Linux-2.6.12-rc2
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / mtd / maps / nettel.c
blob61be5a4148c9abdae5d56e02b99fe709a9862eb2
1 /****************************************************************************/
3 /*
4 * nettel.c -- mappings for NETtel/SecureEdge/SnapGear (x86) boards.
6 * (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com)
7 * (C) Copyright 2001-2002, SnapGear (www.snapgear.com)
9 * $Id: nettel.c,v 1.10 2005/01/05 17:11:29 dwmw2 Exp $
12 /****************************************************************************/
14 #include <linux/module.h>
15 #include <linux/init.h>
16 #include <linux/types.h>
17 #include <linux/kernel.h>
18 #include <linux/mtd/mtd.h>
19 #include <linux/mtd/map.h>
20 #include <linux/mtd/partitions.h>
21 #include <linux/mtd/cfi.h>
22 #include <linux/reboot.h>
23 #include <asm/io.h>
25 /****************************************************************************/
27 #define INTEL_BUSWIDTH 1
28 #define AMD_WINDOW_MAXSIZE 0x00200000
29 #define AMD_BUSWIDTH 1
32 * PAR masks and shifts, assuming 64K pages.
34 #define SC520_PAR_ADDR_MASK 0x00003fff
35 #define SC520_PAR_ADDR_SHIFT 16
36 #define SC520_PAR_TO_ADDR(par) \
37 (((par)&SC520_PAR_ADDR_MASK) << SC520_PAR_ADDR_SHIFT)
39 #define SC520_PAR_SIZE_MASK 0x01ffc000
40 #define SC520_PAR_SIZE_SHIFT 2
41 #define SC520_PAR_TO_SIZE(par) \
42 ((((par)&SC520_PAR_SIZE_MASK) << SC520_PAR_SIZE_SHIFT) + (64*1024))
44 #define SC520_PAR(cs, addr, size) \
45 ((cs) | \
46 ((((size)-(64*1024)) >> SC520_PAR_SIZE_SHIFT) & SC520_PAR_SIZE_MASK) | \
47 (((addr) >> SC520_PAR_ADDR_SHIFT) & SC520_PAR_ADDR_MASK))
49 #define SC520_PAR_BOOTCS 0x8a000000
50 #define SC520_PAR_ROMCS1 0xaa000000
51 #define SC520_PAR_ROMCS2 0xca000000 /* Cache disabled, 64K page */
53 static void *nettel_mmcrp = NULL;
55 #ifdef CONFIG_MTD_CFI_INTELEXT
56 static struct mtd_info *intel_mtd;
57 #endif
58 static struct mtd_info *amd_mtd;
60 /****************************************************************************/
62 /****************************************************************************/
64 #ifdef CONFIG_MTD_CFI_INTELEXT
65 static struct map_info nettel_intel_map = {
66 .name = "SnapGear Intel",
67 .size = 0,
68 .bankwidth = INTEL_BUSWIDTH,
71 static struct mtd_partition nettel_intel_partitions[] = {
73 .name = "SnapGear kernel",
74 .offset = 0,
75 .size = 0x000e0000
78 .name = "SnapGear filesystem",
79 .offset = 0x00100000,
82 .name = "SnapGear config",
83 .offset = 0x000e0000,
84 .size = 0x00020000
87 .name = "SnapGear Intel",
88 .offset = 0
91 .name = "SnapGear BIOS Config",
92 .offset = 0x007e0000,
93 .size = 0x00020000
96 .name = "SnapGear BIOS",
97 .offset = 0x007e0000,
98 .size = 0x00020000
101 #endif
103 static struct map_info nettel_amd_map = {
104 .name = "SnapGear AMD",
105 .size = AMD_WINDOW_MAXSIZE,
106 .bankwidth = AMD_BUSWIDTH,
109 static struct mtd_partition nettel_amd_partitions[] = {
111 .name = "SnapGear BIOS config",
112 .offset = 0x000e0000,
113 .size = 0x00010000
116 .name = "SnapGear BIOS",
117 .offset = 0x000f0000,
118 .size = 0x00010000
121 .name = "SnapGear AMD",
122 .offset = 0
125 .name = "SnapGear high BIOS",
126 .offset = 0x001f0000,
127 .size = 0x00010000
131 #define NUM_AMD_PARTITIONS \
132 (sizeof(nettel_amd_partitions)/sizeof(nettel_amd_partitions[0]))
134 /****************************************************************************/
136 #ifdef CONFIG_MTD_CFI_INTELEXT
139 * Set the Intel flash back to read mode since some old boot
140 * loaders don't.
142 static int nettel_reboot_notifier(struct notifier_block *nb, unsigned long val, void *v)
144 struct cfi_private *cfi = nettel_intel_map.fldrv_priv;
145 unsigned long b;
147 /* Make sure all FLASH chips are put back into read mode */
148 for (b = 0; (b < nettel_intel_partitions[3].size); b += 0x100000) {
149 cfi_send_gen_cmd(0xff, 0x55, b, &nettel_intel_map, cfi,
150 cfi->device_type, NULL);
152 return(NOTIFY_OK);
155 static struct notifier_block nettel_notifier_block = {
156 nettel_reboot_notifier, NULL, 0
160 * Erase the configuration file system.
161 * Used to support the software reset button.
163 static void nettel_erasecallback(struct erase_info *done)
165 wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
166 wake_up(wait_q);
169 static struct erase_info nettel_erase;
171 int nettel_eraseconfig(void)
173 struct mtd_info *mtd;
174 DECLARE_WAITQUEUE(wait, current);
175 wait_queue_head_t wait_q;
176 int ret;
178 init_waitqueue_head(&wait_q);
179 mtd = get_mtd_device(NULL, 2);
180 if (mtd) {
181 nettel_erase.mtd = mtd;
182 nettel_erase.callback = nettel_erasecallback;
183 nettel_erase.callback = NULL;
184 nettel_erase.addr = 0;
185 nettel_erase.len = mtd->size;
186 nettel_erase.priv = (u_long) &wait_q;
187 nettel_erase.priv = 0;
189 set_current_state(TASK_INTERRUPTIBLE);
190 add_wait_queue(&wait_q, &wait);
192 ret = MTD_ERASE(mtd, &nettel_erase);
193 if (ret) {
194 set_current_state(TASK_RUNNING);
195 remove_wait_queue(&wait_q, &wait);
196 put_mtd_device(mtd);
197 return(ret);
200 schedule(); /* Wait for erase to finish. */
201 remove_wait_queue(&wait_q, &wait);
203 put_mtd_device(mtd);
206 return(0);
209 #else
211 int nettel_eraseconfig(void)
213 return(0);
216 #endif
218 /****************************************************************************/
220 int __init nettel_init(void)
222 volatile unsigned long *amdpar;
223 unsigned long amdaddr, maxsize;
224 int num_amd_partitions=0;
225 #ifdef CONFIG_MTD_CFI_INTELEXT
226 volatile unsigned long *intel0par, *intel1par;
227 unsigned long orig_bootcspar, orig_romcs1par;
228 unsigned long intel0addr, intel0size;
229 unsigned long intel1addr, intel1size;
230 int intelboot, intel0cs, intel1cs;
231 int num_intel_partitions;
232 #endif
233 int rc = 0;
235 nettel_mmcrp = (void *) ioremap_nocache(0xfffef000, 4096);
236 if (nettel_mmcrp == NULL) {
237 printk("SNAPGEAR: failed to disable MMCR cache??\n");
238 return(-EIO);
241 /* Set CPU clock to be 33.000MHz */
242 *((unsigned char *) (nettel_mmcrp + 0xc64)) = 0x01;
244 amdpar = (volatile unsigned long *) (nettel_mmcrp + 0xc4);
246 #ifdef CONFIG_MTD_CFI_INTELEXT
247 intelboot = 0;
248 intel0cs = SC520_PAR_ROMCS1;
249 intel0par = (volatile unsigned long *) (nettel_mmcrp + 0xc0);
250 intel1cs = SC520_PAR_ROMCS2;
251 intel1par = (volatile unsigned long *) (nettel_mmcrp + 0xbc);
254 * Save the CS settings then ensure ROMCS1 and ROMCS2 are off,
255 * otherwise they might clash with where we try to map BOOTCS.
257 orig_bootcspar = *amdpar;
258 orig_romcs1par = *intel0par;
259 *intel0par = 0;
260 *intel1par = 0;
261 #endif
264 * The first thing to do is determine if we have a separate
265 * boot FLASH device. Typically this is a small (1 to 2MB)
266 * AMD FLASH part. It seems that device size is about the
267 * only way to tell if this is the case...
269 amdaddr = 0x20000000;
270 maxsize = AMD_WINDOW_MAXSIZE;
272 *amdpar = SC520_PAR(SC520_PAR_BOOTCS, amdaddr, maxsize);
273 __asm__ ("wbinvd");
275 nettel_amd_map.phys = amdaddr;
276 nettel_amd_map.virt = ioremap_nocache(amdaddr, maxsize);
277 if (!nettel_amd_map.virt) {
278 printk("SNAPGEAR: failed to ioremap() BOOTCS\n");
279 return(-EIO);
281 simple_map_init(&nettel_amd_map);
283 if ((amd_mtd = do_map_probe("jedec_probe", &nettel_amd_map))) {
284 printk(KERN_NOTICE "SNAPGEAR: AMD flash device size = %dK\n",
285 amd_mtd->size>>10);
287 amd_mtd->owner = THIS_MODULE;
289 /* The high BIOS partition is only present for 2MB units */
290 num_amd_partitions = NUM_AMD_PARTITIONS;
291 if (amd_mtd->size < AMD_WINDOW_MAXSIZE)
292 num_amd_partitions--;
293 /* Don't add the partition until after the primary INTEL's */
295 #ifdef CONFIG_MTD_CFI_INTELEXT
297 * Map the Intel flash into memory after the AMD
298 * It has to start on a multiple of maxsize.
300 maxsize = SC520_PAR_TO_SIZE(orig_romcs1par);
301 if (maxsize < (32 * 1024 * 1024))
302 maxsize = (32 * 1024 * 1024);
303 intel0addr = amdaddr + maxsize;
304 #endif
305 } else {
306 #ifdef CONFIG_MTD_CFI_INTELEXT
307 /* INTEL boot FLASH */
308 intelboot++;
310 if (!orig_romcs1par) {
311 intel0cs = SC520_PAR_BOOTCS;
312 intel0par = (volatile unsigned long *)
313 (nettel_mmcrp + 0xc4);
314 intel1cs = SC520_PAR_ROMCS1;
315 intel1par = (volatile unsigned long *)
316 (nettel_mmcrp + 0xc0);
318 intel0addr = SC520_PAR_TO_ADDR(orig_bootcspar);
319 maxsize = SC520_PAR_TO_SIZE(orig_bootcspar);
320 } else {
321 /* Kernel base is on ROMCS1, not BOOTCS */
322 intel0cs = SC520_PAR_ROMCS1;
323 intel0par = (volatile unsigned long *)
324 (nettel_mmcrp + 0xc0);
325 intel1cs = SC520_PAR_BOOTCS;
326 intel1par = (volatile unsigned long *)
327 (nettel_mmcrp + 0xc4);
329 intel0addr = SC520_PAR_TO_ADDR(orig_romcs1par);
330 maxsize = SC520_PAR_TO_SIZE(orig_romcs1par);
333 /* Destroy useless AMD MTD mapping */
334 amd_mtd = NULL;
335 iounmap(nettel_amd_map.virt);
336 nettel_amd_map.virt = NULL;
337 #else
338 /* Only AMD flash supported */
339 return(-ENXIO);
340 #endif
343 #ifdef CONFIG_MTD_CFI_INTELEXT
345 * We have determined the INTEL FLASH configuration, so lets
346 * go ahead and probe for them now.
349 /* Set PAR to the maximum size */
350 if (maxsize < (32 * 1024 * 1024))
351 maxsize = (32 * 1024 * 1024);
352 *intel0par = SC520_PAR(intel0cs, intel0addr, maxsize);
354 /* Turn other PAR off so the first probe doesn't find it */
355 *intel1par = 0;
357 /* Probe for the the size of the first Intel flash */
358 nettel_intel_map.size = maxsize;
359 nettel_intel_map.phys = intel0addr;
360 nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize);
361 if (!nettel_intel_map.virt) {
362 printk("SNAPGEAR: failed to ioremap() ROMCS1\n");
363 return(-EIO);
365 simple_map_init(&nettel_intel_map);
367 intel_mtd = do_map_probe("cfi_probe", &nettel_intel_map);
368 if (!intel_mtd) {
369 iounmap(nettel_intel_map.virt);
370 return(-ENXIO);
373 /* Set PAR to the detected size */
374 intel0size = intel_mtd->size;
375 *intel0par = SC520_PAR(intel0cs, intel0addr, intel0size);
378 * Map second Intel FLASH right after first. Set its size to the
379 * same maxsize used for the first Intel FLASH.
381 intel1addr = intel0addr + intel0size;
382 *intel1par = SC520_PAR(intel1cs, intel1addr, maxsize);
383 __asm__ ("wbinvd");
385 maxsize += intel0size;
387 /* Delete the old map and probe again to do both chips */
388 map_destroy(intel_mtd);
389 intel_mtd = NULL;
390 iounmap(nettel_intel_map.virt);
392 nettel_intel_map.size = maxsize;
393 nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize);
394 if (!nettel_intel_map.virt) {
395 printk("SNAPGEAR: failed to ioremap() ROMCS1/2\n");
396 return(-EIO);
399 intel_mtd = do_map_probe("cfi_probe", &nettel_intel_map);
400 if (! intel_mtd) {
401 iounmap((void *) nettel_intel_map.virt);
402 return(-ENXIO);
405 intel1size = intel_mtd->size - intel0size;
406 if (intel1size > 0) {
407 *intel1par = SC520_PAR(intel1cs, intel1addr, intel1size);
408 __asm__ ("wbinvd");
409 } else {
410 *intel1par = 0;
413 printk(KERN_NOTICE "SNAPGEAR: Intel flash device size = %dK\n",
414 (intel_mtd->size >> 10));
416 intel_mtd->owner = THIS_MODULE;
418 #ifndef CONFIG_BLK_DEV_INITRD
419 ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 1);
420 #endif
422 num_intel_partitions = sizeof(nettel_intel_partitions) /
423 sizeof(nettel_intel_partitions[0]);
425 if (intelboot) {
427 * Adjust offset and size of last boot partition.
428 * Must allow for BIOS region at end of FLASH.
430 nettel_intel_partitions[1].size = (intel0size + intel1size) -
431 (1024*1024 + intel_mtd->erasesize);
432 nettel_intel_partitions[3].size = intel0size + intel1size;
433 nettel_intel_partitions[4].offset =
434 (intel0size + intel1size) - intel_mtd->erasesize;
435 nettel_intel_partitions[4].size = intel_mtd->erasesize;
436 nettel_intel_partitions[5].offset =
437 nettel_intel_partitions[4].offset;
438 nettel_intel_partitions[5].size =
439 nettel_intel_partitions[4].size;
440 } else {
441 /* No BIOS regions when AMD boot */
442 num_intel_partitions -= 2;
444 rc = add_mtd_partitions(intel_mtd, nettel_intel_partitions,
445 num_intel_partitions);
446 #endif
448 if (amd_mtd) {
449 rc = add_mtd_partitions(amd_mtd, nettel_amd_partitions,
450 num_amd_partitions);
453 #ifdef CONFIG_MTD_CFI_INTELEXT
454 register_reboot_notifier(&nettel_notifier_block);
455 #endif
457 return(rc);
460 /****************************************************************************/
462 void __exit nettel_cleanup(void)
464 #ifdef CONFIG_MTD_CFI_INTELEXT
465 unregister_reboot_notifier(&nettel_notifier_block);
466 #endif
467 if (amd_mtd) {
468 del_mtd_partitions(amd_mtd);
469 map_destroy(amd_mtd);
471 if (nettel_amd_map.virt) {
472 iounmap(nettel_amd_map.virt);
473 nettel_amd_map.virt = NULL;
475 #ifdef CONFIG_MTD_CFI_INTELEXT
476 if (intel_mtd) {
477 del_mtd_partitions(intel_mtd);
478 map_destroy(intel_mtd);
480 if (nettel_intel_map.virt) {
481 iounmap(nettel_intel_map.virt);
482 nettel_intel_map.virt = 0;
484 #endif
487 /****************************************************************************/
489 module_init(nettel_init);
490 module_exit(nettel_cleanup);
492 MODULE_LICENSE("GPL");
493 MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
494 MODULE_DESCRIPTION("SnapGear/SecureEdge FLASH support");
496 /****************************************************************************/