drivers/net/sk_mca.h

   1 #include <linux/version.h>
   2
   3 #ifndef _SK_MCA_INCLUDE_
   4 #define _SK_MCA_INCLUDE_
   5
   6 #ifdef _SK_MCA_DRIVER_
   7
   8 /* Adapter ID's */
   9 #define SKNET_MCA_ID 0x6afd
  10 #define SKNET_JUNIOR_MCA_ID 0x6be9
  11
  12 /* media enumeration - defined in a way that it fits onto the MC2+'s
  13    POS registers... */
  14
  15 typedef enum { Media_10Base2, Media_10BaseT,
  16         Media_10Base5, Media_Unknown, Media_Count
  17 } skmca_medium;
  18
  19 /* private structure */
  20 typedef struct {
  21         unsigned int slot;      /* MCA-Slot-#                       */
  22         void __iomem *base;
  23         void __iomem *macbase;  /* base address of MAC address PROM */
  24         void __iomem *ioregaddr;/* address of I/O-register (Lo)     */
  25         void __iomem *ctrladdr; /* address of control/stat register */
  26         void __iomem *cmdaddr;  /* address of I/O-command register  */
  27         int nextrx;             /* index of next RX descriptor to
  28                                    be read                          */
  29         int nexttxput;          /* index of next free TX descriptor */
  30         int nexttxdone;         /* index of next TX descriptor to
  31                                    be finished                      */
  32         int txbusy;             /* # of busy TX descriptors         */
  33         struct net_device_stats stat;   /* packet statistics            */
  34         int realirq;            /* memorizes actual IRQ, even when
  35                                    currently not allocated          */
  36         skmca_medium medium;    /* physical cannector               */
  37         spinlock_t lock;
  38 } skmca_priv;
  39
  40 /* card registers: control/status register bits */
  41
  42 #define CTRL_ADR_DATA      0    /* Bit 0 = 0 ->access data register  */
  43 #define CTRL_ADR_RAP       1    /* Bit 0 = 1 ->access RAP register   */
  44 #define CTRL_RW_WRITE      0    /* Bit 1 = 0 ->write register        */
  45 #define CTRL_RW_READ       2    /* Bit 1 = 1 ->read register         */
  46 #define CTRL_RESET_ON      0    /* Bit 3 = 0 ->reset board           */
  47 #define CTRL_RESET_OFF     8    /* Bit 3 = 1 ->no reset of board     */
  48
  49 #define STAT_ADR_DATA      0    /* Bit 0 of ctrl register read back  */
  50 #define STAT_ADR_RAP       1
  51 #define STAT_RW_WRITE      0    /* Bit 1 of ctrl register read back  */
  52 #define STAT_RW_READ       2
  53 #define STAT_RESET_ON      0    /* Bit 3 of ctrl register read back  */
  54 #define STAT_RESET_OFF     8
  55 #define STAT_IRQ_ACT       0    /* interrupt pending                 */
  56 #define STAT_IRQ_NOACT     16   /* no interrupt pending              */
  57 #define STAT_IO_NOBUSY     0    /* no transfer busy                  */
  58 #define STAT_IO_BUSY       32   /* transfer busy                     */
  59
  60 /* I/O command register bits */
  61
  62 #define IOCMD_GO           128  /* Bit 7 = 1 -> start register xfer  */
  63
  64 /* LANCE registers */
  65
  66 #define LANCE_CSR0         0    /* Status/Control                    */
  67
  68 #define CSR0_ERR           0x8000       /* general error flag                */
  69 #define CSR0_BABL          0x4000       /* transmitter timeout               */
  70 #define CSR0_CERR          0x2000       /* collision error                   */
  71 #define CSR0_MISS          0x1000       /* lost Rx block                     */
  72 #define CSR0_MERR          0x0800       /* memory access error               */
  73 #define CSR0_RINT          0x0400       /* receiver interrupt                */
  74 #define CSR0_TINT          0x0200       /* transmitter interrupt             */
  75 #define CSR0_IDON          0x0100       /* initialization done               */
  76 #define CSR0_INTR          0x0080       /* general interrupt flag            */
  77 #define CSR0_INEA          0x0040       /* interrupt enable                  */
  78 #define CSR0_RXON          0x0020       /* receiver enabled                  */
  79 #define CSR0_TXON          0x0010       /* transmitter enabled               */
  80 #define CSR0_TDMD          0x0008       /* force transmission now            */
  81 #define CSR0_STOP          0x0004       /* stop LANCE                        */
  82 #define CSR0_STRT          0x0002       /* start LANCE                       */
  83 #define CSR0_INIT          0x0001       /* read initialization block         */
  84
  85 #define LANCE_CSR1         1    /* addr bit 0..15 of initialization  */
  86 #define LANCE_CSR2         2    /*          16..23 block             */
  87
  88 #define LANCE_CSR3         3    /* Bus control                       */
  89 #define CSR3_BCON_HOLD     0    /* Bit 0 = 0 -> BM1,BM0,HOLD         */
  90 #define CSR3_BCON_BUSRQ    1    /* Bit 0 = 1 -> BUSAK0,BYTE,BUSRQ    */
  91 #define CSR3_ALE_HIGH      0    /* Bit 1 = 0 -> ALE asserted high    */
  92 #define CSR3_ALE_LOW       2    /* Bit 1 = 1 -> ALE asserted low     */
  93 #define CSR3_BSWAP_OFF     0    /* Bit 2 = 0 -> no byte swap         */
  94 #define CSR3_BSWAP_ON      4    /* Bit 2 = 1 -> byte swap            */
  95
  96 /* LANCE structures */
  97
  98 typedef struct {                /* LANCE initialization block        */
  99         u16 Mode;               /* mode flags                        */
 100         u8 PAdr[6];             /* MAC address                       */
 101         u8 LAdrF[8];            /* Multicast filter                  */
 102         u32 RdrP;               /* Receive descriptor                */
 103         u32 TdrP;               /* Transmit descriptor               */
 104 } LANCE_InitBlock;
 105
 106 /* Mode flags init block */
 107
 108 #define LANCE_INIT_PROM    0x8000       /* enable promiscous mode            */
 109 #define LANCE_INIT_INTL    0x0040       /* internal loopback                 */
 110 #define LANCE_INIT_DRTY    0x0020       /* disable retry                     */
 111 #define LANCE_INIT_COLL    0x0010       /* force collision                   */
 112 #define LANCE_INIT_DTCR    0x0008       /* disable transmit CRC              */
 113 #define LANCE_INIT_LOOP    0x0004       /* loopback                          */
 114 #define LANCE_INIT_DTX     0x0002       /* disable transmitter               */
 115 #define LANCE_INIT_DRX     0x0001       /* disable receiver                  */
 116
 117 typedef struct {                /* LANCE Tx descriptor               */
 118         u16 LowAddr;            /* bit 0..15 of address              */
 119         u16 Flags;              /* bit 16..23 of address + Flags     */
 120         u16 Len;                /* 2s complement of packet length    */
 121         u16 Status;             /* Result of transmission            */
 122 } LANCE_TxDescr;
 123
 124 #define TXDSCR_FLAGS_OWN   0x8000       /* LANCE owns descriptor             */
 125 #define TXDSCR_FLAGS_ERR   0x4000       /* summary error flag                */
 126 #define TXDSCR_FLAGS_MORE  0x1000       /* more than one retry needed?       */
 127 #define TXDSCR_FLAGS_ONE   0x0800       /* one retry?                        */
 128 #define TXDSCR_FLAGS_DEF   0x0400       /* transmission deferred?            */
 129 #define TXDSCR_FLAGS_STP   0x0200       /* first packet in chain?            */
 130 #define TXDSCR_FLAGS_ENP   0x0100       /* last packet in chain?             */
 131
 132 #define TXDSCR_STATUS_BUFF 0x8000       /* buffer error?                     */
 133 #define TXDSCR_STATUS_UFLO 0x4000       /* silo underflow during transmit?   */
 134 #define TXDSCR_STATUS_LCOL 0x1000       /* late collision?                   */
 135 #define TXDSCR_STATUS_LCAR 0x0800       /* loss of carrier?                  */
 136 #define TXDSCR_STATUS_RTRY 0x0400       /* retry error?                      */
 137
 138 typedef struct {                /* LANCE Rx descriptor               */
 139         u16 LowAddr;            /* bit 0..15 of address              */
 140         u16 Flags;              /* bit 16..23 of address + Flags     */
 141         u16 MaxLen;             /* 2s complement of buffer length    */
 142         u16 Len;                /* packet length                     */
 143 } LANCE_RxDescr;
 144
 145 #define RXDSCR_FLAGS_OWN   0x8000       /* LANCE owns descriptor             */
 146 #define RXDSCR_FLAGS_ERR   0x4000       /* summary error flag                */
 147 #define RXDSCR_FLAGS_FRAM  0x2000       /* framing error flag                */
 148 #define RXDSCR_FLAGS_OFLO  0x1000       /* FIFO overflow?                    */
 149 #define RXDSCR_FLAGS_CRC   0x0800       /* CRC error?                        */
 150 #define RXDSCR_FLAGS_BUFF  0x0400       /* buffer error?                     */
 151 #define RXDSCR_FLAGS_STP   0x0200       /* first packet in chain?            */
 152 #define RXDCSR_FLAGS_ENP   0x0100       /* last packet in chain?             */
 153
 154 /* RAM layout */
 155
 156 #define TXCOUNT            4    /* length of TX descriptor queue     */
 157 #define LTXCOUNT           2    /* log2 of it                        */
 158 #define RXCOUNT            4    /* length of RX descriptor queue     */
 159 #define LRXCOUNT           2    /* log2 of it                        */
 160
 161 #define RAM_INITBASE       0    /* LANCE init block                  */
 162 #define RAM_TXBASE         24   /* Start of TX descriptor queue      */
 163 #define RAM_RXBASE         \
 164 (RAM_TXBASE + (TXCOUNT * 8))    /* Start of RX descriptor queue      */
 165 #define RAM_DATABASE       \
 166 (RAM_RXBASE + (RXCOUNT * 8))    /* Start of data area for frames     */
 167 #define RAM_BUFSIZE        1580 /* max. frame size - should never be
 168                                    reached                           */
 169
 170 #endif                          /* _SK_MCA_DRIVER_ */
 171
 172 #endif  /* _SK_MCA_INCLUDE_ */