?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
tuner_xc2028: Allow selection of the frequency adjustment code for XC3028
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / media / video / cx23885 / cx23885-dvb.c
blobc204ddb10575540348720e549ff976b57694266a
1 /*
2 * Driver for the Conexant CX23885 PCIe bridge
3 *
4 * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 *
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21
22 #include <linux/module.h>
23 #include <linux/init.h>
24 #include <linux/device.h>
25 #include <linux/fs.h>
26 #include <linux/kthread.h>
27 #include <linux/file.h>
28 #include <linux/suspend.h>
29
30 #include "cx23885.h"
31 #include <media/v4l2-common.h>
32
33 #include "dvb_ca_en50221.h"
34 #include "s5h1409.h"
35 #include "s5h1411.h"
36 #include "mt2131.h"
37 #include "tda8290.h"
38 #include "tda18271.h"
39 #include "lgdt330x.h"
40 #include "xc5000.h"
41 #include "tda10048.h"
42 #include "tuner-xc2028.h"
43 #include "tuner-simple.h"
44 #include "dib7000p.h"
45 #include "dibx000_common.h"
46 #include "zl10353.h"
47 #include "stv0900.h"
48 #include "stv0900_reg.h"
49 #include "stv6110.h"
50 #include "lnbh24.h"
51 #include "cx24116.h"
52 #include "cimax2.h"
53 #include "lgs8gxx.h"
54 #include "netup-eeprom.h"
55 #include "netup-init.h"
56 #include "lgdt3305.h"
57
58 static unsigned int debug;
59
60 #define dprintk(level, fmt, arg...)\
61 do { if (debug >= level)\
62 printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
63 } while (0)
64
65 /* ------------------------------------------------------------------ */
66
67 static unsigned int alt_tuner;
68 module_param(alt_tuner, int, 0644);
69 MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
70
71 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
72
73 /* ------------------------------------------------------------------ */
74
75 static int dvb_buf_setup(struct videobuf_queue *q,
76 unsigned int *count, unsigned int *size)
77 {
78 struct cx23885_tsport *port = q->priv_data;
79
80 port->ts_packet_size = 188 * 4;
81 port->ts_packet_count = 32;
82
83 *size = port->ts_packet_size * port->ts_packet_count;
84 *count = 32;
85 return 0;
86 }
87
88 static int dvb_buf_prepare(struct videobuf_queue *q,
89 struct videobuf_buffer *vb, enum v4l2_field field)
90 {
91 struct cx23885_tsport *port = q->priv_data;
92 return cx23885_buf_prepare(q, port, (struct cx23885_buffer *)vb, field);
93 }
94
95 static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
96 {
97 struct cx23885_tsport *port = q->priv_data;
98 cx23885_buf_queue(port, (struct cx23885_buffer *)vb);
99 }
100
101 static void dvb_buf_release(struct videobuf_queue *q,
102 struct videobuf_buffer *vb)
103 {
104 cx23885_free_buffer(q, (struct cx23885_buffer *)vb);
105 }
106
107 static struct videobuf_queue_ops dvb_qops = {
108 .buf_setup = dvb_buf_setup,
109 .buf_prepare = dvb_buf_prepare,
110 .buf_queue = dvb_buf_queue,
111 .buf_release = dvb_buf_release,
112 };
113
114 static struct s5h1409_config hauppauge_generic_config = {
115 .demod_address = 0x32 >> 1,
116 .output_mode = S5H1409_SERIAL_OUTPUT,
117 .gpio = S5H1409_GPIO_ON,
118 .qam_if = 44000,
119 .inversion = S5H1409_INVERSION_OFF,
120 .status_mode = S5H1409_DEMODLOCKING,
121 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
122 };
123
124 static struct tda10048_config hauppauge_hvr1200_config = {
125 .demod_address = 0x10 >> 1,
126 .output_mode = TDA10048_SERIAL_OUTPUT,
127 .fwbulkwritelen = TDA10048_BULKWRITE_200,
128 .inversion = TDA10048_INVERSION_ON,
129 .dtv6_if_freq_khz = TDA10048_IF_3300,
130 .dtv7_if_freq_khz = TDA10048_IF_3800,
131 .dtv8_if_freq_khz = TDA10048_IF_4300,
132 .clk_freq_khz = TDA10048_CLK_16000,
133 };
134
135 static struct tda10048_config hauppauge_hvr1210_config = {
136 .demod_address = 0x10 >> 1,
137 .output_mode = TDA10048_SERIAL_OUTPUT,
138 .fwbulkwritelen = TDA10048_BULKWRITE_200,
139 .inversion = TDA10048_INVERSION_ON,
140 .dtv6_if_freq_khz = TDA10048_IF_3300,
141 .dtv7_if_freq_khz = TDA10048_IF_3500,
142 .dtv8_if_freq_khz = TDA10048_IF_4000,
143 .clk_freq_khz = TDA10048_CLK_16000,
144 };
145
146 static struct s5h1409_config hauppauge_ezqam_config = {
147 .demod_address = 0x32 >> 1,
148 .output_mode = S5H1409_SERIAL_OUTPUT,
149 .gpio = S5H1409_GPIO_OFF,
150 .qam_if = 4000,
151 .inversion = S5H1409_INVERSION_ON,
152 .status_mode = S5H1409_DEMODLOCKING,
153 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
154 };
155
156 static struct s5h1409_config hauppauge_hvr1800lp_config = {
157 .demod_address = 0x32 >> 1,
158 .output_mode = S5H1409_SERIAL_OUTPUT,
159 .gpio = S5H1409_GPIO_OFF,
160 .qam_if = 44000,
161 .inversion = S5H1409_INVERSION_OFF,
162 .status_mode = S5H1409_DEMODLOCKING,
163 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
164 };
165
166 static struct s5h1409_config hauppauge_hvr1500_config = {
167 .demod_address = 0x32 >> 1,
168 .output_mode = S5H1409_SERIAL_OUTPUT,
169 .gpio = S5H1409_GPIO_OFF,
170 .inversion = S5H1409_INVERSION_OFF,
171 .status_mode = S5H1409_DEMODLOCKING,
172 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
173 };
174
175 static struct mt2131_config hauppauge_generic_tunerconfig = {
176 0x61
177 };
178
179 static struct lgdt330x_config fusionhdtv_5_express = {
180 .demod_address = 0x0e,
181 .demod_chip = LGDT3303,
182 .serial_mpeg = 0x40,
183 };
184
185 static struct s5h1409_config hauppauge_hvr1500q_config = {
186 .demod_address = 0x32 >> 1,
187 .output_mode = S5H1409_SERIAL_OUTPUT,
188 .gpio = S5H1409_GPIO_ON,
189 .qam_if = 44000,
190 .inversion = S5H1409_INVERSION_OFF,
191 .status_mode = S5H1409_DEMODLOCKING,
192 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
193 };
194
195 static struct s5h1409_config dvico_s5h1409_config = {
196 .demod_address = 0x32 >> 1,
197 .output_mode = S5H1409_SERIAL_OUTPUT,
198 .gpio = S5H1409_GPIO_ON,
199 .qam_if = 44000,
200 .inversion = S5H1409_INVERSION_OFF,
201 .status_mode = S5H1409_DEMODLOCKING,
202 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
203 };
204
205 static struct s5h1411_config dvico_s5h1411_config = {
206 .output_mode = S5H1411_SERIAL_OUTPUT,
207 .gpio = S5H1411_GPIO_ON,
208 .qam_if = S5H1411_IF_44000,
209 .vsb_if = S5H1411_IF_44000,
210 .inversion = S5H1411_INVERSION_OFF,
211 .status_mode = S5H1411_DEMODLOCKING,
212 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
213 };
214
215 static struct s5h1411_config hcw_s5h1411_config = {
216 .output_mode = S5H1411_SERIAL_OUTPUT,
217 .gpio = S5H1411_GPIO_OFF,
218 .vsb_if = S5H1411_IF_44000,
219 .qam_if = S5H1411_IF_4000,
220 .inversion = S5H1411_INVERSION_ON,
221 .status_mode = S5H1411_DEMODLOCKING,
222 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
223 };
224
225 static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
226 .i2c_address = 0x61,
227 .if_khz = 5380,
228 };
229
230 static struct xc5000_config dvico_xc5000_tunerconfig = {
231 .i2c_address = 0x64,
232 .if_khz = 5380,
233 };
234
235 static struct tda829x_config tda829x_no_probe = {
236 .probe_tuner = TDA829X_DONT_PROBE,
237 };
238
239 static struct tda18271_std_map hauppauge_tda18271_std_map = {
240 .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3,
241 .if_lvl = 6, .rfagc_top = 0x37 },
242 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
243 .if_lvl = 6, .rfagc_top = 0x37 },
244 };
245
246 static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
247 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
248 .if_lvl = 1, .rfagc_top = 0x37, },
249 .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
250 .if_lvl = 1, .rfagc_top = 0x37, },
251 .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
252 .if_lvl = 1, .rfagc_top = 0x37, },
253 };
254
255 static struct tda18271_config hauppauge_tda18271_config = {
256 .std_map = &hauppauge_tda18271_std_map,
257 .gate = TDA18271_GATE_ANALOG,
258 .output_opt = TDA18271_OUTPUT_LT_OFF,
259 };
260
261 static struct tda18271_config hauppauge_hvr1200_tuner_config = {
262 .std_map = &hauppauge_hvr1200_tda18271_std_map,
263 .gate = TDA18271_GATE_ANALOG,
264 .output_opt = TDA18271_OUTPUT_LT_OFF,
265 };
266
267 static struct tda18271_config hauppauge_hvr1210_tuner_config = {
268 .gate = TDA18271_GATE_DIGITAL,
269 .output_opt = TDA18271_OUTPUT_LT_OFF,
270 };
271
272 static struct tda18271_std_map hauppauge_hvr127x_std_map = {
273 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
274 .if_lvl = 1, .rfagc_top = 0x58 },
275 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
276 .if_lvl = 1, .rfagc_top = 0x58 },
277 };
278
279 static struct tda18271_config hauppauge_hvr127x_config = {
280 .std_map = &hauppauge_hvr127x_std_map,
281 .output_opt = TDA18271_OUTPUT_LT_OFF,
282 };
283
284 static struct lgdt3305_config hauppauge_lgdt3305_config = {
285 .i2c_addr = 0x0e,
286 .mpeg_mode = LGDT3305_MPEG_SERIAL,
287 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
288 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
289 .deny_i2c_rptr = 1,
290 .spectral_inversion = 1,
291 .qam_if_khz = 4000,
292 .vsb_if_khz = 3250,
293 };
294
295 static struct dibx000_agc_config xc3028_agc_config = {
296 BAND_VHF | BAND_UHF, /* band_caps */
297
298 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
299 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
300 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
301 * P_agc_nb_est=2, P_agc_write=0
302 */
303 (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
304 (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
305
306 712, /* inv_gain */
307 21, /* time_stabiliz */
308
309 0, /* alpha_level */
310 118, /* thlock */
311
312 0, /* wbd_inv */
313 2867, /* wbd_ref */
314 0, /* wbd_sel */
315 2, /* wbd_alpha */
316
317 0, /* agc1_max */
318 0, /* agc1_min */
319 39718, /* agc2_max */
320 9930, /* agc2_min */
321 0, /* agc1_pt1 */
322 0, /* agc1_pt2 */
323 0, /* agc1_pt3 */
324 0, /* agc1_slope1 */
325 0, /* agc1_slope2 */
326 0, /* agc2_pt1 */
327 128, /* agc2_pt2 */
328 29, /* agc2_slope1 */
329 29, /* agc2_slope2 */
330
331 17, /* alpha_mant */
332 27, /* alpha_exp */
333 23, /* beta_mant */
334 51, /* beta_exp */
335
336 1, /* perform_agc_softsplit */
337 };
338
339 /* PLL Configuration for COFDM BW_MHz = 8.000000
340 * With external clock = 30.000000 */
341 static struct dibx000_bandwidth_config xc3028_bw_config = {
342 60000, /* internal */
343 30000, /* sampling */
344 1, /* pll_cfg: prediv */
345 8, /* pll_cfg: ratio */
346 3, /* pll_cfg: range */
347 1, /* pll_cfg: reset */
348 0, /* pll_cfg: bypass */
349 0, /* misc: refdiv */
350 0, /* misc: bypclk_div */
351 1, /* misc: IO_CLK_en_core */
352 1, /* misc: ADClkSrc */
353 0, /* misc: modulo */
354 (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
355 (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
356 20452225, /* timf */
357 30000000 /* xtal_hz */
358 };
359
360 static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
361 .output_mpeg2_in_188_bytes = 1,
362 .hostbus_diversity = 1,
363 .tuner_is_baseband = 0,
364 .update_lna = NULL,
365
366 .agc_config_count = 1,
367 .agc = &xc3028_agc_config,
368 .bw = &xc3028_bw_config,
369
370 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
371 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
372 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
373
374 .pwm_freq_div = 0,
375 .agc_control = NULL,
376 .spur_protect = 0,
377
378 .output_mode = OUTMODE_MPEG2_SERIAL,
379 };
380
381 static struct zl10353_config dvico_fusionhdtv_xc3028 = {
382 .demod_address = 0x0f,
383 .if2 = 45600,
384 .no_tuner = 1,
385 .disable_i2c_gate_ctrl = 1,
386 };
387
388 static struct stv0900_reg stv0900_ts_regs[] = {
389 { R0900_TSGENERAL, 0x00 },
390 { R0900_P1_TSSPEED, 0x40 },
391 { R0900_P2_TSSPEED, 0x40 },
392 { R0900_P1_TSCFGM, 0xc0 },
393 { R0900_P2_TSCFGM, 0xc0 },
394 { R0900_P1_TSCFGH, 0xe0 },
395 { R0900_P2_TSCFGH, 0xe0 },
396 { R0900_P1_TSCFGL, 0x20 },
397 { R0900_P2_TSCFGL, 0x20 },
398 { 0xffff, 0xff }, /* terminate */
399 };
400
401 static struct stv0900_config netup_stv0900_config = {
402 .demod_address = 0x68,
403 .xtal = 8000000,
404 .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
405 .diseqc_mode = 2,/* 2/3 PWM */
406 .ts_config_regs = stv0900_ts_regs,
407 .tun1_maddress = 0,/* 0x60 */
408 .tun2_maddress = 3,/* 0x63 */
409 .tun1_adc = 1,/* 1 Vpp */
410 .tun2_adc = 1,/* 1 Vpp */
411 };
412
413 static struct stv6110_config netup_stv6110_tunerconfig_a = {
414 .i2c_address = 0x60,
415 .mclk = 16000000,
416 .clk_div = 1,
417 };
418
419 static struct stv6110_config netup_stv6110_tunerconfig_b = {
420 .i2c_address = 0x63,
421 .mclk = 16000000,
422 .clk_div = 1,
423 };
424
425 static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
426 {
427 struct cx23885_tsport *port = fe->dvb->priv;
428 struct cx23885_dev *dev = port->dev;
429
430 if (voltage == SEC_VOLTAGE_18)
431 cx_write(MC417_RWD, 0x00001e00);/* GPIO-13 high */
432 else if (voltage == SEC_VOLTAGE_13)
433 cx_write(MC417_RWD, 0x00001a00);/* GPIO-13 low */
434 else
435 cx_write(MC417_RWD, 0x00001800);/* GPIO-12 low */
436 return 0;
437 }
438
439 static struct cx24116_config tbs_cx24116_config = {
440 .demod_address = 0x05,
441 };
442
443 static struct cx24116_config tevii_cx24116_config = {
444 .demod_address = 0x55,
445 };
446
447 static struct cx24116_config dvbworld_cx24116_config = {
448 .demod_address = 0x05,
449 };
450
451 static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
452 .prod = LGS8GXX_PROD_LGS8GL5,
453 .demod_address = 0x19,
454 .serial_ts = 0,
455 .ts_clk_pol = 1,
456 .ts_clk_gated = 1,
457 .if_clk_freq = 30400, /* 30.4 MHz */
458 .if_freq = 5380, /* 5.38 MHz */
459 .if_neg_center = 1,
460 .ext_adc = 0,
461 .adc_signed = 0,
462 .if_neg_edge = 0,
463 };
464
465 static struct xc5000_config mygica_x8506_xc5000_config = {
466 .i2c_address = 0x61,
467 .if_khz = 5380,
468 };
469
470 static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
471 struct dvb_frontend_parameters *param)
472 {
473 struct cx23885_tsport *port = fe->dvb->priv;
474 struct cx23885_dev *dev = port->dev;
475
476 switch (dev->board) {
477 case CX23885_BOARD_HAUPPAUGE_HVR1275:
478 switch (param->u.vsb.modulation) {
479 case VSB_8:
480 cx23885_gpio_clear(dev, GPIO_5);
481 break;
482 case QAM_64:
483 case QAM_256:
484 default:
485 cx23885_gpio_set(dev, GPIO_5);
486 break;
487 }
488 break;
489 }
490 return (port->set_frontend_save) ?
491 port->set_frontend_save(fe, param) : -ENODEV;
492 }
493
494 static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
495 .prod = LGS8GXX_PROD_LGS8G75,
496 .demod_address = 0x19,
497 .serial_ts = 0,
498 .ts_clk_pol = 1,
499 .ts_clk_gated = 1,
500 .if_clk_freq = 30400, /* 30.4 MHz */
501 .if_freq = 6500, /* 6.50 MHz */
502 .if_neg_center = 1,
503 .ext_adc = 0,
504 .adc_signed = 1,
505 .adc_vpp = 2, /* 1.6 Vpp */
506 .if_neg_edge = 1,
507 };
508
509 static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
510 .i2c_address = 0x61,
511 .if_khz = 6500,
512 };
513
514 static int dvb_register(struct cx23885_tsport *port)
515 {
516 struct cx23885_dev *dev = port->dev;
517 struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
518 struct videobuf_dvb_frontend *fe0;
519 int ret;
520
521 /* Get the first frontend */
522 fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
523 if (!fe0)
524 return -EINVAL;
525
526 /* init struct videobuf_dvb */
527 fe0->dvb.name = dev->name;
528
529 /* init frontend */
530 switch (dev->board) {
531 case CX23885_BOARD_HAUPPAUGE_HVR1250:
532 i2c_bus = &dev->i2c_bus[0];
533 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
534 &hauppauge_generic_config,
535 &i2c_bus->i2c_adap);
536 if (fe0->dvb.frontend != NULL) {
537 dvb_attach(mt2131_attach, fe0->dvb.frontend,
538 &i2c_bus->i2c_adap,
539 &hauppauge_generic_tunerconfig, 0);
540 }
541 break;
542 case CX23885_BOARD_HAUPPAUGE_HVR1270:
543 case CX23885_BOARD_HAUPPAUGE_HVR1275:
544 i2c_bus = &dev->i2c_bus[0];
545 fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
546 &hauppauge_lgdt3305_config,
547 &i2c_bus->i2c_adap);
548 if (fe0->dvb.frontend != NULL) {
549 dvb_attach(tda18271_attach, fe0->dvb.frontend,
550 0x60, &dev->i2c_bus[1].i2c_adap,
551 &hauppauge_hvr127x_config);
552 }
553
554 /* FIXME: temporary hack */
555 /* define bridge override to set_frontend */
556 port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend;
557 fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend;
558
559 break;
560 case CX23885_BOARD_HAUPPAUGE_HVR1255:
561 i2c_bus = &dev->i2c_bus[0];
562 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
563 &hcw_s5h1411_config,
564 &i2c_bus->i2c_adap);
565 if (fe0->dvb.frontend != NULL) {
566 dvb_attach(tda18271_attach, fe0->dvb.frontend,
567 0x60, &dev->i2c_bus[1].i2c_adap,
568 &hauppauge_tda18271_config);
569 }
570 break;
571 case CX23885_BOARD_HAUPPAUGE_HVR1800:
572 i2c_bus = &dev->i2c_bus[0];
573 switch (alt_tuner) {
574 case 1:
575 fe0->dvb.frontend =
576 dvb_attach(s5h1409_attach,
577 &hauppauge_ezqam_config,
578 &i2c_bus->i2c_adap);
579 if (fe0->dvb.frontend != NULL) {
580 dvb_attach(tda829x_attach, fe0->dvb.frontend,
581 &dev->i2c_bus[1].i2c_adap, 0x42,
582 &tda829x_no_probe);
583 dvb_attach(tda18271_attach, fe0->dvb.frontend,
584 0x60, &dev->i2c_bus[1].i2c_adap,
585 &hauppauge_tda18271_config);
586 }
587 break;
588 case 0:
589 default:
590 fe0->dvb.frontend =
591 dvb_attach(s5h1409_attach,
592 &hauppauge_generic_config,
593 &i2c_bus->i2c_adap);
594 if (fe0->dvb.frontend != NULL)
595 dvb_attach(mt2131_attach, fe0->dvb.frontend,
596 &i2c_bus->i2c_adap,
597 &hauppauge_generic_tunerconfig, 0);
598 break;
599 }
600 break;
601 case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
602 i2c_bus = &dev->i2c_bus[0];
603 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
604 &hauppauge_hvr1800lp_config,
605 &i2c_bus->i2c_adap);
606 if (fe0->dvb.frontend != NULL) {
607 dvb_attach(mt2131_attach, fe0->dvb.frontend,
608 &i2c_bus->i2c_adap,
609 &hauppauge_generic_tunerconfig, 0);
610 }
611 break;
612 case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
613 i2c_bus = &dev->i2c_bus[0];
614 fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
615 &fusionhdtv_5_express,
616 &i2c_bus->i2c_adap);
617 if (fe0->dvb.frontend != NULL) {
618 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
619 &i2c_bus->i2c_adap, 0x61,
620 TUNER_LG_TDVS_H06XF);
621 }
622 break;
623 case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
624 i2c_bus = &dev->i2c_bus[1];
625 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
626 &hauppauge_hvr1500q_config,
627 &dev->i2c_bus[0].i2c_adap);
628 if (fe0->dvb.frontend != NULL)
629 dvb_attach(xc5000_attach, fe0->dvb.frontend,
630 &i2c_bus->i2c_adap,
631 &hauppauge_hvr1500q_tunerconfig);
632 break;
633 case CX23885_BOARD_HAUPPAUGE_HVR1500:
634 i2c_bus = &dev->i2c_bus[1];
635 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
636 &hauppauge_hvr1500_config,
637 &dev->i2c_bus[0].i2c_adap);
638 if (fe0->dvb.frontend != NULL) {
639 struct dvb_frontend *fe;
640 struct xc2028_config cfg = {
641 .i2c_adap = &i2c_bus->i2c_adap,
642 .i2c_addr = 0x61,
643 };
644 static struct xc2028_ctrl ctl = {
645 .fname = XC2028_DEFAULT_FIRMWARE,
646 .max_len = 64,
647 .demod = XC3028_FE_OREN538,
648 };
649
650 fe = dvb_attach(xc2028_attach,
651 fe0->dvb.frontend, &cfg);
652 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
653 fe->ops.tuner_ops.set_config(fe, &ctl);
654 }
655 break;
656 case CX23885_BOARD_HAUPPAUGE_HVR1200:
657 case CX23885_BOARD_HAUPPAUGE_HVR1700:
658 i2c_bus = &dev->i2c_bus[0];
659 fe0->dvb.frontend = dvb_attach(tda10048_attach,
660 &hauppauge_hvr1200_config,
661 &i2c_bus->i2c_adap);
662 if (fe0->dvb.frontend != NULL) {
663 dvb_attach(tda829x_attach, fe0->dvb.frontend,
664 &dev->i2c_bus[1].i2c_adap, 0x42,
665 &tda829x_no_probe);
666 dvb_attach(tda18271_attach, fe0->dvb.frontend,
667 0x60, &dev->i2c_bus[1].i2c_adap,
668 &hauppauge_hvr1200_tuner_config);
669 }
670 break;
671 case CX23885_BOARD_HAUPPAUGE_HVR1210:
672 i2c_bus = &dev->i2c_bus[0];
673 fe0->dvb.frontend = dvb_attach(tda10048_attach,
674 &hauppauge_hvr1210_config,
675 &i2c_bus->i2c_adap);
676 if (fe0->dvb.frontend != NULL) {
677 dvb_attach(tda18271_attach, fe0->dvb.frontend,
678 0x60, &dev->i2c_bus[1].i2c_adap,
679 &hauppauge_hvr1210_tuner_config);
680 }
681 break;
682 case CX23885_BOARD_HAUPPAUGE_HVR1400:
683 i2c_bus = &dev->i2c_bus[0];
684 fe0->dvb.frontend = dvb_attach(dib7000p_attach,
685 &i2c_bus->i2c_adap,
686 0x12, &hauppauge_hvr1400_dib7000_config);
687 if (fe0->dvb.frontend != NULL) {
688 struct dvb_frontend *fe;
689 struct xc2028_config cfg = {
690 .i2c_adap = &dev->i2c_bus[1].i2c_adap,
691 .i2c_addr = 0x64,
692 };
693 static struct xc2028_ctrl ctl = {
694 .fname = XC3028L_DEFAULT_FIRMWARE,
695 .max_len = 64,
696 .demod = XC3028_FE_DIBCOM52,
697 /* This is true for all demods with
698 v36 firmware? */
699 .type = XC2028_D2633,
700 };
701
702 fe = dvb_attach(xc2028_attach,
703 fe0->dvb.frontend, &cfg);
704 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
705 fe->ops.tuner_ops.set_config(fe, &ctl);
706 }
707 break;
708 case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
709 i2c_bus = &dev->i2c_bus[port->nr - 1];
710
711 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
712 &dvico_s5h1409_config,
713 &i2c_bus->i2c_adap);
714 if (fe0->dvb.frontend == NULL)
715 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
716 &dvico_s5h1411_config,
717 &i2c_bus->i2c_adap);
718 if (fe0->dvb.frontend != NULL)
719 dvb_attach(xc5000_attach, fe0->dvb.frontend,
720 &i2c_bus->i2c_adap,
721 &dvico_xc5000_tunerconfig);
722 break;
723 case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
724 i2c_bus = &dev->i2c_bus[port->nr - 1];
725
726 fe0->dvb.frontend = dvb_attach(zl10353_attach,
727 &dvico_fusionhdtv_xc3028,
728 &i2c_bus->i2c_adap);
729 if (fe0->dvb.frontend != NULL) {
730 struct dvb_frontend *fe;
731 struct xc2028_config cfg = {
732 .i2c_adap = &i2c_bus->i2c_adap,
733 .i2c_addr = 0x61,
734 };
735 static struct xc2028_ctrl ctl = {
736 .fname = XC2028_DEFAULT_FIRMWARE,
737 .max_len = 64,
738 .demod = XC3028_FE_ZARLINK456,
739 };
740
741 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
742 &cfg);
743 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
744 fe->ops.tuner_ops.set_config(fe, &ctl);
745 }
746 break;
747 }
748 case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
749 case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
750 case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
751 i2c_bus = &dev->i2c_bus[0];
752
753 fe0->dvb.frontend = dvb_attach(zl10353_attach,
754 &dvico_fusionhdtv_xc3028,
755 &i2c_bus->i2c_adap);
756 if (fe0->dvb.frontend != NULL) {
757 struct dvb_frontend *fe;
758 struct xc2028_config cfg = {
759 .i2c_adap = &dev->i2c_bus[1].i2c_adap,
760 .i2c_addr = 0x61,
761 };
762 static struct xc2028_ctrl ctl = {
763 .fname = XC2028_DEFAULT_FIRMWARE,
764 .max_len = 64,
765 .demod = XC3028_FE_ZARLINK456,
766 };
767
768 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
769 &cfg);
770 if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
771 fe->ops.tuner_ops.set_config(fe, &ctl);
772 }
773 break;
774 case CX23885_BOARD_TBS_6920:
775 i2c_bus = &dev->i2c_bus[0];
776
777 fe0->dvb.frontend = dvb_attach(cx24116_attach,
778 &tbs_cx24116_config,
779 &i2c_bus->i2c_adap);
780 if (fe0->dvb.frontend != NULL)
781 fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
782
783 break;
784 case CX23885_BOARD_TEVII_S470:
785 i2c_bus = &dev->i2c_bus[1];
786
787 fe0->dvb.frontend = dvb_attach(cx24116_attach,
788 &tevii_cx24116_config,
789 &i2c_bus->i2c_adap);
790 if (fe0->dvb.frontend != NULL)
791 fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
792
793 break;
794 case CX23885_BOARD_DVBWORLD_2005:
795 i2c_bus = &dev->i2c_bus[1];
796
797 fe0->dvb.frontend = dvb_attach(cx24116_attach,
798 &dvbworld_cx24116_config,
799 &i2c_bus->i2c_adap);
800 break;
801 case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
802 i2c_bus = &dev->i2c_bus[0];
803 switch (port->nr) {
804 /* port B */
805 case 1:
806 fe0->dvb.frontend = dvb_attach(stv0900_attach,
807 &netup_stv0900_config,
808 &i2c_bus->i2c_adap, 0);
809 if (fe0->dvb.frontend != NULL) {
810 if (dvb_attach(stv6110_attach,
811 fe0->dvb.frontend,
812 &netup_stv6110_tunerconfig_a,
813 &i2c_bus->i2c_adap)) {
814 if (!dvb_attach(lnbh24_attach,
815 fe0->dvb.frontend,
816 &i2c_bus->i2c_adap,
817 LNBH24_PCL,
818 LNBH24_TTX, 0x09))
819 printk(KERN_ERR
820 "No LNBH24 found!\n");
821
822 }
823 }
824 break;
825 /* port C */
826 case 2:
827 fe0->dvb.frontend = dvb_attach(stv0900_attach,
828 &netup_stv0900_config,
829 &i2c_bus->i2c_adap, 1);
830 if (fe0->dvb.frontend != NULL) {
831 if (dvb_attach(stv6110_attach,
832 fe0->dvb.frontend,
833 &netup_stv6110_tunerconfig_b,
834 &i2c_bus->i2c_adap)) {
835 if (!dvb_attach(lnbh24_attach,
836 fe0->dvb.frontend,
837 &i2c_bus->i2c_adap,
838 LNBH24_PCL,
839 LNBH24_TTX, 0x0a))
840 printk(KERN_ERR
841 "No LNBH24 found!\n");
842
843 }
844 }
845 break;
846 }
847 break;
848 case CX23885_BOARD_MYGICA_X8506:
849 i2c_bus = &dev->i2c_bus[0];
850 i2c_bus2 = &dev->i2c_bus[1];
851 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
852 &mygica_x8506_lgs8gl5_config,
853 &i2c_bus->i2c_adap);
854 if (fe0->dvb.frontend != NULL) {
855 dvb_attach(xc5000_attach,
856 fe0->dvb.frontend,
857 &i2c_bus2->i2c_adap,
858 &mygica_x8506_xc5000_config);
859 }
860 break;
861 case CX23885_BOARD_MAGICPRO_PROHDTVE2:
862 i2c_bus = &dev->i2c_bus[0];
863 i2c_bus2 = &dev->i2c_bus[1];
864 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
865 &magicpro_prohdtve2_lgs8g75_config,
866 &i2c_bus->i2c_adap);
867 if (fe0->dvb.frontend != NULL) {
868 dvb_attach(xc5000_attach,
869 fe0->dvb.frontend,
870 &i2c_bus2->i2c_adap,
871 &magicpro_prohdtve2_xc5000_config);
872 }
873 break;
874 case CX23885_BOARD_HAUPPAUGE_HVR1850:
875 i2c_bus = &dev->i2c_bus[0];
876 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
877 &hcw_s5h1411_config,
878 &i2c_bus->i2c_adap);
879 if (fe0->dvb.frontend != NULL)
880 dvb_attach(tda18271_attach, fe0->dvb.frontend,
881 0x60, &dev->i2c_bus[0].i2c_adap,
882 &hauppauge_tda18271_config);
883 break;
884
885 default:
886 printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
887 " isn't supported yet\n",
888 dev->name);
889 break;
890 }
891 if (NULL == fe0->dvb.frontend) {
892 printk(KERN_ERR "%s: frontend initialization failed\n",
893 dev->name);
894 return -1;
895 }
896 /* define general-purpose callback pointer */
897 fe0->dvb.frontend->callback = cx23885_tuner_callback;
898
899 /* Put the analog decoder in standby to keep it quiet */
900 call_all(dev, tuner, s_standby);
901
902 if (fe0->dvb.frontend->ops.analog_ops.standby)
903 fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
904
905 /* register everything */
906 ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
907 &dev->pci->dev, adapter_nr, 0);
908
909 /* init CI & MAC */
910 switch (dev->board) {
911 case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
912 static struct netup_card_info cinfo;
913
914 netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
915 memcpy(port->frontends.adapter.proposed_mac,
916 cinfo.port[port->nr - 1].mac, 6);
917 printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC="
918 "%02X:%02X:%02X:%02X:%02X:%02X\n",
919 port->nr,
920 port->frontends.adapter.proposed_mac[0],
921 port->frontends.adapter.proposed_mac[1],
922 port->frontends.adapter.proposed_mac[2],
923 port->frontends.adapter.proposed_mac[3],
924 port->frontends.adapter.proposed_mac[4],
925 port->frontends.adapter.proposed_mac[5]);
926
927 netup_ci_init(port);
928 break;
929 }
930 }
931
932 return ret;
933 }
934
935 int cx23885_dvb_register(struct cx23885_tsport *port)
936 {
937
938 struct videobuf_dvb_frontend *fe0;
939 struct cx23885_dev *dev = port->dev;
940 int err, i;
941
942 /* Here we need to allocate the correct number of frontends,
943 * as reflected in the cards struct. The reality is that currrently
944 * no cx23885 boards support this - yet. But, if we don't modify this
945 * code then the second frontend would never be allocated (later)
946 * and fail with error before the attach in dvb_register().
947 * Without these changes we risk an OOPS later. The changes here
948 * are for safety, and should provide a good foundation for the
949 * future addition of any multi-frontend cx23885 based boards.
950 */
951 printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
952 port->num_frontends);
953
954 for (i = 1; i <= port->num_frontends; i++) {
955 if (videobuf_dvb_alloc_frontend(
956 &port->frontends, i) == NULL) {
957 printk(KERN_ERR "%s() failed to alloc\n", __func__);
958 return -ENOMEM;
959 }
960
961 fe0 = videobuf_dvb_get_frontend(&port->frontends, i);
962 if (!fe0)
963 err = -EINVAL;
964
965 dprintk(1, "%s\n", __func__);
966 dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n",
967 dev->board,
968 dev->name,
969 dev->pci_bus,
970 dev->pci_slot);
971
972 err = -ENODEV;
973
974 /* dvb stuff */
975 /* We have to init the queue for each frontend on a port. */
976 printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name);
977 videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops,
978 &dev->pci->dev, &port->slock,
979 V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
980 sizeof(struct cx23885_buffer), port);
981 }
982 err = dvb_register(port);
983 if (err != 0)
984 printk(KERN_ERR "%s() dvb_register failed err = %d\n",
985 __func__, err);
986
987 return err;
988 }
989
990 int cx23885_dvb_unregister(struct cx23885_tsport *port)
991 {
992 struct videobuf_dvb_frontend *fe0;
993
994 /* FIXME: in an error condition where the we have
995 * an expected number of frontends (attach problem)
996 * then this might not clean up correctly, if 1
997 * is invalid.
998 * This comment only applies to future boards IF they
999 * implement MFE support.
1000 */
1001 fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
1002 if (fe0->dvb.frontend)
1003 videobuf_dvb_unregister_bus(&port->frontends);
1004
1005 switch (port->dev->board) {
1006 case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
1007 netup_ci_exit(port);
1008 break;
1009 }
1010
1011 return 0;
1012 }
1013
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree