iwlagn: remove un-necessary step
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / wireless / iwlwifi / iwl-agn-rs.c
blob353af8f995b0f8c3999e76d70a8e510f8eba3336
1 /******************************************************************************
3 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/skbuff.h>
29 #include <linux/slab.h>
30 #include <net/mac80211.h>
32 #include <linux/netdevice.h>
33 #include <linux/etherdevice.h>
34 #include <linux/delay.h>
36 #include <linux/workqueue.h>
38 #include "iwl-dev.h"
39 #include "iwl-sta.h"
40 #include "iwl-core.h"
41 #include "iwl-agn.h"
43 #define RS_NAME "iwl-agn-rs"
45 #define NUM_TRY_BEFORE_ANT_TOGGLE 1
46 #define IWL_NUMBER_TRY 1
47 #define IWL_HT_NUMBER_TRY 3
49 #define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */
50 #define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
51 #define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
53 /* max allowed rate miss before sync LQ cmd */
54 #define IWL_MISSED_RATE_MAX 15
55 /* max time to accum history 2 seconds */
56 #define IWL_RATE_SCALE_FLUSH_INTVL (3*HZ)
58 static u8 rs_ht_to_legacy[] = {
59 IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
60 IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
61 IWL_RATE_6M_INDEX,
62 IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX,
63 IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX,
64 IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX,
65 IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX
68 static const u8 ant_toggle_lookup[] = {
69 /*ANT_NONE -> */ ANT_NONE,
70 /*ANT_A -> */ ANT_B,
71 /*ANT_B -> */ ANT_C,
72 /*ANT_AB -> */ ANT_BC,
73 /*ANT_C -> */ ANT_A,
74 /*ANT_AC -> */ ANT_AB,
75 /*ANT_BC -> */ ANT_AC,
76 /*ANT_ABC -> */ ANT_ABC,
79 #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
80 [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
81 IWL_RATE_SISO_##s##M_PLCP, \
82 IWL_RATE_MIMO2_##s##M_PLCP,\
83 IWL_RATE_MIMO3_##s##M_PLCP,\
84 IWL_RATE_##r##M_IEEE, \
85 IWL_RATE_##ip##M_INDEX, \
86 IWL_RATE_##in##M_INDEX, \
87 IWL_RATE_##rp##M_INDEX, \
88 IWL_RATE_##rn##M_INDEX, \
89 IWL_RATE_##pp##M_INDEX, \
90 IWL_RATE_##np##M_INDEX }
93 * Parameter order:
94 * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
96 * If there isn't a valid next or previous rate then INV is used which
97 * maps to IWL_RATE_INVALID
100 const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
101 IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
102 IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
103 IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
104 IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
105 IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
106 IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
107 IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
108 IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
109 IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
110 IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
111 IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
112 IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
113 IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
114 /* FIXME:RS: ^^ should be INV (legacy) */
117 static inline u8 rs_extract_rate(u32 rate_n_flags)
119 return (u8)(rate_n_flags & RATE_MCS_RATE_MSK);
122 static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
124 int idx = 0;
126 /* HT rate format */
127 if (rate_n_flags & RATE_MCS_HT_MSK) {
128 idx = rs_extract_rate(rate_n_flags);
130 if (idx >= IWL_RATE_MIMO3_6M_PLCP)
131 idx = idx - IWL_RATE_MIMO3_6M_PLCP;
132 else if (idx >= IWL_RATE_MIMO2_6M_PLCP)
133 idx = idx - IWL_RATE_MIMO2_6M_PLCP;
135 idx += IWL_FIRST_OFDM_RATE;
136 /* skip 9M not supported in ht*/
137 if (idx >= IWL_RATE_9M_INDEX)
138 idx += 1;
139 if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
140 return idx;
142 /* legacy rate format, search for match in table */
143 } else {
144 for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
145 if (iwl_rates[idx].plcp ==
146 rs_extract_rate(rate_n_flags))
147 return idx;
150 return -1;
153 static void rs_rate_scale_perform(struct iwl_priv *priv,
154 struct sk_buff *skb,
155 struct ieee80211_sta *sta,
156 struct iwl_lq_sta *lq_sta);
157 static void rs_fill_link_cmd(struct iwl_priv *priv,
158 struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
159 static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search);
162 #ifdef CONFIG_MAC80211_DEBUGFS
163 static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
164 u32 *rate_n_flags, int index);
165 #else
166 static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
167 u32 *rate_n_flags, int index)
169 #endif
172 * The following tables contain the expected throughput metrics for all rates
174 * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
176 * where invalid entries are zeros.
178 * CCK rates are only valid in legacy table and will only be used in G
179 * (2.4 GHz) band.
182 static s32 expected_tpt_legacy[IWL_RATE_COUNT] = {
183 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
186 static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = {
187 {0, 0, 0, 0, 42, 0, 76, 102, 124, 159, 183, 193, 202}, /* Norm */
188 {0, 0, 0, 0, 46, 0, 82, 110, 132, 168, 192, 202, 210}, /* SGI */
189 {0, 0, 0, 0, 47, 0, 91, 133, 171, 242, 305, 334, 362}, /* AGG */
190 {0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */
193 static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = {
194 {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
195 {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
196 {0, 0, 0, 0, 94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */
197 {0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */
200 static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = {
201 {0, 0, 0, 0, 74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */
202 {0, 0, 0, 0, 81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */
203 {0, 0, 0, 0, 89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */
204 {0, 0, 0, 0, 97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/
207 static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = {
208 {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
209 {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
210 {0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */
211 {0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */
214 static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = {
215 {0, 0, 0, 0, 99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */
216 {0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */
217 {0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */
218 {0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */
221 static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = {
222 {0, 0, 0, 0, 152, 0, 211, 239, 255, 279, 290, 294, 297}, /* Norm */
223 {0, 0, 0, 0, 160, 0, 219, 245, 261, 284, 294, 297, 300}, /* SGI */
224 {0, 0, 0, 0, 254, 0, 443, 584, 695, 868, 984, 1030, 1070}, /* AGG */
225 {0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */
228 /* mbps, mcs */
229 static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
230 { "1", "BPSK DSSS"},
231 { "2", "QPSK DSSS"},
232 {"5.5", "BPSK CCK"},
233 { "11", "QPSK CCK"},
234 { "6", "BPSK 1/2"},
235 { "9", "BPSK 1/2"},
236 { "12", "QPSK 1/2"},
237 { "18", "QPSK 3/4"},
238 { "24", "16QAM 1/2"},
239 { "36", "16QAM 3/4"},
240 { "48", "64QAM 2/3"},
241 { "54", "64QAM 3/4"},
242 { "60", "64QAM 5/6"},
245 #define MCS_INDEX_PER_STREAM (8)
247 static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
249 window->data = 0;
250 window->success_counter = 0;
251 window->success_ratio = IWL_INVALID_VALUE;
252 window->counter = 0;
253 window->average_tpt = IWL_INVALID_VALUE;
254 window->stamp = 0;
257 static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
259 return (ant_type & valid_antenna) == ant_type;
263 * removes the old data from the statistics. All data that is older than
264 * TID_MAX_TIME_DIFF, will be deleted.
266 static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time)
268 /* The oldest age we want to keep */
269 u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
271 while (tl->queue_count &&
272 (tl->time_stamp < oldest_time)) {
273 tl->total -= tl->packet_count[tl->head];
274 tl->packet_count[tl->head] = 0;
275 tl->time_stamp += TID_QUEUE_CELL_SPACING;
276 tl->queue_count--;
277 tl->head++;
278 if (tl->head >= TID_QUEUE_MAX_SIZE)
279 tl->head = 0;
284 * increment traffic load value for tid and also remove
285 * any old values if passed the certain time period
287 static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data,
288 struct ieee80211_hdr *hdr)
290 u32 curr_time = jiffies_to_msecs(jiffies);
291 u32 time_diff;
292 s32 index;
293 struct iwl_traffic_load *tl = NULL;
294 u8 tid;
296 if (ieee80211_is_data_qos(hdr->frame_control)) {
297 u8 *qc = ieee80211_get_qos_ctl(hdr);
298 tid = qc[0] & 0xf;
299 } else
300 return IWL_MAX_TID_COUNT;
302 if (unlikely(tid >= TID_MAX_LOAD_COUNT))
303 return IWL_MAX_TID_COUNT;
305 tl = &lq_data->load[tid];
307 curr_time -= curr_time % TID_ROUND_VALUE;
309 /* Happens only for the first packet. Initialize the data */
310 if (!(tl->queue_count)) {
311 tl->total = 1;
312 tl->time_stamp = curr_time;
313 tl->queue_count = 1;
314 tl->head = 0;
315 tl->packet_count[0] = 1;
316 return IWL_MAX_TID_COUNT;
319 time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
320 index = time_diff / TID_QUEUE_CELL_SPACING;
322 /* The history is too long: remove data that is older than */
323 /* TID_MAX_TIME_DIFF */
324 if (index >= TID_QUEUE_MAX_SIZE)
325 rs_tl_rm_old_stats(tl, curr_time);
327 index = (tl->head + index) % TID_QUEUE_MAX_SIZE;
328 tl->packet_count[index] = tl->packet_count[index] + 1;
329 tl->total = tl->total + 1;
331 if ((index + 1) > tl->queue_count)
332 tl->queue_count = index + 1;
334 return tid;
337 #ifdef CONFIG_MAC80211_DEBUGFS
339 * Program the device to use fixed rate for frame transmit
340 * This is for debugging/testing only
341 * once the device start use fixed rate, we need to reload the module
342 * to being back the normal operation.
344 static void rs_program_fix_rate(struct iwl_priv *priv,
345 struct iwl_lq_sta *lq_sta)
347 struct iwl_station_priv *sta_priv =
348 container_of(lq_sta, struct iwl_station_priv, lq_sta);
349 struct iwl_rxon_context *ctx = sta_priv->ctx;
351 lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */
352 lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
353 lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
354 lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
356 #ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
357 /* testmode has higher priority to overwirte the fixed rate */
358 if (priv->tm_fixed_rate)
359 lq_sta->dbg_fixed_rate = priv->tm_fixed_rate;
360 #endif
362 IWL_DEBUG_RATE(priv, "sta_id %d rate 0x%X\n",
363 lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
365 if (lq_sta->dbg_fixed_rate) {
366 rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
367 iwl_send_lq_cmd(lq_sta->drv, ctx, &lq_sta->lq, CMD_ASYNC,
368 false);
371 #endif
374 get the traffic load value for tid
376 static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid)
378 u32 curr_time = jiffies_to_msecs(jiffies);
379 u32 time_diff;
380 s32 index;
381 struct iwl_traffic_load *tl = NULL;
383 if (tid >= TID_MAX_LOAD_COUNT)
384 return 0;
386 tl = &(lq_data->load[tid]);
388 curr_time -= curr_time % TID_ROUND_VALUE;
390 if (!(tl->queue_count))
391 return 0;
393 time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
394 index = time_diff / TID_QUEUE_CELL_SPACING;
396 /* The history is too long: remove data that is older than */
397 /* TID_MAX_TIME_DIFF */
398 if (index >= TID_QUEUE_MAX_SIZE)
399 rs_tl_rm_old_stats(tl, curr_time);
401 return tl->total;
404 static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
405 struct iwl_lq_sta *lq_data, u8 tid,
406 struct ieee80211_sta *sta)
408 int ret = -EAGAIN;
409 u32 load;
412 * Don't create TX aggregation sessions when in high
413 * BT traffic, as they would just be disrupted by BT.
415 if (priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) {
416 IWL_ERR(priv, "BT traffic (%d), no aggregation allowed\n",
417 priv->bt_traffic_load);
418 return ret;
421 load = rs_tl_get_load(lq_data, tid);
423 if ((iwlagn_mod_params.auto_agg) || (load > IWL_AGG_LOAD_THRESHOLD)) {
424 IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n",
425 sta->addr, tid);
426 ret = ieee80211_start_tx_ba_session(sta, tid, 5000);
427 if (ret == -EAGAIN) {
429 * driver and mac80211 is out of sync
430 * this might be cause by reloading firmware
431 * stop the tx ba session here
433 IWL_ERR(priv, "Fail start Tx agg on tid: %d\n",
434 tid);
435 ieee80211_stop_tx_ba_session(sta, tid);
437 } else {
438 IWL_DEBUG_HT(priv, "Aggregation not enabled for tid %d "
439 "because load = %u\n", tid, load);
441 return ret;
444 static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
445 struct iwl_lq_sta *lq_data,
446 struct ieee80211_sta *sta)
448 if (tid < TID_MAX_LOAD_COUNT)
449 rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
450 else
451 IWL_ERR(priv, "tid exceeds max load count: %d/%d\n",
452 tid, TID_MAX_LOAD_COUNT);
455 static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
457 return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
458 !!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
459 !!(rate_n_flags & RATE_MCS_ANT_C_MSK);
463 * Static function to get the expected throughput from an iwl_scale_tbl_info
464 * that wraps a NULL pointer check
466 static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index)
468 if (tbl->expected_tpt)
469 return tbl->expected_tpt[rs_index];
470 return 0;
474 * rs_collect_tx_data - Update the success/failure sliding window
476 * We keep a sliding window of the last 62 packets transmitted
477 * at this rate. window->data contains the bitmask of successful
478 * packets.
480 static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
481 int scale_index, int attempts, int successes)
483 struct iwl_rate_scale_data *window = NULL;
484 static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1));
485 s32 fail_count, tpt;
487 if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
488 return -EINVAL;
490 /* Select window for current tx bit rate */
491 window = &(tbl->win[scale_index]);
493 /* Get expected throughput */
494 tpt = get_expected_tpt(tbl, scale_index);
497 * Keep track of only the latest 62 tx frame attempts in this rate's
498 * history window; anything older isn't really relevant any more.
499 * If we have filled up the sliding window, drop the oldest attempt;
500 * if the oldest attempt (highest bit in bitmap) shows "success",
501 * subtract "1" from the success counter (this is the main reason
502 * we keep these bitmaps!).
504 while (attempts > 0) {
505 if (window->counter >= IWL_RATE_MAX_WINDOW) {
507 /* remove earliest */
508 window->counter = IWL_RATE_MAX_WINDOW - 1;
510 if (window->data & mask) {
511 window->data &= ~mask;
512 window->success_counter--;
516 /* Increment frames-attempted counter */
517 window->counter++;
519 /* Shift bitmap by one frame to throw away oldest history */
520 window->data <<= 1;
522 /* Mark the most recent #successes attempts as successful */
523 if (successes > 0) {
524 window->success_counter++;
525 window->data |= 0x1;
526 successes--;
529 attempts--;
532 /* Calculate current success ratio, avoid divide-by-0! */
533 if (window->counter > 0)
534 window->success_ratio = 128 * (100 * window->success_counter)
535 / window->counter;
536 else
537 window->success_ratio = IWL_INVALID_VALUE;
539 fail_count = window->counter - window->success_counter;
541 /* Calculate average throughput, if we have enough history. */
542 if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
543 (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
544 window->average_tpt = (window->success_ratio * tpt + 64) / 128;
545 else
546 window->average_tpt = IWL_INVALID_VALUE;
548 /* Tag this window as having been updated */
549 window->stamp = jiffies;
551 return 0;
555 * Fill uCode API rate_n_flags field, based on "search" or "active" table.
557 /* FIXME:RS:remove this function and put the flags statically in the table */
558 static u32 rate_n_flags_from_tbl(struct iwl_priv *priv,
559 struct iwl_scale_tbl_info *tbl,
560 int index, u8 use_green)
562 u32 rate_n_flags = 0;
564 if (is_legacy(tbl->lq_type)) {
565 rate_n_flags = iwl_rates[index].plcp;
566 if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE)
567 rate_n_flags |= RATE_MCS_CCK_MSK;
569 } else if (is_Ht(tbl->lq_type)) {
570 if (index > IWL_LAST_OFDM_RATE) {
571 IWL_ERR(priv, "Invalid HT rate index %d\n", index);
572 index = IWL_LAST_OFDM_RATE;
574 rate_n_flags = RATE_MCS_HT_MSK;
576 if (is_siso(tbl->lq_type))
577 rate_n_flags |= iwl_rates[index].plcp_siso;
578 else if (is_mimo2(tbl->lq_type))
579 rate_n_flags |= iwl_rates[index].plcp_mimo2;
580 else
581 rate_n_flags |= iwl_rates[index].plcp_mimo3;
582 } else {
583 IWL_ERR(priv, "Invalid tbl->lq_type %d\n", tbl->lq_type);
586 rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) &
587 RATE_MCS_ANT_ABC_MSK);
589 if (is_Ht(tbl->lq_type)) {
590 if (tbl->is_ht40) {
591 if (tbl->is_dup)
592 rate_n_flags |= RATE_MCS_DUP_MSK;
593 else
594 rate_n_flags |= RATE_MCS_HT40_MSK;
596 if (tbl->is_SGI)
597 rate_n_flags |= RATE_MCS_SGI_MSK;
599 if (use_green) {
600 rate_n_flags |= RATE_MCS_GF_MSK;
601 if (is_siso(tbl->lq_type) && tbl->is_SGI) {
602 rate_n_flags &= ~RATE_MCS_SGI_MSK;
603 IWL_ERR(priv, "GF was set with SGI:SISO\n");
607 return rate_n_flags;
611 * Interpret uCode API's rate_n_flags format,
612 * fill "search" or "active" tx mode table.
614 static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
615 enum ieee80211_band band,
616 struct iwl_scale_tbl_info *tbl,
617 int *rate_idx)
619 u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
620 u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags);
621 u8 mcs;
623 memset(tbl, 0, sizeof(struct iwl_scale_tbl_info));
624 *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
626 if (*rate_idx == IWL_RATE_INVALID) {
627 *rate_idx = -1;
628 return -EINVAL;
630 tbl->is_SGI = 0; /* default legacy setup */
631 tbl->is_ht40 = 0;
632 tbl->is_dup = 0;
633 tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
634 tbl->lq_type = LQ_NONE;
635 tbl->max_search = IWL_MAX_SEARCH;
637 /* legacy rate format */
638 if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
639 if (num_of_ant == 1) {
640 if (band == IEEE80211_BAND_5GHZ)
641 tbl->lq_type = LQ_A;
642 else
643 tbl->lq_type = LQ_G;
645 /* HT rate format */
646 } else {
647 if (rate_n_flags & RATE_MCS_SGI_MSK)
648 tbl->is_SGI = 1;
650 if ((rate_n_flags & RATE_MCS_HT40_MSK) ||
651 (rate_n_flags & RATE_MCS_DUP_MSK))
652 tbl->is_ht40 = 1;
654 if (rate_n_flags & RATE_MCS_DUP_MSK)
655 tbl->is_dup = 1;
657 mcs = rs_extract_rate(rate_n_flags);
659 /* SISO */
660 if (mcs <= IWL_RATE_SISO_60M_PLCP) {
661 if (num_of_ant == 1)
662 tbl->lq_type = LQ_SISO; /*else NONE*/
663 /* MIMO2 */
664 } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) {
665 if (num_of_ant == 2)
666 tbl->lq_type = LQ_MIMO2;
667 /* MIMO3 */
668 } else {
669 if (num_of_ant == 3) {
670 tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
671 tbl->lq_type = LQ_MIMO3;
675 return 0;
678 /* switch to another antenna/antennas and return 1 */
679 /* if no other valid antenna found, return 0 */
680 static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
681 struct iwl_scale_tbl_info *tbl)
683 u8 new_ant_type;
685 if (!tbl->ant_type || tbl->ant_type > ANT_ABC)
686 return 0;
688 if (!rs_is_valid_ant(valid_ant, tbl->ant_type))
689 return 0;
691 new_ant_type = ant_toggle_lookup[tbl->ant_type];
693 while ((new_ant_type != tbl->ant_type) &&
694 !rs_is_valid_ant(valid_ant, new_ant_type))
695 new_ant_type = ant_toggle_lookup[new_ant_type];
697 if (new_ant_type == tbl->ant_type)
698 return 0;
700 tbl->ant_type = new_ant_type;
701 *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK;
702 *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS;
703 return 1;
707 * Green-field mode is valid if the station supports it and
708 * there are no non-GF stations present in the BSS.
710 static bool rs_use_green(struct ieee80211_sta *sta)
712 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
713 struct iwl_rxon_context *ctx = sta_priv->ctx;
715 return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
716 !(ctx->ht.non_gf_sta_present);
720 * rs_get_supported_rates - get the available rates
722 * if management frame or broadcast frame only return
723 * basic available rates.
726 static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta,
727 struct ieee80211_hdr *hdr,
728 enum iwl_table_type rate_type)
730 if (is_legacy(rate_type)) {
731 return lq_sta->active_legacy_rate;
732 } else {
733 if (is_siso(rate_type))
734 return lq_sta->active_siso_rate;
735 else if (is_mimo2(rate_type))
736 return lq_sta->active_mimo2_rate;
737 else
738 return lq_sta->active_mimo3_rate;
742 static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask,
743 int rate_type)
745 u8 high = IWL_RATE_INVALID;
746 u8 low = IWL_RATE_INVALID;
748 /* 802.11A or ht walks to the next literal adjacent rate in
749 * the rate table */
750 if (is_a_band(rate_type) || !is_legacy(rate_type)) {
751 int i;
752 u32 mask;
754 /* Find the previous rate that is in the rate mask */
755 i = index - 1;
756 for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
757 if (rate_mask & mask) {
758 low = i;
759 break;
763 /* Find the next rate that is in the rate mask */
764 i = index + 1;
765 for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) {
766 if (rate_mask & mask) {
767 high = i;
768 break;
772 return (high << 8) | low;
775 low = index;
776 while (low != IWL_RATE_INVALID) {
777 low = iwl_rates[low].prev_rs;
778 if (low == IWL_RATE_INVALID)
779 break;
780 if (rate_mask & (1 << low))
781 break;
782 IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low);
785 high = index;
786 while (high != IWL_RATE_INVALID) {
787 high = iwl_rates[high].next_rs;
788 if (high == IWL_RATE_INVALID)
789 break;
790 if (rate_mask & (1 << high))
791 break;
792 IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high);
795 return (high << 8) | low;
798 static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
799 struct iwl_scale_tbl_info *tbl,
800 u8 scale_index, u8 ht_possible)
802 s32 low;
803 u16 rate_mask;
804 u16 high_low;
805 u8 switch_to_legacy = 0;
806 u8 is_green = lq_sta->is_green;
807 struct iwl_priv *priv = lq_sta->drv;
809 /* check if we need to switch from HT to legacy rates.
810 * assumption is that mandatory rates (1Mbps or 6Mbps)
811 * are always supported (spec demand) */
812 if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) {
813 switch_to_legacy = 1;
814 scale_index = rs_ht_to_legacy[scale_index];
815 if (lq_sta->band == IEEE80211_BAND_5GHZ)
816 tbl->lq_type = LQ_A;
817 else
818 tbl->lq_type = LQ_G;
820 if (num_of_ant(tbl->ant_type) > 1)
821 tbl->ant_type =
822 first_antenna(hw_params(priv).valid_tx_ant);
824 tbl->is_ht40 = 0;
825 tbl->is_SGI = 0;
826 tbl->max_search = IWL_MAX_SEARCH;
829 rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
831 /* Mask with station rate restriction */
832 if (is_legacy(tbl->lq_type)) {
833 /* supp_rates has no CCK bits in A mode */
834 if (lq_sta->band == IEEE80211_BAND_5GHZ)
835 rate_mask = (u16)(rate_mask &
836 (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
837 else
838 rate_mask = (u16)(rate_mask & lq_sta->supp_rates);
841 /* If we switched from HT to legacy, check current rate */
842 if (switch_to_legacy && (rate_mask & (1 << scale_index))) {
843 low = scale_index;
844 goto out;
847 high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask,
848 tbl->lq_type);
849 low = high_low & 0xff;
851 if (low == IWL_RATE_INVALID)
852 low = scale_index;
854 out:
855 return rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green);
859 * Simple function to compare two rate scale table types
861 static bool table_type_matches(struct iwl_scale_tbl_info *a,
862 struct iwl_scale_tbl_info *b)
864 return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) &&
865 (a->is_SGI == b->is_SGI);
868 static void rs_bt_update_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
869 struct iwl_lq_sta *lq_sta)
871 struct iwl_scale_tbl_info *tbl;
872 bool full_concurrent = priv->bt_full_concurrent;
873 unsigned long flags;
875 if (priv->bt_ant_couple_ok) {
877 * Is there a need to switch between
878 * full concurrency and 3-wire?
880 spin_lock_irqsave(&priv->shrd->lock, flags);
881 if (priv->bt_ci_compliance && priv->bt_ant_couple_ok)
882 full_concurrent = true;
883 else
884 full_concurrent = false;
885 spin_unlock_irqrestore(&priv->shrd->lock, flags);
887 if ((priv->bt_traffic_load != priv->last_bt_traffic_load) ||
888 (priv->bt_full_concurrent != full_concurrent)) {
889 priv->bt_full_concurrent = full_concurrent;
891 /* Update uCode's rate table. */
892 tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
893 rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
894 iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
896 queue_work(priv->shrd->workqueue, &priv->bt_full_concurrency);
901 * mac80211 sends us Tx status
903 static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
904 struct ieee80211_sta *sta, void *priv_sta,
905 struct sk_buff *skb)
907 int legacy_success;
908 int retries;
909 int rs_index, mac_index, i;
910 struct iwl_lq_sta *lq_sta = priv_sta;
911 struct iwl_link_quality_cmd *table;
912 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
913 struct iwl_priv *priv = (struct iwl_priv *)priv_r;
914 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
915 enum mac80211_rate_control_flags mac_flags;
916 u32 tx_rate;
917 struct iwl_scale_tbl_info tbl_type;
918 struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl;
919 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
920 struct iwl_rxon_context *ctx = sta_priv->ctx;
922 IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
924 /* Treat uninitialized rate scaling data same as non-existing. */
925 if (!lq_sta) {
926 IWL_DEBUG_RATE(priv, "Station rate scaling not created yet.\n");
927 return;
928 } else if (!lq_sta->drv) {
929 IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
930 return;
933 if (!ieee80211_is_data(hdr->frame_control) ||
934 info->flags & IEEE80211_TX_CTL_NO_ACK)
935 return;
937 /* This packet was aggregated but doesn't carry status info */
938 if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
939 !(info->flags & IEEE80211_TX_STAT_AMPDU))
940 return;
943 * Ignore this Tx frame response if its initial rate doesn't match
944 * that of latest Link Quality command. There may be stragglers
945 * from a previous Link Quality command, but we're no longer interested
946 * in those; they're either from the "active" mode while we're trying
947 * to check "search" mode, or a prior "search" mode after we've moved
948 * to a new "search" mode (which might become the new "active" mode).
950 table = &lq_sta->lq;
951 tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
952 rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
953 if (priv->band == IEEE80211_BAND_5GHZ)
954 rs_index -= IWL_FIRST_OFDM_RATE;
955 mac_flags = info->status.rates[0].flags;
956 mac_index = info->status.rates[0].idx;
957 /* For HT packets, map MCS to PLCP */
958 if (mac_flags & IEEE80211_TX_RC_MCS) {
959 mac_index &= RATE_MCS_CODE_MSK; /* Remove # of streams */
960 if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE))
961 mac_index++;
963 * mac80211 HT index is always zero-indexed; we need to move
964 * HT OFDM rates after CCK rates in 2.4 GHz band
966 if (priv->band == IEEE80211_BAND_2GHZ)
967 mac_index += IWL_FIRST_OFDM_RATE;
969 /* Here we actually compare this rate to the latest LQ command */
970 if ((mac_index < 0) ||
971 (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) ||
972 (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
973 (tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA)) ||
974 (tbl_type.ant_type != info->antenna_sel_tx) ||
975 (!!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)) ||
976 (!!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
977 (rs_index != mac_index)) {
978 IWL_DEBUG_RATE(priv, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate);
980 * Since rates mis-match, the last LQ command may have failed.
981 * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with
982 * ... driver.
984 lq_sta->missed_rate_counter++;
985 if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) {
986 lq_sta->missed_rate_counter = 0;
987 iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
989 /* Regardless, ignore this status info for outdated rate */
990 return;
991 } else
992 /* Rate did match, so reset the missed_rate_counter */
993 lq_sta->missed_rate_counter = 0;
995 /* Figure out if rate scale algorithm is in active or search table */
996 if (table_type_matches(&tbl_type,
997 &(lq_sta->lq_info[lq_sta->active_tbl]))) {
998 curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
999 other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
1000 } else if (table_type_matches(&tbl_type,
1001 &lq_sta->lq_info[1 - lq_sta->active_tbl])) {
1002 curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
1003 other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1004 } else {
1005 IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n");
1006 tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1007 IWL_DEBUG_RATE(priv, "active- lq:%x, ant:%x, SGI:%d\n",
1008 tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI);
1009 tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
1010 IWL_DEBUG_RATE(priv, "search- lq:%x, ant:%x, SGI:%d\n",
1011 tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI);
1012 IWL_DEBUG_RATE(priv, "actual- lq:%x, ant:%x, SGI:%d\n",
1013 tbl_type.lq_type, tbl_type.ant_type, tbl_type.is_SGI);
1015 * no matching table found, let's by-pass the data collection
1016 * and continue to perform rate scale to find the rate table
1018 rs_stay_in_table(lq_sta, true);
1019 goto done;
1023 * Updating the frame history depends on whether packets were
1024 * aggregated.
1026 * For aggregation, all packets were transmitted at the same rate, the
1027 * first index into rate scale table.
1029 if (info->flags & IEEE80211_TX_STAT_AMPDU) {
1030 tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
1031 rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type,
1032 &rs_index);
1033 rs_collect_tx_data(curr_tbl, rs_index,
1034 info->status.ampdu_len,
1035 info->status.ampdu_ack_len);
1037 /* Update success/fail counts if not searching for new mode */
1038 if (lq_sta->stay_in_tbl) {
1039 lq_sta->total_success += info->status.ampdu_ack_len;
1040 lq_sta->total_failed += (info->status.ampdu_len -
1041 info->status.ampdu_ack_len);
1043 } else {
1045 * For legacy, update frame history with for each Tx retry.
1047 retries = info->status.rates[0].count - 1;
1048 /* HW doesn't send more than 15 retries */
1049 retries = min(retries, 15);
1051 /* The last transmission may have been successful */
1052 legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK);
1053 /* Collect data for each rate used during failed TX attempts */
1054 for (i = 0; i <= retries; ++i) {
1055 tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags);
1056 rs_get_tbl_info_from_mcs(tx_rate, priv->band,
1057 &tbl_type, &rs_index);
1059 * Only collect stats if retried rate is in the same RS
1060 * table as active/search.
1062 if (table_type_matches(&tbl_type, curr_tbl))
1063 tmp_tbl = curr_tbl;
1064 else if (table_type_matches(&tbl_type, other_tbl))
1065 tmp_tbl = other_tbl;
1066 else
1067 continue;
1068 rs_collect_tx_data(tmp_tbl, rs_index, 1,
1069 i < retries ? 0 : legacy_success);
1072 /* Update success/fail counts if not searching for new mode */
1073 if (lq_sta->stay_in_tbl) {
1074 lq_sta->total_success += legacy_success;
1075 lq_sta->total_failed += retries + (1 - legacy_success);
1078 /* The last TX rate is cached in lq_sta; it's set in if/else above */
1079 lq_sta->last_rate_n_flags = tx_rate;
1080 done:
1081 /* See if there's a better rate or modulation mode to try. */
1082 if (sta && sta->supp_rates[sband->band])
1083 rs_rate_scale_perform(priv, skb, sta, lq_sta);
1085 #if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_IWLWIFI_DEVICE_SVTOOL)
1086 if ((priv->tm_fixed_rate) &&
1087 (priv->tm_fixed_rate != lq_sta->dbg_fixed_rate))
1088 rs_program_fix_rate(priv, lq_sta);
1089 #endif
1090 if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist)
1091 rs_bt_update_lq(priv, ctx, lq_sta);
1095 * Begin a period of staying with a selected modulation mode.
1096 * Set "stay_in_tbl" flag to prevent any mode switches.
1097 * Set frame tx success limits according to legacy vs. high-throughput,
1098 * and reset overall (spanning all rates) tx success history statistics.
1099 * These control how long we stay using same modulation mode before
1100 * searching for a new mode.
1102 static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
1103 struct iwl_lq_sta *lq_sta)
1105 IWL_DEBUG_RATE(priv, "we are staying in the same table\n");
1106 lq_sta->stay_in_tbl = 1; /* only place this gets set */
1107 if (is_legacy) {
1108 lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT;
1109 lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT;
1110 lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT;
1111 } else {
1112 lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT;
1113 lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT;
1114 lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT;
1116 lq_sta->table_count = 0;
1117 lq_sta->total_failed = 0;
1118 lq_sta->total_success = 0;
1119 lq_sta->flush_timer = jiffies;
1120 lq_sta->action_counter = 0;
1124 * Find correct throughput table for given mode of modulation
1126 static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
1127 struct iwl_scale_tbl_info *tbl)
1129 /* Used to choose among HT tables */
1130 s32 (*ht_tbl_pointer)[IWL_RATE_COUNT];
1132 /* Check for invalid LQ type */
1133 if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
1134 tbl->expected_tpt = expected_tpt_legacy;
1135 return;
1138 /* Legacy rates have only one table */
1139 if (is_legacy(tbl->lq_type)) {
1140 tbl->expected_tpt = expected_tpt_legacy;
1141 return;
1144 /* Choose among many HT tables depending on number of streams
1145 * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation
1146 * status */
1147 if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
1148 ht_tbl_pointer = expected_tpt_siso20MHz;
1149 else if (is_siso(tbl->lq_type))
1150 ht_tbl_pointer = expected_tpt_siso40MHz;
1151 else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
1152 ht_tbl_pointer = expected_tpt_mimo2_20MHz;
1153 else if (is_mimo2(tbl->lq_type))
1154 ht_tbl_pointer = expected_tpt_mimo2_40MHz;
1155 else if (is_mimo3(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
1156 ht_tbl_pointer = expected_tpt_mimo3_20MHz;
1157 else /* if (is_mimo3(tbl->lq_type)) <-- must be true */
1158 ht_tbl_pointer = expected_tpt_mimo3_40MHz;
1160 if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */
1161 tbl->expected_tpt = ht_tbl_pointer[0];
1162 else if (tbl->is_SGI && !lq_sta->is_agg) /* SGI */
1163 tbl->expected_tpt = ht_tbl_pointer[1];
1164 else if (!tbl->is_SGI && lq_sta->is_agg) /* AGG */
1165 tbl->expected_tpt = ht_tbl_pointer[2];
1166 else /* AGG+SGI */
1167 tbl->expected_tpt = ht_tbl_pointer[3];
1171 * Find starting rate for new "search" high-throughput mode of modulation.
1172 * Goal is to find lowest expected rate (under perfect conditions) that is
1173 * above the current measured throughput of "active" mode, to give new mode
1174 * a fair chance to prove itself without too many challenges.
1176 * This gets called when transitioning to more aggressive modulation
1177 * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
1178 * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need
1179 * to decrease to match "active" throughput. When moving from MIMO to SISO,
1180 * bit rate will typically need to increase, but not if performance was bad.
1182 static s32 rs_get_best_rate(struct iwl_priv *priv,
1183 struct iwl_lq_sta *lq_sta,
1184 struct iwl_scale_tbl_info *tbl, /* "search" */
1185 u16 rate_mask, s8 index)
1187 /* "active" values */
1188 struct iwl_scale_tbl_info *active_tbl =
1189 &(lq_sta->lq_info[lq_sta->active_tbl]);
1190 s32 active_sr = active_tbl->win[index].success_ratio;
1191 s32 active_tpt = active_tbl->expected_tpt[index];
1193 /* expected "search" throughput */
1194 s32 *tpt_tbl = tbl->expected_tpt;
1196 s32 new_rate, high, low, start_hi;
1197 u16 high_low;
1198 s8 rate = index;
1200 new_rate = high = low = start_hi = IWL_RATE_INVALID;
1202 for (; ;) {
1203 high_low = rs_get_adjacent_rate(priv, rate, rate_mask,
1204 tbl->lq_type);
1206 low = high_low & 0xff;
1207 high = (high_low >> 8) & 0xff;
1210 * Lower the "search" bit rate, to give new "search" mode
1211 * approximately the same throughput as "active" if:
1213 * 1) "Active" mode has been working modestly well (but not
1214 * great), and expected "search" throughput (under perfect
1215 * conditions) at candidate rate is above the actual
1216 * measured "active" throughput (but less than expected
1217 * "active" throughput under perfect conditions).
1218 * OR
1219 * 2) "Active" mode has been working perfectly or very well
1220 * and expected "search" throughput (under perfect
1221 * conditions) at candidate rate is above expected
1222 * "active" throughput (under perfect conditions).
1224 if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) &&
1225 ((active_sr > IWL_RATE_DECREASE_TH) &&
1226 (active_sr <= IWL_RATE_HIGH_TH) &&
1227 (tpt_tbl[rate] <= active_tpt))) ||
1228 ((active_sr >= IWL_RATE_SCALE_SWITCH) &&
1229 (tpt_tbl[rate] > active_tpt))) {
1231 /* (2nd or later pass)
1232 * If we've already tried to raise the rate, and are
1233 * now trying to lower it, use the higher rate. */
1234 if (start_hi != IWL_RATE_INVALID) {
1235 new_rate = start_hi;
1236 break;
1239 new_rate = rate;
1241 /* Loop again with lower rate */
1242 if (low != IWL_RATE_INVALID)
1243 rate = low;
1245 /* Lower rate not available, use the original */
1246 else
1247 break;
1249 /* Else try to raise the "search" rate to match "active" */
1250 } else {
1251 /* (2nd or later pass)
1252 * If we've already tried to lower the rate, and are
1253 * now trying to raise it, use the lower rate. */
1254 if (new_rate != IWL_RATE_INVALID)
1255 break;
1257 /* Loop again with higher rate */
1258 else if (high != IWL_RATE_INVALID) {
1259 start_hi = high;
1260 rate = high;
1262 /* Higher rate not available, use the original */
1263 } else {
1264 new_rate = rate;
1265 break;
1270 return new_rate;
1274 * Set up search table for MIMO2
1276 static int rs_switch_to_mimo2(struct iwl_priv *priv,
1277 struct iwl_lq_sta *lq_sta,
1278 struct ieee80211_conf *conf,
1279 struct ieee80211_sta *sta,
1280 struct iwl_scale_tbl_info *tbl, int index)
1282 u16 rate_mask;
1283 s32 rate;
1284 s8 is_green = lq_sta->is_green;
1285 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
1286 struct iwl_rxon_context *ctx = sta_priv->ctx;
1288 if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
1289 return -1;
1291 if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
1292 == WLAN_HT_CAP_SM_PS_STATIC)
1293 return -1;
1295 /* Need both Tx chains/antennas to support MIMO */
1296 if (hw_params(priv).tx_chains_num < 2)
1297 return -1;
1299 IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO2\n");
1301 tbl->lq_type = LQ_MIMO2;
1302 tbl->is_dup = lq_sta->is_dup;
1303 tbl->action = 0;
1304 tbl->max_search = IWL_MAX_SEARCH;
1305 rate_mask = lq_sta->active_mimo2_rate;
1307 if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
1308 tbl->is_ht40 = 1;
1309 else
1310 tbl->is_ht40 = 0;
1312 rs_set_expected_tpt_table(lq_sta, tbl);
1314 rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
1316 IWL_DEBUG_RATE(priv, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
1317 if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
1318 IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
1319 rate, rate_mask);
1320 return -1;
1322 tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
1324 IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
1325 tbl->current_rate, is_green);
1326 return 0;
1330 * Set up search table for MIMO3
1332 static int rs_switch_to_mimo3(struct iwl_priv *priv,
1333 struct iwl_lq_sta *lq_sta,
1334 struct ieee80211_conf *conf,
1335 struct ieee80211_sta *sta,
1336 struct iwl_scale_tbl_info *tbl, int index)
1338 u16 rate_mask;
1339 s32 rate;
1340 s8 is_green = lq_sta->is_green;
1341 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
1342 struct iwl_rxon_context *ctx = sta_priv->ctx;
1344 if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
1345 return -1;
1347 if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
1348 == WLAN_HT_CAP_SM_PS_STATIC)
1349 return -1;
1351 /* Need both Tx chains/antennas to support MIMO */
1352 if (hw_params(priv).tx_chains_num < 3)
1353 return -1;
1355 IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO3\n");
1357 tbl->lq_type = LQ_MIMO3;
1358 tbl->is_dup = lq_sta->is_dup;
1359 tbl->action = 0;
1360 tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
1361 rate_mask = lq_sta->active_mimo3_rate;
1363 if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
1364 tbl->is_ht40 = 1;
1365 else
1366 tbl->is_ht40 = 0;
1368 rs_set_expected_tpt_table(lq_sta, tbl);
1370 rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
1372 IWL_DEBUG_RATE(priv, "LQ: MIMO3 best rate %d mask %X\n",
1373 rate, rate_mask);
1374 if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
1375 IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
1376 rate, rate_mask);
1377 return -1;
1379 tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
1381 IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
1382 tbl->current_rate, is_green);
1383 return 0;
1387 * Set up search table for SISO
1389 static int rs_switch_to_siso(struct iwl_priv *priv,
1390 struct iwl_lq_sta *lq_sta,
1391 struct ieee80211_conf *conf,
1392 struct ieee80211_sta *sta,
1393 struct iwl_scale_tbl_info *tbl, int index)
1395 u16 rate_mask;
1396 u8 is_green = lq_sta->is_green;
1397 s32 rate;
1398 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
1399 struct iwl_rxon_context *ctx = sta_priv->ctx;
1401 if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
1402 return -1;
1404 IWL_DEBUG_RATE(priv, "LQ: try to switch to SISO\n");
1406 tbl->is_dup = lq_sta->is_dup;
1407 tbl->lq_type = LQ_SISO;
1408 tbl->action = 0;
1409 tbl->max_search = IWL_MAX_SEARCH;
1410 rate_mask = lq_sta->active_siso_rate;
1412 if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
1413 tbl->is_ht40 = 1;
1414 else
1415 tbl->is_ht40 = 0;
1417 if (is_green)
1418 tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/
1420 rs_set_expected_tpt_table(lq_sta, tbl);
1421 rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
1423 IWL_DEBUG_RATE(priv, "LQ: get best rate %d mask %X\n", rate, rate_mask);
1424 if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
1425 IWL_DEBUG_RATE(priv, "can not switch with index %d rate mask %x\n",
1426 rate, rate_mask);
1427 return -1;
1429 tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
1430 IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
1431 tbl->current_rate, is_green);
1432 return 0;
1436 * Try to switch to new modulation mode from legacy
1438 static int rs_move_legacy_other(struct iwl_priv *priv,
1439 struct iwl_lq_sta *lq_sta,
1440 struct ieee80211_conf *conf,
1441 struct ieee80211_sta *sta,
1442 int index)
1444 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1445 struct iwl_scale_tbl_info *search_tbl =
1446 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1447 struct iwl_rate_scale_data *window = &(tbl->win[index]);
1448 u32 sz = (sizeof(struct iwl_scale_tbl_info) -
1449 (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
1450 u8 start_action;
1451 u8 valid_tx_ant = hw_params(priv).valid_tx_ant;
1452 u8 tx_chains_num = hw_params(priv).tx_chains_num;
1453 int ret = 0;
1454 u8 update_search_tbl_counter = 0;
1456 switch (priv->bt_traffic_load) {
1457 case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
1458 /* nothing */
1459 break;
1460 case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
1461 /* avoid antenna B unless MIMO */
1462 valid_tx_ant =
1463 first_antenna(hw_params(priv).valid_tx_ant);
1464 if (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2)
1465 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1466 break;
1467 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
1468 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
1469 /* avoid antenna B and MIMO */
1470 valid_tx_ant =
1471 first_antenna(hw_params(priv).valid_tx_ant);
1472 if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2 &&
1473 tbl->action != IWL_LEGACY_SWITCH_SISO)
1474 tbl->action = IWL_LEGACY_SWITCH_SISO;
1475 break;
1476 default:
1477 IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
1478 break;
1481 if (!iwl_ht_enabled(priv))
1482 /* stay in Legacy */
1483 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1484 else if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
1485 tbl->action > IWL_LEGACY_SWITCH_SISO)
1486 tbl->action = IWL_LEGACY_SWITCH_SISO;
1488 /* configure as 1x1 if bt full concurrency */
1489 if (priv->bt_full_concurrent) {
1490 if (!iwl_ht_enabled(priv))
1491 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1492 else if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
1493 tbl->action = IWL_LEGACY_SWITCH_SISO;
1494 valid_tx_ant =
1495 first_antenna(hw_params(priv).valid_tx_ant);
1498 start_action = tbl->action;
1499 for (; ;) {
1500 lq_sta->action_counter++;
1501 switch (tbl->action) {
1502 case IWL_LEGACY_SWITCH_ANTENNA1:
1503 case IWL_LEGACY_SWITCH_ANTENNA2:
1504 IWL_DEBUG_RATE(priv, "LQ: Legacy toggle Antenna\n");
1506 if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 &&
1507 tx_chains_num <= 1) ||
1508 (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 &&
1509 tx_chains_num <= 2))
1510 break;
1512 /* Don't change antenna if success has been great */
1513 if (window->success_ratio >= IWL_RS_GOOD_RATIO &&
1514 !priv->bt_full_concurrent &&
1515 priv->bt_traffic_load ==
1516 IWL_BT_COEX_TRAFFIC_LOAD_NONE)
1517 break;
1519 /* Set up search table to try other antenna */
1520 memcpy(search_tbl, tbl, sz);
1522 if (rs_toggle_antenna(valid_tx_ant,
1523 &search_tbl->current_rate, search_tbl)) {
1524 update_search_tbl_counter = 1;
1525 rs_set_expected_tpt_table(lq_sta, search_tbl);
1526 goto out;
1528 break;
1529 case IWL_LEGACY_SWITCH_SISO:
1530 IWL_DEBUG_RATE(priv, "LQ: Legacy switch to SISO\n");
1532 /* Set up search table to try SISO */
1533 memcpy(search_tbl, tbl, sz);
1534 search_tbl->is_SGI = 0;
1535 ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
1536 search_tbl, index);
1537 if (!ret) {
1538 lq_sta->action_counter = 0;
1539 goto out;
1542 break;
1543 case IWL_LEGACY_SWITCH_MIMO2_AB:
1544 case IWL_LEGACY_SWITCH_MIMO2_AC:
1545 case IWL_LEGACY_SWITCH_MIMO2_BC:
1546 IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO2\n");
1548 /* Set up search table to try MIMO */
1549 memcpy(search_tbl, tbl, sz);
1550 search_tbl->is_SGI = 0;
1552 if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB)
1553 search_tbl->ant_type = ANT_AB;
1554 else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC)
1555 search_tbl->ant_type = ANT_AC;
1556 else
1557 search_tbl->ant_type = ANT_BC;
1559 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1560 break;
1562 ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
1563 search_tbl, index);
1564 if (!ret) {
1565 lq_sta->action_counter = 0;
1566 goto out;
1568 break;
1570 case IWL_LEGACY_SWITCH_MIMO3_ABC:
1571 IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO3\n");
1573 /* Set up search table to try MIMO3 */
1574 memcpy(search_tbl, tbl, sz);
1575 search_tbl->is_SGI = 0;
1577 search_tbl->ant_type = ANT_ABC;
1579 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1580 break;
1582 ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
1583 search_tbl, index);
1584 if (!ret) {
1585 lq_sta->action_counter = 0;
1586 goto out;
1588 break;
1590 tbl->action++;
1591 if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
1592 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1594 if (tbl->action == start_action)
1595 break;
1598 search_tbl->lq_type = LQ_NONE;
1599 return 0;
1601 out:
1602 lq_sta->search_better_tbl = 1;
1603 tbl->action++;
1604 if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
1605 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1606 if (update_search_tbl_counter)
1607 search_tbl->action = tbl->action;
1608 return 0;
1613 * Try to switch to new modulation mode from SISO
1615 static int rs_move_siso_to_other(struct iwl_priv *priv,
1616 struct iwl_lq_sta *lq_sta,
1617 struct ieee80211_conf *conf,
1618 struct ieee80211_sta *sta, int index)
1620 u8 is_green = lq_sta->is_green;
1621 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1622 struct iwl_scale_tbl_info *search_tbl =
1623 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1624 struct iwl_rate_scale_data *window = &(tbl->win[index]);
1625 struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
1626 u32 sz = (sizeof(struct iwl_scale_tbl_info) -
1627 (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
1628 u8 start_action;
1629 u8 valid_tx_ant = hw_params(priv).valid_tx_ant;
1630 u8 tx_chains_num = hw_params(priv).tx_chains_num;
1631 u8 update_search_tbl_counter = 0;
1632 int ret;
1634 switch (priv->bt_traffic_load) {
1635 case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
1636 /* nothing */
1637 break;
1638 case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
1639 /* avoid antenna B unless MIMO */
1640 valid_tx_ant =
1641 first_antenna(hw_params(priv).valid_tx_ant);
1642 if (tbl->action == IWL_SISO_SWITCH_ANTENNA2)
1643 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1644 break;
1645 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
1646 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
1647 /* avoid antenna B and MIMO */
1648 valid_tx_ant =
1649 first_antenna(hw_params(priv).valid_tx_ant);
1650 if (tbl->action != IWL_SISO_SWITCH_ANTENNA1)
1651 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1652 break;
1653 default:
1654 IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
1655 break;
1658 if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
1659 tbl->action > IWL_SISO_SWITCH_ANTENNA2) {
1660 /* stay in SISO */
1661 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1664 /* configure as 1x1 if bt full concurrency */
1665 if (priv->bt_full_concurrent) {
1666 valid_tx_ant =
1667 first_antenna(hw_params(priv).valid_tx_ant);
1668 if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
1669 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1672 start_action = tbl->action;
1673 for (;;) {
1674 lq_sta->action_counter++;
1675 switch (tbl->action) {
1676 case IWL_SISO_SWITCH_ANTENNA1:
1677 case IWL_SISO_SWITCH_ANTENNA2:
1678 IWL_DEBUG_RATE(priv, "LQ: SISO toggle Antenna\n");
1679 if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 &&
1680 tx_chains_num <= 1) ||
1681 (tbl->action == IWL_SISO_SWITCH_ANTENNA2 &&
1682 tx_chains_num <= 2))
1683 break;
1685 if (window->success_ratio >= IWL_RS_GOOD_RATIO &&
1686 !priv->bt_full_concurrent &&
1687 priv->bt_traffic_load ==
1688 IWL_BT_COEX_TRAFFIC_LOAD_NONE)
1689 break;
1691 memcpy(search_tbl, tbl, sz);
1692 if (rs_toggle_antenna(valid_tx_ant,
1693 &search_tbl->current_rate, search_tbl)) {
1694 update_search_tbl_counter = 1;
1695 goto out;
1697 break;
1698 case IWL_SISO_SWITCH_MIMO2_AB:
1699 case IWL_SISO_SWITCH_MIMO2_AC:
1700 case IWL_SISO_SWITCH_MIMO2_BC:
1701 IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO2\n");
1702 memcpy(search_tbl, tbl, sz);
1703 search_tbl->is_SGI = 0;
1705 if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB)
1706 search_tbl->ant_type = ANT_AB;
1707 else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC)
1708 search_tbl->ant_type = ANT_AC;
1709 else
1710 search_tbl->ant_type = ANT_BC;
1712 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1713 break;
1715 ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
1716 search_tbl, index);
1717 if (!ret)
1718 goto out;
1719 break;
1720 case IWL_SISO_SWITCH_GI:
1721 if (!tbl->is_ht40 && !(ht_cap->cap &
1722 IEEE80211_HT_CAP_SGI_20))
1723 break;
1724 if (tbl->is_ht40 && !(ht_cap->cap &
1725 IEEE80211_HT_CAP_SGI_40))
1726 break;
1728 IWL_DEBUG_RATE(priv, "LQ: SISO toggle SGI/NGI\n");
1730 memcpy(search_tbl, tbl, sz);
1731 if (is_green) {
1732 if (!tbl->is_SGI)
1733 break;
1734 else
1735 IWL_ERR(priv,
1736 "SGI was set in GF+SISO\n");
1738 search_tbl->is_SGI = !tbl->is_SGI;
1739 rs_set_expected_tpt_table(lq_sta, search_tbl);
1740 if (tbl->is_SGI) {
1741 s32 tpt = lq_sta->last_tpt / 100;
1742 if (tpt >= search_tbl->expected_tpt[index])
1743 break;
1745 search_tbl->current_rate =
1746 rate_n_flags_from_tbl(priv, search_tbl,
1747 index, is_green);
1748 update_search_tbl_counter = 1;
1749 goto out;
1750 case IWL_SISO_SWITCH_MIMO3_ABC:
1751 IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO3\n");
1752 memcpy(search_tbl, tbl, sz);
1753 search_tbl->is_SGI = 0;
1754 search_tbl->ant_type = ANT_ABC;
1756 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1757 break;
1759 ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
1760 search_tbl, index);
1761 if (!ret)
1762 goto out;
1763 break;
1765 tbl->action++;
1766 if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
1767 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1769 if (tbl->action == start_action)
1770 break;
1772 search_tbl->lq_type = LQ_NONE;
1773 return 0;
1775 out:
1776 lq_sta->search_better_tbl = 1;
1777 tbl->action++;
1778 if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC)
1779 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1780 if (update_search_tbl_counter)
1781 search_tbl->action = tbl->action;
1783 return 0;
1787 * Try to switch to new modulation mode from MIMO2
1789 static int rs_move_mimo2_to_other(struct iwl_priv *priv,
1790 struct iwl_lq_sta *lq_sta,
1791 struct ieee80211_conf *conf,
1792 struct ieee80211_sta *sta, int index)
1794 s8 is_green = lq_sta->is_green;
1795 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1796 struct iwl_scale_tbl_info *search_tbl =
1797 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1798 struct iwl_rate_scale_data *window = &(tbl->win[index]);
1799 struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
1800 u32 sz = (sizeof(struct iwl_scale_tbl_info) -
1801 (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
1802 u8 start_action;
1803 u8 valid_tx_ant = hw_params(priv).valid_tx_ant;
1804 u8 tx_chains_num = hw_params(priv).tx_chains_num;
1805 u8 update_search_tbl_counter = 0;
1806 int ret;
1808 switch (priv->bt_traffic_load) {
1809 case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
1810 /* nothing */
1811 break;
1812 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
1813 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
1814 /* avoid antenna B and MIMO */
1815 if (tbl->action != IWL_MIMO2_SWITCH_SISO_A)
1816 tbl->action = IWL_MIMO2_SWITCH_SISO_A;
1817 break;
1818 case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
1819 /* avoid antenna B unless MIMO */
1820 if (tbl->action == IWL_MIMO2_SWITCH_SISO_B ||
1821 tbl->action == IWL_MIMO2_SWITCH_SISO_C)
1822 tbl->action = IWL_MIMO2_SWITCH_SISO_A;
1823 break;
1824 default:
1825 IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
1826 break;
1829 if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) &&
1830 (tbl->action < IWL_MIMO2_SWITCH_SISO_A ||
1831 tbl->action > IWL_MIMO2_SWITCH_SISO_C)) {
1832 /* switch in SISO */
1833 tbl->action = IWL_MIMO2_SWITCH_SISO_A;
1836 /* configure as 1x1 if bt full concurrency */
1837 if (priv->bt_full_concurrent &&
1838 (tbl->action < IWL_MIMO2_SWITCH_SISO_A ||
1839 tbl->action > IWL_MIMO2_SWITCH_SISO_C))
1840 tbl->action = IWL_MIMO2_SWITCH_SISO_A;
1842 start_action = tbl->action;
1843 for (;;) {
1844 lq_sta->action_counter++;
1845 switch (tbl->action) {
1846 case IWL_MIMO2_SWITCH_ANTENNA1:
1847 case IWL_MIMO2_SWITCH_ANTENNA2:
1848 IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle Antennas\n");
1850 if (tx_chains_num <= 2)
1851 break;
1853 if (window->success_ratio >= IWL_RS_GOOD_RATIO)
1854 break;
1856 memcpy(search_tbl, tbl, sz);
1857 if (rs_toggle_antenna(valid_tx_ant,
1858 &search_tbl->current_rate, search_tbl)) {
1859 update_search_tbl_counter = 1;
1860 goto out;
1862 break;
1863 case IWL_MIMO2_SWITCH_SISO_A:
1864 case IWL_MIMO2_SWITCH_SISO_B:
1865 case IWL_MIMO2_SWITCH_SISO_C:
1866 IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to SISO\n");
1868 /* Set up new search table for SISO */
1869 memcpy(search_tbl, tbl, sz);
1871 if (tbl->action == IWL_MIMO2_SWITCH_SISO_A)
1872 search_tbl->ant_type = ANT_A;
1873 else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B)
1874 search_tbl->ant_type = ANT_B;
1875 else
1876 search_tbl->ant_type = ANT_C;
1878 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1879 break;
1881 ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
1882 search_tbl, index);
1883 if (!ret)
1884 goto out;
1886 break;
1888 case IWL_MIMO2_SWITCH_GI:
1889 if (!tbl->is_ht40 && !(ht_cap->cap &
1890 IEEE80211_HT_CAP_SGI_20))
1891 break;
1892 if (tbl->is_ht40 && !(ht_cap->cap &
1893 IEEE80211_HT_CAP_SGI_40))
1894 break;
1896 IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle SGI/NGI\n");
1898 /* Set up new search table for MIMO2 */
1899 memcpy(search_tbl, tbl, sz);
1900 search_tbl->is_SGI = !tbl->is_SGI;
1901 rs_set_expected_tpt_table(lq_sta, search_tbl);
1903 * If active table already uses the fastest possible
1904 * modulation (dual stream with short guard interval),
1905 * and it's working well, there's no need to look
1906 * for a better type of modulation!
1908 if (tbl->is_SGI) {
1909 s32 tpt = lq_sta->last_tpt / 100;
1910 if (tpt >= search_tbl->expected_tpt[index])
1911 break;
1913 search_tbl->current_rate =
1914 rate_n_flags_from_tbl(priv, search_tbl,
1915 index, is_green);
1916 update_search_tbl_counter = 1;
1917 goto out;
1919 case IWL_MIMO2_SWITCH_MIMO3_ABC:
1920 IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to MIMO3\n");
1921 memcpy(search_tbl, tbl, sz);
1922 search_tbl->is_SGI = 0;
1923 search_tbl->ant_type = ANT_ABC;
1925 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1926 break;
1928 ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
1929 search_tbl, index);
1930 if (!ret)
1931 goto out;
1933 break;
1935 tbl->action++;
1936 if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
1937 tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
1939 if (tbl->action == start_action)
1940 break;
1942 search_tbl->lq_type = LQ_NONE;
1943 return 0;
1944 out:
1945 lq_sta->search_better_tbl = 1;
1946 tbl->action++;
1947 if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
1948 tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
1949 if (update_search_tbl_counter)
1950 search_tbl->action = tbl->action;
1952 return 0;
1957 * Try to switch to new modulation mode from MIMO3
1959 static int rs_move_mimo3_to_other(struct iwl_priv *priv,
1960 struct iwl_lq_sta *lq_sta,
1961 struct ieee80211_conf *conf,
1962 struct ieee80211_sta *sta, int index)
1964 s8 is_green = lq_sta->is_green;
1965 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1966 struct iwl_scale_tbl_info *search_tbl =
1967 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1968 struct iwl_rate_scale_data *window = &(tbl->win[index]);
1969 struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
1970 u32 sz = (sizeof(struct iwl_scale_tbl_info) -
1971 (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
1972 u8 start_action;
1973 u8 valid_tx_ant = hw_params(priv).valid_tx_ant;
1974 u8 tx_chains_num = hw_params(priv).tx_chains_num;
1975 int ret;
1976 u8 update_search_tbl_counter = 0;
1978 switch (priv->bt_traffic_load) {
1979 case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
1980 /* nothing */
1981 break;
1982 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
1983 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
1984 /* avoid antenna B and MIMO */
1985 if (tbl->action != IWL_MIMO3_SWITCH_SISO_A)
1986 tbl->action = IWL_MIMO3_SWITCH_SISO_A;
1987 break;
1988 case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
1989 /* avoid antenna B unless MIMO */
1990 if (tbl->action == IWL_MIMO3_SWITCH_SISO_B ||
1991 tbl->action == IWL_MIMO3_SWITCH_SISO_C)
1992 tbl->action = IWL_MIMO3_SWITCH_SISO_A;
1993 break;
1994 default:
1995 IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
1996 break;
1999 if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) &&
2000 (tbl->action < IWL_MIMO3_SWITCH_SISO_A ||
2001 tbl->action > IWL_MIMO3_SWITCH_SISO_C)) {
2002 /* switch in SISO */
2003 tbl->action = IWL_MIMO3_SWITCH_SISO_A;
2006 /* configure as 1x1 if bt full concurrency */
2007 if (priv->bt_full_concurrent &&
2008 (tbl->action < IWL_MIMO3_SWITCH_SISO_A ||
2009 tbl->action > IWL_MIMO3_SWITCH_SISO_C))
2010 tbl->action = IWL_MIMO3_SWITCH_SISO_A;
2012 start_action = tbl->action;
2013 for (;;) {
2014 lq_sta->action_counter++;
2015 switch (tbl->action) {
2016 case IWL_MIMO3_SWITCH_ANTENNA1:
2017 case IWL_MIMO3_SWITCH_ANTENNA2:
2018 IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle Antennas\n");
2020 if (tx_chains_num <= 3)
2021 break;
2023 if (window->success_ratio >= IWL_RS_GOOD_RATIO)
2024 break;
2026 memcpy(search_tbl, tbl, sz);
2027 if (rs_toggle_antenna(valid_tx_ant,
2028 &search_tbl->current_rate, search_tbl))
2029 goto out;
2030 break;
2031 case IWL_MIMO3_SWITCH_SISO_A:
2032 case IWL_MIMO3_SWITCH_SISO_B:
2033 case IWL_MIMO3_SWITCH_SISO_C:
2034 IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to SISO\n");
2036 /* Set up new search table for SISO */
2037 memcpy(search_tbl, tbl, sz);
2039 if (tbl->action == IWL_MIMO3_SWITCH_SISO_A)
2040 search_tbl->ant_type = ANT_A;
2041 else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B)
2042 search_tbl->ant_type = ANT_B;
2043 else
2044 search_tbl->ant_type = ANT_C;
2046 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
2047 break;
2049 ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
2050 search_tbl, index);
2051 if (!ret)
2052 goto out;
2054 break;
2056 case IWL_MIMO3_SWITCH_MIMO2_AB:
2057 case IWL_MIMO3_SWITCH_MIMO2_AC:
2058 case IWL_MIMO3_SWITCH_MIMO2_BC:
2059 IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to MIMO2\n");
2061 memcpy(search_tbl, tbl, sz);
2062 search_tbl->is_SGI = 0;
2063 if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB)
2064 search_tbl->ant_type = ANT_AB;
2065 else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC)
2066 search_tbl->ant_type = ANT_AC;
2067 else
2068 search_tbl->ant_type = ANT_BC;
2070 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
2071 break;
2073 ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
2074 search_tbl, index);
2075 if (!ret)
2076 goto out;
2078 break;
2080 case IWL_MIMO3_SWITCH_GI:
2081 if (!tbl->is_ht40 && !(ht_cap->cap &
2082 IEEE80211_HT_CAP_SGI_20))
2083 break;
2084 if (tbl->is_ht40 && !(ht_cap->cap &
2085 IEEE80211_HT_CAP_SGI_40))
2086 break;
2088 IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n");
2090 /* Set up new search table for MIMO */
2091 memcpy(search_tbl, tbl, sz);
2092 search_tbl->is_SGI = !tbl->is_SGI;
2093 rs_set_expected_tpt_table(lq_sta, search_tbl);
2095 * If active table already uses the fastest possible
2096 * modulation (dual stream with short guard interval),
2097 * and it's working well, there's no need to look
2098 * for a better type of modulation!
2100 if (tbl->is_SGI) {
2101 s32 tpt = lq_sta->last_tpt / 100;
2102 if (tpt >= search_tbl->expected_tpt[index])
2103 break;
2105 search_tbl->current_rate =
2106 rate_n_flags_from_tbl(priv, search_tbl,
2107 index, is_green);
2108 update_search_tbl_counter = 1;
2109 goto out;
2111 tbl->action++;
2112 if (tbl->action > IWL_MIMO3_SWITCH_GI)
2113 tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
2115 if (tbl->action == start_action)
2116 break;
2118 search_tbl->lq_type = LQ_NONE;
2119 return 0;
2120 out:
2121 lq_sta->search_better_tbl = 1;
2122 tbl->action++;
2123 if (tbl->action > IWL_MIMO3_SWITCH_GI)
2124 tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
2125 if (update_search_tbl_counter)
2126 search_tbl->action = tbl->action;
2128 return 0;
2133 * Check whether we should continue using same modulation mode, or
2134 * begin search for a new mode, based on:
2135 * 1) # tx successes or failures while using this mode
2136 * 2) # times calling this function
2137 * 3) elapsed time in this mode (not used, for now)
2139 static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
2141 struct iwl_scale_tbl_info *tbl;
2142 int i;
2143 int active_tbl;
2144 int flush_interval_passed = 0;
2145 struct iwl_priv *priv;
2147 priv = lq_sta->drv;
2148 active_tbl = lq_sta->active_tbl;
2150 tbl = &(lq_sta->lq_info[active_tbl]);
2152 /* If we've been disallowing search, see if we should now allow it */
2153 if (lq_sta->stay_in_tbl) {
2155 /* Elapsed time using current modulation mode */
2156 if (lq_sta->flush_timer)
2157 flush_interval_passed =
2158 time_after(jiffies,
2159 (unsigned long)(lq_sta->flush_timer +
2160 IWL_RATE_SCALE_FLUSH_INTVL));
2163 * Check if we should allow search for new modulation mode.
2164 * If many frames have failed or succeeded, or we've used
2165 * this same modulation for a long time, allow search, and
2166 * reset history stats that keep track of whether we should
2167 * allow a new search. Also (below) reset all bitmaps and
2168 * stats in active history.
2170 if (force_search ||
2171 (lq_sta->total_failed > lq_sta->max_failure_limit) ||
2172 (lq_sta->total_success > lq_sta->max_success_limit) ||
2173 ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
2174 && (flush_interval_passed))) {
2175 IWL_DEBUG_RATE(priv, "LQ: stay is expired %d %d %d\n:",
2176 lq_sta->total_failed,
2177 lq_sta->total_success,
2178 flush_interval_passed);
2180 /* Allow search for new mode */
2181 lq_sta->stay_in_tbl = 0; /* only place reset */
2182 lq_sta->total_failed = 0;
2183 lq_sta->total_success = 0;
2184 lq_sta->flush_timer = 0;
2187 * Else if we've used this modulation mode enough repetitions
2188 * (regardless of elapsed time or success/failure), reset
2189 * history bitmaps and rate-specific stats for all rates in
2190 * active table.
