nand: davinci: add support for timing configuration
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-davinci / include / mach / nand.h
blob025151049f0517a103c4efb96ee86d465c3fff19
1 /*
2 * mach-davinci/nand.h
4 * Copyright © 2006 Texas Instruments.
6 * Ported to 2.6.23 Copyright © 2008 by
7 * Sander Huijsen <Shuijsen@optelecom-nkf.com>
8 * Troy Kisky <troy.kisky@boundarydevices.com>
9 * Dirk Behme <Dirk.Behme@gmail.com>
11 * --------------------------------------------------------------------------
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #ifndef __ARCH_ARM_DAVINCI_NAND_H
29 #define __ARCH_ARM_DAVINCI_NAND_H
31 #include <linux/mtd/nand.h>
33 #define NANDFCR_OFFSET 0x60
34 #define NANDFSR_OFFSET 0x64
35 #define NANDF1ECC_OFFSET 0x70
37 /* 4-bit ECC syndrome registers */
38 #define NAND_4BIT_ECC_LOAD_OFFSET 0xbc
39 #define NAND_4BIT_ECC1_OFFSET 0xc0
40 #define NAND_4BIT_ECC2_OFFSET 0xc4
41 #define NAND_4BIT_ECC3_OFFSET 0xc8
42 #define NAND_4BIT_ECC4_OFFSET 0xcc
43 #define NAND_ERR_ADD1_OFFSET 0xd0
44 #define NAND_ERR_ADD2_OFFSET 0xd4
45 #define NAND_ERR_ERRVAL1_OFFSET 0xd8
46 #define NAND_ERR_ERRVAL2_OFFSET 0xdc
48 /* NOTE: boards don't need to use these address bits
49 * for ALE/CLE unless they support booting from NAND.
50 * They're used unless platform data overrides them.
52 #define MASK_ALE 0x08
53 #define MASK_CLE 0x10
55 struct davinci_nand_pdata { /* platform_data */
56 uint32_t mask_ale;
57 uint32_t mask_cle;
59 /* for packages using two chipselects */
60 uint32_t mask_chipsel;
62 /* board's default static partition info */
63 struct mtd_partition *parts;
64 unsigned nr_parts;
66 /* none == NAND_ECC_NONE (strongly *not* advised!!)
67 * soft == NAND_ECC_SOFT
68 * else == NAND_ECC_HW, according to ecc_bits
70 * All DaVinci-family chips support 1-bit hardware ECC.
71 * Newer ones also support 4-bit ECC, but are awkward
72 * using it with large page chips.
74 nand_ecc_modes_t ecc_mode;
75 u8 ecc_bits;
77 /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
78 unsigned options;
80 /* Main and mirror bbt descriptor overrides */
81 struct nand_bbt_descr *bbt_td;
82 struct nand_bbt_descr *bbt_md;
84 /* Access timings */
85 struct davinci_aemif_timing *timing;
88 #endif /* __ARCH_ARM_DAVINCI_NAND_H */