq_sta *lq_sta,
1391 struct ieee80211_conf *conf,
1392 struct ieee80211_sta *sta,
1393 struct iwl_scale_tbl_info *tbl, int index)
1395 u16 rate_mask;
1396 u8 is_green = lq_sta->is_green;
1397 s32 rate;
1398 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
1399 struct iwl_rxon_context *ctx = sta_priv->common.ctx;
1401 if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
1402 return -1;
1404 IWL_DEBUG_RATE(priv, "LQ: try to switch to SISO\n");
1406 tbl->is_dup = lq_sta->is_dup;
1407 tbl->lq_type = LQ_SISO;
1408 tbl->action = 0;
1409 tbl->max_search = IWL_MAX_SEARCH;
1410 rate_mask = lq_sta->active_siso_rate;
1412 if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
1413 tbl->is_ht40 = 1;
1414 else
1415 tbl->is_ht40 = 0;
1417 if (is_green)
1418 tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/
1420 rs_set_expected_tpt_table(lq_sta, tbl);
1421 rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
1423 IWL_DEBUG_RATE(priv, "LQ: get best rate %d mask %X\n", rate, rate_mask);
1424 if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
1425 IWL_DEBUG_RATE(priv, "can not switch with index %d rate mask %x\n",
1426 rate, rate_mask);
1427 return -1;
1429 tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
1430 IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
1431 tbl->current_rate, is_green);
1432 return 0;
1436 * Try to switch to new modulation mode from legacy
1438 static int rs_move_legacy_other(struct iwl_priv *priv,
1439 struct iwl_lq_sta *lq_sta,
1440 struct ieee80211_conf *conf,
1441 struct ieee80211_sta *sta,
1442 int index)
1444 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1445 struct iwl_scale_tbl_info *search_tbl =
1446 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1447 struct iwl_rate_scale_data *window = &(tbl->win[index]);
1448 u32 sz = (sizeof(struct iwl_scale_tbl_info) -
1449 (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
1450 u8 start_action;
1451 u8 valid_tx_ant = hw_params(priv).valid_tx_ant;
1452 u8 tx_chains_num = hw_params(priv).tx_chains_num;
1453 int ret = 0;
1454 u8 update_search_tbl_counter = 0;
1456 switch (priv->bt_traffic_load) {
1457 case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
1458 /* nothing */
1459 break;
1460 case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
1461 /* avoid antenna B unless MIMO */
1462 valid_tx_ant =
1463 first_antenna(hw_params(priv).valid_tx_ant);
1464 if (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2)
1465 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1466 break;
1467 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
1468 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
1469 /* avoid antenna B and MIMO */
1470 valid_tx_ant =
1471 first_antenna(hw_params(priv).valid_tx_ant);
1472 if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2 &&
1473 tbl->action != IWL_LEGACY_SWITCH_SISO)
1474 tbl->action = IWL_LEGACY_SWITCH_SISO;
1475 break;
1476 default:
1477 IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
1478 break;
1481 if (!iwl_ht_enabled(priv))
1482 /* stay in Legacy */
1483 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1484 else if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
1485 tbl->action > IWL_LEGACY_SWITCH_SISO)
1486 tbl->action = IWL_LEGACY_SWITCH_SISO;
1488 /* configure as 1x1 if bt full concurrency */
1489 if (priv->bt_full_concurrent) {
1490 if (!iwl_ht_enabled(priv))
1491 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1492 else if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
1493 tbl->action = IWL_LEGACY_SWITCH_SISO;
1494 valid_tx_ant =
1495 first_antenna(hw_params(priv).valid_tx_ant);
1498 start_action = tbl->action;
1499 for (; ;) {
1500 lq_sta->action_counter++;
1501 switch (tbl->action) {
1502 case IWL_LEGACY_SWITCH_ANTENNA1:
1503 case IWL_LEGACY_SWITCH_ANTENNA2:
1504 IWL_DEBUG_RATE(priv, "LQ: Legacy toggle Antenna\n");
1506 if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 &&
1507 tx_chains_num <= 1) ||
1508 (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 &&
1509 tx_chains_num <= 2))
1510 break;
1512 /* Don't change antenna if success has been great */
1513 if (window->success_ratio >= IWL_RS_GOOD_RATIO &&
1514 !priv->bt_full_concurrent &&
1515 priv->bt_traffic_load ==
1516 IWL_BT_COEX_TRAFFIC_LOAD_NONE)
1517 break;
1519 /* Set up search table to try other antenna */
1520 memcpy(search_tbl, tbl, sz);
1522 if (rs_toggle_antenna(valid_tx_ant,
1523 &search_tbl->current_rate, search_tbl)) {
1524 update_search_tbl_counter = 1;
1525 rs_set_expected_tpt_table(lq_sta, search_tbl);
1526 goto out;
1528 break;
1529 case IWL_LEGACY_SWITCH_SISO:
1530 IWL_DEBUG_RATE(priv, "LQ: Legacy switch to SISO\n");
1532 /* Set up search table to try SISO */
1533 memcpy(search_tbl, tbl, sz);
1534 search_tbl->is_SGI = 0;
1535 ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
1536 search_tbl, index);
1537 if (!ret) {
1538 lq_sta->action_counter = 0;
1539 goto out;
1542 break;
1543 case IWL_LEGACY_SWITCH_MIMO2_AB:
1544 case IWL_LEGACY_SWITCH_MIMO2_AC:
1545 case IWL_LEGACY_SWITCH_MIMO2_BC:
1546 IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO2\n");
1548 /* Set up search table to try MIMO */
1549 memcpy(search_tbl, tbl, sz);
1550 search_tbl->is_SGI = 0;
1552 if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB)
1553 search_tbl->ant_type = ANT_AB;
1554 else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC)
1555 search_tbl->ant_type = ANT_AC;
1556 else
1557 search_tbl->ant_type = ANT_BC;
1559 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1560 break;
1562 ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
1563 search_tbl, index);
1564 if (!ret) {
1565 lq_sta->action_counter = 0;
1566 goto out;
1568 break;
1570 case IWL_LEGACY_SWITCH_MIMO3_ABC:
1571 IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO3\n");
1573 /* Set up search table to try MIMO3 */
1574 memcpy(search_tbl, tbl, sz);
1575 search_tbl->is_SGI = 0;
1577 search_tbl->ant_type = ANT_ABC;
1579 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1580 break;
1582 ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
1583 search_tbl, index);
1584 if (!ret) {
1585 lq_sta->action_counter = 0;
1586 goto out;
1588 break;
1590 tbl->action++;
1591 if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
1592 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1594 if (tbl->action == start_action)
1595 break;
1598 search_tbl->lq_type = LQ_NONE;
1599 return 0;
1601 out:
1602 lq_sta->search_better_tbl = 1;
1603 tbl->action++;
1604 if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
1605 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1606 if (update_search_tbl_counter)
1607 search_tbl->action = tbl->action;
1608 return 0;
1613 * Try to switch to new modulation mode from SISO
1615 static int rs_move_siso_to_other(struct iwl_priv *priv,
1616 struct iwl_lq_sta *lq_sta,
1617 struct ieee80211_conf *conf,
1618 struct ieee80211_sta *sta, int index)
1620 u8 is_green = lq_sta->is_green;
1621 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1622 struct iwl_scale_tbl_info *search_tbl =
1623 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1624 struct iwl_rate_scale_data *window = &(tbl->win[index]);
1625 struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
1626 u32 sz = (sizeof(struct iwl_scale_tbl_info) -
1627 (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
1628 u8 start_action;
1629 u8 valid_tx_ant = hw_params(priv).valid_tx_ant;
1630 u8 tx_chains_num = hw_params(priv).tx_chains_num;
1631 u8 update_search_tbl_counter = 0;
1632 int ret;
1634 switch (priv->bt_traffic_load) {
1635 case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
1636 /* nothing */
1637 break;
1638 case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
1639 /* avoid antenna B unless MIMO */
1640 valid_tx_ant =
1641 first_antenna(hw_params(priv).valid_tx_ant);
1642 if (tbl->action == IWL_SISO_SWITCH_ANTENNA2)
1643 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1644 break;
1645 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
1646 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
1647 /* avoid antenna B and MIMO */
1648 valid_tx_ant =
1649 first_antenna(hw_params(priv).valid_tx_ant);
1650 if (tbl->action != IWL_SISO_SWITCH_ANTENNA1)
1651 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1652 break;
1653 default:
1654 IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
1655 break;
1658 if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
1659 tbl->action > IWL_SISO_SWITCH_ANTENNA2) {
1660 /* stay in SISO */
1661 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1664 /* configure as 1x1 if bt full concurrency */
1665 if (priv->bt_full_concurrent) {
1666 valid_tx_ant =
1667 first_antenna(hw_params(priv).valid_tx_ant);
1668 if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
1669 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1672 start_action = tbl->action;
1673 for (;;) {
1674 lq_sta->action_counter++;
1675 switch (tbl->action) {
1676 case IWL_SISO_SWITCH_ANTENNA1:
1677 case IWL_SISO_SWITCH_ANTENNA2:
1678 IWL_DEBUG_RATE(priv, "LQ: SISO toggle Antenna\n");
1679 if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 &&
1680 tx_chains_num <= 1) ||
1681 (tbl->action == IWL_SISO_SWITCH_ANTENNA2 &&
1682 tx_chains_num <= 2))
1683 break;
1685 if (window->success_ratio >= IWL_RS_GOOD_RATIO &&
1686 !priv->bt_full_concurrent &&
1687 priv->bt_traffic_load ==
1688 IWL_BT_COEX_TRAFFIC_LOAD_NONE)
1689 break;
1691 memcpy(search_tbl, tbl, sz);
1692 if (rs_toggle_antenna(valid_tx_ant,
1693 &search_tbl->current_rate, search_tbl)) {
1694 update_search_tbl_counter = 1;
1695 goto out;
1697 break;
1698 case IWL_SISO_SWITCH_MIMO2_AB:
1699 case IWL_SISO_SWITCH_MIMO2_AC:
1700 case IWL_SISO_SWITCH_MIMO2_BC:
1701 IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO2\n");
1702 memcpy(search_tbl, tbl, sz);
1703 search_tbl->is_SGI = 0;
1705 if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB)
1706 search_tbl->ant_type = ANT_AB;
1707 else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC)
1708 search_tbl->ant_type = ANT_AC;
1709 else
1710 search_tbl->ant_type = ANT_BC;
1712 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1713 break;
1715 ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
1716 search_tbl, index);
1717 if (!ret)
1718 goto out;
1719 break;
1720 case IWL_SISO_SWITCH_GI:
1721 if (!tbl->is_ht40 && !(ht_cap->cap &
1722 IEEE80211_HT_CAP_SGI_20))
1723 break;
1724 if (tbl->is_ht40 && !(ht_cap->cap &
1725 IEEE80211_HT_CAP_SGI_40))
1726 break;
1728 IWL_DEBUG_RATE(priv, "LQ: SISO toggle SGI/NGI\n");
1730 memcpy(search_tbl, tbl, sz);
1731 if (is_green) {
1732 if (!tbl->is_SGI)
1733 break;
1734 else
1735 IWL_ERR(priv,
1736 "SGI was set in GF+SISO\n");
1738 search_tbl->is_SGI = !tbl->is_SGI;
1739 rs_set_expected_tpt_table(lq_sta, search_tbl);
1740 if (tbl->is_SGI) {
1741 s32 tpt = lq_sta->last_tpt / 100;
1742 if (tpt >= search_tbl->expected_tpt[index])
1743 break;
1745 search_tbl->current_rate =
1746 rate_n_flags_from_tbl(priv, search_tbl,
1747 index, is_green);
1748 update_search_tbl_counter = 1;
1749 goto out;
1750 case IWL_SISO_SWITCH_MIMO3_ABC:
1751 IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO3\n");
1752 memcpy(search_tbl, tbl, sz);
1753 search_tbl->is_SGI = 0;
1754 search_tbl->ant_type = ANT_ABC;
1756 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1757 break;
1759 ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
1760 search_tbl, index);
1761 if (!ret)
1762 goto out;
1763 break;
1765 tbl->action++;
1766 if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
1767 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1769 if (tbl->action == start_action)
1770 break;
1772 search_tbl->lq_type = LQ_NONE;
1773 return 0;
1775 out:
1776 lq_sta->search_better_tbl = 1;
1777 tbl->action++;
1778 if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC)
1779 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1780 if (update_search_tbl_counter)
1781 search_tbl->action = tbl->action;
1783 return 0;
1787 * Try to switch to new modulation mode from MIMO2
1789 static int rs_move_mimo2_to_other(struct iwl_priv *priv,
1790 struct iwl_lq_sta *lq_sta,
1791 struct ieee80211_conf *conf,
1792 struct ieee80211_sta *sta, int index)
1794 s8 is_green = lq_sta->is_green;
1795 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1796 struct iwl_scale_tbl_info *search_tbl =
1797 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1798 struct iwl_rate_scale_data *window = &(tbl->win[index]);
1799 struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
1800 u32 sz = (sizeof(struct iwl_scale_tbl_info) -
1801 (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
1802 u8 start_action;
1803 u8 valid_tx_ant = hw_params(priv).valid_tx_ant;
1804 u8 tx_chains_num = hw_params(priv).tx_chains_num;
1805 u8 update_search_tbl_counter = 0;
1806 int ret;
1808 switch (priv->bt_traffic_load) {
1809 case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
1810 /* nothing */
1811 break;
1812 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
1813 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
1814 /* avoid antenna B and MIMO */
1815 if (tbl->action != IWL_MIMO2_SWITCH_SISO_A)
1816 tbl->action = IWL_MIMO2_SWITCH_SISO_A;
1817 break;
1818 case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
1819 /* avoid antenna B unless MIMO */
1820 if (tbl->action == IWL_MIMO2_SWITCH_SISO_B ||
1821 tbl->action == IWL_MIMO2_SWITCH_SISO_C)
1822 tbl->action = IWL_MIMO2_SWITCH_SISO_A;
1823 break;
1824 default:
1825 IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
1826 break;
1829 if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) &&
1830 (tbl->action < IWL_MIMO2_SWITCH_SISO_A ||
1831 tbl->action > IWL_MIMO2_SWITCH_SISO_C)) {
1832 /* switch in SISO */
1833 tbl->action = IWL_MIMO2_SWITCH_SISO_A;
1836 /* configure as 1x1 if bt full concurrency */
1837 if (priv->bt_full_concurrent &&
1838 (tbl->action < IWL_MIMO2_SWITCH_SISO_A ||
1839 tbl->action > IWL_MIMO2_SWITCH_SISO_C))
1840 tbl->action = IWL_MIMO2_SWITCH_SISO_A;
1842 start_action = tbl->action;
1843 for (;;) {
1844 lq_sta->action_counter++;
1845 switch (tbl->action) {
1846 case IWL_MIMO2_SWITCH_ANTENNA1:
1847 case IWL_MIMO2_SWITCH_ANTENNA2:
1848 IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle Antennas\n");
1850 if (tx_chains_num <= 2)
1851 break;
1853 if (window->success_ratio >= IWL_RS_GOOD_RATIO)
1854 break;
1856 memcpy(search_tbl, tbl, sz);
1857 if (rs_toggle_antenna(valid_tx_ant,
1858 &search_tbl->current_rate, search_tbl)) {
1859 update_search_tbl_counter = 1;
1860 goto out;
1862 break;
1863 case IWL_MIMO2_SWITCH_SISO_A:
1864 case IWL_MIMO2_SWITCH_SISO_B:
1865 case IWL_MIMO2_SWITCH_SISO_C:
1866 IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to SISO\n");
1868 /* Set up new search table for SISO */
1869 memcpy(search_tbl, tbl, sz);
1871 if (tbl->action == IWL_MIMO2_SWITCH_SISO_A)
1872 search_tbl->ant_type = ANT_A;
1873 else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B)
1874 search_tbl->ant_type = ANT_B;
1875 else
1876 search_tbl->ant_type = ANT_C;
1878 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1879 break;
1881 ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
1882 search_tbl, index);
1883 if (!ret)
1884 goto out;
1886 break;
1888 case IWL_MIMO2_SWITCH_GI:
1889 if (!tbl->is_ht40 && !(ht_cap->cap &
1890 IEEE80211_HT_CAP_SGI_20))
1891 break;
1892 if (tbl->is_ht40 && !(ht_cap->cap &
1893 IEEE80211_HT_CAP_SGI_40))
1894 break;
1896 IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle SGI/NGI\n");
1898 /* Set up new search table for MIMO2 */
1899 memcpy(search_tbl, tbl, sz);
1900 search_tbl->is_SGI = !tbl->is_SGI;
1901 rs_set_expected_tpt_table(lq_sta, search_tbl);
1903 * If active table already uses the fastest possible
1904 * modulation (dual stream with short guard interval),
1905 * and it's working well, there's no need to look
1906 * for a better type of modulation!
1908 if (tbl->is_SGI) {
1909 s32 tpt = lq_sta->last_tpt / 100;
1910 if (tpt >= search_tbl->expected_tpt[index])
1911 break;
1913 search_tbl->current_rate =
1914 rate_n_flags_from_tbl(priv, search_tbl,
1915 index, is_green);
1916 update_search_tbl_counter = 1;
1917 goto out;
1919 case IWL_MIMO2_SWITCH_MIMO3_ABC:
1920 IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to MIMO3\n");
1921 memcpy(search_tbl, tbl, sz);
1922 search_tbl->is_SGI = 0;
1923 search_tbl->ant_type = ANT_ABC;
1925 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1926 break;
1928 ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
1929 search_tbl, index);
1930 if (!ret)
1931 goto out;
1933 break;
1935 tbl->action++;
1936 if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
1937 tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
1939 if (tbl->action == start_action)
1940 break;
1942 search_tbl->lq_type = LQ_NONE;
1943 return 0;
1944 out:
1945 lq_sta->search_better_tbl = 1;
1946 tbl->action++;
1947 if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
1948 tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
1949 if (update_search_tbl_counter)
1950 search_tbl->action = tbl->action;
1952 return 0;
1957 * Try to switch to new modulation mode from MIMO3
1959 static int rs_move_mimo3_to_other(struct iwl_priv *priv,
1960 struct iwl_lq_sta *lq_sta,
1961 struct ieee80211_conf *conf,
1962 struct ieee80211_sta *sta, int index)
1964 s8 is_green = lq_sta->is_green;
1965 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1966 struct iwl_scale_tbl_info *search_tbl =
1967 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1968 struct iwl_rate_scale_data *window = &(tbl->win[index]);
1969 struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
1970 u32 sz = (sizeof(struct iwl_scale_tbl_info) -
1971 (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
1972 u8 start_action;
1973 u8 valid_tx_ant = hw_params(priv).valid_tx_ant;
1974 u8 tx_chains_num = hw_params(priv).tx_chains_num;
1975 int ret;
1976 u8 update_search_tbl_counter = 0;
1978 switch (priv->bt_traffic_load) {
1979 case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
1980 /* nothing */
1981 break;
1982 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
1983 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
1984 /* avoid antenna B and MIMO */
1985 if (tbl->action != IWL_MIMO3_SWITCH_SISO_A)
1986 tbl->action = IWL_MIMO3_SWITCH_SISO_A;
1987 break;
1988 case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
1989 /* avoid antenna B unless MIMO */
1990 if (tbl->action == IWL_MIMO3_SWITCH_SISO_B ||
1991 tbl->action == IWL_MIMO3_SWITCH_SISO_C)
1992 tbl->action = IWL_MIMO3_SWITCH_SISO_A;
1993 break;
1994 default:
1995 IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
1996 break;
1999 if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) &&
2000 (tbl->action < IWL_MIMO3_SWITCH_SISO_A ||
2001 tbl->action > IWL_MIMO3_SWITCH_SISO_C)) {
2002 /* switch in SISO */
2003 tbl->action = IWL_MIMO3_SWITCH_SISO_A;
2006 /* configure as 1x1 if bt full concurrency */
2007 if (priv->bt_full_concurrent &&
2008 (tbl->action < IWL_MIMO3_SWITCH_SISO_A ||
2009 tbl->action > IWL_MIMO3_SWITCH_SISO_C))
2010 tbl->action = IWL_MIMO3_SWITCH_SISO_A;
2012 start_action = tbl->action;
2013 for (;;) {
2014 lq_sta->action_counter++;
2015 switch (tbl->action) {
2016 case IWL_MIMO3_SWITCH_ANTENNA1:
2017 case IWL_MIMO3_SWITCH_ANTENNA2:
2018 IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle Antennas\n");
2020 if (tx_chains_num <= 3)
2021 break;
2023 if (window->success_ratio >= IWL_RS_GOOD_RATIO)
2024 break;
2026 memcpy(search_tbl, tbl, sz);
2027 if (rs_toggle_antenna(valid_tx_ant,
2028 &search_tbl->current_rate, search_tbl))
2029 goto out;
2030 break;
2031 case IWL_MIMO3_SWITCH_SISO_A:
2032 case IWL_MIMO3_SWITCH_SISO_B:
2033 case IWL_MIMO3_SWITCH_SISO_C:
2034 IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to SISO\n");
2036 /* Set up new search table for SISO */
2037 memcpy(search_tbl, tbl, sz);
2039 if (tbl->action == IWL_MIMO3_SWITCH_SISO_A)
2040 search_tbl->ant_type = ANT_A;
2041 else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B)
2042 search_tbl->ant_type = ANT_B;
2043 else
2044 search_tbl->ant_type = ANT_C;
2046 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
2047 break;
2049 ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
2050 search_tbl, index);
2051 if (!ret)
2052 goto out;
2054 break;
2056 case IWL_MIMO3_SWITCH_MIMO2_AB:
2057 case IWL_MIMO3_SWITCH_MIMO2_AC:
2058 case IWL_MIMO3_SWITCH_MIMO2_BC:
2059 IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to MIMO2\n");
2061 memcpy(search_tbl, tbl, sz);
2062 search_tbl->is_SGI = 0;
2063 if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB)
2064 search_tbl->ant_type = ANT_AB;
2065 else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC)
2066 search_tbl->ant_type = ANT_AC;
2067 else
2068 search_tbl->ant_type = ANT_BC;
2070 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
2071 break;
2073 ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
2074 search_tbl, index);
2075 if (!ret)
2076 goto out;
2078 break;
2080 case IWL_MIMO3_SWITCH_GI:
2081 if (!tbl->is_ht40 && !(ht_cap->cap &
2082 IEEE80211_HT_CAP_SGI_20))
2083 break;
2084 if (tbl->is_ht40 && !(ht_cap->cap &
2085 IEEE80211_HT_CAP_SGI_40))
2086 break;
2088 IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n");
2090 /* Set up new search table for MIMO */
2091 memcpy(search_tbl, tbl, sz);
2092 search_tbl->is_SGI = !tbl->is_SGI;
2093 rs_set_expected_tpt_table(lq_sta, search_tbl);
2095 * If active table already uses the fastest possible
2096 * modulation (dual stream with short guard interval),
2097 * and it's working well, there's no need to look
2098 * for a better type of modulation!
2100 if (tbl->is_SGI) {
2101 s32 tpt = lq_sta->last_tpt / 100;
2102 if (tpt >= search_tbl->expected_tpt[index])
2103 break;
2105 search_tbl->current_rate =
2106 rate_n_flags_from_tbl(priv, search_tbl,
2107 index, is_green);
2108 update_search_tbl_counter = 1;
2109 goto out;
2111 tbl->action++;
2112 if (tbl->action > IWL_MIMO3_SWITCH_GI)
2113 tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
2115 if (tbl->action == start_action)
2116 break;
2118 search_tbl->lq_type = LQ_NONE;
2119 return 0;
2120 out:
2121 lq_sta->search_better_tbl = 1;
2122 tbl->action++;
2123 if (tbl->action > IWL_MIMO3_SWITCH_GI)
2124 tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
2125 if (update_search_tbl_counter)
2126 search_tbl->action = tbl->action;
2128 return 0;
2133 * Check whether we should continue using same modulation mode, or
2134 * begin search for a new mode, based on:
2135 * 1) # tx successes or failures while using this mode
2136 * 2) # times calling this function
2137 * 3) elapsed time in this mode (not used, for now)
2139 static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
2141 struct iwl_scale_tbl_info *tbl;
2142 int i;
2143 int active_tbl;
2144 int flush_interval_passed = 0;
2145 struct iwl_priv *priv;
2147 priv = lq_sta->drv;
2148 active_tbl = lq_sta->active_tbl;
2150 tbl = &(lq_sta->lq_info[active_tbl]);
2152 /* If we've been disallowing search, see if we should now allow it */
2153 if (lq_sta->stay_in_tbl) {
2155 /* Elapsed time using current modulation mode */
2156 if (lq_sta->flush_timer)
2157 flush_interval_passed =
2158 time_after(jiffies,
2159 (unsigned long)(lq_sta->flush_timer +
2160 IWL_RATE_SCALE_FLUSH_INTVL));
2163 * Check if we should allow search for new modulation mode.
2164 * If many frames have failed or succeeded, or we've used
2165 * this same modulation for a long time, allow search, and
2166 * reset history stats that keep track of whether we should
2167 * allow a new search. Also (below) reset all bitmaps and
2168 * stats in active history.
2170 if (force_search ||
2171 (lq_sta->total_failed > lq_sta->max_failure_limit) ||
2172 (lq_sta->total_success > lq_sta->max_success_limit) ||
2173 ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
2174 && (flush_interval_passed))) {
2175 IWL_DEBUG_RATE(priv, "LQ: stay is expired %d %d %d\n:",
2176 lq_sta->total_failed,
2177 lq_sta->total_success,
2178 flush_interval_passed);
2180 /* Allow search for new mode */
2181 lq_sta->stay_in_tbl = 0; /* only place reset */
2182 lq_sta->total_failed = 0;
2183 lq_sta->total_success = 0;
2184 lq_sta->flush_timer = 0;
2187 * Else if we've used this modulation mode enough repetitions
2188 * (regardless of elapsed time or success/failure), reset
2189 * history bitmaps and rate-specific stats for all rates in
2190 * active table.
2192 } else {
2193 lq_sta->table_count++;
2194 if (lq_sta->table_count >=
2195 lq_sta->table_count_limit) {
2196 lq_sta->table_count = 0;
2198 IWL_DEBUG_RATE(priv, "LQ: stay in table clear win\n");
2199 for (i = 0; i < IWL_RATE_COUNT; i++)
2200 rs_rate_scale_clear_window(
2201 &(tbl->win[i]));
2205 /* If transitioning to allow "search", reset all history
2206 * bitmaps and stats in active table (this will become the new
2207 * "search" table). */
2208 if (!lq_sta->stay_in_tbl) {
2209 for (i = 0; i < IWL_RATE_COUNT; i++)
2210 rs_rate_scale_clear_window(&(tbl->win[i]));
2216 * setup rate table in uCode
2217 * return rate_n_flags as used in the table
2219 static void rs_update_rate_tbl(struct iwl_priv *priv,
2220 struct iwl_rxon_context *ctx,
2221 struct iwl_lq_sta *lq_sta,
2222 struct iwl_scale_tbl_info *tbl,
2223 int index, u8 is_green)
2225 u32 rate;
2227 /* Update uCode's rate table. */
2228 rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
2229 rs_fill_link_cmd(priv, lq_sta, rate);
2230 iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
2234 * Do rate scaling and search for new modulation mode.
2236 static void rs_rate_scale_perform(struct iwl_priv *priv,
2237 struct sk_buff *skb,
2238 struct ieee80211_sta *sta,
2239 struct iwl_lq_sta *lq_sta)
2241 struct ieee80211_hw *hw = priv->hw;
2242 struct ieee80211_conf *conf = &hw->conf;
2243 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2244 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
2245 int low = IWL_RATE_INVALID;
2246 int high = IWL_RATE_INVALID;
2247 int index;
2248 int i;
2249 struct iwl_rate_scale_data *window = NULL;
2250 int current_tpt = IWL_INVALID_VALUE;
2251 int low_tpt = IWL_INVALID_VALUE;
2252 int high_tpt = IWL_INVALID_VALUE;
2253 u32 fail_count;
2254 s8 scale_action = 0;
2255 u16 rate_mask;
2256 u8 update_lq = 0;
2257 struct iwl_scale_tbl_info *tbl, *tbl1;
2258 u16 rate_scale_index_msk = 0;
2259 u8 is_green = 0;
2260 u8 active_tbl = 0;
2261 u8 done_search = 0;
2262 u16 high_low;
2263 s32 sr;
2264 u8 tid = MAX_TID_COUNT;
2265 struct iwl_tid_data *tid_data;
2266 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
2267 struct iwl_rxon_context *ctx = sta_priv->common.ctx;
2269 IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n");
2271 /* Send management frames and NO_ACK data using lowest rate. */
2272 /* TODO: this could probably be improved.. */
2273 if (!ieee80211_is_data(hdr->frame_control) ||
2274 info->flags & IEEE80211_TX_CTL_NO_ACK)
2275 return;
2277 if (!sta || !lq_sta)
2278 return;
2280 lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
2282 tid = rs_tl_add_packet(lq_sta, hdr);
2283 if ((tid != MAX_TID_COUNT) && (lq_sta->tx_agg_tid_en & (1 << tid))) {
2284 tid_data = &priv->stations[lq_sta->lq.sta_id].tid[tid];
2285 if (tid_data->agg.state == IWL_AGG_OFF)
2286 lq_sta->is_agg = 0;
2287 else
2288 lq_sta->is_agg = 1;
2289 } else
2290 lq_sta->is_agg = 0;
2293 * Select rate-scale / modulation-mode table to work with in
2294 * the rest of this function: "search" if searching for better
2295 * modulation mode, or "active" if doing rate scaling within a mode.
2297 if (!lq_sta->search_better_tbl)
2298 active_tbl = lq_sta->active_tbl;
2299 else
2300 active_tbl = 1 - lq_sta->active_tbl;
2302 tbl = &(lq_sta->lq_info[active_tbl]);
2303 if (is_legacy(tbl->lq_type))
2304 lq_sta->is_green = 0;
2305 else
2306 lq_sta->is_green = rs_use_green(sta);
2307 is_green = lq_sta->is_green;
2309 /* current tx rate */
2310 index = lq_sta->last_txrate_idx;
2312 IWL_DEBUG_RATE(priv, "Rate scale index %d for type %d\n", index,
2313 tbl->lq_type);
2315 /* rates available for this association, and for modulation mode */
2316 rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
2318 IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask);
2320 /* mask with station rate restriction */
2321 if (is_legacy(tbl->lq_type)) {
2322 if (lq_sta->band == IEEE80211_BAND_5GHZ)
2323 /* supp_rates has no CCK bits in A mode */
2324 rate_scale_index_msk = (u16) (rate_mask &
2325 (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
2326 else
2327 rate_scale_index_msk = (u16) (rate_mask &
2328 lq_sta->supp_rates);
2330 } else
2331 rate_scale_index_msk = rate_mask;
2333 if (!rate_scale_index_msk)
2334 rate_scale_index_msk = rate_mask;
2336 if (!((1 << index) & rate_scale_index_msk)) {
2337 IWL_ERR(priv, "Current Rate is not valid\n");
2338 if (lq_sta->search_better_tbl) {
2339 /* revert to active table if search table is not valid*/
2340 tbl->lq_type = LQ_NONE;
2341 lq_sta->search_better_tbl = 0;
2342 tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
2343 /* get "active" rate info */
2344 index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
2345 rs_update_rate_tbl(priv, ctx, lq_sta, tbl,
2346 index, is_green);
2348 return;
2351 /* Get expected throughput table and history window for current rate */
2352 if (!tbl->expected_tpt) {
2353 IWL_ERR(priv, "tbl->expected_tpt is NULL\n");
2354 return;
2357 /* force user max rate if set by user */
2358 if ((lq_sta->max_rate_idx != -1) &&
2359 (lq_sta->max_rate_idx < index)) {
2360 index = lq_sta->max_rate_idx;
2361 update_lq = 1;
2362 window = &(tbl->win[index]);
2363 goto lq_update;
2366 window = &(tbl->win[index]);
2369 * If there is not enough history to calculate actual average
2370 * throughput, keep analyzing results of more tx frames, without
2371 * changing rate or mode (bypass most of the rest of this function).
2372 * Set up new rate table in uCode only if old rate is not supported
2373 * in current association (use new rate found above).
2375 fail_count = window->counter - window->success_counter;
2376 if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
2377 (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
2378 IWL_DEBUG_RATE(priv, "LQ: still below TH. succ=%d total=%d "
2379 "for index %d\n",
2380 window->success_counter, window->counter, index);
2382 /* Can't calculate this yet; not enough history */
2383 window->average_tpt = IWL_INVALID_VALUE;
2385 /* Should we stay with this modulation mode,
2386 * or search for a new one? */
2387 rs_stay_in_table(lq_sta, false);
2389 goto out;
2391 /* Else we have enough samples; calculate estimate of
2392 * actual average throughput */
2393 if (window->average_tpt != ((window->success_ratio *
2394 tbl->expected_tpt[index] + 64) / 128)) {
2395 IWL_ERR(priv, "expected_tpt should have been calculated by now\n");
2396 window->average_tpt = ((window->success_ratio *
2397 tbl->expected_tpt[index] + 64) / 128);
2400 /* If we are searching for better modulation mode, check success. */
2401 if (lq_sta->search_better_tbl &&
2402 (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI)) {
2403 /* If good success, continue using the "search" mode;
2404 * no need to send new link quality command, since we're
2405 * continuing to use the setup that we've been trying. */
2406 if (window->average_tpt > lq_sta->last_tpt) {
2408 IWL_DEBUG_RATE(priv, "LQ: SWITCHING TO NEW TABLE "
2409 "suc=%d cur-tpt=%d old-tpt=%d\n",
2410 window->success_ratio,
2411 window->average_tpt,
2412 lq_sta->last_tpt);
2414 if (!is_legacy(tbl->lq_type))
2415 lq_sta->enable_counter = 1;
2417 /* Swap tables; "search" becomes "active" */
2418 lq_sta->active_tbl = active_tbl;
2419 current_tpt = window->average_tpt;
2421 /* Else poor success; go back to mode in "active" table */
2422 } else {
2424 IWL_DEBUG_RATE(priv, "LQ: GOING BACK TO THE OLD TABLE "
2425 "suc=%d cur-tpt=%d old-tpt=%d\n",
2426 window->success_ratio,
2427 window->average_tpt,
2428 lq_sta->last_tpt);
2430 /* Nullify "search" table */
2431 tbl->lq_type = LQ_NONE;
2433 /* Revert to "active" table */
2434 active_tbl = lq_sta->active_tbl;
2435 tbl = &(lq_sta->lq_info[active_tbl]);
2437 /* Revert to "active" rate and throughput info */
2438 index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
2439 current_tpt = lq_sta->last_tpt;
2441 /* Need to set up a new rate table in uCode */
2442 update_lq = 1;
2445 /* Either way, we've made a decision; modulation mode
2446 * search is done, allow rate adjustment next time. */
2447 lq_sta->search_better_tbl = 0;
2448 done_search = 1; /* Don't switch modes below! */
2449 goto lq_update;
2452 /* (Else) not in search of better modulation mode, try for better
2453 * starting rate, while staying in this mode. */
2454 high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk,
2455 tbl->lq_type);
2456 low = high_low & 0xff;
2457 high = (high_low >> 8) & 0xff;
2459 /* If user set max rate, dont allow higher than user constrain */
2460 if ((lq_sta->max_rate_idx != -1) &&
2461 (lq_sta->max_rate_idx < high))
2462 high = IWL_RATE_INVALID;
2464 sr = window->success_ratio;
2466 /* Collect measured throughputs for current and adjacent rates */
2467 current_tpt = window->average_tpt;
2468 if (low != IWL_RATE_INVALID)
2469 low_tpt = tbl->win[low].average_tpt;
2470 if (high != IWL_RATE_INVALID)
2471 high_tpt = tbl->win[high].average_tpt;
2473 scale_action = 0;
2475 /* Too many failures, decrease rate */
2476 if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) {
2477 IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n");
2478 scale_action = -1;
2480 /* No throughput measured yet for adjacent rates; try increase. */
2481 } else if ((low_tpt == IWL_INVALID_VALUE) &&
2482 (high_tpt == IWL_INVALID_VALUE)) {
2484 if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH)
2485 scale_action = 1;
2486 else if (low != IWL_RATE_INVALID)
2487 scale_action = 0;
2490 /* Both adjacent throughputs are measured, but neither one has better
2491 * throughput; we're using the best rate, don't change it! */
2492 else if ((low_tpt != IWL_INVALID_VALUE) &&
2493 (high_tpt != IWL_INVALID_VALUE) &&
2494 (low_tpt < current_tpt) &&
2495 (high_tpt < current_tpt))
2496 scale_action = 0;
2498 /* At least one adjacent rate's throughput is measured,
2499 * and may have better performance. */
2500 else {
2501 /* Higher adjacent rate's throughput is measured */
2502 if (high_tpt != IWL_INVALID_VALUE) {
2503 /* Higher rate has better throughput */
2504 if (high_tpt > current_tpt &&
2505 sr >= IWL_RATE_INCREASE_TH) {
2506 scale_action = 1;
2507 } else {
2508 scale_action = 0;
2511 /* Lower adjacent rate's throughput is measured */
2512 } else if (low_tpt != IWL_INVALID_VALUE) {
2513 /* Lower rate has better throughput */
2514 if (low_tpt > current_tpt) {
2515 IWL_DEBUG_RATE(priv,
2516 "decrease rate because of low tpt\n");
2517 scale_action = -1;
2518 } else if (sr >= IWL_RATE_INCREASE_TH) {
2519 scale_action = 1;
2524 /* Sanity check; asked for decrease, but success rate or throughput
2525 * has been good at old rate. Don't change it. */
2526 if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
2527 ((sr > IWL_RATE_HIGH_TH) ||
2528 (current_tpt > (100 * tbl->expected_tpt[low]))))
2529 scale_action = 0;
2530 if (!iwl_ht_enabled(priv) && !is_legacy(tbl->lq_type))
2531 scale_action = -1;
2532 if (iwl_tx_ant_restriction(priv) != IWL_ANT_OK_MULTI &&
2533 (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type)))
2534 scale_action = -1;
2536 if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) &&
2537 (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) {
2538 if (lq_sta->last_bt_traffic > priv->bt_traffic_load) {
2540 * don't set scale_action, don't want to scale up if
2541 * the rate scale doesn't otherwise think that is a
2542 * good idea.
2544 } else if (lq_sta->last_bt_traffic <= priv->bt_traffic_load) {
2545 scale_action = -1;
2548 lq_sta->last_bt_traffic = priv->bt_traffic_load;
2550 if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) &&
2551 (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) {
2552 /* search for a new modulation */
2553 rs_stay_in_table(lq_sta, true);
2554 goto lq_update;
2557 switch (scale_action) {
2558 case -1:
2559 /* Decrease starting rate, update uCode's rate table */
2560 if (low != IWL_RATE_INVALID) {
2561 update_lq = 1;
2562 index = low;
2565 break;
2566 case 1:
2567 /* Increase starting rate, update uCode's rate table */
2568 if (high != IWL_RATE_INVALID) {
2569 update_lq = 1;
2570 index = high;
2573 break;
2574 case 0:
2575 /* No change */
2576 default:
2577 break;
2580 IWL_DEBUG_RATE(priv, "choose rate scale index %d action %d low %d "
2581 "high %d type %d\n",
2582 index, scale_action, low, high, tbl->lq_type);
2584 lq_update:
2585 /* Replace uCode's rate table for the destination station. */
2586 if (update_lq)
2587 rs_update_rate_tbl(priv, ctx, lq_sta, tbl, index, is_green);
2589 if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI) {
2590 /* Should we stay with this modulation mode,
2591 * or search for a new one? */
2592 rs_stay_in_table(lq_sta, false);
2595 * Search for new modulation mode if we're:
2596 * 1) Not changing rates right now
2597 * 2) Not just finishing up a search
2598 * 3) Allowing a new search
2600 if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
2601 /* Save current throughput to compare with "search" throughput*/
2602 lq_sta->last_tpt = current_tpt;
2604 /* Select a new "search" modulation mode to try.
2605 * If one is found, set up the new "search" table. */
2606 if (is_legacy(tbl->lq_type))
2607 rs_move_legacy_other(priv, lq_sta, conf, sta, index);
2608 else if (is_siso(tbl->lq_type))
2609 rs_move_siso_to_other(priv, lq_sta, conf, sta, index);
2610 else if (is_mimo2(tbl->lq_type))
2611 rs_move_mimo2_to_other(priv, lq_sta, conf, sta, index);
2612 else
2613 rs_move_mimo3_to_other(priv, lq_sta, conf, sta, index);
2615 /* If new "search" mode was selected, set up in uCode table */
2616 if (lq_sta->search_better_tbl) {
2617 /* Access the "search" table, clear its history. */
2618 tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
2619 for (i = 0; i < IWL_RATE_COUNT; i++)
2620 rs_rate_scale_clear_window(&(tbl->win[i]));
2622 /* Use new "search" start rate */
2623 index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
2625 IWL_DEBUG_RATE(priv, "Switch current mcs: %X index: %d\n",
2626 tbl->current_rate, index);
2627 rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
2628 iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
2629 } else
2630 done_search = 1;
2633 if (done_search && !lq_sta->stay_in_tbl) {
2634 /* If the "active" (non-search) mode was legacy,
2635 * and we've tried switching antennas,
2636 * but we haven't been able to try HT modes (not available),
2637 * stay with best antenna legacy modulation for a while
2638 * before next round of mode comparisons. */
2639 tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
2640 if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) &&
2641 lq_sta->action_counter > tbl1->max_search) {
2642 IWL_DEBUG_RATE(priv, "LQ: STAY in legacy table\n");
2643 rs_set_stay_in_table(priv, 1, lq_sta);
2646 /* If we're in an HT mode, and all 3 mode switch actions
2647 * have been tried and compared, stay in this best modulation
2648 * mode for a while before next round of mode comparisons. */
2649 if (lq_sta->enable_counter &&
2650 (lq_sta->action_counter >= tbl1->max_search) &&
2651 iwl_ht_enabled(priv)) {
2652 if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
2653 (lq_sta->tx_agg_tid_en & (1 << tid)) &&
2654 (tid != MAX_TID_COUNT)) {
2655 tid_data =
2656 &priv->stations[lq_sta->lq.sta_id].tid[tid];
2657 if (tid_data->agg.state == IWL_AGG_OFF) {
2658 IWL_DEBUG_RATE(priv,
2659 "try to aggregate tid %d\n",
2660 tid);
2661 rs_tl_turn_on_agg(priv, tid,
2662 lq_sta, sta);
2665 rs_set_stay_in_table(priv, 0, lq_sta);
2669 out:
2670 tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
2671 i = index;
2672 lq_sta->last_txrate_idx = i;
2676 * rs_initialize_lq - Initialize a station's hardware rate table
2678 * The uCode's station table contains a table of fallback rates
2679 * for automatic fallback during transmission.
2681 * NOTE: This sets up a default set of values. These will be replaced later
2682 * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of
2683 * rc80211_simple.
2685 * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
2686 * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
2687 * which requires station table entry to exist).
2689 static void rs_initialize_lq(struct iwl_priv *priv,
2690 struct ieee80211_conf *conf,
2691 struct ieee80211_sta *sta,
2692 struct iwl_lq_sta *lq_sta)
2694 struct iwl_scale_tbl_info *tbl;
2695 int rate_idx;
2696 int i;
2697 u32 rate;
2698 u8 use_green = rs_use_green(sta);
2699 u8 active_tbl = 0;
2700 u8 valid_tx_ant;
2701 struct iwl_station_priv *sta_priv;
2702 struct iwl_rxon_context *ctx;
2704 if (!sta || !lq_sta)
2705 return;
2707 sta_priv = (void *)sta->drv_priv;
2708 ctx = sta_priv->common.ctx;
2710 i = lq_sta->last_txrate_idx;
2712 valid_tx_ant = hw_params(priv).valid_tx_ant;
2714 if (!lq_sta->search_better_tbl)
2715 active_tbl = lq_sta->active_tbl;
2716 else
2717 active_tbl = 1 - lq_sta->active_tbl;
2719 tbl = &(lq_sta->lq_info[active_tbl]);
2721 if ((i < 0) || (i >= IWL_RATE_COUNT))
2722 i = 0;
2724 rate = iwl_rates[i].plcp;
2725 tbl->ant_type = first_antenna(valid_tx_ant);
2726 rate |= tbl->ant_type << RATE_MCS_ANT_POS;
2728 if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE)
2729 rate |= RATE_MCS_CCK_MSK;
2731 rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx);
2732 if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type))
2733 rs_toggle_antenna(valid_tx_ant, &rate, tbl);
2735 rate = rate_n_flags_from_tbl(priv, tbl, rate_idx, use_green);
2736 tbl->current_rate = rate;
2737 rs_set_expected_tpt_table(lq_sta, tbl);
2738 rs_fill_link_cmd(NULL, lq_sta, rate);
2739 priv->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq;
2740 iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_SYNC, true);
2743 static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
2744 struct ieee80211_tx_rate_control *txrc)
2747 struct sk_buff *skb = txrc->skb;
2748 struct ieee80211_supported_band *sband = txrc->sband;
2749 struct iwl_priv *priv __maybe_unused = (struct iwl_priv *)priv_r;
2750 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2751 struct iwl_lq_sta *lq_sta = priv_sta;
2752 int rate_idx;
2754 IWL_DEBUG_RATE_LIMIT(priv, "rate scale calculate new rate for skb\n");
2756 /* Get max rate if user set max rate */
2757 if (lq_sta) {
2758 lq_sta->max_rate_idx = txrc->max_rate_idx;
2759 if ((sband->band == IEEE80211_BAND_5GHZ) &&
2760 (lq_sta->max_rate_idx != -1))
2761 lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE;
2762 if ((lq_sta->max_rate_idx < 0) ||
2763 (lq_sta->max_rate_idx >= IWL_RATE_COUNT))
2764 lq_sta->max_rate_idx = -1;
2767 /* Treat uninitialized rate scaling data same as non-existing. */
2768 if (lq_sta && !lq_sta->drv) {
2769 IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
2770 priv_sta = NULL;
2773 /* Send management frames and NO_ACK data using lowest rate. */
2774 if (rate_control_send_low(sta, priv_sta, txrc))
2775 return;
2777 rate_idx = lq_sta->last_txrate_idx;
2779 if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) {
2780 rate_idx -= IWL_FIRST_OFDM_RATE;
2781 /* 6M and 9M shared same MCS index */
2782 rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0;
2783 if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
2784 IWL_RATE_MIMO3_6M_PLCP)
2785 rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM);
2786 else if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
2787 IWL_RATE_MIMO2_6M_PLCP)
2788 rate_idx = rate_idx + MCS_INDEX_PER_STREAM;
2789 info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
2790 if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK)
2791 info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI;
2792 if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK)
2793 info->control.rates[0].flags |= IEEE80211_TX_RC_DUP_DATA;
2794 if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK)
2795 info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
2796 if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK)
2797 info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD;
2798 } else {
2799 /* Check for invalid rates */
2800 if ((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT_LEGACY) ||
2801 ((sband->band == IEEE80211_BAND_5GHZ) &&
2802 (rate_idx < IWL_FIRST_OFDM_RATE)))
2803 rate_idx = rate_lowest_index(sband, sta);
2804 /* On valid 5 GHz rate, adjust index */
2805 else if (sband->band == IEEE80211_BAND_5GHZ)
2806 rate_idx -= IWL_FIRST_OFDM_RATE;
2807 info->control.rates[0].flags = 0;
2809 info->control.rates[0].idx = rate_idx;
2813 static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta,
2814 gfp_t gfp)
2816 struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv;
2817 struct iwl_priv *priv;
2819 priv = (struct iwl_priv *)priv_rate;
2820 IWL_DEBUG_RATE(priv, "create station rate scale window\n");
2822 return &sta_priv->lq_sta;
2826 * Called after adding a new station to initialize rate scaling
2828 void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id)
2830 int i, j;
2831 struct ieee80211_hw *hw = priv->hw;
2832 struct ieee80211_conf *conf = &priv->hw->conf;
2833 struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
2834 struct iwl_station_priv *sta_priv;
2835 struct iwl_lq_sta *lq_sta;
2836 struct ieee80211_supported_band *sband;
2838 sta_priv = (struct iwl_station_priv *) sta->drv_priv;
2839 lq_sta = &sta_priv->lq_sta;
2840 sband = hw->wiphy->bands[conf->channel->band];
2843 lq_sta->lq.sta_id = sta_id;
2845 for (j = 0; j < LQ_SIZE; j++)
2846 for (i = 0; i < IWL_RATE_COUNT; i++)
2847 rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
2849 lq_sta->flush_timer = 0;
2850 lq_sta->supp_rates = sta->supp_rates[sband->band];
2851 for (j = 0; j < LQ_SIZE; j++)
2852 for (i = 0; i < IWL_RATE_COUNT; i++)
2853 rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
2855 IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init for station %d ***\n",
2856 sta_id);
2857 /* TODO: what is a good starting rate for STA? About middle? Maybe not
2858 * the lowest or the highest rate.. Could consider using RSSI from
2859 * previous packets? Need to have IEEE 802.1X auth succeed immediately
2860 * after assoc.. */
2862 lq_sta->is_dup = 0;
2863 lq_sta->max_rate_idx = -1;
2864 lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX;
2865 lq_sta->is_green = rs_use_green(sta);
2866 lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000);
2867 lq_sta->band = priv->band;
2869 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
2870 * supp_rates[] does not; shift to convert format, force 9 MBits off.
2872 lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1;
2873 lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1;
2874 lq_sta->active_siso_rate &= ~((u16)0x2);
2875 lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE;
2877 /* Same here */
2878 lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1;
2879 lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1;
2880 lq_sta->active_mimo2_rate &= ~((u16)0x2);
2881 lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
2883 lq_sta->active_mimo3_rate = ht_cap->mcs.rx_mask[2] << 1;
2884 lq_sta->active_mimo3_rate |= ht_cap->mcs.rx_mask[2] & 0x1;
2885 lq_sta->active_mimo3_rate &= ~((u16)0x2);
2886 lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
2888 IWL_DEBUG_RATE(priv, "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
2889 lq_sta->active_siso_rate,
2890 lq_sta->active_mimo2_rate,
2891 lq_sta->active_mimo3_rate);
2893 /* These values will be overridden later */
2894 lq_sta->lq.general_params.single_stream_ant_msk =
2895 first_antenna(hw_params(priv).valid_tx_ant);
2896 lq_sta->lq.general_params.dual_stream_ant_msk =
2897 hw_params(priv).valid_tx_ant &
2898 ~first_antenna(hw_params(priv).valid_tx_ant);
2899 if (!lq_sta->lq.general_params.dual_stream_ant_msk) {
2900 lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
2901 } else if (num_of_ant(hw_params(priv).valid_tx_ant) == 2) {
2902 lq_sta->lq.general_params.dual_stream_ant_msk =
2903 hw_params(priv).valid_tx_ant;
2906 /* as default allow aggregation for all tids */
2907 lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
2908 lq_sta->drv = priv;
2910 /* Set last_txrate_idx to lowest rate */
2911 lq_sta->last_txrate_idx = rate_lowest_index(sband, sta);
2912 if (sband->band == IEEE80211_BAND_5GHZ)
2913 lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
2914 lq_sta->is_agg = 0;
2915 #ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
2916 priv->tm_fixed_rate = 0;
2917 #endif
2918 #ifdef CONFIG_MAC80211_DEBUGFS
2919 lq_sta->dbg_fixed_rate = 0;
2920 #endif
2922 rs_initialize_lq(priv, conf, sta, lq_sta);
2925 static void rs_fill_link_cmd(struct iwl_priv *priv,
2926 struct iwl_lq_sta *lq_sta, u32 new_rate)
2928 struct iwl_scale_tbl_info tbl_type;
2929 int index = 0;
2930 int rate_idx;
2931 int repeat_rate = 0;
2932 u8 ant_toggle_cnt = 0;
2933 u8 use_ht_possible = 1;
2934 u8 valid_tx_ant = 0;
2935 struct iwl_station_priv *sta_priv =
2936 container_of(lq_sta, struct iwl_station_priv, lq_sta);
2937 struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq;
2939 /* Override starting rate (index 0) if needed for debug purposes */
2940 rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
2942 /* Interpret new_rate (rate_n_flags) */
2943 rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
2944 &tbl_type, &rate_idx);
2946 if (priv && priv->bt_full_concurrent) {
2947 /* 1x1 only */
2948 tbl_type.ant_type =
2949 first_antenna(hw_params(priv).valid_tx_ant);
2952 /* How many times should we repeat the initial rate? */
2953 if (is_legacy(tbl_type.lq_type)) {
2954 ant_toggle_cnt = 1;
2955 repeat_rate = IWL_NUMBER_TRY;
2956 } else {
2957 repeat_rate = min(IWL_HT_NUMBER_TRY,
2958 LINK_QUAL_AGG_DISABLE_START_DEF - 1);
2961 lq_cmd->general_params.mimo_delimiter =
2962 is_mimo(tbl_type.lq_type) ? 1 : 0;
2964 /* Fill 1st table entry (index 0) */
2965 lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
2967 if (num_of_ant(tbl_type.ant_type) == 1) {
2968 lq_cmd->general_params.single_stream_ant_msk =
2969 tbl_type.ant_type;
2970 } else if (num_of_ant(tbl_type.ant_type) == 2) {
2971 lq_cmd->general_params.dual_stream_ant_msk =
2972 tbl_type.ant_type;
2973 } /* otherwise we don't modify the existing value */
2975 index++;
2976 repeat_rate--;
2977 if (priv) {
2978 if (priv->bt_full_concurrent)
2979 valid_tx_ant = ANT_A;
2980 else
2981 valid_tx_ant = hw_params(priv).valid_tx_ant;
2984 /* Fill rest of rate table */
2985 while (index < LINK_QUAL_MAX_RETRY_NUM) {
2986 /* Repeat initial/next rate.
2987 * For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
2988 * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
2989 while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) {
2990 if (is_legacy(tbl_type.lq_type)) {
2991 if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
2992 ant_toggle_cnt++;
2993 else if (priv &&
2994 rs_toggle_antenna(valid_tx_ant,
2995 &new_rate, &tbl_type))
2996 ant_toggle_cnt = 1;
2999 /* Override next rate if needed for debug purposes */
3000 rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
3002 /* Fill next table entry */
3003 lq_cmd->rs_table[index].rate_n_flags =
3004 cpu_to_le32(new_rate);
3005 repeat_rate--;
3006 index++;
3009 rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type,
3010 &rate_idx);
3012 if (priv && priv->bt_full_concurrent) {
3013 /* 1x1 only */
3014 tbl_type.ant_type =
3015 first_antenna(hw_params(priv).valid_tx_ant);
3018 /* Indicate to uCode which entries might be MIMO.
3019 * If initial rate was MIMO, this will finally end up
3020 * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
3021 if (is_mimo(tbl_type.lq_type))
3022 lq_cmd->general_params.mimo_delimiter = index;
3024 /* Get next rate */
3025 new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
3026 use_ht_possible);
3028 /* How many times should we repeat the next rate? */
3029 if (is_legacy(tbl_type.lq_type)) {
3030 if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
3031 ant_toggle_cnt++;
3032 else if (priv &&
3033 rs_toggle_antenna(valid_tx_ant,
3034 &new_rate, &tbl_type))
3035 ant_toggle_cnt = 1;
3037 repeat_rate = IWL_NUMBER_TRY;
3038 } else {
3039 repeat_rate = IWL_HT_NUMBER_TRY;
3042 /* Don't allow HT rates after next pass.
3043 * rs_get_lower_rate() will change type to LQ_A or LQ_G. */
3044 use_ht_possible = 0;
3046 /* Override next rate if needed for debug purposes */
3047 rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
3049 /* Fill next table entry */
3050 lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
3052 index++;
3053 repeat_rate--;
3056 lq_cmd->agg_params.agg_frame_cnt_limit =
3057 sta_priv->max_agg_bufsize ?: LINK_QUAL_AGG_FRAME_LIMIT_DEF;
3058 lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
3060 lq_cmd->agg_params.agg_time_limit =
3061 cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
3063 * overwrite if needed, pass aggregation time limit
3064 * to uCode in uSec
3066 if (priv && priv->cfg->bt_params &&
3067 priv->cfg->bt_params->agg_time_limit &&
3068 priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)
3069 lq_cmd->agg_params.agg_time_limit =
3070 cpu_to_le16(priv->cfg->bt_params->agg_time_limit);
3073 static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
3075 return hw->priv;
3077 /* rate scale requires free function to be implemented */
3078 static void rs_free(void *priv_rate)
3080 return;
3083 static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta,
3084 void *priv_sta)
3086 struct iwl_priv *priv __maybe_unused = priv_r;
3088 IWL_DEBUG_RATE(priv, "enter\n");
3089 IWL_DEBUG_RATE(priv, "leave\n");
3092 #ifdef CONFIG_MAC80211_DEBUGFS
3093 static int open_file_generic(struct inode *inode, struct file *file)
3095 file->private_data = inode->i_private;
3096 return 0;
3098 static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
3099 u32 *rate_n_flags, int index)
3101 struct iwl_priv *priv;
3102 u8 valid_tx_ant;
3103 u8 ant_sel_tx;
3105 priv = lq_sta->drv;
3106 valid_tx_ant = hw_params(priv).valid_tx_ant;
3107 if (lq_sta->dbg_fixed_rate) {
3108 ant_sel_tx =
3109 ((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK)
3110 >> RATE_MCS_ANT_POS);
3111 if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) {
3112 *rate_n_flags = lq_sta->dbg_fixed_rate;
3113 IWL_DEBUG_RATE(priv, "Fixed rate ON\n");
3114 } else {
3115 lq_sta->dbg_fixed_rate = 0;
3116 IWL_ERR(priv,
3117 "Invalid antenna selection 0x%X, Valid is 0x%X\n",
3118 ant_sel_tx, valid_tx_ant);
3119 IWL_DEBUG_RATE(priv, "Fixed rate OFF\n");
3121 } else {
3122 IWL_DEBUG_RATE(priv, "Fixed rate OFF\n");
3126 static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
3127 const char __user *user_buf, size_t count, loff_t *ppos)
3129 struct iwl_lq_sta *lq_sta = file->private_data;
3130 struct iwl_priv *priv;
3131 char buf[64];
3132 size_t buf_size;
3133 u32 parsed_rate;
3136 priv = lq_sta->drv;
3137 memset(buf, 0, sizeof(buf));
3138 buf_size = min(count, sizeof(buf) - 1);
3139 if (copy_from_user(buf, user_buf, buf_size))
3140 return -EFAULT;
3142 if (sscanf(buf, "%x", &parsed_rate) == 1)
3143 lq_sta->dbg_fixed_rate = parsed_rate;
3144 else
3145 lq_sta->dbg_fixed_rate = 0;
3147 rs_program_fix_rate(priv, lq_sta);
3149 return count;
3152 static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
3153 char __user *user_buf, size_t count, loff_t *ppos)
3155 char *buff;
3156 int desc = 0;
3157 int i = 0;
3158 int index = 0;
3159 ssize_t ret;
3161 struct iwl_lq_sta *lq_sta = file->private_data;
3162 struct iwl_priv *priv;
3163 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
3165 priv = lq_sta->drv;
3166 buff = kmalloc(1024, GFP_KERNEL);
3167 if (!buff)
3168 return -ENOMEM;
3170 desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id);
3171 desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n",
3172 lq_sta->total_failed, lq_sta->total_success,
3173 lq_sta->active_legacy_rate);
3174 desc += sprintf(buff+desc, "fixed rate 0x%X\n",
3175 lq_sta->dbg_fixed_rate);
3176 desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n",
3177 (hw_params(priv).valid_tx_ant & ANT_A) ? "ANT_A," : "",
3178 (hw_params(priv).valid_tx_ant & ANT_B) ? "ANT_B," : "",
3179 (hw_params(priv).valid_tx_ant & ANT_C) ? "ANT_C" : "");
3180 desc += sprintf(buff+desc, "lq type %s\n",
3181 (is_legacy(tbl->lq_type)) ? "legacy" : "HT");
3182 if (is_Ht(tbl->lq_type)) {
3183 desc += sprintf(buff+desc, " %s",
3184 (is_siso(tbl->lq_type)) ? "SISO" :
3185 ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3"));
3186 desc += sprintf(buff+desc, " %s",
3187 (tbl->is_ht40) ? "40MHz" : "20MHz");
3188 desc += sprintf(buff+desc, " %s %s %s\n", (tbl->is_SGI) ? "SGI" : "",
3189 (lq_sta->is_green) ? "GF enabled" : "",
3190 (lq_sta->is_agg) ? "AGG on" : "");
3192 desc += sprintf(buff+desc, "last tx rate=0x%X\n",
3193 lq_sta->last_rate_n_flags);
3194 desc += sprintf(buff+desc, "general:"
3195 "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
3196 lq_sta->lq.general_params.flags,
3197 lq_sta->lq.general_params.mimo_delimiter,
3198 lq_sta->lq.general_params.single_stream_ant_msk,
3199 lq_sta->lq.general_params.dual_stream_ant_msk);
3201 desc += sprintf(buff+desc, "agg:"
3202 "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
3203 le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
3204 lq_sta->lq.agg_params.agg_dis_start_th,
3205 lq_sta->lq.agg_params.agg_frame_cnt_limit);
3207 desc += sprintf(buff+desc,
3208 "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
3209 lq_sta->lq.general_params.start_rate_index[0],
3210 lq_sta->lq.general_params.start_rate_index[1],
3211 lq_sta->lq.general_params.start_rate_index[2],
3212 lq_sta->lq.general_params.start_rate_index[3]);
3214 for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
3215 index = iwl_hwrate_to_plcp_idx(
3216 le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
3217 if (is_legacy(tbl->lq_type)) {
3218 desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n",
3219 i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
3220 iwl_rate_mcs[index].mbps);
3221 } else {
3222 desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps (%s)\n",
3223 i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
3224 iwl_rate_mcs[index].mbps, iwl_rate_mcs[index].mcs);
3228 ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
3229 kfree(buff);
3230 return ret;
3233 static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
3234 .write = rs_sta_dbgfs_scale_table_write,
3235 .read = rs_sta_dbgfs_scale_table_read,
3236 .open = open_file_generic,
3237 .llseek = default_llseek,
3239 static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
3240 char __user *user_buf, size_t count, loff_t *ppos)
3242 char *buff;
3243 int desc = 0;
3244 int i, j;
3245 ssize_t ret;
3247 struct iwl_lq_sta *lq_sta = file->private_data;
3249 buff = kmalloc(1024, GFP_KERNEL);
3250 if (!buff)
3251 return -ENOMEM;
3253 for (i = 0; i < LQ_SIZE; i++) {
3254 desc += sprintf(buff+desc,
3255 "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n"
3256 "rate=0x%X\n",
3257 lq_sta->active_tbl == i ? "*" : "x",
3258 lq_sta->lq_info[i].lq_type,
3259 lq_sta->lq_info[i].is_SGI,
3260 lq_sta->lq_info[i].is_ht40,
3261 lq_sta->lq_info[i].is_dup,
3262 lq_sta->is_green,
3263 lq_sta->lq_info[i].current_rate);
3264 for (j = 0; j < IWL_RATE_COUNT; j++) {
3265 desc += sprintf(buff+desc,
3266 "counter=%d success=%d %%=%d\n",
3267 lq_sta->lq_info[i].win[j].counter,
3268 lq_sta->lq_info[i].win[j].success_counter,
3269 lq_sta->lq_info[i].win[j].success_ratio);
3272 ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
3273 kfree(buff);
3274 return ret;
3277 static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
3278 .read = rs_sta_dbgfs_stats_table_read,
3279 .open = open_file_generic,
3280 .llseek = default_llseek,
3283 static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file,
3284 char __user *user_buf, size_t count, loff_t *ppos)
3286 struct iwl_lq_sta *lq_sta = file->private_data;
3287 struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl];
3288 char buff[120];
3289 int desc = 0;
3291 if (is_Ht(tbl->lq_type))
3292 desc += sprintf(buff+desc,
3293 "Bit Rate= %d Mb/s\n",
3294 tbl->expected_tpt[lq_sta->last_txrate_idx]);
3295 else
3296 desc += sprintf(buff+desc,
3297 "Bit Rate= %d Mb/s\n",
3298 iwl_rates[lq_sta->last_txrate_idx].ieee >> 1);
3300 return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
3303 static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = {
3304 .read = rs_sta_dbgfs_rate_scale_data_read,
3305 .open = open_file_generic,
3306 .llseek = default_llseek,
3309 static void rs_add_debugfs(void *priv, void *priv_sta,
3310 struct dentry *dir)
3312 struct iwl_lq_sta *lq_sta = priv_sta;
3313 lq_sta->rs_sta_dbgfs_scale_table_file =
3314 debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir,
3315 lq_sta, &rs_sta_dbgfs_scale_table_ops);
3316 lq_sta->rs_sta_dbgfs_stats_table_file =
3317 debugfs_create_file("rate_stats_table", S_IRUSR, dir,
3318 lq_sta, &rs_sta_dbgfs_stats_table_ops);
3319 lq_sta->rs_sta_dbgfs_rate_scale_data_file =
3320 debugfs_create_file("rate_scale_data", S_IRUSR, dir,
3321 lq_sta, &rs_sta_dbgfs_rate_scale_data_ops);
3322 lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
3323 debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir,
3324 &lq_sta->tx_agg_tid_en);
3328 static void rs_remove_debugfs(void *priv, void *priv_sta)
3330 struct iwl_lq_sta *lq_sta = priv_sta;
3331 debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
3332 debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
3333 debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file);
3334 debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
3336 #endif
3339 * Initialization of rate scaling information is done by driver after
3340 * the station is added. Since mac80211 calls this function before a
3341 * station is added we ignore it.
3343 static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband,
3344 struct ieee80211_sta *sta, void *priv_sta)
3347 static struct rate_control_ops rs_ops = {
3348 .module = NULL,
3349 .name = RS_NAME,
3350 .tx_status = rs_tx_status,
3351 .get_rate = rs_get_rate,
3352 .rate_init = rs_rate_init_stub,
3353 .alloc = rs_alloc,
3354 .free = rs_free,
3355 .alloc_sta = rs_alloc_sta,
3356 .free_sta = rs_free_sta,
3357 #ifdef CONFIG_MAC80211_DEBUGFS
3358 .add_sta_debugfs = rs_add_debugfs,
3359 .remove_sta_debugfs = rs_remove_debugfs,
3360 #endif
3363 int iwlagn_rate_control_register(void)
3365 return ieee80211_rate_control_register(&rs_ops);
3368 void iwlagn_rate_control_unregister(void)
3370 ieee80211_rate_control_unregister(&rs_ops);