?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux-2.6.12-rc2
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / sun3lance.c
blob1f43bbfbc1c78af3a95902ed37d602623b1ab292
1 /* sun3lance.c: Ethernet driver for SUN3 Lance chip */
2 /*
3
4 Sun3 Lance ethernet driver, by Sam Creasey (sammy@users.qual.net).
5 This driver is a part of the linux kernel, and is thus distributed
6 under the GNU General Public License.
7
8 The values used in LANCE_OBIO and LANCE_IRQ seem to be empirically
9 true for the correct IRQ and address of the lance registers. They
10 have not been widely tested, however. What we probably need is a
11 "proper" way to search for a device in the sun3's prom, but, alas,
12 linux has no such thing.
13
14 This driver is largely based on atarilance.c, by Roman Hodek. Other
15 sources of inspiration were the NetBSD sun3 am7990 driver, and the
16 linux sparc lance driver (sunlance.c).
17
18 There are more assumptions made throughout this driver, it almost
19 certainly still needs work, but it does work at least for RARP/BOOTP and
20 mounting the root NFS filesystem.
21
22 */
23
24 static char *version = "sun3lance.c: v1.2 1/12/2001 Sam Creasey (sammy@sammy.net)\n";
25
26 #include <linux/module.h>
27 #include <linux/stddef.h>
28 #include <linux/kernel.h>
29 #include <linux/string.h>
30 #include <linux/errno.h>
31 #include <linux/slab.h>
32 #include <linux/interrupt.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
35 #include <linux/delay.h>
36 #include <linux/netdevice.h>
37 #include <linux/etherdevice.h>
38 #include <linux/skbuff.h>
39 #include <linux/bitops.h>
40
41 #include <asm/setup.h>
42 #include <asm/irq.h>
43 #include <asm/io.h>
44 #include <asm/pgtable.h>
45 #include <asm/dvma.h>
46 #include <asm/idprom.h>
47 #include <asm/machines.h>
48
49 #ifdef CONFIG_SUN3
50 #include <asm/sun3mmu.h>
51 #else
52 #include <asm/sun3xprom.h>
53 #endif
54
55 /* sun3/60 addr/irq for the lance chip. If your sun is different,
56 change this. */
57 #define LANCE_OBIO 0x120000
58 #define LANCE_IRQ IRQ3
59
60 /* Debug level:
61 * 0 = silent, print only serious errors
62 * 1 = normal, print error messages
63 * 2 = debug, print debug infos
64 * 3 = debug, print even more debug infos (packet data)
65 */
66
67 #define LANCE_DEBUG 0
68
69 #ifdef LANCE_DEBUG
70 static int lance_debug = LANCE_DEBUG;
71 #else
72 static int lance_debug = 1;
73 #endif
74 MODULE_PARM(lance_debug, "i");
75 MODULE_PARM_DESC(lance_debug, "SUN3 Lance debug level (0-3)");
76 MODULE_LICENSE("GPL");
77
78 #define DPRINTK(n,a) \
79 do { \
80 if (lance_debug >= n) \
81 printk a; \
82 } while( 0 )
83
84
85 /* we're only using 32k of memory, so we use 4 TX
86 buffers and 16 RX buffers. These values are expressed as log2. */
87
88 #define TX_LOG_RING_SIZE 3
89 #define RX_LOG_RING_SIZE 5
90
91 /* These are the derived values */
92
93 #define TX_RING_SIZE (1 << TX_LOG_RING_SIZE)
94 #define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5)
95 #define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
96
97 #define RX_RING_SIZE (1 << RX_LOG_RING_SIZE)
98 #define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5)
99 #define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
100
101 /* Definitions for packet buffer access: */
102 #define PKT_BUF_SZ 1544
103
104 /* Get the address of a packet buffer corresponding to a given buffer head */
105 #define PKTBUF_ADDR(head) (void *)((unsigned long)(MEM) | (head)->base)
106
107
108 /* The LANCE Rx and Tx ring descriptors. */
109 struct lance_rx_head {
110 unsigned short base; /* Low word of base addr */
111 volatile unsigned char flag;
112 unsigned char base_hi; /* High word of base addr (unused) */
113 short buf_length; /* This length is 2s complement! */
114 volatile short msg_length; /* This length is "normal". */
115 };
116
117 struct lance_tx_head {
118 unsigned short base; /* Low word of base addr */
119 volatile unsigned char flag;
120 unsigned char base_hi; /* High word of base addr (unused) */
121 short length; /* Length is 2s complement! */
122 volatile short misc;
123 };
124
125 /* The LANCE initialization block, described in databook. */
126 struct lance_init_block {
127 unsigned short mode; /* Pre-set mode */
128 unsigned char hwaddr[6]; /* Physical ethernet address */
129 unsigned int filter[2]; /* Multicast filter (unused). */
130 /* Receive and transmit ring base, along with length bits. */
131 unsigned short rdra;
132 unsigned short rlen;
133 unsigned short tdra;
134 unsigned short tlen;
135 unsigned short pad[4]; /* is thie needed? */
136 };
137
138 /* The whole layout of the Lance shared memory */
139 struct lance_memory {
140 struct lance_init_block init;
141 struct lance_tx_head tx_head[TX_RING_SIZE];
142 struct lance_rx_head rx_head[RX_RING_SIZE];
143 char rx_data[RX_RING_SIZE][PKT_BUF_SZ];
144 char tx_data[TX_RING_SIZE][PKT_BUF_SZ];
145 };
146
147 /* The driver's private device structure */
148
149 struct lance_private {
150 volatile unsigned short *iobase;
151 struct lance_memory *mem;
152 int new_rx, new_tx; /* The next free ring entry */
153 int old_tx, old_rx; /* ring entry to be processed */
154 struct net_device_stats stats;
155 /* These two must be longs for set_bit() */
156 long tx_full;
157 long lock;
158 };
159
160 /* I/O register access macros */
161
162 #define MEM lp->mem
163 #define DREG lp->iobase[0]
164 #define AREG lp->iobase[1]
165 #define REGA(a) ( AREG = (a), DREG )
166
167 /* Definitions for the Lance */
168
169 /* tx_head flags */
170 #define TMD1_ENP 0x01 /* end of packet */
171 #define TMD1_STP 0x02 /* start of packet */
172 #define TMD1_DEF 0x04 /* deferred */
173 #define TMD1_ONE 0x08 /* one retry needed */
174 #define TMD1_MORE 0x10 /* more than one retry needed */
175 #define TMD1_ERR 0x40 /* error summary */
176 #define TMD1_OWN 0x80 /* ownership (set: chip owns) */
177
178 #define TMD1_OWN_CHIP TMD1_OWN
179 #define TMD1_OWN_HOST 0
180
181 /* tx_head misc field */
182 #define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */
183 #define TMD3_RTRY 0x0400 /* failed after 16 retries */
184 #define TMD3_LCAR 0x0800 /* carrier lost */
185 #define TMD3_LCOL 0x1000 /* late collision */
186 #define TMD3_UFLO 0x4000 /* underflow (late memory) */
187 #define TMD3_BUFF 0x8000 /* buffering error (no ENP) */
188
189 /* rx_head flags */
190 #define RMD1_ENP 0x01 /* end of packet */
191 #define RMD1_STP 0x02 /* start of packet */
192 #define RMD1_BUFF 0x04 /* buffer error */
193 #define RMD1_CRC 0x08 /* CRC error */
194 #define RMD1_OFLO 0x10 /* overflow */
195 #define RMD1_FRAM 0x20 /* framing error */
196 #define RMD1_ERR 0x40 /* error summary */
197 #define RMD1_OWN 0x80 /* ownership (set: ship owns) */
198
199 #define RMD1_OWN_CHIP RMD1_OWN
200 #define RMD1_OWN_HOST 0
201
202 /* register names */
203 #define CSR0 0 /* mode/status */
204 #define CSR1 1 /* init block addr (low) */
205 #define CSR2 2 /* init block addr (high) */
206 #define CSR3 3 /* misc */
207 #define CSR8 8 /* address filter */
208 #define CSR15 15 /* promiscuous mode */
209
210 /* CSR0 */
211 /* (R=readable, W=writeable, S=set on write, C=clear on write) */
212 #define CSR0_INIT 0x0001 /* initialize (RS) */
213 #define CSR0_STRT 0x0002 /* start (RS) */
214 #define CSR0_STOP 0x0004 /* stop (RS) */
215 #define CSR0_TDMD 0x0008 /* transmit demand (RS) */
216 #define CSR0_TXON 0x0010 /* transmitter on (R) */
217 #define CSR0_RXON 0x0020 /* receiver on (R) */
218 #define CSR0_INEA 0x0040 /* interrupt enable (RW) */
219 #define CSR0_INTR 0x0080 /* interrupt active (R) */
220 #define CSR0_IDON 0x0100 /* initialization done (RC) */
221 #define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */
222 #define CSR0_RINT 0x0400 /* receiver interrupt (RC) */
223 #define CSR0_MERR 0x0800 /* memory error (RC) */
224 #define CSR0_MISS 0x1000 /* missed frame (RC) */
225 #define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */
226 #define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */
227 #define CSR0_ERR 0x8000 /* error (RC) */
228
229 /* CSR3 */
230 #define CSR3_BCON 0x0001 /* byte control */
231 #define CSR3_ACON 0x0002 /* ALE control */
232 #define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */
233
234 /***************************** Prototypes *****************************/
235
236 static int lance_probe( struct net_device *dev);
237 static int lance_open( struct net_device *dev );
238 static void lance_init_ring( struct net_device *dev );
239 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
240 static irqreturn_t lance_interrupt( int irq, void *dev_id, struct pt_regs *fp );
241 static int lance_rx( struct net_device *dev );
242 static int lance_close( struct net_device *dev );
243 static struct net_device_stats *lance_get_stats( struct net_device *dev );
244 static void set_multicast_list( struct net_device *dev );
245
246 /************************* End of Prototypes **************************/
247
248 struct net_device * __init sun3lance_probe(int unit)
249 {
250 struct net_device *dev;
251 static int found;
252 int err = -ENODEV;
253
254 /* check that this machine has an onboard lance */
255 switch(idprom->id_machtype) {
256 case SM_SUN3|SM_3_50:
257 case SM_SUN3|SM_3_60:
258 case SM_SUN3X|SM_3_80:
259 /* these machines have lance */
260 break;
261
262 default:
263 return ERR_PTR(-ENODEV);
264 }
265
266 if (found)
267 return ERR_PTR(-ENODEV);
268
269 dev = alloc_etherdev(sizeof(struct lance_private));
270 if (!dev)
271 return ERR_PTR(-ENOMEM);
272 if (unit >= 0) {
273 sprintf(dev->name, "eth%d", unit);
274 netdev_boot_setup_check(dev);
275 }
276 SET_MODULE_OWNER(dev);
277
278 if (!lance_probe(dev))
279 goto out;
280
281 err = register_netdev(dev);
282 if (err)
283 goto out1;
284 found = 1;
285 return dev;
286
287 out1:
288 #ifdef CONFIG_SUN3
289 iounmap((void *)dev->base_addr);
290 #endif
291 out:
292 free_netdev(dev);
293 return ERR_PTR(err);
294 }
295
296 static int __init lance_probe( struct net_device *dev)
297 {
298 unsigned long ioaddr;
299
300 struct lance_private *lp;
301 int i;
302 static int did_version;
303 volatile unsigned short *ioaddr_probe;
304 unsigned short tmp1, tmp2;
305
306 #ifdef CONFIG_SUN3
307 ioaddr = (unsigned long)ioremap(LANCE_OBIO, PAGE_SIZE);
308 if (!ioaddr)
309 return 0;
310 #else
311 ioaddr = SUN3X_LANCE;
312 #endif
313
314 /* test to see if there's really a lance here */
315 /* (CSRO_INIT shouldn't be readable) */
316
317 ioaddr_probe = (volatile unsigned short *)ioaddr;
318 tmp1 = ioaddr_probe[0];
319 tmp2 = ioaddr_probe[1];
320
321 ioaddr_probe[1] = CSR0;
322 ioaddr_probe[0] = CSR0_INIT | CSR0_STOP;
323
324 if(ioaddr_probe[0] != CSR0_STOP) {
325 ioaddr_probe[0] = tmp1;
326 ioaddr_probe[1] = tmp2;
327
328 #ifdef CONFIG_SUN3
329 iounmap((void *)ioaddr);
330 #endif
331 return 0;
332 }
333
334 lp = netdev_priv(dev);
335
336 /* XXX - leak? */
337 MEM = dvma_malloc_align(sizeof(struct lance_memory), 0x10000);
338
339 lp->iobase = (volatile unsigned short *)ioaddr;
340 dev->base_addr = (unsigned long)ioaddr; /* informational only */
341
342 REGA(CSR0) = CSR0_STOP;
343
344 request_irq(LANCE_IRQ, lance_interrupt, SA_INTERRUPT, "SUN3 Lance", dev);
345 dev->irq = (unsigned short)LANCE_IRQ;
346
347
348 printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ",
349 dev->name,
350 (unsigned long)ioaddr,
351 (unsigned long)MEM,
352 dev->irq);
353
354 /* copy in the ethernet address from the prom */
355 for(i = 0; i < 6 ; i++)
356 dev->dev_addr[i] = idprom->id_ethaddr[i];
357
358 /* tell the card it's ether address, bytes swapped */
359 MEM->init.hwaddr[0] = dev->dev_addr[1];
360 MEM->init.hwaddr[1] = dev->dev_addr[0];
361 MEM->init.hwaddr[2] = dev->dev_addr[3];
362 MEM->init.hwaddr[3] = dev->dev_addr[2];
363 MEM->init.hwaddr[4] = dev->dev_addr[5];
364 MEM->init.hwaddr[5] = dev->dev_addr[4];
365
366 for( i = 0; i < 6; ++i )
367 printk( "%02x%s", dev->dev_addr[i], (i < 5) ? ":" : "\n" );
368
369 MEM->init.mode = 0x0000;
370 MEM->init.filter[0] = 0x00000000;
371 MEM->init.filter[1] = 0x00000000;
372 MEM->init.rdra = dvma_vtob(MEM->rx_head);
373 MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
374 (dvma_vtob(MEM->rx_head) >> 16);
375 MEM->init.tdra = dvma_vtob(MEM->tx_head);
376 MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
377 (dvma_vtob(MEM->tx_head) >> 16);
378
379 DPRINTK(2, ("initaddr: %08lx rx_ring: %08lx tx_ring: %08lx\n",
380 dvma_vtob(&(MEM->init)), dvma_vtob(MEM->rx_head),
381 (dvma_vtob(MEM->tx_head))));
382
383 if (did_version++ == 0)
384 printk( version );
385
386 /* The LANCE-specific entries in the device structure. */
387 dev->open = &lance_open;
388 dev->hard_start_xmit = &lance_start_xmit;
389 dev->stop = &lance_close;
390 dev->get_stats = &lance_get_stats;
391 dev->set_multicast_list = &set_multicast_list;
392 dev->set_mac_address = 0;
393 // KLUDGE -- REMOVE ME
394 set_bit(__LINK_STATE_PRESENT, &dev->state);
395
396
397 memset( &lp->stats, 0, sizeof(lp->stats) );
398
399 return 1;
400 }
401
402 static int lance_open( struct net_device *dev )
403 {
404 struct lance_private *lp = netdev_priv(dev);
405 int i;
406
407 DPRINTK( 2, ( "%s: lance_open()\n", dev->name ));
408
409 REGA(CSR0) = CSR0_STOP;
410
411 lance_init_ring(dev);
412
413 /* From now on, AREG is kept to point to CSR0 */
414 REGA(CSR0) = CSR0_INIT;
415
416 i = 1000000;
417 while (--i > 0)
418 if (DREG & CSR0_IDON)
419 break;
420 if (i < 0 || (DREG & CSR0_ERR)) {
421 DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
422 dev->name, i, DREG ));
423 DREG = CSR0_STOP;
424 return( -EIO );
425 }
426
427 DREG = CSR0_IDON | CSR0_STRT | CSR0_INEA;
428
429 netif_start_queue(dev);
430
431 DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG ));
432
433 return( 0 );
434 }
435
436
437 /* Initialize the LANCE Rx and Tx rings. */
438
439 static void lance_init_ring( struct net_device *dev )
440 {
441 struct lance_private *lp = netdev_priv(dev);
442 int i;
443
444 lp->lock = 0;
445 lp->tx_full = 0;
446 lp->new_rx = lp->new_tx = 0;
447 lp->old_rx = lp->old_tx = 0;
448
449 for( i = 0; i < TX_RING_SIZE; i++ ) {
450 MEM->tx_head[i].base = dvma_vtob(MEM->tx_data[i]);
451 MEM->tx_head[i].flag = 0;
452 MEM->tx_head[i].base_hi =
453 (dvma_vtob(MEM->tx_data[i])) >>16;
454 MEM->tx_head[i].length = 0;
455 MEM->tx_head[i].misc = 0;
456 }
457
458 for( i = 0; i < RX_RING_SIZE; i++ ) {
459 MEM->rx_head[i].base = dvma_vtob(MEM->rx_data[i]);
460 MEM->rx_head[i].flag = RMD1_OWN_CHIP;
461 MEM->rx_head[i].base_hi =
462 (dvma_vtob(MEM->rx_data[i])) >> 16;
463 MEM->rx_head[i].buf_length = -PKT_BUF_SZ | 0xf000;
464 MEM->rx_head[i].msg_length = 0;
465 }
466
467 /* tell the card it's ether address, bytes swapped */
468 MEM->init.hwaddr[0] = dev->dev_addr[1];
469 MEM->init.hwaddr[1] = dev->dev_addr[0];
470 MEM->init.hwaddr[2] = dev->dev_addr[3];
471 MEM->init.hwaddr[3] = dev->dev_addr[2];
472 MEM->init.hwaddr[4] = dev->dev_addr[5];
473 MEM->init.hwaddr[5] = dev->dev_addr[4];
474
475 MEM->init.mode = 0x0000;
476 MEM->init.filter[0] = 0x00000000;
477 MEM->init.filter[1] = 0x00000000;
478 MEM->init.rdra = dvma_vtob(MEM->rx_head);
479 MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
480 (dvma_vtob(MEM->rx_head) >> 16);
481 MEM->init.tdra = dvma_vtob(MEM->tx_head);
482 MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
483 (dvma_vtob(MEM->tx_head) >> 16);
484
485
486 /* tell the lance the address of its init block */
487 REGA(CSR1) = dvma_vtob(&(MEM->init));
488 REGA(CSR2) = dvma_vtob(&(MEM->init)) >> 16;
489
490 #ifdef CONFIG_SUN3X
491 REGA(CSR3) = CSR3_BSWP | CSR3_ACON | CSR3_BCON;
492 #else
493 REGA(CSR3) = CSR3_BSWP;
494 #endif
495
496 }
497
498
499 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
500 {
501 struct lance_private *lp = netdev_priv(dev);
502 int entry, len;
503 struct lance_tx_head *head;
504 unsigned long flags;
505
506 DPRINTK( 1, ( "%s: transmit start.\n",
507 dev->name));
508
509 /* Transmitter timeout, serious problems. */
510 if (netif_queue_stopped(dev)) {
511 int tickssofar = jiffies - dev->trans_start;
512 if (tickssofar < 20)
513 return( 1 );
514
515 DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
516 dev->name, DREG ));
517 DREG = CSR0_STOP;
518 /*
519 * Always set BSWP after a STOP as STOP puts it back into
520 * little endian mode.
521 */
522 REGA(CSR3) = CSR3_BSWP;
523 lp->stats.tx_errors++;
524
525 if(lance_debug >= 2) {
526 int i;
527 printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n",
528 lp->old_tx, lp->new_tx,
529 lp->tx_full ? " (full)" : "",
530 lp->new_rx );
531 for( i = 0 ; i < RX_RING_SIZE; i++ )
532 printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
533 i, MEM->rx_head[i].base,
534 -MEM->rx_head[i].buf_length,
535 MEM->rx_head[i].msg_length);
536 for( i = 0 ; i < TX_RING_SIZE; i++ )
537 printk("tx #%d: base=%04x len=%04x misc=%04x\n",
538 i, MEM->tx_head[i].base,
539 -MEM->tx_head[i].length,
540 MEM->tx_head[i].misc );
541 }
542
543 lance_init_ring(dev);
544 REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT;
545
546 netif_start_queue(dev);
547 dev->trans_start = jiffies;
548
549 return 0;
550 }
551
552
553 /* Block a timer-based transmit from overlapping. This could better be
554 done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
555
556 /* Block a timer-based transmit from overlapping with us by
557 stopping the queue for a bit... */
558
559 netif_stop_queue(dev);
560
561 if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) {
562 printk( "%s: tx queue lock!.\n", dev->name);
563 /* don't clear dev->tbusy flag. */
564 return 1;
565 }
566
567 AREG = CSR0;
568 DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
569 dev->name, DREG ));
570
571 #ifdef CONFIG_SUN3X
572 /* this weirdness doesn't appear on sun3... */
573 if(!(DREG & CSR0_INIT)) {
574 DPRINTK( 1, ("INIT not set, reinitializing...\n"));
575 REGA( CSR0 ) = CSR0_STOP;
576 lance_init_ring(dev);
577 REGA( CSR0 ) = CSR0_INIT | CSR0_STRT;
578 }
579 #endif
580
581 /* Fill in a Tx ring entry */
582 #if 0
583 if (lance_debug >= 2) {
584 u_char *p;
585 int i;
586 printk( "%s: TX pkt %d type 0x%04x from ", dev->name,
587 lp->new_tx, ((u_short *)skb->data)[6]);
588 for( p = &((u_char *)skb->data)[6], i = 0; i < 6; i++ )
589 printk("%02x%s", *p++, i != 5 ? ":" : "" );
590 printk(" to ");
591 for( p = (u_char *)skb->data, i = 0; i < 6; i++ )
592 printk("%02x%s", *p++, i != 5 ? ":" : "" );
593 printk(" data at 0x%08x len %d\n", (int)skb->data,
594 (int)skb->len );
595 }
596 #endif
597 /* We're not prepared for the int until the last flags are set/reset.
598 * And the int may happen already after setting the OWN_CHIP... */
599 local_irq_save(flags);
600
601 /* Mask to ring buffer boundary. */
602 entry = lp->new_tx;
603 head = &(MEM->tx_head[entry]);
604
605 /* Caution: the write order is important here, set the "ownership" bits
606 * last.
607 */
608
609 /* the sun3's lance needs it's buffer padded to the minimum
610 size */
611 len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
612
613 // head->length = -len;
614 head->length = (-len) | 0xf000;
615 head->misc = 0;
616
617 memcpy( PKTBUF_ADDR(head), (void *)skb->data, skb->len );
618 if (len != skb->len)
619 memset(PKTBUF_ADDR(head) + skb->len, 0, len-skb->len);
620
621 head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
622 lp->new_tx = (lp->new_tx + 1) & TX_RING_MOD_MASK;
623 lp->stats.tx_bytes += skb->len;
624
625 /* Trigger an immediate send poll. */
626 REGA(CSR0) = CSR0_INEA | CSR0_TDMD | CSR0_STRT;
627 AREG = CSR0;
628 DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n",
629 dev->name, DREG ));
630 dev->trans_start = jiffies;
631 dev_kfree_skb( skb );
632
633 lp->lock = 0;
634 if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) ==
635 TMD1_OWN_HOST)
636 netif_start_queue(dev);
637
638 local_irq_restore(flags);
639
640 return 0;
641 }
642
643 /* The LANCE interrupt handler. */
644
645 static irqreturn_t lance_interrupt( int irq, void *dev_id, struct pt_regs *fp)
646 {
647 struct net_device *dev = dev_id;
648 struct lance_private *lp = netdev_priv(dev);
649 int csr0;
650 static int in_interrupt;
651
652 if (dev == NULL) {
653 DPRINTK( 1, ( "lance_interrupt(): invalid dev_id\n" ));
654 return IRQ_NONE;
655 }
656
657 if (in_interrupt)
658 DPRINTK( 2, ( "%s: Re-entering the interrupt handler.\n", dev->name ));
659 in_interrupt = 1;
660
661 still_more:
662 flush_cache_all();
663
664 AREG = CSR0;
665 csr0 = DREG;
666
667 /* ack interrupts */
668 DREG = csr0 & (CSR0_TINT | CSR0_RINT | CSR0_IDON);
669
670 /* clear errors */
671 if(csr0 & CSR0_ERR)
672 DREG = CSR0_BABL | CSR0_MERR | CSR0_CERR | CSR0_MISS;
673
674
675 DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n",
676 dev->name, csr0, DREG ));
677
678 if (csr0 & CSR0_TINT) { /* Tx-done interrupt */
679 int old_tx = lp->old_tx;
680
681 // if(lance_debug >= 3) {
682 // int i;
683 //
684 // printk("%s: tx int\n", dev->name);
685 //
686 // for(i = 0; i < TX_RING_SIZE; i++)
687 // printk("ring %d flag=%04x\n", i,
688 // MEM->tx_head[i].flag);
689 // }
690
691 while( old_tx != lp->new_tx) {
692 struct lance_tx_head *head = &(MEM->tx_head[old_tx]);
693
694 DPRINTK(3, ("on tx_ring %d\n", old_tx));
695
696 if (head->flag & TMD1_OWN_CHIP)
697 break; /* It still hasn't been Txed */
698
699 if (head->flag & TMD1_ERR) {
700 int status = head->misc;
701 lp->stats.tx_errors++;
702 if (status & TMD3_RTRY) lp->stats.tx_aborted_errors++;
703 if (status & TMD3_LCAR) lp->stats.tx_carrier_errors++;
704 if (status & TMD3_LCOL) lp->stats.tx_window_errors++;
705 if (status & (TMD3_UFLO | TMD3_BUFF)) {
706 lp->stats.tx_fifo_errors++;
707 printk("%s: Tx FIFO error\n",
708 dev->name);
709 REGA(CSR0) = CSR0_STOP;
710 REGA(CSR3) = CSR3_BSWP;
711 lance_init_ring(dev);
712 REGA(CSR0) = CSR0_STRT | CSR0_INEA;
713 return IRQ_HANDLED;
714 }
715 } else if(head->flag & (TMD1_ENP | TMD1_STP)) {
716
717 head->flag &= ~(TMD1_ENP | TMD1_STP);
718 if(head->flag & (TMD1_ONE | TMD1_MORE))
719 lp->stats.collisions++;
720
721 lp->stats.tx_packets++;
722 DPRINTK(3, ("cleared tx ring %d\n", old_tx));
723 }
724 old_tx = (old_tx +1) & TX_RING_MOD_MASK;
725 }
726
727 lp->old_tx = old_tx;
728 }
729
730
731 if (netif_queue_stopped(dev)) {
732 /* The ring is no longer full, clear tbusy. */
733 netif_start_queue(dev);
734 netif_wake_queue(dev);
735 }
736
737 if (csr0 & CSR0_RINT) /* Rx interrupt */
738 lance_rx( dev );
739
740 /* Log misc errors. */
741 if (csr0 & CSR0_BABL) lp->stats.tx_errors++; /* Tx babble. */
742 if (csr0 & CSR0_MISS) lp->stats.rx_errors++; /* Missed a Rx frame. */
743 if (csr0 & CSR0_MERR) {
744 DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), "
745 "status %04x.\n", dev->name, csr0 ));
746 /* Restart the chip. */
747 REGA(CSR0) = CSR0_STOP;
748 REGA(CSR3) = CSR3_BSWP;
749 lance_init_ring(dev);
750 REGA(CSR0) = CSR0_STRT | CSR0_INEA;
751 }
752
753
754 /* Clear any other interrupt, and set interrupt enable. */
755 // DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR |
756 // CSR0_IDON | CSR0_INEA;
757
758 REGA(CSR0) = CSR0_INEA;
759
760 if(DREG & (CSR0_RINT | CSR0_TINT)) {
761 DPRINTK(2, ("restarting interrupt, csr0=%#04x\n", DREG));
762 goto still_more;
763 }
764
765 DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n",
766 dev->name, DREG ));
767 in_interrupt = 0;
768 return IRQ_HANDLED;
769 }
770
771 /* get packet, toss into skbuff */
772 static int lance_rx( struct net_device *dev )
773 {
774 struct lance_private *lp = netdev_priv(dev);
775 int entry = lp->new_rx;
776
777 /* If we own the next entry, it's a new packet. Send it up. */
778 while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) {
779 struct lance_rx_head *head = &(MEM->rx_head[entry]);
780 int status = head->flag;
781
782 if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */
783 /* There is a tricky error noted by John Murphy,
784 <murf@perftech.com> to Russ Nelson: Even with
785 full-sized buffers it's possible for a jabber packet to use two
786 buffers, with only the last correctly noting the error. */
787 if (status & RMD1_ENP) /* Only count a general error at the */
788 lp->stats.rx_errors++; /* end of a packet.*/
789 if (status & RMD1_FRAM) lp->stats.rx_frame_errors++;
790 if (status & RMD1_OFLO) lp->stats.rx_over_errors++;
791 if (status & RMD1_CRC) lp->stats.rx_crc_errors++;
792 if (status & RMD1_BUFF) lp->stats.rx_fifo_errors++;
793 head->flag &= (RMD1_ENP|RMD1_STP);
794 } else {
795 /* Malloc up new buffer, compatible with net-3. */
796 // short pkt_len = head->msg_length;// & 0xfff;
797 short pkt_len = (head->msg_length & 0xfff) - 4;
798 struct sk_buff *skb;
799
800 if (pkt_len < 60) {
801 printk( "%s: Runt packet!\n", dev->name );
802 lp->stats.rx_errors++;
803 }
804 else {
805 skb = dev_alloc_skb( pkt_len+2 );
806 if (skb == NULL) {
807 DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n",
808 dev->name ));
809
810 lp->stats.rx_dropped++;
811 head->msg_length = 0;
812 head->flag |= RMD1_OWN_CHIP;
813 lp->new_rx = (lp->new_rx+1) &
814 RX_RING_MOD_MASK;
815 }
816
817 #if 0
818 if (lance_debug >= 3) {
819 u_char *data = PKTBUF_ADDR(head), *p;
820 printk( "%s: RX pkt %d type 0x%04x from ", dev->name, entry, ((u_short *)data)[6]);
821 for( p = &data[6], i = 0; i < 6; i++ )
822 printk("%02x%s", *p++, i != 5 ? ":" : "" );
823 printk(" to ");
824 for( p = data, i = 0; i < 6; i++ )
825 printk("%02x%s", *p++, i != 5 ? ":" : "" );
826 printk(" data %02x %02x %02x %02x %02x %02x %02x %02x "
827 "len %d at %08x\n",
828 data[15], data[16], data[17], data[18],
829 data[19], data[20], data[21], data[22],
830 pkt_len, data);
831 }
832 #endif
833 if (lance_debug >= 3) {
834 u_char *data = PKTBUF_ADDR(head);
835 printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len);
836 }
837
838
839 skb->dev = dev;
840 skb_reserve( skb, 2 ); /* 16 byte align */
841 skb_put( skb, pkt_len ); /* Make room */
842 // memcpy( skb->data, PKTBUF_ADDR(head), pkt_len );
843 eth_copy_and_sum(skb,
844 PKTBUF_ADDR(head),
845 pkt_len, 0);
846
847 skb->protocol = eth_type_trans( skb, dev );
848 netif_rx( skb );
849 dev->last_rx = jiffies;
850 lp->stats.rx_packets++;
851 lp->stats.rx_bytes += pkt_len;
852 }
853 }
854
855 // head->buf_length = -PKT_BUF_SZ | 0xf000;
856 head->msg_length = 0;
857 head->flag = RMD1_OWN_CHIP;
858
859 entry = lp->new_rx = (lp->new_rx +1) & RX_RING_MOD_MASK;
860 }
861
862 /* From lance.c (Donald Becker): */
863 /* We should check that at least two ring entries are free.
864 If not, we should free one and mark stats->rx_dropped++. */
865
866 return 0;
867 }
868
869
870 static int lance_close( struct net_device *dev )
871 {
872 struct lance_private *lp = netdev_priv(dev);
873
874 netif_stop_queue(dev);
875
876 AREG = CSR0;
877
878 DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n",
879 dev->name, DREG ));
880
881 /* We stop the LANCE here -- it occasionally polls
882 memory if we don't. */
883 DREG = CSR0_STOP;
884 return 0;
885 }
886
887
888 static struct net_device_stats *lance_get_stats( struct net_device *dev )
889 {
890 struct lance_private *lp = netdev_priv(dev);
891
892 return &lp->stats;
893 }
894
895
896 /* Set or clear the multicast filter for this adaptor.
897 num_addrs == -1 Promiscuous mode, receive all packets
898 num_addrs == 0 Normal mode, clear multicast list
899 num_addrs > 0 Multicast mode, receive normal and MC packets, and do
900 best-effort filtering.
901 */
902
903 /* completely untested on a sun3 */
904 static void set_multicast_list( struct net_device *dev )
905 {
906 struct lance_private *lp = netdev_priv(dev);
907
908 if(netif_queue_stopped(dev))
909 /* Only possible if board is already started */
910 return;
911
912 /* We take the simple way out and always enable promiscuous mode. */
913 DREG = CSR0_STOP; /* Temporarily stop the lance. */
914
915 if (dev->flags & IFF_PROMISC) {
916 /* Log any net taps. */
917 DPRINTK( 1, ( "%s: Promiscuous mode enabled.\n", dev->name ));
918 REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
919 } else {
920 short multicast_table[4];
921 int num_addrs = dev->mc_count;
922 int i;
923 /* We don't use the multicast table, but rely on upper-layer
924 * filtering. */
925 memset( multicast_table, (num_addrs == 0) ? 0 : -1,
926 sizeof(multicast_table) );
927 for( i = 0; i < 4; i++ )
928 REGA( CSR8+i ) = multicast_table[i];
929 REGA( CSR15 ) = 0; /* Unset promiscuous mode */
930 }
931
932 /*
933 * Always set BSWP after a STOP as STOP puts it back into
934 * little endian mode.
935 */
936 REGA( CSR3 ) = CSR3_BSWP;
937
938 /* Resume normal operation and reset AREG to CSR0 */
939 REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT;
940 }
941
942
943 #ifdef MODULE
944
945 static struct net_device *sun3lance_dev;
946
947 int init_module(void)
948 {
949 sun3lance_dev = sun3lance_probe(-1);
950 if (IS_ERR(sun3lance_dev))
951 return PTR_ERR(sun3lance_dev);
952 return 0;
953 }
954
955 void cleanup_module(void)
956 {
957 unregister_netdev(sun3lance_dev);
958 #ifdef CONFIG_SUN3
959 iounmap((void *)sun3lance_dev->base_addr);
960 #endif
961 free_netdev(sun3lance_dev);
962 }
963
964 #endif /* MODULE */
965
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree