tuntap: switch to use rtnl_dereference()
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / rtc / rtc-pcf2123.c
blob02b742afa761649b0737ab00da9cf69b8526feb8
1 /*
2 * An SPI driver for the Philips PCF2123 RTC
3 * Copyright 2009 Cyber Switching, Inc.
5 * Author: Chris Verges <chrisv@cyberswitching.com>
6 * Maintainers: http://www.cyberswitching.com
8 * based on the RS5C348 driver in this same directory.
10 * Thanks to Christian Pellegrin <chripell@fsfe.org> for
11 * the sysfs contributions to this driver.
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
17 * Please note that the CS is active high, so platform data
18 * should look something like:
20 * static struct spi_board_info ek_spi_devices[] = {
21 * ...
22 * {
23 * .modalias = "rtc-pcf2123",
24 * .chip_select = 1,
25 * .controller_data = (void *)AT91_PIN_PA10,
26 * .max_speed_hz = 1000 * 1000,
27 * .mode = SPI_CS_HIGH,
28 * .bus_num = 0,
29 * },
30 * ...
31 *};
35 #include <linux/bcd.h>
36 #include <linux/delay.h>
37 #include <linux/device.h>
38 #include <linux/errno.h>
39 #include <linux/init.h>
40 #include <linux/kernel.h>
41 #include <linux/string.h>
42 #include <linux/slab.h>
43 #include <linux/rtc.h>
44 #include <linux/spi/spi.h>
45 #include <linux/module.h>
46 #include <linux/sysfs.h>
48 #define DRV_VERSION "0.6"
50 #define PCF2123_REG_CTRL1 (0x00) /* Control Register 1 */
51 #define PCF2123_REG_CTRL2 (0x01) /* Control Register 2 */
52 #define PCF2123_REG_SC (0x02) /* datetime */
53 #define PCF2123_REG_MN (0x03)
54 #define PCF2123_REG_HR (0x04)
55 #define PCF2123_REG_DM (0x05)
56 #define PCF2123_REG_DW (0x06)
57 #define PCF2123_REG_MO (0x07)
58 #define PCF2123_REG_YR (0x08)
60 #define PCF2123_SUBADDR (1 << 4)
61 #define PCF2123_WRITE ((0 << 7) | PCF2123_SUBADDR)
62 #define PCF2123_READ ((1 << 7) | PCF2123_SUBADDR)
64 static struct spi_driver pcf2123_driver;
66 struct pcf2123_sysfs_reg {
67 struct device_attribute attr;
68 char name[2];
71 struct pcf2123_plat_data {
72 struct rtc_device *rtc;
73 struct pcf2123_sysfs_reg regs[16];
77 * Causes a 30 nanosecond delay to ensure that the PCF2123 chip select
78 * is released properly after an SPI write. This function should be
79 * called after EVERY read/write call over SPI.
81 static inline void pcf2123_delay_trec(void)
83 ndelay(30);
86 static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
87 char *buffer)
89 struct spi_device *spi = to_spi_device(dev);
90 struct pcf2123_sysfs_reg *r;
91 u8 txbuf[1], rxbuf[1];
92 unsigned long reg;
93 int ret;
95 r = container_of(attr, struct pcf2123_sysfs_reg, attr);
97 if (strict_strtoul(r->name, 16, &reg))
98 return -EINVAL;
100 txbuf[0] = PCF2123_READ | reg;
101 ret = spi_write_then_read(spi, txbuf, 1, rxbuf, 1);
102 if (ret < 0)
103 return -EIO;
104 pcf2123_delay_trec();
105 return sprintf(buffer, "0x%x\n", rxbuf[0]);
108 static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
109 const char *buffer, size_t count) {
110 struct spi_device *spi = to_spi_device(dev);
111 struct pcf2123_sysfs_reg *r;
112 u8 txbuf[2];
113 unsigned long reg;
114 unsigned long val;
116 int ret;
118 r = container_of(attr, struct pcf2123_sysfs_reg, attr);
120 if (strict_strtoul(r->name, 16, &reg)
121 || strict_strtoul(buffer, 10, &val))
122 return -EINVAL;
124 txbuf[0] = PCF2123_WRITE | reg;
125 txbuf[1] = val;
126 ret = spi_write(spi, txbuf, sizeof(txbuf));
127 if (ret < 0)
128 return -EIO;
129 pcf2123_delay_trec();
130 return count;
133 static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
135 struct spi_device *spi = to_spi_device(dev);
136 u8 txbuf[1], rxbuf[7];
137 int ret;
139 txbuf[0] = PCF2123_READ | PCF2123_REG_SC;
140 ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
141 rxbuf, sizeof(rxbuf));
142 if (ret < 0)
143 return ret;
144 pcf2123_delay_trec();
146 tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F);
147 tm->tm_min = bcd2bin(rxbuf[1] & 0x7F);
148 tm->tm_hour = bcd2bin(rxbuf[2] & 0x3F); /* rtc hr 0-23 */
149 tm->tm_mday = bcd2bin(rxbuf[3] & 0x3F);
150 tm->tm_wday = rxbuf[4] & 0x07;
151 tm->tm_mon = bcd2bin(rxbuf[5] & 0x1F) - 1; /* rtc mn 1-12 */
152 tm->tm_year = bcd2bin(rxbuf[6]);
153 if (tm->tm_year < 70)
154 tm->tm_year += 100; /* assume we are in 1970...2069 */
156 dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
157 "mday=%d, mon=%d, year=%d, wday=%d\n",
158 __func__,
159 tm->tm_sec, tm->tm_min, tm->tm_hour,
160 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
162 /* the clock can give out invalid datetime, but we cannot return
163 * -EINVAL otherwise hwclock will refuse to set the time on bootup.
165 if (rtc_valid_tm(tm) < 0)
166 dev_err(dev, "retrieved date/time is not valid.\n");
168 return 0;
171 static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
173 struct spi_device *spi = to_spi_device(dev);
174 u8 txbuf[8];
175 int ret;
177 dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
178 "mday=%d, mon=%d, year=%d, wday=%d\n",
179 __func__,
180 tm->tm_sec, tm->tm_min, tm->tm_hour,
181 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
183 /* Stop the counter first */
184 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
185 txbuf[1] = 0x20;
186 ret = spi_write(spi, txbuf, 2);
187 if (ret < 0)
188 return ret;
189 pcf2123_delay_trec();
191 /* Set the new time */
192 txbuf[0] = PCF2123_WRITE | PCF2123_REG_SC;
193 txbuf[1] = bin2bcd(tm->tm_sec & 0x7F);
194 txbuf[2] = bin2bcd(tm->tm_min & 0x7F);
195 txbuf[3] = bin2bcd(tm->tm_hour & 0x3F);
196 txbuf[4] = bin2bcd(tm->tm_mday & 0x3F);
197 txbuf[5] = tm->tm_wday & 0x07;
198 txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
199 txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100);
201 ret = spi_write(spi, txbuf, sizeof(txbuf));
202 if (ret < 0)
203 return ret;
204 pcf2123_delay_trec();
206 /* Start the counter */
207 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
208 txbuf[1] = 0x00;
209 ret = spi_write(spi, txbuf, 2);
210 if (ret < 0)
211 return ret;
212 pcf2123_delay_trec();
214 return 0;
217 static const struct rtc_class_ops pcf2123_rtc_ops = {
218 .read_time = pcf2123_rtc_read_time,
219 .set_time = pcf2123_rtc_set_time,
222 static int pcf2123_probe(struct spi_device *spi)
224 struct rtc_device *rtc;
225 struct pcf2123_plat_data *pdata;
226 u8 txbuf[2], rxbuf[2];
227 int ret, i;
229 pdata = kzalloc(sizeof(struct pcf2123_plat_data), GFP_KERNEL);
230 if (!pdata)
231 return -ENOMEM;
232 spi->dev.platform_data = pdata;
234 /* Send a software reset command */
235 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
236 txbuf[1] = 0x58;
237 dev_dbg(&spi->dev, "resetting RTC (0x%02X 0x%02X)\n",
238 txbuf[0], txbuf[1]);
239 ret = spi_write(spi, txbuf, 2 * sizeof(u8));
240 if (ret < 0)
241 goto kfree_exit;
242 pcf2123_delay_trec();
244 /* Stop the counter */
245 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
246 txbuf[1] = 0x20;
247 dev_dbg(&spi->dev, "stopping RTC (0x%02X 0x%02X)\n",
248 txbuf[0], txbuf[1]);
249 ret = spi_write(spi, txbuf, 2 * sizeof(u8));
250 if (ret < 0)
251 goto kfree_exit;
252 pcf2123_delay_trec();
254 /* See if the counter was actually stopped */
255 txbuf[0] = PCF2123_READ | PCF2123_REG_CTRL1;
256 dev_dbg(&spi->dev, "checking for presence of RTC (0x%02X)\n",
257 txbuf[0]);
258 ret = spi_write_then_read(spi, txbuf, 1 * sizeof(u8),
259 rxbuf, 2 * sizeof(u8));
260 dev_dbg(&spi->dev, "received data from RTC (0x%02X 0x%02X)\n",
261 rxbuf[0], rxbuf[1]);
262 if (ret < 0)
263 goto kfree_exit;
264 pcf2123_delay_trec();
266 if (!(rxbuf[0] & 0x20)) {
267 dev_err(&spi->dev, "chip not found\n");
268 goto kfree_exit;
271 dev_info(&spi->dev, "chip found, driver version " DRV_VERSION "\n");
272 dev_info(&spi->dev, "spiclk %u KHz.\n",
273 (spi->max_speed_hz + 500) / 1000);
275 /* Start the counter */
276 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
277 txbuf[1] = 0x00;
278 ret = spi_write(spi, txbuf, sizeof(txbuf));
279 if (ret < 0)
280 goto kfree_exit;
281 pcf2123_delay_trec();
283 /* Finalize the initialization */
284 rtc = rtc_device_register(pcf2123_driver.driver.name, &spi->dev,
285 &pcf2123_rtc_ops, THIS_MODULE);
287 if (IS_ERR(rtc)) {
288 dev_err(&spi->dev, "failed to register.\n");
289 ret = PTR_ERR(rtc);
290 goto kfree_exit;
293 pdata->rtc = rtc;
295 for (i = 0; i < 16; i++) {
296 sysfs_attr_init(&pdata->regs[i].attr.attr);
297 sprintf(pdata->regs[i].name, "%1x", i);
298 pdata->regs[i].attr.attr.mode = S_IRUGO | S_IWUSR;
299 pdata->regs[i].attr.attr.name = pdata->regs[i].name;
300 pdata->regs[i].attr.show = pcf2123_show;
301 pdata->regs[i].attr.store = pcf2123_store;
302 ret = device_create_file(&spi->dev, &pdata->regs[i].attr);
303 if (ret) {
304 dev_err(&spi->dev, "Unable to create sysfs %s\n",
305 pdata->regs[i].name);
306 goto sysfs_exit;
310 return 0;
312 sysfs_exit:
313 for (i--; i >= 0; i--)
314 device_remove_file(&spi->dev, &pdata->regs[i].attr);
316 kfree_exit:
317 kfree(pdata);
318 spi->dev.platform_data = NULL;
319 return ret;
322 static int pcf2123_remove(struct spi_device *spi)
324 struct pcf2123_plat_data *pdata = spi->dev.platform_data;
325 int i;
327 if (pdata) {
328 struct rtc_device *rtc = pdata->rtc;
330 if (rtc)
331 rtc_device_unregister(rtc);
332 for (i = 0; i < 16; i++)
333 if (pdata->regs[i].name[0])
334 device_remove_file(&spi->dev,
335 &pdata->regs[i].attr);
336 kfree(pdata);
339 return 0;
342 static struct spi_driver pcf2123_driver = {
343 .driver = {
344 .name = "rtc-pcf2123",
345 .owner = THIS_MODULE,
347 .probe = pcf2123_probe,
348 .remove = pcf2123_remove,
351 module_spi_driver(pcf2123_driver);
353 MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>");
354 MODULE_DESCRIPTION("NXP PCF2123 RTC driver");
355 MODULE_LICENSE("GPL");
356 MODULE_VERSION(DRV_VERSION);