drivers/scsi/pmcraid.h

   1 /*
   2  * pmcraid.h -- PMC Sierra MaxRAID controller driver header file
   3  *
   4  * Written By: Anil Ravindranath<anil_ravindranath@pmc-sierra.com>
   5  *             PMC-Sierra Inc
   6  *
   7  * Copyright (C) 2008, 2009 PMC Sierra Inc.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  22  */
  23
  24 #ifndef _PMCRAID_H
  25 #define _PMCRAID_H
  26
  27 #include <linux/version.h>
  28 #include <linux/types.h>
  29 #include <linux/completion.h>
  30 #include <linux/list.h>
  31 #include <scsi/scsi.h>
  32 #include <scsi/scsi_cmnd.h>
  33 #include <linux/cdev.h>
  34 #include <net/netlink.h>
  35 #include <net/genetlink.h>
  36 #include <linux/connector.h>
  37 /*
  38  * Driver name   : string representing the driver name
  39  * Device file   : /dev file to be used for management interfaces
  40  * Driver version: version string in major_version.minor_version.patch format
  41  * Driver date   : date information in "Mon dd yyyy" format
  42  */
  43 #define PMCRAID_DRIVER_NAME             "PMC MaxRAID"
  44 #define PMCRAID_DEVFILE                 "pmcsas"
  45 #define PMCRAID_DRIVER_VERSION          "1.0.2"
  46 #define PMCRAID_DRIVER_DATE             __DATE__
  47
  48 /* Maximum number of adapters supported by current version of the driver */
  49 #define PMCRAID_MAX_ADAPTERS            1024
  50
  51 /* Bit definitions as per firmware, bit position [0][1][2].....[31] */
  52 #define PMC_BIT8(n)          (1 << (7-n))
  53 #define PMC_BIT16(n)         (1 << (15-n))
  54 #define PMC_BIT32(n)         (1 << (31-n))
  55
  56 /* PMC PCI vendor ID and device ID values */
  57 #define PCI_VENDOR_ID_PMC                       0x11F8
  58 #define PCI_DEVICE_ID_PMC_MAXRAID               0x5220
  59
  60 /*
  61  * MAX_CMD          : maximum commands that can be outstanding with IOA
  62  * MAX_IO_CMD       : command blocks available for IO commands
  63  * MAX_HCAM_CMD     : command blocks avaibale for HCAMS
  64  * MAX_INTERNAL_CMD : command blocks avaible for internal commands like reset
  65  */
  66 #define PMCRAID_MAX_CMD                         1024
  67 #define PMCRAID_MAX_IO_CMD                      1020
  68 #define PMCRAID_MAX_HCAM_CMD                    2
  69 #define PMCRAID_MAX_INTERNAL_CMD                2
  70
  71 /* MAX_IOADLS       : max number of scatter-gather lists supported by IOA
  72  * IOADLS_INTERNAL  : number of ioadls included as part of IOARCB.
  73  * IOADLS_EXTERNAL  : number of ioadls allocated external to IOARCB
  74  */
  75 #define PMCRAID_IOADLS_INTERNAL                  27
  76 #define PMCRAID_IOADLS_EXTERNAL                  37
  77 #define PMCRAID_MAX_IOADLS                       PMCRAID_IOADLS_INTERNAL
  78
  79 /* HRRQ_ENTRY_SIZE  : size of hrrq buffer
  80  * IOARCB_ALIGNMENT : alignment required for IOARCB
  81  * IOADL_ALIGNMENT  : alignment requirement for IOADLs
  82  * MSIX_VECTORS     : number of MSIX vectors supported
  83  */
  84 #define HRRQ_ENTRY_SIZE                          sizeof(__le32)
  85 #define PMCRAID_IOARCB_ALIGNMENT                 32
  86 #define PMCRAID_IOADL_ALIGNMENT                  16
  87 #define PMCRAID_IOASA_ALIGNMENT                  4
  88 #define PMCRAID_NUM_MSIX_VECTORS                 1
  89
  90 /* various other limits */
  91 #define PMCRAID_VENDOR_ID_LEN                    8
  92 #define PMCRAID_PRODUCT_ID_LEN                   16
  93 #define PMCRAID_SERIAL_NUM_LEN                   8
  94 #define PMCRAID_LUN_LEN                          8
  95 #define PMCRAID_MAX_CDB_LEN                      16
  96 #define PMCRAID_DEVICE_ID_LEN                    8
  97 #define PMCRAID_SENSE_DATA_LEN                   256
  98 #define PMCRAID_ADD_CMD_PARAM_LEN                48
  99
 100 #define PMCRAID_MAX_BUS_TO_SCAN                  1
 101 #define PMCRAID_MAX_NUM_TARGETS_PER_BUS          256
 102 #define PMCRAID_MAX_NUM_LUNS_PER_TARGET          8
 103
 104 /* IOA bus/target/lun number of IOA resources */
 105 #define PMCRAID_IOA_BUS_ID                       0xfe
 106 #define PMCRAID_IOA_TARGET_ID                    0xff
 107 #define PMCRAID_IOA_LUN_ID                       0xff
 108 #define PMCRAID_VSET_BUS_ID                      0x1
 109 #define PMCRAID_VSET_LUN_ID                      0x0
 110 #define PMCRAID_PHYS_BUS_ID                      0x0
 111 #define PMCRAID_VIRTUAL_ENCL_BUS_ID              0x8
 112 #define PMCRAID_MAX_VSET_TARGETS                 0x7F
 113 #define PMCRAID_MAX_VSET_LUNS_PER_TARGET         8
 114
 115 #define PMCRAID_IOA_MAX_SECTORS                  32767
 116 #define PMCRAID_VSET_MAX_SECTORS                 512
 117 #define PMCRAID_MAX_CMD_PER_LUN                  254
 118
 119 /* Number of configuration table entries (resources) */
 120 #define PMCRAID_MAX_NUM_OF_VSETS                 240
 121
 122 /* Todo : Check max limit for Phase 1 */
 123 #define PMCRAID_MAX_NUM_OF_PHY_DEVS              256
 124
 125 /* MAX_NUM_OF_DEVS includes 1 FP, 1 Dummy Enclosure device */
 126 #define PMCRAID_MAX_NUM_OF_DEVS                        \
 127     (PMCRAID_MAX_NUM_OF_VSETS + PMCRAID_MAX_NUM_OF_PHY_DEVS + 2)
 128
 129 #define PMCRAID_MAX_RESOURCES                    PMCRAID_MAX_NUM_OF_DEVS
 130
 131 /* Adapter Commands used by driver */
 132 #define PMCRAID_QUERY_RESOURCE_STATE             0xC2
 133 #define PMCRAID_RESET_DEVICE                     0xC3
 134 /* options to select reset target */
 135 #define ENABLE_RESET_MODIFIER                    0x80
 136 #define RESET_DEVICE_LUN                         0x40
 137 #define RESET_DEVICE_TARGET                      0x20
 138 #define RESET_DEVICE_BUS                         0x10
 139
 140 #define PMCRAID_IDENTIFY_HRRQ                    0xC4
 141 #define PMCRAID_QUERY_IOA_CONFIG                 0xC5
 142 #define PMCRAID_QUERY_CMD_STATUS                 0xCB
 143 #define PMCRAID_ABORT_CMD                        0xC7
 144
 145 /* CANCEL ALL command, provides option for setting SYNC_COMPLETE
 146  * on the target resources for which commands got cancelled
 147  */
 148 #define PMCRAID_CANCEL_ALL_REQUESTS              0xCE
 149 #define PMCRAID_SYNC_COMPLETE_AFTER_CANCEL       PMC_BIT8(0)
 150
 151 /* HCAM command and types of HCAM supported by IOA */
 152 #define PMCRAID_HOST_CONTROLLED_ASYNC            0xCF
 153 #define PMCRAID_HCAM_CODE_CONFIG_CHANGE          0x01
 154 #define PMCRAID_HCAM_CODE_LOG_DATA               0x02
 155
 156 /* IOA shutdown command and various shutdown types */
 157 #define PMCRAID_IOA_SHUTDOWN                     0xF7
 158 #define PMCRAID_SHUTDOWN_NORMAL                  0x00
 159 #define PMCRAID_SHUTDOWN_PREPARE_FOR_NORMAL      0x40
 160 #define PMCRAID_SHUTDOWN_NONE                    0x100
 161 #define PMCRAID_SHUTDOWN_ABBREV                  0x80
 162
 163 /* SET SUPPORTED DEVICES command and the option to select all the
 164  * devices to be supported
 165  */
 166 #define PMCRAID_SET_SUPPORTED_DEVICES            0xFB
 167 #define ALL_DEVICES_SUPPORTED                    PMC_BIT8(0)
 168
 169 /* This option is used with SCSI WRITE_BUFFER command */
 170 #define PMCRAID_WR_BUF_DOWNLOAD_AND_SAVE         0x05
 171
 172 /* IOASC Codes used by driver */
 173 #define PMCRAID_IOASC_SENSE_MASK                 0xFFFFFF00
 174 #define PMCRAID_IOASC_SENSE_KEY(ioasc)           ((ioasc) >> 24)
 175 #define PMCRAID_IOASC_SENSE_CODE(ioasc)          (((ioasc) & 0x00ff0000) >> 16)
 176 #define PMCRAID_IOASC_SENSE_QUAL(ioasc)          (((ioasc) & 0x0000ff00) >> 8)
 177 #define PMCRAID_IOASC_SENSE_STATUS(ioasc)        ((ioasc) & 0x000000ff)
 178
 179 #define PMCRAID_IOASC_GOOD_COMPLETION                   0x00000000
 180 #define PMCRAID_IOASC_NR_INIT_CMD_REQUIRED              0x02040200
 181 #define PMCRAID_IOASC_NR_IOA_RESET_REQUIRED             0x02048000
 182 #define PMCRAID_IOASC_NR_SYNC_REQUIRED                  0x023F0000
 183 #define PMCRAID_IOASC_ME_READ_ERROR_NO_REALLOC          0x03110C00
 184 #define PMCRAID_IOASC_HW_CANNOT_COMMUNICATE             0x04050000
 185 #define PMCRAID_IOASC_HW_DEVICE_TIMEOUT                 0x04080100
 186 #define PMCRAID_IOASC_HW_DEVICE_BUS_STATUS_ERROR        0x04448500
 187 #define PMCRAID_IOASC_HW_IOA_RESET_REQUIRED             0x04448600
 188 #define PMCRAID_IOASC_IR_INVALID_RESOURCE_HANDLE        0x05250000
 189 #define PMCRAID_IOASC_AC_TERMINATED_BY_HOST             0x0B5A0000
 190 #define PMCRAID_IOASC_UA_BUS_WAS_RESET                  0x06290000
 191 #define PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER         0x06298000
 192
 193 /* Driver defined IOASCs */
 194 #define PMCRAID_IOASC_IOA_WAS_RESET                     0x10000001
 195 #define PMCRAID_IOASC_PCI_ACCESS_ERROR                  0x10000002
 196
 197 /* Various timeout values (in milliseconds) used. If any of these are chip
 198  * specific, move them to pmcraid_chip_details structure.
 199  */
 200 #define PMCRAID_PCI_DEASSERT_TIMEOUT            2000
 201 #define PMCRAID_BIST_TIMEOUT                    2000
 202 #define PMCRAID_AENWAIT_TIMEOUT                 5000
 203 #define PMCRAID_TRANSOP_TIMEOUT                 60000
 204
 205 #define PMCRAID_RESET_TIMEOUT                   (2 * HZ)
 206 #define PMCRAID_CHECK_FOR_RESET_TIMEOUT         ((HZ / 10))
 207 #define PMCRAID_VSET_IO_TIMEOUT                 (60 * HZ)
 208 #define PMCRAID_INTERNAL_TIMEOUT                (60 * HZ)
 209 #define PMCRAID_SHUTDOWN_TIMEOUT                (150 * HZ)
 210 #define PMCRAID_RESET_BUS_TIMEOUT               (60 * HZ)
 211 #define PMCRAID_RESET_HOST_TIMEOUT              (150 * HZ)
 212 #define PMCRAID_REQUEST_SENSE_TIMEOUT           (30 * HZ)
 213 #define PMCRAID_SET_SUP_DEV_TIMEOUT             (2 * 60 * HZ)
 214
 215 /* structure to represent a scatter-gather element (IOADL descriptor) */
 216 struct pmcraid_ioadl_desc {
 217         __le64 address;
 218         __le32 data_len;
 219         __u8  reserved[3];
 220         __u8  flags;
 221 } __attribute__((packed, aligned(PMCRAID_IOADL_ALIGNMENT)));
 222
 223 /* pmcraid_ioadl_desc.flags values */
 224 #define IOADL_FLAGS_CHAINED      PMC_BIT8(0)
 225 #define IOADL_FLAGS_LAST_DESC    PMC_BIT8(1)
 226 #define IOADL_FLAGS_READ_LAST    PMC_BIT8(1)
 227 #define IOADL_FLAGS_WRITE_LAST   PMC_BIT8(1)
 228
 229
 230 /* additional IOARCB data which can be CDB or additional request parameters
 231  * or list of IOADLs. Firmware supports max of 512 bytes for IOARCB, hence then
 232  * number of IOADLs are limted to 27. In case they are more than 27, they will
 233  * be used in chained form
 234  */
 235 struct pmcraid_ioarcb_add_data {
 236         union {
 237                 struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_INTERNAL];
 238                 __u8 add_cmd_params[PMCRAID_ADD_CMD_PARAM_LEN];
 239         } u;
 240 };
 241
 242 /*
 243  * IOA Request Control Block
 244  */
 245 struct pmcraid_ioarcb {
 246         __le64 ioarcb_bus_addr;
 247         __le32 resource_handle;
 248         __le32 response_handle;
 249         __le64 ioadl_bus_addr;
 250         __le32 ioadl_length;
 251         __le32 data_transfer_length;
 252         __le64 ioasa_bus_addr;
 253         __le16 ioasa_len;
 254         __le16 cmd_timeout;
 255         __le16 add_cmd_param_offset;
 256         __le16 add_cmd_param_length;
 257         __le32 reserved1[2];
 258         __le32 reserved2;
 259         __u8  request_type;
 260         __u8  request_flags0;
 261         __u8  request_flags1;
 262         __u8  hrrq_id;
 263         __u8  cdb[PMCRAID_MAX_CDB_LEN];
 264         struct pmcraid_ioarcb_add_data add_data;
 265 } __attribute__((packed, aligned(PMCRAID_IOARCB_ALIGNMENT)));
 266
 267 /* well known resource handle values */
 268 #define PMCRAID_IOA_RES_HANDLE        0xffffffff
 269 #define PMCRAID_INVALID_RES_HANDLE    0
 270
 271 /* pmcraid_ioarcb.request_type values */
 272 #define REQ_TYPE_SCSI                 0x00
 273 #define REQ_TYPE_IOACMD               0x01
 274 #define REQ_TYPE_HCAM                 0x02
 275
 276 /* pmcraid_ioarcb.flags0 values */
 277 #define TRANSFER_DIR_WRITE            PMC_BIT8(0)
 278 #define INHIBIT_UL_CHECK              PMC_BIT8(2)
 279 #define SYNC_OVERRIDE                 PMC_BIT8(3)
 280 #define SYNC_COMPLETE                 PMC_BIT8(4)
 281 #define NO_LINK_DESCS                 PMC_BIT8(5)
 282
 283 /* pmcraid_ioarcb.flags1 values */
 284 #define DELAY_AFTER_RESET             PMC_BIT8(0)
 285 #define TASK_TAG_SIMPLE               0x10
 286 #define TASK_TAG_ORDERED              0x20
 287 #define TASK_TAG_QUEUE_HEAD           0x30
 288
 289 /* toggle bit offset in response handle */
 290 #define HRRQ_TOGGLE_BIT               0x01
 291 #define HRRQ_RESPONSE_BIT             0x02
 292
 293 /* IOA Status Area */
 294 struct pmcraid_ioasa_vset {
 295         __le32 failing_lba_hi;
 296         __le32 failing_lba_lo;
 297         __le32 reserved;
 298 } __attribute__((packed, aligned(4)));
 299
 300 struct pmcraid_ioasa {
 301         __le32 ioasc;
 302         __le16 returned_status_length;
 303         __le16 available_status_length;
 304         __le32 residual_data_length;
 305         __le32 ilid;
 306         __le32 fd_ioasc;
 307         __le32 fd_res_address;
 308         __le32 fd_res_handle;
 309         __le32 reserved;
 310
 311         /* resource specific sense information */
 312         union {
 313                 struct pmcraid_ioasa_vset vset;
 314         } u;
 315
 316         /* IOA autosense data */
 317         __le16 auto_sense_length;
 318         __le16 error_data_length;
 319         __u8  sense_data[PMCRAID_SENSE_DATA_LEN];
 320 } __attribute__((packed, aligned(4)));
 321
 322 #define PMCRAID_DRIVER_ILID           0xffffffff
 323
 324 /* Config Table Entry per Resource */
 325 struct pmcraid_config_table_entry {
 326         __u8  resource_type;
 327         __u8  bus_protocol;
 328         __le16 array_id;
 329         __u8  common_flags0;
 330         __u8  common_flags1;
 331         __u8  unique_flags0;
 332         __u8  unique_flags1;    /*also used as vset target_id */
 333         __le32 resource_handle;
 334         __le32 resource_address;
 335         __u8  device_id[PMCRAID_DEVICE_ID_LEN];
 336         __u8  lun[PMCRAID_LUN_LEN];
 337 } __attribute__((packed, aligned(4)));
 338
 339 /* resource types (config_table_entry.resource_type values) */
 340 #define RES_TYPE_AF_DASD     0x00
 341 #define RES_TYPE_GSCSI       0x01
 342 #define RES_TYPE_VSET        0x02
 343 #define RES_TYPE_IOA_FP      0xFF
 344
 345 #define RES_IS_IOA(res)      ((res).resource_type == RES_TYPE_IOA_FP)
 346 #define RES_IS_GSCSI(res)    ((res).resource_type == RES_TYPE_GSCSI)
 347 #define RES_IS_VSET(res)     ((res).resource_type == RES_TYPE_VSET)
 348 #define RES_IS_AFDASD(res)   ((res).resource_type == RES_TYPE_AF_DASD)
 349
 350 /* bus_protocol values used by driver */
 351 #define RES_TYPE_VENCLOSURE  0x8
 352
 353 /* config_table_entry.common_flags0 */
 354 #define MULTIPATH_RESOURCE   PMC_BIT32(0)
 355
 356 /* unique_flags1 */
 357 #define IMPORT_MODE_MANUAL   PMC_BIT8(0)
 358
 359 /* well known resource handle values */
 360 #define RES_HANDLE_IOA       0xFFFFFFFF
 361 #define RES_HANDLE_NONE      0x00000000
 362
 363 /* well known resource address values */
 364 #define RES_ADDRESS_IOAFP    0xFEFFFFFF
 365 #define RES_ADDRESS_INVALID  0xFFFFFFFF
 366
 367 /* BUS/TARGET/LUN values from resource_addrr */
 368 #define RES_BUS(res_addr)    (le32_to_cpu(res_addr) & 0xFF)
 369 #define RES_TARGET(res_addr) ((le32_to_cpu(res_addr) >> 16) & 0xFF)
 370 #define RES_LUN(res_addr)    0x0
 371
 372 /* configuration table structure */
 373 struct pmcraid_config_table {
 374         __le16 num_entries;
 375         __u8  table_format;
 376         __u8  reserved1;
 377         __u8  flags;
 378         __u8  reserved2[11];
 379         struct pmcraid_config_table_entry entries[PMCRAID_MAX_RESOURCES];
 380 } __attribute__((packed, aligned(4)));
 381
 382 /* config_table.flags value */
 383 #define MICROCODE_UPDATE_REQUIRED               PMC_BIT32(0)
 384
 385 /*
 386  * HCAM format
 387  */
 388 #define PMCRAID_HOSTRCB_LDNSIZE                 4056
 389
 390 /* Error log notification format */
 391 struct pmcraid_hostrcb_error {
 392         __le32 fd_ioasc;
 393         __le32 fd_ra;
 394         __le32 fd_rh;
 395         __le32 prc;
 396         union {
 397                 __u8 data[PMCRAID_HOSTRCB_LDNSIZE];
 398         } u;
 399 } __attribute__ ((packed, aligned(4)));
 400
 401 struct pmcraid_hcam_hdr {
 402         __u8  op_code;
 403         __u8  notification_type;
 404         __u8  notification_lost;
 405         __u8  flags;
 406         __u8  overlay_id;
 407         __u8  reserved1[3];
 408         __le32 ilid;
 409         __le32 timestamp1;
 410         __le32 timestamp2;
 411         __le32 data_len;
 412 } __attribute__((packed, aligned(4)));
 413
 414 #define PMCRAID_AEN_GROUP       0x3
 415
 416 struct pmcraid_hcam_ccn {
 417         struct pmcraid_hcam_hdr header;
 418         struct pmcraid_config_table_entry cfg_entry;
 419 } __attribute__((packed, aligned(4)));
 420
 421 struct pmcraid_hcam_ldn {
 422         struct pmcraid_hcam_hdr header;
 423         struct pmcraid_hostrcb_error error_log;
 424 } __attribute__((packed, aligned(4)));
 425
 426 /* pmcraid_hcam.op_code values */
 427 #define HOSTRCB_TYPE_CCN                        0xE1
 428 #define HOSTRCB_TYPE_LDN                        0xE2
 429
 430 /* pmcraid_hcam.notification_type values */
 431 #define NOTIFICATION_TYPE_ENTRY_CHANGED         0x0
 432 #define NOTIFICATION_TYPE_ENTRY_NEW             0x1
 433 #define NOTIFICATION_TYPE_ENTRY_DELETED         0x2
 434 #define NOTIFICATION_TYPE_ERROR_LOG             0x10
 435 #define NOTIFICATION_TYPE_INFORMATION_LOG       0x11
 436
 437 #define HOSTRCB_NOTIFICATIONS_LOST              PMC_BIT8(0)
 438
 439 /* pmcraid_hcam.flags values */
 440 #define HOSTRCB_INTERNAL_OP_ERROR               PMC_BIT8(0)
 441 #define HOSTRCB_ERROR_RESPONSE_SENT             PMC_BIT8(1)
 442
 443 /* pmcraid_hcam.overlay_id values */
 444 #define HOSTRCB_OVERLAY_ID_08                   0x08
 445 #define HOSTRCB_OVERLAY_ID_09                   0x09
 446 #define HOSTRCB_OVERLAY_ID_11                   0x11
 447 #define HOSTRCB_OVERLAY_ID_12                   0x12
 448 #define HOSTRCB_OVERLAY_ID_13                   0x13
 449 #define HOSTRCB_OVERLAY_ID_14                   0x14
 450 #define HOSTRCB_OVERLAY_ID_16                   0x16
 451 #define HOSTRCB_OVERLAY_ID_17                   0x17
 452 #define HOSTRCB_OVERLAY_ID_20                   0x20
 453 #define HOSTRCB_OVERLAY_ID_FF                   0xFF
 454
 455 /* Implementation specific card details */
 456 struct pmcraid_chip_details {
 457         /* hardware register offsets */
 458         unsigned long  ioastatus;
 459         unsigned long  ioarrin;
 460         unsigned long  mailbox;
 461         unsigned long  global_intr_mask;
 462         unsigned long  ioa_host_intr;
 463         unsigned long  ioa_host_intr_clr;
 464         unsigned long  ioa_host_mask;
 465         unsigned long  ioa_host_mask_clr;
 466         unsigned long  host_ioa_intr;
 467         unsigned long  host_ioa_intr_clr;
 468
 469         /* timeout used during transitional to operational state */
 470         unsigned long transop_timeout;
 471 };
 472
 473 /* IOA to HOST doorbells (interrupts) */
 474 #define INTRS_TRANSITION_TO_OPERATIONAL         PMC_BIT32(0)
 475 #define INTRS_IOARCB_TRANSFER_FAILED            PMC_BIT32(3)
 476 #define INTRS_IOA_UNIT_CHECK                    PMC_BIT32(4)
 477 #define INTRS_NO_HRRQ_FOR_CMD_RESPONSE          PMC_BIT32(5)
 478 #define INTRS_CRITICAL_OP_IN_PROGRESS           PMC_BIT32(6)
 479 #define INTRS_IO_DEBUG_ACK                      PMC_BIT32(7)
 480 #define INTRS_IOARRIN_LOST                      PMC_BIT32(27)
 481 #define INTRS_SYSTEM_BUS_MMIO_ERROR             PMC_BIT32(28)
 482 #define INTRS_IOA_PROCESSOR_ERROR               PMC_BIT32(29)
 483 #define INTRS_HRRQ_VALID                        PMC_BIT32(30)
 484 #define INTRS_OPERATIONAL_STATUS                PMC_BIT32(0)
 485
 486 /* Host to IOA Doorbells */
 487 #define DOORBELL_RUNTIME_RESET                  PMC_BIT32(1)
 488 #define DOORBELL_IOA_RESET_ALERT                PMC_BIT32(7)
 489 #define DOORBELL_IOA_DEBUG_ALERT                PMC_BIT32(9)
 490 #define DOORBELL_ENABLE_DESTRUCTIVE_DIAGS       PMC_BIT32(8)
 491 #define DOORBELL_IOA_START_BIST                 PMC_BIT32(23)
 492 #define DOORBELL_RESET_IOA                      PMC_BIT32(31)
 493
 494 /* Global interrupt mask register value */
 495 #define GLOBAL_INTERRUPT_MASK                   0x4ULL
 496
 497 #define PMCRAID_ERROR_INTERRUPTS        (INTRS_IOARCB_TRANSFER_FAILED | \
 498                                          INTRS_IOA_UNIT_CHECK | \
 499                                          INTRS_NO_HRRQ_FOR_CMD_RESPONSE | \
 500                                          INTRS_IOARRIN_LOST | \
 501                                          INTRS_SYSTEM_BUS_MMIO_ERROR | \
 502                                          INTRS_IOA_PROCESSOR_ERROR)
 503
 504 #define PMCRAID_PCI_INTERRUPTS          (PMCRAID_ERROR_INTERRUPTS | \
 505                                          INTRS_HRRQ_VALID | \
 506                                          INTRS_CRITICAL_OP_IN_PROGRESS |\
 507                                          INTRS_TRANSITION_TO_OPERATIONAL)
 508
 509 /* control_block, associated with each of the commands contains IOARCB, IOADLs
 510  * memory for IOASA. Additional 3 * 16 bytes are allocated in order to support
 511  * additional request parameters (of max size 48) any command.
 512  */
 513 struct pmcraid_control_block {
 514         struct pmcraid_ioarcb ioarcb;
 515         struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_EXTERNAL + 3];
 516         struct pmcraid_ioasa ioasa;
 517 } __attribute__ ((packed, aligned(PMCRAID_IOARCB_ALIGNMENT)));
 518
 519 /* pmcraid_sglist - Scatter-gather list allocated for passthrough ioctls
 520  */
 521 struct pmcraid_sglist {
 522         u32 order;
 523         u32 num_sg;
 524         u32 num_dma_sg;
 525         u32 buffer_len;
 526         struct scatterlist scatterlist[1];
 527 };
 528
 529 /* pmcraid_cmd - LLD representation of SCSI command */
 530 struct pmcraid_cmd {
 531
 532         /* Ptr and bus address of DMA.able control block for this command */
 533         struct pmcraid_control_block *ioa_cb;
 534         dma_addr_t ioa_cb_bus_addr;
 535
 536         /* sense buffer for REQUEST SENSE command if firmware is not sending
 537          * auto sense data
 538          */
 539         dma_addr_t sense_buffer_dma;
 540         dma_addr_t dma_handle;
 541         u8 *sense_buffer;
 542
 543         /* pointer to mid layer structure of SCSI commands */
 544         struct scsi_cmnd *scsi_cmd;
 545
 546         struct list_head free_list;
 547         struct completion wait_for_completion;
 548         struct timer_list timer;        /* needed for internal commands */
 549         u32 timeout;                    /* current timeout value */
 550         u32 index;                      /* index into the command list */
 551         u8 completion_req;              /* for handling internal commands */
 552         u8 release;                     /* for handling completions */
 553
 554         void (*cmd_done) (struct pmcraid_cmd *);
 555         struct pmcraid_instance *drv_inst;
 556
 557         struct pmcraid_sglist *sglist; /* used for passthrough IOCTLs */
 558
 559         /* scratch used during reset sequence */
 560         union {
 561                 unsigned long time_left;
 562                 struct pmcraid_resource_entry *res;
 563         } u;
 564 };
 565
 566 /*
 567  * Interrupt registers of IOA
 568  */
 569 struct pmcraid_interrupts {
 570         void __iomem *ioa_host_interrupt_reg;
 571         void __iomem *ioa_host_interrupt_clr_reg;
 572         void __iomem *ioa_host_interrupt_mask_reg;
 573         void __iomem *ioa_host_interrupt_mask_clr_reg;
 574         void __iomem *global_interrupt_mask_reg;
 575         void __iomem *host_ioa_interrupt_reg;
 576         void __iomem *host_ioa_interrupt_clr_reg;
 577 };
 578
 579 /* ISR parameters LLD allocates (one for each MSI-X if enabled) vectors */
 580 struct pmcraid_isr_param {
 581         u8 hrrq_id;                     /* hrrq entry index */
 582         u16 vector;                     /* allocated msi-x vector */
 583         struct pmcraid_instance *drv_inst;
 584 };
 585
 586 /* AEN message header sent as part of event data to applications */
 587 struct pmcraid_aen_msg {
 588         u32 hostno;
 589         u32 length;
 590         u8  reserved[8];
 591         u8  data[0];
 592 };
 593
 594 struct pmcraid_hostrcb {
 595         struct pmcraid_instance *drv_inst;
 596         struct pmcraid_aen_msg *msg;
 597         struct pmcraid_hcam_hdr *hcam;  /* pointer to hcam buffer */
 598         struct pmcraid_cmd  *cmd;       /* pointer to command block used */
 599         dma_addr_t baddr;               /* system address of hcam buffer */
 600         atomic_t ignore;                /* process HCAM response ? */
 601 };
 602
 603 #define PMCRAID_AEN_HDR_SIZE    sizeof(struct pmcraid_aen_msg)
 604
 605
 606
 607 /*
 608  * Per adapter structure maintained by LLD
 609  */
 610 struct pmcraid_instance {
 611         /* Array of allowed-to-be-exposed resources, initialized from
 612          * Configutation Table, later updated with CCNs
 613          */
 614         struct pmcraid_resource_entry *res_entries;
 615
 616         struct list_head free_res_q;    /* res_entries lists for easy lookup */
 617         struct list_head used_res_q;    /* List of to be exposed resources */
 618         spinlock_t resource_lock;       /* spinlock to protect resource list */
 619
 620         void __iomem *mapped_dma_addr;
 621         void __iomem *ioa_status;       /* Iomapped IOA status register */
 622         void __iomem *mailbox;          /* Iomapped mailbox register */
 623         void __iomem *ioarrin;          /* IOmapped IOARR IN register */
 624
 625         struct pmcraid_interrupts int_regs;
 626         struct pmcraid_chip_details *chip_cfg;
 627
 628         /* HostRCBs needed for HCAM */
 629         struct pmcraid_hostrcb ldn;
 630         struct pmcraid_hostrcb ccn;
 631
 632
 633         /* Bus address of start of HRRQ */
 634         dma_addr_t hrrq_start_bus_addr[PMCRAID_NUM_MSIX_VECTORS];
 635
 636         /* Pointer to 1st entry of HRRQ */
 637         __be32 *hrrq_start[PMCRAID_NUM_MSIX_VECTORS];
 638
 639         /* Pointer to last entry of HRRQ */
 640         __be32 *hrrq_end[PMCRAID_NUM_MSIX_VECTORS];
 641
 642         /* Pointer to current pointer of hrrq */
 643         __be32 *hrrq_curr[PMCRAID_NUM_MSIX_VECTORS];
 644
 645         /* Lock for HRRQ access */
 646         spinlock_t hrrq_lock[PMCRAID_NUM_MSIX_VECTORS];
 647
 648         /* Expected toggle bit at host */
 649         u8 host_toggle_bit[PMCRAID_NUM_MSIX_VECTORS];
 650
 651         /* No of Reset IOA retries . IOA marked dead if threshold exceeds */
 652         u8 ioa_reset_attempts;
 653 #define PMCRAID_RESET_ATTEMPTS 3
 654
 655         /* Wait Q for  threads to wait for Reset IOA completion */
 656         wait_queue_head_t reset_wait_q;
 657         struct pmcraid_cmd *reset_cmd;
 658
 659         /* structures for supporting SIGIO based AEN. */
 660         struct fasync_struct *aen_queue;
 661         struct mutex aen_queue_lock;    /* lock for aen subscribers list */
 662         struct cdev cdev;
 663
 664         struct Scsi_Host *host; /* mid layer interface structure handle */
 665         struct pci_dev *pdev;   /* PCI device structure handle */
 666
 667         u8  current_log_level;  /* default level for logging IOASC errors */
 668
 669         u8  num_hrrq;           /* Number of interrupt vectors allocated */
 670         dev_t dev;              /* Major-Minor numbers for Char device */
 671
 672         /* Used as ISR handler argument */
 673         struct pmcraid_isr_param hrrq_vector[PMCRAID_NUM_MSIX_VECTORS];
 674
 675         /* configuration table */
 676         struct pmcraid_config_table *cfg_table;
 677         dma_addr_t cfg_table_bus_addr;
 678
 679         /* structures related to command blocks */
 680         struct kmem_cache *cmd_cachep;          /* cache for cmd blocks */
 681         struct pci_pool *control_pool;          /* pool for control blocks */
 682         char   cmd_pool_name[64];               /* name of cmd cache */
 683         char   ctl_pool_name[64];               /* name of control cache */
 684
 685         struct pmcraid_cmd *cmd_list[PMCRAID_MAX_CMD];
 686
 687         struct list_head free_cmd_pool;
 688         struct list_head pending_cmd_pool;
 689         spinlock_t free_pool_lock;              /* free pool lock */
 690         spinlock_t pending_pool_lock;           /* pending pool lock */
 691
 692         /* No of IO commands pending with FW */
 693         atomic_t outstanding_cmds;
 694
 695         /* should add/delete resources to mid-layer now ?*/
 696         atomic_t expose_resources;
 697
 698         /* Tasklet to handle deferred processing */
 699         struct tasklet_struct isr_tasklet[PMCRAID_NUM_MSIX_VECTORS];
 700
 701         /* Work-queue (Shared) for deferred reset processing */
 702         struct work_struct worker_q;
 703
 704
 705         u32 ioa_state:4;        /* For IOA Reset sequence FSM */
 706 #define IOA_STATE_OPERATIONAL       0x0
 707 #define IOA_STATE_UNKNOWN           0x1
 708 #define IOA_STATE_DEAD              0x2
 709 #define IOA_STATE_IN_SOFT_RESET     0x3
 710 #define IOA_STATE_IN_HARD_RESET     0x4
 711 #define IOA_STATE_IN_RESET_ALERT    0x5
 712 #define IOA_STATE_IN_BRINGDOWN      0x6
 713 #define IOA_STATE_IN_BRINGUP        0x7
 714
 715         u32 ioa_reset_in_progress:1; /* true if IOA reset is in progress */
 716         u32 ioa_hard_reset:1;   /* TRUE if Hard Reset is needed */
 717         u32 ioa_unit_check:1;   /* Indicates Unit Check condition */
 718         u32 ioa_bringdown:1;    /* whether IOA needs to be brought down */
 719         u32 force_ioa_reset:1;  /* force adapter reset ? */
 720         u32 reinit_cfg_table:1; /* reinit config table due to lost CCN */
 721         u32 ioa_shutdown_type:2;/* shutdown type used during reset */
 722 #define SHUTDOWN_NONE               0x0
 723 #define SHUTDOWN_NORMAL             0x1
 724 #define SHUTDOWN_ABBREV             0x2
 725
 726 };
 727
 728 /* LLD maintained resource entry structure */
 729 struct pmcraid_resource_entry {
 730         struct list_head queue; /* link to "to be exposed" resources */
 731         struct pmcraid_config_table_entry cfg_entry;
 732         struct scsi_device *scsi_dev;   /* Link scsi_device structure */
 733         atomic_t read_failures;         /* count of failed READ commands */
 734         atomic_t write_failures;        /* count of failed WRITE commands */
 735
 736         /* To indicate add/delete/modify during CCN */
 737         u8 change_detected;
 738 #define RES_CHANGE_ADD          0x1     /* add this to mid-layer */
 739 #define RES_CHANGE_DEL          0x2     /* remove this from mid-layer */
 740
 741         u8 reset_progress;      /* Device is resetting */
 742
 743         /*
 744          * When IOA asks for sync (i.e. IOASC = Not Ready, Sync Required), this
 745          * flag will be set, mid layer will be asked to retry. In the next
 746          * attempt, this flag will be checked in queuecommand() to set
 747          * SYNC_COMPLETE flag in IOARCB (flag_0).
 748          */
 749         u8 sync_reqd;
 750
 751         /* target indicates the mapped target_id assigned to this resource if
 752          * this is VSET resource. For non-VSET resources this will be un-used
 753          * or zero
 754          */
 755         u8 target;
 756 };
 757
 758 /* Data structures used in IOASC error code logging */
 759 struct pmcraid_ioasc_error {
 760         u32 ioasc_code;         /* IOASC code */
 761         u8 log_level;           /* default log level assignment. */
 762         char *error_string;
 763 };
 764
 765 /* Initial log_level assignments for various IOASCs */
 766 #define IOASC_LOG_LEVEL_NONE        0x0 /* no logging */
 767 #define IOASC_LOG_LEVEL_MUST        0x1 /* must log: all high-severity errors */
 768 #define IOASC_LOG_LEVEL_HARD        0x2 /* optional – low severity errors */
 769
 770 /* Error information maintained by LLD. LLD initializes the pmcraid_error_table
 771  * statically.
 772  */
 773 static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
 774         {0x01180600, IOASC_LOG_LEVEL_MUST,
 775          "Recovered Error, soft media error, sector reassignment suggested"},
 776         {0x015D0000, IOASC_LOG_LEVEL_MUST,
 777          "Recovered Error, failure prediction threshold exceeded"},
 778         {0x015D9200, IOASC_LOG_LEVEL_MUST,
 779          "Recovered Error, soft Cache Card Battery error threshold"},
 780         {0x015D9200, IOASC_LOG_LEVEL_MUST,
 781          "Recovered Error, soft Cache Card Battery error threshold"},
 782         {0x02048000, IOASC_LOG_LEVEL_MUST,
 783          "Not Ready, IOA Reset Required"},
 784         {0x02408500, IOASC_LOG_LEVEL_MUST,
 785          "Not Ready, IOA microcode download required"},
 786         {0x03110B00, IOASC_LOG_LEVEL_MUST,
 787          "Medium Error, data unreadable, reassignment suggested"},
 788         {0x03110C00, IOASC_LOG_LEVEL_MUST,
 789          "Medium Error, data unreadable do not reassign"},
 790         {0x03310000, IOASC_LOG_LEVEL_MUST,
 791          "Medium Error, media corrupted"},
 792         {0x04050000, IOASC_LOG_LEVEL_MUST,
 793          "Hardware Error, IOA can't communicate with device"},
 794         {0x04080000, IOASC_LOG_LEVEL_MUST,
 795          "Hardware Error, device bus error"},
 796         {0x04080000, IOASC_LOG_LEVEL_MUST,
 797          "Hardware Error, device bus is not functioning"},
 798         {0x04118000, IOASC_LOG_LEVEL_MUST,
 799          "Hardware Error, IOA reserved area data check"},
 800         {0x04118100, IOASC_LOG_LEVEL_MUST,
 801          "Hardware Error, IOA reserved area invalid data pattern"},
 802         {0x04118200, IOASC_LOG_LEVEL_MUST,
 803          "Hardware Error, IOA reserved area LRC error"},
 804         {0x04320000, IOASC_LOG_LEVEL_MUST,
 805          "Hardware Error, reassignment space exhausted"},
 806         {0x04330000, IOASC_LOG_LEVEL_MUST,
 807          "Hardware Error, data transfer underlength error"},
 808         {0x04330000, IOASC_LOG_LEVEL_MUST,
 809          "Hardware Error, data transfer overlength error"},
 810         {0x04418000, IOASC_LOG_LEVEL_MUST,
 811          "Hardware Error, PCI bus error"},
 812         {0x04440000, IOASC_LOG_LEVEL_MUST,
 813          "Hardware Error, device error"},
 814         {0x04448300, IOASC_LOG_LEVEL_MUST,
 815          "Hardware Error, undefined device response"},
 816         {0x04448400, IOASC_LOG_LEVEL_MUST,
 817          "Hardware Error, IOA microcode error"},
 818         {0x04448600, IOASC_LOG_LEVEL_MUST,
 819          "Hardware Error, IOA reset required"},
 820         {0x04449200, IOASC_LOG_LEVEL_MUST,
 821          "Hardware Error, hard Cache Fearuee Card Battery error"},
 822         {0x0444A000, IOASC_LOG_LEVEL_MUST,
 823          "Hardware Error, failed device altered"},
 824         {0x0444A200, IOASC_LOG_LEVEL_MUST,
 825          "Hardware Error, data check after reassignment"},
 826         {0x0444A300, IOASC_LOG_LEVEL_MUST,
 827          "Hardware Error, LRC error after reassignment"},
 828         {0x044A0000, IOASC_LOG_LEVEL_MUST,
 829          "Hardware Error, device bus error (msg/cmd phase)"},
 830         {0x04670400, IOASC_LOG_LEVEL_MUST,
 831          "Hardware Error, new device can't be used"},
 832         {0x04678000, IOASC_LOG_LEVEL_MUST,
 833          "Hardware Error, invalid multiadapter configuration"},
 834         {0x04678100, IOASC_LOG_LEVEL_MUST,
 835          "Hardware Error, incorrect connection between enclosures"},
 836         {0x04678200, IOASC_LOG_LEVEL_MUST,
 837          "Hardware Error, connections exceed IOA design limits"},
 838         {0x04678300, IOASC_LOG_LEVEL_MUST,
 839          "Hardware Error, incorrect multipath connection"},
 840         {0x04679000, IOASC_LOG_LEVEL_MUST,
 841          "Hardware Error, command to LUN failed"},
 842         {0x064C8000, IOASC_LOG_LEVEL_HARD,
 843          "Unit Attention, cache exists for missing/failed device"},
 844         {0x06670100, IOASC_LOG_LEVEL_HARD,
 845          "Unit Attention, incompatible exposed mode device"},
 846         {0x06670600, IOASC_LOG_LEVEL_HARD,
 847          "Unit Attention, attachment of logical unit failed"},
 848         {0x06678000, IOASC_LOG_LEVEL_MUST,
 849          "Unit Attention, cables exceed connective design limit"},
 850         {0x06678300, IOASC_LOG_LEVEL_MUST,
 851          "Unit Attention, incomplete multipath connection between" \
 852          "IOA and enclosure"},
 853         {0x06678400, IOASC_LOG_LEVEL_MUST,
 854          "Unit Attention, incomplete multipath connection between" \
 855          "device and enclosure"},
 856         {0x06678500, IOASC_LOG_LEVEL_MUST,
 857          "Unit Attention, incomplete multipath connection between" \
 858          "IOA and remote IOA"},
 859         {0x06678600, IOASC_LOG_LEVEL_HARD,
 860          "Unit Attention, missing remote IOA"},
 861         {0x06679100, IOASC_LOG_LEVEL_HARD,
 862          "Unit Attention, enclosure doesn't support required multipath" \
 863          "function"},
 864         {0x06698200, IOASC_LOG_LEVEL_HARD,
 865          "Unit Attention, corrupt array parity detected on device"},
 866         {0x066B0200, IOASC_LOG_LEVEL_MUST,
 867          "Unit Attention, array exposed"},
 868         {0x066B8200, IOASC_LOG_LEVEL_HARD,
 869          "Unit Attention, exposed array is still protected"},
 870         {0x066B9200, IOASC_LOG_LEVEL_MUST,
 871          "Unit Attention, Multipath redundancy level got worse"},
 872         {0x07270000, IOASC_LOG_LEVEL_HARD,
 873          "Data Protect, device is read/write protected by IOA"},
 874         {0x07278000, IOASC_LOG_LEVEL_HARD,
 875          "Data Protect, IOA doesn't support device attribute"},
 876         {0x07278100, IOASC_LOG_LEVEL_HARD,
 877          "Data Protect, NVRAM mirroring prohibited"},
 878         {0x07278400, IOASC_LOG_LEVEL_MUST,
 879          "Data Protect, array is short 2 or more devices"},
 880         {0x07278600, IOASC_LOG_LEVEL_MUST,
 881          "Data Protect, exposed array is short a required device"},
 882         {0x07278700, IOASC_LOG_LEVEL_MUST,
 883          "Data Protect, array members not at required addresses"},
 884         {0x07278800, IOASC_LOG_LEVEL_MUST,
 885          "Data Protect, exposed mode device resource address conflict"},
 886         {0x07278900, IOASC_LOG_LEVEL_MUST,
 887          "Data Protect, incorrect resource address of exposed mode device"},
 888         {0x07278A00, IOASC_LOG_LEVEL_MUST,
 889          "Data Protect, Array is missing a device and parity is out of sync"},
 890         {0x07278B00, IOASC_LOG_LEVEL_MUST,
 891          "Data Protect, maximum number of arrays already exist"},
 892         {0x07278C00, IOASC_LOG_LEVEL_HARD,
 893          "Data Protect, cannot locate cache data for device"},
 894         {0x07278D00, IOASC_LOG_LEVEL_HARD,
 895          "Data Protect, cache data exits for a changed device"},
 896         {0x07279100, IOASC_LOG_LEVEL_MUST,
 897          "Data Protect, detection of a device requiring format"},
 898         {0x07279200, IOASC_LOG_LEVEL_MUST,
 899          "Data Protect, IOA exceeds maximum number of devices"},
 900         {0x07279600, IOASC_LOG_LEVEL_MUST,
 901          "Data Protect, missing array, volume set is not functional"},
 902         {0x07279700, IOASC_LOG_LEVEL_MUST,
 903          "Data Protect, single device for a volume set"},
 904         {0x07279800, IOASC_LOG_LEVEL_MUST,
 905          "Data Protect, missing multiple devices for a volume set"},
 906         {0x07279900, IOASC_LOG_LEVEL_HARD,
 907          "Data Protect, maximum number of volument sets already exists"},
 908         {0x07279A00, IOASC_LOG_LEVEL_MUST,
 909          "Data Protect, other volume set problem"},
 910 };
 911
 912 /* macros to help in debugging */
 913 #define pmcraid_err(...)  \
 914         printk(KERN_ERR "MaxRAID: "__VA_ARGS__)
 915
 916 #define pmcraid_info(...) \
 917         if (pmcraid_debug_log) \
 918                 printk(KERN_INFO "MaxRAID: "__VA_ARGS__)
 919
 920 /* check if given command is a SCSI READ or SCSI WRITE command */
 921 #define SCSI_READ_CMD           0x1     /* any of SCSI READ commands */
 922 #define SCSI_WRITE_CMD          0x2     /* any of SCSI WRITE commands */
 923 #define SCSI_CMD_TYPE(opcode) \
 924 ({  u8 op = opcode; u8 __type = 0;\
 925         if (op == READ_6 || op == READ_10 || op == READ_12 || op == READ_16)\
 926                 __type = SCSI_READ_CMD;\
 927         else if (op == WRITE_6 || op == WRITE_10 || op == WRITE_12 || \
 928                  op == WRITE_16)\
 929                 __type = SCSI_WRITE_CMD;\
 930         __type;\
 931 })
 932
 933 #define IS_SCSI_READ_WRITE(opcode) \
 934 ({      u8 __type = SCSI_CMD_TYPE(opcode); \
 935         (__type == SCSI_READ_CMD || __type == SCSI_WRITE_CMD) ? 1 : 0;\
 936 })
 937
 938
 939 /*
 940  * pmcraid_ioctl_header - definition of header structure that preceeds all the
 941  * buffers given as ioctl arguements.
 942  *
 943  * .signature           : always ASCII string, "PMCRAID"
 944  * .reserved            : not used
 945  * .buffer_length       : length of the buffer following the header
 946  */
 947 struct pmcraid_ioctl_header {
 948         u8  signature[8];
 949         u32 reserved;
 950         u32 buffer_length;
 951 };
 952
 953 #define PMCRAID_IOCTL_SIGNATURE      "PMCRAID"
 954
 955
 956 /*
 957  * pmcraid_event_details - defines AEN details that apps can retrieve from LLD
 958  *
 959  * .rcb_ccn - complete RCB of CCN
 960  * .rcb_ldn - complete RCB of CCN
 961  */
 962 struct pmcraid_event_details {
 963         struct pmcraid_hcam_ccn rcb_ccn;
 964         struct pmcraid_hcam_ldn rcb_ldn;
 965 };
 966
 967 /*
 968  * pmcraid_driver_ioctl_buffer - structure passed as argument to most of the
 969  * PMC driver handled ioctls.
 970  */
 971 struct pmcraid_driver_ioctl_buffer {
 972         struct pmcraid_ioctl_header ioctl_header;
 973         struct pmcraid_event_details event_details;
 974 };
 975
 976 /*
 977  * pmcraid_passthrough_ioctl_buffer - structure given as argument to
 978  * passthrough(or firmware handled) IOCTL commands. Note that ioarcb requires
 979  * 32-byte alignment so, it is necessary to pack this structure to avoid any
 980  * holes between ioctl_header and passthrough buffer
 981  *
 982  * .ioactl_header : ioctl header
 983  * .ioarcb        : filled-up ioarcb buffer, driver always reads this buffer
 984  * .ioasa         : buffer for ioasa, driver fills this with IOASA from firmware
 985  * .request_buffer: The I/O buffer (flat), driver reads/writes to this based on
 986  *                  the transfer directions passed in ioarcb.flags0. Contents
 987  *                  of this buffer are valid only when ioarcb.data_transfer_len
 988  *                  is not zero.
 989  */
 990 struct pmcraid_passthrough_ioctl_buffer {
 991         struct pmcraid_ioctl_header ioctl_header;
 992         struct pmcraid_ioarcb ioarcb;
 993         struct pmcraid_ioasa  ioasa;
 994         u8  request_buffer[1];
 995 } __attribute__ ((packed));
 996
 997 /*
 998  * keys to differentiate between driver handled IOCTLs and passthrough
 999  * IOCTLs passed to IOA. driver determines the ioctl type using macro
1000  * _IOC_TYPE
1001  */
1002 #define PMCRAID_DRIVER_IOCTL         'D'
1003 #define PMCRAID_PASSTHROUGH_IOCTL    'F'
1004
1005 #define DRV_IOCTL(n, size) \
1006     _IOC(_IOC_READ|_IOC_WRITE, PMCRAID_DRIVER_IOCTL, (n), (size))
1007
1008 #define FMW_IOCTL(n, size) \
1009     _IOC(_IOC_READ|_IOC_WRITE, PMCRAID_PASSTHROUGH_IOCTL,  (n), (size))
1010
1011 /*
1012  * _ARGSIZE: macro that gives size of the argument type passed to an IOCTL cmd.
1013  * This is to facilitate applications avoiding un-necessary memory allocations.
1014  * For example, most of driver handled ioctls do not require ioarcb, ioasa.
1015  */
1016 #define _ARGSIZE(arg) (sizeof(struct pmcraid_ioctl_header) + sizeof(arg))
1017
1018 /* Driver handled IOCTL command definitions */
1019
1020 #define PMCRAID_IOCTL_RESET_ADAPTER          \
1021         DRV_IOCTL(5, sizeof(struct pmcraid_ioctl_header))
1022
1023 /* passthrough/firmware handled commands */
1024 #define PMCRAID_IOCTL_PASSTHROUGH_COMMAND         \
1025         FMW_IOCTL(1, sizeof(struct pmcraid_passthrough_ioctl_buffer))
1026
1027 #define PMCRAID_IOCTL_DOWNLOAD_MICROCODE     \
1028         FMW_IOCTL(2, sizeof(struct pmcraid_passthrough_ioctl_buffer))
1029
1030
1031 #endif /* _PMCRAID_H */