?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again)
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / hp.c
blob5c4d78c1ff42ae87db44d8dd5f72c32b9a6867e4
1 /* hp.c: A HP LAN ethernet driver for linux. */
2 /*
3 Written 1993-94 by Donald Becker.
4
5 Copyright 1993 United States Government as represented by the
6 Director, National Security Agency.
7
8 This software may be used and distributed according to the terms
9 of the GNU General Public License, incorporated herein by reference.
10
11 The author may be reached as becker@scyld.com, or C/O
12 Scyld Computing Corporation
13 410 Severn Ave., Suite 210
14 Annapolis MD 21403
15
16 This is a driver for the HP PC-LAN adaptors.
17
18 Sources:
19 The Crynwr packet driver.
20 */
21
22 static const char version[] =
23 "hp.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
24
25
26 #include <linux/module.h>
27 #include <linux/kernel.h>
28 #include <linux/errno.h>
29 #include <linux/ioport.h>
30 #include <linux/netdevice.h>
31 #include <linux/etherdevice.h>
32 #include <linux/init.h>
33 #include <linux/delay.h>
34
35 #include <asm/system.h>
36 #include <asm/io.h>
37
38 #include "8390.h"
39
40 #define DRV_NAME "hp"
41
42 /* A zero-terminated list of I/O addresses to be probed. */
43 static unsigned int hppclan_portlist[] __initdata =
44 { 0x300, 0x320, 0x340, 0x280, 0x2C0, 0x200, 0x240, 0};
45
46 #define HP_IO_EXTENT 32
47
48 #define HP_DATAPORT 0x0c /* "Remote DMA" data port. */
49 #define HP_ID 0x07
50 #define HP_CONFIGURE 0x08 /* Configuration register. */
51 #define HP_RUN 0x01 /* 1 == Run, 0 == reset. */
52 #define HP_IRQ 0x0E /* Mask for software-configured IRQ line. */
53 #define HP_DATAON 0x10 /* Turn on dataport */
54 #define NIC_OFFSET 0x10 /* Offset the 8390 registers. */
55
56 #define HP_START_PG 0x00 /* First page of TX buffer */
57 #define HP_8BSTOP_PG 0x80 /* Last page +1 of RX ring */
58 #define HP_16BSTOP_PG 0xFF /* Same, for 16 bit cards. */
59
60 static int hp_probe1(struct net_device *dev, int ioaddr);
61
62 static void hp_reset_8390(struct net_device *dev);
63 static void hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
64 int ring_page);
65 static void hp_block_input(struct net_device *dev, int count,
66 struct sk_buff *skb , int ring_offset);
67 static void hp_block_output(struct net_device *dev, int count,
68 const unsigned char *buf, int start_page);
69
70 static void hp_init_card(struct net_device *dev);
71
72 /* The map from IRQ number to HP_CONFIGURE register setting. */
73 /* My default is IRQ5 0 1 2 3 4 5 6 7 8 9 10 11 */
74 static char irqmap[16] __initdata= { 0, 0, 4, 6, 8,10, 0,14, 0, 4, 2,12,0,0,0,0};
75
76
77 /* Probe for an HP LAN adaptor.
78 Also initialize the card and fill in STATION_ADDR with the station
79 address. */
80
81 static int __init do_hp_probe(struct net_device *dev)
82 {
83 int i;
84 int base_addr = dev->base_addr;
85 int irq = dev->irq;
86
87 if (base_addr > 0x1ff) /* Check a single specified location. */
88 return hp_probe1(dev, base_addr);
89 else if (base_addr != 0) /* Don't probe at all. */
90 return -ENXIO;
91
92 for (i = 0; hppclan_portlist[i]; i++) {
93 if (hp_probe1(dev, hppclan_portlist[i]) == 0)
94 return 0;
95 dev->irq = irq;
96 }
97
98 return -ENODEV;
99 }
100
101 #ifndef MODULE
102 struct net_device * __init hp_probe(int unit)
103 {
104 struct net_device *dev = alloc_eip_netdev();
105 int err;
106
107 if (!dev)
108 return ERR_PTR(-ENOMEM);
109
110 sprintf(dev->name, "eth%d", unit);
111 netdev_boot_setup_check(dev);
112
113 err = do_hp_probe(dev);
114 if (err)
115 goto out;
116 return dev;
117 out:
118 free_netdev(dev);
119 return ERR_PTR(err);
120 }
121 #endif
122
123 static int __init hp_probe1(struct net_device *dev, int ioaddr)
124 {
125 int i, retval, board_id, wordmode;
126 const char *name;
127 static unsigned version_printed;
128
129 if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME))
130 return -EBUSY;
131
132 /* Check for the HP physical address, 08 00 09 xx xx xx. */
133 /* This really isn't good enough: we may pick up HP LANCE boards
134 also! Avoid the lance 0x5757 signature. */
135 if (inb(ioaddr) != 0x08
136 || inb(ioaddr+1) != 0x00
137 || inb(ioaddr+2) != 0x09
138 || inb(ioaddr+14) == 0x57) {
139 retval = -ENODEV;
140 goto out;
141 }
142
143 /* Set up the parameters based on the board ID.
144 If you have additional mappings, please mail them to me -djb. */
145 if ((board_id = inb(ioaddr + HP_ID)) & 0x80) {
146 name = "HP27247";
147 wordmode = 1;
148 } else {
149 name = "HP27250";
150 wordmode = 0;
151 }
152
153 if (ei_debug && version_printed++ == 0)
154 printk(version);
155
156 printk("%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr);
157
158 for(i = 0; i < ETHER_ADDR_LEN; i++)
159 dev->dev_addr[i] = inb(ioaddr + i);
160
161 printk(" %pM", dev->dev_addr);
162
163 /* Snarf the interrupt now. Someday this could be moved to open(). */
164 if (dev->irq < 2) {
165 int irq_16list[] = { 11, 10, 5, 3, 4, 7, 9, 0};
166 int irq_8list[] = { 7, 5, 3, 4, 9, 0};
167 int *irqp = wordmode ? irq_16list : irq_8list;
168 do {
169 int irq = *irqp;
170 if (request_irq (irq, NULL, 0, "bogus", NULL) != -EBUSY) {
171 unsigned long cookie = probe_irq_on();
172 /* Twinkle the interrupt, and check if it's seen. */
173 outb_p(irqmap[irq] | HP_RUN, ioaddr + HP_CONFIGURE);
174 outb_p( 0x00 | HP_RUN, ioaddr + HP_CONFIGURE);
175 if (irq == probe_irq_off(cookie) /* It's a good IRQ line! */
176 && request_irq (irq, eip_interrupt, 0, DRV_NAME, dev) == 0) {
177 printk(" selecting IRQ %d.\n", irq);
178 dev->irq = *irqp;
179 break;
180 }
181 }
182 } while (*++irqp);
183 if (*irqp == 0) {
184 printk(" no free IRQ lines.\n");
185 retval = -EBUSY;
186 goto out;
187 }
188 } else {
189 if (dev->irq == 2)
190 dev->irq = 9;
191 if ((retval = request_irq(dev->irq, eip_interrupt, 0, DRV_NAME, dev))) {
192 printk (" unable to get IRQ %d.\n", dev->irq);
193 goto out;
194 }
195 }
196
197 /* Set the base address to point to the NIC, not the "real" base! */
198 dev->base_addr = ioaddr + NIC_OFFSET;
199 dev->netdev_ops = &eip_netdev_ops;
200
201 ei_status.name = name;
202 ei_status.word16 = wordmode;
203 ei_status.tx_start_page = HP_START_PG;
204 ei_status.rx_start_page = HP_START_PG + TX_PAGES;
205 ei_status.stop_page = wordmode ? HP_16BSTOP_PG : HP_8BSTOP_PG;
206
207 ei_status.reset_8390 = &hp_reset_8390;
208 ei_status.get_8390_hdr = &hp_get_8390_hdr;
209 ei_status.block_input = &hp_block_input;
210 ei_status.block_output = &hp_block_output;
211 hp_init_card(dev);
212
213 retval = register_netdev(dev);
214 if (retval)
215 goto out1;
216 return 0;
217 out1:
218 free_irq(dev->irq, dev);
219 out:
220 release_region(ioaddr, HP_IO_EXTENT);
221 return retval;
222 }
223
224 static void
225 hp_reset_8390(struct net_device *dev)
226 {
227 int hp_base = dev->base_addr - NIC_OFFSET;
228 int saved_config = inb_p(hp_base + HP_CONFIGURE);
229
230 if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
231 outb_p(0x00, hp_base + HP_CONFIGURE);
232 ei_status.txing = 0;
233 /* Pause just a few cycles for the hardware reset to take place. */
234 udelay(5);
235
236 outb_p(saved_config, hp_base + HP_CONFIGURE);
237 udelay(5);
238
239 if ((inb_p(hp_base+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0)
240 printk("%s: hp_reset_8390() did not complete.\n", dev->name);
241
242 if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
243 return;
244 }
245
246 static void
247 hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
248 {
249 int nic_base = dev->base_addr;
250 int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
251
252 outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
253 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base);
254 outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
255 outb_p(0, nic_base + EN0_RCNTHI);
256 outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */
257 outb_p(ring_page, nic_base + EN0_RSARHI);
258 outb_p(E8390_RREAD+E8390_START, nic_base);
259
260 if (ei_status.word16)
261 insw(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
262 else
263 insb(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
264
265 outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
266 }
267
268 /* Block input and output, similar to the Crynwr packet driver. If you are
269 porting to a new ethercard look at the packet driver source for hints.
270 The HP LAN doesn't use shared memory -- we put the packet
271 out through the "remote DMA" dataport. */
272
273 static void
274 hp_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
275 {
276 int nic_base = dev->base_addr;
277 int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
278 int xfer_count = count;
279 char *buf = skb->data;
280
281 outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
282 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base);
283 outb_p(count & 0xff, nic_base + EN0_RCNTLO);
284 outb_p(count >> 8, nic_base + EN0_RCNTHI);
285 outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
286 outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
287 outb_p(E8390_RREAD+E8390_START, nic_base);
288 if (ei_status.word16) {
289 insw(nic_base - NIC_OFFSET + HP_DATAPORT,buf,count>>1);
290 if (count & 0x01)
291 buf[count-1] = inb(nic_base - NIC_OFFSET + HP_DATAPORT), xfer_count++;
292 } else {
293 insb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count);
294 }
295 /* This is for the ALPHA version only, remove for later releases. */
296 if (ei_debug > 0) { /* DMA termination address check... */
297 int high = inb_p(nic_base + EN0_RSARHI);
298 int low = inb_p(nic_base + EN0_RSARLO);
299 int addr = (high << 8) + low;
300 /* Check only the lower 8 bits so we can ignore ring wrap. */
301 if (((ring_offset + xfer_count) & 0xff) != (addr & 0xff))
302 printk("%s: RX transfer address mismatch, %#4.4x vs. %#4.4x (actual).\n",
303 dev->name, ring_offset + xfer_count, addr);
304 }
305 outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
306 }
307
308 static void
309 hp_block_output(struct net_device *dev, int count,
310 const unsigned char *buf, int start_page)
311 {
312 int nic_base = dev->base_addr;
313 int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
314
315 outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
316 /* Round the count up for word writes. Do we need to do this?
317 What effect will an odd byte count have on the 8390?
318 I should check someday. */
319 if (ei_status.word16 && (count & 0x01))
320 count++;
321 /* We should already be in page 0, but to be safe... */
322 outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base);
323
324 #ifdef NE8390_RW_BUGFIX
325 /* Handle the read-before-write bug the same way as the
326 Crynwr packet driver -- the NatSemi method doesn't work. */
327 outb_p(0x42, nic_base + EN0_RCNTLO);
328 outb_p(0, nic_base + EN0_RCNTHI);
329 outb_p(0xff, nic_base + EN0_RSARLO);
330 outb_p(0x00, nic_base + EN0_RSARHI);
331 #define NE_CMD 0x00
332 outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD);
333 /* Make certain that the dummy read has occurred. */
334 inb_p(0x61);
335 inb_p(0x61);
336 #endif
337
338 outb_p(count & 0xff, nic_base + EN0_RCNTLO);
339 outb_p(count >> 8, nic_base + EN0_RCNTHI);
340 outb_p(0x00, nic_base + EN0_RSARLO);
341 outb_p(start_page, nic_base + EN0_RSARHI);
342
343 outb_p(E8390_RWRITE+E8390_START, nic_base);
344 if (ei_status.word16) {
345 /* Use the 'rep' sequence for 16 bit boards. */
346 outsw(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count>>1);
347 } else {
348 outsb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count);
349 }
350
351 /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here -- it's broken! */
352
353 /* This is for the ALPHA version only, remove for later releases. */
354 if (ei_debug > 0) { /* DMA termination address check... */
355 int high = inb_p(nic_base + EN0_RSARHI);
356 int low = inb_p(nic_base + EN0_RSARLO);
357 int addr = (high << 8) + low;
358 if ((start_page << 8) + count != addr)
359 printk("%s: TX Transfer address mismatch, %#4.4x vs. %#4.4x.\n",
360 dev->name, (start_page << 8) + count, addr);
361 }
362 outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
363 return;
364 }
365
366 /* This function resets the ethercard if something screws up. */
367 static void __init
368 hp_init_card(struct net_device *dev)
369 {
370 int irq = dev->irq;
371 NS8390p_init(dev, 0);
372 outb_p(irqmap[irq&0x0f] | HP_RUN,
373 dev->base_addr - NIC_OFFSET + HP_CONFIGURE);
374 return;
375 }
376
377 #ifdef MODULE
378 #define MAX_HP_CARDS 4 /* Max number of HP cards per module */
379 static struct net_device *dev_hp[MAX_HP_CARDS];
380 static int io[MAX_HP_CARDS];
381 static int irq[MAX_HP_CARDS];
382
383 module_param_array(io, int, NULL, 0);
384 module_param_array(irq, int, NULL, 0);
385 MODULE_PARM_DESC(io, "I/O base address(es)");
386 MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
387 MODULE_DESCRIPTION("HP PC-LAN ISA ethernet driver");
388 MODULE_LICENSE("GPL");
389
390 /* This is set up so that only a single autoprobe takes place per call.
391 ISA device autoprobes on a running machine are not recommended. */
392 int __init
393 init_module(void)
394 {
395 struct net_device *dev;
396 int this_dev, found = 0;
397
398 for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) {
399 if (io[this_dev] == 0) {
400 if (this_dev != 0) break; /* only autoprobe 1st one */
401 printk(KERN_NOTICE "hp.c: Presently autoprobing (not recommended) for a single card.\n");
402 }
403 dev = alloc_eip_netdev();
404 if (!dev)
405 break;
406 dev->irq = irq[this_dev];
407 dev->base_addr = io[this_dev];
408 if (do_hp_probe(dev) == 0) {
409 dev_hp[found++] = dev;
410 continue;
411 }
412 free_netdev(dev);
413 printk(KERN_WARNING "hp.c: No HP card found (i/o = 0x%x).\n", io[this_dev]);
414 break;
415 }
416 if (found)
417 return 0;
418 return -ENXIO;
419 }
420
421 static void cleanup_card(struct net_device *dev)
422 {
423 free_irq(dev->irq, dev);
424 release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT);
425 }
426
427 void __exit
428 cleanup_module(void)
429 {
430 int this_dev;
431
432 for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) {
433 struct net_device *dev = dev_hp[this_dev];
434 if (dev) {
435 unregister_netdev(dev);
436 cleanup_card(dev);
437 free_netdev(dev);
438 }
439 }
440 }
441 #endif /* MODULE */
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree