iwlagn: remove un-necessary "_agn"
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / wireless / iwlwifi / iwl-scan.c
blobdd6937e970553c942a05d72d07418a5f1c4a524a
1 /******************************************************************************
3 * GPL LICENSE SUMMARY
5 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
19 * USA
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *****************************************************************************/
28 #include <linux/slab.h>
29 #include <linux/types.h>
30 #include <linux/etherdevice.h>
31 #include <net/mac80211.h>
33 #include "iwl-eeprom.h"
34 #include "iwl-dev.h"
35 #include "iwl-core.h"
36 #include "iwl-sta.h"
37 #include "iwl-io.h"
38 #include "iwl-helpers.h"
39 #include "iwl-agn.h"
40 #include "iwl-trans.h"
42 /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
43 * sending probe req. This should be set long enough to hear probe responses
44 * from more than one AP. */
45 #define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */
46 #define IWL_ACTIVE_DWELL_TIME_52 (20)
48 #define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
49 #define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
51 /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
52 * Must be set longer than active dwell time.
53 * For the most reliable scan, set > AP beacon interval (typically 100msec). */
54 #define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
55 #define IWL_PASSIVE_DWELL_TIME_52 (10)
56 #define IWL_PASSIVE_DWELL_BASE (100)
57 #define IWL_CHANNEL_TUNE_TIME 5
59 static int iwl_send_scan_abort(struct iwl_priv *priv)
61 int ret;
62 struct iwl_rx_packet *pkt;
63 struct iwl_host_cmd cmd = {
64 .id = REPLY_SCAN_ABORT_CMD,
65 .flags = CMD_SYNC | CMD_WANT_SKB,
68 /* Exit instantly with error when device is not ready
69 * to receive scan abort command or it does not perform
70 * hardware scan currently */
71 if (!test_bit(STATUS_READY, &priv->status) ||
72 !test_bit(STATUS_GEO_CONFIGURED, &priv->status) ||
73 !test_bit(STATUS_SCAN_HW, &priv->status) ||
74 test_bit(STATUS_FW_ERROR, &priv->status) ||
75 test_bit(STATUS_EXIT_PENDING, &priv->status))
76 return -EIO;
78 ret = trans_send_cmd(&priv->trans, &cmd);
79 if (ret)
80 return ret;
82 pkt = (struct iwl_rx_packet *)cmd.reply_page;
83 if (pkt->u.status != CAN_ABORT_STATUS) {
84 /* The scan abort will return 1 for success or
85 * 2 for "failure". A failure condition can be
86 * due to simply not being in an active scan which
87 * can occur if we send the scan abort before we
88 * the microcode has notified us that a scan is
89 * completed. */
90 IWL_DEBUG_SCAN(priv, "SCAN_ABORT ret %d.\n", pkt->u.status);
91 ret = -EIO;
94 iwl_free_pages(priv, cmd.reply_page);
95 return ret;
98 static void iwl_complete_scan(struct iwl_priv *priv, bool aborted)
100 /* check if scan was requested from mac80211 */
101 if (priv->scan_request) {
102 IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n");
103 ieee80211_scan_completed(priv->hw, aborted);
106 priv->scan_type = IWL_SCAN_NORMAL;
107 priv->scan_vif = NULL;
108 priv->scan_request = NULL;
111 void iwl_force_scan_end(struct iwl_priv *priv)
113 lockdep_assert_held(&priv->mutex);
115 if (!test_bit(STATUS_SCANNING, &priv->status)) {
116 IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n");
117 return;
120 IWL_DEBUG_SCAN(priv, "Forcing scan end\n");
121 clear_bit(STATUS_SCANNING, &priv->status);
122 clear_bit(STATUS_SCAN_HW, &priv->status);
123 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
124 iwl_complete_scan(priv, true);
127 static void iwl_do_scan_abort(struct iwl_priv *priv)
129 int ret;
131 lockdep_assert_held(&priv->mutex);
133 if (!test_bit(STATUS_SCANNING, &priv->status)) {
134 IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n");
135 return;
138 if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) {
139 IWL_DEBUG_SCAN(priv, "Scan abort in progress\n");
140 return;
143 ret = iwl_send_scan_abort(priv);
144 if (ret) {
145 IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret);
146 iwl_force_scan_end(priv);
147 } else
148 IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n");
152 * iwl_scan_cancel - Cancel any currently executing HW scan
154 int iwl_scan_cancel(struct iwl_priv *priv)
156 IWL_DEBUG_SCAN(priv, "Queuing abort scan\n");
157 queue_work(priv->workqueue, &priv->abort_scan);
158 return 0;
162 * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
163 * @ms: amount of time to wait (in milliseconds) for scan to abort
166 int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
168 unsigned long timeout = jiffies + msecs_to_jiffies(ms);
170 lockdep_assert_held(&priv->mutex);
172 IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n");
174 iwl_do_scan_abort(priv);
176 while (time_before_eq(jiffies, timeout)) {
177 if (!test_bit(STATUS_SCAN_HW, &priv->status))
178 break;
179 msleep(20);
182 return test_bit(STATUS_SCAN_HW, &priv->status);
185 /* Service response to REPLY_SCAN_CMD (0x80) */
186 static void iwl_rx_reply_scan(struct iwl_priv *priv,
187 struct iwl_rx_mem_buffer *rxb)
189 #ifdef CONFIG_IWLWIFI_DEBUG
190 struct iwl_rx_packet *pkt = rxb_addr(rxb);
191 struct iwl_scanreq_notification *notif =
192 (struct iwl_scanreq_notification *)pkt->u.raw;
194 IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status);
195 #endif
198 /* Service SCAN_START_NOTIFICATION (0x82) */
199 static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
200 struct iwl_rx_mem_buffer *rxb)
202 struct iwl_rx_packet *pkt = rxb_addr(rxb);
203 struct iwl_scanstart_notification *notif =
204 (struct iwl_scanstart_notification *)pkt->u.raw;
205 priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
206 IWL_DEBUG_SCAN(priv, "Scan start: "
207 "%d [802.11%s] "
208 "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
209 notif->channel,
210 notif->band ? "bg" : "a",
211 le32_to_cpu(notif->tsf_high),
212 le32_to_cpu(notif->tsf_low),
213 notif->status, notif->beacon_timer);
216 /* Service SCAN_RESULTS_NOTIFICATION (0x83) */
217 static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
218 struct iwl_rx_mem_buffer *rxb)
220 #ifdef CONFIG_IWLWIFI_DEBUG
221 struct iwl_rx_packet *pkt = rxb_addr(rxb);
222 struct iwl_scanresults_notification *notif =
223 (struct iwl_scanresults_notification *)pkt->u.raw;
225 IWL_DEBUG_SCAN(priv, "Scan ch.res: "
226 "%d [802.11%s] "
227 "(TSF: 0x%08X:%08X) - %d "
228 "elapsed=%lu usec\n",
229 notif->channel,
230 notif->band ? "bg" : "a",
231 le32_to_cpu(notif->tsf_high),
232 le32_to_cpu(notif->tsf_low),
233 le32_to_cpu(notif->statistics[0]),
234 le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf);
235 #endif
238 /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
239 static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
240 struct iwl_rx_mem_buffer *rxb)
242 struct iwl_rx_packet *pkt = rxb_addr(rxb);
243 struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
245 IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
246 scan_notif->scanned_channels,
247 scan_notif->tsf_low,
248 scan_notif->tsf_high, scan_notif->status);
250 /* The HW is no longer scanning */
251 clear_bit(STATUS_SCAN_HW, &priv->status);
253 IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n",
254 (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
255 jiffies_to_msecs(jiffies - priv->scan_start));
257 queue_work(priv->workqueue, &priv->scan_completed);
259 if (priv->iw_mode != NL80211_IFTYPE_ADHOC &&
260 iwl_advanced_bt_coexist(priv) &&
261 priv->bt_status != scan_notif->bt_status) {
262 if (scan_notif->bt_status) {
263 /* BT on */
264 if (!priv->bt_ch_announce)
265 priv->bt_traffic_load =
266 IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
268 * otherwise, no traffic load information provided
269 * no changes made
271 } else {
272 /* BT off */
273 priv->bt_traffic_load =
274 IWL_BT_COEX_TRAFFIC_LOAD_NONE;
276 priv->bt_status = scan_notif->bt_status;
277 queue_work(priv->workqueue, &priv->bt_traffic_change_work);
281 void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
283 /* scan handlers */
284 priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan;
285 priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif;
286 priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
287 iwl_rx_scan_results_notif;
288 priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
289 iwl_rx_scan_complete_notif;
292 inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
293 enum ieee80211_band band,
294 u8 n_probes)
296 if (band == IEEE80211_BAND_5GHZ)
297 return IWL_ACTIVE_DWELL_TIME_52 +
298 IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
299 else
300 return IWL_ACTIVE_DWELL_TIME_24 +
301 IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
304 u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
305 enum ieee80211_band band,
306 struct ieee80211_vif *vif)
308 struct iwl_rxon_context *ctx;
309 u16 passive = (band == IEEE80211_BAND_2GHZ) ?
310 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
311 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
313 if (iwl_is_any_associated(priv)) {
315 * If we're associated, we clamp the maximum passive
316 * dwell time to be 98% of the smallest beacon interval
317 * (minus 2 * channel tune time)
319 for_each_context(priv, ctx) {
320 u16 value;
322 if (!iwl_is_associated_ctx(ctx))
323 continue;
324 value = ctx->vif ? ctx->vif->bss_conf.beacon_int : 0;
325 if ((value > IWL_PASSIVE_DWELL_BASE) || !value)
326 value = IWL_PASSIVE_DWELL_BASE;
327 value = (value * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
328 passive = min(value, passive);
332 return passive;
335 void iwl_init_scan_params(struct iwl_priv *priv)
337 u8 ant_idx = fls(priv->hw_params.valid_tx_ant) - 1;
338 if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ])
339 priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx;
340 if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
341 priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
344 int __must_check iwl_scan_initiate(struct iwl_priv *priv,
345 struct ieee80211_vif *vif,
346 enum iwl_scan_type scan_type,
347 enum ieee80211_band band)
349 int ret;
351 lockdep_assert_held(&priv->mutex);
353 cancel_delayed_work(&priv->scan_check);
355 if (!iwl_is_ready_rf(priv)) {
356 IWL_WARN(priv, "Request scan called when driver not ready.\n");
357 return -EIO;
360 if (test_bit(STATUS_SCAN_HW, &priv->status)) {
361 IWL_DEBUG_SCAN(priv,
362 "Multiple concurrent scan requests in parallel.\n");
363 return -EBUSY;
366 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
367 IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n");
368 return -EBUSY;
371 IWL_DEBUG_SCAN(priv, "Starting %sscan...\n",
372 scan_type == IWL_SCAN_NORMAL ? "" :
373 scan_type == IWL_SCAN_OFFCH_TX ? "offchan TX " :
374 "internal short ");
376 set_bit(STATUS_SCANNING, &priv->status);
377 priv->scan_type = scan_type;
378 priv->scan_start = jiffies;
379 priv->scan_band = band;
381 ret = iwlagn_request_scan(priv, vif);
382 if (ret) {
383 clear_bit(STATUS_SCANNING, &priv->status);
384 priv->scan_type = IWL_SCAN_NORMAL;
385 return ret;
388 queue_delayed_work(priv->workqueue, &priv->scan_check,
389 IWL_SCAN_CHECK_WATCHDOG);
391 return 0;
394 int iwl_mac_hw_scan(struct ieee80211_hw *hw,
395 struct ieee80211_vif *vif,
396 struct cfg80211_scan_request *req)
398 struct iwl_priv *priv = hw->priv;
399 int ret;
401 IWL_DEBUG_MAC80211(priv, "enter\n");
403 if (req->n_channels == 0)
404 return -EINVAL;
406 mutex_lock(&priv->mutex);
408 if (test_bit(STATUS_SCANNING, &priv->status) &&
409 priv->scan_type != IWL_SCAN_NORMAL) {
410 IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
411 ret = -EAGAIN;
412 goto out_unlock;
415 /* mac80211 will only ask for one band at a time */
416 priv->scan_request = req;
417 priv->scan_vif = vif;
420 * If an internal scan is in progress, just set
421 * up the scan_request as per above.
423 if (priv->scan_type != IWL_SCAN_NORMAL) {
424 IWL_DEBUG_SCAN(priv, "SCAN request during internal scan\n");
425 ret = 0;
426 } else
427 ret = iwl_scan_initiate(priv, vif, IWL_SCAN_NORMAL,
428 req->channels[0]->band);
430 IWL_DEBUG_MAC80211(priv, "leave\n");
432 out_unlock:
433 mutex_unlock(&priv->mutex);
435 return ret;
439 * internal short scan, this function should only been called while associated.
440 * It will reset and tune the radio to prevent possible RF related problem
442 void iwl_internal_short_hw_scan(struct iwl_priv *priv)
444 queue_work(priv->workqueue, &priv->start_internal_scan);
447 static void iwl_bg_start_internal_scan(struct work_struct *work)
449 struct iwl_priv *priv =
450 container_of(work, struct iwl_priv, start_internal_scan);
452 IWL_DEBUG_SCAN(priv, "Start internal scan\n");
454 mutex_lock(&priv->mutex);
456 if (priv->scan_type == IWL_SCAN_RADIO_RESET) {
457 IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n");
458 goto unlock;
461 if (test_bit(STATUS_SCANNING, &priv->status)) {
462 IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
463 goto unlock;
466 if (iwl_scan_initiate(priv, NULL, IWL_SCAN_RADIO_RESET, priv->band))
467 IWL_DEBUG_SCAN(priv, "failed to start internal short scan\n");
468 unlock:
469 mutex_unlock(&priv->mutex);
472 static void iwl_bg_scan_check(struct work_struct *data)
474 struct iwl_priv *priv =
475 container_of(data, struct iwl_priv, scan_check.work);
477 IWL_DEBUG_SCAN(priv, "Scan check work\n");
479 /* Since we are here firmware does not finish scan and
480 * most likely is in bad shape, so we don't bother to
481 * send abort command, just force scan complete to mac80211 */
482 mutex_lock(&priv->mutex);
483 iwl_force_scan_end(priv);
484 mutex_unlock(&priv->mutex);
488 * iwl_fill_probe_req - fill in all required fields and IE for probe request
491 u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
492 const u8 *ta, const u8 *ies, int ie_len, int left)
494 int len = 0;
495 u8 *pos = NULL;
497 /* Make sure there is enough space for the probe request,
498 * two mandatory IEs and the data */
499 left -= 24;
500 if (left < 0)
501 return 0;
503 frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
504 memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
505 memcpy(frame->sa, ta, ETH_ALEN);
506 memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
507 frame->seq_ctrl = 0;
509 len += 24;
511 /* ...next IE... */
512 pos = &frame->u.probe_req.variable[0];
514 /* fill in our indirect SSID IE */
515 left -= 2;
516 if (left < 0)
517 return 0;
518 *pos++ = WLAN_EID_SSID;
519 *pos++ = 0;
521 len += 2;
523 if (WARN_ON(left < ie_len))
524 return len;
526 if (ies && ie_len) {
527 memcpy(pos, ies, ie_len);
528 len += ie_len;
531 return (u16)len;
534 static void iwl_bg_abort_scan(struct work_struct *work)
536 struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
538 IWL_DEBUG_SCAN(priv, "Abort scan work\n");
540 /* We keep scan_check work queued in case when firmware will not
541 * report back scan completed notification */
542 mutex_lock(&priv->mutex);
543 iwl_scan_cancel_timeout(priv, 200);
544 mutex_unlock(&priv->mutex);
547 static void iwl_bg_scan_completed(struct work_struct *work)
549 struct iwl_priv *priv =
550 container_of(work, struct iwl_priv, scan_completed);
551 bool aborted;
553 IWL_DEBUG_SCAN(priv, "Completed scan.\n");
555 cancel_delayed_work(&priv->scan_check);
557 mutex_lock(&priv->mutex);
559 aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status);
560 if (aborted)
561 IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n");
563 if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) {
564 IWL_DEBUG_SCAN(priv, "Scan already completed.\n");
565 goto out_settings;
568 if (priv->scan_type == IWL_SCAN_OFFCH_TX && priv->offchan_tx_skb) {
569 ieee80211_tx_status_irqsafe(priv->hw,
570 priv->offchan_tx_skb);
571 priv->offchan_tx_skb = NULL;
574 if (priv->scan_type != IWL_SCAN_NORMAL && !aborted) {
575 int err;
577 /* Check if mac80211 requested scan during our internal scan */
578 if (priv->scan_request == NULL)
579 goto out_complete;
581 /* If so request a new scan */
582 err = iwl_scan_initiate(priv, priv->scan_vif, IWL_SCAN_NORMAL,
583 priv->scan_request->channels[0]->band);
584 if (err) {
585 IWL_DEBUG_SCAN(priv,
586 "failed to initiate pending scan: %d\n", err);
587 aborted = true;
588 goto out_complete;
591 goto out;
594 out_complete:
595 iwl_complete_scan(priv, aborted);
597 out_settings:
598 /* Can we still talk to firmware ? */
599 if (!iwl_is_ready_rf(priv))
600 goto out;
602 iwlagn_post_scan(priv);
604 out:
605 mutex_unlock(&priv->mutex);
608 void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
610 INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
611 INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
612 INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
613 INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
616 void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
618 cancel_work_sync(&priv->start_internal_scan);
619 cancel_work_sync(&priv->abort_scan);
620 cancel_work_sync(&priv->scan_completed);
622 if (cancel_delayed_work_sync(&priv->scan_check)) {
623 mutex_lock(&priv->mutex);
624 iwl_force_scan_end(priv);
625 mutex_unlock(&priv->mutex);