drivers/usb/wusbcore/wusbhc.c

   1 /*
   2  * Wireless USB Host Controller
   3  * sysfs glue, wusbcore module support and life cycle management
   4  *
   5  *
   6  * Copyright (C) 2005-2006 Intel Corporation
   7  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License version
  11  * 2 as published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  21  * 02110-1301, USA.
  22  *
  23  *
  24  * Creation/destruction of wusbhc is split in two parts; that that
  25  * doesn't require the HCD to be added (wusbhc_{create,destroy}) and
  26  * the one that requires (phase B, wusbhc_b_{create,destroy}).
  27  *
  28  * This is so because usb_add_hcd() will start the HC, and thus, all
  29  * the HC specific stuff has to be already initialiazed (like sysfs
  30  * thingies).
  31  */
  32 #include <linux/device.h>
  33 #include <linux/module.h>
  34 #include "wusbhc.h"
  35
  36 /**
  37  * Extract the wusbhc that corresponds to a USB Host Controller class device
  38  *
  39  * WARNING! Apply only if @dev is that of a
  40  *          wusbhc.usb_hcd.self->class_dev; otherwise, you loose.
  41  */
  42 static struct wusbhc *usbhc_dev_to_wusbhc(struct device *dev)
  43 {
  44         struct usb_bus *usb_bus = dev_get_drvdata(dev);
  45         struct usb_hcd *usb_hcd = bus_to_hcd(usb_bus);
  46         return usb_hcd_to_wusbhc(usb_hcd);
  47 }
  48
  49 /*
  50  * Show & store the current WUSB trust timeout
  51  *
  52  * We don't do locking--it is an 'atomic' value.
  53  *
  54  * The units that we store/show are always MILLISECONDS. However, the
  55  * value of trust_timeout is jiffies.
  56  */
  57 static ssize_t wusb_trust_timeout_show(struct device *dev,
  58                                        struct device_attribute *attr, char *buf)
  59 {
  60         struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
  61
  62         return scnprintf(buf, PAGE_SIZE, "%u\n", wusbhc->trust_timeout);
  63 }
  64
  65 static ssize_t wusb_trust_timeout_store(struct device *dev,
  66                                         struct device_attribute *attr,
  67                                         const char *buf, size_t size)
  68 {
  69         struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
  70         ssize_t result = -ENOSYS;
  71         unsigned trust_timeout;
  72
  73         result = sscanf(buf, "%u", &trust_timeout);
  74         if (result != 1) {
  75                 result = -EINVAL;
  76                 goto out;
  77         }
  78         /* FIXME: maybe we should check for range validity? */
  79         wusbhc->trust_timeout = trust_timeout;
  80         cancel_delayed_work(&wusbhc->keep_alive_timer);
  81         flush_workqueue(wusbd);
  82         queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
  83                            (trust_timeout * CONFIG_HZ)/1000/2);
  84 out:
  85         return result < 0 ? result : size;
  86 }
  87 static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show,
  88                                              wusb_trust_timeout_store);
  89
  90 /*
  91  * Show & store the current WUSB CHID
  92  */
  93 static ssize_t wusb_chid_show(struct device *dev,
  94                               struct device_attribute *attr, char *buf)
  95 {
  96         struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
  97         ssize_t result = 0;
  98
  99         if (wusbhc->wuie_host_info != NULL)
 100                 result += ckhdid_printf(buf, PAGE_SIZE,
 101                                         &wusbhc->wuie_host_info->CHID);
 102         return result;
 103 }
 104
 105 /*
 106  * Store a new CHID
 107  *
 108  * This will (FIXME) trigger many changes.
 109  *
 110  * - Send an all zeros CHID and it will stop the controller
 111  * - Send a non-zero CHID and it will start it
 112  *   (unless it was started, it will just change the CHID,
 113  *   diconnecting all devices first).
 114  *
 115  * So first we scan the MMC we are sent and then we act on it.  We
 116  * read it in the same format as we print it, an ASCII string of 16
 117  * hex bytes.
 118  *
 119  * See wusbhc_chid_set() for more info.
 120  */
 121 static ssize_t wusb_chid_store(struct device *dev,
 122                                struct device_attribute *attr,
 123                                const char *buf, size_t size)
 124 {
 125         struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
 126         struct wusb_ckhdid chid;
 127         ssize_t result;
 128
 129         result = sscanf(buf,
 130                         "%02hhx %02hhx %02hhx %02hhx "
 131                         "%02hhx %02hhx %02hhx %02hhx "
 132                         "%02hhx %02hhx %02hhx %02hhx "
 133                         "%02hhx %02hhx %02hhx %02hhx\n",
 134                         &chid.data[0] , &chid.data[1] ,
 135                         &chid.data[2] , &chid.data[3] ,
 136                         &chid.data[4] , &chid.data[5] ,
 137                         &chid.data[6] , &chid.data[7] ,
 138                         &chid.data[8] , &chid.data[9] ,
 139                         &chid.data[10], &chid.data[11],
 140                         &chid.data[12], &chid.data[13],
 141                         &chid.data[14], &chid.data[15]);
 142         if (result != 16) {
 143                 dev_err(dev, "Unrecognized CHID (need 16 8-bit hex digits): "
 144                         "%d\n", (int)result);
 145                 return -EINVAL;
 146         }
 147         result = wusbhc_chid_set(wusbhc, &chid);
 148         return result < 0 ? result : size;
 149 }
 150 static DEVICE_ATTR(wusb_chid, 0644, wusb_chid_show, wusb_chid_store);
 151
 152 /* Group all the WUSBHC attributes */
 153 static struct attribute *wusbhc_attrs[] = {
 154                 &dev_attr_wusb_trust_timeout.attr,
 155                 &dev_attr_wusb_chid.attr,
 156                 NULL,
 157 };
 158
 159 static struct attribute_group wusbhc_attr_group = {
 160         .name = NULL,   /* we want them in the same directory */
 161         .attrs = wusbhc_attrs,
 162 };
 163
 164 /*
 165  * Create a wusbhc instance
 166  *
 167  * NOTEs:
 168  *
 169  *  - assumes *wusbhc has been zeroed and wusbhc->usb_hcd has been
 170  *    initialized but not added.
 171  *
 172  *  - fill out ports_max, mmcies_max and mmcie_{add,rm} before calling.
 173  *
 174  *  - fill out wusbhc->uwb_rc and refcount it before calling
 175  *  - fill out the wusbhc->sec_modes array
 176  */
 177 int wusbhc_create(struct wusbhc *wusbhc)
 178 {
 179         int result = 0;
 180
 181         wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS;
 182         mutex_init(&wusbhc->mutex);
 183         result = wusbhc_mmcie_create(wusbhc);
 184         if (result < 0)
 185                 goto error_mmcie_create;
 186         result = wusbhc_devconnect_create(wusbhc);
 187         if (result < 0)
 188                 goto error_devconnect_create;
 189         result = wusbhc_rh_create(wusbhc);
 190         if (result < 0)
 191                 goto error_rh_create;
 192         result = wusbhc_sec_create(wusbhc);
 193         if (result < 0)
 194                 goto error_sec_create;
 195         return 0;
 196
 197 error_sec_create:
 198         wusbhc_rh_destroy(wusbhc);
 199 error_rh_create:
 200         wusbhc_devconnect_destroy(wusbhc);
 201 error_devconnect_create:
 202         wusbhc_mmcie_destroy(wusbhc);
 203 error_mmcie_create:
 204         return result;
 205 }
 206 EXPORT_SYMBOL_GPL(wusbhc_create);
 207
 208 static inline struct kobject *wusbhc_kobj(struct wusbhc *wusbhc)
 209 {
 210         return &wusbhc->usb_hcd.self.controller->kobj;
 211 }
 212
 213 /*
 214  * Phase B of a wusbhc instance creation
 215  *
 216  * Creates fields that depend on wusbhc->usb_hcd having been
 217  * added. This is where we create the sysfs files in
 218  * /sys/class/usb_host/usb_hostX/.
 219  *
 220  * NOTE: Assumes wusbhc->usb_hcd has been already added by the upper
 221  *       layer (hwahc or whci)
 222  */
 223 int wusbhc_b_create(struct wusbhc *wusbhc)
 224 {
 225         int result = 0;
 226         struct device *dev = wusbhc->usb_hcd.self.controller;
 227
 228         result = sysfs_create_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
 229         if (result < 0) {
 230                 dev_err(dev, "Cannot register WUSBHC attributes: %d\n", result);
 231                 goto error_create_attr_group;
 232         }
 233
 234         result = wusbhc_pal_register(wusbhc);
 235         if (result < 0)
 236                 goto error_pal_register;
 237         return 0;
 238
 239 error_pal_register:
 240         sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
 241 error_create_attr_group:
 242         return result;
 243 }
 244 EXPORT_SYMBOL_GPL(wusbhc_b_create);
 245
 246 void wusbhc_b_destroy(struct wusbhc *wusbhc)
 247 {
 248         wusbhc_pal_unregister(wusbhc);
 249         sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
 250 }
 251 EXPORT_SYMBOL_GPL(wusbhc_b_destroy);
 252
 253 void wusbhc_destroy(struct wusbhc *wusbhc)
 254 {
 255         wusbhc_sec_destroy(wusbhc);
 256         wusbhc_rh_destroy(wusbhc);
 257         wusbhc_devconnect_destroy(wusbhc);
 258         wusbhc_mmcie_destroy(wusbhc);
 259 }
 260 EXPORT_SYMBOL_GPL(wusbhc_destroy);
 261
 262 struct workqueue_struct *wusbd;
 263 EXPORT_SYMBOL_GPL(wusbd);
 264
 265 /*
 266  * WUSB Cluster ID allocation map
 267  *
 268  * Each WUSB bus in a channel is identified with a Cluster Id in the
 269  * unauth address pace (WUSB1.0[4.3]). We take the range 0xe0 to 0xff
 270  * (that's space for 31 WUSB controllers, as 0xff can't be taken). We
 271  * start taking from 0xff, 0xfe, 0xfd... (hence the += or -= 0xff).
 272  *
 273  * For each one we taken, we pin it in the bitap
 274  */
 275 #define CLUSTER_IDS 32
 276 static DECLARE_BITMAP(wusb_cluster_id_table, CLUSTER_IDS);
 277 static DEFINE_SPINLOCK(wusb_cluster_ids_lock);
 278
 279 /*
 280  * Get a WUSB Cluster ID
 281  *
 282  * Need to release with wusb_cluster_id_put() when done w/ it.
 283  */
 284 /* FIXME: coordinate with the choose_addres() from the USB stack */
 285 /* we want to leave the top of the 128 range for cluster addresses and
 286  * the bottom for device addresses (as we map them one on one with
 287  * ports). */
 288 u8 wusb_cluster_id_get(void)
 289 {
 290         u8 id;
 291         spin_lock(&wusb_cluster_ids_lock);
 292         id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS);
 293         if (id > CLUSTER_IDS) {
 294                 id = 0;
 295                 goto out;
 296         }
 297         set_bit(id, wusb_cluster_id_table);
 298         id = (u8) 0xff - id;
 299 out:
 300         spin_unlock(&wusb_cluster_ids_lock);
 301         return id;
 302
 303 }
 304 EXPORT_SYMBOL_GPL(wusb_cluster_id_get);
 305
 306 /*
 307  * Release a WUSB Cluster ID
 308  *
 309  * Obtained it with wusb_cluster_id_get()
 310  */
 311 void wusb_cluster_id_put(u8 id)
 312 {
 313         id = 0xff - id;
 314         BUG_ON(id >= CLUSTER_IDS);
 315         spin_lock(&wusb_cluster_ids_lock);
 316         WARN_ON(!test_bit(id, wusb_cluster_id_table));
 317         clear_bit(id, wusb_cluster_id_table);
 318         spin_unlock(&wusb_cluster_ids_lock);
 319 }
 320 EXPORT_SYMBOL_GPL(wusb_cluster_id_put);
 321
 322 /**
 323  * wusbhc_giveback_urb - return an URB to the USB core
 324  * @wusbhc: the host controller the URB is from.
 325  * @urb:    the URB.
 326  * @status: the URB's status.
 327  *
 328  * Return an URB to the USB core doing some additional WUSB specific
 329  * processing.
 330  *
 331  *  - After a successful transfer, update the trust timeout timestamp
 332  *    for the WUSB device.
 333  *
 334  *  - [WUSB] sections 4.13 and 7.5.1 specifies the stop retrasmittion
 335  *    condition for the WCONNECTACK_IE is that the host has observed
 336  *    the associated device responding to a control transfer.
 337  */
 338 void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status)
 339 {
 340         struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
 341
 342         if (status == 0 && wusb_dev) {
 343                 wusb_dev->entry_ts = jiffies;
 344
 345                 /* wusbhc_devconnect_acked() can't be called from
 346                    atomic context so defer it to a work queue. */
 347                 if (!list_empty(&wusb_dev->cack_node))
 348                         queue_work(wusbd, &wusb_dev->devconnect_acked_work);
 349                 else
 350                         wusb_dev_put(wusb_dev);
 351         }
 352
 353         usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status);
 354 }
 355 EXPORT_SYMBOL_GPL(wusbhc_giveback_urb);
 356
 357 /**
 358  * wusbhc_reset_all - reset the HC hardware
 359  * @wusbhc: the host controller to reset.
 360  *
 361  * Request a full hardware reset of the chip.  This will also reset
 362  * the radio controller and any other PALs.
 363  */
 364 void wusbhc_reset_all(struct wusbhc *wusbhc)
 365 {
 366         uwb_rc_reset_all(wusbhc->uwb_rc);
 367 }
 368 EXPORT_SYMBOL_GPL(wusbhc_reset_all);
 369
 370 static struct notifier_block wusb_usb_notifier = {
 371         .notifier_call = wusb_usb_ncb,
 372         .priority = INT_MAX     /* Need to be called first of all */
 373 };
 374
 375 static int __init wusbcore_init(void)
 376 {
 377         int result;
 378         result = wusb_crypto_init();
 379         if (result < 0)
 380                 goto error_crypto_init;
 381         /* WQ is singlethread because we need to serialize notifications */
 382         wusbd = create_singlethread_workqueue("wusbd");
 383         if (wusbd == NULL) {
 384                 result = -ENOMEM;
 385                 printk(KERN_ERR "WUSB-core: Cannot create wusbd workqueue\n");
 386                 goto error_wusbd_create;
 387         }
 388         usb_register_notify(&wusb_usb_notifier);
 389         bitmap_zero(wusb_cluster_id_table, CLUSTER_IDS);
 390         set_bit(0, wusb_cluster_id_table);      /* reserve Cluster ID 0xff */
 391         return 0;
 392
 393 error_wusbd_create:
 394         wusb_crypto_exit();
 395 error_crypto_init:
 396         return result;
 397
 398 }
 399 module_init(wusbcore_init);
 400
 401 static void __exit wusbcore_exit(void)
 402 {
 403         clear_bit(0, wusb_cluster_id_table);
 404         if (!bitmap_empty(wusb_cluster_id_table, CLUSTER_IDS)) {
 405                 char buf[256];
 406                 bitmap_scnprintf(buf, sizeof(buf), wusb_cluster_id_table,
 407                                  CLUSTER_IDS);
 408                 printk(KERN_ERR "BUG: WUSB Cluster IDs not released "
 409                        "on exit: %s\n", buf);
 410                 WARN_ON(1);
 411         }
 412         usb_unregister_notify(&wusb_usb_notifier);
 413         destroy_workqueue(wusbd);
 414         wusb_crypto_exit();
 415 }
 416 module_exit(wusbcore_exit);
 417
 418 MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
 419 MODULE_DESCRIPTION("Wireless USB core");
 420 MODULE_LICENSE("GPL");