2192 } else {
2193 lq_sta->table_count++;
2194 if (lq_sta->table_count >=
2195 lq_sta->table_count_limit) {
2196 lq_sta->table_count = 0;
2198 IWL_DEBUG_RATE(priv, "LQ: stay in table clear win\n");
2199 for (i = 0; i < IWL_RATE_COUNT; i++)
2200 rs_rate_scale_clear_window(
2201 &(tbl->win[i]));
2205 /* If transitioning to allow "search", reset all history
2206 * bitmaps and stats in active table (this will become the new
2207 * "search" table). */
2208 if (!lq_sta->stay_in_tbl) {
2209 for (i = 0; i < IWL_RATE_COUNT; i++)
2210 rs_rate_scale_clear_window(&(tbl->win[i]));
2216 * setup rate table in uCode
2218 static void rs_update_rate_tbl(struct iwl_priv *priv,
2219 struct iwl_rxon_context *ctx,
2220 struct iwl_lq_sta *lq_sta,
2221 struct iwl_scale_tbl_info *tbl,
2222 int index, u8 is_green)
2224 u32 rate;
2226 /* Update uCode's rate table. */
2227 rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
2228 rs_fill_link_cmd(priv, lq_sta, rate);
2229 iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
2233 * Do rate scaling and search for new modulation mode.
2235 static void rs_rate_scale_perform(struct iwl_priv *priv,
2236 struct sk_buff *skb,
2237 struct ieee80211_sta *sta,
2238 struct iwl_lq_sta *lq_sta)
2240 struct ieee80211_hw *hw = priv->hw;
2241 struct ieee80211_conf *conf = &hw->conf;
2242 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2243 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
2244 int low = IWL_RATE_INVALID;
2245 int high = IWL_RATE_INVALID;
2246 int index;
2247 int i;
2248 struct iwl_rate_scale_data *window = NULL;
2249 int current_tpt = IWL_INVALID_VALUE;
2250 int low_tpt = IWL_INVALID_VALUE;
2251 int high_tpt = IWL_INVALID_VALUE;
2252 u32 fail_count;
2253 s8 scale_action = 0;
2254 u16 rate_mask;
2255 u8 update_lq = 0;
2256 struct iwl_scale_tbl_info *tbl, *tbl1;
2257 u16 rate_scale_index_msk = 0;
2258 u8 is_green = 0;
2259 u8 active_tbl = 0;
2260 u8 done_search = 0;
2261 u16 high_low;
2262 s32 sr;
2263 u8 tid = IWL_MAX_TID_COUNT;
2264 struct iwl_tid_data *tid_data;
2265 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
2266 struct iwl_rxon_context *ctx = sta_priv->ctx;
2268 IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n");
2270 /* Send management frames and NO_ACK data using lowest rate. */
2271 /* TODO: this could probably be improved.. */
2272 if (!ieee80211_is_data(hdr->frame_control) ||
2273 info->flags & IEEE80211_TX_CTL_NO_ACK)
2274 return;
2276 lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
2278 tid = rs_tl_add_packet(lq_sta, hdr);
2279 if ((tid != IWL_MAX_TID_COUNT) &&
2280 (lq_sta->tx_agg_tid_en & (1 << tid))) {
2281 tid_data = &priv->shrd->tid_data[lq_sta->lq.sta_id][tid];
2282 if (tid_data->agg.state == IWL_AGG_OFF)
2283 lq_sta->is_agg = 0;
2284 else
2285 lq_sta->is_agg = 1;
2286 } else
2287 lq_sta->is_agg = 0;
2290 * Select rate-scale / modulation-mode table to work with in
2291 * the rest of this function: "search" if searching for better
2292 * modulation mode, or "active" if doing rate scaling within a mode.
2294 if (!lq_sta->search_better_tbl)
2295 active_tbl = lq_sta->active_tbl;
2296 else
2297 active_tbl = 1 - lq_sta->active_tbl;
2299 tbl = &(lq_sta->lq_info[active_tbl]);
2300 if (is_legacy(tbl->lq_type))
2301 lq_sta->is_green = 0;
2302 else
2303 lq_sta->is_green = rs_use_green(sta);
2304 is_green = lq_sta->is_green;
2306 /* current tx rate */
2307 index = lq_sta->last_txrate_idx;
2309 IWL_DEBUG_RATE(priv, "Rate scale index %d for type %d\n", index,
2310 tbl->lq_type);
2312 /* rates available for this association, and for modulation mode */
2313 rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
2315 IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask);
2317 /* mask with station rate restriction */
2318 if (is_legacy(tbl->lq_type)) {
2319 if (lq_sta->band == IEEE80211_BAND_5GHZ)
2320 /* supp_rates has no CCK bits in A mode */
2321 rate_scale_index_msk = (u16) (rate_mask &
2322 (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
2323 else
2324 rate_scale_index_msk = (u16) (rate_mask &
2325 lq_sta->supp_rates);
2327 } else
2328 rate_scale_index_msk = rate_mask;
2330 if (!rate_scale_index_msk)
2331 rate_scale_index_msk = rate_mask;
2333 if (!((1 << index) & rate_scale_index_msk)) {
2334 IWL_ERR(priv, "Current Rate is not valid\n");
2335 if (lq_sta->search_better_tbl) {
2336 /* revert to active table if search table is not valid*/
2337 tbl->lq_type = LQ_NONE;
2338 lq_sta->search_better_tbl = 0;
2339 tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
2340 /* get "active" rate info */
2341 index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
2342 rs_update_rate_tbl(priv, ctx, lq_sta, tbl,
2343 index, is_green);
2345 return;
2348 /* Get expected throughput table and history window for current rate */
2349 if (!tbl->expected_tpt) {
2350 IWL_ERR(priv, "tbl->expected_tpt is NULL\n");
2351 return;
2354 /* force user max rate if set by user */
2355 if ((lq_sta->max_rate_idx != -1) &&
2356 (lq_sta->max_rate_idx < index)) {
2357 index = lq_sta->max_rate_idx;
2358 update_lq = 1;
2359 window = &(tbl->win[index]);
2360 goto lq_update;
2363 window = &(tbl->win[index]);
2366 * If there is not enough history to calculate actual average
2367 * throughput, keep analyzing results of more tx frames, without
2368 * changing rate or mode (bypass most of the rest of this function).
2369 * Set up new rate table in uCode only if old rate is not supported
2370 * in current association (use new rate found above).
2372 fail_count = window->counter - window->success_counter;
2373 if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
2374 (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
2375 IWL_DEBUG_RATE(priv, "LQ: still below TH. succ=%d total=%d "
2376 "for index %d\n",
2377 window->success_counter, window->counter, index);
2379 /* Can't calculate this yet; not enough history */
2380 window->average_tpt = IWL_INVALID_VALUE;
2382 /* Should we stay with this modulation mode,
2383 * or search for a new one? */
2384 rs_stay_in_table(lq_sta, false);
2386 goto out;
2388 /* Else we have enough samples; calculate estimate of
2389 * actual average throughput */
2390 if (window->average_tpt != ((window->success_ratio *
2391 tbl->expected_tpt[index] + 64) / 128)) {
2392 IWL_ERR(priv, "expected_tpt should have been calculated by now\n");
2393 window->average_tpt = ((window->success_ratio *
2394 tbl->expected_tpt[index] + 64) / 128);
2397 /* If we are searching for better modulation mode, check success. */
2398 if (lq_sta->search_better_tbl &&
2399 (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI)) {
2400 /* If good success, continue using the "search" mode;
2401 * no need to send new link quality command, since we're
2402 * continuing to use the setup that we've been trying. */
2403 if (window->average_tpt > lq_sta->last_tpt) {
2405 IWL_DEBUG_RATE(priv, "LQ: SWITCHING TO NEW TABLE "
2406 "suc=%d cur-tpt=%d old-tpt=%d\n",
2407 window->success_ratio,
2408 window->average_tpt,
2409 lq_sta->last_tpt);
2411 if (!is_legacy(tbl->lq_type))
2412 lq_sta->enable_counter = 1;
2414 /* Swap tables; "search" becomes "active" */
2415 lq_sta->active_tbl = active_tbl;
2416 current_tpt = window->average_tpt;
2418 /* Else poor success; go back to mode in "active" table */
2419 } else {
2421 IWL_DEBUG_RATE(priv, "LQ: GOING BACK TO THE OLD TABLE "
2422 "suc=%d cur-tpt=%d old-tpt=%d\n",
2423 window->success_ratio,
2424 window->average_tpt,
2425 lq_sta->last_tpt);
2427 /* Nullify "search" table */
2428 tbl->lq_type = LQ_NONE;
2430 /* Revert to "active" table */
2431 active_tbl = lq_sta->active_tbl;
2432 tbl = &(lq_sta->lq_info[active_tbl]);
2434 /* Revert to "active" rate and throughput info */
2435 index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
2436 current_tpt = lq_sta->last_tpt;
2438 /* Need to set up a new rate table in uCode */
2439 update_lq = 1;
2442 /* Either way, we've made a decision; modulation mode
2443 * search is done, allow rate adjustment next time. */
2444 lq_sta->search_better_tbl = 0;
2445 done_search = 1; /* Don't switch modes below! */
2446 goto lq_update;
2449 /* (Else) not in search of better modulation mode, try for better
2450 * starting rate, while staying in this mode. */
2451 high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk,
2452 tbl->lq_type);
2453 low = high_low & 0xff;
2454 high = (high_low >> 8) & 0xff;
2456 /* If user set max rate, dont allow higher than user constrain */
2457 if ((lq_sta->max_rate_idx != -1) &&
2458 (lq_sta->max_rate_idx < high))
2459 high = IWL_RATE_INVALID;
2461 sr = window->success_ratio;
2463 /* Collect measured throughputs for current and adjacent rates */
2464 current_tpt = window->average_tpt;
2465 if (low != IWL_RATE_INVALID)
2466 low_tpt = tbl->win[low].average_tpt;
2467 if (high != IWL_RATE_INVALID)
2468 high_tpt = tbl->win[high].average_tpt;
2470 scale_action = 0;
2472 /* Too many failures, decrease rate */
2473 if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) {
2474 IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n");
2475 scale_action = -1;
2477 /* No throughput measured yet for adjacent rates; try increase. */
2478 } else if ((low_tpt == IWL_INVALID_VALUE) &&
2479 (high_tpt == IWL_INVALID_VALUE)) {
2481 if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH)
2482 scale_action = 1;
2483 else if (low != IWL_RATE_INVALID)
2484 scale_action = 0;
2487 /* Both adjacent throughputs are measured, but neither one has better
2488 * throughput; we're using the best rate, don't change it! */
2489 else if ((low_tpt != IWL_INVALID_VALUE) &&
2490 (high_tpt != IWL_INVALID_VALUE) &&
2491 (low_tpt < current_tpt) &&
2492 (high_tpt < current_tpt))
2493 scale_action = 0;
2495 /* At least one adjacent rate's throughput is measured,
2496 * and may have better performance. */
2497 else {
2498 /* Higher adjacent rate's throughput is measured */
2499 if (high_tpt != IWL_INVALID_VALUE) {
2500 /* Higher rate has better throughput */
2501 if (high_tpt > current_tpt &&
2502 sr >= IWL_RATE_INCREASE_TH) {
2503 scale_action = 1;
2504 } else {
2505 scale_action = 0;
2508 /* Lower adjacent rate's throughput is measured */
2509 } else if (low_tpt != IWL_INVALID_VALUE) {
2510 /* Lower rate has better throughput */
2511 if (low_tpt > current_tpt) {
2512 IWL_DEBUG_RATE(priv,
2513 "decrease rate because of low tpt\n");
2514 scale_action = -1;
2515 } else if (sr >= IWL_RATE_INCREASE_TH) {
2516 scale_action = 1;
2521 /* Sanity check; asked for decrease, but success rate or throughput
2522 * has been good at old rate. Don't change it. */
2523 if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
2524 ((sr > IWL_RATE_HIGH_TH) ||
2525 (current_tpt > (100 * tbl->expected_tpt[low]))))
2526 scale_action = 0;
2527 if (!iwl_ht_enabled(priv) && !is_legacy(tbl->lq_type))
2528 scale_action = -1;
2529 if (iwl_tx_ant_restriction(priv) != IWL_ANT_OK_MULTI &&
2530 (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type)))
2531 scale_action = -1;
2533 if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) &&
2534 (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) {
2535 if (lq_sta->last_bt_traffic > priv->bt_traffic_load) {
2537 * don't set scale_action, don't want to scale up if
2538 * the rate scale doesn't otherwise think that is a
2539 * good idea.
2541 } else if (lq_sta->last_bt_traffic <= priv->bt_traffic_load) {
2542 scale_action = -1;
2545 lq_sta->last_bt_traffic = priv->bt_traffic_load;
2547 if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) &&
2548 (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) {
2549 /* search for a new modulation */
2550 rs_stay_in_table(lq_sta, true);
2551 goto lq_update;
2554 switch (scale_action) {
2555 case -1:
2556 /* Decrease starting rate, update uCode's rate table */
2557 if (low != IWL_RATE_INVALID) {
2558 update_lq = 1;
2559 index = low;
2562 break;
2563 case 1:
2564 /* Increase starting rate, update uCode's rate table */
2565 if (high != IWL_RATE_INVALID) {
2566 update_lq = 1;
2567 index = high;
2570 break;
2571 case 0:
2572 /* No change */
2573 default:
2574 break;
2577 IWL_DEBUG_RATE(priv, "choose rate scale index %d action %d low %d "
2578 "high %d type %d\n",
2579 index, scale_action, low, high, tbl->lq_type);
2581 lq_update:
2582 /* Replace uCode's rate table for the destination station. */
2583 if (update_lq)
2584 rs_update_rate_tbl(priv, ctx, lq_sta, tbl, index, is_green);
2586 if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI) {
2587 /* Should we stay with this modulation mode,
2588 * or search for a new one? */
2589 rs_stay_in_table(lq_sta, false);
2592 * Search for new modulation mode if we're:
2593 * 1) Not changing rates right now
2594 * 2) Not just finishing up a search
2595 * 3) Allowing a new search
2597 if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
2598 /* Save current throughput to compare with "search" throughput*/
2599 lq_sta->last_tpt = current_tpt;
2601 /* Select a new "search" modulation mode to try.
2602 * If one is found, set up the new "search" table. */
2603 if (is_legacy(tbl->lq_type))
2604 rs_move_legacy_other(priv, lq_sta, conf, sta, index);
2605 else if (is_siso(tbl->lq_type))
2606 rs_move_siso_to_other(priv, lq_sta, conf, sta, index);
2607 else if (is_mimo2(tbl->lq_type))
2608 rs_move_mimo2_to_other(priv, lq_sta, conf, sta, index);
2609 else
2610 rs_move_mimo3_to_other(priv, lq_sta, conf, sta, index);
2612 /* If new "search" mode was selected, set up in uCode table */
2613 if (lq_sta->search_better_tbl) {
2614 /* Access the "search" table, clear its history. */
2615 tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
2616 for (i = 0; i < IWL_RATE_COUNT; i++)
2617 rs_rate_scale_clear_window(&(tbl->win[i]));
2619 /* Use new "search" start rate */
2620 index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
2622 IWL_DEBUG_RATE(priv, "Switch current mcs: %X index: %d\n",
2623 tbl->current_rate, index);
2624 rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
2625 iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
2626 } else
2627 done_search = 1;
2630 if (done_search && !lq_sta->stay_in_tbl) {
2631 /* If the "active" (non-search) mode was legacy,
2632 * and we've tried switching antennas,
2633 * but we haven't been able to try HT modes (not available),
2634 * stay with best antenna legacy modulation for a while
2635 * before next round of mode comparisons. */
2636 tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
2637 if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) &&
2638 lq_sta->action_counter > tbl1->max_search) {
2639 IWL_DEBUG_RATE(priv, "LQ: STAY in legacy table\n");
2640 rs_set_stay_in_table(priv, 1, lq_sta);
2643 /* If we're in an HT mode, and all 3 mode switch actions
2644 * have been tried and compared, stay in this best modulation
2645 * mode for a while before next round of mode comparisons. */
2646 if (lq_sta->enable_counter &&
2647 (lq_sta->action_counter >= tbl1->max_search) &&
2648 iwl_ht_enabled(priv)) {
2649 if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
2650 (lq_sta->tx_agg_tid_en & (1 << tid)) &&
2651 (tid != IWL_MAX_TID_COUNT)) {
2652 u8 sta_id = lq_sta->lq.sta_id;
2653 tid_data =
2654 &priv->shrd->tid_data[sta_id][tid];
2655 if (tid_data->agg.state == IWL_AGG_OFF) {
2656 IWL_DEBUG_RATE(priv,
2657 "try to aggregate tid %d\n",
2658 tid);
2659 rs_tl_turn_on_agg(priv, tid,
2660 lq_sta, sta);
2663 rs_set_stay_in_table(priv, 0, lq_sta);
2667 out:
2668 tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
2669 lq_sta->last_txrate_idx = index;
2673 * rs_initialize_lq - Initialize a station's hardware rate table
2675 * The uCode's station table contains a table of fallback rates
2676 * for automatic fallback during transmission.
2678 * NOTE: This sets up a default set of values. These will be replaced later
2679 * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of
2680 * rc80211_simple.
2682 * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
2683 * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
2684 * which requires station table entry to exist).
2686 static void rs_initialize_lq(struct iwl_priv *priv,
2687 struct ieee80211_conf *conf,
2688 struct ieee80211_sta *sta,
2689 struct iwl_lq_sta *lq_sta)
2691 struct iwl_scale_tbl_info *tbl;
2692 int rate_idx;
2693 int i;
2694 u32 rate;
2695 u8 use_green = rs_use_green(sta);
2696 u8 active_tbl = 0;
2697 u8 valid_tx_ant;
2698 struct iwl_station_priv *sta_priv;
2699 struct iwl_rxon_context *ctx;
2701 if (!sta || !lq_sta)
2702 return;
2704 sta_priv = (void *)sta->drv_priv;
2705 ctx = sta_priv->ctx;
2707 i = lq_sta->last_txrate_idx;
2709 valid_tx_ant = hw_params(priv).valid_tx_ant;
2711 if (!lq_sta->search_better_tbl)
2712 active_tbl = lq_sta->active_tbl;
2713 else
2714 active_tbl = 1 - lq_sta->active_tbl;
2716 tbl = &(lq_sta->lq_info[active_tbl]);
2718 if ((i < 0) || (i >= IWL_RATE_COUNT))
2719 i = 0;
2721 rate = iwl_rates[i].plcp;
2722 tbl->ant_type = first_antenna(valid_tx_ant);
2723 rate |= tbl->ant_type << RATE_MCS_ANT_POS;
2725 if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE)
2726 rate |= RATE_MCS_CCK_MSK;
2728 rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx);
2729 if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type))
2730 rs_toggle_antenna(valid_tx_ant, &rate, tbl);
2732 rate = rate_n_flags_from_tbl(priv, tbl, rate_idx, use_green);
2733 tbl->current_rate = rate;
2734 rs_set_expected_tpt_table(lq_sta, tbl);
2735 rs_fill_link_cmd(NULL, lq_sta, rate);
2736 priv->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq;
2737 iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_SYNC, true);
2740 static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
2741 struct ieee80211_tx_rate_control *txrc)
2744 struct sk_buff *skb = txrc->skb;
2745 struct ieee80211_supported_band *sband = txrc->sband;
2746 struct iwl_priv *priv __maybe_unused = (struct iwl_priv *)priv_r;
2747 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2748 struct iwl_lq_sta *lq_sta = priv_sta;
2749 int rate_idx;
2751 IWL_DEBUG_RATE_LIMIT(priv, "rate scale calculate new rate for skb\n");
2753 /* Get max rate if user set max rate */
2754 if (lq_sta) {
2755 lq_sta->max_rate_idx = txrc->max_rate_idx;
2756 if ((sband->band == IEEE80211_BAND_5GHZ) &&
2757 (lq_sta->max_rate_idx != -1))
2758 lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE;
2759 if ((lq_sta->max_rate_idx < 0) ||
2760 (lq_sta->max_rate_idx >= IWL_RATE_COUNT))
2761 lq_sta->max_rate_idx = -1;
2764 /* Treat uninitialized rate scaling data same as non-existing. */
2765 if (lq_sta && !lq_sta->drv) {
2766 IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
2767 priv_sta = NULL;
2770 /* Send management frames and NO_ACK data using lowest rate. */
2771 if (rate_control_send_low(sta, priv_sta, txrc))
2772 return;
2774 rate_idx = lq_sta->last_txrate_idx;
2776 if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) {
2777 rate_idx -= IWL_FIRST_OFDM_RATE;
2778 /* 6M and 9M shared same MCS index */
2779 rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0;
2780 if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
2781 IWL_RATE_MIMO3_6M_PLCP)
2782 rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM);
2783 else if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
2784 IWL_RATE_MIMO2_6M_PLCP)
2785 rate_idx = rate_idx + MCS_INDEX_PER_STREAM;
2786 info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
2787 if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK)
2788 info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI;
2789 if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK)
2790 info->control.rates[0].flags |= IEEE80211_TX_RC_DUP_DATA;
2791 if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK)
2792 info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
2793 if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK)
2794 info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD;
2795 } else {
2796 /* Check for invalid rates */
2797 if ((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT_LEGACY) ||
2798 ((sband->band == IEEE80211_BAND_5GHZ) &&
2799 (rate_idx < IWL_FIRST_OFDM_RATE)))
2800 rate_idx = rate_lowest_index(sband, sta);
2801 /* On valid 5 GHz rate, adjust index */
2802 else if (sband->band == IEEE80211_BAND_5GHZ)
2803 rate_idx -= IWL_FIRST_OFDM_RATE;
2804 info->control.rates[0].flags = 0;
2806 info->control.rates[0].idx = rate_idx;
2810 static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta,
2811 gfp_t gfp)
2813 struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv;
2814 struct iwl_priv *priv;
2816 priv = (struct iwl_priv *)priv_rate;
2817 IWL_DEBUG_RATE(priv, "create station rate scale window\n");
2819 return &sta_priv->lq_sta;
2823 * Called after adding a new station to initialize rate scaling
2825 void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id)
2827 int i, j;
2828 struct ieee80211_hw *hw = priv->hw;
2829 struct ieee80211_conf *conf = &priv->hw->conf;
2830 struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
2831 struct iwl_station_priv *sta_priv;
2832 struct iwl_lq_sta *lq_sta;
2833 struct ieee80211_supported_band *sband;
2835 sta_priv = (struct iwl_station_priv *) sta->drv_priv;
2836 lq_sta = &sta_priv->lq_sta;
2837 sband = hw->wiphy->bands[conf->channel->band];
2840 lq_sta->lq.sta_id = sta_id;
2842 for (j = 0; j < LQ_SIZE; j++)
2843 for (i = 0; i < IWL_RATE_COUNT; i++)
2844 rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
2846 lq_sta->flush_timer = 0;
2847 lq_sta->supp_rates = sta->supp_rates[sband->band];
2848 for (j = 0; j < LQ_SIZE; j++)
2849 for (i = 0; i < IWL_RATE_COUNT; i++)
2850 rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
2852 IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init for station %d ***\n",
2853 sta_id);
2854 /* TODO: what is a good starting rate for STA? About middle? Maybe not
2855 * the lowest or the highest rate.. Could consider using RSSI from
2856 * previous packets? Need to have IEEE 802.1X auth succeed immediately
2857 * after assoc.. */
2859 lq_sta->is_dup = 0;
2860 lq_sta->max_rate_idx = -1;
2861 lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX;
2862 lq_sta->is_green = rs_use_green(sta);
2863 lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000);
2864 lq_sta->band = priv->band;
2866 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
2867 * supp_rates[] does not; shift to convert format, force 9 MBits off.
2869 lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1;
2870 lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1;
2871 lq_sta->active_siso_rate &= ~((u16)0x2);
2872 lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE;
2874 /* Same here */
2875 lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1;
2876 lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1;
2877 lq_sta->active_mimo2_rate &= ~((u16)0x2);
2878 lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
2880 lq_sta->active_mimo3_rate = ht_cap->mcs.rx_mask[2] << 1;
2881 lq_sta->active_mimo3_rate |= ht_cap->mcs.rx_mask[2] & 0x1;
2882 lq_sta->active_mimo3_rate &= ~((u16)0x2);
2883 lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
2885 IWL_DEBUG_RATE(priv, "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
2886 lq_sta->active_siso_rate,
2887 lq_sta->active_mimo2_rate,
2888 lq_sta->active_mimo3_rate);
2890 /* These values will be overridden later */
2891 lq_sta->lq.general_params.single_stream_ant_msk =
2892 first_antenna(hw_params(priv).valid_tx_ant);
2893 lq_sta->lq.general_params.dual_stream_ant_msk =
2894 hw_params(priv).valid_tx_ant &
2895 ~first_antenna(hw_params(priv).valid_tx_ant);
2896 if (!lq_sta->lq.general_params.dual_stream_ant_msk) {
2897 lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
2898 } else if (num_of_ant(hw_params(priv).valid_tx_ant) == 2) {
2899 lq_sta->lq.general_params.dual_stream_ant_msk =
2900 hw_params(priv).valid_tx_ant;
2903 /* as default allow aggregation for all tids */
2904 lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
2905 lq_sta->drv = priv;
2907 /* Set last_txrate_idx to lowest rate */
2908 lq_sta->last_txrate_idx = rate_lowest_index(sband, sta);
2909 if (sband->band == IEEE80211_BAND_5GHZ)
2910 lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
2911 lq_sta->is_agg = 0;
2912 #ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
2913 priv->tm_fixed_rate = 0;
2914 #endif
2915 #ifdef CONFIG_MAC80211_DEBUGFS
2916 lq_sta->dbg_fixed_rate = 0;
2917 #endif
2919 rs_initialize_lq(priv, conf, sta, lq_sta);
2922 static void rs_fill_link_cmd(struct iwl_priv *priv,
2923 struct iwl_lq_sta *lq_sta, u32 new_rate)
2925 struct iwl_scale_tbl_info tbl_type;
2926 int index = 0;
2927 int rate_idx;
2928 int repeat_rate = 0;
2929 u8 ant_toggle_cnt = 0;
2930 u8 use_ht_possible = 1;
2931 u8 valid_tx_ant = 0;
2932 struct iwl_station_priv *sta_priv =
2933 container_of(lq_sta, struct iwl_station_priv, lq_sta);
2934 struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq;
2936 /* Override starting rate (index 0) if needed for debug purposes */
2937 rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
2939 /* Interpret new_rate (rate_n_flags) */
2940 rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
2941 &tbl_type, &rate_idx);
2943 if (priv && priv->bt_full_concurrent) {
2944 /* 1x1 only */
2945 tbl_type.ant_type =
2946 first_antenna(hw_params(priv).valid_tx_ant);
2949 /* How many times should we repeat the initial rate? */
2950 if (is_legacy(tbl_type.lq_type)) {
2951 ant_toggle_cnt = 1;
2952 repeat_rate = IWL_NUMBER_TRY;
2953 } else {
2954 repeat_rate = min(IWL_HT_NUMBER_TRY,
2955 LINK_QUAL_AGG_DISABLE_START_DEF - 1);
2958 lq_cmd->general_params.mimo_delimiter =
2959 is_mimo(tbl_type.lq_type) ? 1 : 0;
2961 /* Fill 1st table entry (index 0) */
2962 lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
2964 if (num_of_ant(tbl_type.ant_type) == 1) {
2965 lq_cmd->general_params.single_stream_ant_msk =
2966 tbl_type.ant_type;
2967 } else if (num_of_ant(tbl_type.ant_type) == 2) {
2968 lq_cmd->general_params.dual_stream_ant_msk =
2969 tbl_type.ant_type;
2970 } /* otherwise we don't modify the existing value */
2972 index++;
2973 repeat_rate--;
2974 if (priv) {
2975 if (priv->bt_full_concurrent)
2976 valid_tx_ant = ANT_A;
2977 else
2978 valid_tx_ant = hw_params(priv).valid_tx_ant;
2981 /* Fill rest of rate table */
2982 while (index < LINK_QUAL_MAX_RETRY_NUM) {
2983 /* Repeat initial/next rate.
2984 * For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
2985 * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
2986 while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) {
2987 if (is_legacy(tbl_type.lq_type)) {
2988 if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
2989 ant_toggle_cnt++;
2990 else if (priv &&
2991 rs_toggle_antenna(valid_tx_ant,
2992 &new_rate, &tbl_type))
2993 ant_toggle_cnt = 1;
2996 /* Override next rate if needed for debug purposes */
2997 rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
2999 /* Fill next table entry */
3000 lq_cmd->rs_table[index].rate_n_flags =
3001 cpu_to_le32(new_rate);
3002 repeat_rate--;
3003 index++;
3006 rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type,
3007 &rate_idx);
3009 if (priv && priv->bt_full_concurrent) {
3010 /* 1x1 only */
3011 tbl_type.ant_type =
3012 first_antenna(hw_params(priv).valid_tx_ant);
3015 /* Indicate to uCode which entries might be MIMO.
3016 * If initial rate was MIMO, this will finally end up
3017 * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
3018 if (is_mimo(tbl_type.lq_type))
3019 lq_cmd->general_params.mimo_delimiter = index;
3021 /* Get next rate */
3022 new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
3023 use_ht_possible);
3025 /* How many times should we repeat the next rate? */
3026 if (is_legacy(tbl_type.lq_type)) {
3027 if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
3028 ant_toggle_cnt++;
3029 else if (priv &&
3030 rs_toggle_antenna(valid_tx_ant,
3031 &new_rate, &tbl_type))
3032 ant_toggle_cnt = 1;
3034 repeat_rate = IWL_NUMBER_TRY;
3035 } else {
3036 repeat_rate = IWL_HT_NUMBER_TRY;
3039 /* Don't allow HT rates after next pass.
3040 * rs_get_lower_rate() will change type to LQ_A or LQ_G. */
3041 use_ht_possible = 0;
3043 /* Override next rate if needed for debug purposes */
3044 rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
3046 /* Fill next table entry */
3047 lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
3049 index++;
3050 repeat_rate--;
3053 lq_cmd->agg_params.agg_frame_cnt_limit =
3054 sta_priv->max_agg_bufsize ?: LINK_QUAL_AGG_FRAME_LIMIT_DEF;
3055 lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
3057 lq_cmd->agg_params.agg_time_limit =
3058 cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
3060 * overwrite if needed, pass aggregation time limit
3061 * to uCode in uSec
3063 if (priv && priv->cfg->bt_params &&
3064 priv->cfg->bt_params->agg_time_limit &&
3065 priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)
3066 lq_cmd->agg_params.agg_time_limit =
3067 cpu_to_le16(priv->cfg->bt_params->agg_time_limit);
3070 static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
3072 return hw->priv;
3074 /* rate scale requires free function to be implemented */
3075 static void rs_free(void *priv_rate)
3077 return;
3080 static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta,
3081 void *priv_sta)
3083 struct iwl_priv *priv __maybe_unused = priv_r;
3085 IWL_DEBUG_RATE(priv, "enter\n");
3086 IWL_DEBUG_RATE(priv, "leave\n");
3089 #ifdef CONFIG_MAC80211_DEBUGFS
3090 static int open_file_generic(struct inode *inode, struct file *file)
3092 file->private_data = inode->i_private;
3093 return 0;
3095 static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
3096 u32 *rate_n_flags, int index)
3098 struct iwl_priv *priv;
3099 u8 valid_tx_ant;
3100 u8 ant_sel_tx;
3102 priv = lq_sta->drv;
3103 valid_tx_ant = hw_params(priv).valid_tx_ant;
3104 if (lq_sta->dbg_fixed_rate) {
3105 ant_sel_tx =
3106 ((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK)
3107 >> RATE_MCS_ANT_POS);
3108 if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) {
3109 *rate_n_flags = lq_sta->dbg_fixed_rate;
3110 IWL_DEBUG_RATE(priv, "Fixed rate ON\n");
3111 } else {
3112 lq_sta->dbg_fixed_rate = 0;
3113 IWL_ERR(priv,
3114 "Invalid antenna selection 0x%X, Valid is 0x%X\n",
3115 ant_sel_tx, valid_tx_ant);
3116 IWL_DEBUG_RATE(priv, "Fixed rate OFF\n");
3118 } else {
3119 IWL_DEBUG_RATE(priv, "Fixed rate OFF\n");
3123 static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
3124 const char __user *user_buf, size_t count, loff_t *ppos)
3126 struct iwl_lq_sta *lq_sta = file->private_data;
3127 struct iwl_priv *priv;
3128 char buf[64];
3129 size_t buf_size;
3130 u32 parsed_rate;
3133 priv = lq_sta->drv;
3134 memset(buf, 0, sizeof(buf));
3135 buf_size = min(count, sizeof(buf) - 1);
3136 if (copy_from_user(buf, user_buf, buf_size))
3137 return -EFAULT;
3139 if (sscanf(buf, "%x", &parsed_rate) == 1)
3140 lq_sta->dbg_fixed_rate = parsed_rate;
3141 else
3142 lq_sta->dbg_fixed_rate = 0;
3144 rs_program_fix_rate(priv, lq_sta);
3146 return count;
3149 static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
3150 char __user *user_buf, size_t count, loff_t *ppos)
3152 char *buff;
3153 int desc = 0;
3154 int i = 0;
3155 int index = 0;
3156 ssize_t ret;
3158 struct iwl_lq_sta *lq_sta = file->private_data;
3159 struct iwl_priv *priv;
3160 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
3162 priv = lq_sta->drv;
3163 buff = kmalloc(1024, GFP_KERNEL);
3164 if (!buff)
3165 return -ENOMEM;
3167 desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id);
3168 desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n",
3169 lq_sta->total_failed, lq_sta->total_success,
3170 lq_sta->active_legacy_rate);
3171 desc += sprintf(buff+desc, "fixed rate 0x%X\n",
3172 lq_sta->dbg_fixed_rate);
3173 desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n",
3174 (hw_params(priv).valid_tx_ant & ANT_A) ? "ANT_A," : "",
3175 (hw_params(priv).valid_tx_ant & ANT_B) ? "ANT_B," : "",
3176 (hw_params(priv).valid_tx_ant & ANT_C) ? "ANT_C" : "");
3177 desc += sprintf(buff+desc, "lq type %s\n",
3178 (is_legacy(tbl->lq_type)) ? "legacy" : "HT");
3179 if (is_Ht(tbl->lq_type)) {
3180 desc += sprintf(buff+desc, " %s",
3181 (is_siso(tbl->lq_type)) ? "SISO" :
3182 ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3"));
3183 desc += sprintf(buff+desc, " %s",
3184 (tbl->is_ht40) ? "40MHz" : "20MHz");
3185 desc += sprintf(buff+desc, " %s %s %s\n", (tbl->is_SGI) ? "SGI" : "",
3186 (lq_sta->is_green) ? "GF enabled" : "",
3187 (lq_sta->is_agg) ? "AGG on" : "");
3189 desc += sprintf(buff+desc, "last tx rate=0x%X\n",
3190 lq_sta->last_rate_n_flags);
3191 desc += sprintf(buff+desc, "general:"
3192 "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
3193 lq_sta->lq.general_params.flags,
3194 lq_sta->lq.general_params.mimo_delimiter,
3195 lq_sta->lq.general_params.single_stream_ant_msk,
3196 lq_sta->lq.general_params.dual_stream_ant_msk);
3198 desc += sprintf(buff+desc, "agg:"
3199 "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
3200 le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
3201 lq_sta->lq.agg_params.agg_dis_start_th,
3202 lq_sta->lq.agg_params.agg_frame_cnt_limit);
3204 desc += sprintf(buff+desc,
3205 "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
3206 lq_sta->lq.general_params.start_rate_index[0],
3207 lq_sta->lq.general_params.start_rate_index[1],
3208 lq_sta->lq.general_params.start_rate_index[2],
3209 lq_sta->lq.general_params.start_rate_index[3]);
3211 for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
3212 index = iwl_hwrate_to_plcp_idx(
3213 le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
3214 if (is_legacy(tbl->lq_type)) {
3215 desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n",
3216 i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
3217 iwl_rate_mcs[index].mbps);
3218 } else {
3219 desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps (%s)\n",
3220 i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
3221 iwl_rate_mcs[index].mbps, iwl_rate_mcs[index].mcs);
3225 ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
3226 kfree(buff);
3227 return ret;
3230 static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
3231 .write = rs_sta_dbgfs_scale_table_write,
3232 .read = rs_sta_dbgfs_scale_table_read,
3233 .open = open_file_generic,
3234 .llseek = default_llseek,
3236 static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
3237 char __user *user_buf, size_t count, loff_t *ppos)
3239 char *buff;
3240 int desc = 0;
3241 int i, j;
3242 ssize_t ret;
3244 struct iwl_lq_sta *lq_sta = file->private_data;
3246 buff = kmalloc(1024, GFP_KERNEL);
3247 if (!buff)
3248 return -ENOMEM;
3250 for (i = 0; i < LQ_SIZE; i++) {
3251 desc += sprintf(buff+desc,
3252 "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n"
3253 "rate=0x%X\n",
3254 lq_sta->active_tbl == i ? "*" : "x",
3255 lq_sta->lq_info[i].lq_type,
3256 lq_sta->lq_info[i].is_SGI,
3257 lq_sta->lq_info[i].is_ht40,
3258 lq_sta->lq_info[i].is_dup,
3259 lq_sta->is_green,
3260 lq_sta->lq_info[i].current_rate);
3261 for (j = 0; j < IWL_RATE_COUNT; j++) {
3262 desc += sprintf(buff+desc,
3263 "counter=%d success=%d %%=%d\n",
3264 lq_sta->lq_info[i].win[j].counter,
3265 lq_sta->lq_info[i].win[j].success_counter,
3266 lq_sta->lq_info[i].win[j].success_ratio);
3269 ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
3270 kfree(buff);
3271 return ret;
3274 static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
3275 .read = rs_sta_dbgfs_stats_table_read,
3276 .open = open_file_generic,
3277 .llseek = default_llseek,
3280 static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file,
3281 char __user *user_buf, size_t count, loff_t *ppos)
3283 struct iwl_lq_sta *lq_sta = file->private_data;
3284 struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl];
3285 char buff[120];
3286 int desc = 0;
3288 if (is_Ht(tbl->lq_type))
3289 desc += sprintf(buff+desc,
3290 "Bit Rate= %d Mb/s\n",
3291 tbl->expected_tpt[lq_sta->last_txrate_idx]);
3292 else
3293 desc += sprintf(buff+desc,
3294 "Bit Rate= %d Mb/s\n",
3295 iwl_rates[lq_sta->last_txrate_idx].ieee >> 1);
3297 return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
3300 static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = {
3301 .read = rs_sta_dbgfs_rate_scale_data_read,
3302 .open = open_file_generic,
3303 .llseek = default_llseek,
3306 static void rs_add_debugfs(void *priv, void *priv_sta,
3307 struct dentry *dir)
3309 struct iwl_lq_sta *lq_sta = priv_sta;
3310 lq_sta->rs_sta_dbgfs_scale_table_file =
3311 debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir,
3312 lq_sta, &rs_sta_dbgfs_scale_table_ops);
3313 lq_sta->rs_sta_dbgfs_stats_table_file =
3314 debugfs_create_file("rate_stats_table", S_IRUSR, dir,
3315 lq_sta, &rs_sta_dbgfs_stats_table_ops);
3316 lq_sta->rs_sta_dbgfs_rate_scale_data_file =
3317 debugfs_create_file("rate_scale_data", S_IRUSR, dir,
3318 lq_sta, &rs_sta_dbgfs_rate_scale_data_ops);
3319 lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
3320 debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir,
3321 &lq_sta->tx_agg_tid_en);
3325 static void rs_remove_debugfs(void *priv, void *priv_sta)
3327 struct iwl_lq_sta *lq_sta = priv_sta;
3328 debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
3329 debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
3330 debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file);
3331 debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
3333 #endif
3336 * Initialization of rate scaling information is done by driver after
3337 * the station is added. Since mac80211 calls this function before a
3338 * station is added we ignore it.
3340 static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband,
3341 struct ieee80211_sta *sta, void *priv_sta)
3344 static struct rate_control_ops rs_ops = {
3345 .module = NULL,
3346 .name = RS_NAME,
3347 .tx_status = rs_tx_status,
3348 .get_rate = rs_get_rate,
3349 .rate_init = rs_rate_init_stub,
3350 .alloc = rs_alloc,
3351 .free = rs_free,
3352 .alloc_sta = rs_alloc_sta,
3353 .free_sta = rs_free_sta,
3354 #ifdef CONFIG_MAC80211_DEBUGFS
3355 .add_sta_debugfs = rs_add_debugfs,
3356 .remove_sta_debugfs = rs_remove_debugfs,
3357 #endif
3360 int iwlagn_rate_control_register(void)
3362 return ieee80211_rate_control_register(&rs_ops);
3365 void iwlagn_rate_control_unregister(void)
3367 ieee80211_rate_control_unregister(&rs_ops);