Linux-2.6.12-rc2

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / message / i2o / i2o_scsi.c

/*
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * For the avoidance of doubt the "preferred form" of this code is one which
 * is in an open non patent encumbered format. Where cryptographic key signing
 * forms part of the process of creating an executable the information
 * including keys needed to generate an equivalently functional executable
 * are deemed to be part of the source code.
 *
 *  Complications for I2O scsi
 *
 *      o       Each (bus,lun) is a logical device in I2O. We keep a map
 *              table. We spoof failed selection for unmapped units
 *      o       Request sense buffers can come back for free.
 *      o       Scatter gather is a bit dynamic. We have to investigate at
 *              setup time.
 *      o       Some of our resources are dynamically shared. The i2o core
 *              needs a message reservation protocol to avoid swap v net
 *              deadlocking. We need to back off queue requests.
 *
 *      In general the firmware wants to help. Where its help isn't performance
 *      useful we just ignore the aid. Its not worth the code in truth.
 *
 * Fixes/additions:
 *      Steve Ralston:
 *              Scatter gather now works
 *      Markus Lidel <Markus.Lidel@shadowconnect.com>:
 *              Minor fixes for 2.6.
 *
 * To Do:
 *      64bit cleanups
 *      Fix the resource management problems.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/prefetch.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/i2o.h>

#include <asm/dma.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/atomic.h>

#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>

#define OSM_NAME        "scsi-osm"
#define OSM_VERSION     "$Rev$"
#define OSM_DESCRIPTION "I2O SCSI Peripheral OSM"

static struct i2o_driver i2o_scsi_driver;

static int i2o_scsi_max_id = 16;
static int i2o_scsi_max_lun = 8;

struct i2o_scsi_host {
        struct Scsi_Host *scsi_host;    /* pointer to the SCSI host */
        struct i2o_controller *iop;     /* pointer to the I2O controller */
        struct i2o_device *channel[0];  /* channel->i2o_dev mapping table */
};

static struct scsi_host_template i2o_scsi_host_template;

#define I2O_SCSI_CAN_QUEUE      4

/* SCSI OSM class handling definition */
static struct i2o_class_id i2o_scsi_class_id[] = {
        {I2O_CLASS_SCSI_PERIPHERAL},
        {I2O_CLASS_END}
};

static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c)
{
        struct i2o_scsi_host *i2o_shost;
        struct i2o_device *i2o_dev;
        struct Scsi_Host *scsi_host;
        int max_channel = 0;
        u8 type;
        int i;
        size_t size;
        i2o_status_block *sb;

        list_for_each_entry(i2o_dev, &c->devices, list)
            if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER_PORT) {
                if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1))    /* SCSI bus */
                        max_channel++;
        }

        if (!max_channel) {
                osm_warn("no channels found on %s\n", c->name);
                return ERR_PTR(-EFAULT);
        }

        size = max_channel * sizeof(struct i2o_device *)
            + sizeof(struct i2o_scsi_host);

        scsi_host = scsi_host_alloc(&i2o_scsi_host_template, size);
        if (!scsi_host) {
                osm_warn("Could not allocate SCSI host\n");
                return ERR_PTR(-ENOMEM);
        }

        scsi_host->max_channel = max_channel - 1;
        scsi_host->max_id = i2o_scsi_max_id;
        scsi_host->max_lun = i2o_scsi_max_lun;
        scsi_host->this_id = c->unit;

        sb = c->status_block.virt;

        scsi_host->sg_tablesize = (sb->inbound_frame_size -
                                   sizeof(struct i2o_message) / 4 - 6) / 2;

        i2o_shost = (struct i2o_scsi_host *)scsi_host->hostdata;
        i2o_shost->scsi_host = scsi_host;
        i2o_shost->iop = c;

        i = 0;
        list_for_each_entry(i2o_dev, &c->devices, list)
            if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER_PORT) {
                if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1))    /* only SCSI bus */
                        i2o_shost->channel[i++] = i2o_dev;

                if (i >= max_channel)
                        break;
        }

        return i2o_shost;
};

/**
 *      i2o_scsi_get_host - Get an I2O SCSI host
 *      @c: I2O controller to for which to get the SCSI host
 *
 *      If the I2O controller already exists as SCSI host, the SCSI host
 *      is returned, otherwise the I2O controller is added to the SCSI
 *      core.
 *
 *      Returns pointer to the I2O SCSI host on success or NULL on failure.
 */
static struct i2o_scsi_host *i2o_scsi_get_host(struct i2o_controller *c)
{
        return c->driver_data[i2o_scsi_driver.context];
};

/**
 *      i2o_scsi_remove - Remove I2O device from SCSI core
 *      @dev: device which should be removed
 *
 *      Removes the I2O device from the SCSI core again.
 *
 *      Returns 0 on success.
 */
static int i2o_scsi_remove(struct device *dev)
{
        struct i2o_device *i2o_dev = to_i2o_device(dev);
        struct i2o_controller *c = i2o_dev->iop;
        struct i2o_scsi_host *i2o_shost;
        struct scsi_device *scsi_dev;

        i2o_shost = i2o_scsi_get_host(c);

        shost_for_each_device(scsi_dev, i2o_shost->scsi_host)
            if (scsi_dev->hostdata == i2o_dev) {
                scsi_remove_device(scsi_dev);
                scsi_device_put(scsi_dev);
                break;
        }

        return 0;
};

/**
 *      i2o_scsi_probe - verify if dev is a I2O SCSI device and install it
 *      @dev: device to verify if it is a I2O SCSI device
 *
 *      Retrieve channel, id and lun for I2O device. If everthing goes well
 *      register the I2O device as SCSI device on the I2O SCSI controller.
 *
 *      Returns 0 on success or negative error code on failure.
 */
static int i2o_scsi_probe(struct device *dev)
{
        struct i2o_device *i2o_dev = to_i2o_device(dev);
        struct i2o_controller *c = i2o_dev->iop;
        struct i2o_scsi_host *i2o_shost;
        struct Scsi_Host *scsi_host;
        struct i2o_device *parent;
        struct scsi_device *scsi_dev;
        u32 id;
        u64 lun;
        int channel = -1;
        int i;

        i2o_shost = i2o_scsi_get_host(c);
        if (!i2o_shost)
                return -EFAULT;

        scsi_host = i2o_shost->scsi_host;

        if (i2o_parm_field_get(i2o_dev, 0, 3, &id, 4) < 0)
                return -EFAULT;

        if (id >= scsi_host->max_id) {
                osm_warn("SCSI device id (%d) >= max_id of I2O host (%d)", id,
                         scsi_host->max_id);
                return -EFAULT;
        }

        if (i2o_parm_field_get(i2o_dev, 0, 4, &lun, 8) < 0)
                return -EFAULT;
        if (lun >= scsi_host->max_lun) {
                osm_warn("SCSI device id (%d) >= max_lun of I2O host (%d)",
                         (unsigned int)lun, scsi_host->max_lun);
                return -EFAULT;
        }

        parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid);
        if (!parent) {
                osm_warn("can not find parent of device %03x\n",
                         i2o_dev->lct_data.tid);
                return -EFAULT;
        }

        for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++)
                if (i2o_shost->channel[i] == parent)
                        channel = i;

        if (channel == -1) {
                osm_warn("can not find channel of device %03x\n",
                         i2o_dev->lct_data.tid);
                return -EFAULT;
        }

        scsi_dev =
            __scsi_add_device(i2o_shost->scsi_host, channel, id, lun, i2o_dev);

        if (!scsi_dev) {
                osm_warn("can not add SCSI device %03x\n",
                         i2o_dev->lct_data.tid);
                return -EFAULT;
        }

        osm_debug("added new SCSI device %03x (cannel: %d, id: %d, lun: %d)\n",
                  i2o_dev->lct_data.tid, channel, id, (unsigned int)lun);

        return 0;
};

static const char *i2o_scsi_info(struct Scsi_Host *SChost)
{
        struct i2o_scsi_host *hostdata;
        hostdata = (struct i2o_scsi_host *)SChost->hostdata;
        return hostdata->iop->name;
}

/**
 *      i2o_scsi_reply - SCSI OSM message reply handler
 *      @c: controller issuing the reply
 *      @m: message id for flushing
 *      @msg: the message from the controller
 *
 *      Process reply messages (interrupts in normal scsi controller think).
 *      We can get a variety of messages to process. The normal path is
 *      scsi command completions. We must also deal with IOP failures,
 *      the reply to a bus reset and the reply to a LUN query.
 *
 *      Returns 0 on success and if the reply should not be flushed or > 0
 *      on success and if the reply should be flushed. Returns negative error
 *      code on failure and if the reply should be flushed.
 */
static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
                          struct i2o_message *msg)
{
        struct scsi_cmnd *cmd;
        struct device *dev;
        u8 as, ds, st;

        cmd = i2o_cntxt_list_get(c, le32_to_cpu(msg->u.s.tcntxt));

        if (msg->u.head[0] & (1 << 13)) {
                struct i2o_message __iomem *pmsg;       /* preserved message */
                u32 pm;
                int err = DID_ERROR;

                pm = le32_to_cpu(msg->body[3]);

                pmsg = i2o_msg_in_to_virt(c, pm);

                osm_err("IOP fail.\n");
                osm_err("From %d To %d Cmd %d.\n",
                        (msg->u.head[1] >> 12) & 0xFFF,
                        msg->u.head[1] & 0xFFF, msg->u.head[1] >> 24);
                osm_err("Failure Code %d.\n", msg->body[0] >> 24);
                if (msg->body[0] & (1 << 16))
                        osm_err("Format error.\n");
                if (msg->body[0] & (1 << 17))
                        osm_err("Path error.\n");
                if (msg->body[0] & (1 << 18))
                        osm_err("Path State.\n");
                if (msg->body[0] & (1 << 18))
                {
                        osm_err("Congestion.\n");
                        err = DID_BUS_BUSY;
                }

                osm_debug("Failing message is %p.\n", pmsg);

                cmd = i2o_cntxt_list_get(c, readl(&pmsg->u.s.tcntxt));
                if (!cmd)
                        return 1;

                cmd->result = err << 16;
                cmd->scsi_done(cmd);

                /* Now flush the message by making it a NOP */
                i2o_msg_nop(c, pm);

                return 1;
        }

        /*
         *      Low byte is device status, next is adapter status,
         *      (then one byte reserved), then request status.
         */
        ds = (u8) le32_to_cpu(msg->body[0]);
        as = (u8) (le32_to_cpu(msg->body[0]) >> 8);
        st = (u8) (le32_to_cpu(msg->body[0]) >> 24);

        /*
         *      Is this a control request coming back - eg an abort ?
         */

        if (!cmd) {
                if (st)
                        osm_warn("SCSI abort: %08X", le32_to_cpu(msg->body[0]));
                osm_info("SCSI abort completed.\n");
                return -EFAULT;
        }

        osm_debug("Completed %ld\n", cmd->serial_number);

        if (st) {
                u32 count, error;
                /* An error has occurred */

                switch (st) {
                case 0x06:
                        count = le32_to_cpu(msg->body[1]);
                        if (count < cmd->underflow) {
                                int i;

                                osm_err("SCSI underflow 0x%08X 0x%08X\n", count,
                                        cmd->underflow);
                                osm_debug("Cmd: ");
                                for (i = 0; i < 15; i++)
                                        pr_debug("%02X ", cmd->cmnd[i]);
                                pr_debug(".\n");
                                cmd->result = (DID_ERROR << 16);
                        }
                        break;

                default:
                        error = le32_to_cpu(msg->body[0]);

                        osm_err("SCSI error %08x\n", error);

                        if ((error & 0xff) == 0x02 /*CHECK_CONDITION */ ) {
                                int i;
                                u32 len = sizeof(cmd->sense_buffer);
                                len = (len > 40) ? 40 : len;
                                // Copy over the sense data
                                memcpy(cmd->sense_buffer, (void *)&msg->body[3],
                                       len);
                                for (i = 0; i <= len; i++)
                                        osm_info("%02x\n",
                                                 cmd->sense_buffer[i]);
                                if (cmd->sense_buffer[0] == 0x70
                                    && cmd->sense_buffer[2] == DATA_PROTECT) {
                                        /* This is to handle an array failed */
                                        cmd->result = (DID_TIME_OUT << 16);
                                        printk(KERN_WARNING "%s: SCSI Data "
                                               "Protect-Device (%d,%d,%d) "
                                               "hba_status=0x%x, dev_status="
                                               "0x%x, cmd=0x%x\n", c->name,
                                               (u32) cmd->device->channel,
                                               (u32) cmd->device->id,
                                               (u32) cmd->device->lun,
                                               (error >> 8) & 0xff,
                                               error & 0xff, cmd->cmnd[0]);
                                } else
                                        cmd->result = (DID_ERROR << 16);

                                break;
                        }

                        switch (as) {
                        case 0x0E:
                                /* SCSI Reset */
                                cmd->result = DID_RESET << 16;
                                break;

                        case 0x0F:
                                cmd->result = DID_PARITY << 16;
                                break;

                        default:
                                cmd->result = DID_ERROR << 16;
                                break;
                        }

                        break;
                }

                cmd->scsi_done(cmd);
                return 1;
        }

        cmd->result = DID_OK << 16 | ds;

        cmd->scsi_done(cmd);

        dev = &c->pdev->dev;
        if (cmd->use_sg)
                dma_unmap_sg(dev, (struct scatterlist *)cmd->buffer,
                             cmd->use_sg, cmd->sc_data_direction);
        else if (cmd->request_bufflen)
                dma_unmap_single(dev, (dma_addr_t) ((long)cmd->SCp.ptr),
                                 cmd->request_bufflen, cmd->sc_data_direction);

        return 1;
};

/**
 *      i2o_scsi_notify_controller_add - Retrieve notifications of added
 *                                       controllers
 *      @c: the controller which was added
 *
 *      If a I2O controller is added, we catch the notification to add a
 *      corresponding Scsi_Host.
 */
static void i2o_scsi_notify_controller_add(struct i2o_controller *c)
{
        struct i2o_scsi_host *i2o_shost;
        int rc;

        i2o_shost = i2o_scsi_host_alloc(c);
        if (IS_ERR(i2o_shost)) {
                osm_err("Could not initialize SCSI host\n");
                return;
        }

        rc = scsi_add_host(i2o_shost->scsi_host, &c->device);
        if (rc) {
                osm_err("Could not add SCSI host\n");
                scsi_host_put(i2o_shost->scsi_host);
                return;
        }

        c->driver_data[i2o_scsi_driver.context] = i2o_shost;

        osm_debug("new I2O SCSI host added\n");
};

/**
 *      i2o_scsi_notify_controller_remove - Retrieve notifications of removed
 *                                          controllers
 *      @c: the controller which was removed
 *
 *      If a I2O controller is removed, we catch the notification to remove the
 *      corresponding Scsi_Host.
 */
static void i2o_scsi_notify_controller_remove(struct i2o_controller *c)
{
        struct i2o_scsi_host *i2o_shost;
        i2o_shost = i2o_scsi_get_host(c);
        if (!i2o_shost)
                return;

        c->driver_data[i2o_scsi_driver.context] = NULL;

        scsi_remove_host(i2o_shost->scsi_host);
        scsi_host_put(i2o_shost->scsi_host);
        pr_info("I2O SCSI host removed\n");
};

/* SCSI OSM driver struct */
static struct i2o_driver i2o_scsi_driver = {
        .name = OSM_NAME,
        .reply = i2o_scsi_reply,
        .classes = i2o_scsi_class_id,
        .notify_controller_add = i2o_scsi_notify_controller_add,
        .notify_controller_remove = i2o_scsi_notify_controller_remove,
        .driver = {
                   .probe = i2o_scsi_probe,
                   .remove = i2o_scsi_remove,
                   },
};

/**
 *      i2o_scsi_queuecommand - queue a SCSI command
 *      @SCpnt: scsi command pointer
 *      @done: callback for completion
 *
 *      Issue a scsi command asynchronously. Return 0 on success or 1 if
 *      we hit an error (normally message queue congestion). The only
 *      minor complication here is that I2O deals with the device addressing
 *      so we have to map the bus/dev/lun back to an I2O handle as well
 *      as faking absent devices ourself.
 *
 *      Locks: takes the controller lock on error path only
 */

static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
                                 void (*done) (struct scsi_cmnd *))
{
        struct i2o_controller *c;
        struct Scsi_Host *host;
        struct i2o_device *i2o_dev;
        struct device *dev;
        int tid;
        struct i2o_message __iomem *msg;
        u32 m;
        u32 scsi_flags, sg_flags;
        u32 __iomem *mptr;
        u32 __iomem *lenptr;
        u32 len, reqlen;
        int i;

        /*
         *      Do the incoming paperwork
         */

        i2o_dev = SCpnt->device->hostdata;
        host = SCpnt->device->host;
        c = i2o_dev->iop;
        dev = &c->pdev->dev;

        SCpnt->scsi_done = done;

        if (unlikely(!i2o_dev)) {
                osm_warn("no I2O device in request\n");
                SCpnt->result = DID_NO_CONNECT << 16;
                done(SCpnt);
                return 0;
        }

        tid = i2o_dev->lct_data.tid;

        osm_debug("qcmd: Tid = %03x\n", tid);
        osm_debug("Real scsi messages.\n");

        /*
         *      Obtain an I2O message. If there are none free then
         *      throw it back to the scsi layer
         */

        m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
        if (m == I2O_QUEUE_EMPTY)
                return SCSI_MLQUEUE_HOST_BUSY;

        /*
         *      Put together a scsi execscb message
         */

        len = SCpnt->request_bufflen;

        switch (SCpnt->sc_data_direction) {
        case PCI_DMA_NONE:
                scsi_flags = 0x00000000;        // DATA NO XFER
                sg_flags = 0x00000000;
                break;

        case PCI_DMA_TODEVICE:
                scsi_flags = 0x80000000;        // DATA OUT (iop-->dev)
                sg_flags = 0x14000000;
                break;

        case PCI_DMA_FROMDEVICE:
                scsi_flags = 0x40000000;        // DATA IN  (iop<--dev)
                sg_flags = 0x10000000;
                break;

        default:
                /* Unknown - kill the command */
                SCpnt->result = DID_NO_CONNECT << 16;
                done(SCpnt);
                return 0;
        }

        writel(I2O_CMD_SCSI_EXEC << 24 | HOST_TID << 12 | tid, &msg->u.head[1]);
        writel(i2o_scsi_driver.context, &msg->u.s.icntxt);

        /* We want the SCSI control block back */
        writel(i2o_cntxt_list_add(c, SCpnt), &msg->u.s.tcntxt);

        /* LSI_920_PCI_QUIRK
         *
         *      Intermittant observations of msg frame word data corruption
         *      observed on msg[4] after:
         *        WRITE, READ-MODIFY-WRITE
         *      operations.  19990606 -sralston
         *
         *      (Hence we build this word via tag. Its good practice anyway
         *       we don't want fetches over PCI needlessly)
         */

        /* Attach tags to the devices */
        /*
           if(SCpnt->device->tagged_supported) {
           if(SCpnt->tag == HEAD_OF_QUEUE_TAG)
           scsi_flags |= 0x01000000;
           else if(SCpnt->tag == ORDERED_QUEUE_TAG)
           scsi_flags |= 0x01800000;
           }
         */

        /* Direction, disconnect ok, tag, CDBLen */
        writel(scsi_flags | 0x20200000 | SCpnt->cmd_len, &msg->body[0]);

        mptr = &msg->body[1];

        /* Write SCSI command into the message - always 16 byte block */
        memcpy_toio(mptr, SCpnt->cmnd, 16);
        mptr += 4;
        lenptr = mptr++;        /* Remember me - fill in when we know */

        reqlen = 12;            // SINGLE SGE

        /* Now fill in the SGList and command */
        if (SCpnt->use_sg) {
                struct scatterlist *sg;
                int sg_count;

                sg = SCpnt->request_buffer;
                len = 0;

                sg_count = dma_map_sg(dev, sg, SCpnt->use_sg,
                                      SCpnt->sc_data_direction);

                if (unlikely(sg_count <= 0))
                        return -ENOMEM;

                for (i = SCpnt->use_sg; i > 0; i--) {
                        if (i == 1)
                                sg_flags |= 0xC0000000;
                        writel(sg_flags | sg_dma_len(sg), mptr++);
                        writel(sg_dma_address(sg), mptr++);
                        len += sg_dma_len(sg);
                        sg++;
                }

                reqlen = mptr - &msg->u.head[0];
                writel(len, lenptr);
        } else {
                len = SCpnt->request_bufflen;

                writel(len, lenptr);

                if (len > 0) {
                        dma_addr_t dma_addr;

                        dma_addr = dma_map_single(dev, SCpnt->request_buffer,
                                                  SCpnt->request_bufflen,
                                                  SCpnt->sc_data_direction);
                        if (!dma_addr)
                                return -ENOMEM;

                        SCpnt->SCp.ptr = (void *)(unsigned long)dma_addr;
                        sg_flags |= 0xC0000000;
                        writel(sg_flags | SCpnt->request_bufflen, mptr++);
                        writel(dma_addr, mptr++);
                } else
                        reqlen = 9;
        }

        /* Stick the headers on */
        writel(reqlen << 16 | SGL_OFFSET_10, &msg->u.head[0]);

        /* Queue the message */
        i2o_msg_post(c, m);

        osm_debug("Issued %ld\n", SCpnt->serial_number);

        return 0;
};

/**
 *      i2o_scsi_abort - abort a running command
 *      @SCpnt: command to abort
 *
 *      Ask the I2O controller to abort a command. This is an asynchrnous
 *      process and our callback handler will see the command complete with an
 *      aborted message if it succeeds.
 *
 *      Returns 0 if the command is successfully aborted or negative error code
 *      on failure.
 */
static int i2o_scsi_abort(struct scsi_cmnd *SCpnt)
{
        struct i2o_device *i2o_dev;
        struct i2o_controller *c;
        struct i2o_message __iomem *msg;
        u32 m;
        int tid;
        int status = FAILED;

        osm_warn("Aborting command block.\n");

        i2o_dev = SCpnt->device->hostdata;
        c = i2o_dev->iop;
        tid = i2o_dev->lct_data.tid;

        m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
        if (m == I2O_QUEUE_EMPTY)
                return SCSI_MLQUEUE_HOST_BUSY;

        writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
        writel(I2O_CMD_SCSI_ABORT << 24 | HOST_TID << 12 | tid,
               &msg->u.head[1]);
        writel(i2o_cntxt_list_get_ptr(c, SCpnt), &msg->body[0]);

        if (i2o_msg_post_wait(c, m, I2O_TIMEOUT_SCSI_SCB_ABORT))
                status = SUCCESS;

        return status;
}

/**
 *      i2o_scsi_bios_param     -       Invent disk geometry
 *      @sdev: scsi device
 *      @dev: block layer device
 *      @capacity: size in sectors
 *      @ip: geometry array
 *
 *      This is anyones guess quite frankly. We use the same rules everyone
 *      else appears to and hope. It seems to work.
 */

static int i2o_scsi_bios_param(struct scsi_device *sdev,
                               struct block_device *dev, sector_t capacity,
                               int *ip)
{
        int size;

        size = capacity;
        ip[0] = 64;             /* heads                        */
        ip[1] = 32;             /* sectors                      */
        if ((ip[2] = size >> 11) > 1024) {      /* cylinders, test for big disk */
                ip[0] = 255;    /* heads                        */
                ip[1] = 63;     /* sectors                      */
                ip[2] = size / (255 * 63);      /* cylinders                    */
        }
        return 0;
}

static struct scsi_host_template i2o_scsi_host_template = {
        .proc_name = OSM_NAME,
        .name = OSM_DESCRIPTION,
        .info = i2o_scsi_info,
        .queuecommand = i2o_scsi_queuecommand,
        .eh_abort_handler = i2o_scsi_abort,
        .bios_param = i2o_scsi_bios_param,
        .can_queue = I2O_SCSI_CAN_QUEUE,
        .sg_tablesize = 8,
        .cmd_per_lun = 6,
        .use_clustering = ENABLE_CLUSTERING,
};

/**
 *      i2o_scsi_init - SCSI OSM initialization function
 *
 *      Register SCSI OSM into I2O core.
 *
 *      Returns 0 on success or negative error code on failure.
 */
static int __init i2o_scsi_init(void)
{
        int rc;

        printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");

        /* Register SCSI OSM into I2O core */
        rc = i2o_driver_register(&i2o_scsi_driver);
        if (rc) {
                osm_err("Could not register SCSI driver\n");
                return rc;
        }

        return 0;
};

/**
 *      i2o_scsi_exit - SCSI OSM exit function
 *
 *      Unregisters SCSI OSM from I2O core.
 */
static void __exit i2o_scsi_exit(void)
{
        /* Unregister I2O SCSI OSM from I2O core */
        i2o_driver_unregister(&i2o_scsi_driver);
};

MODULE_AUTHOR("Red Hat Software");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(OSM_DESCRIPTION);
MODULE_VERSION(OSM_VERSION);

module_init(i2o_scsi_init);
module_exit(i2o_scsi_exit);