Linux-2.6.12-rc2
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / include / asm-arm / arch-l7200 / sib.h
blobbf4364ee25351bf51c4db7824a570d4a88b0c2e8
1 /****************************************************************************/
2 /*
3 * linux/include/asm-arm/arch-l7200/sib.h
5 * Registers and helper functions for the Serial Interface Bus.
7 * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
9 * This file is subject to the terms and conditions of the GNU General Public
10 * License. See the file COPYING in the main directory of this archive for
11 * more details.
14 /****************************************************************************/
16 #define SIB_OFF 0x00040000 /* Offset from IO_START to the SIB reg's. */
18 /* IO_START and IO_BASE are defined in hardware.h */
20 #define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
21 #define SIB_BASE (IO_BASE + SIB_OFF) /* Virtual addr of the SIB reg. */
23 /* Offsets from the start of the SIB for all the registers. */
25 /* Define the SIB registers for use by device drivers and the kernel. */
27 typedef struct
29 unsigned int MCCR; /* SIB Control Register Offset: 0x00 */
30 unsigned int RES1; /* Reserved Offset: 0x04 */
31 unsigned int MCDR0; /* SIB Data Register 0 Offset: 0x08 */
32 unsigned int MCDR1; /* SIB Data Register 1 Offset: 0x0c */
33 unsigned int MCDR2; /* SIB Data Register 2 (UCB1x00) Offset: 0x10 */
34 unsigned int RES2; /* Reserved Offset: 0x14 */
35 unsigned int MCSR; /* SIB Status Register Offset: 0x18 */
36 } SIB_Interface;
38 #define SIB ((volatile SIB_Interface *) (SIB_BASE))
40 /* MCCR */
42 #define INTERNAL_FREQ 9216000 /* Hertz */
43 #define AUDIO_FREQ 5000 /* Hertz */
44 #define TELECOM_FREQ 5000 /* Hertz */
46 #define AUDIO_DIVIDE (INTERNAL_FREQ / (32 * AUDIO_FREQ))
47 #define TELECOM_DIVIDE (INTERNAL_FREQ / (32 * TELECOM_FREQ))
49 #define MCCR_ASD57 AUDIO_DIVIDE
50 #define MCCR_TSD57 (TELECOM_DIVIDE << 8)
51 #define MCCR_MCE (1 << 16) /* SIB enable */
52 #define MCCR_ECS (1 << 17) /* External Clock Select */
53 #define MCCR_ADM (1 << 18) /* A/D Data Sampling */
54 #define MCCR_PMC (1 << 26) /* PIN Multiplexer Control */
57 #define GET_ASD ((SIB->MCCR >> 0) & 0x3f) /* Audio Sample Rate Div. */
58 #define GET_TSD ((SIB->MCCR >> 8) & 0x3f) /* Telcom Sample Rate Div. */
59 #define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
60 #define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
61 #define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
62 #define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */
63 #define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
64 #define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */
65 #define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
66 #define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
67 #define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
68 #define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
69 #define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
70 #define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
72 /* MCDR0 */
74 #define AUDIO_RECV ((SIB->MCDR0 >> 4) & 0xfff)
75 #define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
77 /* MCDR1 */
79 #define TELECOM_RECV ((SIB->MCDR1 >> 2) & 032fff)
80 #define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
83 /* MCSR */
85 #define MCSR_ATU (1 << 4) /* Audio Transmit FIFO Underrun */
86 #define MCSR_ARO (1 << 5) /* Audio Receive FIFO Underrun */
87 #define MCSR_TTU (1 << 6) /* TELECOM Transmit FIFO Underrun */
88 #define MCSR_TRO (1 << 7) /* TELECOM Receive FIFO Underrun */
90 #define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
93 #define GET_ATS ((SIB->MCSR >> 0) & 0x01) /* Audio Transmit FIFO Service Req*/
94 #define GET_ARS ((SIB->MCSR >> 1) & 0x01) /* Audio Recv FIFO Service Request*/
95 #define GET_TTS ((SIB->MCSR >> 2) & 0x01) /* TELECOM Transmit FIFO Flag */
96 #define GET_TRS ((SIB->MCSR >> 3) & 0x01) /* TELECOM Recv FIFO Service Req. */
97 #define GET_ATU ((SIB->MCSR >> 4) & 0x01) /* Audio Transmit FIFO Underrun */
98 #define GET_ARO ((SIB->MCSR >> 5) & 0x01) /* Audio Receive FIFO Underrun */
99 #define GET_TTU ((SIB->MCSR >> 6) & 0x01) /* TELECOM Transmit FIFO Underrun */
100 #define GET_TRO ((SIB->MCSR >> 7) & 0x01) /* TELECOM Receive FIFO Underrun */
101 #define GET_ANF ((SIB->MCSR >> 8) & 0x01) /* Audio Transmit FIFO not full */
102 #define GET_ANE ((SIB->MCSR >> 9) & 0x01) /* Audio Receive FIFO not empty */
103 #define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
104 #define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
105 #define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
106 #define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
107 #define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
108 #define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
110 /* MCDR2 */
112 #define MCDR2_rW (1 << 16)
114 #define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
115 #define MCDR2_WRITE_COMPLETE GET_CWC
117 #define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
118 #define MCDR2_READ_COMPLETE GET_CRC
119 #define MCDR2_READ (SIB->MCDR2 & 0xffff)