?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86, apic: Fix spurious error interrupts triggering on all non-boot APs
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / char / riscom8.c
blob0a8d1e56c99362e0da9b1df06c2452d30341d006
1 /*
2 * linux/drivers/char/riscom.c -- RISCom/8 multiport serial driver.
3 *
4 * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)
5 *
6 * This code is loosely based on the Linux serial driver, written by
7 * Linus Torvalds, Theodore T'so and others. The RISCom/8 card
8 * programming info was obtained from various drivers for other OSes
9 * (FreeBSD, ISC, etc), but no source code from those drivers were
10 * directly included in this driver.
11 *
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 *
27 * Revision 1.1
28 *
29 * ChangeLog:
30 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 27-Jun-2001
31 * - get rid of check_region and several cleanups
32 */
33
34 #include <linux/module.h>
35
36 #include <linux/io.h>
37 #include <linux/kernel.h>
38 #include <linux/sched.h>
39 #include <linux/ioport.h>
40 #include <linux/interrupt.h>
41 #include <linux/errno.h>
42 #include <linux/tty.h>
43 #include <linux/mm.h>
44 #include <linux/serial.h>
45 #include <linux/fcntl.h>
46 #include <linux/major.h>
47 #include <linux/init.h>
48 #include <linux/delay.h>
49 #include <linux/tty_flip.h>
50 #include <linux/smp_lock.h>
51 #include <linux/spinlock.h>
52 #include <linux/device.h>
53
54 #include <linux/uaccess.h>
55
56 #include "riscom8.h"
57 #include "riscom8_reg.h"
58
59 /* Am I paranoid or not ? ;-) */
60 #define RISCOM_PARANOIA_CHECK
61
62 /*
63 * Crazy InteliCom/8 boards sometimes have swapped CTS & DSR signals.
64 * You can slightly speed up things by #undefing the following option,
65 * if you are REALLY sure that your board is correct one.
66 */
67
68 #define RISCOM_BRAIN_DAMAGED_CTS
69
70 /*
71 * The following defines are mostly for testing purposes. But if you need
72 * some nice reporting in your syslog, you can define them also.
73 */
74 #undef RC_REPORT_FIFO
75 #undef RC_REPORT_OVERRUN
76
77
78 #define RISCOM_LEGAL_FLAGS \
79 (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \
80 ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \
81 ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
82
83 static struct tty_driver *riscom_driver;
84
85 static DEFINE_SPINLOCK(riscom_lock);
86
87 static struct riscom_board rc_board[RC_NBOARD] = {
88 {
89 .base = RC_IOBASE1,
90 },
91 {
92 .base = RC_IOBASE2,
93 },
94 {
95 .base = RC_IOBASE3,
96 },
97 {
98 .base = RC_IOBASE4,
99 },
100 };
101
102 static struct riscom_port rc_port[RC_NBOARD * RC_NPORT];
103
104 /* RISCom/8 I/O ports addresses (without address translation) */
105 static unsigned short rc_ioport[] = {
106 #if 1
107 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c,
108 #else
109 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, 0x10,
110 0x11, 0x12, 0x18, 0x28, 0x31, 0x32, 0x39, 0x3a, 0x40, 0x41, 0x61, 0x62,
111 0x63, 0x64, 0x6b, 0x70, 0x71, 0x78, 0x7a, 0x7b, 0x7f, 0x100, 0x101
112 #endif
113 };
114 #define RC_NIOPORT ARRAY_SIZE(rc_ioport)
115
116
117 static int rc_paranoia_check(struct riscom_port const *port,
118 char *name, const char *routine)
119 {
120 #ifdef RISCOM_PARANOIA_CHECK
121 static const char badmagic[] = KERN_INFO
122 "rc: Warning: bad riscom port magic number for device %s in %s\n";
123 static const char badinfo[] = KERN_INFO
124 "rc: Warning: null riscom port for device %s in %s\n";
125
126 if (!port) {
127 printk(badinfo, name, routine);
128 return 1;
129 }
130 if (port->magic != RISCOM8_MAGIC) {
131 printk(badmagic, name, routine);
132 return 1;
133 }
134 #endif
135 return 0;
136 }
137
138 /*
139 *
140 * Service functions for RISCom/8 driver.
141 *
142 */
143
144 /* Get board number from pointer */
145 static inline int board_No(struct riscom_board const *bp)
146 {
147 return bp - rc_board;
148 }
149
150 /* Get port number from pointer */
151 static inline int port_No(struct riscom_port const *port)
152 {
153 return RC_PORT(port - rc_port);
154 }
155
156 /* Get pointer to board from pointer to port */
157 static inline struct riscom_board *port_Board(struct riscom_port const *port)
158 {
159 return &rc_board[RC_BOARD(port - rc_port)];
160 }
161
162 /* Input Byte from CL CD180 register */
163 static inline unsigned char rc_in(struct riscom_board const *bp,
164 unsigned short reg)
165 {
166 return inb(bp->base + RC_TO_ISA(reg));
167 }
168
169 /* Output Byte to CL CD180 register */
170 static inline void rc_out(struct riscom_board const *bp, unsigned short reg,
171 unsigned char val)
172 {
173 outb(val, bp->base + RC_TO_ISA(reg));
174 }
175
176 /* Wait for Channel Command Register ready */
177 static void rc_wait_CCR(struct riscom_board const *bp)
178 {
179 unsigned long delay;
180
181 /* FIXME: need something more descriptive then 100000 :) */
182 for (delay = 100000; delay; delay--)
183 if (!rc_in(bp, CD180_CCR))
184 return;
185
186 printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp));
187 }
188
189 /*
190 * RISCom/8 probe functions.
191 */
192
193 static int rc_request_io_range(struct riscom_board * const bp)
194 {
195 int i;
196
197 for (i = 0; i < RC_NIOPORT; i++)
198 if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1,
199 "RISCom/8")) {
200 goto out_release;
201 }
202 return 0;
203 out_release:
204 printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n",
205 board_No(bp), bp->base);
206 while (--i >= 0)
207 release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
208 return 1;
209 }
210
211 static void rc_release_io_range(struct riscom_board * const bp)
212 {
213 int i;
214
215 for (i = 0; i < RC_NIOPORT; i++)
216 release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
217 }
218
219 /* Reset and setup CD180 chip */
220 static void __init rc_init_CD180(struct riscom_board const *bp)
221 {
222 unsigned long flags;
223
224 spin_lock_irqsave(&riscom_lock, flags);
225
226 rc_out(bp, RC_CTOUT, 0); /* Clear timeout */
227 rc_wait_CCR(bp); /* Wait for CCR ready */
228 rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */
229 spin_unlock_irqrestore(&riscom_lock, flags);
230 msleep(50); /* Delay 0.05 sec */
231 spin_lock_irqsave(&riscom_lock, flags);
232 rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */
233 rc_out(bp, CD180_GICR, 0); /* Clear all bits */
234 rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */
235 rc_out(bp, CD180_PILR2, RC_ACK_TINT); /* Prio for tx intr */
236 rc_out(bp, CD180_PILR3, RC_ACK_RINT); /* Prio for rx intr */
237
238 /* Setting up prescaler. We need 4 ticks per 1 ms */
239 rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8);
240 rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff);
241
242 spin_unlock_irqrestore(&riscom_lock, flags);
243 }
244
245 /* Main probing routine, also sets irq. */
246 static int __init rc_probe(struct riscom_board *bp)
247 {
248 unsigned char val1, val2;
249 int irqs = 0;
250 int retries;
251
252 bp->irq = 0;
253
254 if (rc_request_io_range(bp))
255 return 1;
256
257 /* Are the I/O ports here ? */
258 rc_out(bp, CD180_PPRL, 0x5a);
259 outb(0xff, 0x80);
260 val1 = rc_in(bp, CD180_PPRL);
261 rc_out(bp, CD180_PPRL, 0xa5);
262 outb(0x00, 0x80);
263 val2 = rc_in(bp, CD180_PPRL);
264
265 if ((val1 != 0x5a) || (val2 != 0xa5)) {
266 printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n",
267 board_No(bp), bp->base);
268 goto out_release;
269 }
270
271 /* It's time to find IRQ for this board */
272 for (retries = 0; retries < 5 && irqs <= 0; retries++) {
273 irqs = probe_irq_on();
274 rc_init_CD180(bp); /* Reset CD180 chip */
275 rc_out(bp, CD180_CAR, 2); /* Select port 2 */
276 rc_wait_CCR(bp);
277 rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter */
278 rc_out(bp, CD180_IER, IER_TXRDY);/* Enable tx empty intr */
279 msleep(50);
280 irqs = probe_irq_off(irqs);
281 val1 = rc_in(bp, RC_BSR); /* Get Board Status reg */
282 val2 = rc_in(bp, RC_ACK_TINT); /* ACK interrupt */
283 rc_init_CD180(bp); /* Reset CD180 again */
284
285 if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX))) {
286 printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not "
287 "found.\n", board_No(bp), bp->base);
288 goto out_release;
289 }
290 }
291
292 if (irqs <= 0) {
293 printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board "
294 "at 0x%03x.\n", board_No(bp), bp->base);
295 goto out_release;
296 }
297 bp->irq = irqs;
298 bp->flags |= RC_BOARD_PRESENT;
299
300 printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at "
301 "0x%03x, IRQ %d.\n",
302 board_No(bp),
303 (rc_in(bp, CD180_GFRCR) & 0x0f) + 'A', /* Board revision */
304 bp->base, bp->irq);
305
306 return 0;
307 out_release:
308 rc_release_io_range(bp);
309 return 1;
310 }
311
312 /*
313 *
314 * Interrupt processing routines.
315 *
316 */
317
318 static struct riscom_port *rc_get_port(struct riscom_board const *bp,
319 unsigned char const *what)
320 {
321 unsigned char channel;
322 struct riscom_port *port;
323
324 channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF;
325 if (channel < CD180_NCH) {
326 port = &rc_port[board_No(bp) * RC_NPORT + channel];
327 if (port->port.flags & ASYNC_INITIALIZED)
328 return port;
329 }
330 printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
331 board_No(bp), what, channel);
332 return NULL;
333 }
334
335 static void rc_receive_exc(struct riscom_board const *bp)
336 {
337 struct riscom_port *port;
338 struct tty_struct *tty;
339 unsigned char status;
340 unsigned char ch, flag;
341
342 port = rc_get_port(bp, "Receive");
343 if (port == NULL)
344 return;
345
346 tty = tty_port_tty_get(&port->port);
347
348 #ifdef RC_REPORT_OVERRUN
349 status = rc_in(bp, CD180_RCSR);
350 if (status & RCSR_OE)
351 port->overrun++;
352 status &= port->mark_mask;
353 #else
354 status = rc_in(bp, CD180_RCSR) & port->mark_mask;
355 #endif
356 ch = rc_in(bp, CD180_RDR);
357 if (!status)
358 goto out;
359 if (status & RCSR_TOUT) {
360 printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
361 "Hardware problems ?\n",
362 board_No(bp), port_No(port));
363 goto out;
364
365 } else if (status & RCSR_BREAK) {
366 printk(KERN_INFO "rc%d: port %d: Handling break...\n",
367 board_No(bp), port_No(port));
368 flag = TTY_BREAK;
369 if (tty && (port->port.flags & ASYNC_SAK))
370 do_SAK(tty);
371
372 } else if (status & RCSR_PE)
373 flag = TTY_PARITY;
374
375 else if (status & RCSR_FE)
376 flag = TTY_FRAME;
377
378 else if (status & RCSR_OE)
379 flag = TTY_OVERRUN;
380 else
381 flag = TTY_NORMAL;
382
383 if (tty) {
384 tty_insert_flip_char(tty, ch, flag);
385 tty_flip_buffer_push(tty);
386 }
387 out:
388 tty_kref_put(tty);
389 }
390
391 static void rc_receive(struct riscom_board const *bp)
392 {
393 struct riscom_port *port;
394 struct tty_struct *tty;
395 unsigned char count;
396
397 port = rc_get_port(bp, "Receive");
398 if (port == NULL)
399 return;
400
401 tty = tty_port_tty_get(&port->port);
402
403 count = rc_in(bp, CD180_RDCR);
404
405 #ifdef RC_REPORT_FIFO
406 port->hits[count > 8 ? 9 : count]++;
407 #endif
408
409 while (count--) {
410 u8 ch = rc_in(bp, CD180_RDR);
411 if (tty)
412 tty_insert_flip_char(tty, ch, TTY_NORMAL);
413 }
414 if (tty) {
415 tty_flip_buffer_push(tty);
416 tty_kref_put(tty);
417 }
418 }
419
420 static void rc_transmit(struct riscom_board const *bp)
421 {
422 struct riscom_port *port;
423 struct tty_struct *tty;
424 unsigned char count;
425
426 port = rc_get_port(bp, "Transmit");
427 if (port == NULL)
428 return;
429
430 tty = tty_port_tty_get(&port->port);
431
432 if (port->IER & IER_TXEMPTY) {
433 /* FIFO drained */
434 rc_out(bp, CD180_CAR, port_No(port));
435 port->IER &= ~IER_TXEMPTY;
436 rc_out(bp, CD180_IER, port->IER);
437 goto out;
438 }
439
440 if ((port->xmit_cnt <= 0 && !port->break_length)
441 || (tty && (tty->stopped || tty->hw_stopped))) {
442 rc_out(bp, CD180_CAR, port_No(port));
443 port->IER &= ~IER_TXRDY;
444 rc_out(bp, CD180_IER, port->IER);
445 goto out;
446 }
447
448 if (port->break_length) {
449 if (port->break_length > 0) {
450 if (port->COR2 & COR2_ETC) {
451 rc_out(bp, CD180_TDR, CD180_C_ESC);
452 rc_out(bp, CD180_TDR, CD180_C_SBRK);
453 port->COR2 &= ~COR2_ETC;
454 }
455 count = min_t(int, port->break_length, 0xff);
456 rc_out(bp, CD180_TDR, CD180_C_ESC);
457 rc_out(bp, CD180_TDR, CD180_C_DELAY);
458 rc_out(bp, CD180_TDR, count);
459 port->break_length -= count;
460 if (port->break_length == 0)
461 port->break_length--;
462 } else {
463 rc_out(bp, CD180_TDR, CD180_C_ESC);
464 rc_out(bp, CD180_TDR, CD180_C_EBRK);
465 rc_out(bp, CD180_COR2, port->COR2);
466 rc_wait_CCR(bp);
467 rc_out(bp, CD180_CCR, CCR_CORCHG2);
468 port->break_length = 0;
469 }
470 goto out;
471 }
472
473 count = CD180_NFIFO;
474 do {
475 rc_out(bp, CD180_TDR, port->port.xmit_buf[port->xmit_tail++]);
476 port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
477 if (--port->xmit_cnt <= 0)
478 break;
479 } while (--count > 0);
480
481 if (port->xmit_cnt <= 0) {
482 rc_out(bp, CD180_CAR, port_No(port));
483 port->IER &= ~IER_TXRDY;
484 rc_out(bp, CD180_IER, port->IER);
485 }
486 if (tty && port->xmit_cnt <= port->wakeup_chars)
487 tty_wakeup(tty);
488 out:
489 tty_kref_put(tty);
490 }
491
492 static void rc_check_modem(struct riscom_board const *bp)
493 {
494 struct riscom_port *port;
495 struct tty_struct *tty;
496 unsigned char mcr;
497
498 port = rc_get_port(bp, "Modem");
499 if (port == NULL)
500 return;
501
502 tty = tty_port_tty_get(&port->port);
503
504 mcr = rc_in(bp, CD180_MCR);
505 if (mcr & MCR_CDCHG) {
506 if (rc_in(bp, CD180_MSVR) & MSVR_CD)
507 wake_up_interruptible(&port->port.open_wait);
508 else if (tty)
509 tty_hangup(tty);
510 }
511
512 #ifdef RISCOM_BRAIN_DAMAGED_CTS
513 if (mcr & MCR_CTSCHG) {
514 if (rc_in(bp, CD180_MSVR) & MSVR_CTS) {
515 port->IER |= IER_TXRDY;
516 if (tty) {
517 tty->hw_stopped = 0;
518 if (port->xmit_cnt <= port->wakeup_chars)
519 tty_wakeup(tty);
520 }
521 } else {
522 if (tty)
523 tty->hw_stopped = 1;
524 port->IER &= ~IER_TXRDY;
525 }
526 rc_out(bp, CD180_IER, port->IER);
527 }
528 if (mcr & MCR_DSRCHG) {
529 if (rc_in(bp, CD180_MSVR) & MSVR_DSR) {
530 port->IER |= IER_TXRDY;
531 if (tty) {
532 tty->hw_stopped = 0;
533 if (port->xmit_cnt <= port->wakeup_chars)
534 tty_wakeup(tty);
535 }
536 } else {
537 if (tty)
538 tty->hw_stopped = 1;
539 port->IER &= ~IER_TXRDY;
540 }
541 rc_out(bp, CD180_IER, port->IER);
542 }
543 #endif /* RISCOM_BRAIN_DAMAGED_CTS */
544
545 /* Clear change bits */
546 rc_out(bp, CD180_MCR, 0);
547 tty_kref_put(tty);
548 }
549
550 /* The main interrupt processing routine */
551 static irqreturn_t rc_interrupt(int dummy, void *dev_id)
552 {
553 unsigned char status;
554 unsigned char ack;
555 struct riscom_board *bp = dev_id;
556 unsigned long loop = 0;
557 int handled = 0;
558
559 if (!(bp->flags & RC_BOARD_ACTIVE))
560 return IRQ_NONE;
561
562 while ((++loop < 16) && ((status = ~(rc_in(bp, RC_BSR))) &
563 (RC_BSR_TOUT | RC_BSR_TINT |
564 RC_BSR_MINT | RC_BSR_RINT))) {
565 handled = 1;
566 if (status & RC_BSR_TOUT)
567 printk(KERN_WARNING "rc%d: Got timeout. Hardware "
568 "error?\n", board_No(bp));
569 else if (status & RC_BSR_RINT) {
570 ack = rc_in(bp, RC_ACK_RINT);
571 if (ack == (RC_ID | GIVR_IT_RCV))
572 rc_receive(bp);
573 else if (ack == (RC_ID | GIVR_IT_REXC))
574 rc_receive_exc(bp);
575 else
576 printk(KERN_WARNING "rc%d: Bad receive ack "
577 "0x%02x.\n",
578 board_No(bp), ack);
579 } else if (status & RC_BSR_TINT) {
580 ack = rc_in(bp, RC_ACK_TINT);
581 if (ack == (RC_ID | GIVR_IT_TX))
582 rc_transmit(bp);
583 else
584 printk(KERN_WARNING "rc%d: Bad transmit ack "
585 "0x%02x.\n",
586 board_No(bp), ack);
587 } else /* if (status & RC_BSR_MINT) */ {
588 ack = rc_in(bp, RC_ACK_MINT);
589 if (ack == (RC_ID | GIVR_IT_MODEM))
590 rc_check_modem(bp);
591 else
592 printk(KERN_WARNING "rc%d: Bad modem ack "
593 "0x%02x.\n",
594 board_No(bp), ack);
595 }
596 rc_out(bp, CD180_EOIR, 0); /* Mark end of interrupt */
597 rc_out(bp, RC_CTOUT, 0); /* Clear timeout flag */
598 }
599 return IRQ_RETVAL(handled);
600 }
601
602 /*
603 * Routines for open & close processing.
604 */
605
606 /* Called with disabled interrupts */
607 static int rc_setup_board(struct riscom_board *bp)
608 {
609 int error;
610
611 if (bp->flags & RC_BOARD_ACTIVE)
612 return 0;
613
614 error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED,
615 "RISCom/8", bp);
616 if (error)
617 return error;
618
619 rc_out(bp, RC_CTOUT, 0); /* Just in case */
620 bp->DTR = ~0;
621 rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */
622
623 bp->flags |= RC_BOARD_ACTIVE;
624
625 return 0;
626 }
627
628 /* Called with disabled interrupts */
629 static void rc_shutdown_board(struct riscom_board *bp)
630 {
631 if (!(bp->flags & RC_BOARD_ACTIVE))
632 return;
633
634 bp->flags &= ~RC_BOARD_ACTIVE;
635
636 free_irq(bp->irq, NULL);
637
638 bp->DTR = ~0;
639 rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */
640
641 }
642
643 /*
644 * Setting up port characteristics.
645 * Must be called with disabled interrupts
646 */
647 static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp,
648 struct riscom_port *port)
649 {
650 unsigned long baud;
651 long tmp;
652 unsigned char cor1 = 0, cor3 = 0;
653 unsigned char mcor1 = 0, mcor2 = 0;
654
655 port->IER = 0;
656 port->COR2 = 0;
657 port->MSVR = MSVR_RTS;
658
659 baud = tty_get_baud_rate(tty);
660
661 /* Select port on the board */
662 rc_out(bp, CD180_CAR, port_No(port));
663
664 if (!baud) {
665 /* Drop DTR & exit */
666 bp->DTR |= (1u << port_No(port));
667 rc_out(bp, RC_DTR, bp->DTR);
668 return;
669 } else {
670 /* Set DTR on */
671 bp->DTR &= ~(1u << port_No(port));
672 rc_out(bp, RC_DTR, bp->DTR);
673 }
674
675 /*
676 * Now we must calculate some speed depended things
677 */
678
679 /* Set baud rate for port */
680 tmp = (((RC_OSCFREQ + baud/2) / baud +
681 CD180_TPC/2) / CD180_TPC);
682
683 rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff);
684 rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff);
685 rc_out(bp, CD180_RBPRL, tmp & 0xff);
686 rc_out(bp, CD180_TBPRL, tmp & 0xff);
687
688 baud = (baud + 5) / 10; /* Estimated CPS */
689
690 /* Two timer ticks seems enough to wakeup something like SLIP driver */
691 tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO;
692 port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
693 SERIAL_XMIT_SIZE - 1 : tmp);
694
695 /* Receiver timeout will be transmission time for 1.5 chars */
696 tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud;
697 tmp = (tmp > 0xff) ? 0xff : tmp;
698 rc_out(bp, CD180_RTPR, tmp);
699
700 switch (C_CSIZE(tty)) {
701 case CS5:
702 cor1 |= COR1_5BITS;
703 break;
704 case CS6:
705 cor1 |= COR1_6BITS;
706 break;
707 case CS7:
708 cor1 |= COR1_7BITS;
709 break;
710 case CS8:
711 cor1 |= COR1_8BITS;
712 break;
713 }
714 if (C_CSTOPB(tty))
715 cor1 |= COR1_2SB;
716
717 cor1 |= COR1_IGNORE;
718 if (C_PARENB(tty)) {
719 cor1 |= COR1_NORMPAR;
720 if (C_PARODD(tty))
721 cor1 |= COR1_ODDP;
722 if (I_INPCK(tty))
723 cor1 &= ~COR1_IGNORE;
724 }
725 /* Set marking of some errors */
726 port->mark_mask = RCSR_OE | RCSR_TOUT;
727 if (I_INPCK(tty))
728 port->mark_mask |= RCSR_FE | RCSR_PE;
729 if (I_BRKINT(tty) || I_PARMRK(tty))
730 port->mark_mask |= RCSR_BREAK;
731 if (I_IGNPAR(tty))
732 port->mark_mask &= ~(RCSR_FE | RCSR_PE);
733 if (I_IGNBRK(tty)) {
734 port->mark_mask &= ~RCSR_BREAK;
735 if (I_IGNPAR(tty))
736 /* Real raw mode. Ignore all */
737 port->mark_mask &= ~RCSR_OE;
738 }
739 /* Enable Hardware Flow Control */
740 if (C_CRTSCTS(tty)) {
741 #ifdef RISCOM_BRAIN_DAMAGED_CTS
742 port->IER |= IER_DSR | IER_CTS;
743 mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
744 mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
745 tty->hw_stopped = !(rc_in(bp, CD180_MSVR) &
746 (MSVR_CTS|MSVR_DSR));
747 #else
748 port->COR2 |= COR2_CTSAE;
749 #endif
750 }
751 /* Enable Software Flow Control. FIXME: I'm not sure about this */
752 /* Some people reported that it works, but I still doubt */
753 if (I_IXON(tty)) {
754 port->COR2 |= COR2_TXIBE;
755 cor3 |= (COR3_FCT | COR3_SCDE);
756 if (I_IXANY(tty))
757 port->COR2 |= COR2_IXM;
758 rc_out(bp, CD180_SCHR1, START_CHAR(tty));
759 rc_out(bp, CD180_SCHR2, STOP_CHAR(tty));
760 rc_out(bp, CD180_SCHR3, START_CHAR(tty));
761 rc_out(bp, CD180_SCHR4, STOP_CHAR(tty));
762 }
763 if (!C_CLOCAL(tty)) {
764 /* Enable CD check */
765 port->IER |= IER_CD;
766 mcor1 |= MCOR1_CDZD;
767 mcor2 |= MCOR2_CDOD;
768 }
769
770 if (C_CREAD(tty))
771 /* Enable receiver */
772 port->IER |= IER_RXD;
773
774 /* Set input FIFO size (1-8 bytes) */
775 cor3 |= RISCOM_RXFIFO;
776 /* Setting up CD180 channel registers */
777 rc_out(bp, CD180_COR1, cor1);
778 rc_out(bp, CD180_COR2, port->COR2);
779 rc_out(bp, CD180_COR3, cor3);
780 /* Make CD180 know about registers change */
781 rc_wait_CCR(bp);
782 rc_out(bp, CD180_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
783 /* Setting up modem option registers */
784 rc_out(bp, CD180_MCOR1, mcor1);
785 rc_out(bp, CD180_MCOR2, mcor2);
786 /* Enable CD180 transmitter & receiver */
787 rc_wait_CCR(bp);
788 rc_out(bp, CD180_CCR, CCR_TXEN | CCR_RXEN);
789 /* Enable interrupts */
790 rc_out(bp, CD180_IER, port->IER);
791 /* And finally set RTS on */
792 rc_out(bp, CD180_MSVR, port->MSVR);
793 }
794
795 /* Must be called with interrupts enabled */
796 static int rc_activate_port(struct tty_port *port, struct tty_struct *tty)
797 {
798 struct riscom_port *rp = container_of(port, struct riscom_port, port);
799 struct riscom_board *bp = port_Board(rp);
800 unsigned long flags;
801
802 if (tty_port_alloc_xmit_buf(port) < 0)
803 return -ENOMEM;
804
805 spin_lock_irqsave(&riscom_lock, flags);
806
807 clear_bit(TTY_IO_ERROR, &tty->flags);
808 bp->count++;
809 rp->xmit_cnt = rp->xmit_head = rp->xmit_tail = 0;
810 rc_change_speed(tty, bp, rp);
811 spin_unlock_irqrestore(&riscom_lock, flags);
812 return 0;
813 }
814
815 /* Must be called with interrupts disabled */
816 static void rc_shutdown_port(struct tty_struct *tty,
817 struct riscom_board *bp, struct riscom_port *port)
818 {
819 #ifdef RC_REPORT_OVERRUN
820 printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n",
821 board_No(bp), port_No(port), port->overrun);
822 #endif
823 #ifdef RC_REPORT_FIFO
824 {
825 int i;
826
827 printk(KERN_INFO "rc%d: port %d: FIFO hits [ ",
828 board_No(bp), port_No(port));
829 for (i = 0; i < 10; i++)
830 printk("%ld ", port->hits[i]);
831 printk("].\n");
832 }
833 #endif
834 tty_port_free_xmit_buf(&port->port);
835
836 /* Select port */
837 rc_out(bp, CD180_CAR, port_No(port));
838 /* Reset port */
839 rc_wait_CCR(bp);
840 rc_out(bp, CD180_CCR, CCR_SOFTRESET);
841 /* Disable all interrupts from this port */
842 port->IER = 0;
843 rc_out(bp, CD180_IER, port->IER);
844
845 set_bit(TTY_IO_ERROR, &tty->flags);
846
847 if (--bp->count < 0) {
848 printk(KERN_INFO "rc%d: rc_shutdown_port: "
849 "bad board count: %d\n",
850 board_No(bp), bp->count);
851 bp->count = 0;
852 }
853 /*
854 * If this is the last opened port on the board
855 * shutdown whole board
856 */
857 if (!bp->count)
858 rc_shutdown_board(bp);
859 }
860
861 static int carrier_raised(struct tty_port *port)
862 {
863 struct riscom_port *p = container_of(port, struct riscom_port, port);
864 struct riscom_board *bp = port_Board(p);
865 unsigned long flags;
866 int CD;
867
868 spin_lock_irqsave(&riscom_lock, flags);
869 rc_out(bp, CD180_CAR, port_No(p));
870 CD = rc_in(bp, CD180_MSVR) & MSVR_CD;
871 rc_out(bp, CD180_MSVR, MSVR_RTS);
872 bp->DTR &= ~(1u << port_No(p));
873 rc_out(bp, RC_DTR, bp->DTR);
874 spin_unlock_irqrestore(&riscom_lock, flags);
875 return CD;
876 }
877
878 static void dtr_rts(struct tty_port *port, int onoff)
879 {
880 struct riscom_port *p = container_of(port, struct riscom_port, port);
881 struct riscom_board *bp = port_Board(p);
882 unsigned long flags;
883
884 spin_lock_irqsave(&riscom_lock, flags);
885 bp->DTR &= ~(1u << port_No(p));
886 if (onoff == 0)
887 bp->DTR |= (1u << port_No(p));
888 rc_out(bp, RC_DTR, bp->DTR);
889 spin_unlock_irqrestore(&riscom_lock, flags);
890 }
891
892 static int rc_open(struct tty_struct *tty, struct file *filp)
893 {
894 int board;
895 int error;
896 struct riscom_port *port;
897 struct riscom_board *bp;
898
899 board = RC_BOARD(tty->index);
900 if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT))
901 return -ENODEV;
902
903 bp = &rc_board[board];
904 port = rc_port + board * RC_NPORT + RC_PORT(tty->index);
905 if (rc_paranoia_check(port, tty->name, "rc_open"))
906 return -ENODEV;
907
908 error = rc_setup_board(bp);
909 if (error)
910 return error;
911
912 return tty_port_open(&port->port, tty, filp);
913 }
914
915 static void rc_flush_buffer(struct tty_struct *tty)
916 {
917 struct riscom_port *port = tty->driver_data;
918 unsigned long flags;
919
920 if (rc_paranoia_check(port, tty->name, "rc_flush_buffer"))
921 return;
922
923 spin_lock_irqsave(&riscom_lock, flags);
924 port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
925 spin_unlock_irqrestore(&riscom_lock, flags);
926
927 tty_wakeup(tty);
928 }
929
930 static void rc_close_port(struct tty_port *port)
931 {
932 unsigned long flags;
933 struct riscom_port *rp = container_of(port, struct riscom_port, port);
934 struct riscom_board *bp = port_Board(rp);
935 unsigned long timeout;
936
937 /*
938 * At this point we stop accepting input. To do this, we
939 * disable the receive line status interrupts, and tell the
940 * interrupt driver to stop checking the data ready bit in the
941 * line status register.
942 */
943
944 spin_lock_irqsave(&riscom_lock, flags);
945 rp->IER &= ~IER_RXD;
946
947 rp->IER &= ~IER_TXRDY;
948 rp->IER |= IER_TXEMPTY;
949 rc_out(bp, CD180_CAR, port_No(rp));
950 rc_out(bp, CD180_IER, rp->IER);
951 /*
952 * Before we drop DTR, make sure the UART transmitter
953 * has completely drained; this is especially
954 * important if there is a transmit FIFO!
955 */
956 timeout = jiffies + HZ;
957 while (rp->IER & IER_TXEMPTY) {
958 spin_unlock_irqrestore(&riscom_lock, flags);
959 msleep_interruptible(jiffies_to_msecs(rp->timeout));
960 spin_lock_irqsave(&riscom_lock, flags);
961 if (time_after(jiffies, timeout))
962 break;
963 }
964 rc_shutdown_port(port->tty, bp, rp);
965 spin_unlock_irqrestore(&riscom_lock, flags);
966 }
967
968 static void rc_close(struct tty_struct *tty, struct file *filp)
969 {
970 struct riscom_port *port = tty->driver_data;
971
972 if (!port || rc_paranoia_check(port, tty->name, "close"))
973 return;
974 tty_port_close(&port->port, tty, filp);
975 }
976
977 static int rc_write(struct tty_struct *tty,
978 const unsigned char *buf, int count)
979 {
980 struct riscom_port *port = tty->driver_data;
981 struct riscom_board *bp;
982 int c, total = 0;
983 unsigned long flags;
984
985 if (rc_paranoia_check(port, tty->name, "rc_write"))
986 return 0;
987
988 bp = port_Board(port);
989
990 while (1) {
991 spin_lock_irqsave(&riscom_lock, flags);
992
993 c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
994 SERIAL_XMIT_SIZE - port->xmit_head));
995 if (c <= 0)
996 break; /* lock continues to be held */
997
998 memcpy(port->port.xmit_buf + port->xmit_head, buf, c);
999 port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
1000 port->xmit_cnt += c;
1001
1002 spin_unlock_irqrestore(&riscom_lock, flags);
1003
1004 buf += c;
1005 count -= c;
1006 total += c;
1007 }
1008
1009 if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
1010 !(port->IER & IER_TXRDY)) {
1011 port->IER |= IER_TXRDY;
1012 rc_out(bp, CD180_CAR, port_No(port));
1013 rc_out(bp, CD180_IER, port->IER);
1014 }
1015
1016 spin_unlock_irqrestore(&riscom_lock, flags);
1017
1018 return total;
1019 }
1020
1021 static int rc_put_char(struct tty_struct *tty, unsigned char ch)
1022 {
1023 struct riscom_port *port = tty->driver_data;
1024 unsigned long flags;
1025 int ret = 0;
1026
1027 if (rc_paranoia_check(port, tty->name, "rc_put_char"))
1028 return 0;
1029
1030 spin_lock_irqsave(&riscom_lock, flags);
1031
1032 if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
1033 goto out;
1034
1035 port->port.xmit_buf[port->xmit_head++] = ch;
1036 port->xmit_head &= SERIAL_XMIT_SIZE - 1;
1037 port->xmit_cnt++;
1038 ret = 1;
1039
1040 out:
1041 spin_unlock_irqrestore(&riscom_lock, flags);
1042 return ret;
1043 }
1044
1045 static void rc_flush_chars(struct tty_struct *tty)
1046 {
1047 struct riscom_port *port = tty->driver_data;
1048 unsigned long flags;
1049
1050 if (rc_paranoia_check(port, tty->name, "rc_flush_chars"))
1051 return;
1052
1053 if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped)
1054 return;
1055
1056 spin_lock_irqsave(&riscom_lock, flags);
1057
1058 port->IER |= IER_TXRDY;
1059 rc_out(port_Board(port), CD180_CAR, port_No(port));
1060 rc_out(port_Board(port), CD180_IER, port->IER);
1061
1062 spin_unlock_irqrestore(&riscom_lock, flags);
1063 }
1064
1065 static int rc_write_room(struct tty_struct *tty)
1066 {
1067 struct riscom_port *port = tty->driver_data;
1068 int ret;
1069
1070 if (rc_paranoia_check(port, tty->name, "rc_write_room"))
1071 return 0;
1072
1073 ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
1074 if (ret < 0)
1075 ret = 0;
1076 return ret;
1077 }
1078
1079 static int rc_chars_in_buffer(struct tty_struct *tty)
1080 {
1081 struct riscom_port *port = tty->driver_data;
1082
1083 if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer"))
1084 return 0;
1085
1086 return port->xmit_cnt;
1087 }
1088
1089 static int rc_tiocmget(struct tty_struct *tty, struct file *file)
1090 {
1091 struct riscom_port *port = tty->driver_data;
1092 struct riscom_board *bp;
1093 unsigned char status;
1094 unsigned int result;
1095 unsigned long flags;
1096
1097 if (rc_paranoia_check(port, tty->name, __func__))
1098 return -ENODEV;
1099
1100 bp = port_Board(port);
1101
1102 spin_lock_irqsave(&riscom_lock, flags);
1103
1104 rc_out(bp, CD180_CAR, port_No(port));
1105 status = rc_in(bp, CD180_MSVR);
1106 result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG;
1107
1108 spin_unlock_irqrestore(&riscom_lock, flags);
1109
1110 result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0)
1111 | ((status & MSVR_DTR) ? TIOCM_DTR : 0)
1112 | ((status & MSVR_CD) ? TIOCM_CAR : 0)
1113 | ((status & MSVR_DSR) ? TIOCM_DSR : 0)
1114 | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
1115 return result;
1116 }
1117
1118 static int rc_tiocmset(struct tty_struct *tty, struct file *file,
1119 unsigned int set, unsigned int clear)
1120 {
1121 struct riscom_port *port = tty->driver_data;
1122 unsigned long flags;
1123 struct riscom_board *bp;
1124
1125 if (rc_paranoia_check(port, tty->name, __func__))
1126 return -ENODEV;
1127
1128 bp = port_Board(port);
1129
1130 spin_lock_irqsave(&riscom_lock, flags);
1131
1132 if (set & TIOCM_RTS)
1133 port->MSVR |= MSVR_RTS;
1134 if (set & TIOCM_DTR)
1135 bp->DTR &= ~(1u << port_No(port));
1136
1137 if (clear & TIOCM_RTS)
1138 port->MSVR &= ~MSVR_RTS;
1139 if (clear & TIOCM_DTR)
1140 bp->DTR |= (1u << port_No(port));
1141
1142 rc_out(bp, CD180_CAR, port_No(port));
1143 rc_out(bp, CD180_MSVR, port->MSVR);
1144 rc_out(bp, RC_DTR, bp->DTR);
1145
1146 spin_unlock_irqrestore(&riscom_lock, flags);
1147
1148 return 0;
1149 }
1150
1151 static int rc_send_break(struct tty_struct *tty, int length)
1152 {
1153 struct riscom_port *port = tty->driver_data;
1154 struct riscom_board *bp = port_Board(port);
1155 unsigned long flags;
1156
1157 if (length == 0 || length == -1)
1158 return -EOPNOTSUPP;
1159
1160 spin_lock_irqsave(&riscom_lock, flags);
1161
1162 port->break_length = RISCOM_TPS / HZ * length;
1163 port->COR2 |= COR2_ETC;
1164 port->IER |= IER_TXRDY;
1165 rc_out(bp, CD180_CAR, port_No(port));
1166 rc_out(bp, CD180_COR2, port->COR2);
1167 rc_out(bp, CD180_IER, port->IER);
1168 rc_wait_CCR(bp);
1169 rc_out(bp, CD180_CCR, CCR_CORCHG2);
1170 rc_wait_CCR(bp);
1171
1172 spin_unlock_irqrestore(&riscom_lock, flags);
1173 return 0;
1174 }
1175
1176 static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
1177 struct serial_struct __user *newinfo)
1178 {
1179 struct serial_struct tmp;
1180 struct riscom_board *bp = port_Board(port);
1181 int change_speed;
1182
1183 if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
1184 return -EFAULT;
1185
1186 change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
1187 (tmp.flags & ASYNC_SPD_MASK));
1188
1189 if (!capable(CAP_SYS_ADMIN)) {
1190 if ((tmp.close_delay != port->port.close_delay) ||
1191 (tmp.closing_wait != port->port.closing_wait) ||
1192 ((tmp.flags & ~ASYNC_USR_MASK) !=
1193 (port->port.flags & ~ASYNC_USR_MASK)))
1194 return -EPERM;
1195 port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
1196 (tmp.flags & ASYNC_USR_MASK));
1197 } else {
1198 port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
1199 (tmp.flags & ASYNC_FLAGS));
1200 port->port.close_delay = tmp.close_delay;
1201 port->port.closing_wait = tmp.closing_wait;
1202 }
1203 if (change_speed) {
1204 unsigned long flags;
1205
1206 spin_lock_irqsave(&riscom_lock, flags);
1207 rc_change_speed(tty, bp, port);
1208 spin_unlock_irqrestore(&riscom_lock, flags);
1209 }
1210 return 0;
1211 }
1212
1213 static int rc_get_serial_info(struct riscom_port *port,
1214 struct serial_struct __user *retinfo)
1215 {
1216 struct serial_struct tmp;
1217 struct riscom_board *bp = port_Board(port);
1218
1219 memset(&tmp, 0, sizeof(tmp));
1220 tmp.type = PORT_CIRRUS;
1221 tmp.line = port - rc_port;
1222 tmp.port = bp->base;
1223 tmp.irq = bp->irq;
1224 tmp.flags = port->port.flags;
1225 tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
1226 tmp.close_delay = port->port.close_delay * HZ/100;
1227 tmp.closing_wait = port->port.closing_wait * HZ/100;
1228 tmp.xmit_fifo_size = CD180_NFIFO;
1229 return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
1230 }
1231
1232 static int rc_ioctl(struct tty_struct *tty, struct file *filp,
1233 unsigned int cmd, unsigned long arg)
1234 {
1235 struct riscom_port *port = tty->driver_data;
1236 void __user *argp = (void __user *)arg;
1237 int retval;
1238
1239 if (rc_paranoia_check(port, tty->name, "rc_ioctl"))
1240 return -ENODEV;
1241
1242 switch (cmd) {
1243 case TIOCGSERIAL:
1244 lock_kernel();
1245 retval = rc_get_serial_info(port, argp);
1246 unlock_kernel();
1247 break;
1248 case TIOCSSERIAL:
1249 lock_kernel();
1250 retval = rc_set_serial_info(tty, port, argp);
1251 unlock_kernel();
1252 break;
1253 default:
1254 retval = -ENOIOCTLCMD;
1255 }
1256 return retval;
1257 }
1258
1259 static void rc_throttle(struct tty_struct *tty)
1260 {
1261 struct riscom_port *port = tty->driver_data;
1262 struct riscom_board *bp;
1263 unsigned long flags;
1264
1265 if (rc_paranoia_check(port, tty->name, "rc_throttle"))
1266 return;
1267 bp = port_Board(port);
1268
1269 spin_lock_irqsave(&riscom_lock, flags);
1270 port->MSVR &= ~MSVR_RTS;
1271 rc_out(bp, CD180_CAR, port_No(port));
1272 if (I_IXOFF(tty)) {
1273 rc_wait_CCR(bp);
1274 rc_out(bp, CD180_CCR, CCR_SSCH2);
1275 rc_wait_CCR(bp);
1276 }
1277 rc_out(bp, CD180_MSVR, port->MSVR);
1278 spin_unlock_irqrestore(&riscom_lock, flags);
1279 }
1280
1281 static void rc_unthrottle(struct tty_struct *tty)
1282 {
1283 struct riscom_port *port = tty->driver_data;
1284 struct riscom_board *bp;
1285 unsigned long flags;
1286
1287 if (rc_paranoia_check(port, tty->name, "rc_unthrottle"))
1288 return;
1289 bp = port_Board(port);
1290
1291 spin_lock_irqsave(&riscom_lock, flags);
1292 port->MSVR |= MSVR_RTS;
1293 rc_out(bp, CD180_CAR, port_No(port));
1294 if (I_IXOFF(tty)) {
1295 rc_wait_CCR(bp);
1296 rc_out(bp, CD180_CCR, CCR_SSCH1);
1297 rc_wait_CCR(bp);
1298 }
1299 rc_out(bp, CD180_MSVR, port->MSVR);
1300 spin_unlock_irqrestore(&riscom_lock, flags);
1301 }
1302
1303 static void rc_stop(struct tty_struct *tty)
1304 {
1305 struct riscom_port *port = tty->driver_data;
1306 struct riscom_board *bp;
1307 unsigned long flags;
1308
1309 if (rc_paranoia_check(port, tty->name, "rc_stop"))
1310 return;
1311
1312 bp = port_Board(port);
1313
1314 spin_lock_irqsave(&riscom_lock, flags);
1315 port->IER &= ~IER_TXRDY;
1316 rc_out(bp, CD180_CAR, port_No(port));
1317 rc_out(bp, CD180_IER, port->IER);
1318 spin_unlock_irqrestore(&riscom_lock, flags);
1319 }
1320
1321 static void rc_start(struct tty_struct *tty)
1322 {
1323 struct riscom_port *port = tty->driver_data;
1324 struct riscom_board *bp;
1325 unsigned long flags;
1326
1327 if (rc_paranoia_check(port, tty->name, "rc_start"))
1328 return;
1329
1330 bp = port_Board(port);
1331
1332 spin_lock_irqsave(&riscom_lock, flags);
1333
1334 if (port->xmit_cnt && port->port.xmit_buf && !(port->IER & IER_TXRDY)) {
1335 port->IER |= IER_TXRDY;
1336 rc_out(bp, CD180_CAR, port_No(port));
1337 rc_out(bp, CD180_IER, port->IER);
1338 }
1339 spin_unlock_irqrestore(&riscom_lock, flags);
1340 }
1341
1342 static void rc_hangup(struct tty_struct *tty)
1343 {
1344 struct riscom_port *port = tty->driver_data;
1345
1346 if (rc_paranoia_check(port, tty->name, "rc_hangup"))
1347 return;
1348
1349 tty_port_hangup(&port->port);
1350 }
1351
1352 static void rc_set_termios(struct tty_struct *tty,
1353 struct ktermios *old_termios)
1354 {
1355 struct riscom_port *port = tty->driver_data;
1356 unsigned long flags;
1357
1358 if (rc_paranoia_check(port, tty->name, "rc_set_termios"))
1359 return;
1360
1361 spin_lock_irqsave(&riscom_lock, flags);
1362 rc_change_speed(tty, port_Board(port), port);
1363 spin_unlock_irqrestore(&riscom_lock, flags);
1364
1365 if ((old_termios->c_cflag & CRTSCTS) &&
1366 !(tty->termios->c_cflag & CRTSCTS)) {
1367 tty->hw_stopped = 0;
1368 rc_start(tty);
1369 }
1370 }
1371
1372 static const struct tty_operations riscom_ops = {
1373 .open = rc_open,
1374 .close = rc_close,
1375 .write = rc_write,
1376 .put_char = rc_put_char,
1377 .flush_chars = rc_flush_chars,
1378 .write_room = rc_write_room,
1379 .chars_in_buffer = rc_chars_in_buffer,
1380 .flush_buffer = rc_flush_buffer,
1381 .ioctl = rc_ioctl,
1382 .throttle = rc_throttle,
1383 .unthrottle = rc_unthrottle,
1384 .set_termios = rc_set_termios,
1385 .stop = rc_stop,
1386 .start = rc_start,
1387 .hangup = rc_hangup,
1388 .tiocmget = rc_tiocmget,
1389 .tiocmset = rc_tiocmset,
1390 .break_ctl = rc_send_break,
1391 };
1392
1393 static const struct tty_port_operations riscom_port_ops = {
1394 .carrier_raised = carrier_raised,
1395 .dtr_rts = dtr_rts,
1396 .shutdown = rc_close_port,
1397 .activate = rc_activate_port,
1398 };
1399
1400
1401 static int __init rc_init_drivers(void)
1402 {
1403 int error;
1404 int i;
1405
1406 riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT);
1407 if (!riscom_driver)
1408 return -ENOMEM;
1409
1410 riscom_driver->owner = THIS_MODULE;
1411 riscom_driver->name = "ttyL";
1412 riscom_driver->major = RISCOM8_NORMAL_MAJOR;
1413 riscom_driver->type = TTY_DRIVER_TYPE_SERIAL;
1414 riscom_driver->subtype = SERIAL_TYPE_NORMAL;
1415 riscom_driver->init_termios = tty_std_termios;
1416 riscom_driver->init_termios.c_cflag =
1417 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1418 riscom_driver->init_termios.c_ispeed = 9600;
1419 riscom_driver->init_termios.c_ospeed = 9600;
1420 riscom_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK;
1421 tty_set_operations(riscom_driver, &riscom_ops);
1422 error = tty_register_driver(riscom_driver);
1423 if (error != 0) {
1424 put_tty_driver(riscom_driver);
1425 printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, "
1426 "error = %d\n", error);
1427 return 1;
1428 }
1429 memset(rc_port, 0, sizeof(rc_port));
1430 for (i = 0; i < RC_NPORT * RC_NBOARD; i++) {
1431 tty_port_init(&rc_port[i].port);
1432 rc_port[i].port.ops = &riscom_port_ops;
1433 rc_port[i].magic = RISCOM8_MAGIC;
1434 }
1435 return 0;
1436 }
1437
1438 static void rc_release_drivers(void)
1439 {
1440 tty_unregister_driver(riscom_driver);
1441 put_tty_driver(riscom_driver);
1442 }
1443
1444 #ifndef MODULE
1445 /*
1446 * Called at boot time.
1447 *
1448 * You can specify IO base for up to RC_NBOARD cards,
1449 * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt.
1450 * Note that there will be no probing at default
1451 * addresses in this case.
1452 *
1453 */
1454 static int __init riscom8_setup(char *str)
1455 {
1456 int ints[RC_NBOARD];
1457 int i;
1458
1459 str = get_options(str, ARRAY_SIZE(ints), ints);
1460
1461 for (i = 0; i < RC_NBOARD; i++) {
1462 if (i < ints[0])
1463 rc_board[i].base = ints[i+1];
1464 else
1465 rc_board[i].base = 0;
1466 }
1467 return 1;
1468 }
1469
1470 __setup("riscom8=", riscom8_setup);
1471 #endif
1472
1473 static char banner[] __initdata =
1474 KERN_INFO "rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin "
1475 "1994-1996.\n";
1476 static char no_boards_msg[] __initdata =
1477 KERN_INFO "rc: No RISCom/8 boards detected.\n";
1478
1479 /*
1480 * This routine must be called by kernel at boot time
1481 */
1482 static int __init riscom8_init(void)
1483 {
1484 int i;
1485 int found = 0;
1486
1487 printk(banner);
1488
1489 if (rc_init_drivers())
1490 return -EIO;
1491
1492 for (i = 0; i < RC_NBOARD; i++)
1493 if (rc_board[i].base && !rc_probe(&rc_board[i]))
1494 found++;
1495 if (!found) {
1496 rc_release_drivers();
1497 printk(no_boards_msg);
1498 return -EIO;
1499 }
1500 return 0;
1501 }
1502
1503 #ifdef MODULE
1504 static int iobase;
1505 static int iobase1;
1506 static int iobase2;
1507 static int iobase3;
1508 module_param(iobase, int, 0);
1509 module_param(iobase1, int, 0);
1510 module_param(iobase2, int, 0);
1511 module_param(iobase3, int, 0);
1512
1513 MODULE_LICENSE("GPL");
1514 MODULE_ALIAS_CHARDEV_MAJOR(RISCOM8_NORMAL_MAJOR);
1515 #endif /* MODULE */
1516
1517 /*
1518 * You can setup up to 4 boards (current value of RC_NBOARD)
1519 * by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter.
1520 *
1521 */
1522 static int __init riscom8_init_module(void)
1523 {
1524 #ifdef MODULE
1525 int i;
1526
1527 if (iobase || iobase1 || iobase2 || iobase3) {
1528 for (i = 0; i < RC_NBOARD; i++)
1529 rc_board[i].base = 0;
1530 }
1531
1532 if (iobase)
1533 rc_board[0].base = iobase;
1534 if (iobase1)
1535 rc_board[1].base = iobase1;
1536 if (iobase2)
1537 rc_board[2].base = iobase2;
1538 if (iobase3)
1539 rc_board[3].base = iobase3;
1540 #endif /* MODULE */
1541
1542 return riscom8_init();
1543 }
1544
1545 static void __exit riscom8_exit_module(void)
1546 {
1547 int i;
1548
1549 rc_release_drivers();
1550 for (i = 0; i < RC_NBOARD; i++)
1551 if (rc_board[i].flags & RC_BOARD_PRESENT)
1552 rc_release_io_range(&rc_board[i]);
1553
1554 }
1555
1556 module_init(riscom8_init_module);
1557 module_exit(riscom8_exit_module);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree