drivers/net/wireless/rt2x00/rt2800pci.c

   1 /*
   2         Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
   3         Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
   4         Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
   5         Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
   6         Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
   7         Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
   8         Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
   9         Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com>
  10         <http://rt2x00.serialmonkey.com>
  11
  12         This program is free software; you can redistribute it and/or modify
  13         it under the terms of the GNU General Public License as published by
  14         the Free Software Foundation; either version 2 of the License, or
  15         (at your option) any later version.
  16
  17         This program is distributed in the hope that it will be useful,
  18         but WITHOUT ANY WARRANTY; without even the implied warranty of
  19         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  20         GNU General Public License for more details.
  21
  22         You should have received a copy of the GNU General Public License
  23         along with this program; if not, write to the
  24         Free Software Foundation, Inc.,
  25         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  26  */
  27
  28 /*
  29         Module: rt2800pci
  30         Abstract: rt2800pci device specific routines.
  31         Supported chipsets: RT2800E & RT2800ED.
  32  */
  33
  34 #include <linux/delay.h>
  35 #include <linux/etherdevice.h>
  36 #include <linux/init.h>
  37 #include <linux/kernel.h>
  38 #include <linux/module.h>
  39 #include <linux/pci.h>
  40 #include <linux/platform_device.h>
  41 #include <linux/eeprom_93cx6.h>
  42
  43 #include "rt2x00.h"
  44 #include "rt2x00pci.h"
  45 #include "rt2x00soc.h"
  46 #include "rt2800lib.h"
  47 #include "rt2800.h"
  48 #include "rt2800pci.h"
  49
  50 /*
  51  * Allow hardware encryption to be disabled.
  52  */
  53 static int modparam_nohwcrypt = 0;
  54 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
  55 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  56
  57 static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
  58 {
  59         unsigned int i;
  60         u32 reg;
  61
  62         /*
  63          * SOC devices don't support MCU requests.
  64          */
  65         if (rt2x00_is_soc(rt2x00dev))
  66                 return;
  67
  68         for (i = 0; i < 200; i++) {
  69                 rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, &reg);
  70
  71                 if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) ||
  72                     (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) ||
  73                     (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) ||
  74                     (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token))
  75                         break;
  76
  77                 udelay(REGISTER_BUSY_DELAY);
  78         }
  79
  80         if (i == 200)
  81                 ERROR(rt2x00dev, "MCU request failed, no response from hardware\n");
  82
  83         rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
  84         rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
  85 }
  86
  87 #if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
  88 static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
  89 {
  90         void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
  91
  92         memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
  93
  94         iounmap(base_addr);
  95 }
  96 #else
  97 static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
  98 {
  99 }
 100 #endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
 101
 102 #ifdef CONFIG_PCI
 103 static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 104 {
 105         struct rt2x00_dev *rt2x00dev = eeprom->data;
 106         u32 reg;
 107
 108         rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
 109
 110         eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
 111         eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
 112         eeprom->reg_data_clock =
 113             !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
 114         eeprom->reg_chip_select =
 115             !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
 116 }
 117
 118 static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
 119 {
 120         struct rt2x00_dev *rt2x00dev = eeprom->data;
 121         u32 reg = 0;
 122
 123         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
 124         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
 125         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK,
 126                            !!eeprom->reg_data_clock);
 127         rt2x00_set_field32(&reg, E2PROM_CSR_CHIP_SELECT,
 128                            !!eeprom->reg_chip_select);
 129
 130         rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
 131 }
 132
 133 static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
 134 {
 135         struct eeprom_93cx6 eeprom;
 136         u32 reg;
 137
 138         rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
 139
 140         eeprom.data = rt2x00dev;
 141         eeprom.register_read = rt2800pci_eepromregister_read;
 142         eeprom.register_write = rt2800pci_eepromregister_write;
 143         switch (rt2x00_get_field32(reg, E2PROM_CSR_TYPE))
 144         {
 145         case 0:
 146                 eeprom.width = PCI_EEPROM_WIDTH_93C46;
 147                 break;
 148         case 1:
 149                 eeprom.width = PCI_EEPROM_WIDTH_93C66;
 150                 break;
 151         default:
 152                 eeprom.width = PCI_EEPROM_WIDTH_93C86;
 153                 break;
 154         }
 155         eeprom.reg_data_in = 0;
 156         eeprom.reg_data_out = 0;
 157         eeprom.reg_data_clock = 0;
 158         eeprom.reg_chip_select = 0;
 159
 160         eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
 161                                EEPROM_SIZE / sizeof(u16));
 162 }
 163
 164 static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev)
 165 {
 166         return rt2800_efuse_detect(rt2x00dev);
 167 }
 168
 169 static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
 170 {
 171         rt2800_read_eeprom_efuse(rt2x00dev);
 172 }
 173 #else
 174 static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
 175 {
 176 }
 177
 178 static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev)
 179 {
 180         return 0;
 181 }
 182
 183 static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
 184 {
 185 }
 186 #endif /* CONFIG_PCI */
 187
 188 /*
 189  * Queue handlers.
 190  */
 191 static void rt2800pci_start_queue(struct data_queue *queue)
 192 {
 193         struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
 194         u32 reg;
 195
 196         switch (queue->qid) {
 197         case QID_RX:
 198                 rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 199                 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
 200                 rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 201                 break;
 202         case QID_BEACON:
 203                 rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 204                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
 205                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
 206                 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
 207                 rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 208
 209                 rt2x00pci_register_read(rt2x00dev, INT_TIMER_EN, &reg);
 210                 rt2x00_set_field32(&reg, INT_TIMER_EN_PRE_TBTT_TIMER, 1);
 211                 rt2x00pci_register_write(rt2x00dev, INT_TIMER_EN, reg);
 212                 break;
 213         default:
 214                 break;
 215         }
 216 }
 217
 218 static void rt2800pci_kick_queue(struct data_queue *queue)
 219 {
 220         struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
 221         struct queue_entry *entry;
 222
 223         switch (queue->qid) {
 224         case QID_AC_VO:
 225         case QID_AC_VI:
 226         case QID_AC_BE:
 227         case QID_AC_BK:
 228                 entry = rt2x00queue_get_entry(queue, Q_INDEX);
 229                 rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(queue->qid),
 230                                          entry->entry_idx);
 231                 break;
 232         case QID_MGMT:
 233                 entry = rt2x00queue_get_entry(queue, Q_INDEX);
 234                 rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(5),
 235                                          entry->entry_idx);
 236                 break;
 237         default:
 238                 break;
 239         }
 240 }
 241
 242 static void rt2800pci_stop_queue(struct data_queue *queue)
 243 {
 244         struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
 245         u32 reg;
 246
 247         switch (queue->qid) {
 248         case QID_RX:
 249                 rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 250                 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
 251                 rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 252                 break;
 253         case QID_BEACON:
 254                 rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 255                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
 256                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
 257                 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
 258                 rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 259
 260                 rt2x00pci_register_read(rt2x00dev, INT_TIMER_EN, &reg);
 261                 rt2x00_set_field32(&reg, INT_TIMER_EN_PRE_TBTT_TIMER, 0);
 262                 rt2x00pci_register_write(rt2x00dev, INT_TIMER_EN, reg);
 263
 264                 /*
 265                  * Wait for current invocation to finish. The tasklet
 266                  * won't be scheduled anymore afterwards since we disabled
 267                  * the TBTT and PRE TBTT timer.
 268                  */
 269                 tasklet_kill(&rt2x00dev->tbtt_tasklet);
 270                 tasklet_kill(&rt2x00dev->pretbtt_tasklet);
 271
 272                 break;
 273         default:
 274                 break;
 275         }
 276 }
 277
 278 /*
 279  * Firmware functions
 280  */
 281 static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 282 {
 283         return FIRMWARE_RT2860;
 284 }
 285
 286 static int rt2800pci_write_firmware(struct rt2x00_dev *rt2x00dev,
 287                                     const u8 *data, const size_t len)
 288 {
 289         u32 reg;
 290
 291         /*
 292          * enable Host program ram write selection
 293          */
 294         reg = 0;
 295         rt2x00_set_field32(&reg, PBF_SYS_CTRL_HOST_RAM_WRITE, 1);
 296         rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
 297
 298         /*
 299          * Write firmware to device.
 300          */
 301         rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
 302                                       data, len);
 303
 304         rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
 305         rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
 306
 307         rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
 308         rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 309
 310         return 0;
 311 }
 312
 313 /*
 314  * Initialization functions.
 315  */
 316 static bool rt2800pci_get_entry_state(struct queue_entry *entry)
 317 {
 318         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 319         u32 word;
 320
 321         if (entry->queue->qid == QID_RX) {
 322                 rt2x00_desc_read(entry_priv->desc, 1, &word);
 323
 324                 return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE));
 325         } else {
 326                 rt2x00_desc_read(entry_priv->desc, 1, &word);
 327
 328                 return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE));
 329         }
 330 }
 331
 332 static void rt2800pci_clear_entry(struct queue_entry *entry)
 333 {
 334         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 335         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 336         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 337         u32 word;
 338
 339         if (entry->queue->qid == QID_RX) {
 340                 rt2x00_desc_read(entry_priv->desc, 0, &word);
 341                 rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma);
 342                 rt2x00_desc_write(entry_priv->desc, 0, word);
 343
 344                 rt2x00_desc_read(entry_priv->desc, 1, &word);
 345                 rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0);
 346                 rt2x00_desc_write(entry_priv->desc, 1, word);
 347
 348                 /*
 349                  * Set RX IDX in register to inform hardware that we have
 350                  * handled this entry and it is available for reuse again.
 351                  */
 352                 rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX,
 353                                       entry->entry_idx);
 354         } else {
 355                 rt2x00_desc_read(entry_priv->desc, 1, &word);
 356                 rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1);
 357                 rt2x00_desc_write(entry_priv->desc, 1, word);
 358         }
 359 }
 360
 361 static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
 362 {
 363         struct queue_entry_priv_pci *entry_priv;
 364         u32 reg;
 365
 366         /*
 367          * Initialize registers.
 368          */
 369         entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
 370         rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma);
 371         rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT0,
 372                                  rt2x00dev->tx[0].limit);
 373         rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX0, 0);
 374         rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX0, 0);
 375
 376         entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
 377         rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma);
 378         rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT1,
 379                                  rt2x00dev->tx[1].limit);
 380         rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX1, 0);
 381         rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX1, 0);
 382
 383         entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
 384         rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma);
 385         rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT2,
 386                                  rt2x00dev->tx[2].limit);
 387         rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX2, 0);
 388         rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX2, 0);
 389
 390         entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
 391         rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma);
 392         rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT3,
 393                                  rt2x00dev->tx[3].limit);
 394         rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX3, 0);
 395         rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX3, 0);
 396
 397         entry_priv = rt2x00dev->rx->entries[0].priv_data;
 398         rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
 399         rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT,
 400                                  rt2x00dev->rx[0].limit);
 401         rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX,
 402                                  rt2x00dev->rx[0].limit - 1);
 403         rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
 404
 405         /*
 406          * Enable global DMA configuration
 407          */
 408         rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 409         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
 410         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
 411         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
 412         rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 413
 414         rt2x00pci_register_write(rt2x00dev, DELAY_INT_CFG, 0);
 415
 416         return 0;
 417 }
 418
 419 /*
 420  * Device state switch handlers.
 421  */
 422 static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 423                                  enum dev_state state)
 424 {
 425         int mask = (state == STATE_RADIO_IRQ_ON);
 426         u32 reg;
 427         unsigned long flags;
 428
 429         /*
 430          * When interrupts are being enabled, the interrupt registers
 431          * should clear the register to assure a clean state.
 432          */
 433         if (state == STATE_RADIO_IRQ_ON) {
 434                 rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
 435                 rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
 436         }
 437
 438         spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
 439         rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, &reg);
 440         rt2x00_set_field32(&reg, INT_MASK_CSR_RXDELAYINT, 0);
 441         rt2x00_set_field32(&reg, INT_MASK_CSR_TXDELAYINT, 0);
 442         rt2x00_set_field32(&reg, INT_MASK_CSR_RX_DONE, mask);
 443         rt2x00_set_field32(&reg, INT_MASK_CSR_AC0_DMA_DONE, 0);
 444         rt2x00_set_field32(&reg, INT_MASK_CSR_AC1_DMA_DONE, 0);
 445         rt2x00_set_field32(&reg, INT_MASK_CSR_AC2_DMA_DONE, 0);
 446         rt2x00_set_field32(&reg, INT_MASK_CSR_AC3_DMA_DONE, 0);
 447         rt2x00_set_field32(&reg, INT_MASK_CSR_HCCA_DMA_DONE, 0);
 448         rt2x00_set_field32(&reg, INT_MASK_CSR_MGMT_DMA_DONE, 0);
 449         rt2x00_set_field32(&reg, INT_MASK_CSR_MCU_COMMAND, 0);
 450         rt2x00_set_field32(&reg, INT_MASK_CSR_RXTX_COHERENT, 0);
 451         rt2x00_set_field32(&reg, INT_MASK_CSR_TBTT, mask);
 452         rt2x00_set_field32(&reg, INT_MASK_CSR_PRE_TBTT, mask);
 453         rt2x00_set_field32(&reg, INT_MASK_CSR_TX_FIFO_STATUS, mask);
 454         rt2x00_set_field32(&reg, INT_MASK_CSR_AUTO_WAKEUP, mask);
 455         rt2x00_set_field32(&reg, INT_MASK_CSR_GPTIMER, 0);
 456         rt2x00_set_field32(&reg, INT_MASK_CSR_RX_COHERENT, 0);
 457         rt2x00_set_field32(&reg, INT_MASK_CSR_TX_COHERENT, 0);
 458         rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
 459         spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
 460
 461         if (state == STATE_RADIO_IRQ_OFF) {
 462                 /*
 463                  * Wait for possibly running tasklets to finish.
 464                  */
 465                 tasklet_kill(&rt2x00dev->txstatus_tasklet);
 466                 tasklet_kill(&rt2x00dev->rxdone_tasklet);
 467                 tasklet_kill(&rt2x00dev->autowake_tasklet);
 468                 tasklet_kill(&rt2x00dev->tbtt_tasklet);
 469                 tasklet_kill(&rt2x00dev->pretbtt_tasklet);
 470         }
 471 }
 472
 473 static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
 474 {
 475         u32 reg;
 476
 477         /*
 478          * Reset DMA indexes
 479          */
 480         rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
 481         rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, 1);
 482         rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, 1);
 483         rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, 1);
 484         rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX3, 1);
 485         rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX4, 1);
 486         rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX5, 1);
 487         rt2x00_set_field32(&reg, WPDMA_RST_IDX_DRX_IDX0, 1);
 488         rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
 489
 490         rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
 491         rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
 492
 493         if (rt2x00_is_pcie(rt2x00dev) &&
 494             (rt2x00_rt(rt2x00dev, RT3572) ||
 495              rt2x00_rt(rt2x00dev, RT5390))) {
 496                 rt2x00pci_register_read(rt2x00dev, AUX_CTRL, &reg);
 497                 rt2x00_set_field32(&reg, AUX_CTRL_FORCE_PCIE_CLK, 1);
 498                 rt2x00_set_field32(&reg, AUX_CTRL_WAKE_PCIE_EN, 1);
 499                 rt2x00pci_register_write(rt2x00dev, AUX_CTRL, reg);
 500         }
 501
 502         rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
 503
 504         rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 505         rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
 506         rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
 507         rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 508
 509         rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
 510
 511         return 0;
 512 }
 513
 514 static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 515 {
 516         if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
 517                      rt2800pci_init_queues(rt2x00dev)))
 518                 return -EIO;
 519
 520         return rt2800_enable_radio(rt2x00dev);
 521 }
 522
 523 static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
 524 {
 525         if (rt2x00_is_soc(rt2x00dev)) {
 526                 rt2800_disable_radio(rt2x00dev);
 527                 rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0);
 528                 rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, 0);
 529         }
 530 }
 531
 532 static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
 533                                enum dev_state state)
 534 {
 535         if (state == STATE_AWAKE) {
 536                 rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0x02);
 537                 rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
 538         } else if (state == STATE_SLEEP) {
 539                 rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS,
 540                                          0xffffffff);
 541                 rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID,
 542                                          0xffffffff);
 543                 rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0x01, 0xff, 0x01);
 544         }
 545
 546         return 0;
 547 }
 548
 549 static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 550                                       enum dev_state state)
 551 {
 552         int retval = 0;
 553
 554         switch (state) {
 555         case STATE_RADIO_ON:
 556                 /*
 557                  * Before the radio can be enabled, the device first has
 558                  * to be woken up. After that it needs a bit of time
 559                  * to be fully awake and then the radio can be enabled.
 560                  */
 561                 rt2800pci_set_state(rt2x00dev, STATE_AWAKE);
 562                 msleep(1);
 563                 retval = rt2800pci_enable_radio(rt2x00dev);
 564                 break;
 565         case STATE_RADIO_OFF:
 566                 /*
 567                  * After the radio has been disabled, the device should
 568                  * be put to sleep for powersaving.
 569                  */
 570                 rt2800pci_disable_radio(rt2x00dev);
 571                 rt2800pci_set_state(rt2x00dev, STATE_SLEEP);
 572                 break;
 573         case STATE_RADIO_IRQ_ON:
 574         case STATE_RADIO_IRQ_OFF:
 575                 rt2800pci_toggle_irq(rt2x00dev, state);
 576                 break;
 577         case STATE_DEEP_SLEEP:
 578         case STATE_SLEEP:
 579         case STATE_STANDBY:
 580         case STATE_AWAKE:
 581                 retval = rt2800pci_set_state(rt2x00dev, state);
 582                 break;
 583         default:
 584                 retval = -ENOTSUPP;
 585                 break;
 586         }
 587
 588         if (unlikely(retval))
 589                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
 590                       state, retval);
 591
 592         return retval;
 593 }
 594
 595 /*
 596  * TX descriptor initialization
 597  */
 598 static __le32 *rt2800pci_get_txwi(struct queue_entry *entry)
 599 {
 600         return (__le32 *) entry->skb->data;
 601 }
 602
 603 static void rt2800pci_write_tx_desc(struct queue_entry *entry,
 604                                     struct txentry_desc *txdesc)
 605 {
 606         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 607         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 608         __le32 *txd = entry_priv->desc;
 609         u32 word;
 610
 611         /*
 612          * The buffers pointed by SD_PTR0/SD_LEN0 and SD_PTR1/SD_LEN1
 613          * must contains a TXWI structure + 802.11 header + padding + 802.11
 614          * data. We choose to have SD_PTR0/SD_LEN0 only contains TXWI and
 615          * SD_PTR1/SD_LEN1 contains 802.11 header + padding + 802.11
 616          * data. It means that LAST_SEC0 is always 0.
 617          */
 618
 619         /*
 620          * Initialize TX descriptor
 621          */
 622         word = 0;
 623         rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma);
 624         rt2x00_desc_write(txd, 0, word);
 625
 626         word = 0;
 627         rt2x00_set_field32(&word, TXD_W1_SD_LEN1, entry->skb->len);
 628         rt2x00_set_field32(&word, TXD_W1_LAST_SEC1,
 629                            !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
 630         rt2x00_set_field32(&word, TXD_W1_BURST,
 631                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
 632         rt2x00_set_field32(&word, TXD_W1_SD_LEN0, TXWI_DESC_SIZE);
 633         rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, 0);
 634         rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0);
 635         rt2x00_desc_write(txd, 1, word);
 636
 637         word = 0;
 638         rt2x00_set_field32(&word, TXD_W2_SD_PTR1,
 639                            skbdesc->skb_dma + TXWI_DESC_SIZE);
 640         rt2x00_desc_write(txd, 2, word);
 641
 642         word = 0;
 643         rt2x00_set_field32(&word, TXD_W3_WIV,
 644                            !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
 645         rt2x00_set_field32(&word, TXD_W3_QSEL, 2);
 646         rt2x00_desc_write(txd, 3, word);
 647
 648         /*
 649          * Register descriptor details in skb frame descriptor.
 650          */
 651         skbdesc->desc = txd;
 652         skbdesc->desc_len = TXD_DESC_SIZE;
 653 }
 654
 655 /*
 656  * RX control handlers
 657  */
 658 static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 659                                   struct rxdone_entry_desc *rxdesc)
 660 {
 661         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 662         __le32 *rxd = entry_priv->desc;
 663         u32 word;
 664
 665         rt2x00_desc_read(rxd, 3, &word);
 666
 667         if (rt2x00_get_field32(word, RXD_W3_CRC_ERROR))
 668                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 669
 670         /*
 671          * Unfortunately we don't know the cipher type used during
 672          * decryption. This prevents us from correct providing
 673          * correct statistics through debugfs.
 674          */
 675         rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W3_CIPHER_ERROR);
 676
 677         if (rt2x00_get_field32(word, RXD_W3_DECRYPTED)) {
 678                 /*
 679                  * Hardware has stripped IV/EIV data from 802.11 frame during
 680                  * decryption. Unfortunately the descriptor doesn't contain
 681                  * any fields with the EIV/IV data either, so they can't
 682                  * be restored by rt2x00lib.
 683                  */
 684                 rxdesc->flags |= RX_FLAG_IV_STRIPPED;
 685
 686                 /*
 687                  * The hardware has already checked the Michael Mic and has
 688                  * stripped it from the frame. Signal this to mac80211.
 689                  */
 690                 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
 691
 692                 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
 693                         rxdesc->flags |= RX_FLAG_DECRYPTED;
 694                 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
 695                         rxdesc->flags |= RX_FLAG_MMIC_ERROR;
 696         }
 697
 698         if (rt2x00_get_field32(word, RXD_W3_MY_BSS))
 699                 rxdesc->dev_flags |= RXDONE_MY_BSS;
 700
 701         if (rt2x00_get_field32(word, RXD_W3_L2PAD))
 702                 rxdesc->dev_flags |= RXDONE_L2PAD;
 703
 704         /*
 705          * Process the RXWI structure that is at the start of the buffer.
 706          */
 707         rt2800_process_rxwi(entry, rxdesc);
 708 }
 709
 710 /*
 711  * Interrupt functions.
 712  */
 713 static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev)
 714 {
 715         struct ieee80211_conf conf = { .flags = 0 };
 716         struct rt2x00lib_conf libconf = { .conf = &conf };
 717
 718         rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
 719 }
 720
 721 static bool rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 722 {
 723         struct data_queue *queue;
 724         struct queue_entry *entry;
 725         u32 status;
 726         u8 qid;
 727         int max_tx_done = 16;
 728
 729         while (kfifo_get(&rt2x00dev->txstatus_fifo, &status)) {
 730                 qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE);
 731                 if (unlikely(qid >= QID_RX)) {
 732                         /*
 733                          * Unknown queue, this shouldn't happen. Just drop
 734                          * this tx status.
 735                          */
 736                         WARNING(rt2x00dev, "Got TX status report with "
 737                                            "unexpected pid %u, dropping\n", qid);
 738                         break;
 739                 }
 740
 741                 queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
 742                 if (unlikely(queue == NULL)) {
 743                         /*
 744                          * The queue is NULL, this shouldn't happen. Stop
 745                          * processing here and drop the tx status
 746                          */
 747                         WARNING(rt2x00dev, "Got TX status for an unavailable "
 748                                            "queue %u, dropping\n", qid);
 749                         break;
 750                 }
 751
 752                 if (unlikely(rt2x00queue_empty(queue))) {
 753                         /*
 754                          * The queue is empty. Stop processing here
 755                          * and drop the tx status.
 756                          */
 757                         WARNING(rt2x00dev, "Got TX status for an empty "
 758                                            "queue %u, dropping\n", qid);
 759                         break;
 760                 }
 761
 762                 entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 763                 rt2800_txdone_entry(entry, status, rt2800pci_get_txwi(entry));
 764
 765                 if (--max_tx_done == 0)
 766                         break;
 767         }
 768
 769         return !max_tx_done;
 770 }
 771
 772 static inline void rt2800pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
 773                                               struct rt2x00_field32 irq_field)
 774 {
 775         u32 reg;
 776
 777         /*
 778          * Enable a single interrupt. The interrupt mask register
 779          * access needs locking.
 780          */
 781         spin_lock_irq(&rt2x00dev->irqmask_lock);
 782         rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, &reg);
 783         rt2x00_set_field32(&reg, irq_field, 1);
 784         rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
 785         spin_unlock_irq(&rt2x00dev->irqmask_lock);
 786 }
 787
 788 static void rt2800pci_txstatus_tasklet(unsigned long data)
 789 {
 790         struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
 791         if (rt2800pci_txdone(rt2x00dev))
 792                 tasklet_schedule(&rt2x00dev->txstatus_tasklet);
 793
 794         /*
 795          * No need to enable the tx status interrupt here as we always
 796          * leave it enabled to minimize the possibility of a tx status
 797          * register overflow. See comment in interrupt handler.
 798          */
 799 }
 800
 801 static void rt2800pci_pretbtt_tasklet(unsigned long data)
 802 {
 803         struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
 804         rt2x00lib_pretbtt(rt2x00dev);
 805         if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 806                 rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_PRE_TBTT);
 807 }
 808
 809 static void rt2800pci_tbtt_tasklet(unsigned long data)
 810 {
 811         struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
 812         rt2x00lib_beacondone(rt2x00dev);
 813         if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 814                 rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT);
 815 }
 816
 817 static void rt2800pci_rxdone_tasklet(unsigned long data)
 818 {
 819         struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
 820         if (rt2x00pci_rxdone(rt2x00dev))
 821                 tasklet_schedule(&rt2x00dev->rxdone_tasklet);
 822         else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 823                 rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
 824 }
 825
 826 static void rt2800pci_autowake_tasklet(unsigned long data)
 827 {
 828         struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
 829         rt2800pci_wakeup(rt2x00dev);
 830         if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 831                 rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_AUTO_WAKEUP);
 832 }
 833
 834 static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev)
 835 {
 836         u32 status;
 837         int i;
 838
 839         /*
 840          * The TX_FIFO_STATUS interrupt needs special care. We should
 841          * read TX_STA_FIFO but we should do it immediately as otherwise
 842          * the register can overflow and we would lose status reports.
 843          *
 844          * Hence, read the TX_STA_FIFO register and copy all tx status
 845          * reports into a kernel FIFO which is handled in the txstatus
 846          * tasklet. We use a tasklet to process the tx status reports
 847          * because we can schedule the tasklet multiple times (when the
 848          * interrupt fires again during tx status processing).
 849          *
 850          * Furthermore we don't disable the TX_FIFO_STATUS
 851          * interrupt here but leave it enabled so that the TX_STA_FIFO
 852          * can also be read while the tx status tasklet gets executed.
 853          *
 854          * Since we have only one producer and one consumer we don't
 855          * need to lock the kfifo.
 856          */
 857         for (i = 0; i < rt2x00dev->ops->tx->entry_num; i++) {
 858                 rt2x00pci_register_read(rt2x00dev, TX_STA_FIFO, &status);
 859
 860                 if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID))
 861                         break;
 862
 863                 if (!kfifo_put(&rt2x00dev->txstatus_fifo, &status)) {
 864                         WARNING(rt2x00dev, "TX status FIFO overrun,"
 865                                 "drop tx status report.\n");
 866                         break;
 867                 }
 868         }
 869
 870         /* Schedule the tasklet for processing the tx status. */
 871         tasklet_schedule(&rt2x00dev->txstatus_tasklet);
 872 }
 873
 874 static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
 875 {
 876         struct rt2x00_dev *rt2x00dev = dev_instance;
 877         u32 reg, mask;
 878
 879         /* Read status and ACK all interrupts */
 880         rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
 881         rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
 882
 883         /*
 884          * Some devices can generate interrupts with empty CSR register, we
 885          * "handle" such irq's to prevent interrupt controller treat them as
 886          * spurious interrupts and disable irq line.
 887          */
 888         if (!reg)
 889                 return IRQ_HANDLED;
 890
 891         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 892                 return IRQ_HANDLED;
 893
 894         /*
 895          * Since INT_MASK_CSR and INT_SOURCE_CSR use the same bits
 896          * for interrupts and interrupt masks we can just use the value of
 897          * INT_SOURCE_CSR to create the interrupt mask.
 898          */
 899         mask = ~reg;
 900
 901         if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
 902                 rt2800pci_txstatus_interrupt(rt2x00dev);
 903                 /*
 904                  * Never disable the TX_FIFO_STATUS interrupt.
 905                  */
 906                 rt2x00_set_field32(&mask, INT_MASK_CSR_TX_FIFO_STATUS, 1);
 907         }
 908
 909         if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
 910                 tasklet_hi_schedule(&rt2x00dev->pretbtt_tasklet);
 911
 912         if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT))
 913                 tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet);
 914
 915         if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
 916                 tasklet_schedule(&rt2x00dev->rxdone_tasklet);
 917
 918         if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
 919                 tasklet_schedule(&rt2x00dev->autowake_tasklet);
 920
 921         /*
 922          * Disable all interrupts for which a tasklet was scheduled right now,
 923          * the tasklet will reenable the appropriate interrupts.
 924          */
 925         spin_lock(&rt2x00dev->irqmask_lock);
 926         rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, &reg);
 927         reg &= mask;
 928         rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
 929         spin_unlock(&rt2x00dev->irqmask_lock);
 930
 931         return IRQ_HANDLED;
 932 }
 933
 934 /*
 935  * Device probe functions.
 936  */
 937 static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 938 {
 939         /*
 940          * Read EEPROM into buffer
 941          */
 942         if (rt2x00_is_soc(rt2x00dev))
 943                 rt2800pci_read_eeprom_soc(rt2x00dev);
 944         else if (rt2800pci_efuse_detect(rt2x00dev))
 945                 rt2800pci_read_eeprom_efuse(rt2x00dev);
 946         else
 947                 rt2800pci_read_eeprom_pci(rt2x00dev);
 948
 949         return rt2800_validate_eeprom(rt2x00dev);
 950 }
 951
 952 static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 953 {
 954         int retval;
 955
 956         /*
 957          * Allocate eeprom data.
 958          */
 959         retval = rt2800pci_validate_eeprom(rt2x00dev);
 960         if (retval)
 961                 return retval;
 962
 963         retval = rt2800_init_eeprom(rt2x00dev);
 964         if (retval)
 965                 return retval;
 966
 967         /*
 968          * Initialize hw specifications.
 969          */
 970         retval = rt2800_probe_hw_mode(rt2x00dev);
 971         if (retval)
 972                 return retval;
 973
 974         /*
 975          * This device has multiple filters for control frames
 976          * and has a separate filter for PS Poll frames.
 977          */
 978         __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
 979         __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
 980
 981         /*
 982          * This device has a pre tbtt interrupt and thus fetches
 983          * a new beacon directly prior to transmission.
 984          */
 985         __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
 986
 987         /*
 988          * This device requires firmware.
 989          */
 990         if (!rt2x00_is_soc(rt2x00dev))
 991                 __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
 992         __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
 993         __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
 994         __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
 995         __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
 996         if (!modparam_nohwcrypt)
 997                 __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
 998         __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
 999         __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
1000
1001         /*
1002          * Set the rssi offset.
1003          */
1004         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1005
1006         return 0;
1007 }
1008
1009 static const struct ieee80211_ops rt2800pci_mac80211_ops = {
1010         .tx                     = rt2x00mac_tx,
1011         .start                  = rt2x00mac_start,
1012         .stop                   = rt2x00mac_stop,
1013         .add_interface          = rt2x00mac_add_interface,
1014         .remove_interface       = rt2x00mac_remove_interface,
1015         .config                 = rt2x00mac_config,
1016         .configure_filter       = rt2x00mac_configure_filter,
1017         .set_key                = rt2x00mac_set_key,
1018         .sw_scan_start          = rt2x00mac_sw_scan_start,
1019         .sw_scan_complete       = rt2x00mac_sw_scan_complete,
1020         .get_stats              = rt2x00mac_get_stats,
1021         .get_tkip_seq           = rt2800_get_tkip_seq,
1022         .set_rts_threshold      = rt2800_set_rts_threshold,
1023         .sta_add                = rt2x00mac_sta_add,
1024         .sta_remove             = rt2x00mac_sta_remove,
1025         .bss_info_changed       = rt2x00mac_bss_info_changed,
1026         .conf_tx                = rt2800_conf_tx,
1027         .get_tsf                = rt2800_get_tsf,
1028         .rfkill_poll            = rt2x00mac_rfkill_poll,
1029         .ampdu_action           = rt2800_ampdu_action,
1030         .flush                  = rt2x00mac_flush,
1031         .get_survey             = rt2800_get_survey,
1032         .get_ringparam          = rt2x00mac_get_ringparam,
1033         .tx_frames_pending      = rt2x00mac_tx_frames_pending,
1034 };
1035
1036 static const struct rt2800_ops rt2800pci_rt2800_ops = {
1037         .register_read          = rt2x00pci_register_read,
1038         .register_read_lock     = rt2x00pci_register_read, /* same for PCI */
1039         .register_write         = rt2x00pci_register_write,
1040         .register_write_lock    = rt2x00pci_register_write, /* same for PCI */
1041         .register_multiread     = rt2x00pci_register_multiread,
1042         .register_multiwrite    = rt2x00pci_register_multiwrite,
1043         .regbusy_read           = rt2x00pci_regbusy_read,
1044         .drv_write_firmware     = rt2800pci_write_firmware,
1045         .drv_init_registers     = rt2800pci_init_registers,
1046         .drv_get_txwi           = rt2800pci_get_txwi,
1047 };
1048
1049 static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
1050         .irq_handler            = rt2800pci_interrupt,
1051         .txstatus_tasklet       = rt2800pci_txstatus_tasklet,
1052         .pretbtt_tasklet        = rt2800pci_pretbtt_tasklet,
1053         .tbtt_tasklet           = rt2800pci_tbtt_tasklet,
1054         .rxdone_tasklet         = rt2800pci_rxdone_tasklet,
1055         .autowake_tasklet       = rt2800pci_autowake_tasklet,
1056         .probe_hw               = rt2800pci_probe_hw,
1057         .get_firmware_name      = rt2800pci_get_firmware_name,
1058         .check_firmware         = rt2800_check_firmware,
1059         .load_firmware          = rt2800_load_firmware,
1060         .initialize             = rt2x00pci_initialize,
1061         .uninitialize           = rt2x00pci_uninitialize,
1062         .get_entry_state        = rt2800pci_get_entry_state,
1063         .clear_entry            = rt2800pci_clear_entry,
1064         .set_device_state       = rt2800pci_set_device_state,
1065         .rfkill_poll            = rt2800_rfkill_poll,
1066         .link_stats             = rt2800_link_stats,
1067         .reset_tuner            = rt2800_reset_tuner,
1068         .link_tuner             = rt2800_link_tuner,
1069         .gain_calibration       = rt2800_gain_calibration,
1070         .start_queue            = rt2800pci_start_queue,
1071         .kick_queue             = rt2800pci_kick_queue,
1072         .stop_queue             = rt2800pci_stop_queue,
1073         .flush_queue            = rt2x00pci_flush_queue,
1074         .write_tx_desc          = rt2800pci_write_tx_desc,
1075         .write_tx_data          = rt2800_write_tx_data,
1076         .write_beacon           = rt2800_write_beacon,
1077         .clear_beacon           = rt2800_clear_beacon,
1078         .fill_rxdone            = rt2800pci_fill_rxdone,
1079         .config_shared_key      = rt2800_config_shared_key,
1080         .config_pairwise_key    = rt2800_config_pairwise_key,
1081         .config_filter          = rt2800_config_filter,
1082         .config_intf            = rt2800_config_intf,
1083         .config_erp             = rt2800_config_erp,
1084         .config_ant             = rt2800_config_ant,
1085         .config                 = rt2800_config,
1086         .sta_add                = rt2800_sta_add,
1087         .sta_remove             = rt2800_sta_remove,
1088 };
1089
1090 static const struct data_queue_desc rt2800pci_queue_rx = {
1091         .entry_num              = 128,
1092         .data_size              = AGGREGATION_SIZE,
1093         .desc_size              = RXD_DESC_SIZE,
1094         .priv_size              = sizeof(struct queue_entry_priv_pci),
1095 };
1096
1097 static const struct data_queue_desc rt2800pci_queue_tx = {
1098         .entry_num              = 64,
1099         .data_size              = AGGREGATION_SIZE,
1100         .desc_size              = TXD_DESC_SIZE,
1101         .priv_size              = sizeof(struct queue_entry_priv_pci),
1102 };
1103
1104 static const struct data_queue_desc rt2800pci_queue_bcn = {
1105         .entry_num              = 8,
1106         .data_size              = 0, /* No DMA required for beacons */
1107         .desc_size              = TXWI_DESC_SIZE,
1108         .priv_size              = sizeof(struct queue_entry_priv_pci),
1109 };
1110
1111 static const struct rt2x00_ops rt2800pci_ops = {
1112         .name                   = KBUILD_MODNAME,
1113         .max_sta_intf           = 1,
1114         .max_ap_intf            = 8,
1115         .eeprom_size            = EEPROM_SIZE,
1116         .rf_size                = RF_SIZE,
1117         .tx_queues              = NUM_TX_QUEUES,
1118         .extra_tx_headroom      = TXWI_DESC_SIZE,
1119         .rx                     = &rt2800pci_queue_rx,
1120         .tx                     = &rt2800pci_queue_tx,
1121         .bcn                    = &rt2800pci_queue_bcn,
1122         .lib                    = &rt2800pci_rt2x00_ops,
1123         .drv                    = &rt2800pci_rt2800_ops,
1124         .hw                     = &rt2800pci_mac80211_ops,
1125 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1126         .debugfs                = &rt2800_rt2x00debug,
1127 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1128 };
1129
1130 /*
1131  * RT2800pci module information.
1132  */
1133 #ifdef CONFIG_PCI
1134 static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
1135         { PCI_DEVICE(0x1814, 0x0601) },
1136         { PCI_DEVICE(0x1814, 0x0681) },
1137         { PCI_DEVICE(0x1814, 0x0701) },
1138         { PCI_DEVICE(0x1814, 0x0781) },
1139         { PCI_DEVICE(0x1814, 0x3090) },
1140         { PCI_DEVICE(0x1814, 0x3091) },
1141         { PCI_DEVICE(0x1814, 0x3092) },
1142         { PCI_DEVICE(0x1432, 0x7708) },
1143         { PCI_DEVICE(0x1432, 0x7727) },
1144         { PCI_DEVICE(0x1432, 0x7728) },
1145         { PCI_DEVICE(0x1432, 0x7738) },
1146         { PCI_DEVICE(0x1432, 0x7748) },
1147         { PCI_DEVICE(0x1432, 0x7758) },
1148         { PCI_DEVICE(0x1432, 0x7768) },
1149         { PCI_DEVICE(0x1462, 0x891a) },
1150         { PCI_DEVICE(0x1a3b, 0x1059) },
1151 #ifdef CONFIG_RT2800PCI_RT33XX
1152         { PCI_DEVICE(0x1814, 0x3390) },
1153 #endif
1154 #ifdef CONFIG_RT2800PCI_RT35XX
1155         { PCI_DEVICE(0x1432, 0x7711) },
1156         { PCI_DEVICE(0x1432, 0x7722) },
1157         { PCI_DEVICE(0x1814, 0x3060) },
1158         { PCI_DEVICE(0x1814, 0x3062) },
1159         { PCI_DEVICE(0x1814, 0x3562) },
1160         { PCI_DEVICE(0x1814, 0x3592) },
1161         { PCI_DEVICE(0x1814, 0x3593) },
1162 #endif
1163 #ifdef CONFIG_RT2800PCI_RT53XX
1164         { PCI_DEVICE(0x1814, 0x5390) },
1165         { PCI_DEVICE(0x1814, 0x539a) },
1166         { PCI_DEVICE(0x1814, 0x539f) },
1167 #endif
1168         { 0, }
1169 };
1170 #endif /* CONFIG_PCI */
1171
1172 MODULE_AUTHOR(DRV_PROJECT);
1173 MODULE_VERSION(DRV_VERSION);
1174 MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
1175 MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
1176 #ifdef CONFIG_PCI
1177 MODULE_FIRMWARE(FIRMWARE_RT2860);
1178 MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
1179 #endif /* CONFIG_PCI */
1180 MODULE_LICENSE("GPL");
1181
1182 #if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
1183 static int rt2800soc_probe(struct platform_device *pdev)
1184 {
1185         return rt2x00soc_probe(pdev, &rt2800pci_ops);
1186 }
1187
1188 static struct platform_driver rt2800soc_driver = {
1189         .driver         = {
1190                 .name           = "rt2800_wmac",
1191                 .owner          = THIS_MODULE,
1192                 .mod_name       = KBUILD_MODNAME,
1193         },
1194         .probe          = rt2800soc_probe,
1195         .remove         = __devexit_p(rt2x00soc_remove),
1196         .suspend        = rt2x00soc_suspend,
1197         .resume         = rt2x00soc_resume,
1198 };
1199 #endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
1200
1201 #ifdef CONFIG_PCI
1202 static int rt2800pci_probe(struct pci_dev *pci_dev,
1203                            const struct pci_device_id *id)
1204 {
1205         return rt2x00pci_probe(pci_dev, &rt2800pci_ops);
1206 }
1207
1208 static struct pci_driver rt2800pci_driver = {
1209         .name           = KBUILD_MODNAME,
1210         .id_table       = rt2800pci_device_table,
1211         .probe          = rt2800pci_probe,
1212         .remove         = __devexit_p(rt2x00pci_remove),
1213         .suspend        = rt2x00pci_suspend,
1214         .resume         = rt2x00pci_resume,
1215 };
1216 #endif /* CONFIG_PCI */
1217
1218 static int __init rt2800pci_init(void)
1219 {
1220         int ret = 0;
1221
1222 #if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
1223         ret = platform_driver_register(&rt2800soc_driver);
1224         if (ret)
1225                 return ret;
1226 #endif
1227 #ifdef CONFIG_PCI
1228         ret = pci_register_driver(&rt2800pci_driver);
1229         if (ret) {
1230 #if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
1231                 platform_driver_unregister(&rt2800soc_driver);
1232 #endif
1233                 return ret;
1234         }
1235 #endif
1236
1237         return ret;
1238 }
1239
1240 static void __exit rt2800pci_exit(void)
1241 {
1242 #ifdef CONFIG_PCI
1243         pci_unregister_driver(&rt2800pci_driver);
1244 #endif
1245 #if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
1246         platform_driver_unregister(&rt2800soc_driver);
1247 #endif
1248 }
1249
1250 module_init(rt2800pci_init);
1251 module_exit(rt2800pci_exit);