2 * boot.c - Architecture-Specific Low-Level ACPI Boot Support
4 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
5 * Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
7 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
26 #include <linux/init.h>
27 #include <linux/acpi.h>
28 #include <linux/acpi_pmtmr.h>
29 #include <linux/efi.h>
30 #include <linux/cpumask.h>
31 #include <linux/module.h>
32 #include <linux/dmi.h>
33 #include <linux/irq.h>
34 #include <linux/slab.h>
35 #include <linux/bootmem.h>
36 #include <linux/ioport.h>
37 #include <linux/pci.h>
39 #include <asm/pci_x86.h>
40 #include <asm/pgtable.h>
41 #include <asm/io_apic.h>
44 #include <asm/mpspec.h>
47 static int __initdata acpi_force
= 0;
50 EXPORT_SYMBOL(acpi_disabled
);
53 # include <asm/proto.h>
54 # include <asm/numa_64.h>
57 #define BAD_MADT_ENTRY(entry, end) ( \
58 (!entry) || (unsigned long)entry + sizeof(*entry) > end || \
59 ((struct acpi_subtable_header *)entry)->length < sizeof(*entry))
61 #define PREFIX "ACPI: "
63 int acpi_noirq
; /* skip ACPI IRQ initialization */
64 int acpi_pci_disabled
; /* skip ACPI PCI scan and IRQ initialization */
65 EXPORT_SYMBOL(acpi_pci_disabled
);
66 int acpi_ht __initdata
= 1; /* enable HT */
72 u8 acpi_sci_flags __initdata
;
73 int acpi_sci_override_gsi __initdata
;
74 int acpi_skip_timer_override __initdata
;
75 int acpi_use_timer_override __initdata
;
77 #ifdef CONFIG_X86_LOCAL_APIC
78 static u64 acpi_lapic_addr __initdata
= APIC_DEFAULT_PHYS_BASE
;
81 #ifndef __HAVE_ARCH_CMPXCHG
82 #warning ACPI uses CMPXCHG, i486 and later hardware
85 /* --------------------------------------------------------------------------
86 Boot-time Configuration
87 -------------------------------------------------------------------------- */
90 * The default interrupt routing model is PIC (8259). This gets
91 * overridden if IOAPICs are enumerated (below).
93 enum acpi_irq_model_id acpi_irq_model
= ACPI_IRQ_MODEL_PIC
;
97 * ISA irqs by default are the first 16 gsis but can be
98 * any gsi as specified by an interrupt source override.
100 static u32 isa_irq_to_gsi
[NR_IRQS_LEGACY
] __read_mostly
= {
101 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
104 static unsigned int gsi_to_irq(unsigned int gsi
)
106 unsigned int irq
= gsi
+ NR_IRQS_LEGACY
;
109 for (i
= 0; i
< NR_IRQS_LEGACY
; i
++) {
110 if (isa_irq_to_gsi
[i
] == gsi
) {
115 /* Provide an identity mapping of gsi == irq
116 * except on truly weird platforms that have
117 * non isa irqs in the first 16 gsis.
119 if (gsi
>= NR_IRQS_LEGACY
)
122 irq
= gsi_end
+ 1 + gsi
;
127 static u32
irq_to_gsi(int irq
)
131 if (irq
< NR_IRQS_LEGACY
)
132 gsi
= isa_irq_to_gsi
[irq
];
133 else if (irq
<= gsi_end
)
135 else if (irq
<= (gsi_end
+ NR_IRQS_LEGACY
))
144 * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
145 * to map the target physical address. The problem is that set_fixmap()
146 * provides a single page, and it is possible that the page is not
148 * By using this area, we can map up to MAX_IO_APICS pages temporarily,
149 * i.e. until the next __va_range() call.
151 * Important Safety Note: The fixed I/O APIC page numbers are *subtracted*
152 * from the fixed base. That's why we start at FIX_IO_APIC_BASE_END and
153 * count idx down while incrementing the phys address.
155 char *__init
__acpi_map_table(unsigned long phys
, unsigned long size
)
161 return early_ioremap(phys
, size
);
163 void __init
__acpi_unmap_table(char *map
, unsigned long size
)
168 early_iounmap(map
, size
);
171 #ifdef CONFIG_X86_LOCAL_APIC
172 static int __init
acpi_parse_madt(struct acpi_table_header
*table
)
174 struct acpi_table_madt
*madt
= NULL
;
179 madt
= (struct acpi_table_madt
*)table
;
181 printk(KERN_WARNING PREFIX
"Unable to map MADT\n");
186 acpi_lapic_addr
= (u64
) madt
->address
;
188 printk(KERN_DEBUG PREFIX
"Local APIC address 0x%08x\n",
192 default_acpi_madt_oem_check(madt
->header
.oem_id
,
193 madt
->header
.oem_table_id
);
198 static void __cpuinit
acpi_register_lapic(int id
, u8 enabled
)
200 unsigned int ver
= 0;
207 if (boot_cpu_physical_apicid
!= -1U)
208 ver
= apic_version
[boot_cpu_physical_apicid
];
210 generic_processor_info(id
, ver
);
214 acpi_parse_x2apic(struct acpi_subtable_header
*header
, const unsigned long end
)
216 struct acpi_madt_local_x2apic
*processor
= NULL
;
218 processor
= (struct acpi_madt_local_x2apic
*)header
;
220 if (BAD_MADT_ENTRY(processor
, end
))
223 acpi_table_print_madt_entry(header
);
225 #ifdef CONFIG_X86_X2APIC
227 * We need to register disabled CPU as well to permit
228 * counting disabled CPUs. This allows us to size
229 * cpus_possible_map more accurately, to permit
230 * to not preallocating memory for all NR_CPUS
231 * when we use CPU hotplug.
233 acpi_register_lapic(processor
->local_apic_id
, /* APIC ID */
234 processor
->lapic_flags
& ACPI_MADT_ENABLED
);
236 printk(KERN_WARNING PREFIX
"x2apic entry ignored\n");
243 acpi_parse_lapic(struct acpi_subtable_header
* header
, const unsigned long end
)
245 struct acpi_madt_local_apic
*processor
= NULL
;
247 processor
= (struct acpi_madt_local_apic
*)header
;
249 if (BAD_MADT_ENTRY(processor
, end
))
252 acpi_table_print_madt_entry(header
);
255 * We need to register disabled CPU as well to permit
256 * counting disabled CPUs. This allows us to size
257 * cpus_possible_map more accurately, to permit
258 * to not preallocating memory for all NR_CPUS
259 * when we use CPU hotplug.
261 acpi_register_lapic(processor
->id
, /* APIC ID */
262 processor
->lapic_flags
& ACPI_MADT_ENABLED
);
268 acpi_parse_sapic(struct acpi_subtable_header
*header
, const unsigned long end
)
270 struct acpi_madt_local_sapic
*processor
= NULL
;
272 processor
= (struct acpi_madt_local_sapic
*)header
;
274 if (BAD_MADT_ENTRY(processor
, end
))
277 acpi_table_print_madt_entry(header
);
279 acpi_register_lapic((processor
->id
<< 8) | processor
->eid
,/* APIC ID */
280 processor
->lapic_flags
& ACPI_MADT_ENABLED
);
286 acpi_parse_lapic_addr_ovr(struct acpi_subtable_header
* header
,
287 const unsigned long end
)
289 struct acpi_madt_local_apic_override
*lapic_addr_ovr
= NULL
;
291 lapic_addr_ovr
= (struct acpi_madt_local_apic_override
*)header
;
293 if (BAD_MADT_ENTRY(lapic_addr_ovr
, end
))
296 acpi_lapic_addr
= lapic_addr_ovr
->address
;
302 acpi_parse_x2apic_nmi(struct acpi_subtable_header
*header
,
303 const unsigned long end
)
305 struct acpi_madt_local_x2apic_nmi
*x2apic_nmi
= NULL
;
307 x2apic_nmi
= (struct acpi_madt_local_x2apic_nmi
*)header
;
309 if (BAD_MADT_ENTRY(x2apic_nmi
, end
))
312 acpi_table_print_madt_entry(header
);
314 if (x2apic_nmi
->lint
!= 1)
315 printk(KERN_WARNING PREFIX
"NMI not connected to LINT 1!\n");
321 acpi_parse_lapic_nmi(struct acpi_subtable_header
* header
, const unsigned long end
)
323 struct acpi_madt_local_apic_nmi
*lapic_nmi
= NULL
;
325 lapic_nmi
= (struct acpi_madt_local_apic_nmi
*)header
;
327 if (BAD_MADT_ENTRY(lapic_nmi
, end
))
330 acpi_table_print_madt_entry(header
);
332 if (lapic_nmi
->lint
!= 1)
333 printk(KERN_WARNING PREFIX
"NMI not connected to LINT 1!\n");
338 #endif /*CONFIG_X86_LOCAL_APIC */
340 #ifdef CONFIG_X86_IO_APIC
343 acpi_parse_ioapic(struct acpi_subtable_header
* header
, const unsigned long end
)
345 struct acpi_madt_io_apic
*ioapic
= NULL
;
347 ioapic
= (struct acpi_madt_io_apic
*)header
;
349 if (BAD_MADT_ENTRY(ioapic
, end
))
352 acpi_table_print_madt_entry(header
);
354 mp_register_ioapic(ioapic
->id
,
355 ioapic
->address
, ioapic
->global_irq_base
);
361 * Parse Interrupt Source Override for the ACPI SCI
363 static void __init
acpi_sci_ioapic_setup(u8 bus_irq
, u16 polarity
, u16 trigger
, u32 gsi
)
365 if (trigger
== 0) /* compatible SCI trigger is level */
368 if (polarity
== 0) /* compatible SCI polarity is low */
371 /* Command-line over-ride via acpi_sci= */
372 if (acpi_sci_flags
& ACPI_MADT_TRIGGER_MASK
)
373 trigger
= (acpi_sci_flags
& ACPI_MADT_TRIGGER_MASK
) >> 2;
375 if (acpi_sci_flags
& ACPI_MADT_POLARITY_MASK
)
376 polarity
= acpi_sci_flags
& ACPI_MADT_POLARITY_MASK
;
379 * mp_config_acpi_legacy_irqs() already setup IRQs < 16
380 * If GSI is < 16, this will update its flags,
381 * else it will create a new mp_irqs[] entry.
383 mp_override_legacy_irq(bus_irq
, polarity
, trigger
, gsi
);
386 * stash over-ride to indicate we've been here
387 * and for later update of acpi_gbl_FADT
389 acpi_sci_override_gsi
= gsi
;
394 acpi_parse_int_src_ovr(struct acpi_subtable_header
* header
,
395 const unsigned long end
)
397 struct acpi_madt_interrupt_override
*intsrc
= NULL
;
399 intsrc
= (struct acpi_madt_interrupt_override
*)header
;
401 if (BAD_MADT_ENTRY(intsrc
, end
))
404 acpi_table_print_madt_entry(header
);
406 if (intsrc
->source_irq
== acpi_gbl_FADT
.sci_interrupt
) {
407 acpi_sci_ioapic_setup(intsrc
->source_irq
,
408 intsrc
->inti_flags
& ACPI_MADT_POLARITY_MASK
,
409 (intsrc
->inti_flags
& ACPI_MADT_TRIGGER_MASK
) >> 2,
414 if (acpi_skip_timer_override
&&
415 intsrc
->source_irq
== 0 && intsrc
->global_irq
== 2) {
416 printk(PREFIX
"BIOS IRQ0 pin2 override ignored.\n");
420 mp_override_legacy_irq(intsrc
->source_irq
,
421 intsrc
->inti_flags
& ACPI_MADT_POLARITY_MASK
,
422 (intsrc
->inti_flags
& ACPI_MADT_TRIGGER_MASK
) >> 2,
429 acpi_parse_nmi_src(struct acpi_subtable_header
* header
, const unsigned long end
)
431 struct acpi_madt_nmi_source
*nmi_src
= NULL
;
433 nmi_src
= (struct acpi_madt_nmi_source
*)header
;
435 if (BAD_MADT_ENTRY(nmi_src
, end
))
438 acpi_table_print_madt_entry(header
);
440 /* TBD: Support nimsrc entries? */
445 #endif /* CONFIG_X86_IO_APIC */
448 * acpi_pic_sci_set_trigger()
450 * use ELCR to set PIC-mode trigger type for SCI
452 * If a PIC-mode SCI is not recognized or gives spurious IRQ7's
453 * it may require Edge Trigger -- use "acpi_sci=edge"
455 * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
456 * for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge.
457 * ECLR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0)
458 * ECLR2 is IRQs 8-15 (IRQ 8, 13 must be 0)
461 void __init
acpi_pic_sci_set_trigger(unsigned int irq
, u16 trigger
)
463 unsigned int mask
= 1 << irq
;
464 unsigned int old
, new;
466 /* Real old ELCR mask */
467 old
= inb(0x4d0) | (inb(0x4d1) << 8);
470 * If we use ACPI to set PCI IRQs, then we should clear ELCR
471 * since we will set it correctly as we enable the PCI irq
474 new = acpi_noirq
? old
: 0;
477 * Update SCI information in the ELCR, it isn't in the PCI
481 case 1: /* Edge - clear */
484 case 3: /* Level - set */
492 printk(PREFIX
"setting ELCR to %04x (from %04x)\n", new, old
);
494 outb(new >> 8, 0x4d1);
497 int acpi_gsi_to_irq(u32 gsi
, unsigned int *irq
)
499 *irq
= gsi_to_irq(gsi
);
501 #ifdef CONFIG_X86_IO_APIC
502 if (acpi_irq_model
== ACPI_IRQ_MODEL_IOAPIC
)
503 setup_IO_APIC_irq_extra(gsi
);
509 int acpi_isa_irq_to_gsi(unsigned isa_irq
, u32
*gsi
)
513 *gsi
= irq_to_gsi(isa_irq
);
518 * success: return IRQ number (>=0)
519 * failure: return < 0
521 int acpi_register_gsi(struct device
*dev
, u32 gsi
, int trigger
, int polarity
)
524 unsigned int plat_gsi
= gsi
;
528 * Make sure all (legacy) PCI IRQs are set as level-triggered.
530 if (acpi_irq_model
== ACPI_IRQ_MODEL_PIC
) {
531 if (trigger
== ACPI_LEVEL_SENSITIVE
)
532 eisa_set_level_irq(gsi
);
536 #ifdef CONFIG_X86_IO_APIC
537 if (acpi_irq_model
== ACPI_IRQ_MODEL_IOAPIC
) {
538 plat_gsi
= mp_register_gsi(dev
, gsi
, trigger
, polarity
);
541 irq
= gsi_to_irq(plat_gsi
);
547 * ACPI based hotplug support for CPU
549 #ifdef CONFIG_ACPI_HOTPLUG_CPU
550 #include <acpi/processor.h>
552 static void acpi_map_cpu2node(acpi_handle handle
, int cpu
, int physid
)
554 #ifdef CONFIG_ACPI_NUMA
557 nid
= acpi_get_node(handle
);
558 if (nid
== -1 || !node_online(nid
))
561 apicid_to_node
[physid
] = nid
;
562 numa_set_node(cpu
, nid
);
563 #else /* CONFIG_X86_32 */
564 apicid_2_node
[physid
] = nid
;
565 cpu_to_node_map
[cpu
] = nid
;
571 static int __cpuinit
_acpi_map_lsapic(acpi_handle handle
, int *pcpu
)
573 struct acpi_buffer buffer
= { ACPI_ALLOCATE_BUFFER
, NULL
};
574 union acpi_object
*obj
;
575 struct acpi_madt_local_apic
*lapic
;
576 cpumask_var_t tmp_map
, new_map
;
579 int retval
= -ENOMEM
;
581 if (ACPI_FAILURE(acpi_evaluate_object(handle
, "_MAT", NULL
, &buffer
)))
584 if (!buffer
.length
|| !buffer
.pointer
)
587 obj
= buffer
.pointer
;
588 if (obj
->type
!= ACPI_TYPE_BUFFER
||
589 obj
->buffer
.length
< sizeof(*lapic
)) {
590 kfree(buffer
.pointer
);
594 lapic
= (struct acpi_madt_local_apic
*)obj
->buffer
.pointer
;
596 if (lapic
->header
.type
!= ACPI_MADT_TYPE_LOCAL_APIC
||
597 !(lapic
->lapic_flags
& ACPI_MADT_ENABLED
)) {
598 kfree(buffer
.pointer
);
604 kfree(buffer
.pointer
);
605 buffer
.length
= ACPI_ALLOCATE_BUFFER
;
606 buffer
.pointer
= NULL
;
608 if (!alloc_cpumask_var(&tmp_map
, GFP_KERNEL
))
611 if (!alloc_cpumask_var(&new_map
, GFP_KERNEL
))
614 cpumask_copy(tmp_map
, cpu_present_mask
);
615 acpi_register_lapic(physid
, lapic
->lapic_flags
& ACPI_MADT_ENABLED
);
618 * If mp_register_lapic successfully generates a new logical cpu
619 * number, then the following will get us exactly what was mapped
621 cpumask_andnot(new_map
, cpu_present_mask
, tmp_map
);
622 if (cpumask_empty(new_map
)) {
623 printk ("Unable to map lapic to logical cpu number\n");
628 acpi_processor_set_pdc(handle
);
630 cpu
= cpumask_first(new_map
);
631 acpi_map_cpu2node(handle
, cpu
, physid
);
637 free_cpumask_var(new_map
);
639 free_cpumask_var(tmp_map
);
644 /* wrapper to silence section mismatch warning */
645 int __ref
acpi_map_lsapic(acpi_handle handle
, int *pcpu
)
647 return _acpi_map_lsapic(handle
, pcpu
);
649 EXPORT_SYMBOL(acpi_map_lsapic
);
651 int acpi_unmap_lsapic(int cpu
)
653 per_cpu(x86_cpu_to_apicid
, cpu
) = -1;
654 set_cpu_present(cpu
, false);
660 EXPORT_SYMBOL(acpi_unmap_lsapic
);
661 #endif /* CONFIG_ACPI_HOTPLUG_CPU */
663 int acpi_register_ioapic(acpi_handle handle
, u64 phys_addr
, u32 gsi_base
)
669 EXPORT_SYMBOL(acpi_register_ioapic
);
671 int acpi_unregister_ioapic(acpi_handle handle
, u32 gsi_base
)
677 EXPORT_SYMBOL(acpi_unregister_ioapic
);
679 static int __init
acpi_parse_sbf(struct acpi_table_header
*table
)
681 struct acpi_table_boot
*sb
;
683 sb
= (struct acpi_table_boot
*)table
;
685 printk(KERN_WARNING PREFIX
"Unable to map SBF\n");
689 sbf_port
= sb
->cmos_index
; /* Save CMOS port */
694 #ifdef CONFIG_HPET_TIMER
695 #include <asm/hpet.h>
697 static struct __initdata resource
*hpet_res
;
699 static int __init
acpi_parse_hpet(struct acpi_table_header
*table
)
701 struct acpi_table_hpet
*hpet_tbl
;
703 hpet_tbl
= (struct acpi_table_hpet
*)table
;
705 printk(KERN_WARNING PREFIX
"Unable to map HPET\n");
709 if (hpet_tbl
->address
.space_id
!= ACPI_SPACE_MEM
) {
710 printk(KERN_WARNING PREFIX
"HPET timers must be located in "
715 hpet_address
= hpet_tbl
->address
.address
;
716 hpet_blockid
= hpet_tbl
->sequence
;
719 * Some broken BIOSes advertise HPET at 0x0. We really do not
720 * want to allocate a resource there.
723 printk(KERN_WARNING PREFIX
724 "HPET id: %#x base: %#lx is invalid\n",
725 hpet_tbl
->id
, hpet_address
);
730 * Some even more broken BIOSes advertise HPET at
731 * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
734 if (hpet_address
== 0xfed0000000000000UL
) {
735 if (!hpet_force_user
) {
736 printk(KERN_WARNING PREFIX
"HPET id: %#x "
737 "base: 0xfed0000000000000 is bogus\n "
738 "try hpet=force on the kernel command line to "
739 "fix it up to 0xfed00000.\n", hpet_tbl
->id
);
743 printk(KERN_WARNING PREFIX
744 "HPET id: %#x base: 0xfed0000000000000 fixed up "
745 "to 0xfed00000.\n", hpet_tbl
->id
);
749 printk(KERN_INFO PREFIX
"HPET id: %#x base: %#lx\n",
750 hpet_tbl
->id
, hpet_address
);
753 * Allocate and initialize the HPET firmware resource for adding into
754 * the resource tree during the lateinit timeframe.
756 #define HPET_RESOURCE_NAME_SIZE 9
757 hpet_res
= alloc_bootmem(sizeof(*hpet_res
) + HPET_RESOURCE_NAME_SIZE
);
759 hpet_res
->name
= (void *)&hpet_res
[1];
760 hpet_res
->flags
= IORESOURCE_MEM
;
761 snprintf((char *)hpet_res
->name
, HPET_RESOURCE_NAME_SIZE
, "HPET %u",
764 hpet_res
->start
= hpet_address
;
765 hpet_res
->end
= hpet_address
+ (1 * 1024) - 1;
771 * hpet_insert_resource inserts the HPET resources used into the resource
774 static __init
int hpet_insert_resource(void)
779 return insert_resource(&iomem_resource
, hpet_res
);
782 late_initcall(hpet_insert_resource
);
785 #define acpi_parse_hpet NULL
788 static int __init
acpi_parse_fadt(struct acpi_table_header
*table
)
791 #ifdef CONFIG_X86_PM_TIMER
792 /* detect the location of the ACPI PM Timer */
793 if (acpi_gbl_FADT
.header
.revision
>= FADT2_REVISION_ID
) {
795 if (acpi_gbl_FADT
.xpm_timer_block
.space_id
!=
796 ACPI_ADR_SPACE_SYSTEM_IO
)
799 pmtmr_ioport
= acpi_gbl_FADT
.xpm_timer_block
.address
;
801 * "X" fields are optional extensions to the original V1.0
802 * fields, so we must selectively expand V1.0 fields if the
803 * corresponding X field is zero.
806 pmtmr_ioport
= acpi_gbl_FADT
.pm_timer_block
;
809 pmtmr_ioport
= acpi_gbl_FADT
.pm_timer_block
;
812 printk(KERN_INFO PREFIX
"PM-Timer IO Port: %#x\n",
818 #ifdef CONFIG_X86_LOCAL_APIC
820 * Parse LAPIC entries in MADT
821 * returns 0 on success, < 0 on error
824 static void __init
acpi_register_lapic_address(unsigned long address
)
826 mp_lapic_addr
= address
;
828 set_fixmap_nocache(FIX_APIC_BASE
, address
);
829 if (boot_cpu_physical_apicid
== -1U) {
830 boot_cpu_physical_apicid
= read_apic_id();
831 apic_version
[boot_cpu_physical_apicid
] =
832 GET_APIC_VERSION(apic_read(APIC_LVR
));
836 static int __init
early_acpi_parse_madt_lapic_addr_ovr(void)
844 * Note that the LAPIC address is obtained from the MADT (32-bit value)
845 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
849 acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE
,
850 acpi_parse_lapic_addr_ovr
, 0);
852 printk(KERN_ERR PREFIX
853 "Error parsing LAPIC address override entry\n");
857 acpi_register_lapic_address(acpi_lapic_addr
);
862 static int __init
acpi_parse_madt_lapic_entries(void)
871 * Note that the LAPIC address is obtained from the MADT (32-bit value)
872 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
876 acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE
,
877 acpi_parse_lapic_addr_ovr
, 0);
879 printk(KERN_ERR PREFIX
880 "Error parsing LAPIC address override entry\n");
884 acpi_register_lapic_address(acpi_lapic_addr
);
886 count
= acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC
,
887 acpi_parse_sapic
, MAX_APICS
);
890 x2count
= acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC
,
891 acpi_parse_x2apic
, MAX_APICS
);
892 count
= acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC
,
893 acpi_parse_lapic
, MAX_APICS
);
895 if (!count
&& !x2count
) {
896 printk(KERN_ERR PREFIX
"No LAPIC entries present\n");
897 /* TBD: Cleanup to allow fallback to MPS */
899 } else if (count
< 0 || x2count
< 0) {
900 printk(KERN_ERR PREFIX
"Error parsing LAPIC entry\n");
901 /* TBD: Cleanup to allow fallback to MPS */
906 acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC_NMI
,
907 acpi_parse_x2apic_nmi
, 0);
909 acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI
, acpi_parse_lapic_nmi
, 0);
910 if (count
< 0 || x2count
< 0) {
911 printk(KERN_ERR PREFIX
"Error parsing LAPIC NMI entry\n");
912 /* TBD: Cleanup to allow fallback to MPS */
917 #endif /* CONFIG_X86_LOCAL_APIC */
919 #ifdef CONFIG_X86_IO_APIC
922 #ifdef CONFIG_X86_ES7000
923 extern int es7000_plat
;
926 static void assign_to_mp_irq(struct mpc_intsrc
*m
,
927 struct mpc_intsrc
*mp_irq
)
929 memcpy(mp_irq
, m
, sizeof(struct mpc_intsrc
));
932 static int mp_irq_cmp(struct mpc_intsrc
*mp_irq
,
933 struct mpc_intsrc
*m
)
935 return memcmp(mp_irq
, m
, sizeof(struct mpc_intsrc
));
938 static void save_mp_irq(struct mpc_intsrc
*m
)
942 for (i
= 0; i
< mp_irq_entries
; i
++) {
943 if (!mp_irq_cmp(&mp_irqs
[i
], m
))
947 assign_to_mp_irq(m
, &mp_irqs
[mp_irq_entries
]);
948 if (++mp_irq_entries
== MAX_IRQ_SOURCES
)
949 panic("Max # of irq sources exceeded!!\n");
952 void __init
mp_override_legacy_irq(u8 bus_irq
, u8 polarity
, u8 trigger
, u32 gsi
)
956 struct mpc_intsrc mp_irq
;
959 * Convert 'gsi' to 'ioapic.pin'.
961 ioapic
= mp_find_ioapic(gsi
);
964 pin
= mp_find_ioapic_pin(ioapic
, gsi
);
967 * TBD: This check is for faulty timer entries, where the override
968 * erroneously sets the trigger to level, resulting in a HUGE
969 * increase of timer interrupts!
971 if ((bus_irq
== 0) && (trigger
== 3))
974 mp_irq
.type
= MP_INTSRC
;
975 mp_irq
.irqtype
= mp_INT
;
976 mp_irq
.irqflag
= (trigger
<< 2) | polarity
;
977 mp_irq
.srcbus
= MP_ISA_BUS
;
978 mp_irq
.srcbusirq
= bus_irq
; /* IRQ */
979 mp_irq
.dstapic
= mp_ioapics
[ioapic
].apicid
; /* APIC ID */
980 mp_irq
.dstirq
= pin
; /* INTIN# */
982 save_mp_irq(&mp_irq
);
984 isa_irq_to_gsi
[bus_irq
] = gsi
;
987 void __init
mp_config_acpi_legacy_irqs(void)
990 struct mpc_intsrc mp_irq
;
992 #if defined (CONFIG_MCA) || defined (CONFIG_EISA)
994 * Fabricate the legacy ISA bus (bus #31).
996 mp_bus_id_to_type
[MP_ISA_BUS
] = MP_BUS_ISA
;
998 set_bit(MP_ISA_BUS
, mp_bus_not_pci
);
999 pr_debug("Bus #%d is ISA\n", MP_ISA_BUS
);
1001 #ifdef CONFIG_X86_ES7000
1003 * Older generations of ES7000 have no legacy identity mappings
1005 if (es7000_plat
== 1)
1010 * Use the default configuration for the IRQs 0-15. Unless
1011 * overridden by (MADT) interrupt source override entries.
1013 for (i
= 0; i
< 16; i
++) {
1015 unsigned int dstapic
;
1019 /* Locate the gsi that irq i maps to. */
1020 if (acpi_isa_irq_to_gsi(i
, &gsi
))
1024 * Locate the IOAPIC that manages the ISA IRQ.
1026 ioapic
= mp_find_ioapic(gsi
);
1029 pin
= mp_find_ioapic_pin(ioapic
, gsi
);
1030 dstapic
= mp_ioapics
[ioapic
].apicid
;
1032 for (idx
= 0; idx
< mp_irq_entries
; idx
++) {
1033 struct mpc_intsrc
*irq
= mp_irqs
+ idx
;
1035 /* Do we already have a mapping for this ISA IRQ? */
1036 if (irq
->srcbus
== MP_ISA_BUS
&& irq
->srcbusirq
== i
)
1039 /* Do we already have a mapping for this IOAPIC pin */
1040 if (irq
->dstapic
== dstapic
&& irq
->dstirq
== pin
)
1044 if (idx
!= mp_irq_entries
) {
1045 printk(KERN_DEBUG
"ACPI: IRQ%d used by override.\n", i
);
1046 continue; /* IRQ already used */
1049 mp_irq
.type
= MP_INTSRC
;
1050 mp_irq
.irqflag
= 0; /* Conforming */
1051 mp_irq
.srcbus
= MP_ISA_BUS
;
1052 mp_irq
.dstapic
= dstapic
;
1053 mp_irq
.irqtype
= mp_INT
;
1054 mp_irq
.srcbusirq
= i
; /* Identity mapped */
1055 mp_irq
.dstirq
= pin
;
1057 save_mp_irq(&mp_irq
);
1061 static int mp_config_acpi_gsi(struct device
*dev
, u32 gsi
, int trigger
,
1064 #ifdef CONFIG_X86_MPPARSE
1065 struct mpc_intsrc mp_irq
;
1066 struct pci_dev
*pdev
;
1067 unsigned char number
;
1076 if (dev
->bus
!= &pci_bus_type
)
1079 pdev
= to_pci_dev(dev
);
1080 number
= pdev
->bus
->number
;
1081 devfn
= pdev
->devfn
;
1083 /* print the entry should happen on mptable identically */
1084 mp_irq
.type
= MP_INTSRC
;
1085 mp_irq
.irqtype
= mp_INT
;
1086 mp_irq
.irqflag
= (trigger
== ACPI_EDGE_SENSITIVE
? 4 : 0x0c) |
1087 (polarity
== ACPI_ACTIVE_HIGH
? 1 : 3);
1088 mp_irq
.srcbus
= number
;
1089 mp_irq
.srcbusirq
= (((devfn
>> 3) & 0x1f) << 2) | ((pin
- 1) & 3);
1090 ioapic
= mp_find_ioapic(gsi
);
1091 mp_irq
.dstapic
= mp_ioapics
[ioapic
].apicid
;
1092 mp_irq
.dstirq
= mp_find_ioapic_pin(ioapic
, gsi
);
1094 save_mp_irq(&mp_irq
);
1099 int mp_register_gsi(struct device
*dev
, u32 gsi
, int trigger
, int polarity
)
1103 struct io_apic_irq_attr irq_attr
;
1105 if (acpi_irq_model
!= ACPI_IRQ_MODEL_IOAPIC
)
1108 /* Don't set up the ACPI SCI because it's already set up */
1109 if (acpi_gbl_FADT
.sci_interrupt
== gsi
)
1112 ioapic
= mp_find_ioapic(gsi
);
1114 printk(KERN_WARNING
"No IOAPIC for GSI %u\n", gsi
);
1118 ioapic_pin
= mp_find_ioapic_pin(ioapic
, gsi
);
1120 if (ioapic_pin
> MP_MAX_IOAPIC_PIN
) {
1121 printk(KERN_ERR
"Invalid reference to IOAPIC pin "
1122 "%d-%d\n", mp_ioapics
[ioapic
].apicid
,
1127 if (enable_update_mptable
)
1128 mp_config_acpi_gsi(dev
, gsi
, trigger
, polarity
);
1130 set_io_apic_irq_attr(&irq_attr
, ioapic
, ioapic_pin
,
1131 trigger
== ACPI_EDGE_SENSITIVE
? 0 : 1,
1132 polarity
== ACPI_ACTIVE_HIGH
? 0 : 1);
1133 io_apic_set_pci_routing(dev
, gsi_to_irq(gsi
), &irq_attr
);
1139 * Parse IOAPIC related entries in MADT
1140 * returns 0 on success, < 0 on error
1142 static int __init
acpi_parse_madt_ioapic_entries(void)
1147 * ACPI interpreter is required to complete interrupt setup,
1148 * so if it is off, don't enumerate the io-apics with ACPI.
1149 * If MPS is present, it will handle them,
1150 * otherwise the system will stay in PIC mode
1152 if (acpi_disabled
|| acpi_noirq
)
1159 * if "noapic" boot option, don't look for IO-APICs
1161 if (skip_ioapic_setup
) {
1162 printk(KERN_INFO PREFIX
"Skipping IOAPIC probe "
1163 "due to 'noapic' option.\n");
1168 acpi_table_parse_madt(ACPI_MADT_TYPE_IO_APIC
, acpi_parse_ioapic
,
1171 printk(KERN_ERR PREFIX
"No IOAPIC entries present\n");
1173 } else if (count
< 0) {
1174 printk(KERN_ERR PREFIX
"Error parsing IOAPIC entry\n");
1179 acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE
, acpi_parse_int_src_ovr
,
1182 printk(KERN_ERR PREFIX
1183 "Error parsing interrupt source overrides entry\n");
1184 /* TBD: Cleanup to allow fallback to MPS */
1189 * If BIOS did not supply an INT_SRC_OVR for the SCI
1190 * pretend we got one so we can set the SCI flags.
1192 if (!acpi_sci_override_gsi
)
1193 acpi_sci_ioapic_setup(acpi_gbl_FADT
.sci_interrupt
, 0, 0,
1194 acpi_gbl_FADT
.sci_interrupt
);
1196 /* Fill in identity legacy mappings where no override */
1197 mp_config_acpi_legacy_irqs();
1200 acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE
, acpi_parse_nmi_src
,
1203 printk(KERN_ERR PREFIX
"Error parsing NMI SRC entry\n");
1204 /* TBD: Cleanup to allow fallback to MPS */
1211 static inline int acpi_parse_madt_ioapic_entries(void)
1215 #endif /* !CONFIG_X86_IO_APIC */
1217 static void __init
early_acpi_process_madt(void)
1219 #ifdef CONFIG_X86_LOCAL_APIC
1222 if (!acpi_table_parse(ACPI_SIG_MADT
, acpi_parse_madt
)) {
1225 * Parse MADT LAPIC entries
1227 error
= early_acpi_parse_madt_lapic_addr_ovr();
1230 smp_found_config
= 1;
1232 if (error
== -EINVAL
) {
1234 * Dell Precision Workstation 410, 610 come here.
1236 printk(KERN_ERR PREFIX
1237 "Invalid BIOS MADT, disabling ACPI\n");
1244 static void __init
acpi_process_madt(void)
1246 #ifdef CONFIG_X86_LOCAL_APIC
1249 if (!acpi_table_parse(ACPI_SIG_MADT
, acpi_parse_madt
)) {
1252 * Parse MADT LAPIC entries
1254 error
= acpi_parse_madt_lapic_entries();
1259 * Parse MADT IO-APIC entries
1261 error
= acpi_parse_madt_ioapic_entries();
1263 acpi_irq_model
= ACPI_IRQ_MODEL_IOAPIC
;
1266 smp_found_config
= 1;
1269 if (error
== -EINVAL
) {
1271 * Dell Precision Workstation 410, 610 come here.
1273 printk(KERN_ERR PREFIX
1274 "Invalid BIOS MADT, disabling ACPI\n");
1279 * ACPI found no MADT, and so ACPI wants UP PIC mode.
1280 * In the event an MPS table was found, forget it.
1281 * Boot with "acpi=off" to use MPS on such a system.
1283 if (smp_found_config
) {
1284 printk(KERN_WARNING PREFIX
1285 "No APIC-table, disabling MPS\n");
1286 smp_found_config
= 0;
1291 * ACPI supports both logical (e.g. Hyper-Threading) and physical
1292 * processors, where MPS only supports physical.
1294 if (acpi_lapic
&& acpi_ioapic
)
1295 printk(KERN_INFO
"Using ACPI (MADT) for SMP configuration "
1297 else if (acpi_lapic
)
1298 printk(KERN_INFO
"Using ACPI for processor (LAPIC) "
1299 "configuration information\n");
1304 static int __init
disable_acpi_irq(const struct dmi_system_id
*d
)
1307 printk(KERN_NOTICE
"%s detected: force use of acpi=noirq\n",
1314 static int __init
disable_acpi_pci(const struct dmi_system_id
*d
)
1317 printk(KERN_NOTICE
"%s detected: force use of pci=noacpi\n",
1324 static int __init
dmi_disable_acpi(const struct dmi_system_id
*d
)
1327 printk(KERN_NOTICE
"%s detected: acpi off\n", d
->ident
);
1331 "Warning: DMI blacklist says broken, but acpi forced\n");
1337 * Force ignoring BIOS IRQ0 pin2 override
1339 static int __init
dmi_ignore_irq0_timer_override(const struct dmi_system_id
*d
)
1342 * The ati_ixp4x0_rev() early PCI quirk should have set
1343 * the acpi_skip_timer_override flag already:
1345 if (!acpi_skip_timer_override
) {
1346 WARN(1, KERN_ERR
"ati_ixp4x0 quirk not complete.\n");
1347 pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
1349 acpi_skip_timer_override
= 1;
1355 * If your system is blacklisted here, but you find that acpi=force
1356 * works for you, please contact linux-acpi@vger.kernel.org
1358 static struct dmi_system_id __initdata acpi_dmi_table
[] = {
1360 * Boxes that need ACPI disabled
1363 .callback
= dmi_disable_acpi
,
1364 .ident
= "IBM Thinkpad",
1366 DMI_MATCH(DMI_BOARD_VENDOR
, "IBM"),
1367 DMI_MATCH(DMI_BOARD_NAME
, "2629H1G"),
1372 * Boxes that need ACPI PCI IRQ routing disabled
1375 .callback
= disable_acpi_irq
,
1376 .ident
= "ASUS A7V",
1378 DMI_MATCH(DMI_BOARD_VENDOR
, "ASUSTeK Computer INC"),
1379 DMI_MATCH(DMI_BOARD_NAME
, "<A7V>"),
1380 /* newer BIOS, Revision 1011, does work */
1381 DMI_MATCH(DMI_BIOS_VERSION
,
1382 "ASUS A7V ACPI BIOS Revision 1007"),
1387 * Latest BIOS for IBM 600E (1.16) has bad pcinum
1388 * for LPC bridge, which is needed for the PCI
1389 * interrupt links to work. DSDT fix is in bug 5966.
1390 * 2645, 2646 model numbers are shared with 600/600E/600X
1392 .callback
= disable_acpi_irq
,
1393 .ident
= "IBM Thinkpad 600 Series 2645",
1395 DMI_MATCH(DMI_BOARD_VENDOR
, "IBM"),
1396 DMI_MATCH(DMI_BOARD_NAME
, "2645"),
1400 .callback
= disable_acpi_irq
,
1401 .ident
= "IBM Thinkpad 600 Series 2646",
1403 DMI_MATCH(DMI_BOARD_VENDOR
, "IBM"),
1404 DMI_MATCH(DMI_BOARD_NAME
, "2646"),
1408 * Boxes that need ACPI PCI IRQ routing and PCI scan disabled
1411 .callback
= disable_acpi_pci
,
1412 .ident
= "ASUS PR-DLS",
1414 DMI_MATCH(DMI_BOARD_VENDOR
, "ASUSTeK Computer INC."),
1415 DMI_MATCH(DMI_BOARD_NAME
, "PR-DLS"),
1416 DMI_MATCH(DMI_BIOS_VERSION
,
1417 "ASUS PR-DLS ACPI BIOS Revision 1010"),
1418 DMI_MATCH(DMI_BIOS_DATE
, "03/21/2003")
1422 .callback
= disable_acpi_pci
,
1423 .ident
= "Acer TravelMate 36x Laptop",
1425 DMI_MATCH(DMI_SYS_VENDOR
, "Acer"),
1426 DMI_MATCH(DMI_PRODUCT_NAME
, "TravelMate 360"),
1432 /* second table for DMI checks that should run after early-quirks */
1433 static struct dmi_system_id __initdata acpi_dmi_table_late
[] = {
1435 * HP laptops which use a DSDT reporting as HP/SB400/10000,
1436 * which includes some code which overrides all temperature
1437 * trip points to 16C if the INTIN2 input of the I/O APIC
1438 * is enabled. This input is incorrectly designated the
1439 * ISA IRQ 0 via an interrupt source override even though
1440 * it is wired to the output of the master 8259A and INTIN0
1441 * is not connected at all. Force ignoring BIOS IRQ0 pin2
1442 * override in that cases.
1445 .callback
= dmi_ignore_irq0_timer_override
,
1446 .ident
= "HP nx6115 laptop",
1448 DMI_MATCH(DMI_SYS_VENDOR
, "Hewlett-Packard"),
1449 DMI_MATCH(DMI_PRODUCT_NAME
, "HP Compaq nx6115"),
1453 .callback
= dmi_ignore_irq0_timer_override
,
1454 .ident
= "HP NX6125 laptop",
1456 DMI_MATCH(DMI_SYS_VENDOR
, "Hewlett-Packard"),
1457 DMI_MATCH(DMI_PRODUCT_NAME
, "HP Compaq nx6125"),
1461 .callback
= dmi_ignore_irq0_timer_override
,
1462 .ident
= "HP NX6325 laptop",
1464 DMI_MATCH(DMI_SYS_VENDOR
, "Hewlett-Packard"),
1465 DMI_MATCH(DMI_PRODUCT_NAME
, "HP Compaq nx6325"),
1469 .callback
= dmi_ignore_irq0_timer_override
,
1470 .ident
= "HP 6715b laptop",
1472 DMI_MATCH(DMI_SYS_VENDOR
, "Hewlett-Packard"),
1473 DMI_MATCH(DMI_PRODUCT_NAME
, "HP Compaq 6715b"),
1480 * acpi_boot_table_init() and acpi_boot_init()
1481 * called from setup_arch(), always.
1482 * 1. checksums all tables
1483 * 2. enumerates lapics
1484 * 3. enumerates io-apics
1486 * acpi_table_init() is separate to allow reading SRAT without
1487 * other side effects.
1489 * side effects of acpi_boot_init:
1490 * acpi_lapic = 1 if LAPIC found
1491 * acpi_ioapic = 1 if IOAPIC found
1492 * if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
1493 * if acpi_blacklisted() acpi_disabled = 1;
1494 * acpi_irq_model=...
1498 void __init
acpi_boot_table_init(void)
1500 dmi_check_system(acpi_dmi_table
);
1503 * If acpi_disabled, bail out
1504 * One exception: acpi=ht continues far enough to enumerate LAPICs
1506 if (acpi_disabled
&& !acpi_ht
)
1510 * Initialize the ACPI boot-time table parser.
1512 if (acpi_table_init()) {
1517 acpi_table_parse(ACPI_SIG_BOOT
, acpi_parse_sbf
);
1520 * blacklist may disable ACPI entirely
1522 if (acpi_blacklisted()) {
1524 printk(KERN_WARNING PREFIX
"acpi=force override\n");
1526 printk(KERN_WARNING PREFIX
"Disabling ACPI support\n");
1533 int __init
early_acpi_boot_init(void)
1536 * If acpi_disabled, bail out
1537 * One exception: acpi=ht continues far enough to enumerate LAPICs
1539 if (acpi_disabled
&& !acpi_ht
)
1543 * Process the Multiple APIC Description Table (MADT), if present
1545 early_acpi_process_madt();
1550 int __init
acpi_boot_init(void)
1552 /* those are executed after early-quirks are executed */
1553 dmi_check_system(acpi_dmi_table_late
);
1556 * If acpi_disabled, bail out
1557 * One exception: acpi=ht continues far enough to enumerate LAPICs
1559 if (acpi_disabled
&& !acpi_ht
)
1562 acpi_table_parse(ACPI_SIG_BOOT
, acpi_parse_sbf
);
1565 * set sci_int and PM timer address
1567 acpi_table_parse(ACPI_SIG_FADT
, acpi_parse_fadt
);
1570 * Process the Multiple APIC Description Table (MADT), if present
1572 acpi_process_madt();
1574 acpi_table_parse(ACPI_SIG_HPET
, acpi_parse_hpet
);
1577 x86_init
.pci
.init
= pci_acpi_init
;
1582 static int __init
parse_acpi(char *arg
)
1587 /* "acpi=off" disables both ACPI table parsing and interpreter */
1588 if (strcmp(arg
, "off") == 0) {
1591 /* acpi=force to over-ride black-list */
1592 else if (strcmp(arg
, "force") == 0) {
1597 /* acpi=strict disables out-of-spec workarounds */
1598 else if (strcmp(arg
, "strict") == 0) {
1601 /* Limit ACPI just to boot-time to enable HT */
1602 else if (strcmp(arg
, "ht") == 0) {
1604 printk(KERN_WARNING
"acpi=ht will be removed in Linux-2.6.35\n");
1609 /* acpi=rsdt use RSDT instead of XSDT */
1610 else if (strcmp(arg
, "rsdt") == 0) {
1611 acpi_rsdt_forced
= 1;
1613 /* "acpi=noirq" disables ACPI interrupt routing */
1614 else if (strcmp(arg
, "noirq") == 0) {
1617 /* Core will printk when we return error. */
1622 early_param("acpi", parse_acpi
);
1624 /* FIXME: Using pci= for an ACPI parameter is a travesty. */
1625 static int __init
parse_pci(char *arg
)
1627 if (arg
&& strcmp(arg
, "noacpi") == 0)
1631 early_param("pci", parse_pci
);
1633 int __init
acpi_mps_check(void)
1635 #if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_MPPARSE)
1636 /* mptable code is not built-in*/
1637 if (acpi_disabled
|| acpi_noirq
) {
1638 printk(KERN_WARNING
"MPS support code is not built-in.\n"
1639 "Using acpi=off or acpi=noirq or pci=noacpi "
1640 "may have problem\n");
1647 #ifdef CONFIG_X86_IO_APIC
1648 static int __init
parse_acpi_skip_timer_override(char *arg
)
1650 acpi_skip_timer_override
= 1;
1653 early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override
);
1655 static int __init
parse_acpi_use_timer_override(char *arg
)
1657 acpi_use_timer_override
= 1;
1660 early_param("acpi_use_timer_override", parse_acpi_use_timer_override
);
1661 #endif /* CONFIG_X86_IO_APIC */
1663 static int __init
setup_acpi_sci(char *s
)
1667 if (!strcmp(s
, "edge"))
1668 acpi_sci_flags
= ACPI_MADT_TRIGGER_EDGE
|
1669 (acpi_sci_flags
& ~ACPI_MADT_TRIGGER_MASK
);
1670 else if (!strcmp(s
, "level"))
1671 acpi_sci_flags
= ACPI_MADT_TRIGGER_LEVEL
|
1672 (acpi_sci_flags
& ~ACPI_MADT_TRIGGER_MASK
);
1673 else if (!strcmp(s
, "high"))
1674 acpi_sci_flags
= ACPI_MADT_POLARITY_ACTIVE_HIGH
|
1675 (acpi_sci_flags
& ~ACPI_MADT_POLARITY_MASK
);
1676 else if (!strcmp(s
, "low"))
1677 acpi_sci_flags
= ACPI_MADT_POLARITY_ACTIVE_LOW
|
1678 (acpi_sci_flags
& ~ACPI_MADT_POLARITY_MASK
);
1683 early_param("acpi_sci", setup_acpi_sci
);
1685 int __acpi_acquire_global_lock(unsigned int *lock
)
1687 unsigned int old
, new, val
;
1690 new = (((old
& ~0x3) + 2) + ((old
>> 1) & 0x1));
1691 val
= cmpxchg(lock
, old
, new);
1692 } while (unlikely (val
!= old
));
1693 return (new < 3) ? -1 : 0;
1696 int __acpi_release_global_lock(unsigned int *lock
)
1698 unsigned int old
, new, val
;
1702 val
= cmpxchg(lock
, old
, new);
1703 } while (unlikely (val
!= old
));