include/asm-arm/arch-imx/irqs.h

   1 /*
   2  *  linux/include/asm-arm/arch-imxads/irqs.h
   3  *
   4  *  Copyright (C) 1999 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21
  22 #ifndef __ARM_IRQS_H__
  23 #define __ARM_IRQS_H__
  24
  25 /* Use the imx definitions */
  26 #include <asm/arch/hardware.h>
  27
  28 /*
  29  *  IMX Interrupt numbers
  30  *
  31  */
  32 #define INT_SOFTINT                 0
  33 #define CSI_INT                     6
  34 #define DSPA_MAC_INT                7
  35 #define DSPA_INT                    8
  36 #define COMP_INT                    9
  37 #define MSHC_XINT                   10
  38 #define GPIO_INT_PORTA              11
  39 #define GPIO_INT_PORTB              12
  40 #define GPIO_INT_PORTC              13
  41 #define LCDC_INT                    14
  42 #define SIM_INT                     15
  43 #define SIM_DATA_INT                16
  44 #define RTC_INT                     17
  45 #define RTC_SAMINT                  18
  46 #define UART2_MINT_PFERR            19
  47 #define UART2_MINT_RTS              20
  48 #define UART2_MINT_DTR              21
  49 #define UART2_MINT_UARTC            22
  50 #define UART2_MINT_TX               23
  51 #define UART2_MINT_RX               24
  52 #define UART1_MINT_PFERR            25
  53 #define UART1_MINT_RTS              26
  54 #define UART1_MINT_DTR              27
  55 #define UART1_MINT_UARTC            28
  56 #define UART1_MINT_TX               29
  57 #define UART1_MINT_RX               30
  58 #define VOICE_DAC_INT               31
  59 #define VOICE_ADC_INT               32
  60 #define PEN_DATA_INT                33
  61 #define PWM_INT                     34
  62 #define SDHC_INT                    35
  63 #define I2C_INT                     39
  64 #define CSPI_INT                    41
  65 #define SSI_TX_INT                  42
  66 #define SSI_TX_ERR_INT              43
  67 #define SSI_RX_INT                  44
  68 #define SSI_RX_ERR_INT              45
  69 #define TOUCH_INT                   46
  70 #define USBD_INT0                   47
  71 #define USBD_INT1                   48
  72 #define USBD_INT2                   49
  73 #define USBD_INT3                   50
  74 #define USBD_INT4                   51
  75 #define USBD_INT5                   52
  76 #define USBD_INT6                   53
  77 #define BTSYS_INT                   55
  78 #define BTTIM_INT                   56
  79 #define BTWUI_INT                   57
  80 #define TIM2_INT                    58
  81 #define TIM1_INT                    59
  82 #define DMA_ERR                     60
  83 #define DMA_INT                     61
  84 #define GPIO_INT_PORTD              62
  85
  86 #define IMX_IRQS                         (64)
  87
  88 /* note: the IMX has four gpio ports (A-D), but only
  89  *       the following pins are connected to the outside
  90  *       world:
  91  *
  92  * PORT A: bits 0-31
  93  * PORT B: bits 8-31
  94  * PORT C: bits 3-17
  95  * PORT D: bits 6-31
  96  *
  97  * We map these interrupts straight on. As a result we have
  98  * several holes in the interrupt mapping. We do this for two
  99  * reasons:
 100  *   - mapping the interrupts without holes would get
 101  *     far more complicated
 102  *   - Motorola could well decide to bring some processor
 103  *     with more pins connected
 104  */
 105
 106 #define IRQ_GPIOA(x)  (IMX_IRQS + x)
 107 #define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
 108 #define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
 109 #define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
 110
 111 /* decode irq number to use with IMR(x), ISR(x) and friends */
 112 #define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
 113
 114 #define NR_IRQS (IRQ_GPIOD(32) + 1)
 115 #define IRQ_GPIO(x)
 116 #endif