drivers/tty/serial/mxs-auart.c

   1 /*
   2  * Freescale STMP37XX/STMP378X Application UART driver
   3  *
   4  * Author: dmitry pervushin <dimka@embeddedalley.com>
   5  *
   6  * Copyright 2008-2010 Freescale Semiconductor, Inc.
   7  * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
   8  *
   9  * The code contained herein is licensed under the GNU General Public
  10  * License. You may obtain a copy of the GNU General Public License
  11  * Version 2 or later at the following locations:
  12  *
  13  * http://www.opensource.org/licenses/gpl-license.html
  14  * http://www.gnu.org/copyleft/gpl.html
  15  */
  16
  17 #include <linux/kernel.h>
  18 #include <linux/errno.h>
  19 #include <linux/init.h>
  20 #include <linux/console.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/module.h>
  23 #include <linux/slab.h>
  24 #include <linux/wait.h>
  25 #include <linux/tty.h>
  26 #include <linux/tty_driver.h>
  27 #include <linux/tty_flip.h>
  28 #include <linux/serial.h>
  29 #include <linux/serial_core.h>
  30 #include <linux/platform_device.h>
  31 #include <linux/device.h>
  32 #include <linux/clk.h>
  33 #include <linux/delay.h>
  34 #include <linux/io.h>
  35
  36 #include <asm/cacheflush.h>
  37
  38 #define MXS_AUART_PORTS 5
  39
  40 #define AUART_CTRL0                     0x00000000
  41 #define AUART_CTRL0_SET                 0x00000004
  42 #define AUART_CTRL0_CLR                 0x00000008
  43 #define AUART_CTRL0_TOG                 0x0000000c
  44 #define AUART_CTRL1                     0x00000010
  45 #define AUART_CTRL1_SET                 0x00000014
  46 #define AUART_CTRL1_CLR                 0x00000018
  47 #define AUART_CTRL1_TOG                 0x0000001c
  48 #define AUART_CTRL2                     0x00000020
  49 #define AUART_CTRL2_SET                 0x00000024
  50 #define AUART_CTRL2_CLR                 0x00000028
  51 #define AUART_CTRL2_TOG                 0x0000002c
  52 #define AUART_LINECTRL                  0x00000030
  53 #define AUART_LINECTRL_SET              0x00000034
  54 #define AUART_LINECTRL_CLR              0x00000038
  55 #define AUART_LINECTRL_TOG              0x0000003c
  56 #define AUART_LINECTRL2                 0x00000040
  57 #define AUART_LINECTRL2_SET             0x00000044
  58 #define AUART_LINECTRL2_CLR             0x00000048
  59 #define AUART_LINECTRL2_TOG             0x0000004c
  60 #define AUART_INTR                      0x00000050
  61 #define AUART_INTR_SET                  0x00000054
  62 #define AUART_INTR_CLR                  0x00000058
  63 #define AUART_INTR_TOG                  0x0000005c
  64 #define AUART_DATA                      0x00000060
  65 #define AUART_STAT                      0x00000070
  66 #define AUART_DEBUG                     0x00000080
  67 #define AUART_VERSION                   0x00000090
  68 #define AUART_AUTOBAUD                  0x000000a0
  69
  70 #define AUART_CTRL0_SFTRST                      (1 << 31)
  71 #define AUART_CTRL0_CLKGATE                     (1 << 30)
  72
  73 #define AUART_CTRL2_CTSEN                       (1 << 15)
  74 #define AUART_CTRL2_RTS                         (1 << 11)
  75 #define AUART_CTRL2_RXE                         (1 << 9)
  76 #define AUART_CTRL2_TXE                         (1 << 8)
  77 #define AUART_CTRL2_UARTEN                      (1 << 0)
  78
  79 #define AUART_LINECTRL_BAUD_DIVINT_SHIFT        16
  80 #define AUART_LINECTRL_BAUD_DIVINT_MASK         0xffff0000
  81 #define AUART_LINECTRL_BAUD_DIVINT(v)           (((v) & 0xffff) << 16)
  82 #define AUART_LINECTRL_BAUD_DIVFRAC_SHIFT       8
  83 #define AUART_LINECTRL_BAUD_DIVFRAC_MASK        0x00003f00
  84 #define AUART_LINECTRL_BAUD_DIVFRAC(v)          (((v) & 0x3f) << 8)
  85 #define AUART_LINECTRL_WLEN_MASK                0x00000060
  86 #define AUART_LINECTRL_WLEN(v)                  (((v) & 0x3) << 5)
  87 #define AUART_LINECTRL_FEN                      (1 << 4)
  88 #define AUART_LINECTRL_STP2                     (1 << 3)
  89 #define AUART_LINECTRL_EPS                      (1 << 2)
  90 #define AUART_LINECTRL_PEN                      (1 << 1)
  91 #define AUART_LINECTRL_BRK                      (1 << 0)
  92
  93 #define AUART_INTR_RTIEN                        (1 << 22)
  94 #define AUART_INTR_TXIEN                        (1 << 21)
  95 #define AUART_INTR_RXIEN                        (1 << 20)
  96 #define AUART_INTR_CTSMIEN                      (1 << 17)
  97 #define AUART_INTR_RTIS                         (1 << 6)
  98 #define AUART_INTR_TXIS                         (1 << 5)
  99 #define AUART_INTR_RXIS                         (1 << 4)
 100 #define AUART_INTR_CTSMIS                       (1 << 1)
 101
 102 #define AUART_STAT_BUSY                         (1 << 29)
 103 #define AUART_STAT_CTS                          (1 << 28)
 104 #define AUART_STAT_TXFE                         (1 << 27)
 105 #define AUART_STAT_TXFF                         (1 << 25)
 106 #define AUART_STAT_RXFE                         (1 << 24)
 107 #define AUART_STAT_OERR                         (1 << 19)
 108 #define AUART_STAT_BERR                         (1 << 18)
 109 #define AUART_STAT_PERR                         (1 << 17)
 110 #define AUART_STAT_FERR                         (1 << 16)
 111
 112 static struct uart_driver auart_driver;
 113
 114 struct mxs_auart_port {
 115         struct uart_port port;
 116
 117         unsigned int flags;
 118         unsigned int ctrl;
 119
 120         unsigned int irq;
 121
 122         struct clk *clk;
 123         struct device *dev;
 124 };
 125
 126 static void mxs_auart_stop_tx(struct uart_port *u);
 127
 128 #define to_auart_port(u) container_of(u, struct mxs_auart_port, port)
 129
 130 static inline void mxs_auart_tx_chars(struct mxs_auart_port *s)
 131 {
 132         struct circ_buf *xmit = &s->port.state->xmit;
 133
 134         while (!(readl(s->port.membase + AUART_STAT) &
 135                  AUART_STAT_TXFF)) {
 136                 if (s->port.x_char) {
 137                         s->port.icount.tx++;
 138                         writel(s->port.x_char,
 139                                      s->port.membase + AUART_DATA);
 140                         s->port.x_char = 0;
 141                         continue;
 142                 }
 143                 if (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
 144                         s->port.icount.tx++;
 145                         writel(xmit->buf[xmit->tail],
 146                                      s->port.membase + AUART_DATA);
 147                         xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 148                 } else
 149                         break;
 150         }
 151         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 152                 uart_write_wakeup(&s->port);
 153
 154         if (uart_circ_empty(&(s->port.state->xmit)))
 155                 writel(AUART_INTR_TXIEN,
 156                              s->port.membase + AUART_INTR_CLR);
 157         else
 158                 writel(AUART_INTR_TXIEN,
 159                              s->port.membase + AUART_INTR_SET);
 160
 161         if (uart_tx_stopped(&s->port))
 162                 mxs_auart_stop_tx(&s->port);
 163 }
 164
 165 static void mxs_auart_rx_char(struct mxs_auart_port *s)
 166 {
 167         int flag;
 168         u32 stat;
 169         u8 c;
 170
 171         c = readl(s->port.membase + AUART_DATA);
 172         stat = readl(s->port.membase + AUART_STAT);
 173
 174         flag = TTY_NORMAL;
 175         s->port.icount.rx++;
 176
 177         if (stat & AUART_STAT_BERR) {
 178                 s->port.icount.brk++;
 179                 if (uart_handle_break(&s->port))
 180                         goto out;
 181         } else if (stat & AUART_STAT_PERR) {
 182                 s->port.icount.parity++;
 183         } else if (stat & AUART_STAT_FERR) {
 184                 s->port.icount.frame++;
 185         }
 186
 187         /*
 188          * Mask off conditions which should be ingored.
 189          */
 190         stat &= s->port.read_status_mask;
 191
 192         if (stat & AUART_STAT_BERR) {
 193                 flag = TTY_BREAK;
 194         } else if (stat & AUART_STAT_PERR)
 195                 flag = TTY_PARITY;
 196         else if (stat & AUART_STAT_FERR)
 197                 flag = TTY_FRAME;
 198
 199         if (stat & AUART_STAT_OERR)
 200                 s->port.icount.overrun++;
 201
 202         if (uart_handle_sysrq_char(&s->port, c))
 203                 goto out;
 204
 205         uart_insert_char(&s->port, stat, AUART_STAT_OERR, c, flag);
 206 out:
 207         writel(stat, s->port.membase + AUART_STAT);
 208 }
 209
 210 static void mxs_auart_rx_chars(struct mxs_auart_port *s)
 211 {
 212         struct tty_struct *tty = s->port.state->port.tty;
 213         u32 stat = 0;
 214
 215         for (;;) {
 216                 stat = readl(s->port.membase + AUART_STAT);
 217                 if (stat & AUART_STAT_RXFE)
 218                         break;
 219                 mxs_auart_rx_char(s);
 220         }
 221
 222         writel(stat, s->port.membase + AUART_STAT);
 223         tty_flip_buffer_push(tty);
 224 }
 225
 226 static int mxs_auart_request_port(struct uart_port *u)
 227 {
 228         return 0;
 229 }
 230
 231 static int mxs_auart_verify_port(struct uart_port *u,
 232                                     struct serial_struct *ser)
 233 {
 234         if (u->type != PORT_UNKNOWN && u->type != PORT_IMX)
 235                 return -EINVAL;
 236         return 0;
 237 }
 238
 239 static void mxs_auart_config_port(struct uart_port *u, int flags)
 240 {
 241 }
 242
 243 static const char *mxs_auart_type(struct uart_port *u)
 244 {
 245         struct mxs_auart_port *s = to_auart_port(u);
 246
 247         return dev_name(s->dev);
 248 }
 249
 250 static void mxs_auart_release_port(struct uart_port *u)
 251 {
 252 }
 253
 254 static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
 255 {
 256         struct mxs_auart_port *s = to_auart_port(u);
 257
 258         u32 ctrl = readl(u->membase + AUART_CTRL2);
 259
 260         ctrl &= ~AUART_CTRL2_RTS;
 261         if (mctrl & TIOCM_RTS)
 262                 ctrl |= AUART_CTRL2_RTS;
 263         s->ctrl = mctrl;
 264         writel(ctrl, u->membase + AUART_CTRL2);
 265 }
 266
 267 static u32 mxs_auart_get_mctrl(struct uart_port *u)
 268 {
 269         struct mxs_auart_port *s = to_auart_port(u);
 270         u32 stat = readl(u->membase + AUART_STAT);
 271         int ctrl2 = readl(u->membase + AUART_CTRL2);
 272         u32 mctrl = s->ctrl;
 273
 274         mctrl &= ~TIOCM_CTS;
 275         if (stat & AUART_STAT_CTS)
 276                 mctrl |= TIOCM_CTS;
 277
 278         if (ctrl2 & AUART_CTRL2_RTS)
 279                 mctrl |= TIOCM_RTS;
 280
 281         return mctrl;
 282 }
 283
 284 static void mxs_auart_settermios(struct uart_port *u,
 285                                  struct ktermios *termios,
 286                                  struct ktermios *old)
 287 {
 288         u32 bm, ctrl, ctrl2, div;
 289         unsigned int cflag, baud;
 290
 291         cflag = termios->c_cflag;
 292
 293         ctrl = AUART_LINECTRL_FEN;
 294         ctrl2 = readl(u->membase + AUART_CTRL2);
 295
 296         /* byte size */
 297         switch (cflag & CSIZE) {
 298         case CS5:
 299                 bm = 0;
 300                 break;
 301         case CS6:
 302                 bm = 1;
 303                 break;
 304         case CS7:
 305                 bm = 2;
 306                 break;
 307         case CS8:
 308                 bm = 3;
 309                 break;
 310         default:
 311                 return;
 312         }
 313
 314         ctrl |= AUART_LINECTRL_WLEN(bm);
 315
 316         /* parity */
 317         if (cflag & PARENB) {
 318                 ctrl |= AUART_LINECTRL_PEN;
 319                 if ((cflag & PARODD) == 0)
 320                         ctrl |= AUART_LINECTRL_EPS;
 321         }
 322
 323         u->read_status_mask = 0;
 324
 325         if (termios->c_iflag & INPCK)
 326                 u->read_status_mask |= AUART_STAT_PERR;
 327         if (termios->c_iflag & (BRKINT | PARMRK))
 328                 u->read_status_mask |= AUART_STAT_BERR;
 329
 330         /*
 331          * Characters to ignore
 332          */
 333         u->ignore_status_mask = 0;
 334         if (termios->c_iflag & IGNPAR)
 335                 u->ignore_status_mask |= AUART_STAT_PERR;
 336         if (termios->c_iflag & IGNBRK) {
 337                 u->ignore_status_mask |= AUART_STAT_BERR;
 338                 /*
 339                  * If we're ignoring parity and break indicators,
 340                  * ignore overruns too (for real raw support).
 341                  */
 342                 if (termios->c_iflag & IGNPAR)
 343                         u->ignore_status_mask |= AUART_STAT_OERR;
 344         }
 345
 346         /*
 347          * ignore all characters if CREAD is not set
 348          */
 349         if (cflag & CREAD)
 350                 ctrl2 |= AUART_CTRL2_RXE;
 351         else
 352                 ctrl2 &= ~AUART_CTRL2_RXE;
 353
 354         /* figure out the stop bits requested */
 355         if (cflag & CSTOPB)
 356                 ctrl |= AUART_LINECTRL_STP2;
 357
 358         /* figure out the hardware flow control settings */
 359         if (cflag & CRTSCTS)
 360                 ctrl2 |= AUART_CTRL2_CTSEN;
 361         else
 362                 ctrl2 &= ~AUART_CTRL2_CTSEN;
 363
 364         /* set baud rate */
 365         baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk);
 366         div = u->uartclk * 32 / baud;
 367         ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F);
 368         ctrl |= AUART_LINECTRL_BAUD_DIVINT(div >> 6);
 369
 370         writel(ctrl, u->membase + AUART_LINECTRL);
 371         writel(ctrl2, u->membase + AUART_CTRL2);
 372
 373         uart_update_timeout(u, termios->c_cflag, baud);
 374 }
 375
 376 static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
 377 {
 378         u32 istatus, istat;
 379         struct mxs_auart_port *s = context;
 380         u32 stat = readl(s->port.membase + AUART_STAT);
 381
 382         istatus = istat = readl(s->port.membase + AUART_INTR);
 383
 384         if (istat & AUART_INTR_CTSMIS) {
 385                 uart_handle_cts_change(&s->port, stat & AUART_STAT_CTS);
 386                 writel(AUART_INTR_CTSMIS,
 387                                 s->port.membase + AUART_INTR_CLR);
 388                 istat &= ~AUART_INTR_CTSMIS;
 389         }
 390
 391         if (istat & (AUART_INTR_RTIS | AUART_INTR_RXIS)) {
 392                 mxs_auart_rx_chars(s);
 393                 istat &= ~(AUART_INTR_RTIS | AUART_INTR_RXIS);
 394         }
 395
 396         if (istat & AUART_INTR_TXIS) {
 397                 mxs_auart_tx_chars(s);
 398                 istat &= ~AUART_INTR_TXIS;
 399         }
 400
 401         writel(istatus & (AUART_INTR_RTIS
 402                 | AUART_INTR_TXIS
 403                 | AUART_INTR_RXIS
 404                 | AUART_INTR_CTSMIS),
 405                         s->port.membase + AUART_INTR_CLR);
 406
 407         return IRQ_HANDLED;
 408 }
 409
 410 static void mxs_auart_reset(struct uart_port *u)
 411 {
 412         int i;
 413         unsigned int reg;
 414
 415         writel(AUART_CTRL0_SFTRST, u->membase + AUART_CTRL0_CLR);
 416
 417         for (i = 0; i < 10000; i++) {
 418                 reg = readl(u->membase + AUART_CTRL0);
 419                 if (!(reg & AUART_CTRL0_SFTRST))
 420                         break;
 421                 udelay(3);
 422         }
 423         writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
 424 }
 425
 426 static int mxs_auart_startup(struct uart_port *u)
 427 {
 428         struct mxs_auart_port *s = to_auart_port(u);
 429
 430         clk_prepare_enable(s->clk);
 431
 432         writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
 433
 434         writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_SET);
 435
 436         writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
 437                         u->membase + AUART_INTR);
 438
 439         /*
 440          * Enable fifo so all four bytes of a DMA word are written to
 441          * output (otherwise, only the LSB is written, ie. 1 in 4 bytes)
 442          */
 443         writel(AUART_LINECTRL_FEN, u->membase + AUART_LINECTRL_SET);
 444
 445         return 0;
 446 }
 447
 448 static void mxs_auart_shutdown(struct uart_port *u)
 449 {
 450         struct mxs_auart_port *s = to_auart_port(u);
 451
 452         writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR);
 453
 454         writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
 455
 456         writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
 457                         u->membase + AUART_INTR_CLR);
 458
 459         clk_disable_unprepare(s->clk);
 460 }
 461
 462 static unsigned int mxs_auart_tx_empty(struct uart_port *u)
 463 {
 464         if (readl(u->membase + AUART_STAT) & AUART_STAT_TXFE)
 465                 return TIOCSER_TEMT;
 466         else
 467                 return 0;
 468 }
 469
 470 static void mxs_auart_start_tx(struct uart_port *u)
 471 {
 472         struct mxs_auart_port *s = to_auart_port(u);
 473
 474         /* enable transmitter */
 475         writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_SET);
 476
 477         mxs_auart_tx_chars(s);
 478 }
 479
 480 static void mxs_auart_stop_tx(struct uart_port *u)
 481 {
 482         writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_CLR);
 483 }
 484
 485 static void mxs_auart_stop_rx(struct uart_port *u)
 486 {
 487         writel(AUART_CTRL2_RXE, u->membase + AUART_CTRL2_CLR);
 488 }
 489
 490 static void mxs_auart_break_ctl(struct uart_port *u, int ctl)
 491 {
 492         if (ctl)
 493                 writel(AUART_LINECTRL_BRK,
 494                              u->membase + AUART_LINECTRL_SET);
 495         else
 496                 writel(AUART_LINECTRL_BRK,
 497                              u->membase + AUART_LINECTRL_CLR);
 498 }
 499
 500 static void mxs_auart_enable_ms(struct uart_port *port)
 501 {
 502         /* just empty */
 503 }
 504
 505 static struct uart_ops mxs_auart_ops = {
 506         .tx_empty       = mxs_auart_tx_empty,
 507         .start_tx       = mxs_auart_start_tx,
 508         .stop_tx        = mxs_auart_stop_tx,
 509         .stop_rx        = mxs_auart_stop_rx,
 510         .enable_ms      = mxs_auart_enable_ms,
 511         .break_ctl      = mxs_auart_break_ctl,
 512         .set_mctrl      = mxs_auart_set_mctrl,
 513         .get_mctrl      = mxs_auart_get_mctrl,
 514         .startup        = mxs_auart_startup,
 515         .shutdown       = mxs_auart_shutdown,
 516         .set_termios    = mxs_auart_settermios,
 517         .type           = mxs_auart_type,
 518         .release_port   = mxs_auart_release_port,
 519         .request_port   = mxs_auart_request_port,
 520         .config_port    = mxs_auart_config_port,
 521         .verify_port    = mxs_auart_verify_port,
 522 };
 523
 524 static struct mxs_auart_port *auart_port[MXS_AUART_PORTS];
 525
 526 #ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
 527 static void mxs_auart_console_putchar(struct uart_port *port, int ch)
 528 {
 529         unsigned int to = 1000;
 530
 531         while (readl(port->membase + AUART_STAT) & AUART_STAT_TXFF) {
 532                 if (!to--)
 533                         break;
 534                 udelay(1);
 535         }
 536
 537         writel(ch, port->membase + AUART_DATA);
 538 }
 539
 540 static void
 541 auart_console_write(struct console *co, const char *str, unsigned int count)
 542 {
 543         struct mxs_auart_port *s;
 544         struct uart_port *port;
 545         unsigned int old_ctrl0, old_ctrl2;
 546         unsigned int to = 1000;
 547
 548         if (co->index > MXS_AUART_PORTS || co->index < 0)
 549                 return;
 550
 551         s = auart_port[co->index];
 552         port = &s->port;
 553
 554         clk_enable(s->clk);
 555
 556         /* First save the CR then disable the interrupts */
 557         old_ctrl2 = readl(port->membase + AUART_CTRL2);
 558         old_ctrl0 = readl(port->membase + AUART_CTRL0);
 559
 560         writel(AUART_CTRL0_CLKGATE,
 561                      port->membase + AUART_CTRL0_CLR);
 562         writel(AUART_CTRL2_UARTEN | AUART_CTRL2_TXE,
 563                      port->membase + AUART_CTRL2_SET);
 564
 565         uart_console_write(port, str, count, mxs_auart_console_putchar);
 566
 567         /*
 568          * Finally, wait for transmitter to become empty
 569          * and restore the TCR
 570          */
 571         while (readl(port->membase + AUART_STAT) & AUART_STAT_BUSY) {
 572                 if (!to--)
 573                         break;
 574                 udelay(1);
 575         }
 576
 577         writel(old_ctrl0, port->membase + AUART_CTRL0);
 578         writel(old_ctrl2, port->membase + AUART_CTRL2);
 579
 580         clk_disable(s->clk);
 581 }
 582
 583 static void __init
 584 auart_console_get_options(struct uart_port *port, int *baud,
 585                           int *parity, int *bits)
 586 {
 587         unsigned int lcr_h, quot;
 588
 589         if (!(readl(port->membase + AUART_CTRL2) & AUART_CTRL2_UARTEN))
 590                 return;
 591
 592         lcr_h = readl(port->membase + AUART_LINECTRL);
 593
 594         *parity = 'n';
 595         if (lcr_h & AUART_LINECTRL_PEN) {
 596                 if (lcr_h & AUART_LINECTRL_EPS)
 597                         *parity = 'e';
 598                 else
 599                         *parity = 'o';
 600         }
 601
 602         if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(2))
 603                 *bits = 7;
 604         else
 605                 *bits = 8;
 606
 607         quot = ((readl(port->membase + AUART_LINECTRL)
 608                         & AUART_LINECTRL_BAUD_DIVINT_MASK))
 609                             >> (AUART_LINECTRL_BAUD_DIVINT_SHIFT - 6);
 610         quot |= ((readl(port->membase + AUART_LINECTRL)
 611                         & AUART_LINECTRL_BAUD_DIVFRAC_MASK))
 612                                 >> AUART_LINECTRL_BAUD_DIVFRAC_SHIFT;
 613         if (quot == 0)
 614                 quot = 1;
 615
 616         *baud = (port->uartclk << 2) / quot;
 617 }
 618
 619 static int __init
 620 auart_console_setup(struct console *co, char *options)
 621 {
 622         struct mxs_auart_port *s;
 623         int baud = 9600;
 624         int bits = 8;
 625         int parity = 'n';
 626         int flow = 'n';
 627         int ret;
 628
 629         /*
 630          * Check whether an invalid uart number has been specified, and
 631          * if so, search for the first available port that does have
 632          * console support.
 633          */
 634         if (co->index == -1 || co->index >= ARRAY_SIZE(auart_port))
 635                 co->index = 0;
 636         s = auart_port[co->index];
 637         if (!s)
 638                 return -ENODEV;
 639
 640         clk_prepare_enable(s->clk);
 641
 642         if (options)
 643                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 644         else
 645                 auart_console_get_options(&s->port, &baud, &parity, &bits);
 646
 647         ret = uart_set_options(&s->port, co, baud, parity, bits, flow);
 648
 649         clk_disable_unprepare(s->clk);
 650
 651         return ret;
 652 }
 653
 654 static struct console auart_console = {
 655         .name           = "ttyAPP",
 656         .write          = auart_console_write,
 657         .device         = uart_console_device,
 658         .setup          = auart_console_setup,
 659         .flags          = CON_PRINTBUFFER,
 660         .index          = -1,
 661         .data           = &auart_driver,
 662 };
 663 #endif
 664
 665 static struct uart_driver auart_driver = {
 666         .owner          = THIS_MODULE,
 667         .driver_name    = "ttyAPP",
 668         .dev_name       = "ttyAPP",
 669         .major          = 0,
 670         .minor          = 0,
 671         .nr             = MXS_AUART_PORTS,
 672 #ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
 673         .cons =         &auart_console,
 674 #endif
 675 };
 676
 677 static int __devinit mxs_auart_probe(struct platform_device *pdev)
 678 {
 679         struct mxs_auart_port *s;
 680         u32 version;
 681         int ret = 0;
 682         struct resource *r;
 683
 684         s = kzalloc(sizeof(struct mxs_auart_port), GFP_KERNEL);
 685         if (!s) {
 686                 ret = -ENOMEM;
 687                 goto out;
 688         }
 689
 690         s->clk = clk_get(&pdev->dev, NULL);
 691         if (IS_ERR(s->clk)) {
 692                 ret = PTR_ERR(s->clk);
 693                 goto out_free;
 694         }
 695
 696         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 697         if (!r) {
 698                 ret = -ENXIO;
 699                 goto out_free_clk;
 700         }
 701
 702         s->port.mapbase = r->start;
 703         s->port.membase = ioremap(r->start, resource_size(r));
 704         s->port.ops = &mxs_auart_ops;
 705         s->port.iotype = UPIO_MEM;
 706         s->port.line = pdev->id < 0 ? 0 : pdev->id;
 707         s->port.fifosize = 16;
 708         s->port.uartclk = clk_get_rate(s->clk);
 709         s->port.type = PORT_IMX;
 710         s->port.dev = s->dev = get_device(&pdev->dev);
 711
 712         s->flags = 0;
 713         s->ctrl = 0;
 714
 715         s->irq = platform_get_irq(pdev, 0);
 716         s->port.irq = s->irq;
 717         ret = request_irq(s->irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s);
 718         if (ret)
 719                 goto out_free_clk;
 720
 721         platform_set_drvdata(pdev, s);
 722
 723         auart_port[pdev->id] = s;
 724
 725         mxs_auart_reset(&s->port);
 726
 727         ret = uart_add_one_port(&auart_driver, &s->port);
 728         if (ret)
 729                 goto out_free_irq;
 730
 731         version = readl(s->port.membase + AUART_VERSION);
 732         dev_info(&pdev->dev, "Found APPUART %d.%d.%d\n",
 733                (version >> 24) & 0xff,
 734                (version >> 16) & 0xff, version & 0xffff);
 735
 736         return 0;
 737
 738 out_free_irq:
 739         auart_port[pdev->id] = NULL;
 740         free_irq(s->irq, s);
 741 out_free_clk:
 742         clk_put(s->clk);
 743 out_free:
 744         kfree(s);
 745 out:
 746         return ret;
 747 }
 748
 749 static int __devexit mxs_auart_remove(struct platform_device *pdev)
 750 {
 751         struct mxs_auart_port *s = platform_get_drvdata(pdev);
 752
 753         uart_remove_one_port(&auart_driver, &s->port);
 754
 755         auart_port[pdev->id] = NULL;
 756
 757         clk_put(s->clk);
 758         free_irq(s->irq, s);
 759         kfree(s);
 760
 761         return 0;
 762 }
 763
 764 static struct platform_driver mxs_auart_driver = {
 765         .probe = mxs_auart_probe,
 766         .remove = __devexit_p(mxs_auart_remove),
 767         .driver = {
 768                 .name = "mxs-auart",
 769                 .owner = THIS_MODULE,
 770         },
 771 };
 772
 773 static int __init mxs_auart_init(void)
 774 {
 775         int r;
 776
 777         r = uart_register_driver(&auart_driver);
 778         if (r)
 779                 goto out;
 780
 781         r = platform_driver_register(&mxs_auart_driver);
 782         if (r)
 783                 goto out_err;
 784
 785         return 0;
 786 out_err:
 787         uart_unregister_driver(&auart_driver);
 788 out:
 789         return r;
 790 }
 791
 792 static void __exit mxs_auart_exit(void)
 793 {
 794         platform_driver_unregister(&mxs_auart_driver);
 795         uart_unregister_driver(&auart_driver);
 796 }
 797
 798 module_init(mxs_auart_init);
 799 module_exit(mxs_auart_exit);
 800 MODULE_LICENSE("GPL");
 801 MODULE_DESCRIPTION("Freescale MXS application uart driver");