?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux-2.6.12-rc2
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / lp486e.c
blob6139f06d7d2b9b398bb1649f14f87f90d1c513f6
1 /* Intel Professional Workstation/panther ethernet driver */
2 /* lp486e.c: A panther 82596 ethernet driver for linux. */
3 /*
4 History and copyrights:
5
6 Driver skeleton
7 Written 1993 by Donald Becker.
8 Copyright 1993 United States Government as represented by the Director,
9 National Security Agency. This software may only be used and
10 distributed according to the terms of the GNU General Public License
11 as modified by SRC, incorporated herein by reference.
12
13 The author may be reached as becker@scyld.com, or C/O
14 Scyld Computing Corporation
15 410 Severn Ave., Suite 210
16 Annapolis MD 21403
17
18 Apricot
19 Written 1994 by Mark Evans.
20 This driver is for the Apricot 82596 bus-master interface
21
22 Modularised 12/94 Mark Evans
23
24 Professional Workstation
25 Derived from apricot.c by Ard van Breemen
26 <ard@murphy.nl>|<ard@cstmel.hobby.nl>|<ard@cstmel.nl.eu.org>
27
28 Credits:
29 Thanks to Murphy Software BV for letting me write this in their time.
30 Well, actually, I get payed doing this...
31 (Also: see http://www.murphy.nl for murphy, and my homepage ~ard for
32 more information on the Professional Workstation)
33
34 Present version
35 aeb@cwi.nl
36 */
37 /*
38 There are currently two motherboards that I know of in the
39 professional workstation. The only one that I know is the
40 intel panther motherboard. -- ard
41 */
42 /*
43 The pws is equipped with an intel 82596. This is a very intelligent controller
44 which runs its own micro-code. Communication with the hostprocessor is done
45 through linked lists of commands and buffers in the hostprocessors memory.
46 A complete description of the 82596 is available from intel. Search for
47 a file called "29021806.pdf". It is a complete description of the chip itself.
48 To use it for the pws some additions are needed regarding generation of
49 the PORT and CA signal, and the interrupt glue needed for a pc.
50 I/O map:
51 PORT SIZE ACTION MEANING
52 0xCB0 2 WRITE Lower 16 bits for PORT command
53 0xCB2 2 WRITE Upper 16 bits for PORT command, and issue of PORT command
54 0xCB4 1 WRITE Generation of CA signal
55 0xCB8 1 WRITE Clear interrupt glue
56 All other communication is through memory!
57 */
58
59 #define SLOW_DOWN_IO udelay(5)
60
61 #include <linux/module.h>
62 #include <linux/init.h>
63 #include <linux/delay.h>
64 #include <linux/kernel.h>
65 #include <linux/string.h>
66 #include <linux/errno.h>
67 #include <linux/ioport.h>
68 #include <linux/slab.h>
69 #include <linux/interrupt.h>
70 #include <linux/netdevice.h>
71 #include <linux/etherdevice.h>
72 #include <linux/skbuff.h>
73 #include <linux/bitops.h>
74
75 #include <asm/io.h>
76 #include <asm/dma.h>
77
78 #define DRV_NAME "lp486e"
79
80 /* debug print flags */
81 #define LOG_SRCDST 0x80000000
82 #define LOG_STATINT 0x40000000
83 #define LOG_STARTINT 0x20000000
84
85 #define i596_debug debug
86
87 static int i596_debug = 0;
88
89 static const char * const medianame[] = {
90 "10baseT", "AUI",
91 "10baseT-FD", "AUI-FD",
92 };
93
94 #define LP486E_TOTAL_SIZE 16
95
96 #define I596_NULL (0xffffffff)
97
98 #define CMD_EOL 0x8000 /* The last command of the list, stop. */
99 #define CMD_SUSP 0x4000 /* Suspend after doing cmd. */
100 #define CMD_INTR 0x2000 /* Interrupt after doing cmd. */
101
102 #define CMD_FLEX 0x0008 /* Enable flexible memory model */
103
104 enum commands {
105 CmdNOP = 0,
106 CmdIASetup = 1,
107 CmdConfigure = 2,
108 CmdMulticastList = 3,
109 CmdTx = 4,
110 CmdTDR = 5,
111 CmdDump = 6,
112 CmdDiagnose = 7
113 };
114
115 #if 0
116 static const char *CUcmdnames[8] = { "NOP", "IASetup", "Configure", "MulticastList",
117 "Tx", "TDR", "Dump", "Diagnose" };
118 #endif
119
120 /* Status word bits */
121 #define STAT_CX 0x8000 /* The CU finished executing a command
122 with the Interrupt bit set */
123 #define STAT_FR 0x4000 /* The RU finished receiving a frame */
124 #define STAT_CNA 0x2000 /* The CU left the active state */
125 #define STAT_RNR 0x1000 /* The RU left the active state */
126 #define STAT_ACK (STAT_CX | STAT_FR | STAT_CNA | STAT_RNR)
127 #define STAT_CUS 0x0700 /* Status of CU: 0: idle, 1: suspended,
128 2: active, 3-7: unused */
129 #define STAT_RUS 0x00f0 /* Status of RU: 0: idle, 1: suspended,
130 2: no resources, 4: ready,
131 10: no resources due to no more RBDs,
132 12: no more RBDs, other: unused */
133 #define STAT_T 0x0008 /* Bus throttle timers loaded */
134 #define STAT_ZERO 0x0807 /* Always zero */
135
136 #if 0
137 static char *CUstates[8] = {
138 "idle", "suspended", "active", 0, 0, 0, 0, 0
139 };
140 static char *RUstates[16] = {
141 "idle", "suspended", "no resources", 0, "ready", 0, 0, 0,
142 0, 0, "no RBDs", 0, "out of RBDs", 0, 0, 0
143 };
144
145 static void
146 i596_out_status(int status) {
147 int bad = 0;
148 char *s;
149
150 printk("status %4.4x:", status);
151 if (status == 0xffff)
152 printk(" strange..\n");
153 else {
154 if (status & STAT_CX)
155 printk(" CU done");
156 if (status & STAT_CNA)
157 printk(" CU stopped");
158 if (status & STAT_FR)
159 printk(" got a frame");
160 if (status & STAT_RNR)
161 printk(" RU stopped");
162 if (status & STAT_T)
163 printk(" throttled");
164 if (status & STAT_ZERO)
165 bad = 1;
166 s = CUstates[(status & STAT_CUS) >> 8];
167 if (!s)
168 bad = 1;
169 else
170 printk(" CU(%s)", s);
171 s = RUstates[(status & STAT_RUS) >> 4];
172 if (!s)
173 bad = 1;
174 else
175 printk(" RU(%s)", s);
176 if (bad)
177 printk(" bad status");
178 printk("\n");
179 }
180 }
181 #endif
182
183 /* Command word bits */
184 #define ACK_CX 0x8000
185 #define ACK_FR 0x4000
186 #define ACK_CNA 0x2000
187 #define ACK_RNR 0x1000
188
189 #define CUC_START 0x0100
190 #define CUC_RESUME 0x0200
191 #define CUC_SUSPEND 0x0300
192 #define CUC_ABORT 0x0400
193
194 #define RX_START 0x0010
195 #define RX_RESUME 0x0020
196 #define RX_SUSPEND 0x0030
197 #define RX_ABORT 0x0040
198
199 typedef u32 phys_addr;
200
201 static inline phys_addr
202 va_to_pa(void *x) {
203 return x ? virt_to_bus(x) : I596_NULL;
204 }
205
206 static inline void *
207 pa_to_va(phys_addr x) {
208 return (x == I596_NULL) ? NULL : bus_to_virt(x);
209 }
210
211 /* status bits for cmd */
212 #define CMD_STAT_C 0x8000 /* CU command complete */
213 #define CMD_STAT_B 0x4000 /* CU command in progress */
214 #define CMD_STAT_OK 0x2000 /* CU command completed without errors */
215 #define CMD_STAT_A 0x1000 /* CU command abnormally terminated */
216
217 struct i596_cmd { /* 8 bytes */
218 unsigned short status;
219 unsigned short command;
220 phys_addr pa_next; /* va_to_pa(struct i596_cmd *next) */
221 };
222
223 #define EOF 0x8000
224 #define SIZE_MASK 0x3fff
225
226 struct i596_tbd {
227 unsigned short size;
228 unsigned short pad;
229 phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */
230 phys_addr pa_data; /* va_to_pa(char *data) */
231 struct sk_buff *skb;
232 };
233
234 struct tx_cmd {
235 struct i596_cmd cmd;
236 phys_addr pa_tbd; /* va_to_pa(struct i596_tbd *tbd) */
237 unsigned short size;
238 unsigned short pad;
239 };
240
241 /* status bits for rfd */
242 #define RFD_STAT_C 0x8000 /* Frame reception complete */
243 #define RFD_STAT_B 0x4000 /* Frame reception in progress */
244 #define RFD_STAT_OK 0x2000 /* Frame received without errors */
245 #define RFD_STATUS 0x1fff
246 #define RFD_LENGTH_ERR 0x1000
247 #define RFD_CRC_ERR 0x0800
248 #define RFD_ALIGN_ERR 0x0400
249 #define RFD_NOBUFS_ERR 0x0200
250 #define RFD_DMA_ERR 0x0100 /* DMA overrun failure to acquire system bus */
251 #define RFD_SHORT_FRAME_ERR 0x0080
252 #define RFD_NOEOP_ERR 0x0040
253 #define RFD_TRUNC_ERR 0x0020
254 #define RFD_MULTICAST 0x0002 /* 0: destination had our address
255 1: destination was broadcast/multicast */
256 #define RFD_COLLISION 0x0001
257
258 /* receive frame descriptor */
259 struct i596_rfd {
260 unsigned short stat;
261 unsigned short cmd;
262 phys_addr pa_next; /* va_to_pa(struct i596_rfd *next) */
263 phys_addr pa_rbd; /* va_to_pa(struct i596_rbd *rbd) */
264 unsigned short count;
265 unsigned short size;
266 char data[1532];
267 };
268
269 #define RBD_EL 0x8000
270 #define RBD_P 0x4000
271 #define RBD_SIZEMASK 0x3fff
272 #define RBD_EOF 0x8000
273 #define RBD_F 0x4000
274
275 /* receive buffer descriptor */
276 struct i596_rbd {
277 unsigned short size;
278 unsigned short pad;
279 phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */
280 phys_addr pa_data; /* va_to_pa(char *data) */
281 phys_addr pa_prev; /* va_to_pa(struct i596_tbd *prev) */
282
283 /* Driver private part */
284 struct sk_buff *skb;
285 };
286
287 #define RX_RING_SIZE 64
288 #define RX_SKBSIZE (ETH_FRAME_LEN+10)
289 #define RX_RBD_SIZE 32
290
291 /* System Control Block - 40 bytes */
292 struct i596_scb {
293 u16 status; /* 0 */
294 u16 command; /* 2 */
295 phys_addr pa_cmd; /* 4 - va_to_pa(struct i596_cmd *cmd) */
296 phys_addr pa_rfd; /* 8 - va_to_pa(struct i596_rfd *rfd) */
297 u32 crc_err; /* 12 */
298 u32 align_err; /* 16 */
299 u32 resource_err; /* 20 */
300 u32 over_err; /* 24 */
301 u32 rcvdt_err; /* 28 */
302 u32 short_err; /* 32 */
303 u16 t_on; /* 36 */
304 u16 t_off; /* 38 */
305 };
306
307 /* Intermediate System Configuration Pointer - 8 bytes */
308 struct i596_iscp {
309 u32 busy; /* 0 */
310 phys_addr pa_scb; /* 4 - va_to_pa(struct i596_scb *scb) */
311 };
312
313 /* System Configuration Pointer - 12 bytes */
314 struct i596_scp {
315 u32 sysbus; /* 0 */
316 u32 pad; /* 4 */
317 phys_addr pa_iscp; /* 8 - va_to_pa(struct i596_iscp *iscp) */
318 };
319
320 /* Selftest and dump results - needs 16-byte alignment */
321 /*
322 * The size of the dump area is 304 bytes. When the dump is executed
323 * by the Port command an extra word will be appended to the dump area.
324 * The extra word is a copy of the Dump status word (containing the
325 * C, B, OK bits). [I find 0xa006, with a0 for C+OK and 6 for dump]
326 */
327 struct i596_dump {
328 u16 dump[153]; /* (304 = 130h) + 2 bytes */
329 };
330
331 struct i596_private { /* aligned to a 16-byte boundary */
332 struct i596_scp scp; /* 0 - needs 16-byte alignment */
333 struct i596_iscp iscp; /* 12 */
334 struct i596_scb scb; /* 20 */
335 u32 dummy; /* 60 */
336 struct i596_dump dump; /* 64 - needs 16-byte alignment */
337
338 struct i596_cmd set_add;
339 char eth_addr[8]; /* directly follows set_add */
340
341 struct i596_cmd set_conf;
342 char i596_config[16]; /* directly follows set_conf */
343
344 struct i596_cmd tdr;
345 unsigned long tdr_stat; /* directly follows tdr */
346
347 int last_restart;
348 struct i596_rbd *rbd_list;
349 struct i596_rbd *rbd_tail;
350 struct i596_rfd *rx_tail;
351 struct i596_cmd *cmd_tail;
352 struct i596_cmd *cmd_head;
353 int cmd_backlog;
354 unsigned long last_cmd;
355 struct net_device_stats stats;
356 spinlock_t cmd_lock;
357 };
358
359 static char init_setup[14] = {
360 0x8E, /* length 14 bytes, prefetch on */
361 0xC8, /* default: fifo to 8, monitor off */
362 0x40, /* default: don't save bad frames (apricot.c had 0x80) */
363 0x2E, /* (default is 0x26)
364 No source address insertion, 8 byte preamble */
365 0x00, /* default priority and backoff */
366 0x60, /* default interframe spacing */
367 0x00, /* default slot time LSB */
368 0xf2, /* default slot time and nr of retries */
369 0x00, /* default various bits
370 (0: promiscuous mode, 1: broadcast disable,
371 2: encoding mode, 3: transmit on no CRS,
372 4: no CRC insertion, 5: CRC type,
373 6: bit stuffing, 7: padding) */
374 0x00, /* default carrier sense and collision detect */
375 0x40, /* default minimum frame length */
376 0xff, /* (default is 0xff, and that is what apricot.c has;
377 elp486.c has 0xfb: Enable crc append in memory.) */
378 0x00, /* default: not full duplex */
379 0x7f /* (default is 0x3f) multi IA */
380 };
381
382 static int i596_open(struct net_device *dev);
383 static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
384 static irqreturn_t i596_interrupt(int irq, void *dev_id, struct pt_regs *regs);
385 static int i596_close(struct net_device *dev);
386 static struct net_device_stats *i596_get_stats(struct net_device *dev);
387 static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
388 static void print_eth(char *);
389 static void set_multicast_list(struct net_device *dev);
390 static void i596_tx_timeout(struct net_device *dev);
391
392 static int
393 i596_timeout(struct net_device *dev, char *msg, int ct) {
394 struct i596_private *lp;
395 int boguscnt = ct;
396
397 lp = (struct i596_private *) dev->priv;
398 while (lp->scb.command) {
399 if (--boguscnt == 0) {
400 printk("%s: %s timed out - stat %4.4x, cmd %4.4x\n",
401 dev->name, msg,
402 lp->scb.status, lp->scb.command);
403 return 1;
404 }
405 udelay(5);
406 barrier();
407 }
408 return 0;
409 }
410
411 static inline int
412 init_rx_bufs(struct net_device *dev, int num) {
413 struct i596_private *lp;
414 struct i596_rfd *rfd;
415 int i;
416 // struct i596_rbd *rbd;
417
418 lp = (struct i596_private *) dev->priv;
419 lp->scb.pa_rfd = I596_NULL;
420
421 for (i = 0; i < num; i++) {
422 rfd = kmalloc(sizeof(struct i596_rfd), GFP_KERNEL);
423 if (rfd == NULL)
424 break;
425
426 rfd->stat = 0;
427 rfd->pa_rbd = I596_NULL;
428 rfd->count = 0;
429 rfd->size = 1532;
430 if (i == 0) {
431 rfd->cmd = CMD_EOL;
432 lp->rx_tail = rfd;
433 } else {
434 rfd->cmd = 0;
435 }
436 rfd->pa_next = lp->scb.pa_rfd;
437 lp->scb.pa_rfd = va_to_pa(rfd);
438 lp->rx_tail->pa_next = lp->scb.pa_rfd;
439 }
440
441 #if 0
442 for (i = 0; i<RX_RBD_SIZE; i++) {
443 rbd = kmalloc(sizeof(struct i596_rbd), GFP_KERNEL);
444 if (rbd) {
445 rbd->pad = 0;
446 rbd->count = 0;
447 rbd->skb = dev_alloc_skb(RX_SKB_SIZE);
448 if (!rbd->skb) {
449 printk("dev_alloc_skb failed");
450 }
451 rbd->next = rfd->rbd;
452 if (i) {
453 rfd->rbd->prev = rbd;
454 rbd->size = RX_SKB_SIZE;
455 } else {
456 rbd->size = (RX_SKB_SIZE | RBD_EL);
457 lp->rbd_tail = rbd;
458 }
459
460 rfd->rbd = rbd;
461 } else {
462 printk("Could not kmalloc rbd\n");
463 }
464 }
465 lp->rbd_tail->next = rfd->rbd;
466 #endif
467 return (i);
468 }
469
470 static inline void
471 remove_rx_bufs(struct net_device *dev) {
472 struct i596_private *lp;
473 struct i596_rfd *rfd;
474
475 lp = (struct i596_private *) dev->priv;
476 lp->rx_tail->pa_next = I596_NULL;
477
478 do {
479 rfd = pa_to_va(lp->scb.pa_rfd);
480 lp->scb.pa_rfd = rfd->pa_next;
481 kfree(rfd);
482 } while (rfd != lp->rx_tail);
483
484 lp->rx_tail = NULL;
485
486 #if 0
487 for (lp->rbd_list) {
488 }
489 #endif
490 }
491
492 #define PORT_RESET 0x00 /* reset 82596 */
493 #define PORT_SELFTEST 0x01 /* selftest */
494 #define PORT_ALTSCP 0x02 /* alternate SCB address */
495 #define PORT_DUMP 0x03 /* dump */
496
497 #define IOADDR 0xcb0 /* real constant */
498 #define IRQ 10 /* default IRQ - can be changed by ECU */
499
500 /* The 82596 requires two 16-bit write cycles for a port command */
501 static inline void
502 PORT(phys_addr a, unsigned int cmd) {
503 if (a & 0xf)
504 printk("lp486e.c: PORT: address not aligned\n");
505 outw(((a & 0xffff) | cmd), IOADDR);
506 outw(((a>>16) & 0xffff), IOADDR+2);
507 }
508
509 static inline void
510 CA(void) {
511 outb(0, IOADDR+4);
512 udelay(8);
513 }
514
515 static inline void
516 CLEAR_INT(void) {
517 outb(0, IOADDR+8);
518 }
519
520 #define SIZE(x) (sizeof(x)/sizeof((x)[0]))
521
522 #if 0
523 /* selftest or dump */
524 static void
525 i596_port_do(struct net_device *dev, int portcmd, char *cmdname) {
526 struct i596_private *lp = dev->priv;
527 u16 *outp;
528 int i, m;
529
530 memset((void *)&(lp->dump), 0, sizeof(struct i596_dump));
531 outp = &(lp->dump.dump[0]);
532
533 PORT(va_to_pa(outp), portcmd);
534 mdelay(30); /* random, unmotivated */
535
536 printk("lp486e i82596 %s result:\n", cmdname);
537 for (m = SIZE(lp->dump.dump); m && lp->dump.dump[m-1] == 0; m--)
538 ;
539 for (i = 0; i < m; i++) {
540 printk(" %04x", lp->dump.dump[i]);
541 if (i%8 == 7)
542 printk("\n");
543 }
544 printk("\n");
545 }
546 #endif
547
548 static int
549 i596_scp_setup(struct net_device *dev) {
550 struct i596_private *lp = dev->priv;
551 int boguscnt;
552
553 /* Setup SCP, ISCP, SCB */
554 /*
555 * sysbus bits:
556 * only a single byte is significant - here 0x44
557 * 0x80: big endian mode (details depend on stepping)
558 * 0x40: 1
559 * 0x20: interrupt pin is active low
560 * 0x10: lock function disabled
561 * 0x08: external triggering of bus throttle timers
562 * 0x06: 00: 82586 compat mode, 01: segmented mode, 10: linear mode
563 * 0x01: unused
564 */
565 lp->scp.sysbus = 0x00440000; /* linear mode */
566 lp->scp.pad = 0; /* must be zero */
567 lp->scp.pa_iscp = va_to_pa(&(lp->iscp));
568
569 /*
570 * The CPU sets the ISCP to 1 before it gives the first CA()
571 */
572 lp->iscp.busy = 0x0001;
573 lp->iscp.pa_scb = va_to_pa(&(lp->scb));
574
575 lp->scb.command = 0;
576 lp->scb.status = 0;
577 lp->scb.pa_cmd = I596_NULL;
578 /* lp->scb.pa_rfd has been initialised already */
579
580 lp->last_cmd = jiffies;
581 lp->cmd_backlog = 0;
582 lp->cmd_head = NULL;
583
584 /*
585 * Reset the 82596.
586 * We need to wait 10 systemclock cycles, and
587 * 5 serial clock cycles.
588 */
589 PORT(0, PORT_RESET); /* address part ignored */
590 udelay(100);
591
592 /*
593 * Before the CA signal is asserted, the default SCP address
594 * (0x00fffff4) can be changed to a 16-byte aligned value
595 */
596 PORT(va_to_pa(&lp->scp), PORT_ALTSCP); /* change the scp address */
597
598 /*
599 * The initialization procedure begins when a
600 * Channel Attention signal is asserted after a reset.
601 */
602
603 CA();
604
605 /*
606 * The ISCP busy is cleared by the 82596 after the SCB address is read.
607 */
608 boguscnt = 100;
609 while (lp->iscp.busy) {
610 if (--boguscnt == 0) {
611 /* No i82596 present? */
612 printk("%s: i82596 initialization timed out\n",
613 dev->name);
614 return 1;
615 }
616 udelay(5);
617 barrier();
618 }
619 /* I find here boguscnt==100, so no delay was required. */
620
621 return 0;
622 }
623
624 static int
625 init_i596(struct net_device *dev) {
626 struct i596_private *lp;
627
628 if (i596_scp_setup(dev))
629 return 1;
630
631 lp = (struct i596_private *) dev->priv;
632 lp->scb.command = 0;
633
634 memcpy ((void *)lp->i596_config, init_setup, 14);
635 lp->set_conf.command = CmdConfigure;
636 i596_add_cmd(dev, (void *)&lp->set_conf);
637
638 memcpy ((void *)lp->eth_addr, dev->dev_addr, 6);
639 lp->set_add.command = CmdIASetup;
640 i596_add_cmd(dev, (struct i596_cmd *)&lp->set_add);
641
642 lp->tdr.command = CmdTDR;
643 i596_add_cmd(dev, (struct i596_cmd *)&lp->tdr);
644
645 if (lp->scb.command && i596_timeout(dev, "i82596 init", 200))
646 return 1;
647
648 lp->scb.command = RX_START;
649 CA();
650
651 barrier();
652
653 if (lp->scb.command && i596_timeout(dev, "Receive Unit start", 100))
654 return 1;
655
656 return 0;
657 }
658
659 /* Receive a single frame */
660 static inline int
661 i596_rx_one(struct net_device *dev, struct i596_private *lp,
662 struct i596_rfd *rfd, int *frames) {
663
664 if (rfd->stat & RFD_STAT_OK) {
665 /* a good frame */
666 int pkt_len = (rfd->count & 0x3fff);
667 struct sk_buff *skb = dev_alloc_skb(pkt_len);
668
669 (*frames)++;
670
671 if (rfd->cmd & CMD_EOL)
672 printk("Received on EOL\n");
673
674 if (skb == NULL) {
675 printk ("%s: i596_rx Memory squeeze, "
676 "dropping packet.\n", dev->name);
677 lp->stats.rx_dropped++;
678 return 1;
679 }
680
681 skb->dev = dev;
682 memcpy(skb_put(skb,pkt_len), rfd->data, pkt_len);
683
684 skb->protocol = eth_type_trans(skb,dev);
685 netif_rx(skb);
686 dev->last_rx = jiffies;
687 lp->stats.rx_packets++;
688 } else {
689 #if 0
690 printk("Frame reception error status %04x\n",
691 rfd->stat);
692 #endif
693 lp->stats.rx_errors++;
694 if (rfd->stat & RFD_COLLISION)
695 lp->stats.collisions++;
696 if (rfd->stat & RFD_SHORT_FRAME_ERR)
697 lp->stats.rx_length_errors++;
698 if (rfd->stat & RFD_DMA_ERR)
699 lp->stats.rx_over_errors++;
700 if (rfd->stat & RFD_NOBUFS_ERR)
701 lp->stats.rx_fifo_errors++;
702 if (rfd->stat & RFD_ALIGN_ERR)
703 lp->stats.rx_frame_errors++;
704 if (rfd->stat & RFD_CRC_ERR)
705 lp->stats.rx_crc_errors++;
706 if (rfd->stat & RFD_LENGTH_ERR)
707 lp->stats.rx_length_errors++;
708 }
709 rfd->stat = rfd->count = 0;
710 return 0;
711 }
712
713 static int
714 i596_rx(struct net_device *dev) {
715 struct i596_private *lp = (struct i596_private *) dev->priv;
716 struct i596_rfd *rfd;
717 int frames = 0;
718
719 while (1) {
720 rfd = pa_to_va(lp->scb.pa_rfd);
721 if (!rfd) {
722 printk(KERN_ERR "i596_rx: NULL rfd?\n");
723 return 0;
724 }
725 #if 1
726 if (rfd->stat && !(rfd->stat & (RFD_STAT_C | RFD_STAT_B)))
727 printk("SF:%p-%04x\n", rfd, rfd->stat);
728 #endif
729 if (!(rfd->stat & RFD_STAT_C))
730 break; /* next one not ready */
731 if (i596_rx_one(dev, lp, rfd, &frames))
732 break; /* out of memory */
733 rfd->cmd = CMD_EOL;
734 lp->rx_tail->cmd = 0;
735 lp->rx_tail = rfd;
736 lp->scb.pa_rfd = rfd->pa_next;
737 barrier();
738 }
739
740 return frames;
741 }
742
743 static void
744 i596_cleanup_cmd(struct net_device *dev) {
745 struct i596_private *lp;
746 struct i596_cmd *cmd;
747
748 lp = (struct i596_private *) dev->priv;
749 while (lp->cmd_head) {
750 cmd = (struct i596_cmd *)lp->cmd_head;
751
752 lp->cmd_head = pa_to_va(lp->cmd_head->pa_next);
753 lp->cmd_backlog--;
754
755 switch ((cmd->command) & 0x7) {
756 case CmdTx: {
757 struct tx_cmd *tx_cmd = (struct tx_cmd *) cmd;
758 struct i596_tbd * tx_cmd_tbd;
759 tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd);
760
761 dev_kfree_skb_any(tx_cmd_tbd->skb);
762
763 lp->stats.tx_errors++;
764 lp->stats.tx_aborted_errors++;
765
766 cmd->pa_next = I596_NULL;
767 kfree((unsigned char *)tx_cmd);
768 netif_wake_queue(dev);
769 break;
770 }
771 case CmdMulticastList: {
772 // unsigned short count = *((unsigned short *) (ptr + 1));
773
774 cmd->pa_next = I596_NULL;
775 kfree((unsigned char *)cmd);
776 break;
777 }
778 default: {
779 cmd->pa_next = I596_NULL;
780 break;
781 }
782 }
783 barrier();
784 }
785
786 if (lp->scb.command && i596_timeout(dev, "i596_cleanup_cmd", 100))
787 ;
788
789 lp->scb.pa_cmd = va_to_pa(lp->cmd_head);
790 }
791
792 static void i596_reset(struct net_device *dev, struct i596_private *lp, int ioaddr) {
793
794 if (lp->scb.command && i596_timeout(dev, "i596_reset", 100))
795 ;
796
797 netif_stop_queue(dev);
798
799 lp->scb.command = CUC_ABORT | RX_ABORT;
800 CA();
801 barrier();
802
803 /* wait for shutdown */
804 if (lp->scb.command && i596_timeout(dev, "i596_reset(2)", 400))
805 ;
806
807 i596_cleanup_cmd(dev);
808 i596_rx(dev);
809
810 netif_start_queue(dev);
811 /*dev_kfree_skb(skb, FREE_WRITE);*/
812 init_i596(dev);
813 }
814
815 static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd) {
816 struct i596_private *lp = dev->priv;
817 int ioaddr = dev->base_addr;
818 unsigned long flags;
819
820 cmd->status = 0;
821 cmd->command |= (CMD_EOL | CMD_INTR);
822 cmd->pa_next = I596_NULL;
823
824 spin_lock_irqsave(&lp->cmd_lock, flags);
825
826 if (lp->cmd_head) {
827 lp->cmd_tail->pa_next = va_to_pa(cmd);
828 } else {
829 lp->cmd_head = cmd;
830 if (lp->scb.command && i596_timeout(dev, "i596_add_cmd", 100))
831 ;
832 lp->scb.pa_cmd = va_to_pa(cmd);
833 lp->scb.command = CUC_START;
834 CA();
835 }
836 lp->cmd_tail = cmd;
837 lp->cmd_backlog++;
838
839 lp->cmd_head = pa_to_va(lp->scb.pa_cmd);
840 spin_unlock_irqrestore(&lp->cmd_lock, flags);
841
842 if (lp->cmd_backlog > 16) {
843 int tickssofar = jiffies - lp->last_cmd;
844 if (tickssofar < HZ/4)
845 return;
846
847 printk(KERN_WARNING "%s: command unit timed out, status resetting.\n", dev->name);
848 i596_reset(dev, lp, ioaddr);
849 }
850 }
851
852 static int i596_open(struct net_device *dev)
853 {
854 int i;
855
856 i = request_irq(dev->irq, &i596_interrupt, SA_SHIRQ, dev->name, dev);
857 if (i) {
858 printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
859 return i;
860 }
861
862 if ((i = init_rx_bufs(dev, RX_RING_SIZE)) < RX_RING_SIZE)
863 printk(KERN_ERR "%s: only able to allocate %d receive buffers\n", dev->name, i);
864
865 if (i < 4) {
866 free_irq(dev->irq, dev);
867 return -EAGAIN;
868 }
869 netif_start_queue(dev);
870 init_i596(dev);
871 return 0; /* Always succeed */
872 }
873
874 static int i596_start_xmit (struct sk_buff *skb, struct net_device *dev) {
875 struct i596_private *lp = dev->priv;
876 struct tx_cmd *tx_cmd;
877 short length;
878
879 length = skb->len;
880
881 if (length < ETH_ZLEN) {
882 skb = skb_padto(skb, ETH_ZLEN);
883 if (skb == NULL)
884 return 0;
885 length = ETH_ZLEN;
886 }
887
888 dev->trans_start = jiffies;
889
890 tx_cmd = (struct tx_cmd *) kmalloc ((sizeof (struct tx_cmd) + sizeof (struct i596_tbd)), GFP_ATOMIC);
891 if (tx_cmd == NULL) {
892 printk(KERN_WARNING "%s: i596_xmit Memory squeeze, dropping packet.\n", dev->name);
893 lp->stats.tx_dropped++;
894 dev_kfree_skb (skb);
895 } else {
896 struct i596_tbd *tx_cmd_tbd;
897 tx_cmd_tbd = (struct i596_tbd *) (tx_cmd + 1);
898 tx_cmd->pa_tbd = va_to_pa (tx_cmd_tbd);
899 tx_cmd_tbd->pa_next = I596_NULL;
900
901 tx_cmd->cmd.command = (CMD_FLEX | CmdTx);
902
903 tx_cmd->pad = 0;
904 tx_cmd->size = 0;
905 tx_cmd_tbd->pad = 0;
906 tx_cmd_tbd->size = (EOF | length);
907
908 tx_cmd_tbd->pa_data = va_to_pa (skb->data);
909 tx_cmd_tbd->skb = skb;
910
911 if (i596_debug & LOG_SRCDST)
912 print_eth (skb->data);
913
914 i596_add_cmd (dev, (struct i596_cmd *) tx_cmd);
915
916 lp->stats.tx_packets++;
917 }
918
919 return 0;
920 }
921
922 static void
923 i596_tx_timeout (struct net_device *dev) {
924 struct i596_private *lp = dev->priv;
925 int ioaddr = dev->base_addr;
926
927 /* Transmitter timeout, serious problems. */
928 printk(KERN_WARNING "%s: transmit timed out, status resetting.\n", dev->name);
929 lp->stats.tx_errors++;
930
931 /* Try to restart the adaptor */
932 if (lp->last_restart == lp->stats.tx_packets) {
933 printk ("Resetting board.\n");
934
935 /* Shutdown and restart */
936 i596_reset (dev, lp, ioaddr);
937 } else {
938 /* Issue a channel attention signal */
939 printk ("Kicking board.\n");
940 lp->scb.command = (CUC_START | RX_START);
941 CA();
942 lp->last_restart = lp->stats.tx_packets;
943 }
944 netif_wake_queue(dev);
945 }
946
947 static void print_eth(char *add)
948 {
949 int i;
950
951 printk ("Dest ");
952 for (i = 0; i < 6; i++)
953 printk(" %2.2X", (unsigned char) add[i]);
954 printk ("\n");
955
956 printk ("Source");
957 for (i = 0; i < 6; i++)
958 printk(" %2.2X", (unsigned char) add[i+6]);
959 printk ("\n");
960
961 printk ("type %2.2X%2.2X\n",
962 (unsigned char) add[12], (unsigned char) add[13]);
963 }
964
965 static int __init lp486e_probe(struct net_device *dev) {
966 struct i596_private *lp;
967 unsigned char eth_addr[6] = { 0, 0xaa, 0, 0, 0, 0 };
968 unsigned char *bios;
969 int i, j;
970 int ret = -ENOMEM;
971 static int probed;
972
973 if (probed)
974 return -ENODEV;
975 probed++;
976
977 if (!request_region(IOADDR, LP486E_TOTAL_SIZE, DRV_NAME)) {
978 printk(KERN_ERR "lp486e: IO address 0x%x in use\n", IOADDR);
979 return -EBUSY;
980 }
981
982 lp = (struct i596_private *) dev->priv;
983 spin_lock_init(&lp->cmd_lock);
984
985 /*
986 * Do we really have this thing?
987 */
988 if (i596_scp_setup(dev)) {
989 ret = -ENODEV;
990 goto err_out_kfree;
991 }
992
993 dev->base_addr = IOADDR;
994 dev->irq = IRQ;
995
996
997 /*
998 * How do we find the ethernet address? I don't know.
999 * One possibility is to look at the EISA configuration area
1000 * [0xe8000-0xe9fff]. This contains the ethernet address
1001 * but not at a fixed address - things depend on setup options.
1002 *
1003 * If we find no address, or the wrong address, use
1004 * ifconfig eth0 hw ether a1:a2:a3:a4:a5:a6
1005 * with the value found in the BIOS setup.
1006 */
1007 bios = bus_to_virt(0xe8000);
1008 for (j = 0; j < 0x2000; j++) {
1009 if (bios[j] == 0 && bios[j+1] == 0xaa && bios[j+2] == 0) {
1010 printk("%s: maybe address at BIOS 0x%x:",
1011 dev->name, 0xe8000+j);
1012 for (i = 0; i < 6; i++) {
1013 eth_addr[i] = bios[i+j];
1014 printk(" %2.2X", eth_addr[i]);
1015 }
1016 printk("\n");
1017 }
1018 }
1019
1020 printk("%s: lp486e 82596 at %#3lx, IRQ %d,",
1021 dev->name, dev->base_addr, dev->irq);
1022 for (i = 0; i < 6; i++)
1023 printk(" %2.2X", dev->dev_addr[i] = eth_addr[i]);
1024 printk("\n");
1025
1026 /* The LP486E-specific entries in the device structure. */
1027 dev->open = &i596_open;
1028 dev->stop = &i596_close;
1029 dev->hard_start_xmit = &i596_start_xmit;
1030 dev->get_stats = &i596_get_stats;
1031 dev->set_multicast_list = &set_multicast_list;
1032 dev->watchdog_timeo = 5*HZ;
1033 dev->tx_timeout = i596_tx_timeout;
1034
1035 #if 0
1036 /* selftest reports 0x320925ae - don't know what that means */
1037 i596_port_do(dev, PORT_SELFTEST, "selftest");
1038 i596_port_do(dev, PORT_DUMP, "dump");
1039 #endif
1040 return 0;
1041
1042 err_out_kfree:
1043 release_region(IOADDR, LP486E_TOTAL_SIZE);
1044 return ret;
1045 }
1046
1047 static inline void
1048 i596_handle_CU_completion(struct net_device *dev,
1049 struct i596_private *lp,
1050 unsigned short status,
1051 unsigned short *ack_cmdp) {
1052 struct i596_cmd *cmd;
1053 int frames_out = 0;
1054 int commands_done = 0;
1055 int cmd_val;
1056 unsigned long flags;
1057
1058 spin_lock_irqsave(&lp->cmd_lock, flags);
1059 cmd = lp->cmd_head;
1060
1061 while (lp->cmd_head && (lp->cmd_head->status & CMD_STAT_C)) {
1062 cmd = lp->cmd_head;
1063
1064 lp->cmd_head = pa_to_va(lp->cmd_head->pa_next);
1065 lp->cmd_backlog--;
1066
1067 commands_done++;
1068 cmd_val = cmd->command & 0x7;
1069 #if 0
1070 printk("finished CU %s command (%d)\n",
1071 CUcmdnames[cmd_val], cmd_val);
1072 #endif
1073 switch (cmd_val) {
1074 case CmdTx:
1075 {
1076 struct tx_cmd *tx_cmd;
1077 struct i596_tbd *tx_cmd_tbd;
1078
1079 tx_cmd = (struct tx_cmd *) cmd;
1080 tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd);
1081
1082 frames_out++;
1083 if (cmd->status & CMD_STAT_OK) {
1084 if (i596_debug)
1085 print_eth(pa_to_va(tx_cmd_tbd->pa_data));
1086 } else {
1087 lp->stats.tx_errors++;
1088 if (i596_debug)
1089 printk("transmission failure:%04x\n",
1090 cmd->status);
1091 if (cmd->status & 0x0020)
1092 lp->stats.collisions++;
1093 if (!(cmd->status & 0x0040))
1094 lp->stats.tx_heartbeat_errors++;
1095 if (cmd->status & 0x0400)
1096 lp->stats.tx_carrier_errors++;
1097 if (cmd->status & 0x0800)
1098 lp->stats.collisions++;
1099 if (cmd->status & 0x1000)
1100 lp->stats.tx_aborted_errors++;
1101 }
1102 dev_kfree_skb_irq(tx_cmd_tbd->skb);
1103
1104 cmd->pa_next = I596_NULL;
1105 kfree((unsigned char *)tx_cmd);
1106 netif_wake_queue(dev);
1107 break;
1108 }
1109
1110 case CmdMulticastList:
1111 cmd->pa_next = I596_NULL;
1112 kfree((unsigned char *)cmd);
1113 break;
1114
1115 case CmdTDR:
1116 {
1117 unsigned long status = *((unsigned long *) (cmd + 1));
1118 if (status & 0x8000) {
1119 if (i596_debug)
1120 printk("%s: link ok.\n", dev->name);
1121 } else {
1122 if (status & 0x4000)
1123 printk("%s: Transceiver problem.\n",
1124 dev->name);
1125 if (status & 0x2000)
1126 printk("%s: Termination problem.\n",
1127 dev->name);
1128 if (status & 0x1000)
1129 printk("%s: Short circuit.\n",
1130 dev->name);
1131 printk("%s: Time %ld.\n",
1132 dev->name, status & 0x07ff);
1133 }
1134 }
1135 default:
1136 cmd->pa_next = I596_NULL;
1137 lp->last_cmd = jiffies;
1138
1139 }
1140 barrier();
1141 }
1142
1143 cmd = lp->cmd_head;
1144 while (cmd && (cmd != lp->cmd_tail)) {
1145 cmd->command &= 0x1fff;
1146 cmd = pa_to_va(cmd->pa_next);
1147 barrier();
1148 }
1149
1150 if (lp->cmd_head)
1151 *ack_cmdp |= CUC_START;
1152 lp->scb.pa_cmd = va_to_pa(lp->cmd_head);
1153 spin_unlock_irqrestore(&lp->cmd_lock, flags);
1154 }
1155
1156 static irqreturn_t
1157 i596_interrupt (int irq, void *dev_instance, struct pt_regs *regs) {
1158 struct net_device *dev = (struct net_device *) dev_instance;
1159 struct i596_private *lp;
1160 unsigned short status, ack_cmd = 0;
1161 int frames_in = 0;
1162
1163 lp = (struct i596_private *) dev->priv;
1164
1165 /*
1166 * The 82596 examines the command, performs the required action,
1167 * and then clears the SCB command word.
1168 */
1169 if (lp->scb.command && i596_timeout(dev, "interrupt", 40))
1170 ;
1171
1172 /*
1173 * The status word indicates the status of the 82596.
1174 * It is modified only by the 82596.
1175 *
1176 * [So, we must not clear it. I find often status 0xffff,
1177 * which is not one of the values allowed by the docs.]
1178 */
1179 status = lp->scb.status;
1180 #if 0
1181 if (i596_debug) {
1182 printk("%s: i596 interrupt, ", dev->name);
1183 i596_out_status(status);
1184 }
1185 #endif
1186 /* Impossible, but it happens - perhaps when we get
1187 a receive interrupt but scb.pa_rfd is I596_NULL. */
1188 if (status == 0xffff) {
1189 printk("%s: i596_interrupt: got status 0xffff\n", dev->name);
1190 goto out;
1191 }
1192
1193 ack_cmd = (status & STAT_ACK);
1194
1195 if (status & (STAT_CX | STAT_CNA))
1196 i596_handle_CU_completion(dev, lp, status, &ack_cmd);
1197
1198 if (status & (STAT_FR | STAT_RNR)) {
1199 /* Restart the receive unit when it got inactive somehow */
1200 if ((status & STAT_RNR) && netif_running(dev))
1201 ack_cmd |= RX_START;
1202
1203 if (status & STAT_FR) {
1204 frames_in = i596_rx(dev);
1205 if (!frames_in)
1206 printk("receive frame reported, but no frames\n");
1207 }
1208 }
1209
1210 /* acknowledge the interrupt */
1211 /*
1212 if ((lp->scb.pa_cmd != I596_NULL) && netif_running(dev))
1213 ack_cmd |= CUC_START;
1214 */
1215
1216 if (lp->scb.command && i596_timeout(dev, "i596 interrupt", 100))
1217 ;
1218
1219 lp->scb.command = ack_cmd;
1220
1221 CLEAR_INT();
1222 CA();
1223
1224 out:
1225 return IRQ_HANDLED;
1226 }
1227
1228 static int i596_close(struct net_device *dev) {
1229 struct i596_private *lp = dev->priv;
1230
1231 netif_stop_queue(dev);
1232
1233 if (i596_debug)
1234 printk("%s: Shutting down ethercard, status was %4.4x.\n",
1235 dev->name, lp->scb.status);
1236
1237 lp->scb.command = (CUC_ABORT | RX_ABORT);
1238 CA();
1239
1240 i596_cleanup_cmd(dev);
1241
1242 if (lp->scb.command && i596_timeout(dev, "i596_close", 200))
1243 ;
1244
1245 free_irq(dev->irq, dev);
1246 remove_rx_bufs(dev);
1247
1248 return 0;
1249 }
1250
1251 static struct net_device_stats * i596_get_stats(struct net_device *dev) {
1252 struct i596_private *lp = dev->priv;
1253
1254 return &lp->stats;
1255 }
1256
1257 /*
1258 * Set or clear the multicast filter for this adaptor.
1259 */
1260
1261 static void set_multicast_list(struct net_device *dev) {
1262 struct i596_private *lp = dev->priv;
1263 struct i596_cmd *cmd;
1264
1265 if (i596_debug > 1)
1266 printk ("%s: set multicast list %d\n",
1267 dev->name, dev->mc_count);
1268
1269 if (dev->mc_count > 0) {
1270 struct dev_mc_list *dmi;
1271 char *cp;
1272 cmd = (struct i596_cmd *)kmalloc(sizeof(struct i596_cmd)+2+dev->mc_count*6, GFP_ATOMIC);
1273 if (cmd == NULL) {
1274 printk (KERN_ERR "%s: set_multicast Memory squeeze.\n", dev->name);
1275 return;
1276 }
1277 cmd->command = CmdMulticastList;
1278 *((unsigned short *) (cmd + 1)) = dev->mc_count * 6;
1279 cp = ((char *)(cmd + 1))+2;
1280 for (dmi = dev->mc_list; dmi != NULL; dmi = dmi->next) {
1281 memcpy(cp, dmi,6);
1282 cp += 6;
1283 }
1284 if (i596_debug & LOG_SRCDST)
1285 print_eth (((char *)(cmd + 1)) + 2);
1286 i596_add_cmd(dev, cmd);
1287 } else {
1288 if (lp->set_conf.pa_next != I596_NULL) {
1289 return;
1290 }
1291 if (dev->mc_count == 0 && !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
1292 if (dev->flags & IFF_ALLMULTI)
1293 dev->flags |= IFF_PROMISC;
1294 lp->i596_config[8] &= ~0x01;
1295 } else {
1296 lp->i596_config[8] |= 0x01;
1297 }
1298
1299 i596_add_cmd(dev, (struct i596_cmd *) &lp->set_conf);
1300 }
1301 }
1302
1303 MODULE_AUTHOR("Ard van Breemen <ard@cstmel.nl.eu.org>");
1304 MODULE_DESCRIPTION("Intel Panther onboard i82596 driver");
1305 MODULE_LICENSE("GPL");
1306
1307 static struct net_device *dev_lp486e;
1308 static int full_duplex;
1309 static int options;
1310 static int io = IOADDR;
1311 static int irq = IRQ;
1312
1313 module_param(debug, int, 0);
1314 //module_param(max_interrupt_work, int, 0);
1315 //module_param(reverse_probe, int, 0);
1316 //module_param(rx_copybreak, int, 0);
1317 module_param(options, int, 0);
1318 module_param(full_duplex, int, 0);
1319
1320 static int __init lp486e_init_module(void) {
1321 int err;
1322 struct net_device *dev = alloc_etherdev(sizeof(struct i596_private));
1323 if (!dev)
1324 return -ENOMEM;
1325
1326 dev->irq = irq;
1327 dev->base_addr = io;
1328 err = lp486e_probe(dev);
1329 if (err) {
1330 free_netdev(dev);
1331 return err;
1332 }
1333 err = register_netdev(dev);
1334 if (err) {
1335 release_region(dev->base_addr, LP486E_TOTAL_SIZE);
1336 free_netdev(dev);
1337 return err;
1338 }
1339 dev_lp486e = dev;
1340 full_duplex = 0;
1341 options = 0;
1342 return 0;
1343 }
1344
1345 static void __exit lp486e_cleanup_module(void) {
1346 unregister_netdev(dev_lp486e);
1347 release_region(dev_lp486e->base_addr, LP486E_TOTAL_SIZE);
1348 free_netdev(dev_lp486e);
1349 }
1350
1351 module_init(lp486e_init_module);
1352 module_exit(lp486e_cleanup_module);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree