?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux-2.6.12-rc2
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / message / fusion / mptbase.c
blob942cc1c2a186cf51a232c59ca46cd60ba93b2e37
1 /*
2 * linux/drivers/message/fusion/mptbase.c
3 * High performance SCSI + LAN / Fibre Channel device drivers.
4 * This is the Fusion MPT base driver which supports multiple
5 * (SCSI + LAN) specialized protocol drivers.
6 * For use with PCI chip/adapter(s):
7 * LSIFC9xx/LSI409xx Fibre Channel
8 * running LSI Logic Fusion MPT (Message Passing Technology) firmware.
9 *
10 * Credits:
11 * There are lots of people not mentioned below that deserve credit
12 * and thanks but won't get it here - sorry in advance that you
13 * got overlooked.
14 *
15 * This driver would not exist if not for Alan Cox's development
16 * of the linux i2o driver.
17 *
18 * A special thanks to Noah Romer (LSI Logic) for tons of work
19 * and tough debugging on the LAN driver, especially early on;-)
20 * And to Roger Hickerson (LSI Logic) for tirelessly supporting
21 * this driver project.
22 *
23 * A special thanks to Pamela Delaney (LSI Logic) for tons of work
24 * and countless enhancements while adding support for the 1030
25 * chip family. Pam has been instrumental in the development of
26 * of the 2.xx.xx series fusion drivers, and her contributions are
27 * far too numerous to hope to list in one place.
28 *
29 * All manner of help from Stephen Shirron (LSI Logic):
30 * low-level FC analysis, debug + various fixes in FCxx firmware,
31 * initial port to alpha platform, various driver code optimizations,
32 * being a faithful sounding board on all sorts of issues & ideas,
33 * etc.
34 *
35 * A huge debt of gratitude is owed to David S. Miller (DaveM)
36 * for fixing much of the stupid and broken stuff in the early
37 * driver while porting to sparc64 platform. THANK YOU!
38 *
39 * Special thanks goes to the I2O LAN driver people at the
40 * University of Helsinki, who, unbeknownst to them, provided
41 * the inspiration and initial structure for this driver.
42 *
43 * A really huge debt of gratitude is owed to Eddie C. Dost
44 * for gobs of hard work fixing and optimizing LAN code.
45 * THANK YOU!
46 *
47 * Copyright (c) 1999-2004 LSI Logic Corporation
48 * Originally By: Steven J. Ralston
49 * (mailto:sjralston1@netscape.net)
50 * (mailto:mpt_linux_developer@lsil.com)
51 *
52 * $Id: mptbase.c,v 1.126 2002/12/16 15:28:45 pdelaney Exp $
53 */
54 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
55 /*
56 This program is free software; you can redistribute it and/or modify
57 it under the terms of the GNU General Public License as published by
58 the Free Software Foundation; version 2 of the License.
59
60 This program is distributed in the hope that it will be useful,
61 but WITHOUT ANY WARRANTY; without even the implied warranty of
62 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
63 GNU General Public License for more details.
64
65 NO WARRANTY
66 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
67 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
68 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
69 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
70 solely responsible for determining the appropriateness of using and
71 distributing the Program and assumes all risks associated with its
72 exercise of rights under this Agreement, including but not limited to
73 the risks and costs of program errors, damage to or loss of data,
74 programs or equipment, and unavailability or interruption of operations.
75
76 DISCLAIMER OF LIABILITY
77 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
78 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
79 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
80 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
81 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
82 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
83 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
84
85 You should have received a copy of the GNU General Public License
86 along with this program; if not, write to the Free Software
87 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
88 */
89 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
90
91 #include <linux/config.h>
92 #include <linux/version.h>
93 #include <linux/kernel.h>
94 #include <linux/module.h>
95 #include <linux/errno.h>
96 #include <linux/init.h>
97 #include <linux/slab.h>
98 #include <linux/types.h>
99 #include <linux/pci.h>
100 #include <linux/kdev_t.h>
101 #include <linux/blkdev.h>
102 #include <linux/delay.h>
103 #include <linux/interrupt.h> /* needed for in_interrupt() proto */
104 #include <asm/io.h>
105 #ifdef CONFIG_MTRR
106 #include <asm/mtrr.h>
107 #endif
108 #ifdef __sparc__
109 #include <asm/irq.h> /* needed for __irq_itoa() proto */
110 #endif
111
112 #include "mptbase.h"
113
114 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
115 #define my_NAME "Fusion MPT base driver"
116 #define my_VERSION MPT_LINUX_VERSION_COMMON
117 #define MYNAM "mptbase"
118
119 MODULE_AUTHOR(MODULEAUTHOR);
120 MODULE_DESCRIPTION(my_NAME);
121 MODULE_LICENSE("GPL");
122
123 /*
124 * cmd line parameters
125 */
126 #ifdef MFCNT
127 static int mfcounter = 0;
128 #define PRINT_MF_COUNT 20000
129 #endif
130
131 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
132 /*
133 * Public data...
134 */
135 int mpt_lan_index = -1;
136 int mpt_stm_index = -1;
137
138 struct proc_dir_entry *mpt_proc_root_dir;
139
140 #define WHOINIT_UNKNOWN 0xAA
141
142 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
143 /*
144 * Private data...
145 */
146 /* Adapter link list */
147 LIST_HEAD(ioc_list);
148 /* Callback lookup table */
149 static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
150 /* Protocol driver class lookup table */
151 static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
152 /* Event handler lookup table */
153 static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
154 /* Reset handler lookup table */
155 static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
156 static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
157
158 static int mpt_base_index = -1;
159 static int last_drv_idx = -1;
160
161 static DECLARE_WAIT_QUEUE_HEAD(mpt_waitq);
162
163 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
164 /*
165 * Forward protos...
166 */
167 static irqreturn_t mpt_interrupt(int irq, void *bus_id, struct pt_regs *r);
168 static int mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
169 static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
170 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
171 int sleepFlag);
172 static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
173 static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
174 static void mpt_adapter_disable(MPT_ADAPTER *ioc);
175 static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
176
177 static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
178 static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
179 //static u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
180 static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
181 static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
182 static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
183 static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
184 static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
185 static int mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag);
186 static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
187 static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
188 static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
189 static int PrimeIocFifos(MPT_ADAPTER *ioc);
190 static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
191 static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
192 static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
193 static int GetLanConfigPages(MPT_ADAPTER *ioc);
194 static int GetFcPortPage0(MPT_ADAPTER *ioc, int portnum);
195 static int GetIoUnitPage2(MPT_ADAPTER *ioc);
196 static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
197 static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
198 static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
199 static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
200 static void mpt_timer_expired(unsigned long data);
201 static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch);
202 static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
203
204 #ifdef CONFIG_PROC_FS
205 static int procmpt_summary_read(char *buf, char **start, off_t offset,
206 int request, int *eof, void *data);
207 static int procmpt_version_read(char *buf, char **start, off_t offset,
208 int request, int *eof, void *data);
209 static int procmpt_iocinfo_read(char *buf, char **start, off_t offset,
210 int request, int *eof, void *data);
211 #endif
212 static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
213
214 //int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
215 static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
216 static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
217 static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
218 static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info);
219
220 /* module entry point */
221 static int __devinit mptbase_probe (struct pci_dev *, const struct pci_device_id *);
222 static void __devexit mptbase_remove(struct pci_dev *);
223 static void mptbase_shutdown(struct device * );
224 static int __init fusion_init (void);
225 static void __exit fusion_exit (void);
226
227 /****************************************************************************
228 * Supported hardware
229 */
230
231 static struct pci_device_id mptbase_pci_table[] = {
232 { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC909,
233 PCI_ANY_ID, PCI_ANY_ID },
234 { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929,
235 PCI_ANY_ID, PCI_ANY_ID },
236 { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919,
237 PCI_ANY_ID, PCI_ANY_ID },
238 { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929X,
239 PCI_ANY_ID, PCI_ANY_ID },
240 { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919X,
241 PCI_ANY_ID, PCI_ANY_ID },
242 { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030,
243 PCI_ANY_ID, PCI_ANY_ID },
244 { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_1030_53C1035,
245 PCI_ANY_ID, PCI_ANY_ID },
246 {0} /* Terminating entry */
247 };
248 MODULE_DEVICE_TABLE(pci, mptbase_pci_table);
249
250 #define CHIPREG_READ32(addr) readl_relaxed(addr)
251 #define CHIPREG_READ32_dmasync(addr) readl(addr)
252 #define CHIPREG_WRITE32(addr,val) writel(val, addr)
253 #define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
254 #define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
255
256 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
257 /*
258 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
259 * @irq: irq number (not used)
260 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
261 * @r: pt_regs pointer (not used)
262 *
263 * This routine is registered via the request_irq() kernel API call,
264 * and handles all interrupts generated from a specific MPT adapter
265 * (also referred to as a IO Controller or IOC).
266 * This routine must clear the interrupt from the adapter and does
267 * so by reading the reply FIFO. Multiple replies may be processed
268 * per single call to this routine; up to MPT_MAX_REPLIES_PER_ISR
269 * which is currently set to 32 in mptbase.h.
270 *
271 * This routine handles register-level access of the adapter but
272 * dispatches (calls) a protocol-specific callback routine to handle
273 * the protocol-specific details of the MPT request completion.
274 */
275 static irqreturn_t
276 mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
277 {
278 MPT_ADAPTER *ioc;
279 MPT_FRAME_HDR *mf;
280 MPT_FRAME_HDR *mr;
281 u32 pa;
282 int req_idx;
283 int cb_idx;
284 int type;
285 int freeme;
286
287 ioc = (MPT_ADAPTER *)bus_id;
288
289 /*
290 * Drain the reply FIFO!
291 *
292 * NOTES: I've seen up to 10 replies processed in this loop, so far...
293 * Update: I've seen up to 9182 replies processed in this loop! ??
294 * Update: Limit ourselves to processing max of N replies
295 * (bottom of loop).
296 */
297 while (1) {
298
299 if ((pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo)) == 0xFFFFFFFF)
300 return IRQ_HANDLED;
301
302 cb_idx = 0;
303 freeme = 0;
304
305 /*
306 * Check for non-TURBO reply!
307 */
308 if (pa & MPI_ADDRESS_REPLY_A_BIT) {
309 u32 reply_dma_low;
310 u16 ioc_stat;
311
312 /* non-TURBO reply! Hmmm, something may be up...
313 * Newest turbo reply mechanism; get address
314 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
315 */
316
317 /* Map DMA address of reply header to cpu address.
318 * pa is 32 bits - but the dma address may be 32 or 64 bits
319 * get offset based only only the low addresses
320 */
321 reply_dma_low = (pa = (pa << 1));
322 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
323 (reply_dma_low - ioc->reply_frames_low_dma));
324
325 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
326 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
327 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
328
329 dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x\n",
330 ioc->name, mr, req_idx));
331 DBG_DUMP_REPLY_FRAME(mr)
332
333 /* NEW! 20010301 -sralston
334 * Check/log IOC log info
335 */
336 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
337 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
338 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
339 if (ioc->bus_type == FC)
340 mpt_fc_log_info(ioc, log_info);
341 else if (ioc->bus_type == SCSI)
342 mpt_sp_log_info(ioc, log_info);
343 }
344 if (ioc_stat & MPI_IOCSTATUS_MASK) {
345 if (ioc->bus_type == SCSI)
346 mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
347 }
348 } else {
349 /*
350 * Process turbo (context) reply...
351 */
352 dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n", ioc->name, pa));
353 type = (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT);
354 if (type == MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET) {
355 cb_idx = mpt_stm_index;
356 mf = NULL;
357 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
358 } else if (type == MPI_CONTEXT_REPLY_TYPE_LAN) {
359 cb_idx = mpt_lan_index;
360 /*
361 * BUG FIX! 20001218 -sralston
362 * Blind set of mf to NULL here was fatal
363 * after lan_reply says "freeme"
364 * Fix sort of combined with an optimization here;
365 * added explicit check for case where lan_reply
366 * was just returning 1 and doing nothing else.
367 * For this case skip the callback, but set up
368 * proper mf value first here:-)
369 */
370 if ((pa & 0x58000000) == 0x58000000) {
371 req_idx = pa & 0x0000FFFF;
372 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
373 freeme = 1;
374 /*
375 * IMPORTANT! Invalidate the callback!
376 */
377 cb_idx = 0;
378 } else {
379 mf = NULL;
380 }
381 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
382 } else {
383 req_idx = pa & 0x0000FFFF;
384 cb_idx = (pa & 0x00FF0000) >> 16;
385 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
386 mr = NULL;
387 }
388 pa = 0; /* No reply flush! */
389 }
390
391 #ifdef MPT_DEBUG_IRQ
392 if (ioc->bus_type == SCSI) {
393 /* Verify mf, mr are reasonable.
394 */
395 if ((mf) && ((mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))
396 || (mf < ioc->req_frames)) ) {
397 printk(MYIOC_s_WARN_FMT
398 "mpt_interrupt: Invalid mf (%p) req_idx (%d)!\n", ioc->name, (void *)mf, req_idx);
399 cb_idx = 0;
400 pa = 0;
401 freeme = 0;
402 }
403 if ((pa) && (mr) && ((mr >= MPT_INDEX_2_RFPTR(ioc, ioc->req_depth))
404 || (mr < ioc->reply_frames)) ) {
405 printk(MYIOC_s_WARN_FMT
406 "mpt_interrupt: Invalid rf (%p)!\n", ioc->name, (void *)mr);
407 cb_idx = 0;
408 pa = 0;
409 freeme = 0;
410 }
411 if (cb_idx > (MPT_MAX_PROTOCOL_DRIVERS-1)) {
412 printk(MYIOC_s_WARN_FMT
413 "mpt_interrupt: Invalid cb_idx (%d)!\n", ioc->name, cb_idx);
414 cb_idx = 0;
415 pa = 0;
416 freeme = 0;
417 }
418 }
419 #endif
420
421 /* Check for (valid) IO callback! */
422 if (cb_idx) {
423 /* Do the callback! */
424 freeme = (*(MptCallbacks[cb_idx]))(ioc, mf, mr);
425 }
426
427 if (pa) {
428 /* Flush (non-TURBO) reply with a WRITE! */
429 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
430 }
431
432 if (freeme) {
433 unsigned long flags;
434
435 /* Put Request back on FreeQ! */
436 spin_lock_irqsave(&ioc->FreeQlock, flags);
437 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
438 #ifdef MFCNT
439 ioc->mfcnt--;
440 #endif
441 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
442 }
443
444 mb();
445 } /* drain reply FIFO */
446
447 return IRQ_HANDLED;
448 }
449
450 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
451 /*
452 * mpt_base_reply - MPT base driver's callback routine; all base driver
453 * "internal" request/reply processing is routed here.
454 * Currently used for EventNotification and EventAck handling.
455 * @ioc: Pointer to MPT_ADAPTER structure
456 * @mf: Pointer to original MPT request frame
457 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
458 *
459 * Returns 1 indicating original alloc'd request frame ptr
460 * should be freed, or 0 if it shouldn't.
461 */
462 static int
463 mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
464 {
465 int freereq = 1;
466 u8 func;
467
468 dprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n", ioc->name));
469
470 if ((mf == NULL) ||
471 (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
472 printk(MYIOC_s_ERR_FMT "NULL or BAD request frame ptr! (=%p)\n",
473 ioc->name, (void *)mf);
474 return 1;
475 }
476
477 if (reply == NULL) {
478 dprintk((MYIOC_s_ERR_FMT "Unexpected NULL Event (turbo?) reply!\n",
479 ioc->name));
480 return 1;
481 }
482
483 if (!(reply->u.hdr.MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) {
484 dmfprintk((KERN_INFO MYNAM ": Original request frame (@%p) header\n", mf));
485 DBG_DUMP_REQUEST_FRAME_HDR(mf)
486 }
487
488 func = reply->u.hdr.Function;
489 dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
490 ioc->name, func));
491
492 if (func == MPI_FUNCTION_EVENT_NOTIFICATION) {
493 EventNotificationReply_t *pEvReply = (EventNotificationReply_t *) reply;
494 int evHandlers = 0;
495 int results;
496
497 results = ProcessEventNotification(ioc, pEvReply, &evHandlers);
498 if (results != evHandlers) {
499 /* CHECKME! Any special handling needed here? */
500 devtprintk((MYIOC_s_WARN_FMT "Called %d event handlers, sum results = %d\n",
501 ioc->name, evHandlers, results));
502 }
503
504 /*
505 * Hmmm... It seems that EventNotificationReply is an exception
506 * to the rule of one reply per request.
507 */
508 if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
509 freereq = 0;
510
511 #ifdef CONFIG_PROC_FS
512 // LogEvent(ioc, pEvReply);
513 #endif
514
515 } else if (func == MPI_FUNCTION_EVENT_ACK) {
516 dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, EventAck reply received\n",
517 ioc->name));
518 } else if (func == MPI_FUNCTION_CONFIG ||
519 func == MPI_FUNCTION_TOOLBOX) {
520 CONFIGPARMS *pCfg;
521 unsigned long flags;
522
523 dcprintk((MYIOC_s_INFO_FMT "config_complete (mf=%p,mr=%p)\n",
524 ioc->name, mf, reply));
525
526 pCfg = * ((CONFIGPARMS **)((u8 *) mf + ioc->req_sz - sizeof(void *)));
527
528 if (pCfg) {
529 /* disable timer and remove from linked list */
530 del_timer(&pCfg->timer);
531
532 spin_lock_irqsave(&ioc->FreeQlock, flags);
533 list_del(&pCfg->linkage);
534 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
535
536 /*
537 * If IOC Status is SUCCESS, save the header
538 * and set the status code to GOOD.
539 */
540 pCfg->status = MPT_CONFIG_ERROR;
541 if (reply) {
542 ConfigReply_t *pReply = (ConfigReply_t *)reply;
543 u16 status;
544
545 status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
546 dcprintk((KERN_NOTICE " IOCStatus=%04xh, IOCLogInfo=%08xh\n",
547 status, le32_to_cpu(pReply->IOCLogInfo)));
548
549 pCfg->status = status;
550 if (status == MPI_IOCSTATUS_SUCCESS) {
551 pCfg->hdr->PageVersion = pReply->Header.PageVersion;
552 pCfg->hdr->PageLength = pReply->Header.PageLength;
553 pCfg->hdr->PageNumber = pReply->Header.PageNumber;
554 pCfg->hdr->PageType = pReply->Header.PageType;
555 }
556 }
557
558 /*
559 * Wake up the original calling thread
560 */
561 pCfg->wait_done = 1;
562 wake_up(&mpt_waitq);
563 }
564 } else {
565 printk(MYIOC_s_ERR_FMT "Unexpected msg function (=%02Xh) reply received!\n",
566 ioc->name, func);
567 }
568
569 /*
570 * Conditionally tell caller to free the original
571 * EventNotification/EventAck/unexpected request frame!
572 */
573 return freereq;
574 }
575
576 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
577 /**
578 * mpt_register - Register protocol-specific main callback handler.
579 * @cbfunc: callback function pointer
580 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
581 *
582 * This routine is called by a protocol-specific driver (SCSI host,
583 * LAN, SCSI target) to register it's reply callback routine. Each
584 * protocol-specific driver must do this before it will be able to
585 * use any IOC resources, such as obtaining request frames.
586 *
587 * NOTES: The SCSI protocol driver currently calls this routine thrice
588 * in order to register separate callbacks; one for "normal" SCSI IO;
589 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
590 *
591 * Returns a positive integer valued "handle" in the
592 * range (and S.O.D. order) {N,...,7,6,5,...,1} if successful.
593 * Any non-positive return value (including zero!) should be considered
594 * an error by the caller.
595 */
596 int
597 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass)
598 {
599 int i;
600
601 last_drv_idx = -1;
602
603 /*
604 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
605 * (slot/handle 0 is reserved!)
606 */
607 for (i = MPT_MAX_PROTOCOL_DRIVERS-1; i; i--) {
608 if (MptCallbacks[i] == NULL) {
609 MptCallbacks[i] = cbfunc;
610 MptDriverClass[i] = dclass;
611 MptEvHandlers[i] = NULL;
612 last_drv_idx = i;
613 break;
614 }
615 }
616
617 return last_drv_idx;
618 }
619
620 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
621 /**
622 * mpt_deregister - Deregister a protocol drivers resources.
623 * @cb_idx: previously registered callback handle
624 *
625 * Each protocol-specific driver should call this routine when it's
626 * module is unloaded.
627 */
628 void
629 mpt_deregister(int cb_idx)
630 {
631 if ((cb_idx >= 0) && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
632 MptCallbacks[cb_idx] = NULL;
633 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
634 MptEvHandlers[cb_idx] = NULL;
635
636 last_drv_idx++;
637 }
638 }
639
640 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
641 /**
642 * mpt_event_register - Register protocol-specific event callback
643 * handler.
644 * @cb_idx: previously registered (via mpt_register) callback handle
645 * @ev_cbfunc: callback function
646 *
647 * This routine can be called by one or more protocol-specific drivers
648 * if/when they choose to be notified of MPT events.
649 *
650 * Returns 0 for success.
651 */
652 int
653 mpt_event_register(int cb_idx, MPT_EVHANDLER ev_cbfunc)
654 {
655 if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
656 return -1;
657
658 MptEvHandlers[cb_idx] = ev_cbfunc;
659 return 0;
660 }
661
662 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
663 /**
664 * mpt_event_deregister - Deregister protocol-specific event callback
665 * handler.
666 * @cb_idx: previously registered callback handle
667 *
668 * Each protocol-specific driver should call this routine
669 * when it does not (or can no longer) handle events,
670 * or when it's module is unloaded.
671 */
672 void
673 mpt_event_deregister(int cb_idx)
674 {
675 if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
676 return;
677
678 MptEvHandlers[cb_idx] = NULL;
679 }
680
681 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
682 /**
683 * mpt_reset_register - Register protocol-specific IOC reset handler.
684 * @cb_idx: previously registered (via mpt_register) callback handle
685 * @reset_func: reset function
686 *
687 * This routine can be called by one or more protocol-specific drivers
688 * if/when they choose to be notified of IOC resets.
689 *
690 * Returns 0 for success.
691 */
692 int
693 mpt_reset_register(int cb_idx, MPT_RESETHANDLER reset_func)
694 {
695 if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
696 return -1;
697
698 MptResetHandlers[cb_idx] = reset_func;
699 return 0;
700 }
701
702 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
703 /**
704 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
705 * @cb_idx: previously registered callback handle
706 *
707 * Each protocol-specific driver should call this routine
708 * when it does not (or can no longer) handle IOC reset handling,
709 * or when it's module is unloaded.
710 */
711 void
712 mpt_reset_deregister(int cb_idx)
713 {
714 if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
715 return;
716
717 MptResetHandlers[cb_idx] = NULL;
718 }
719
720 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
721 /**
722 * mpt_device_driver_register - Register device driver hooks
723 */
724 int
725 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx)
726 {
727 MPT_ADAPTER *ioc;
728 int error=0;
729
730 if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) {
731 error= -EINVAL;
732 return error;
733 }
734
735 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
736
737 /* call per pci device probe entry point */
738 list_for_each_entry(ioc, &ioc_list, list) {
739 if(dd_cbfunc->probe) {
740 error = dd_cbfunc->probe(ioc->pcidev,
741 ioc->pcidev->driver->id_table);
742 if(error != 0)
743 return error;
744 }
745 }
746
747 return error;
748 }
749
750 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
751 /**
752 * mpt_device_driver_deregister - DeRegister device driver hooks
753 */
754 void
755 mpt_device_driver_deregister(int cb_idx)
756 {
757 struct mpt_pci_driver *dd_cbfunc;
758 MPT_ADAPTER *ioc;
759
760 if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
761 return;
762
763 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
764
765 list_for_each_entry(ioc, &ioc_list, list) {
766 if (dd_cbfunc->remove)
767 dd_cbfunc->remove(ioc->pcidev);
768 }
769
770 MptDeviceDriverHandlers[cb_idx] = NULL;
771 }
772
773
774 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
775 /**
776 * mpt_get_msg_frame - Obtain a MPT request frame from the pool (of 1024)
777 * allocated per MPT adapter.
778 * @handle: Handle of registered MPT protocol driver
779 * @ioc: Pointer to MPT adapter structure
780 *
781 * Returns pointer to a MPT request frame or %NULL if none are available
782 * or IOC is not active.
783 */
784 MPT_FRAME_HDR*
785 mpt_get_msg_frame(int handle, MPT_ADAPTER *ioc)
786 {
787 MPT_FRAME_HDR *mf;
788 unsigned long flags;
789 u16 req_idx; /* Request index */
790
791 /* validate handle and ioc identifier */
792
793 #ifdef MFCNT
794 if (!ioc->active)
795 printk(KERN_WARNING "IOC Not Active! mpt_get_msg_frame returning NULL!\n");
796 #endif
797
798 /* If interrupts are not attached, do not return a request frame */
799 if (!ioc->active)
800 return NULL;
801
802 spin_lock_irqsave(&ioc->FreeQlock, flags);
803 if (!list_empty(&ioc->FreeQ)) {
804 int req_offset;
805
806 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
807 u.frame.linkage.list);
808 list_del(&mf->u.frame.linkage.list);
809 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; /* byte */
810 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
811 /* u16! */
812 req_idx = cpu_to_le16(req_offset / ioc->req_sz);
813 mf->u.frame.hwhdr.msgctxu.fld.req_idx = req_idx;
814 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
815 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame; /* Default, will be changed if necessary in SG generation */
816 #ifdef MFCNT
817 ioc->mfcnt++;
818 #endif
819 }
820 else
821 mf = NULL;
822 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
823
824 #ifdef MFCNT
825 if (mf == NULL)
826 printk(KERN_WARNING "IOC Active. No free Msg Frames! Count 0x%x Max 0x%x\n", ioc->mfcnt, ioc->req_depth);
827 mfcounter++;
828 if (mfcounter == PRINT_MF_COUNT)
829 printk(KERN_INFO "MF Count 0x%x Max 0x%x \n", ioc->mfcnt, ioc->req_depth);
830 #endif
831
832 dmfprintk((KERN_INFO MYNAM ": %s: mpt_get_msg_frame(%d,%d), got mf=%p\n",
833 ioc->name, handle, ioc->id, mf));
834 return mf;
835 }
836
837 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
838 /**
839 * mpt_put_msg_frame - Send a protocol specific MPT request frame
840 * to a IOC.
841 * @handle: Handle of registered MPT protocol driver
842 * @ioc: Pointer to MPT adapter structure
843 * @mf: Pointer to MPT request frame
844 *
845 * This routine posts a MPT request frame to the request post FIFO of a
846 * specific MPT adapter.
847 */
848 void
849 mpt_put_msg_frame(int handle, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
850 {
851 u32 mf_dma_addr;
852 int req_offset;
853 u16 req_idx; /* Request index */
854
855 /* ensure values are reset properly! */
856 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; /* byte */
857 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
858 /* u16! */
859 req_idx = cpu_to_le16(req_offset / ioc->req_sz);
860 mf->u.frame.hwhdr.msgctxu.fld.req_idx = req_idx;
861 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
862
863 #ifdef MPT_DEBUG_MSG_FRAME
864 {
865 u32 *m = mf->u.frame.hwhdr.__hdr;
866 int ii, n;
867
868 printk(KERN_INFO MYNAM ": %s: About to Put msg frame @ %p:\n" KERN_INFO " ",
869 ioc->name, m);
870 n = ioc->req_sz/4 - 1;
871 while (m[n] == 0)
872 n--;
873 for (ii=0; ii<=n; ii++) {
874 if (ii && ((ii%8)==0))
875 printk("\n" KERN_INFO " ");
876 printk(" %08x", le32_to_cpu(m[ii]));
877 }
878 printk("\n");
879 }
880 #endif
881
882 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
883 dsgprintk((MYIOC_s_INFO_FMT "mf_dma_addr=%x req_idx=%d RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, ioc->RequestNB[req_idx]));
884 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
885 }
886
887 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
888 /**
889 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
890 * @handle: Handle of registered MPT protocol driver
891 * @ioc: Pointer to MPT adapter structure
892 * @mf: Pointer to MPT request frame
893 *
894 * This routine places a MPT request frame back on the MPT adapter's
895 * FreeQ.
896 */
897 void
898 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
899 {
900 unsigned long flags;
901
902 /* Put Request back on FreeQ! */
903 spin_lock_irqsave(&ioc->FreeQlock, flags);
904 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
905 #ifdef MFCNT
906 ioc->mfcnt--;
907 #endif
908 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
909 }
910
911 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
912 /**
913 * mpt_add_sge - Place a simple SGE at address pAddr.
914 * @pAddr: virtual address for SGE
915 * @flagslength: SGE flags and data transfer length
916 * @dma_addr: Physical address
917 *
918 * This routine places a MPT request frame back on the MPT adapter's
919 * FreeQ.
920 */
921 void
922 mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
923 {
924 if (sizeof(dma_addr_t) == sizeof(u64)) {
925 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
926 u32 tmp = dma_addr & 0xFFFFFFFF;
927
928 pSge->FlagsLength = cpu_to_le32(flagslength);
929 pSge->Address.Low = cpu_to_le32(tmp);
930 tmp = (u32) ((u64)dma_addr >> 32);
931 pSge->Address.High = cpu_to_le32(tmp);
932
933 } else {
934 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
935 pSge->FlagsLength = cpu_to_le32(flagslength);
936 pSge->Address = cpu_to_le32(dma_addr);
937 }
938 }
939
940 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
941 /**
942 * mpt_send_handshake_request - Send MPT request via doorbell
943 * handshake method.
944 * @handle: Handle of registered MPT protocol driver
945 * @ioc: Pointer to MPT adapter structure
946 * @reqBytes: Size of the request in bytes
947 * @req: Pointer to MPT request frame
948 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
949 *
950 * This routine is used exclusively to send MptScsiTaskMgmt
951 * requests since they are required to be sent via doorbell handshake.
952 *
953 * NOTE: It is the callers responsibility to byte-swap fields in the
954 * request which are greater than 1 byte in size.
955 *
956 * Returns 0 for success, non-zero for failure.
957 */
958 int
959 mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
960 {
961 int r = 0;
962 u8 *req_as_bytes;
963 int ii;
964
965 /* State is known to be good upon entering
966 * this function so issue the bus reset
967 * request.
968 */
969
970 /*
971 * Emulate what mpt_put_msg_frame() does /wrt to sanity
972 * setting cb_idx/req_idx. But ONLY if this request
973 * is in proper (pre-alloc'd) request buffer range...
974 */
975 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
976 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
977 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
978 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
979 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle;
980 }
981
982 /* Make sure there are no doorbells */
983 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
984
985 CHIPREG_WRITE32(&ioc->chip->Doorbell,
986 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
987 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
988
989 /* Wait for IOC doorbell int */
990 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
991 return ii;
992 }
993
994 /* Read doorbell and check for active bit */
995 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
996 return -5;
997
998 dhsprintk((KERN_INFO MYNAM ": %s: mpt_send_handshake_request start, WaitCnt=%d\n",
999 ioc->name, ii));
1000
1001 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1002
1003 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1004 return -2;
1005 }
1006
1007 /* Send request via doorbell handshake */
1008 req_as_bytes = (u8 *) req;
1009 for (ii = 0; ii < reqBytes/4; ii++) {
1010 u32 word;
1011
1012 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1013 (req_as_bytes[(ii*4) + 1] << 8) |
1014 (req_as_bytes[(ii*4) + 2] << 16) |
1015 (req_as_bytes[(ii*4) + 3] << 24));
1016 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1017 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1018 r = -3;
1019 break;
1020 }
1021 }
1022
1023 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1024 r = 0;
1025 else
1026 r = -4;
1027
1028 /* Make sure there are no doorbells */
1029 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1030
1031 return r;
1032 }
1033
1034 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1035 /**
1036 * mpt_verify_adapter - Given a unique IOC identifier, set pointer to
1037 * the associated MPT adapter structure.
1038 * @iocid: IOC unique identifier (integer)
1039 * @iocpp: Pointer to pointer to IOC adapter
1040 *
1041 * Returns iocid and sets iocpp.
1042 */
1043 int
1044 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1045 {
1046 MPT_ADAPTER *ioc;
1047
1048 list_for_each_entry(ioc,&ioc_list,list) {
1049 if (ioc->id == iocid) {
1050 *iocpp =ioc;
1051 return iocid;
1052 }
1053 }
1054
1055 *iocpp = NULL;
1056 return -1;
1057 }
1058
1059 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1060 /*
1061 * mptbase_probe - Install a PCI intelligent MPT adapter.
1062 * @pdev: Pointer to pci_dev structure
1063 *
1064 * This routine performs all the steps necessary to bring the IOC of
1065 * a MPT adapter to a OPERATIONAL state. This includes registering
1066 * memory regions, registering the interrupt, and allocating request
1067 * and reply memory pools.
1068 *
1069 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1070 * MPT adapter.
1071 *
1072 * Returns 0 for success, non-zero for failure.
1073 *
1074 * TODO: Add support for polled controllers
1075 */
1076 static int __devinit
1077 mptbase_probe(struct pci_dev *pdev, const struct pci_device_id *id)
1078 {
1079 MPT_ADAPTER *ioc;
1080 u8 __iomem *mem;
1081 unsigned long mem_phys;
1082 unsigned long port;
1083 u32 msize;
1084 u32 psize;
1085 int ii;
1086 int r = -ENODEV;
1087 u64 mask = 0xffffffffffffffffULL;
1088 u8 revision;
1089 u8 pcixcmd;
1090 static int mpt_ids = 0;
1091 #ifdef CONFIG_PROC_FS
1092 struct proc_dir_entry *dent, *ent;
1093 #endif
1094
1095 if (pci_enable_device(pdev))
1096 return r;
1097
1098 dinitprintk((KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1099
1100 if (!pci_set_dma_mask(pdev, mask)) {
1101 dprintk((KERN_INFO MYNAM
1102 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n"));
1103 } else if (pci_set_dma_mask(pdev, (u64) 0xffffffff)) {
1104 printk(KERN_WARNING MYNAM ": 32 BIT PCI BUS DMA ADDRESSING NOT SUPPORTED\n");
1105 return r;
1106 }
1107
1108 if (!pci_set_consistent_dma_mask(pdev, mask))
1109 dprintk((KERN_INFO MYNAM
1110 ": Using 64 bit consistent mask\n"));
1111 else
1112 dprintk((KERN_INFO MYNAM
1113 ": Not using 64 bit consistent mask\n"));
1114
1115 ioc = kmalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
1116 if (ioc == NULL) {
1117 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1118 return -ENOMEM;
1119 }
1120 memset(ioc, 0, sizeof(MPT_ADAPTER));
1121 ioc->alloc_total = sizeof(MPT_ADAPTER);
1122 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1123 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1124
1125 ioc->pcidev = pdev;
1126 ioc->diagPending = 0;
1127 spin_lock_init(&ioc->diagLock);
1128
1129 /* Initialize the event logging.
1130 */
1131 ioc->eventTypes = 0; /* None */
1132 ioc->eventContext = 0;
1133 ioc->eventLogSize = 0;
1134 ioc->events = NULL;
1135
1136 #ifdef MFCNT
1137 ioc->mfcnt = 0;
1138 #endif
1139
1140 ioc->cached_fw = NULL;
1141
1142 /* Initilize SCSI Config Data structure
1143 */
1144 memset(&ioc->spi_data, 0, sizeof(ScsiCfgData));
1145
1146 /* Initialize the running configQ head.
1147 */
1148 INIT_LIST_HEAD(&ioc->configQ);
1149
1150 /* Find lookup slot. */
1151 INIT_LIST_HEAD(&ioc->list);
1152 ioc->id = mpt_ids++;
1153
1154 mem_phys = msize = 0;
1155 port = psize = 0;
1156 for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1157 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1158 /* Get I/O space! */
1159 port = pci_resource_start(pdev, ii);
1160 psize = pci_resource_len(pdev,ii);
1161 } else {
1162 /* Get memmap */
1163 mem_phys = pci_resource_start(pdev, ii);
1164 msize = pci_resource_len(pdev,ii);
1165 break;
1166 }
1167 }
1168 ioc->mem_size = msize;
1169
1170 if (ii == DEVICE_COUNT_RESOURCE) {
1171 printk(KERN_ERR MYNAM ": ERROR - MPT adapter has no memory regions defined!\n");
1172 kfree(ioc);
1173 return -EINVAL;
1174 }
1175
1176 dinitprintk((KERN_INFO MYNAM ": MPT adapter @ %lx, msize=%dd bytes\n", mem_phys, msize));
1177 dinitprintk((KERN_INFO MYNAM ": (port i/o @ %lx, psize=%dd bytes)\n", port, psize));
1178
1179 mem = NULL;
1180 /* Get logical ptr for PciMem0 space */
1181 /*mem = ioremap(mem_phys, msize);*/
1182 mem = ioremap(mem_phys, 0x100);
1183 if (mem == NULL) {
1184 printk(KERN_ERR MYNAM ": ERROR - Unable to map adapter memory!\n");
1185 kfree(ioc);
1186 return -EINVAL;
1187 }
1188 ioc->memmap = mem;
1189 dinitprintk((KERN_INFO MYNAM ": mem = %p, mem_phys = %lx\n", mem, mem_phys));
1190
1191 dinitprintk((KERN_INFO MYNAM ": facts @ %p, pfacts[0] @ %p\n",
1192 &ioc->facts, &ioc->pfacts[0]));
1193
1194 ioc->mem_phys = mem_phys;
1195 ioc->chip = (SYSIF_REGS __iomem *)mem;
1196
1197 /* Save Port IO values in case we need to do downloadboot */
1198 {
1199 u8 *pmem = (u8*)port;
1200 ioc->pio_mem_phys = port;
1201 ioc->pio_chip = (SYSIF_REGS __iomem *)pmem;
1202 }
1203
1204 if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC909) {
1205 ioc->prod_name = "LSIFC909";
1206 ioc->bus_type = FC;
1207 }
1208 if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
1209 ioc->prod_name = "LSIFC929";
1210 ioc->bus_type = FC;
1211 }
1212 else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC919) {
1213 ioc->prod_name = "LSIFC919";
1214 ioc->bus_type = FC;
1215 }
1216 else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929X) {
1217 pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
1218 ioc->bus_type = FC;
1219 if (revision < XL_929) {
1220 ioc->prod_name = "LSIFC929X";
1221 /* 929X Chip Fix. Set Split transactions level
1222 * for PCIX. Set MOST bits to zero.
1223 */
1224 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1225 pcixcmd &= 0x8F;
1226 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1227 } else {
1228 ioc->prod_name = "LSIFC929XL";
1229 /* 929XL Chip Fix. Set MMRBC to 0x08.
1230 */
1231 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1232 pcixcmd |= 0x08;
1233 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1234 }
1235 }
1236 else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC919X) {
1237 ioc->prod_name = "LSIFC919X";
1238 ioc->bus_type = FC;
1239 /* 919X Chip Fix. Set Split transactions level
1240 * for PCIX. Set MOST bits to zero.
1241 */
1242 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1243 pcixcmd &= 0x8F;
1244 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1245 }
1246 else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) {
1247 ioc->prod_name = "LSI53C1030";
1248 ioc->bus_type = SCSI;
1249 /* 1030 Chip Fix. Disable Split transactions
1250 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1251 */
1252 pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
1253 if (revision < C0_1030) {
1254 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1255 pcixcmd &= 0x8F;
1256 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1257 }
1258 }
1259 else if (pdev->device == MPI_MANUFACTPAGE_DEVID_1030_53C1035) {
1260 ioc->prod_name = "LSI53C1035";
1261 ioc->bus_type = SCSI;
1262 }
1263
1264 sprintf(ioc->name, "ioc%d", ioc->id);
1265
1266 spin_lock_init(&ioc->FreeQlock);
1267
1268 /* Disable all! */
1269 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1270 ioc->active = 0;
1271 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1272
1273 /* Set lookup ptr. */
1274 list_add_tail(&ioc->list, &ioc_list);
1275
1276 ioc->pci_irq = -1;
1277 if (pdev->irq) {
1278 r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc);
1279
1280 if (r < 0) {
1281 #ifndef __sparc__
1282 printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %d!\n",
1283 ioc->name, pdev->irq);
1284 #else
1285 printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %s!\n",
1286 ioc->name, __irq_itoa(pdev->irq));
1287 #endif
1288 list_del(&ioc->list);
1289 iounmap(mem);
1290 kfree(ioc);
1291 return -EBUSY;
1292 }
1293
1294 ioc->pci_irq = pdev->irq;
1295
1296 pci_set_master(pdev); /* ?? */
1297 pci_set_drvdata(pdev, ioc);
1298
1299 #ifndef __sparc__
1300 dprintk((KERN_INFO MYNAM ": %s installed at interrupt %d\n", ioc->name, pdev->irq));
1301 #else
1302 dprintk((KERN_INFO MYNAM ": %s installed at interrupt %s\n", ioc->name, __irq_itoa(pdev->irq)));
1303 #endif
1304 }
1305
1306 /* NEW! 20010220 -sralston
1307 * Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1308 */
1309 mpt_detect_bound_ports(ioc, pdev);
1310
1311 if ((r = mpt_do_ioc_recovery(ioc,
1312 MPT_HOSTEVENT_IOC_BRINGUP, CAN_SLEEP)) != 0) {
1313 printk(KERN_WARNING MYNAM
1314 ": WARNING - %s did not initialize properly! (%d)\n",
1315 ioc->name, r);
1316
1317 list_del(&ioc->list);
1318 free_irq(ioc->pci_irq, ioc);
1319 iounmap(mem);
1320 kfree(ioc);
1321 pci_set_drvdata(pdev, NULL);
1322 return r;
1323 }
1324
1325 /* call per device driver probe entry point */
1326 for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
1327 if(MptDeviceDriverHandlers[ii] &&
1328 MptDeviceDriverHandlers[ii]->probe) {
1329 MptDeviceDriverHandlers[ii]->probe(pdev,id);
1330 }
1331 }
1332
1333 #ifdef CONFIG_PROC_FS
1334 /*
1335 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
1336 */
1337 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
1338 if (dent) {
1339 ent = create_proc_entry("info", S_IFREG|S_IRUGO, dent);
1340 if (ent) {
1341 ent->read_proc = procmpt_iocinfo_read;
1342 ent->data = ioc;
1343 }
1344 ent = create_proc_entry("summary", S_IFREG|S_IRUGO, dent);
1345 if (ent) {
1346 ent->read_proc = procmpt_summary_read;
1347 ent->data = ioc;
1348 }
1349 }
1350 #endif
1351
1352 return 0;
1353 }
1354
1355 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1356 /*
1357 * mptbase_remove - Remove a PCI intelligent MPT adapter.
1358 * @pdev: Pointer to pci_dev structure
1359 *
1360 */
1361
1362 static void __devexit
1363 mptbase_remove(struct pci_dev *pdev)
1364 {
1365 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1366 char pname[32];
1367 int ii;
1368
1369 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
1370 remove_proc_entry(pname, NULL);
1371 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
1372 remove_proc_entry(pname, NULL);
1373 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
1374 remove_proc_entry(pname, NULL);
1375
1376 /* call per device driver remove entry point */
1377 for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
1378 if(MptDeviceDriverHandlers[ii] &&
1379 MptDeviceDriverHandlers[ii]->remove) {
1380 MptDeviceDriverHandlers[ii]->remove(pdev);
1381 }
1382 }
1383
1384 /* Disable interrupts! */
1385 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1386
1387 ioc->active = 0;
1388 synchronize_irq(pdev->irq);
1389
1390 /* Clear any lingering interrupt */
1391 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1392
1393 CHIPREG_READ32(&ioc->chip->IntStatus);
1394
1395 mpt_adapter_dispose(ioc);
1396
1397 pci_set_drvdata(pdev, NULL);
1398 }
1399
1400 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1401 /*
1402 * mptbase_shutdown -
1403 *
1404 */
1405 static void
1406 mptbase_shutdown(struct device * dev)
1407 {
1408 int ii;
1409
1410 /* call per device driver shutdown entry point */
1411 for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
1412 if(MptDeviceDriverHandlers[ii] &&
1413 MptDeviceDriverHandlers[ii]->shutdown) {
1414 MptDeviceDriverHandlers[ii]->shutdown(dev);
1415 }
1416 }
1417
1418 }
1419
1420
1421 /**************************************************************************
1422 * Power Management
1423 */
1424 #ifdef CONFIG_PM
1425 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1426 /*
1427 * mptbase_suspend - Fusion MPT base driver suspend routine.
1428 *
1429 *
1430 */
1431 static int
1432 mptbase_suspend(struct pci_dev *pdev, u32 state)
1433 {
1434 u32 device_state;
1435 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1436 int ii;
1437
1438 switch(state)
1439 {
1440 case 1: /* S1 */
1441 device_state=1; /* D1 */;
1442 break;
1443 case 3: /* S3 */
1444 case 4: /* S4 */
1445 device_state=3; /* D3 */;
1446 break;
1447 default:
1448 return -EAGAIN /*FIXME*/;
1449 break;
1450 }
1451
1452 printk(MYIOC_s_INFO_FMT
1453 "pci-suspend: pdev=0x%p, slot=%s, Entering operating state [D%d]\n",
1454 ioc->name, pdev, pci_name(pdev), device_state);
1455
1456 /* call per device driver suspend entry point */
1457 for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
1458 if(MptDeviceDriverHandlers[ii] &&
1459 MptDeviceDriverHandlers[ii]->suspend) {
1460 MptDeviceDriverHandlers[ii]->suspend(pdev, state);
1461 }
1462 }
1463
1464 pci_save_state(pdev);
1465
1466 /* put ioc into READY_STATE */
1467 if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
1468 printk(MYIOC_s_ERR_FMT
1469 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
1470 }
1471
1472 /* disable interrupts */
1473 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1474 ioc->active = 0;
1475
1476 /* Clear any lingering interrupt */
1477 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1478
1479 pci_disable_device(pdev);
1480 pci_set_power_state(pdev, device_state);
1481
1482 return 0;
1483 }
1484
1485 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1486 /*
1487 * mptbase_resume - Fusion MPT base driver resume routine.
1488 *
1489 *
1490 */
1491 static int
1492 mptbase_resume(struct pci_dev *pdev)
1493 {
1494 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1495 u32 device_state = pdev->current_state;
1496 int recovery_state;
1497 int ii;
1498
1499 printk(MYIOC_s_INFO_FMT
1500 "pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
1501 ioc->name, pdev, pci_name(pdev), device_state);
1502
1503 pci_set_power_state(pdev, 0);
1504 pci_restore_state(pdev);
1505 pci_enable_device(pdev);
1506
1507 /* enable interrupts */
1508 CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM));
1509 ioc->active = 1;
1510
1511 /* F/W not running */
1512 if(!CHIPREG_READ32(&ioc->chip->Doorbell)) {
1513 /* enable domain validation flags */
1514 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
1515 ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_NEED_DV;
1516 }
1517 }
1518
1519 printk(MYIOC_s_INFO_FMT
1520 "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
1521 ioc->name,
1522 (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
1523 CHIPREG_READ32(&ioc->chip->Doorbell));
1524
1525 /* bring ioc to operational state */
1526 if ((recovery_state = mpt_do_ioc_recovery(ioc,
1527 MPT_HOSTEVENT_IOC_RECOVER, CAN_SLEEP)) != 0) {
1528 printk(MYIOC_s_INFO_FMT
1529 "pci-resume: Cannot recover, error:[%x]\n",
1530 ioc->name, recovery_state);
1531 } else {
1532 printk(MYIOC_s_INFO_FMT
1533 "pci-resume: success\n", ioc->name);
1534 }
1535
1536 /* call per device driver resume entry point */
1537 for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
1538 if(MptDeviceDriverHandlers[ii] &&
1539 MptDeviceDriverHandlers[ii]->resume) {
1540 MptDeviceDriverHandlers[ii]->resume(pdev);
1541 }
1542 }
1543
1544 return 0;
1545 }
1546 #endif
1547
1548 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1549 /*
1550 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
1551 * @ioc: Pointer to MPT adapter structure
1552 * @reason: Event word / reason
1553 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1554 *
1555 * This routine performs all the steps necessary to bring the IOC
1556 * to a OPERATIONAL state.
1557 *
1558 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1559 * MPT adapter.
1560 *
1561 * Returns:
1562 * 0 for success
1563 * -1 if failed to get board READY
1564 * -2 if READY but IOCFacts Failed
1565 * -3 if READY but PrimeIOCFifos Failed
1566 * -4 if READY but IOCInit Failed
1567 */
1568 static int
1569 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
1570 {
1571 int hard_reset_done = 0;
1572 int alt_ioc_ready = 0;
1573 int hard;
1574 int rc=0;
1575 int ii;
1576 int handlers;
1577 int ret = 0;
1578 int reset_alt_ioc_active = 0;
1579
1580 printk(KERN_INFO MYNAM ": Initiating %s %s\n",
1581 ioc->name, reason==MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
1582
1583 /* Disable reply interrupts (also blocks FreeQ) */
1584 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1585 ioc->active = 0;
1586
1587 if (ioc->alt_ioc) {
1588 if (ioc->alt_ioc->active)
1589 reset_alt_ioc_active = 1;
1590
1591 /* Disable alt-IOC's reply interrupts (and FreeQ) for a bit ... */
1592 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 0xFFFFFFFF);
1593 ioc->alt_ioc->active = 0;
1594 }
1595
1596 hard = 1;
1597 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
1598 hard = 0;
1599
1600 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
1601 if (hard_reset_done == -4) {
1602 printk(KERN_WARNING MYNAM ": %s Owned by PEER..skipping!\n",
1603 ioc->name);
1604
1605 if (reset_alt_ioc_active && ioc->alt_ioc) {
1606 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
1607 dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
1608 ioc->alt_ioc->name));
1609 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM));
1610 ioc->alt_ioc->active = 1;
1611 }
1612
1613 } else {
1614 printk(KERN_WARNING MYNAM ": %s NOT READY WARNING!\n",
1615 ioc->name);
1616 }
1617 return -1;
1618 }
1619
1620 /* hard_reset_done = 0 if a soft reset was performed
1621 * and 1 if a hard reset was performed.
1622 */
1623 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
1624 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
1625 alt_ioc_ready = 1;
1626 else
1627 printk(KERN_WARNING MYNAM
1628 ": alt-%s: Not ready WARNING!\n",
1629 ioc->alt_ioc->name);
1630 }
1631
1632 for (ii=0; ii<5; ii++) {
1633 /* Get IOC facts! Allow 5 retries */
1634 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
1635 break;
1636 }
1637
1638
1639 if (ii == 5) {
1640 dinitprintk((MYIOC_s_INFO_FMT "Retry IocFacts failed rc=%x\n", ioc->name, rc));
1641 ret = -2;
1642 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
1643 MptDisplayIocCapabilities(ioc);
1644 }
1645
1646 if (alt_ioc_ready) {
1647 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
1648 dinitprintk((MYIOC_s_INFO_FMT "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc));
1649 /* Retry - alt IOC was initialized once
1650 */
1651 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
1652 }
1653 if (rc) {
1654 dinitprintk((MYIOC_s_INFO_FMT "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
1655 alt_ioc_ready = 0;
1656 reset_alt_ioc_active = 0;
1657 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
1658 MptDisplayIocCapabilities(ioc->alt_ioc);
1659 }
1660 }
1661
1662 /* Prime reply & request queues!
1663 * (mucho alloc's) Must be done prior to
1664 * init as upper addresses are needed for init.
1665 * If fails, continue with alt-ioc processing
1666 */
1667 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
1668 ret = -3;
1669
1670 /* May need to check/upload firmware & data here!
1671 * If fails, continue with alt-ioc processing
1672 */
1673 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
1674 ret = -4;
1675 // NEW!
1676 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
1677 printk(KERN_WARNING MYNAM ": alt-%s: (%d) FIFO mgmt alloc WARNING!\n",
1678 ioc->alt_ioc->name, rc);
1679 alt_ioc_ready = 0;
1680 reset_alt_ioc_active = 0;
1681 }
1682
1683 if (alt_ioc_ready) {
1684 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
1685 alt_ioc_ready = 0;
1686 reset_alt_ioc_active = 0;
1687 printk(KERN_WARNING MYNAM
1688 ": alt-%s: (%d) init failure WARNING!\n",
1689 ioc->alt_ioc->name, rc);
1690 }
1691 }
1692
1693 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
1694 if (ioc->upload_fw) {
1695 ddlprintk((MYIOC_s_INFO_FMT
1696 "firmware upload required!\n", ioc->name));
1697
1698 /* Controller is not operational, cannot do upload
1699 */
1700 if (ret == 0) {
1701 rc = mpt_do_upload(ioc, sleepFlag);
1702 if (rc != 0)
1703 printk(KERN_WARNING MYNAM ": firmware upload failure!\n");
1704 }
1705 }
1706 }
1707
1708 if (ret == 0) {
1709 /* Enable! (reply interrupt) */
1710 CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM));
1711 ioc->active = 1;
1712 }
1713
1714 if (reset_alt_ioc_active && ioc->alt_ioc) {
1715 /* (re)Enable alt-IOC! (reply interrupt) */
1716 dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
1717 ioc->alt_ioc->name));
1718 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM));
1719 ioc->alt_ioc->active = 1;
1720 }
1721
1722 /* NEW! 20010120 -sralston
1723 * Enable MPT base driver management of EventNotification
1724 * and EventAck handling.
1725 */
1726 if ((ret == 0) && (!ioc->facts.EventState))
1727 (void) SendEventNotification(ioc, 1); /* 1=Enable EventNotification */
1728
1729 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
1730 (void) SendEventNotification(ioc->alt_ioc, 1); /* 1=Enable EventNotification */
1731
1732 /* (Bugzilla:fibrebugs, #513)
1733 * Bug fix (part 2)! 20010905 -sralston
1734 * Add additional "reason" check before call to GetLanConfigPages
1735 * (combined with GetIoUnitPage2 call). This prevents a somewhat
1736 * recursive scenario; GetLanConfigPages times out, timer expired
1737 * routine calls HardResetHandler, which calls into here again,
1738 * and we try GetLanConfigPages again...
1739 */
1740 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
1741 if (ioc->bus_type == FC) {
1742 /*
1743 * Pre-fetch FC port WWN and stuff...
1744 * (FCPortPage0_t stuff)
1745 */
1746 for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
1747 (void) GetFcPortPage0(ioc, ii);
1748 }
1749
1750 if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
1751 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
1752 /*
1753 * Pre-fetch the ports LAN MAC address!
1754 * (LANPage1_t stuff)
1755 */
1756 (void) GetLanConfigPages(ioc);
1757 #ifdef MPT_DEBUG
1758 {
1759 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
1760 dprintk((MYIOC_s_INFO_FMT "LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
1761 ioc->name, a[5], a[4], a[3], a[2], a[1], a[0] ));
1762 }
1763 #endif
1764 }
1765 } else {
1766 /* Get NVRAM and adapter maximums from SPP 0 and 2
1767 */
1768 mpt_GetScsiPortSettings(ioc, 0);
1769
1770 /* Get version and length of SDP 1
1771 */
1772 mpt_readScsiDevicePageHeaders(ioc, 0);
1773
1774 /* Find IM volumes
1775 */
1776 if (ioc->facts.MsgVersion >= 0x0102)
1777 mpt_findImVolumes(ioc);
1778
1779 /* Check, and possibly reset, the coalescing value
1780 */
1781 mpt_read_ioc_pg_1(ioc);
1782
1783 mpt_read_ioc_pg_4(ioc);
1784 }
1785
1786 GetIoUnitPage2(ioc);
1787 }
1788
1789 /*
1790 * Call each currently registered protocol IOC reset handler
1791 * with post-reset indication.
1792 * NOTE: If we're doing _IOC_BRINGUP, there can be no
1793 * MptResetHandlers[] registered yet.
1794 */
1795 if (hard_reset_done) {
1796 rc = handlers = 0;
1797 for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
1798 if ((ret == 0) && MptResetHandlers[ii]) {
1799 dprintk((MYIOC_s_INFO_FMT "Calling IOC post_reset handler #%d\n",
1800 ioc->name, ii));
1801 rc += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_POST_RESET);
1802 handlers++;
1803 }
1804
1805 if (alt_ioc_ready && MptResetHandlers[ii]) {
1806 dprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
1807 ioc->name, ioc->alt_ioc->name, ii));
1808 rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
1809 handlers++;
1810 }
1811 }
1812 /* FIXME? Examine results here? */
1813 }
1814
1815 return ret;
1816 }
1817
1818 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1819 /*
1820 * mpt_detect_bound_ports - Search for PCI bus/dev_function
1821 * which matches PCI bus/dev_function (+/-1) for newly discovered 929,
1822 * 929X, 1030 or 1035.
1823 * @ioc: Pointer to MPT adapter structure
1824 * @pdev: Pointer to (struct pci_dev) structure
1825 *
1826 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
1827 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
1828 */
1829 static void
1830 mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
1831 {
1832 unsigned int match_lo, match_hi;
1833 MPT_ADAPTER *ioc_srch;
1834
1835 match_lo = pdev->devfn-1;
1836 match_hi = pdev->devfn+1;
1837 dprintk((MYIOC_s_INFO_FMT "PCI bus/devfn=%x/%x, searching for devfn match on %x or %x\n",
1838 ioc->name, pdev->bus->number, pdev->devfn, match_lo, match_hi));
1839
1840 list_for_each_entry(ioc_srch, &ioc_list, list) {
1841 struct pci_dev *_pcidev = ioc_srch->pcidev;
1842
1843 if ((_pcidev->device == pdev->device) &&
1844 (_pcidev->bus->number == pdev->bus->number) &&
1845 (_pcidev->devfn == match_lo || _pcidev->devfn == match_hi) ) {
1846 /* Paranoia checks */
1847 if (ioc->alt_ioc != NULL) {
1848 printk(KERN_WARNING MYNAM ": Oops, already bound (%s <==> %s)!\n",
1849 ioc->name, ioc->alt_ioc->name);
1850 break;
1851 } else if (ioc_srch->alt_ioc != NULL) {
1852 printk(KERN_WARNING MYNAM ": Oops, already bound (%s <==> %s)!\n",
1853 ioc_srch->name, ioc_srch->alt_ioc->name);
1854 break;
1855 }
1856 dprintk((KERN_INFO MYNAM ": FOUND! binding %s <==> %s\n",
1857 ioc->name, ioc_srch->name));
1858 ioc_srch->alt_ioc = ioc;
1859 ioc->alt_ioc = ioc_srch;
1860 break;
1861 }
1862 }
1863 }
1864
1865 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1866 /*
1867 * mpt_adapter_disable - Disable misbehaving MPT adapter.
1868 * @this: Pointer to MPT adapter structure
1869 */
1870 static void
1871 mpt_adapter_disable(MPT_ADAPTER *ioc)
1872 {
1873 int sz;
1874 int ret;
1875
1876 if (ioc->cached_fw != NULL) {
1877 ddlprintk((KERN_INFO MYNAM ": mpt_adapter_disable: Pushing FW onto adapter\n"));
1878 if ((ret = mpt_downloadboot(ioc, NO_SLEEP)) < 0) {
1879 printk(KERN_WARNING MYNAM
1880 ": firmware downloadboot failure (%d)!\n", ret);
1881 }
1882 }
1883
1884 /* Disable adapter interrupts! */
1885 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1886 ioc->active = 0;
1887 /* Clear any lingering interrupt */
1888 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1889
1890 if (ioc->alloc != NULL) {
1891 sz = ioc->alloc_sz;
1892 dexitprintk((KERN_INFO MYNAM ": %s.free @ %p, sz=%d bytes\n",
1893 ioc->name, ioc->alloc, ioc->alloc_sz));
1894 pci_free_consistent(ioc->pcidev, sz,
1895 ioc->alloc, ioc->alloc_dma);
1896 ioc->reply_frames = NULL;
1897 ioc->req_frames = NULL;
1898 ioc->alloc = NULL;
1899 ioc->alloc_total -= sz;
1900 }
1901
1902 if (ioc->sense_buf_pool != NULL) {
1903 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
1904 pci_free_consistent(ioc->pcidev, sz,
1905 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
1906 ioc->sense_buf_pool = NULL;
1907 ioc->alloc_total -= sz;
1908 }
1909
1910 if (ioc->events != NULL){
1911 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
1912 kfree(ioc->events);
1913 ioc->events = NULL;
1914 ioc->alloc_total -= sz;
1915 }
1916
1917 if (ioc->cached_fw != NULL) {
1918 sz = ioc->facts.FWImageSize;
1919 pci_free_consistent(ioc->pcidev, sz,
1920 ioc->cached_fw, ioc->cached_fw_dma);
1921 ioc->cached_fw = NULL;
1922 ioc->alloc_total -= sz;
1923 }
1924
1925 if (ioc->spi_data.nvram != NULL) {
1926 kfree(ioc->spi_data.nvram);
1927 ioc->spi_data.nvram = NULL;
1928 }
1929
1930 if (ioc->spi_data.pIocPg3 != NULL) {
1931 kfree(ioc->spi_data.pIocPg3);
1932 ioc->spi_data.pIocPg3 = NULL;
1933 }
1934
1935 if (ioc->spi_data.pIocPg4 != NULL) {
1936 sz = ioc->spi_data.IocPg4Sz;
1937 pci_free_consistent(ioc->pcidev, sz,
1938 ioc->spi_data.pIocPg4,
1939 ioc->spi_data.IocPg4_dma);
1940 ioc->spi_data.pIocPg4 = NULL;
1941 ioc->alloc_total -= sz;
1942 }
1943
1944 if (ioc->ReqToChain != NULL) {
1945 kfree(ioc->ReqToChain);
1946 kfree(ioc->RequestNB);
1947 ioc->ReqToChain = NULL;
1948 }
1949
1950 if (ioc->ChainToChain != NULL) {
1951 kfree(ioc->ChainToChain);
1952 ioc->ChainToChain = NULL;
1953 }
1954 }
1955
1956 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1957 /*
1958 * mpt_adapter_dispose - Free all resources associated with a MPT
1959 * adapter.
1960 * @ioc: Pointer to MPT adapter structure
1961 *
1962 * This routine unregisters h/w resources and frees all alloc'd memory
1963 * associated with a MPT adapter structure.
1964 */
1965 static void
1966 mpt_adapter_dispose(MPT_ADAPTER *ioc)
1967 {
1968 if (ioc != NULL) {
1969 int sz_first, sz_last;
1970
1971 sz_first = ioc->alloc_total;
1972
1973 mpt_adapter_disable(ioc);
1974
1975 if (ioc->pci_irq != -1) {
1976 free_irq(ioc->pci_irq, ioc);
1977 ioc->pci_irq = -1;
1978 }
1979
1980 if (ioc->memmap != NULL)
1981 iounmap(ioc->memmap);
1982
1983 #if defined(CONFIG_MTRR) && 0
1984 if (ioc->mtrr_reg > 0) {
1985 mtrr_del(ioc->mtrr_reg, 0, 0);
1986 dprintk((KERN_INFO MYNAM ": %s: MTRR region de-registered\n", ioc->name));
1987 }
1988 #endif
1989
1990 /* Zap the adapter lookup ptr! */
1991 list_del(&ioc->list);
1992
1993 sz_last = ioc->alloc_total;
1994 dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
1995 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
1996 kfree(ioc);
1997 }
1998 }
1999
2000 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2001 /*
2002 * MptDisplayIocCapabilities - Disply IOC's capacilities.
2003 * @ioc: Pointer to MPT adapter structure
2004 */
2005 static void
2006 MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2007 {
2008 int i = 0;
2009
2010 printk(KERN_INFO "%s: ", ioc->name);
2011 if (ioc->prod_name && strlen(ioc->prod_name) > 3)
2012 printk("%s: ", ioc->prod_name+3);
2013 printk("Capabilities={");
2014
2015 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2016 printk("Initiator");
2017 i++;
2018 }
2019
2020 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2021 printk("%sTarget", i ? "," : "");
2022 i++;
2023 }
2024
2025 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2026 printk("%sLAN", i ? "," : "");
2027 i++;
2028 }
2029
2030 #if 0
2031 /*
2032 * This would probably evoke more questions than it's worth
2033 */
2034 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2035 printk("%sLogBusAddr", i ? "," : "");
2036 i++;
2037 }
2038 #endif
2039
2040 printk("}\n");
2041 }
2042
2043 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2044 /*
2045 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2046 * @ioc: Pointer to MPT_ADAPTER structure
2047 * @force: Force hard KickStart of IOC
2048 * @sleepFlag: Specifies whether the process can sleep
2049 *
2050 * Returns:
2051 * 1 - DIAG reset and READY
2052 * 0 - READY initially OR soft reset and READY
2053 * -1 - Any failure on KickStart
2054 * -2 - Msg Unit Reset Failed
2055 * -3 - IO Unit Reset Failed
2056 * -4 - IOC owned by a PEER
2057 */
2058 static int
2059 MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2060 {
2061 u32 ioc_state;
2062 int statefault = 0;
2063 int cntdn;
2064 int hard_reset_done = 0;
2065 int r;
2066 int ii;
2067 int whoinit;
2068
2069 /* Get current [raw] IOC state */
2070 ioc_state = mpt_GetIocState(ioc, 0);
2071 dhsprintk((KERN_INFO MYNAM "::MakeIocReady, %s [raw] state=%08x\n", ioc->name, ioc_state));
2072
2073 /*
2074 * Check to see if IOC got left/stuck in doorbell handshake
2075 * grip of death. If so, hard reset the IOC.
2076 */
2077 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2078 statefault = 1;
2079 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2080 ioc->name);
2081 }
2082
2083 /* Is it already READY? */
2084 if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
2085 return 0;
2086
2087 /*
2088 * Check to see if IOC is in FAULT state.
2089 */
2090 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2091 statefault = 2;
2092 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2093 ioc->name);
2094 printk(KERN_WARNING " FAULT code = %04xh\n",
2095 ioc_state & MPI_DOORBELL_DATA_MASK);
2096 }
2097
2098 /*
2099 * Hmmm... Did it get left operational?
2100 */
2101 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2102 dinitprintk((MYIOC_s_WARN_FMT "IOC operational unexpected\n",
2103 ioc->name));
2104
2105 /* Check WhoInit.
2106 * If PCI Peer, exit.
2107 * Else, if no fault conditions are present, issue a MessageUnitReset
2108 * Else, fall through to KickStart case
2109 */
2110 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2111 dprintk((KERN_WARNING MYNAM
2112 ": whoinit 0x%x\n statefault %d force %d\n",
2113 whoinit, statefault, force));
2114 if (whoinit == MPI_WHOINIT_PCI_PEER)
2115 return -4;
2116 else {
2117 if ((statefault == 0 ) && (force == 0)) {
2118 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2119 return 0;
2120 }
2121 statefault = 3;
2122 }
2123 }
2124
2125 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2126 if (hard_reset_done < 0)
2127 return -1;
2128
2129 /*
2130 * Loop here waiting for IOC to come READY.
2131 */
2132 ii = 0;
2133 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
2134
2135 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2136 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
2137 /*
2138 * BIOS or previous driver load left IOC in OP state.
2139 * Reset messaging FIFOs.
2140 */
2141 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
2142 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
2143 return -2;
2144 }
2145 } else if (ioc_state == MPI_IOC_STATE_RESET) {
2146 /*
2147 * Something is wrong. Try to get IOC back
2148 * to a known state.
2149 */
2150 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
2151 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
2152 return -3;
2153 }
2154 }
2155
2156 ii++; cntdn--;
2157 if (!cntdn) {
2158 printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
2159 ioc->name, (int)((ii+5)/HZ));
2160 return -ETIME;
2161 }
2162
2163 if (sleepFlag == CAN_SLEEP) {
2164 msleep_interruptible(1);
2165 } else {
2166 mdelay (1); /* 1 msec delay */
2167 }
2168
2169 }
2170
2171 if (statefault < 3) {
2172 printk(MYIOC_s_INFO_FMT "Recovered from %s\n",
2173 ioc->name,
2174 statefault==1 ? "stuck handshake" : "IOC FAULT");
2175 }
2176
2177 return hard_reset_done;
2178 }
2179
2180 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2181 /*
2182 * mpt_GetIocState - Get the current state of a MPT adapter.
2183 * @ioc: Pointer to MPT_ADAPTER structure
2184 * @cooked: Request raw or cooked IOC state
2185 *
2186 * Returns all IOC Doorbell register bits if cooked==0, else just the
2187 * Doorbell bits in MPI_IOC_STATE_MASK.
2188 */
2189 u32
2190 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
2191 {
2192 u32 s, sc;
2193
2194 /* Get! */
2195 s = CHIPREG_READ32(&ioc->chip->Doorbell);
2196 // dprintk((MYIOC_s_INFO_FMT "raw state = %08x\n", ioc->name, s));
2197 sc = s & MPI_IOC_STATE_MASK;
2198
2199 /* Save! */
2200 ioc->last_state = sc;
2201
2202 return cooked ? sc : s;
2203 }
2204
2205 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2206 /*
2207 * GetIocFacts - Send IOCFacts request to MPT adapter.
2208 * @ioc: Pointer to MPT_ADAPTER structure
2209 * @sleepFlag: Specifies whether the process can sleep
2210 * @reason: If recovery, only update facts.
2211 *
2212 * Returns 0 for success, non-zero for failure.
2213 */
2214 static int
2215 GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
2216 {
2217 IOCFacts_t get_facts;
2218 IOCFactsReply_t *facts;
2219 int r;
2220 int req_sz;
2221 int reply_sz;
2222 int sz;
2223 u32 status, vv;
2224 u8 shiftFactor=1;
2225
2226 /* IOC *must* NOT be in RESET state! */
2227 if (ioc->last_state == MPI_IOC_STATE_RESET) {
2228 printk(KERN_ERR MYNAM ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
2229 ioc->name,
2230 ioc->last_state );
2231 return -44;
2232 }
2233
2234 facts = &ioc->facts;
2235
2236 /* Destination (reply area)... */
2237 reply_sz = sizeof(*facts);
2238 memset(facts, 0, reply_sz);
2239
2240 /* Request area (get_facts on the stack right now!) */
2241 req_sz = sizeof(get_facts);
2242 memset(&get_facts, 0, req_sz);
2243
2244 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
2245 /* Assert: All other get_facts fields are zero! */
2246
2247 dinitprintk((MYIOC_s_INFO_FMT
2248 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
2249 ioc->name, req_sz, reply_sz));
2250
2251 /* No non-zero fields in the get_facts request are greater than
2252 * 1 byte in size, so we can just fire it off as is.
2253 */
2254 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
2255 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
2256 if (r != 0)
2257 return r;
2258
2259 /*
2260 * Now byte swap (GRRR) the necessary fields before any further
2261 * inspection of reply contents.
2262 *
2263 * But need to do some sanity checks on MsgLength (byte) field
2264 * to make sure we don't zero IOC's req_sz!
2265 */
2266 /* Did we get a valid reply? */
2267 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
2268 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2269 /*
2270 * If not been here, done that, save off first WhoInit value
2271 */
2272 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
2273 ioc->FirstWhoInit = facts->WhoInit;
2274 }
2275
2276 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
2277 facts->MsgContext = le32_to_cpu(facts->MsgContext);
2278 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
2279 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
2280 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
2281 status = facts->IOCStatus & MPI_IOCSTATUS_MASK;
2282 /* CHECKME! IOCStatus, IOCLogInfo */
2283
2284 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
2285 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
2286
2287 /*
2288 * FC f/w version changed between 1.1 and 1.2
2289 * Old: u16{Major(4),Minor(4),SubMinor(8)}
2290 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
2291 */
2292 if (facts->MsgVersion < 0x0102) {
2293 /*
2294 * Handle old FC f/w style, convert to new...
2295 */
2296 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
2297 facts->FWVersion.Word =
2298 ((oldv<<12) & 0xFF000000) |
2299 ((oldv<<8) & 0x000FFF00);
2300 } else
2301 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
2302
2303 facts->ProductID = le16_to_cpu(facts->ProductID);
2304 facts->CurrentHostMfaHighAddr =
2305 le32_to_cpu(facts->CurrentHostMfaHighAddr);
2306 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
2307 facts->CurrentSenseBufferHighAddr =
2308 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
2309 facts->CurReplyFrameSize =
2310 le16_to_cpu(facts->CurReplyFrameSize);
2311
2312 /*
2313 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
2314 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
2315 * to 14 in MPI-1.01.0x.
2316 */
2317 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
2318 facts->MsgVersion > 0x0100) {
2319 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
2320 }
2321
2322 sz = facts->FWImageSize;
2323 if ( sz & 0x01 )
2324 sz += 1;
2325 if ( sz & 0x02 )
2326 sz += 2;
2327 facts->FWImageSize = sz;
2328
2329 if (!facts->RequestFrameSize) {
2330 /* Something is wrong! */
2331 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
2332 ioc->name);
2333 return -55;
2334 }
2335
2336 r = sz = le32_to_cpu(facts->BlockSize);
2337 vv = ((63 / (sz * 4)) + 1) & 0x03;
2338 ioc->NB_for_64_byte_frame = vv;
2339 while ( sz )
2340 {
2341 shiftFactor++;
2342 sz = sz >> 1;
2343 }
2344 ioc->NBShiftFactor = shiftFactor;
2345 dinitprintk((MYIOC_s_INFO_FMT "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
2346 ioc->name, vv, shiftFactor, r));
2347
2348 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2349 /*
2350 * Set values for this IOC's request & reply frame sizes,
2351 * and request & reply queue depths...
2352 */
2353 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
2354 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
2355 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
2356 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
2357
2358 dinitprintk((MYIOC_s_INFO_FMT "reply_sz=%3d, reply_depth=%4d\n",
2359 ioc->name, ioc->reply_sz, ioc->reply_depth));
2360 dinitprintk((MYIOC_s_INFO_FMT "req_sz =%3d, req_depth =%4d\n",
2361 ioc->name, ioc->req_sz, ioc->req_depth));
2362
2363 /* Get port facts! */
2364 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
2365 return r;
2366 }
2367 } else {
2368 printk(MYIOC_s_ERR_FMT
2369 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
2370 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
2371 RequestFrameSize)/sizeof(u32)));
2372 return -66;
2373 }
2374
2375 return 0;
2376 }
2377
2378 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2379 /*
2380 * GetPortFacts - Send PortFacts request to MPT adapter.
2381 * @ioc: Pointer to MPT_ADAPTER structure
2382 * @portnum: Port number
2383 * @sleepFlag: Specifies whether the process can sleep
2384 *
2385 * Returns 0 for success, non-zero for failure.
2386 */
2387 static int
2388 GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
2389 {
2390 PortFacts_t get_pfacts;
2391 PortFactsReply_t *pfacts;
2392 int ii;
2393 int req_sz;
2394 int reply_sz;
2395
2396 /* IOC *must* NOT be in RESET state! */
2397 if (ioc->last_state == MPI_IOC_STATE_RESET) {
2398 printk(KERN_ERR MYNAM ": ERROR - Can't get PortFacts, %s NOT READY! (%08x)\n",
2399 ioc->name,
2400 ioc->last_state );
2401 return -4;
2402 }
2403
2404 pfacts = &ioc->pfacts[portnum];
2405
2406 /* Destination (reply area)... */
2407 reply_sz = sizeof(*pfacts);
2408 memset(pfacts, 0, reply_sz);
2409
2410 /* Request area (get_pfacts on the stack right now!) */
2411 req_sz = sizeof(get_pfacts);
2412 memset(&get_pfacts, 0, req_sz);
2413
2414 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
2415 get_pfacts.PortNumber = portnum;
2416 /* Assert: All other get_pfacts fields are zero! */
2417
2418 dinitprintk((MYIOC_s_INFO_FMT "Sending get PortFacts(%d) request\n",
2419 ioc->name, portnum));
2420
2421 /* No non-zero fields in the get_pfacts request are greater than
2422 * 1 byte in size, so we can just fire it off as is.
2423 */
2424 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
2425 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
2426 if (ii != 0)
2427 return ii;
2428
2429 /* Did we get a valid reply? */
2430
2431 /* Now byte swap the necessary fields in the response. */
2432 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
2433 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
2434 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
2435 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
2436 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
2437 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
2438 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
2439 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
2440 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
2441
2442 return 0;
2443 }
2444
2445 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2446 /*
2447 * SendIocInit - Send IOCInit request to MPT adapter.
2448 * @ioc: Pointer to MPT_ADAPTER structure
2449 * @sleepFlag: Specifies whether the process can sleep
2450 *
2451 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
2452 *
2453 * Returns 0 for success, non-zero for failure.
2454 */
2455 static int
2456 SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
2457 {
2458 IOCInit_t ioc_init;
2459 MPIDefaultReply_t init_reply;
2460 u32 state;
2461 int r;
2462 int count;
2463 int cntdn;
2464
2465 memset(&ioc_init, 0, sizeof(ioc_init));
2466 memset(&init_reply, 0, sizeof(init_reply));
2467
2468 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
2469 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
2470
2471 /* If we are in a recovery mode and we uploaded the FW image,
2472 * then this pointer is not NULL. Skip the upload a second time.
2473 * Set this flag if cached_fw set for either IOC.
2474 */
2475 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
2476 ioc->upload_fw = 1;
2477 else
2478 ioc->upload_fw = 0;
2479 ddlprintk((MYIOC_s_INFO_FMT "upload_fw %d facts.Flags=%x\n",
2480 ioc->name, ioc->upload_fw, ioc->facts.Flags));
2481
2482 if (ioc->bus_type == FC)
2483 ioc_init.MaxDevices = MPT_MAX_FC_DEVICES;
2484 else
2485 ioc_init.MaxDevices = MPT_MAX_SCSI_DEVICES;
2486
2487 ioc_init.MaxBuses = MPT_MAX_BUS;
2488
2489 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
2490
2491 if (sizeof(dma_addr_t) == sizeof(u64)) {
2492 /* Save the upper 32-bits of the request
2493 * (reply) and sense buffers.
2494 */
2495 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
2496 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
2497 } else {
2498 /* Force 32-bit addressing */
2499 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
2500 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
2501 }
2502
2503 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
2504 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
2505
2506 dhsprintk((MYIOC_s_INFO_FMT "Sending IOCInit (req @ %p)\n",
2507 ioc->name, &ioc_init));
2508
2509 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
2510 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
2511 if (r != 0)
2512 return r;
2513
2514 /* No need to byte swap the multibyte fields in the reply
2515 * since we don't even look at it's contents.
2516 */
2517
2518 dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n",
2519 ioc->name, &ioc_init));
2520
2521 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0)
2522 return r;
2523
2524 /* YIKES! SUPER IMPORTANT!!!
2525 * Poll IocState until _OPERATIONAL while IOC is doing
2526 * LoopInit and TargetDiscovery!
2527 */
2528 count = 0;
2529 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
2530 state = mpt_GetIocState(ioc, 1);
2531 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
2532 if (sleepFlag == CAN_SLEEP) {
2533 msleep_interruptible(1);
2534 } else {
2535 mdelay(1);
2536 }
2537
2538 if (!cntdn) {
2539 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
2540 ioc->name, (int)((count+5)/HZ));
2541 return -9;
2542 }
2543
2544 state = mpt_GetIocState(ioc, 1);
2545 count++;
2546 }
2547 dhsprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n",
2548 ioc->name, count));
2549
2550 return r;
2551 }
2552
2553 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2554 /*
2555 * SendPortEnable - Send PortEnable request to MPT adapter port.
2556 * @ioc: Pointer to MPT_ADAPTER structure
2557 * @portnum: Port number to enable
2558 * @sleepFlag: Specifies whether the process can sleep
2559 *
2560 * Send PortEnable to bring IOC to OPERATIONAL state.
2561 *
2562 * Returns 0 for success, non-zero for failure.
2563 */
2564 static int
2565 SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
2566 {
2567 PortEnable_t port_enable;
2568 MPIDefaultReply_t reply_buf;
2569 int ii;
2570 int req_sz;
2571 int reply_sz;
2572
2573 /* Destination... */
2574 reply_sz = sizeof(MPIDefaultReply_t);
2575 memset(&reply_buf, 0, reply_sz);
2576
2577 req_sz = sizeof(PortEnable_t);
2578 memset(&port_enable, 0, req_sz);
2579
2580 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
2581 port_enable.PortNumber = portnum;
2582 /* port_enable.ChainOffset = 0; */
2583 /* port_enable.MsgFlags = 0; */
2584 /* port_enable.MsgContext = 0; */
2585
2586 dinitprintk((MYIOC_s_INFO_FMT "Sending Port(%d)Enable (req @ %p)\n",
2587 ioc->name, portnum, &port_enable));
2588
2589 /* RAID FW may take a long time to enable
2590 */
2591 if (ioc->bus_type == FC) {
2592 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
2593 reply_sz, (u16*)&reply_buf, 65 /*seconds*/, sleepFlag);
2594 } else {
2595 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
2596 reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag);
2597 }
2598
2599 if (ii != 0)
2600 return ii;
2601
2602 /* We do not even look at the reply, so we need not
2603 * swap the multi-byte fields.
2604 */
2605
2606 return 0;
2607 }
2608
2609 /*
2610 * ioc: Pointer to MPT_ADAPTER structure
2611 * size - total FW bytes
2612 */
2613 void
2614 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
2615 {
2616 if (ioc->cached_fw)
2617 return; /* use already allocated memory */
2618 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2619 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
2620 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
2621 } else {
2622 if ( (ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma) ) )
2623 ioc->alloc_total += size;
2624 }
2625 }
2626 /*
2627 * If alt_img is NULL, delete from ioc structure.
2628 * Else, delete a secondary image in same format.
2629 */
2630 void
2631 mpt_free_fw_memory(MPT_ADAPTER *ioc)
2632 {
2633 int sz;
2634
2635 sz = ioc->facts.FWImageSize;
2636 dinitprintk((KERN_WARNING MYNAM "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
2637 ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
2638 pci_free_consistent(ioc->pcidev, sz,
2639 ioc->cached_fw, ioc->cached_fw_dma);
2640 ioc->cached_fw = NULL;
2641
2642 return;
2643 }
2644
2645
2646 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2647 /*
2648 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
2649 * @ioc: Pointer to MPT_ADAPTER structure
2650 * @sleepFlag: Specifies whether the process can sleep
2651 *
2652 * Returns 0 for success, >0 for handshake failure
2653 * <0 for fw upload failure.
2654 *
2655 * Remark: If bound IOC and a successful FWUpload was performed
2656 * on the bound IOC, the second image is discarded
2657 * and memory is free'd. Both channels must upload to prevent
2658 * IOC from running in degraded mode.
2659 */
2660 static int
2661 mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
2662 {
2663 u8 request[ioc->req_sz];
2664 u8 reply[sizeof(FWUploadReply_t)];
2665 FWUpload_t *prequest;
2666 FWUploadReply_t *preply;
2667 FWUploadTCSGE_t *ptcsge;
2668 int sgeoffset;
2669 u32 flagsLength;
2670 int ii, sz, reply_sz;
2671 int cmdStatus;
2672
2673 /* If the image size is 0, we are done.
2674 */
2675 if ((sz = ioc->facts.FWImageSize) == 0)
2676 return 0;
2677
2678 mpt_alloc_fw_memory(ioc, sz);
2679
2680 dinitprintk((KERN_WARNING MYNAM ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
2681 ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
2682
2683 if (ioc->cached_fw == NULL) {
2684 /* Major Failure.
2685 */
2686 return -ENOMEM;
2687 }
2688
2689 prequest = (FWUpload_t *)&request;
2690 preply = (FWUploadReply_t *)&reply;
2691
2692 /* Destination... */
2693 memset(prequest, 0, ioc->req_sz);
2694
2695 reply_sz = sizeof(reply);
2696 memset(preply, 0, reply_sz);
2697
2698 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
2699 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
2700
2701 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
2702 ptcsge->DetailsLength = 12;
2703 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
2704 ptcsge->ImageSize = cpu_to_le32(sz);
2705
2706 sgeoffset = sizeof(FWUpload_t) - sizeof(SGE_MPI_UNION) + sizeof(FWUploadTCSGE_t);
2707
2708 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
2709 mpt_add_sge(&request[sgeoffset], flagsLength, ioc->cached_fw_dma);
2710
2711 sgeoffset += sizeof(u32) + sizeof(dma_addr_t);
2712 dinitprintk((KERN_WARNING MYNAM "Sending FW Upload (req @ %p) sgeoffset=%d \n",
2713 prequest, sgeoffset));
2714 DBG_DUMP_FW_REQUEST_FRAME(prequest)
2715
2716 ii = mpt_handshake_req_reply_wait(ioc, sgeoffset, (u32*)prequest,
2717 reply_sz, (u16*)preply, 65 /*seconds*/, sleepFlag);
2718
2719 dinitprintk((KERN_WARNING MYNAM "FW Upload completed rc=%x \n", ii));
2720
2721 cmdStatus = -EFAULT;
2722 if (ii == 0) {
2723 /* Handshake transfer was complete and successful.
2724 * Check the Reply Frame.
2725 */
2726 int status, transfer_sz;
2727 status = le16_to_cpu(preply->IOCStatus);
2728 if (status == MPI_IOCSTATUS_SUCCESS) {
2729 transfer_sz = le32_to_cpu(preply->ActualImageSize);
2730 if (transfer_sz == sz)
2731 cmdStatus = 0;
2732 }
2733 }
2734 dinitprintk((MYIOC_s_INFO_FMT ": do_upload status %d \n",
2735 ioc->name, cmdStatus));
2736
2737
2738 if (cmdStatus) {
2739
2740 ddlprintk((MYIOC_s_INFO_FMT ": fw upload failed, freeing image \n",
2741 ioc->name));
2742 mpt_free_fw_memory(ioc);
2743 }
2744
2745 return cmdStatus;
2746 }
2747
2748 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2749 /*
2750 * mpt_downloadboot - DownloadBoot code
2751 * @ioc: Pointer to MPT_ADAPTER structure
2752 * @flag: Specify which part of IOC memory is to be uploaded.
2753 * @sleepFlag: Specifies whether the process can sleep
2754 *
2755 * FwDownloadBoot requires Programmed IO access.
2756 *
2757 * Returns 0 for success
2758 * -1 FW Image size is 0
2759 * -2 No valid cached_fw Pointer
2760 * <0 for fw upload failure.
2761 */
2762 static int
2763 mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag)
2764 {
2765 MpiFwHeader_t *pFwHeader;
2766 MpiExtImageHeader_t *pExtImage;
2767 u32 fwSize;
2768 u32 diag0val;
2769 int count;
2770 u32 *ptrFw;
2771 u32 diagRwData;
2772 u32 nextImage;
2773 u32 load_addr;
2774 u32 ioc_state=0;
2775
2776 ddlprintk((MYIOC_s_INFO_FMT "downloadboot: fw size 0x%x, ioc FW Ptr %p\n",
2777 ioc->name, ioc->facts.FWImageSize, ioc->cached_fw));
2778
2779 if ( ioc->facts.FWImageSize == 0 )
2780 return -1;
2781
2782 if (ioc->cached_fw == NULL)
2783 return -2;
2784
2785 /* prevent a second downloadboot and memory free with alt_ioc */
2786 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
2787 ioc->alt_ioc->cached_fw = NULL;
2788
2789 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
2790 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
2791 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
2792 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
2793 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
2794 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
2795
2796 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
2797
2798 /* wait 1 msec */
2799 if (sleepFlag == CAN_SLEEP) {
2800 msleep_interruptible(1);
2801 } else {
2802 mdelay (1);
2803 }
2804
2805 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
2806 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
2807
2808 for (count = 0; count < 30; count ++) {
2809 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
2810 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
2811 ddlprintk((MYIOC_s_INFO_FMT "RESET_ADAPTER cleared, count=%d\n",
2812 ioc->name, count));
2813 break;
2814 }
2815 /* wait 1 sec */
2816 if (sleepFlag == CAN_SLEEP) {
2817 msleep_interruptible (1000);
2818 } else {
2819 mdelay (1000);
2820 }
2821 }
2822
2823 if ( count == 30 ) {
2824 ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! Unable to RESET_ADAPTER diag0val=%x\n",
2825 ioc->name, diag0val));
2826 return -3;
2827 }
2828
2829 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
2830 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
2831 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
2832 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
2833 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
2834 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
2835
2836 /* Set the DiagRwEn and Disable ARM bits */
2837 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
2838
2839 pFwHeader = (MpiFwHeader_t *) ioc->cached_fw;
2840 fwSize = (pFwHeader->ImageSize + 3)/4;
2841 ptrFw = (u32 *) pFwHeader;
2842
2843 /* Write the LoadStartAddress to the DiagRw Address Register
2844 * using Programmed IO
2845 */
2846 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
2847 ddlprintk((MYIOC_s_INFO_FMT "LoadStart addr written 0x%x \n",
2848 ioc->name, pFwHeader->LoadStartAddress));
2849
2850 ddlprintk((MYIOC_s_INFO_FMT "Write FW Image: 0x%x bytes @ %p\n",
2851 ioc->name, fwSize*4, ptrFw));
2852 while (fwSize--) {
2853 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
2854 }
2855
2856 nextImage = pFwHeader->NextImageHeaderOffset;
2857 while (nextImage) {
2858 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
2859
2860 load_addr = pExtImage->LoadStartAddress;
2861
2862 fwSize = (pExtImage->ImageSize + 3) >> 2;
2863 ptrFw = (u32 *)pExtImage;
2864
2865 ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image: 0x%x bytes @ %p load_addr=%x\n",
2866 ioc->name, fwSize*4, ptrFw, load_addr));
2867 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
2868
2869 while (fwSize--) {
2870 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
2871 }
2872 nextImage = pExtImage->NextImageHeaderOffset;
2873 }
2874
2875 /* Write the IopResetVectorRegAddr */
2876 ddlprintk((MYIOC_s_INFO_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
2877 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
2878
2879 /* Write the IopResetVectorValue */
2880 ddlprintk((MYIOC_s_INFO_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
2881 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
2882
2883 /* Clear the internal flash bad bit - autoincrementing register,
2884 * so must do two writes.
2885 */
2886 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
2887 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
2888 diagRwData |= 0x4000000;
2889 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
2890 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
2891
2892 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
2893 ddlprintk((MYIOC_s_INFO_FMT "downloadboot diag0val=%x, turning off PREVENT_IOC_BOOT, DISABLE_ARM\n",
2894 ioc->name, diag0val));
2895 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM);
2896 ddlprintk((MYIOC_s_INFO_FMT "downloadboot now diag0val=%x\n",
2897 ioc->name, diag0val));
2898 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
2899
2900 /* Write 0xFF to reset the sequencer */
2901 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
2902
2903 for (count=0; count<HZ*20; count++) {
2904 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
2905 ddlprintk((MYIOC_s_INFO_FMT "downloadboot successful! (count=%d) IocState=%x\n",
2906 ioc->name, count, ioc_state));
2907 if ((SendIocInit(ioc, sleepFlag)) != 0) {
2908 ddlprintk((MYIOC_s_INFO_FMT "downloadboot: SendIocInit failed\n",
2909 ioc->name));
2910 return -EFAULT;
2911 }
2912 ddlprintk((MYIOC_s_INFO_FMT "downloadboot: SendIocInit successful\n",
2913 ioc->name));
2914 return 0;
2915 }
2916 if (sleepFlag == CAN_SLEEP) {
2917 msleep_interruptible (10);
2918 } else {
2919 mdelay (10);
2920 }
2921 }
2922 ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! IocState=%x\n",
2923 ioc->name, ioc_state));
2924 return -EFAULT;
2925 }
2926
2927 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2928 /*
2929 * KickStart - Perform hard reset of MPT adapter.
2930 * @ioc: Pointer to MPT_ADAPTER structure
2931 * @force: Force hard reset
2932 * @sleepFlag: Specifies whether the process can sleep
2933 *
2934 * This routine places MPT adapter in diagnostic mode via the
2935 * WriteSequence register, and then performs a hard reset of adapter
2936 * via the Diagnostic register.
2937 *
2938 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
2939 * or NO_SLEEP (interrupt thread, use mdelay)
2940 * force - 1 if doorbell active, board fault state
2941 * board operational, IOC_RECOVERY or
2942 * IOC_BRINGUP and there is an alt_ioc.
2943 * 0 else
2944 *
2945 * Returns:
2946 * 1 - hard reset, READY
2947 * 0 - no reset due to History bit, READY
2948 * -1 - no reset due to History bit but not READY
2949 * OR reset but failed to come READY
2950 * -2 - no reset, could not enter DIAG mode
2951 * -3 - reset but bad FW bit
2952 */
2953 static int
2954 KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
2955 {
2956 int hard_reset_done = 0;
2957 u32 ioc_state=0;
2958 int cnt,cntdn;
2959
2960 dinitprintk((KERN_WARNING MYNAM ": KickStarting %s!\n", ioc->name));
2961 if (ioc->bus_type == SCSI) {
2962 /* Always issue a Msg Unit Reset first. This will clear some
2963 * SCSI bus hang conditions.
2964 */
2965 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
2966
2967 if (sleepFlag == CAN_SLEEP) {
2968 msleep_interruptible (1000);
2969 } else {
2970 mdelay (1000);
2971 }
2972 }
2973
2974 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
2975 if (hard_reset_done < 0)
2976 return hard_reset_done;
2977
2978 dinitprintk((MYIOC_s_INFO_FMT "Diagnostic reset successful!\n",
2979 ioc->name));
2980
2981 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
2982 for (cnt=0; cnt<cntdn; cnt++) {
2983 ioc_state = mpt_GetIocState(ioc, 1);
2984 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
2985 dinitprintk((MYIOC_s_INFO_FMT "KickStart successful! (cnt=%d)\n",
2986 ioc->name, cnt));
2987 return hard_reset_done;
2988 }
2989 if (sleepFlag == CAN_SLEEP) {
2990 msleep_interruptible (10);
2991 } else {
2992 mdelay (10);
2993 }
2994 }
2995
2996 printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
2997 ioc->name, ioc_state);
2998 return -1;
2999 }
3000
3001 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3002 /*
3003 * mpt_diag_reset - Perform hard reset of the adapter.
3004 * @ioc: Pointer to MPT_ADAPTER structure
3005 * @ignore: Set if to honor and clear to ignore
3006 * the reset history bit
3007 * @sleepflag: CAN_SLEEP if called in a non-interrupt thread,
3008 * else set to NO_SLEEP (use mdelay instead)
3009 *
3010 * This routine places the adapter in diagnostic mode via the
3011 * WriteSequence register and then performs a hard reset of adapter
3012 * via the Diagnostic register. Adapter should be in ready state
3013 * upon successful completion.
3014 *
3015 * Returns: 1 hard reset successful
3016 * 0 no reset performed because reset history bit set
3017 * -2 enabling diagnostic mode failed
3018 * -3 diagnostic reset failed
3019 */
3020 static int
3021 mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3022 {
3023 u32 diag0val;
3024 u32 doorbell;
3025 int hard_reset_done = 0;
3026 int count = 0;
3027 #ifdef MPT_DEBUG
3028 u32 diag1val = 0;
3029 #endif
3030
3031 /* Clear any existing interrupts */
3032 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3033
3034 /* Use "Diagnostic reset" method! (only thing available!) */
3035 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3036
3037 #ifdef MPT_DEBUG
3038 if (ioc->alt_ioc)
3039 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
3040 dprintk((MYIOC_s_INFO_FMT "DbG1: diag0=%08x, diag1=%08x\n",
3041 ioc->name, diag0val, diag1val));
3042 #endif
3043
3044 /* Do the reset if we are told to ignore the reset history
3045 * or if the reset history is 0
3046 */
3047 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
3048 while ((diag0val & MPI_DIAG_DRWE) == 0) {
3049 /* Write magic sequence to WriteSequence register
3050 * Loop until in diagnostic mode
3051 */
3052 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3053 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3054 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3055 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3056 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3057 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3058
3059 /* wait 100 msec */
3060 if (sleepFlag == CAN_SLEEP) {
3061 msleep_interruptible (100);
3062 } else {
3063 mdelay (100);
3064 }
3065
3066 count++;
3067 if (count > 20) {
3068 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
3069 ioc->name, diag0val);
3070 return -2;
3071
3072 }
3073
3074 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3075
3076 dprintk((MYIOC_s_INFO_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
3077 ioc->name, diag0val));
3078 }
3079
3080 #ifdef MPT_DEBUG
3081 if (ioc->alt_ioc)
3082 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
3083 dprintk((MYIOC_s_INFO_FMT "DbG2: diag0=%08x, diag1=%08x\n",
3084 ioc->name, diag0val, diag1val));
3085 #endif
3086 /*
3087 * Disable the ARM (Bug fix)
3088 *
3089 */
3090 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
3091 mdelay (1);
3092
3093 /*
3094 * Now hit the reset bit in the Diagnostic register
3095 * (THE BIG HAMMER!) (Clears DRWE bit).
3096 */
3097 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3098 hard_reset_done = 1;
3099 dprintk((MYIOC_s_INFO_FMT "Diagnostic reset performed\n",
3100 ioc->name));
3101
3102 /*
3103 * Call each currently registered protocol IOC reset handler
3104 * with pre-reset indication.
3105 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3106 * MptResetHandlers[] registered yet.
3107 */
3108 {
3109 int ii;
3110 int r = 0;
3111
3112 for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
3113 if (MptResetHandlers[ii]) {
3114 dprintk((MYIOC_s_INFO_FMT "Calling IOC pre_reset handler #%d\n",
3115 ioc->name, ii));
3116 r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_PRE_RESET);
3117 if (ioc->alt_ioc) {
3118 dprintk((MYIOC_s_INFO_FMT "Calling alt-%s pre_reset handler #%d\n",
3119 ioc->name, ioc->alt_ioc->name, ii));
3120 r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_PRE_RESET);
3121 }
3122 }
3123 }
3124 /* FIXME? Examine results here? */
3125 }
3126
3127 if (ioc->cached_fw) {
3128 /* If the DownloadBoot operation fails, the
3129 * IOC will be left unusable. This is a fatal error
3130 * case. _diag_reset will return < 0
3131 */
3132 for (count = 0; count < 30; count ++) {
3133 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3134 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3135 break;
3136 }
3137
3138 /* wait 1 sec */
3139 if (sleepFlag == CAN_SLEEP) {
3140 ssleep(1);
3141 } else {
3142 mdelay (1000);
3143 }
3144 }
3145 if ((count = mpt_downloadboot(ioc, sleepFlag)) < 0) {
3146 printk(KERN_WARNING MYNAM
3147 ": firmware downloadboot failure (%d)!\n", count);
3148 }
3149
3150 } else {
3151 /* Wait for FW to reload and for board
3152 * to go to the READY state.
3153 * Maximum wait is 60 seconds.
3154 * If fail, no error will check again
3155 * with calling program.
3156 */
3157 for (count = 0; count < 60; count ++) {
3158 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
3159 doorbell &= MPI_IOC_STATE_MASK;
3160
3161 if (doorbell == MPI_IOC_STATE_READY) {
3162 break;
3163 }
3164
3165 /* wait 1 sec */
3166 if (sleepFlag == CAN_SLEEP) {
3167 msleep_interruptible (1000);
3168 } else {
3169 mdelay (1000);
3170 }
3171 }
3172 }
3173 }
3174
3175 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3176 #ifdef MPT_DEBUG
3177 if (ioc->alt_ioc)
3178 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
3179 dprintk((MYIOC_s_INFO_FMT "DbG3: diag0=%08x, diag1=%08x\n",
3180 ioc->name, diag0val, diag1val));
3181 #endif
3182
3183 /* Clear RESET_HISTORY bit! Place board in the
3184 * diagnostic mode to update the diag register.
3185 */
3186 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3187 count = 0;
3188 while ((diag0val & MPI_DIAG_DRWE) == 0) {
3189 /* Write magic sequence to WriteSequence register
3190 * Loop until in diagnostic mode
3191 */
3192 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3193 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3194 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3195 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3196 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3197 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3198
3199 /* wait 100 msec */
3200 if (sleepFlag == CAN_SLEEP) {
3201 msleep_interruptible (100);
3202 } else {
3203 mdelay (100);
3204 }
3205
3206 count++;
3207 if (count > 20) {
3208 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
3209 ioc->name, diag0val);
3210 break;
3211 }
3212 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3213 }
3214 diag0val &= ~MPI_DIAG_RESET_HISTORY;
3215 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3216 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3217 if (diag0val & MPI_DIAG_RESET_HISTORY) {
3218 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
3219 ioc->name);
3220 }
3221
3222 /* Disable Diagnostic Mode
3223 */
3224 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
3225
3226 /* Check FW reload status flags.
3227 */
3228 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3229 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
3230 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
3231 ioc->name, diag0val);
3232 return -3;
3233 }
3234
3235 #ifdef MPT_DEBUG
3236 if (ioc->alt_ioc)
3237 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
3238 dprintk((MYIOC_s_INFO_FMT "DbG4: diag0=%08x, diag1=%08x\n",
3239 ioc->name, diag0val, diag1val));
3240 #endif
3241
3242 /*
3243 * Reset flag that says we've enabled event notification
3244 */
3245 ioc->facts.EventState = 0;
3246
3247 if (ioc->alt_ioc)
3248 ioc->alt_ioc->facts.EventState = 0;
3249
3250 return hard_reset_done;
3251 }
3252
3253 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3254 /*
3255 * SendIocReset - Send IOCReset request to MPT adapter.
3256 * @ioc: Pointer to MPT_ADAPTER structure
3257 * @reset_type: reset type, expected values are
3258 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
3259 *
3260 * Send IOCReset request to the MPT adapter.
3261 *
3262 * Returns 0 for success, non-zero for failure.
3263 */
3264 static int
3265 SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
3266 {
3267 int r;
3268 u32 state;
3269 int cntdn, count;
3270
3271 drsprintk((KERN_WARNING MYNAM ": %s: Sending IOC reset(0x%02x)!\n",
3272 ioc->name, reset_type));
3273 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
3274 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
3275 return r;
3276
3277 /* FW ACK'd request, wait for READY state
3278 */
3279 count = 0;
3280 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
3281
3282 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
3283 cntdn--;
3284 count++;
3285 if (!cntdn) {
3286 if (sleepFlag != CAN_SLEEP)
3287 count *= 10;
3288
3289 printk(KERN_ERR MYNAM ": %s: ERROR - Wait IOC_READY state timeout(%d)!\n",
3290 ioc->name, (int)((count+5)/HZ));
3291 return -ETIME;
3292 }
3293
3294 if (sleepFlag == CAN_SLEEP) {
3295 msleep_interruptible(1);
3296 } else {
3297 mdelay (1); /* 1 msec delay */
3298 }
3299 }
3300
3301 /* TODO!
3302 * Cleanup all event stuff for this IOC; re-issue EventNotification
3303 * request if needed.
3304 */
3305 if (ioc->facts.Function)
3306 ioc->facts.EventState = 0;
3307
3308 return 0;
3309 }
3310
3311 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3312 /*
3313 * initChainBuffers - Allocate memory for and initialize
3314 * chain buffers, chain buffer control arrays and spinlock.
3315 * @hd: Pointer to MPT_SCSI_HOST structure
3316 * @init: If set, initialize the spin lock.
3317 */
3318 static int
3319 initChainBuffers(MPT_ADAPTER *ioc)
3320 {
3321 u8 *mem;
3322 int sz, ii, num_chain;
3323 int scale, num_sge, numSGE;
3324
3325 /* ReqToChain size must equal the req_depth
3326 * index = req_idx
3327 */
3328 if (ioc->ReqToChain == NULL) {
3329 sz = ioc->req_depth * sizeof(int);
3330 mem = kmalloc(sz, GFP_ATOMIC);
3331 if (mem == NULL)
3332 return -1;
3333
3334 ioc->ReqToChain = (int *) mem;
3335 dinitprintk((KERN_INFO MYNAM ": %s ReqToChain alloc @ %p, sz=%d bytes\n",
3336 ioc->name, mem, sz));
3337 mem = kmalloc(sz, GFP_ATOMIC);
3338 if (mem == NULL)
3339 return -1;
3340
3341 ioc->RequestNB = (int *) mem;
3342 dinitprintk((KERN_INFO MYNAM ": %s RequestNB alloc @ %p, sz=%d bytes\n",
3343 ioc->name, mem, sz));
3344 }
3345 for (ii = 0; ii < ioc->req_depth; ii++) {
3346 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
3347 }
3348
3349 /* ChainToChain size must equal the total number
3350 * of chain buffers to be allocated.
3351 * index = chain_idx
3352 *
3353 * Calculate the number of chain buffers needed(plus 1) per I/O
3354 * then multiply the the maximum number of simultaneous cmds
3355 *
3356 * num_sge = num sge in request frame + last chain buffer
3357 * scale = num sge per chain buffer if no chain element
3358 */
3359 scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
3360 if (sizeof(dma_addr_t) == sizeof(u64))
3361 num_sge = scale + (ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
3362 else
3363 num_sge = 1+ scale + (ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
3364
3365 if (sizeof(dma_addr_t) == sizeof(u64)) {
3366 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
3367 (ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
3368 } else {
3369 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
3370 (ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
3371 }
3372 dinitprintk((KERN_INFO MYNAM ": %s num_sge=%d numSGE=%d\n",
3373 ioc->name, num_sge, numSGE));
3374
3375 if ( numSGE > MPT_SCSI_SG_DEPTH )
3376 numSGE = MPT_SCSI_SG_DEPTH;
3377
3378 num_chain = 1;
3379 while (numSGE - num_sge > 0) {
3380 num_chain++;
3381 num_sge += (scale - 1);
3382 }
3383 num_chain++;
3384
3385 dinitprintk((KERN_INFO MYNAM ": %s Now numSGE=%d num_sge=%d num_chain=%d\n",
3386 ioc->name, numSGE, num_sge, num_chain));
3387
3388 if (ioc->bus_type == SCSI)
3389 num_chain *= MPT_SCSI_CAN_QUEUE;
3390 else
3391 num_chain *= MPT_FC_CAN_QUEUE;
3392
3393 ioc->num_chain = num_chain;
3394
3395 sz = num_chain * sizeof(int);
3396 if (ioc->ChainToChain == NULL) {
3397 mem = kmalloc(sz, GFP_ATOMIC);
3398 if (mem == NULL)
3399 return -1;
3400
3401 ioc->ChainToChain = (int *) mem;
3402 dinitprintk((KERN_INFO MYNAM ": %s ChainToChain alloc @ %p, sz=%d bytes\n",
3403 ioc->name, mem, sz));
3404 } else {
3405 mem = (u8 *) ioc->ChainToChain;
3406 }
3407 memset(mem, 0xFF, sz);
3408 return num_chain;
3409 }
3410
3411 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3412 /*
3413 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
3414 * @ioc: Pointer to MPT_ADAPTER structure
3415 *
3416 * This routine allocates memory for the MPT reply and request frame
3417 * pools (if necessary), and primes the IOC reply FIFO with
3418 * reply frames.
3419 *
3420 * Returns 0 for success, non-zero for failure.
3421 */
3422 static int
3423 PrimeIocFifos(MPT_ADAPTER *ioc)
3424 {
3425 MPT_FRAME_HDR *mf;
3426 unsigned long flags;
3427 dma_addr_t alloc_dma;
3428 u8 *mem;
3429 int i, reply_sz, sz, total_size, num_chain;
3430
3431 /* Prime reply FIFO... */
3432
3433 if (ioc->reply_frames == NULL) {
3434 if ( (num_chain = initChainBuffers(ioc)) < 0)
3435 return -1;
3436
3437 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
3438 dinitprintk((KERN_INFO MYNAM ": %s.ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
3439 ioc->name, ioc->reply_sz, ioc->reply_depth));
3440 dinitprintk((KERN_INFO MYNAM ": %s.ReplyBuffer sz=%d[%x] bytes\n",
3441 ioc->name, reply_sz, reply_sz));
3442
3443 sz = (ioc->req_sz * ioc->req_depth);
3444 dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffer sz=%d bytes, RequestDepth=%d\n",
3445 ioc->name, ioc->req_sz, ioc->req_depth));
3446 dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffer sz=%d[%x] bytes\n",
3447 ioc->name, sz, sz));
3448 total_size += sz;
3449
3450 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
3451 dinitprintk((KERN_INFO MYNAM ": %s.ChainBuffer sz=%d bytes, ChainDepth=%d\n",
3452 ioc->name, ioc->req_sz, num_chain));
3453 dinitprintk((KERN_INFO MYNAM ": %s.ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
3454 ioc->name, sz, sz, num_chain));
3455
3456 total_size += sz;
3457 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
3458 if (mem == NULL) {
3459 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
3460 ioc->name);
3461 goto out_fail;
3462 }
3463
3464 dinitprintk((KERN_INFO MYNAM ": %s.Total alloc @ %p[%p], sz=%d[%x] bytes\n",
3465 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
3466
3467 memset(mem, 0, total_size);
3468 ioc->alloc_total += total_size;
3469 ioc->alloc = mem;
3470 ioc->alloc_dma = alloc_dma;
3471 ioc->alloc_sz = total_size;
3472 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
3473 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
3474
3475 alloc_dma += reply_sz;
3476 mem += reply_sz;
3477
3478 /* Request FIFO - WE manage this! */
3479
3480 ioc->req_frames = (MPT_FRAME_HDR *) mem;
3481 ioc->req_frames_dma = alloc_dma;
3482
3483 dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffers @ %p[%p]\n",
3484 ioc->name, mem, (void *)(ulong)alloc_dma));
3485
3486 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
3487
3488 #if defined(CONFIG_MTRR) && 0
3489 /*
3490 * Enable Write Combining MTRR for IOC's memory region.
3491 * (at least as much as we can; "size and base must be
3492 * multiples of 4 kiB"
3493 */
3494 ioc->mtrr_reg = mtrr_add(ioc->req_frames_dma,
3495 sz,
3496 MTRR_TYPE_WRCOMB, 1);
3497 dprintk((MYIOC_s_INFO_FMT "MTRR region registered (base:size=%08x:%x)\n",
3498 ioc->name, ioc->req_frames_dma, sz));
3499 #endif
3500
3501 for (i = 0; i < ioc->req_depth; i++) {
3502 alloc_dma += ioc->req_sz;
3503 mem += ioc->req_sz;
3504 }
3505
3506 ioc->ChainBuffer = mem;
3507 ioc->ChainBufferDMA = alloc_dma;
3508
3509 dinitprintk((KERN_INFO MYNAM " :%s.ChainBuffers @ %p(%p)\n",
3510 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
3511
3512 /* Initialize the free chain Q.
3513 */
3514
3515 INIT_LIST_HEAD(&ioc->FreeChainQ);
3516
3517 /* Post the chain buffers to the FreeChainQ.
3518 */
3519 mem = (u8 *)ioc->ChainBuffer;
3520 for (i=0; i < num_chain; i++) {
3521 mf = (MPT_FRAME_HDR *) mem;
3522 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
3523 mem += ioc->req_sz;
3524 }
3525
3526 /* Initialize Request frames linked list
3527 */
3528 alloc_dma = ioc->req_frames_dma;
3529 mem = (u8 *) ioc->req_frames;
3530
3531 spin_lock_irqsave(&ioc->FreeQlock, flags);
3532 INIT_LIST_HEAD(&ioc->FreeQ);
3533 for (i = 0; i < ioc->req_depth; i++) {
3534 mf = (MPT_FRAME_HDR *) mem;
3535
3536 /* Queue REQUESTs *internally*! */
3537 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
3538
3539 mem += ioc->req_sz;
3540 }
3541 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
3542
3543 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
3544 ioc->sense_buf_pool =
3545 pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
3546 if (ioc->sense_buf_pool == NULL) {
3547 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
3548 ioc->name);
3549 goto out_fail;
3550 }
3551
3552 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
3553 ioc->alloc_total += sz;
3554 dinitprintk((KERN_INFO MYNAM ": %s.SenseBuffers @ %p[%p]\n",
3555 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
3556
3557 }
3558
3559 /* Post Reply frames to FIFO
3560 */
3561 alloc_dma = ioc->alloc_dma;
3562 dinitprintk((KERN_INFO MYNAM ": %s.ReplyBuffers @ %p[%p]\n",
3563 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
3564
3565 for (i = 0; i < ioc->reply_depth; i++) {
3566 /* Write each address to the IOC! */
3567 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
3568 alloc_dma += ioc->reply_sz;
3569 }
3570
3571 return 0;
3572
3573 out_fail:
3574 if (ioc->alloc != NULL) {
3575 sz = ioc->alloc_sz;
3576 pci_free_consistent(ioc->pcidev,
3577 sz,
3578 ioc->alloc, ioc->alloc_dma);
3579 ioc->reply_frames = NULL;
3580 ioc->req_frames = NULL;
3581 ioc->alloc_total -= sz;
3582 }
3583 if (ioc->sense_buf_pool != NULL) {
3584 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
3585 pci_free_consistent(ioc->pcidev,
3586 sz,
3587 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
3588 ioc->sense_buf_pool = NULL;
3589 }
3590 return -1;
3591 }
3592
3593 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3594 /**
3595 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
3596 * from IOC via doorbell handshake method.
3597 * @ioc: Pointer to MPT_ADAPTER structure
3598 * @reqBytes: Size of the request in bytes
3599 * @req: Pointer to MPT request frame
3600 * @replyBytes: Expected size of the reply in bytes
3601 * @u16reply: Pointer to area where reply should be written
3602 * @maxwait: Max wait time for a reply (in seconds)
3603 * @sleepFlag: Specifies whether the process can sleep
3604 *
3605 * NOTES: It is the callers responsibility to byte-swap fields in the
3606 * request which are greater than 1 byte in size. It is also the
3607 * callers responsibility to byte-swap response fields which are
3608 * greater than 1 byte in size.
3609 *
3610 * Returns 0 for success, non-zero for failure.
3611 */
3612 static int
3613 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
3614 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
3615 {
3616 MPIDefaultReply_t *mptReply;
3617 int failcnt = 0;
3618 int t;
3619
3620 /*
3621 * Get ready to cache a handshake reply
3622 */
3623 ioc->hs_reply_idx = 0;
3624 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
3625 mptReply->MsgLength = 0;
3626
3627 /*
3628 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
3629 * then tell IOC that we want to handshake a request of N words.
3630 * (WRITE u32val to Doorbell reg).
3631 */
3632 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3633 CHIPREG_WRITE32(&ioc->chip->Doorbell,
3634 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
3635 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
3636
3637 /*
3638 * Wait for IOC's doorbell handshake int
3639 */
3640 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
3641 failcnt++;
3642
3643 dhsprintk((MYIOC_s_INFO_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
3644 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
3645
3646 /* Read doorbell and check for active bit */
3647 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
3648 return -1;
3649
3650 /*
3651 * Clear doorbell int (WRITE 0 to IntStatus reg),
3652 * then wait for IOC to ACKnowledge that it's ready for
3653 * our handshake request.
3654 */
3655 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3656 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
3657 failcnt++;
3658
3659 if (!failcnt) {
3660 int ii;
3661 u8 *req_as_bytes = (u8 *) req;
3662
3663 /*
3664 * Stuff request words via doorbell handshake,
3665 * with ACK from IOC for each.
3666 */
3667 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
3668 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
3669 (req_as_bytes[(ii*4) + 1] << 8) |
3670 (req_as_bytes[(ii*4) + 2] << 16) |
3671 (req_as_bytes[(ii*4) + 3] << 24));
3672
3673 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
3674 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
3675 failcnt++;
3676 }
3677
3678 dhsprintk((KERN_INFO MYNAM ": Handshake request frame (@%p) header\n", req));
3679 DBG_DUMP_REQUEST_FRAME_HDR(req)
3680
3681 dhsprintk((MYIOC_s_INFO_FMT "HandShake request post done, WaitCnt=%d%s\n",
3682 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
3683
3684 /*
3685 * Wait for completion of doorbell handshake reply from the IOC
3686 */
3687 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
3688 failcnt++;
3689
3690 dhsprintk((MYIOC_s_INFO_FMT "HandShake reply count=%d%s\n",
3691 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
3692
3693 /*
3694 * Copy out the cached reply...
3695 */
3696 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
3697 u16reply[ii] = ioc->hs_reply[ii];
3698 } else {
3699 return -99;
3700 }
3701
3702 return -failcnt;
3703 }
3704
3705 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3706 /*
3707 * WaitForDoorbellAck - Wait for IOC to clear the IOP_DOORBELL_STATUS bit
3708 * in it's IntStatus register.
3709 * @ioc: Pointer to MPT_ADAPTER structure
3710 * @howlong: How long to wait (in seconds)
3711 * @sleepFlag: Specifies whether the process can sleep
3712 *
3713 * This routine waits (up to ~2 seconds max) for IOC doorbell
3714 * handshake ACKnowledge.
3715 *
3716 * Returns a negative value on failure, else wait loop count.
3717 */
3718 static int
3719 WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
3720 {
3721 int cntdn;
3722 int count = 0;
3723 u32 intstat=0;
3724
3725 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong;
3726
3727 if (sleepFlag == CAN_SLEEP) {
3728 while (--cntdn) {
3729 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
3730 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
3731 break;
3732 msleep_interruptible (1);
3733 count++;
3734 }
3735 } else {
3736 while (--cntdn) {
3737 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
3738 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
3739 break;
3740 mdelay (1);
3741 count++;
3742 }
3743 }
3744
3745 if (cntdn) {
3746 dprintk((MYIOC_s_INFO_FMT "WaitForDoorbell ACK (count=%d)\n",
3747 ioc->name, count));
3748 return count;
3749 }
3750
3751 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
3752 ioc->name, count, intstat);
3753 return -1;
3754 }
3755
3756 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3757 /*
3758 * WaitForDoorbellInt - Wait for IOC to set the HIS_DOORBELL_INTERRUPT bit
3759 * in it's IntStatus register.
3760 * @ioc: Pointer to MPT_ADAPTER structure
3761 * @howlong: How long to wait (in seconds)
3762 * @sleepFlag: Specifies whether the process can sleep
3763 *
3764 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt.
3765 *
3766 * Returns a negative value on failure, else wait loop count.
3767 */
3768 static int
3769 WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
3770 {
3771 int cntdn;
3772 int count = 0;
3773 u32 intstat=0;
3774
3775 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong;
3776 if (sleepFlag == CAN_SLEEP) {
3777 while (--cntdn) {
3778 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
3779 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
3780 break;
3781 msleep_interruptible(1);
3782 count++;
3783 }
3784 } else {
3785 while (--cntdn) {
3786 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
3787 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
3788 break;
3789 mdelay(1);
3790 count++;
3791 }
3792 }
3793
3794 if (cntdn) {
3795 dprintk((MYIOC_s_INFO_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
3796 ioc->name, count, howlong));
3797 return count;
3798 }
3799
3800 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
3801 ioc->name, count, intstat);
3802 return -1;
3803 }
3804
3805 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3806 /*
3807 * WaitForDoorbellReply - Wait for and capture a IOC handshake reply.
3808 * @ioc: Pointer to MPT_ADAPTER structure
3809 * @howlong: How long to wait (in seconds)
3810 * @sleepFlag: Specifies whether the process can sleep
3811 *
3812 * This routine polls the IOC for a handshake reply, 16 bits at a time.
3813 * Reply is cached to IOC private area large enough to hold a maximum
3814 * of 128 bytes of reply data.
3815 *
3816 * Returns a negative value on failure, else size of reply in WORDS.
3817 */
3818 static int
3819 WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
3820 {
3821 int u16cnt = 0;
3822 int failcnt = 0;
3823 int t;
3824 u16 *hs_reply = ioc->hs_reply;
3825 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
3826 u16 hword;
3827
3828 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
3829
3830 /*
3831 * Get first two u16's so we can look at IOC's intended reply MsgLength
3832 */
3833 u16cnt=0;
3834 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
3835 failcnt++;
3836 } else {
3837 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
3838 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3839 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
3840 failcnt++;
3841 else {
3842 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
3843 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3844 }
3845 }
3846
3847 dhsprintk((MYIOC_s_INFO_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
3848 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
3849 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
3850
3851 /*
3852 * If no error (and IOC said MsgLength is > 0), piece together
3853 * reply 16 bits at a time.
3854 */
3855 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
3856 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
3857 failcnt++;
3858 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
3859 /* don't overflow our IOC hs_reply[] buffer! */
3860 if (u16cnt < sizeof(ioc->hs_reply) / sizeof(ioc->hs_reply[0]))
3861 hs_reply[u16cnt] = hword;
3862 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3863 }
3864
3865 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
3866 failcnt++;
3867 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3868
3869 if (failcnt) {
3870 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
3871 ioc->name);
3872 return -failcnt;
3873 }
3874 #if 0
3875 else if (u16cnt != (2 * mptReply->MsgLength)) {
3876 return -101;
3877 }
3878 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
3879 return -102;
3880 }
3881 #endif
3882
3883 dhsprintk((MYIOC_s_INFO_FMT "Got Handshake reply:\n", ioc->name));
3884 DBG_DUMP_REPLY_FRAME(mptReply)
3885
3886 dhsprintk((MYIOC_s_INFO_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
3887 ioc->name, t, u16cnt/2));
3888 return u16cnt/2;
3889 }
3890
3891 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3892 /*
3893 * GetLanConfigPages - Fetch LANConfig pages.
3894 * @ioc: Pointer to MPT_ADAPTER structure
3895 *
3896 * Return: 0 for success
3897 * -ENOMEM if no memory available
3898 * -EPERM if not allowed due to ISR context
3899 * -EAGAIN if no msg frames currently available
3900 * -EFAULT for non-successful reply or no reply (timeout)
3901 */
3902 static int
3903 GetLanConfigPages(MPT_ADAPTER *ioc)
3904 {
3905 ConfigPageHeader_t hdr;
3906 CONFIGPARMS cfg;
3907 LANPage0_t *ppage0_alloc;
3908 dma_addr_t page0_dma;
3909 LANPage1_t *ppage1_alloc;
3910 dma_addr_t page1_dma;
3911 int rc = 0;
3912 int data_sz;
3913 int copy_sz;
3914
3915 /* Get LAN Page 0 header */
3916 hdr.PageVersion = 0;
3917 hdr.PageLength = 0;
3918 hdr.PageNumber = 0;
3919 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
3920 cfg.hdr = &hdr;
3921 cfg.physAddr = -1;
3922 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
3923 cfg.dir = 0;
3924 cfg.pageAddr = 0;
3925 cfg.timeout = 0;
3926
3927 if ((rc = mpt_config(ioc, &cfg)) != 0)
3928 return rc;
3929
3930 if (hdr.PageLength > 0) {
3931 data_sz = hdr.PageLength * 4;
3932 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
3933 rc = -ENOMEM;
3934 if (ppage0_alloc) {
3935 memset((u8 *)ppage0_alloc, 0, data_sz);
3936 cfg.physAddr = page0_dma;
3937 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
3938
3939 if ((rc = mpt_config(ioc, &cfg)) == 0) {
3940 /* save the data */
3941 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
3942 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
3943
3944 }
3945
3946 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
3947
3948 /* FIXME!
3949 * Normalize endianness of structure data,
3950 * by byte-swapping all > 1 byte fields!
3951 */
3952
3953 }
3954
3955 if (rc)
3956 return rc;
3957 }
3958
3959 /* Get LAN Page 1 header */
3960 hdr.PageVersion = 0;
3961 hdr.PageLength = 0;
3962 hdr.PageNumber = 1;
3963 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
3964 cfg.hdr = &hdr;
3965 cfg.physAddr = -1;
3966 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
3967 cfg.dir = 0;
3968 cfg.pageAddr = 0;
3969
3970 if ((rc = mpt_config(ioc, &cfg)) != 0)
3971 return rc;
3972
3973 if (hdr.PageLength == 0)
3974 return 0;
3975
3976 data_sz = hdr.PageLength * 4;
3977 rc = -ENOMEM;
3978 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
3979 if (ppage1_alloc) {
3980 memset((u8 *)ppage1_alloc, 0, data_sz);
3981 cfg.physAddr = page1_dma;
3982 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
3983
3984 if ((rc = mpt_config(ioc, &cfg)) == 0) {
3985 /* save the data */
3986 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
3987 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
3988 }
3989
3990 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
3991
3992 /* FIXME!
3993 * Normalize endianness of structure data,
3994 * by byte-swapping all > 1 byte fields!
3995 */
3996
3997 }
3998
3999 return rc;
4000 }
4001
4002 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4003 /*
4004 * GetFcPortPage0 - Fetch FCPort config Page0.
4005 * @ioc: Pointer to MPT_ADAPTER structure
4006 * @portnum: IOC Port number
4007 *
4008 * Return: 0 for success
4009 * -ENOMEM if no memory available
4010 * -EPERM if not allowed due to ISR context
4011 * -EAGAIN if no msg frames currently available
4012 * -EFAULT for non-successful reply or no reply (timeout)
4013 */
4014 static int
4015 GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
4016 {
4017 ConfigPageHeader_t hdr;
4018 CONFIGPARMS cfg;
4019 FCPortPage0_t *ppage0_alloc;
4020 FCPortPage0_t *pp0dest;
4021 dma_addr_t page0_dma;
4022 int data_sz;
4023 int copy_sz;
4024 int rc;
4025
4026 /* Get FCPort Page 0 header */
4027 hdr.PageVersion = 0;
4028 hdr.PageLength = 0;
4029 hdr.PageNumber = 0;
4030 hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
4031 cfg.hdr = &hdr;
4032 cfg.physAddr = -1;
4033 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4034 cfg.dir = 0;
4035 cfg.pageAddr = portnum;
4036 cfg.timeout = 0;
4037
4038 if ((rc = mpt_config(ioc, &cfg)) != 0)
4039 return rc;
4040
4041 if (hdr.PageLength == 0)
4042 return 0;
4043
4044 data_sz = hdr.PageLength * 4;
4045 rc = -ENOMEM;
4046 ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4047 if (ppage0_alloc) {
4048 memset((u8 *)ppage0_alloc, 0, data_sz);
4049 cfg.physAddr = page0_dma;
4050 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4051
4052 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4053 /* save the data */
4054 pp0dest = &ioc->fc_port_page0[portnum];
4055 copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz);
4056 memcpy(pp0dest, ppage0_alloc, copy_sz);
4057
4058 /*
4059 * Normalize endianness of structure data,
4060 * by byte-swapping all > 1 byte fields!
4061 */
4062 pp0dest->Flags = le32_to_cpu(pp0dest->Flags);
4063 pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier);
4064 pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low);
4065 pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High);
4066 pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low);
4067 pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High);
4068 pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass);
4069 pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds);
4070 pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed);
4071 pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize);
4072 pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low);
4073 pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High);
4074 pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low);
4075 pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High);
4076 pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount);
4077 pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators);
4078
4079 }
4080
4081 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4082 }
4083
4084 return rc;
4085 }
4086
4087 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4088 /*
4089 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
4090 * @ioc: Pointer to MPT_ADAPTER structure
4091 *
4092 * Returns: 0 for success
4093 * -ENOMEM if no memory available
4094 * -EPERM if not allowed due to ISR context
4095 * -EAGAIN if no msg frames currently available
4096 * -EFAULT for non-successful reply or no reply (timeout)
4097 */
4098 static int
4099 GetIoUnitPage2(MPT_ADAPTER *ioc)
4100 {
4101 ConfigPageHeader_t hdr;
4102 CONFIGPARMS cfg;
4103 IOUnitPage2_t *ppage_alloc;
4104 dma_addr_t page_dma;
4105 int data_sz;
4106 int rc;
4107
4108 /* Get the page header */
4109 hdr.PageVersion = 0;
4110 hdr.PageLength = 0;
4111 hdr.PageNumber = 2;
4112 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
4113 cfg.hdr = &hdr;
4114 cfg.physAddr = -1;
4115 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4116 cfg.dir = 0;
4117 cfg.pageAddr = 0;
4118 cfg.timeout = 0;
4119
4120 if ((rc = mpt_config(ioc, &cfg)) != 0)
4121 return rc;
4122
4123 if (hdr.PageLength == 0)
4124 return 0;
4125
4126 /* Read the config page */
4127 data_sz = hdr.PageLength * 4;
4128 rc = -ENOMEM;
4129 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
4130 if (ppage_alloc) {
4131 memset((u8 *)ppage_alloc, 0, data_sz);
4132 cfg.physAddr = page_dma;
4133 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4134
4135 /* If Good, save data */
4136 if ((rc = mpt_config(ioc, &cfg)) == 0)
4137 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
4138
4139 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
4140 }
4141
4142 return rc;
4143 }
4144
4145 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4146 /* mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
4147 * @ioc: Pointer to a Adapter Strucutre
4148 * @portnum: IOC port number
4149 *
4150 * Return: -EFAULT if read of config page header fails
4151 * or if no nvram
4152 * If read of SCSI Port Page 0 fails,
4153 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
4154 * Adapter settings: async, narrow
4155 * Return 1
4156 * If read of SCSI Port Page 2 fails,
4157 * Adapter settings valid
4158 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
4159 * Return 1
4160 * Else
4161 * Both valid
4162 * Return 0
4163 * CHECK - what type of locking mechanisms should be used????
4164 */
4165 static int
4166 mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
4167 {
4168 u8 *pbuf;
4169 dma_addr_t buf_dma;
4170 CONFIGPARMS cfg;
4171 ConfigPageHeader_t header;
4172 int ii;
4173 int data, rc = 0;
4174
4175 /* Allocate memory
4176 */
4177 if (!ioc->spi_data.nvram) {
4178 int sz;
4179 u8 *mem;
4180 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
4181 mem = kmalloc(sz, GFP_ATOMIC);
4182 if (mem == NULL)
4183 return -EFAULT;
4184
4185 ioc->spi_data.nvram = (int *) mem;
4186
4187 dprintk((MYIOC_s_INFO_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
4188 ioc->name, ioc->spi_data.nvram, sz));
4189 }
4190
4191 /* Invalidate NVRAM information
4192 */
4193 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
4194 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
4195 }
4196
4197 /* Read SPP0 header, allocate memory, then read page.
4198 */
4199 header.PageVersion = 0;
4200 header.PageLength = 0;
4201 header.PageNumber = 0;
4202 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
4203 cfg.hdr = &header;
4204 cfg.physAddr = -1;
4205 cfg.pageAddr = portnum;
4206 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4207 cfg.dir = 0;
4208 cfg.timeout = 0; /* use default */
4209 if (mpt_config(ioc, &cfg) != 0)
4210 return -EFAULT;
4211
4212 if (header.PageLength > 0) {
4213 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
4214 if (pbuf) {
4215 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4216 cfg.physAddr = buf_dma;
4217 if (mpt_config(ioc, &cfg) != 0) {
4218 ioc->spi_data.maxBusWidth = MPT_NARROW;
4219 ioc->spi_data.maxSyncOffset = 0;
4220 ioc->spi_data.minSyncFactor = MPT_ASYNC;
4221 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
4222 rc = 1;
4223 } else {
4224 /* Save the Port Page 0 data
4225 */
4226 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
4227 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
4228 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
4229
4230 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
4231 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
4232 dinitprintk((KERN_INFO MYNAM " :%s noQas due to Capabilities=%x\n",
4233 ioc->name, pPP0->Capabilities));
4234 }
4235 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
4236 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
4237 if (data) {
4238 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
4239 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
4240 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
4241 } else {
4242 ioc->spi_data.maxSyncOffset = 0;
4243 ioc->spi_data.minSyncFactor = MPT_ASYNC;
4244 }
4245
4246 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
4247
4248 /* Update the minSyncFactor based on bus type.
4249 */
4250 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
4251 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
4252
4253 if (ioc->spi_data.minSyncFactor < MPT_ULTRA)
4254 ioc->spi_data.minSyncFactor = MPT_ULTRA;
4255 }
4256 }
4257 if (pbuf) {
4258 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
4259 }
4260 }
4261 }
4262
4263 /* SCSI Port Page 2 - Read the header then the page.
4264 */
4265 header.PageVersion = 0;
4266 header.PageLength = 0;
4267 header.PageNumber = 2;
4268 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
4269 cfg.hdr = &header;
4270 cfg.physAddr = -1;
4271 cfg.pageAddr = portnum;
4272 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4273 cfg.dir = 0;
4274 if (mpt_config(ioc, &cfg) != 0)
4275 return -EFAULT;
4276
4277 if (header.PageLength > 0) {
4278 /* Allocate memory and read SCSI Port Page 2
4279 */
4280 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
4281 if (pbuf) {
4282 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
4283 cfg.physAddr = buf_dma;
4284 if (mpt_config(ioc, &cfg) != 0) {
4285 /* Nvram data is left with INVALID mark
4286 */
4287 rc = 1;
4288 } else {
4289 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
4290 MpiDeviceInfo_t *pdevice = NULL;
4291
4292 /* Save the Port Page 2 data
4293 * (reformat into a 32bit quantity)
4294 */
4295 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
4296 ioc->spi_data.PortFlags = data;
4297 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
4298 pdevice = &pPP2->DeviceSettings[ii];
4299 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
4300 (pdevice->SyncFactor << 8) | pdevice->Timeout;
4301 ioc->spi_data.nvram[ii] = data;
4302 }
4303 }
4304
4305 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
4306 }
4307 }
4308
4309 /* Update Adapter limits with those from NVRAM
4310 * Comment: Don't need to do this. Target performance
4311 * parameters will never exceed the adapters limits.
4312 */
4313
4314 return rc;
4315 }
4316
4317 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4318 /* mpt_readScsiDevicePageHeaders - save version and length of SDP1
4319 * @ioc: Pointer to a Adapter Strucutre
4320 * @portnum: IOC port number
4321 *
4322 * Return: -EFAULT if read of config page header fails
4323 * or 0 if success.
4324 */
4325 static int
4326 mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
4327 {
4328 CONFIGPARMS cfg;
4329 ConfigPageHeader_t header;
4330
4331 /* Read the SCSI Device Page 1 header
4332 */
4333 header.PageVersion = 0;
4334 header.PageLength = 0;
4335 header.PageNumber = 1;
4336 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
4337 cfg.hdr = &header;
4338 cfg.physAddr = -1;
4339 cfg.pageAddr = portnum;
4340 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4341 cfg.dir = 0;
4342 cfg.timeout = 0;
4343 if (mpt_config(ioc, &cfg) != 0)
4344 return -EFAULT;
4345
4346 ioc->spi_data.sdp1version = cfg.hdr->PageVersion;
4347 ioc->spi_data.sdp1length = cfg.hdr->PageLength;
4348
4349 header.PageVersion = 0;
4350 header.PageLength = 0;
4351 header.PageNumber = 0;
4352 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
4353 if (mpt_config(ioc, &cfg) != 0)
4354 return -EFAULT;
4355
4356 ioc->spi_data.sdp0version = cfg.hdr->PageVersion;
4357 ioc->spi_data.sdp0length = cfg.hdr->PageLength;
4358
4359 dcprintk((MYIOC_s_INFO_FMT "Headers: 0: version %d length %d\n",
4360 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
4361
4362 dcprintk((MYIOC_s_INFO_FMT "Headers: 1: version %d length %d\n",
4363 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
4364 return 0;
4365 }
4366
4367 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4368 /**
4369 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
4370 * @ioc: Pointer to a Adapter Strucutre
4371 * @portnum: IOC port number
4372 *
4373 * Return:
4374 * 0 on success
4375 * -EFAULT if read of config page header fails or data pointer not NULL
4376 * -ENOMEM if pci_alloc failed
4377 */
4378 int
4379 mpt_findImVolumes(MPT_ADAPTER *ioc)
4380 {
4381 IOCPage2_t *pIoc2;
4382 u8 *mem;
4383 ConfigPageIoc2RaidVol_t *pIocRv;
4384 dma_addr_t ioc2_dma;
4385 CONFIGPARMS cfg;
4386 ConfigPageHeader_t header;
4387 int jj;
4388 int rc = 0;
4389 int iocpage2sz;
4390 u8 nVols, nPhys;
4391 u8 vid, vbus, vioc;
4392
4393 /* Read IOCP2 header then the page.
4394 */
4395 header.PageVersion = 0;
4396 header.PageLength = 0;
4397 header.PageNumber = 2;
4398 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
4399 cfg.hdr = &header;
4400 cfg.physAddr = -1;
4401 cfg.pageAddr = 0;
4402 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4403 cfg.dir = 0;
4404 cfg.timeout = 0;
4405 if (mpt_config(ioc, &cfg) != 0)
4406 return -EFAULT;
4407
4408 if (header.PageLength == 0)
4409 return -EFAULT;
4410
4411 iocpage2sz = header.PageLength * 4;
4412 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
4413 if (!pIoc2)
4414 return -ENOMEM;
4415
4416 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4417 cfg.physAddr = ioc2_dma;
4418 if (mpt_config(ioc, &cfg) != 0)
4419 goto done_and_free;
4420
4421 if ( (mem = (u8 *)ioc->spi_data.pIocPg2) == NULL ) {
4422 mem = kmalloc(iocpage2sz, GFP_ATOMIC);
4423 if (mem) {
4424 ioc->spi_data.pIocPg2 = (IOCPage2_t *) mem;
4425 } else {
4426 goto done_and_free;
4427 }
4428 }
4429 memcpy(mem, (u8 *)pIoc2, iocpage2sz);
4430
4431 /* Identify RAID Volume Id's */
4432 nVols = pIoc2->NumActiveVolumes;
4433 if ( nVols == 0) {
4434 /* No RAID Volume.
4435 */
4436 goto done_and_free;
4437 } else {
4438 /* At least 1 RAID Volume
4439 */
4440 pIocRv = pIoc2->RaidVolume;
4441 ioc->spi_data.isRaid = 0;
4442 for (jj = 0; jj < nVols; jj++, pIocRv++) {
4443 vid = pIocRv->VolumeID;
4444 vbus = pIocRv->VolumeBus;
4445 vioc = pIocRv->VolumeIOC;
4446
4447 /* find the match
4448 */
4449 if (vbus == 0) {
4450 ioc->spi_data.isRaid |= (1 << vid);
4451 } else {
4452 /* Error! Always bus 0
4453 */
4454 }
4455 }
4456 }
4457
4458 /* Identify Hidden Physical Disk Id's */
4459 nPhys = pIoc2->NumActivePhysDisks;
4460 if (nPhys == 0) {
4461 /* No physical disks.
4462 */
4463 } else {
4464 mpt_read_ioc_pg_3(ioc);
4465 }
4466
4467 done_and_free:
4468 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
4469
4470 return rc;
4471 }
4472
4473 int
4474 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
4475 {
4476 IOCPage3_t *pIoc3;
4477 u8 *mem;
4478 CONFIGPARMS cfg;
4479 ConfigPageHeader_t header;
4480 dma_addr_t ioc3_dma;
4481 int iocpage3sz = 0;
4482
4483 /* Free the old page
4484 */
4485 if (ioc->spi_data.pIocPg3) {
4486 kfree(ioc->spi_data.pIocPg3);
4487 ioc->spi_data.pIocPg3 = NULL;
4488 }
4489
4490 /* There is at least one physical disk.
4491 * Read and save IOC Page 3
4492 */
4493 header.PageVersion = 0;
4494 header.PageLength = 0;
4495 header.PageNumber = 3;
4496 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
4497 cfg.hdr = &header;
4498 cfg.physAddr = -1;
4499 cfg.pageAddr = 0;
4500 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4501 cfg.dir = 0;
4502 cfg.timeout = 0;
4503 if (mpt_config(ioc, &cfg) != 0)
4504 return 0;
4505
4506 if (header.PageLength == 0)
4507 return 0;
4508
4509 /* Read Header good, alloc memory
4510 */
4511 iocpage3sz = header.PageLength * 4;
4512 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
4513 if (!pIoc3)
4514 return 0;
4515
4516 /* Read the Page and save the data
4517 * into malloc'd memory.
4518 */
4519 cfg.physAddr = ioc3_dma;
4520 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4521 if (mpt_config(ioc, &cfg) == 0) {
4522 mem = kmalloc(iocpage3sz, GFP_ATOMIC);
4523 if (mem) {
4524 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
4525 ioc->spi_data.pIocPg3 = (IOCPage3_t *) mem;
4526 }
4527 }
4528
4529 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
4530
4531 return 0;
4532 }
4533
4534 static void
4535 mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
4536 {
4537 IOCPage4_t *pIoc4;
4538 CONFIGPARMS cfg;
4539 ConfigPageHeader_t header;
4540 dma_addr_t ioc4_dma;
4541 int iocpage4sz;
4542
4543 /* Read and save IOC Page 4
4544 */
4545 header.PageVersion = 0;
4546 header.PageLength = 0;
4547 header.PageNumber = 4;
4548 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
4549 cfg.hdr = &header;
4550 cfg.physAddr = -1;
4551 cfg.pageAddr = 0;
4552 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4553 cfg.dir = 0;
4554 cfg.timeout = 0;
4555 if (mpt_config(ioc, &cfg) != 0)
4556 return;
4557
4558 if (header.PageLength == 0)
4559 return;
4560
4561 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
4562 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
4563 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
4564 if (!pIoc4)
4565 return;
4566 } else {
4567 ioc4_dma = ioc->spi_data.IocPg4_dma;
4568 iocpage4sz = ioc->spi_data.IocPg4Sz;
4569 }
4570
4571 /* Read the Page into dma memory.
4572 */
4573 cfg.physAddr = ioc4_dma;
4574 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4575 if (mpt_config(ioc, &cfg) == 0) {
4576 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
4577 ioc->spi_data.IocPg4_dma = ioc4_dma;
4578 ioc->spi_data.IocPg4Sz = iocpage4sz;
4579 } else {
4580 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
4581 ioc->spi_data.pIocPg4 = NULL;
4582 }
4583 }
4584
4585 static void
4586 mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
4587 {
4588 IOCPage1_t *pIoc1;
4589 CONFIGPARMS cfg;
4590 ConfigPageHeader_t header;
4591 dma_addr_t ioc1_dma;
4592 int iocpage1sz = 0;
4593 u32 tmp;
4594
4595 /* Check the Coalescing Timeout in IOC Page 1
4596 */
4597 header.PageVersion = 0;
4598 header.PageLength = 0;
4599 header.PageNumber = 1;
4600 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
4601 cfg.hdr = &header;
4602 cfg.physAddr = -1;
4603 cfg.pageAddr = 0;
4604 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4605 cfg.dir = 0;
4606 cfg.timeout = 0;
4607 if (mpt_config(ioc, &cfg) != 0)
4608 return;
4609
4610 if (header.PageLength == 0)
4611 return;
4612
4613 /* Read Header good, alloc memory
4614 */
4615 iocpage1sz = header.PageLength * 4;
4616 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
4617 if (!pIoc1)
4618 return;
4619
4620 /* Read the Page and check coalescing timeout
4621 */
4622 cfg.physAddr = ioc1_dma;
4623 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4624 if (mpt_config(ioc, &cfg) == 0) {
4625
4626 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
4627 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
4628 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
4629
4630 dprintk((MYIOC_s_INFO_FMT "Coalescing Enabled Timeout = %d\n",
4631 ioc->name, tmp));
4632
4633 if (tmp > MPT_COALESCING_TIMEOUT) {
4634 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
4635
4636 /* Write NVRAM and current
4637 */
4638 cfg.dir = 1;
4639 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
4640 if (mpt_config(ioc, &cfg) == 0) {
4641 dprintk((MYIOC_s_INFO_FMT "Reset Current Coalescing Timeout to = %d\n",
4642 ioc->name, MPT_COALESCING_TIMEOUT));
4643
4644 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
4645 if (mpt_config(ioc, &cfg) == 0) {
4646 dprintk((MYIOC_s_INFO_FMT "Reset NVRAM Coalescing Timeout to = %d\n",
4647 ioc->name, MPT_COALESCING_TIMEOUT));
4648 } else {
4649 dprintk((MYIOC_s_INFO_FMT "Reset NVRAM Coalescing Timeout Failed\n",
4650 ioc->name));
4651 }
4652
4653 } else {
4654 dprintk((MYIOC_s_WARN_FMT "Reset of Current Coalescing Timeout Failed!\n",
4655 ioc->name));
4656 }
4657 }
4658
4659 } else {
4660 dprintk((MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
4661 }
4662 }
4663
4664 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
4665
4666 return;
4667 }
4668
4669 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4670 /*
4671 * SendEventNotification - Send EventNotification (on or off) request
4672 * to MPT adapter.
4673 * @ioc: Pointer to MPT_ADAPTER structure
4674 * @EvSwitch: Event switch flags
4675 */
4676 static int
4677 SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch)
4678 {
4679 EventNotification_t *evnp;
4680
4681 evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
4682 if (evnp == NULL) {
4683 dprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
4684 ioc->name));
4685 return 0;
4686 }
4687 memset(evnp, 0, sizeof(*evnp));
4688
4689 dprintk((MYIOC_s_INFO_FMT "Sending EventNotification(%d)\n", ioc->name, EvSwitch));
4690
4691 evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
4692 evnp->ChainOffset = 0;
4693 evnp->MsgFlags = 0;
4694 evnp->Switch = EvSwitch;
4695
4696 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)evnp);
4697
4698 return 0;
4699 }
4700
4701 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4702 /**
4703 * SendEventAck - Send EventAck request to MPT adapter.
4704 * @ioc: Pointer to MPT_ADAPTER structure
4705 * @evnp: Pointer to original EventNotification request
4706 */
4707 static int
4708 SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
4709 {
4710 EventAck_t *pAck;
4711
4712 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
4713 printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK request frame!\n",
4714 ioc->name);
4715 return -1;
4716 }
4717 memset(pAck, 0, sizeof(*pAck));
4718
4719 dprintk((MYIOC_s_INFO_FMT "Sending EventAck\n", ioc->name));
4720
4721 pAck->Function = MPI_FUNCTION_EVENT_ACK;
4722 pAck->ChainOffset = 0;
4723 pAck->MsgFlags = 0;
4724 pAck->Event = evnp->Event;
4725 pAck->EventContext = evnp->EventContext;
4726
4727 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
4728
4729 return 0;
4730 }
4731
4732 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4733 /**
4734 * mpt_config - Generic function to issue config message
4735 * @ioc - Pointer to an adapter structure
4736 * @cfg - Pointer to a configuration structure. Struct contains
4737 * action, page address, direction, physical address
4738 * and pointer to a configuration page header
4739 * Page header is updated.
4740 *
4741 * Returns 0 for success
4742 * -EPERM if not allowed due to ISR context
4743 * -EAGAIN if no msg frames currently available
4744 * -EFAULT for non-successful reply or no reply (timeout)
4745 */
4746 int
4747 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
4748 {
4749 Config_t *pReq;
4750 MPT_FRAME_HDR *mf;
4751 unsigned long flags;
4752 int ii, rc;
4753 u32 flagsLength;
4754 int in_isr;
4755
4756 /* (Bugzilla:fibrebugs, #513)
4757 * Bug fix (part 1)! 20010905 -sralston
4758 * Prevent calling wait_event() (below), if caller happens
4759 * to be in ISR context, because that is fatal!
4760 */
4761 in_isr = in_interrupt();
4762 if (in_isr) {
4763 dcprintk((MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
4764 ioc->name));
4765 return -EPERM;
4766 }
4767
4768 /* Get and Populate a free Frame
4769 */
4770 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
4771 dcprintk((MYIOC_s_WARN_FMT "mpt_config: no msg frames!\n",
4772 ioc->name));
4773 return -EAGAIN;
4774 }
4775 pReq = (Config_t *)mf;
4776 pReq->Action = pCfg->action;
4777 pReq->Reserved = 0;
4778 pReq->ChainOffset = 0;
4779 pReq->Function = MPI_FUNCTION_CONFIG;
4780 pReq->ExtPageLength = 0;
4781 pReq->ExtPageType = 0;
4782 pReq->MsgFlags = 0;
4783 for (ii=0; ii < 8; ii++)
4784 pReq->Reserved2[ii] = 0;
4785
4786 pReq->Header.PageVersion = pCfg->hdr->PageVersion;
4787 pReq->Header.PageLength = pCfg->hdr->PageLength;
4788 pReq->Header.PageNumber = pCfg->hdr->PageNumber;
4789 pReq->Header.PageType = (pCfg->hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
4790 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
4791
4792 /* Add a SGE to the config request.
4793 */
4794 if (pCfg->dir)
4795 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
4796 else
4797 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
4798
4799 flagsLength |= pCfg->hdr->PageLength * 4;
4800
4801 mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
4802
4803 dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n",
4804 ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
4805
4806 /* Append pCfg pointer to end of mf
4807 */
4808 *((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) = (void *) pCfg;
4809
4810 /* Initalize the timer
4811 */
4812 init_timer(&pCfg->timer);
4813 pCfg->timer.data = (unsigned long) ioc;
4814 pCfg->timer.function = mpt_timer_expired;
4815 pCfg->wait_done = 0;
4816
4817 /* Set the timer; ensure 10 second minimum */
4818 if (pCfg->timeout < 10)
4819 pCfg->timer.expires = jiffies + HZ*10;
4820 else
4821 pCfg->timer.expires = jiffies + HZ*pCfg->timeout;
4822
4823 /* Add to end of Q, set timer and then issue this command */
4824 spin_lock_irqsave(&ioc->FreeQlock, flags);
4825 list_add_tail(&pCfg->linkage, &ioc->configQ);
4826 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4827
4828 add_timer(&pCfg->timer);
4829 mpt_put_msg_frame(mpt_base_index, ioc, mf);
4830 wait_event(mpt_waitq, pCfg->wait_done);
4831
4832 /* mf has been freed - do not access */
4833
4834 rc = pCfg->status;
4835
4836 return rc;
4837 }
4838
4839 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4840 /**
4841 * mpt_toolbox - Generic function to issue toolbox message
4842 * @ioc - Pointer to an adapter structure
4843 * @cfg - Pointer to a toolbox structure. Struct contains
4844 * action, page address, direction, physical address
4845 * and pointer to a configuration page header
4846 * Page header is updated.
4847 *
4848 * Returns 0 for success
4849 * -EPERM if not allowed due to ISR context
4850 * -EAGAIN if no msg frames currently available
4851 * -EFAULT for non-successful reply or no reply (timeout)
4852 */
4853 int
4854 mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
4855 {
4856 ToolboxIstwiReadWriteRequest_t *pReq;
4857 MPT_FRAME_HDR *mf;
4858 struct pci_dev *pdev;
4859 unsigned long flags;
4860 int rc;
4861 u32 flagsLength;
4862 int in_isr;
4863
4864 /* (Bugzilla:fibrebugs, #513)
4865 * Bug fix (part 1)! 20010905 -sralston
4866 * Prevent calling wait_event() (below), if caller happens
4867 * to be in ISR context, because that is fatal!
4868 */
4869 in_isr = in_interrupt();
4870 if (in_isr) {
4871 dcprintk((MYIOC_s_WARN_FMT "toobox request not allowed in ISR context!\n",
4872 ioc->name));
4873 return -EPERM;
4874 }
4875
4876 /* Get and Populate a free Frame
4877 */
4878 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
4879 dcprintk((MYIOC_s_WARN_FMT "mpt_toolbox: no msg frames!\n",
4880 ioc->name));
4881 return -EAGAIN;
4882 }
4883 pReq = (ToolboxIstwiReadWriteRequest_t *)mf;
4884 pReq->Tool = pCfg->action;
4885 pReq->Reserved = 0;
4886 pReq->ChainOffset = 0;
4887 pReq->Function = MPI_FUNCTION_TOOLBOX;
4888 pReq->Reserved1 = 0;
4889 pReq->Reserved2 = 0;
4890 pReq->MsgFlags = 0;
4891 pReq->Flags = pCfg->dir;
4892 pReq->BusNum = 0;
4893 pReq->Reserved3 = 0;
4894 pReq->NumAddressBytes = 0x01;
4895 pReq->Reserved4 = 0;
4896 pReq->DataLength = 0x04;
4897 pdev = (struct pci_dev *) ioc->pcidev;
4898 if (pdev->devfn & 1)
4899 pReq->DeviceAddr = 0xB2;
4900 else
4901 pReq->DeviceAddr = 0xB0;
4902 pReq->Addr1 = 0;
4903 pReq->Addr2 = 0;
4904 pReq->Addr3 = 0;
4905 pReq->Reserved5 = 0;
4906
4907 /* Add a SGE to the config request.
4908 */
4909
4910 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | 4;
4911
4912 mpt_add_sge((char *)&pReq->SGL, flagsLength, pCfg->physAddr);
4913
4914 dcprintk((MYIOC_s_INFO_FMT "Sending Toolbox request, Tool=%x\n",
4915 ioc->name, pReq->Tool));
4916
4917 /* Append pCfg pointer to end of mf
4918 */
4919 *((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) = (void *) pCfg;
4920
4921 /* Initalize the timer
4922 */
4923 init_timer(&pCfg->timer);
4924 pCfg->timer.data = (unsigned long) ioc;
4925 pCfg->timer.function = mpt_timer_expired;
4926 pCfg->wait_done = 0;
4927
4928 /* Set the timer; ensure 10 second minimum */
4929 if (pCfg->timeout < 10)
4930 pCfg->timer.expires = jiffies + HZ*10;
4931 else
4932 pCfg->timer.expires = jiffies + HZ*pCfg->timeout;
4933
4934 /* Add to end of Q, set timer and then issue this command */
4935 spin_lock_irqsave(&ioc->FreeQlock, flags);
4936 list_add_tail(&pCfg->linkage, &ioc->configQ);
4937 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4938
4939 add_timer(&pCfg->timer);
4940 mpt_put_msg_frame(mpt_base_index, ioc, mf);
4941 wait_event(mpt_waitq, pCfg->wait_done);
4942
4943 /* mf has been freed - do not access */
4944
4945 rc = pCfg->status;
4946
4947 return rc;
4948 }
4949
4950 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4951 /*
4952 * mpt_timer_expired - Call back for timer process.
4953 * Used only internal config functionality.
4954 * @data: Pointer to MPT_SCSI_HOST recast as an unsigned long
4955 */
4956 static void
4957 mpt_timer_expired(unsigned long data)
4958 {
4959 MPT_ADAPTER *ioc = (MPT_ADAPTER *) data;
4960
4961 dcprintk((MYIOC_s_WARN_FMT "mpt_timer_expired! \n", ioc->name));
4962
4963 /* Perform a FW reload */
4964 if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
4965 printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", ioc->name);
4966
4967 /* No more processing.
4968 * Hard reset clean-up will wake up
4969 * process and free all resources.
4970 */
4971 dcprintk((MYIOC_s_WARN_FMT "mpt_timer_expired complete!\n", ioc->name));
4972
4973 return;
4974 }
4975
4976 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4977 /*
4978 * mpt_ioc_reset - Base cleanup for hard reset
4979 * @ioc: Pointer to the adapter structure
4980 * @reset_phase: Indicates pre- or post-reset functionality
4981 *
4982 * Remark: Free's resources with internally generated commands.
4983 */
4984 static int
4985 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
4986 {
4987 CONFIGPARMS *pCfg;
4988 unsigned long flags;
4989
4990 dprintk((KERN_WARNING MYNAM
4991 ": IOC %s_reset routed to MPT base driver!\n",
4992 reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
4993 reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
4994
4995 if (reset_phase == MPT_IOC_SETUP_RESET) {
4996 ;
4997 } else if (reset_phase == MPT_IOC_PRE_RESET) {
4998 /* If the internal config Q is not empty -
4999 * delete timer. MF resources will be freed when
5000 * the FIFO's are primed.
5001 */
5002 spin_lock_irqsave(&ioc->FreeQlock, flags);
5003 list_for_each_entry(pCfg, &ioc->configQ, linkage)
5004 del_timer(&pCfg->timer);
5005 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
5006
5007 } else {
5008 CONFIGPARMS *pNext;
5009
5010 /* Search the configQ for internal commands.
5011 * Flush the Q, and wake up all suspended threads.
5012 */
5013 spin_lock_irqsave(&ioc->FreeQlock, flags);
5014 list_for_each_entry_safe(pCfg, pNext, &ioc->configQ, linkage) {
5015 list_del(&pCfg->linkage);
5016
5017 pCfg->status = MPT_CONFIG_ERROR;
5018 pCfg->wait_done = 1;
5019 wake_up(&mpt_waitq);
5020 }
5021 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
5022 }
5023
5024 return 1; /* currently means nothing really */
5025 }
5026
5027
5028 #ifdef CONFIG_PROC_FS /* { */
5029 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5030 /*
5031 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
5032 */
5033 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5034 /*
5035 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
5036 *
5037 * Returns 0 for success, non-zero for failure.
5038 */
5039 static int
5040 procmpt_create(void)
5041 {
5042 struct proc_dir_entry *ent;
5043
5044 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
5045 if (mpt_proc_root_dir == NULL)
5046 return -ENOTDIR;
5047
5048 ent = create_proc_entry("summary", S_IFREG|S_IRUGO, mpt_proc_root_dir);
5049 if (ent)
5050 ent->read_proc = procmpt_summary_read;
5051
5052 ent = create_proc_entry("version", S_IFREG|S_IRUGO, mpt_proc_root_dir);
5053 if (ent)
5054 ent->read_proc = procmpt_version_read;
5055
5056 return 0;
5057 }
5058
5059 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5060 /*
5061 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
5062 *
5063 * Returns 0 for success, non-zero for failure.
5064 */
5065 static void
5066 procmpt_destroy(void)
5067 {
5068 remove_proc_entry("version", mpt_proc_root_dir);
5069 remove_proc_entry("summary", mpt_proc_root_dir);
5070 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
5071 }
5072
5073 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5074 /*
5075 * procmpt_summary_read - Handle read request from /proc/mpt/summary
5076 * or from /proc/mpt/iocN/summary.
5077 * @buf: Pointer to area to write information
5078 * @start: Pointer to start pointer
5079 * @offset: Offset to start writing
5080 * @request:
5081 * @eof: Pointer to EOF integer
5082 * @data: Pointer
5083 *
5084 * Returns number of characters written to process performing the read.
5085 */
5086 static int
5087 procmpt_summary_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
5088 {
5089 MPT_ADAPTER *ioc;
5090 char *out = buf;
5091 int len;
5092
5093 if (data) {
5094 int more = 0;
5095
5096 ioc = data;
5097 mpt_print_ioc_summary(ioc, out, &more, 0, 1);
5098
5099 out += more;
5100 } else {
5101 list_for_each_entry(ioc, &ioc_list, list) {
5102 int more = 0;
5103
5104 mpt_print_ioc_summary(ioc, out, &more, 0, 1);
5105
5106 out += more;
5107 if ((out-buf) >= request)
5108 break;
5109 }
5110 }
5111
5112 len = out - buf;
5113
5114 MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
5115 }
5116
5117 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5118 /*
5119 * procmpt_version_read - Handle read request from /proc/mpt/version.
5120 * @buf: Pointer to area to write information
5121 * @start: Pointer to start pointer
5122 * @offset: Offset to start writing
5123 * @request:
5124 * @eof: Pointer to EOF integer
5125 * @data: Pointer
5126 *
5127 * Returns number of characters written to process performing the read.
5128 */
5129 static int
5130 procmpt_version_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
5131 {
5132 int ii;
5133 int scsi, lan, ctl, targ, dmp;
5134 char *drvname;
5135 int len;
5136
5137 len = sprintf(buf, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
5138 len += sprintf(buf+len, " Fusion MPT base driver\n");
5139
5140 scsi = lan = ctl = targ = dmp = 0;
5141 for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
5142 drvname = NULL;
5143 if (MptCallbacks[ii]) {
5144 switch (MptDriverClass[ii]) {
5145 case MPTSCSIH_DRIVER:
5146 if (!scsi++) drvname = "SCSI host";
5147 break;
5148 case MPTLAN_DRIVER:
5149 if (!lan++) drvname = "LAN";
5150 break;
5151 case MPTSTM_DRIVER:
5152 if (!targ++) drvname = "SCSI target";
5153 break;
5154 case MPTCTL_DRIVER:
5155 if (!ctl++) drvname = "ioctl";
5156 break;
5157 }
5158
5159 if (drvname)
5160 len += sprintf(buf+len, " Fusion MPT %s driver\n", drvname);
5161 }
5162 }
5163
5164 MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
5165 }
5166
5167 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5168 /*
5169 * procmpt_iocinfo_read - Handle read request from /proc/mpt/iocN/info.
5170 * @buf: Pointer to area to write information
5171 * @start: Pointer to start pointer
5172 * @offset: Offset to start writing
5173 * @request:
5174 * @eof: Pointer to EOF integer
5175 * @data: Pointer
5176 *
5177 * Returns number of characters written to process performing the read.
5178 */
5179 static int
5180 procmpt_iocinfo_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
5181 {
5182 MPT_ADAPTER *ioc = data;
5183 int len;
5184 char expVer[32];
5185 int sz;
5186 int p;
5187
5188 mpt_get_fw_exp_ver(expVer, ioc);
5189
5190 len = sprintf(buf, "%s:", ioc->name);
5191 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
5192 len += sprintf(buf+len, " (f/w download boot flag set)");
5193 // if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
5194 // len += sprintf(buf+len, " CONFIG_CHECKSUM_FAIL!");
5195
5196 len += sprintf(buf+len, "\n ProductID = 0x%04x (%s)\n",
5197 ioc->facts.ProductID,
5198 ioc->prod_name);
5199 len += sprintf(buf+len, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
5200 if (ioc->facts.FWImageSize)
5201 len += sprintf(buf+len, " (fw_size=%d)", ioc->facts.FWImageSize);
5202 len += sprintf(buf+len, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
5203 len += sprintf(buf+len, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
5204 len += sprintf(buf+len, " EventState = 0x%02x\n", ioc->facts.EventState);
5205
5206 len += sprintf(buf+len, " CurrentHostMfaHighAddr = 0x%08x\n",
5207 ioc->facts.CurrentHostMfaHighAddr);
5208 len += sprintf(buf+len, " CurrentSenseBufferHighAddr = 0x%08x\n",
5209 ioc->facts.CurrentSenseBufferHighAddr);
5210
5211 len += sprintf(buf+len, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
5212 len += sprintf(buf+len, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
5213
5214 len += sprintf(buf+len, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
5215 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
5216 /*
5217 * Rounding UP to nearest 4-kB boundary here...
5218 */
5219 sz = (ioc->req_sz * ioc->req_depth) + 128;
5220 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
5221 len += sprintf(buf+len, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
5222 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
5223 len += sprintf(buf+len, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
5224 4*ioc->facts.RequestFrameSize,
5225 ioc->facts.GlobalCredits);
5226
5227 len += sprintf(buf+len, " Frames @ 0x%p (Dma @ 0x%p)\n",
5228 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
5229 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
5230 len += sprintf(buf+len, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
5231 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
5232 len += sprintf(buf+len, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
5233 ioc->facts.CurReplyFrameSize,
5234 ioc->facts.ReplyQueueDepth);
5235
5236 len += sprintf(buf+len, " MaxDevices = %d\n",
5237 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
5238 len += sprintf(buf+len, " MaxBuses = %d\n", ioc->facts.MaxBuses);
5239
5240 /* per-port info */
5241 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
5242 len += sprintf(buf+len, " PortNumber = %d (of %d)\n",
5243 p+1,
5244 ioc->facts.NumberOfPorts);
5245 if (ioc->bus_type == FC) {
5246 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
5247 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
5248 len += sprintf(buf+len, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
5249 a[5], a[4], a[3], a[2], a[1], a[0]);
5250 }
5251 len += sprintf(buf+len, " WWN = %08X%08X:%08X%08X\n",
5252 ioc->fc_port_page0[p].WWNN.High,
5253 ioc->fc_port_page0[p].WWNN.Low,
5254 ioc->fc_port_page0[p].WWPN.High,
5255 ioc->fc_port_page0[p].WWPN.Low);
5256 }
5257 }
5258
5259 MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
5260 }
5261
5262 #endif /* CONFIG_PROC_FS } */
5263
5264 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5265 static void
5266 mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
5267 {
5268 buf[0] ='\0';
5269 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
5270 sprintf(buf, " (Exp %02d%02d)",
5271 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
5272 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
5273
5274 /* insider hack! */
5275 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
5276 strcat(buf, " [MDBG]");
5277 }
5278 }
5279
5280 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5281 /**
5282 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
5283 * @ioc: Pointer to MPT_ADAPTER structure
5284 * @buffer: Pointer to buffer where IOC summary info should be written
5285 * @size: Pointer to number of bytes we wrote (set by this routine)
5286 * @len: Offset at which to start writing in buffer
5287 * @showlan: Display LAN stuff?
5288 *
5289 * This routine writes (english readable) ASCII text, which represents
5290 * a summary of IOC information, to a buffer.
5291 */
5292 void
5293 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
5294 {
5295 char expVer[32];
5296 int y;
5297
5298 mpt_get_fw_exp_ver(expVer, ioc);
5299
5300 /*
5301 * Shorter summary of attached ioc's...
5302 */
5303 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
5304 ioc->name,
5305 ioc->prod_name,
5306 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
5307 ioc->facts.FWVersion.Word,
5308 expVer,
5309 ioc->facts.NumberOfPorts,
5310 ioc->req_depth);
5311
5312 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
5313 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
5314 y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
5315 a[5], a[4], a[3], a[2], a[1], a[0]);
5316 }
5317
5318 #ifndef __sparc__
5319 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
5320 #else
5321 y += sprintf(buffer+len+y, ", IRQ=%s", __irq_itoa(ioc->pci_irq));
5322 #endif
5323
5324 if (!ioc->active)
5325 y += sprintf(buffer+len+y, " (disabled)");
5326
5327 y += sprintf(buffer+len+y, "\n");
5328
5329 *size = y;
5330 }
5331
5332 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5333 /*
5334 * Reset Handling
5335 */
5336 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5337 /**
5338 * mpt_HardResetHandler - Generic reset handler, issue SCSI Task
5339 * Management call based on input arg values. If TaskMgmt fails,
5340 * return associated SCSI request.
5341 * @ioc: Pointer to MPT_ADAPTER structure
5342 * @sleepFlag: Indicates if sleep or schedule must be called.
5343 *
5344 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
5345 * or a non-interrupt thread. In the former, must not call schedule().
5346 *
5347 * Remark: A return of -1 is a FATAL error case, as it means a
5348 * FW reload/initialization failed.
5349 *
5350 * Returns 0 for SUCCESS or -1 if FAILED.
5351 */
5352 int
5353 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
5354 {
5355 int rc;
5356 unsigned long flags;
5357
5358 dtmprintk((MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name));
5359 #ifdef MFCNT
5360 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
5361 printk("MF count 0x%x !\n", ioc->mfcnt);
5362 #endif
5363
5364 /* Reset the adapter. Prevent more than 1 call to
5365 * mpt_do_ioc_recovery at any instant in time.
5366 */
5367 spin_lock_irqsave(&ioc->diagLock, flags);
5368 if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)){
5369 spin_unlock_irqrestore(&ioc->diagLock, flags);
5370 return 0;
5371 } else {
5372 ioc->diagPending = 1;
5373 }
5374 spin_unlock_irqrestore(&ioc->diagLock, flags);
5375
5376 /* FIXME: If do_ioc_recovery fails, repeat....
5377 */
5378
5379 /* The SCSI driver needs to adjust timeouts on all current
5380 * commands prior to the diagnostic reset being issued.
5381 * Prevents timeouts occuring during a diagnostic reset...very bad.
5382 * For all other protocol drivers, this is a no-op.
5383 */
5384 {
5385 int ii;
5386 int r = 0;
5387
5388 for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
5389 if (MptResetHandlers[ii]) {
5390 dtmprintk((MYIOC_s_INFO_FMT "Calling IOC reset_setup handler #%d\n",
5391 ioc->name, ii));
5392 r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_SETUP_RESET);
5393 if (ioc->alt_ioc) {
5394 dtmprintk((MYIOC_s_INFO_FMT "Calling alt-%s setup reset handler #%d\n",
5395 ioc->name, ioc->alt_ioc->name, ii));
5396 r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_SETUP_RESET);
5397 }
5398 }
5399 }
5400 }
5401
5402 if ((rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag)) != 0) {
5403 printk(KERN_WARNING MYNAM ": WARNING - (%d) Cannot recover %s\n",
5404 rc, ioc->name);
5405 }
5406 ioc->reload_fw = 0;
5407 if (ioc->alt_ioc)
5408 ioc->alt_ioc->reload_fw = 0;
5409
5410 spin_lock_irqsave(&ioc->diagLock, flags);
5411 ioc->diagPending = 0;
5412 if (ioc->alt_ioc)
5413 ioc->alt_ioc->diagPending = 0;
5414 spin_unlock_irqrestore(&ioc->diagLock, flags);
5415
5416 dtmprintk((MYIOC_s_INFO_FMT "HardResetHandler rc = %d!\n", ioc->name, rc));
5417
5418 return rc;
5419 }
5420
5421 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5422 static char *
5423 EventDescriptionStr(u8 event, u32 evData0)
5424 {
5425 char *ds;
5426
5427 switch(event) {
5428 case MPI_EVENT_NONE:
5429 ds = "None";
5430 break;
5431 case MPI_EVENT_LOG_DATA:
5432 ds = "Log Data";
5433 break;
5434 case MPI_EVENT_STATE_CHANGE:
5435 ds = "State Change";
5436 break;
5437 case MPI_EVENT_UNIT_ATTENTION:
5438 ds = "Unit Attention";
5439 break;
5440 case MPI_EVENT_IOC_BUS_RESET:
5441 ds = "IOC Bus Reset";
5442 break;
5443 case MPI_EVENT_EXT_BUS_RESET:
5444 ds = "External Bus Reset";
5445 break;
5446 case MPI_EVENT_RESCAN:
5447 ds = "Bus Rescan Event";
5448 /* Ok, do we need to do anything here? As far as
5449 I can tell, this is when a new device gets added
5450 to the loop. */
5451 break;
5452 case MPI_EVENT_LINK_STATUS_CHANGE:
5453 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
5454 ds = "Link Status(FAILURE) Change";
5455 else
5456 ds = "Link Status(ACTIVE) Change";
5457 break;
5458 case MPI_EVENT_LOOP_STATE_CHANGE:
5459 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
5460 ds = "Loop State(LIP) Change";
5461 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
5462 ds = "Loop State(LPE) Change"; /* ??? */
5463 else
5464 ds = "Loop State(LPB) Change"; /* ??? */
5465 break;
5466 case MPI_EVENT_LOGOUT:
5467 ds = "Logout";
5468 break;
5469 case MPI_EVENT_EVENT_CHANGE:
5470 if (evData0)
5471 ds = "Events(ON) Change";
5472 else
5473 ds = "Events(OFF) Change";
5474 break;
5475 case MPI_EVENT_INTEGRATED_RAID:
5476 ds = "Integrated Raid";
5477 break;
5478 /*
5479 * MPT base "custom" events may be added here...
5480 */
5481 default:
5482 ds = "Unknown";
5483 break;
5484 }
5485 return ds;
5486 }
5487
5488 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5489 /*
5490 * ProcessEventNotification - Route a received EventNotificationReply to
5491 * all currently regeistered event handlers.
5492 * @ioc: Pointer to MPT_ADAPTER structure
5493 * @pEventReply: Pointer to EventNotification reply frame
5494 * @evHandlers: Pointer to integer, number of event handlers
5495 *
5496 * Returns sum of event handlers return values.
5497 */
5498 static int
5499 ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
5500 {
5501 u16 evDataLen;
5502 u32 evData0 = 0;
5503 // u32 evCtx;
5504 int ii;
5505 int r = 0;
5506 int handlers = 0;
5507 char *evStr;
5508 u8 event;
5509
5510 /*
5511 * Do platform normalization of values
5512 */
5513 event = le32_to_cpu(pEventReply->Event) & 0xFF;
5514 // evCtx = le32_to_cpu(pEventReply->EventContext);
5515 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
5516 if (evDataLen) {
5517 evData0 = le32_to_cpu(pEventReply->Data[0]);
5518 }
5519
5520 evStr = EventDescriptionStr(event, evData0);
5521 devtprintk((MYIOC_s_INFO_FMT "MPT event (%s=%02Xh) detected!\n",
5522 ioc->name,
5523 evStr,
5524 event));
5525
5526 #if defined(MPT_DEBUG) || defined(MPT_DEBUG_EVENTS)
5527 printk(KERN_INFO MYNAM ": Event data:\n" KERN_INFO);
5528 for (ii = 0; ii < evDataLen; ii++)
5529 printk(" %08x", le32_to_cpu(pEventReply->Data[ii]));
5530 printk("\n");
5531 #endif
5532
5533 /*
5534 * Do general / base driver event processing
5535 */
5536 switch(event) {
5537 case MPI_EVENT_NONE: /* 00 */
5538 case MPI_EVENT_LOG_DATA: /* 01 */
5539 case MPI_EVENT_STATE_CHANGE: /* 02 */
5540 case MPI_EVENT_UNIT_ATTENTION: /* 03 */
5541 case MPI_EVENT_IOC_BUS_RESET: /* 04 */
5542 case MPI_EVENT_EXT_BUS_RESET: /* 05 */
5543 case MPI_EVENT_RESCAN: /* 06 */
5544 case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */
5545 case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */
5546 case MPI_EVENT_LOGOUT: /* 09 */
5547 case MPI_EVENT_INTEGRATED_RAID: /* 0B */
5548 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: /* 0C */
5549 default:
5550 break;
5551 case MPI_EVENT_EVENT_CHANGE: /* 0A */
5552 if (evDataLen) {
5553 u8 evState = evData0 & 0xFF;
5554
5555 /* CHECKME! What if evState unexpectedly says OFF (0)? */
5556
5557 /* Update EventState field in cached IocFacts */
5558 if (ioc->facts.Function) {
5559 ioc->facts.EventState = evState;
5560 }
5561 }
5562 break;
5563 }
5564
5565 /*
5566 * Should this event be logged? Events are written sequentially.
5567 * When buffer is full, start again at the top.
5568 */
5569 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
5570 int idx;
5571
5572 idx = ioc->eventContext % ioc->eventLogSize;
5573
5574 ioc->events[idx].event = event;
5575 ioc->events[idx].eventContext = ioc->eventContext;
5576
5577 for (ii = 0; ii < 2; ii++) {
5578 if (ii < evDataLen)
5579 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
5580 else
5581 ioc->events[idx].data[ii] = 0;
5582 }
5583
5584 ioc->eventContext++;
5585 }
5586
5587
5588 /*
5589 * Call each currently registered protocol event handler.
5590 */
5591 for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
5592 if (MptEvHandlers[ii]) {
5593 devtprintk((MYIOC_s_INFO_FMT "Routing Event to event handler #%d\n",
5594 ioc->name, ii));
5595 r += (*(MptEvHandlers[ii]))(ioc, pEventReply);
5596 handlers++;
5597 }
5598 }
5599 /* FIXME? Examine results here? */
5600
5601 /*
5602 * If needed, send (a single) EventAck.
5603 */
5604 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
5605 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
5606 devtprintk((MYIOC_s_WARN_FMT "SendEventAck returned %d\n",
5607 ioc->name, ii));
5608 }
5609 }
5610
5611 *evHandlers = handlers;
5612 return r;
5613 }
5614
5615 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5616 /*
5617 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
5618 * @ioc: Pointer to MPT_ADAPTER structure
5619 * @log_info: U32 LogInfo reply word from the IOC
5620 *
5621 * Refer to lsi/fc_log.h.
5622 */
5623 static void
5624 mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
5625 {
5626 static char *subcl_str[8] = {
5627 "FCP Initiator", "FCP Target", "LAN", "MPI Message Layer",
5628 "FC Link", "Context Manager", "Invalid Field Offset", "State Change Info"
5629 };
5630 u8 subcl = (log_info >> 24) & 0x7;
5631
5632 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubCl={%s}\n",
5633 ioc->name, log_info, subcl_str[subcl]);
5634 }
5635
5636 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5637 /*
5638 * mpt_sp_log_info - Log information returned from SCSI Parallel IOC.
5639 * @ioc: Pointer to MPT_ADAPTER structure
5640 * @mr: Pointer to MPT reply frame
5641 * @log_info: U32 LogInfo word from the IOC
5642 *
5643 * Refer to lsi/sp_log.h.
5644 */
5645 static void
5646 mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info)
5647 {
5648 u32 info = log_info & 0x00FF0000;
5649 char *desc = "unknown";
5650
5651 switch (info) {
5652 case 0x00010000:
5653 desc = "bug! MID not found";
5654 if (ioc->reload_fw == 0)
5655 ioc->reload_fw++;
5656 break;
5657
5658 case 0x00020000:
5659 desc = "Parity Error";
5660 break;
5661
5662 case 0x00030000:
5663 desc = "ASYNC Outbound Overrun";
5664 break;
5665
5666 case 0x00040000:
5667 desc = "SYNC Offset Error";
5668 break;
5669
5670 case 0x00050000:
5671 desc = "BM Change";
5672 break;
5673
5674 case 0x00060000:
5675 desc = "Msg In Overflow";
5676 break;
5677
5678 case 0x00070000:
5679 desc = "DMA Error";
5680 break;
5681
5682 case 0x00080000:
5683 desc = "Outbound DMA Overrun";
5684 break;
5685
5686 case 0x00090000:
5687 desc = "Task Management";
5688 break;
5689
5690 case 0x000A0000:
5691 desc = "Device Problem";
5692 break;
5693
5694 case 0x000B0000:
5695 desc = "Invalid Phase Change";
5696 break;
5697
5698 case 0x000C0000:
5699 desc = "Untagged Table Size";
5700 break;
5701
5702 }
5703
5704 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
5705 }
5706
5707 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5708 /*
5709 * mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC.
5710 * @ioc: Pointer to MPT_ADAPTER structure
5711 * @ioc_status: U32 IOCStatus word from IOC
5712 * @mf: Pointer to MPT request frame
5713 *
5714 * Refer to lsi/mpi.h.
5715 */
5716 static void
5717 mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
5718 {
5719 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
5720 char *desc = "";
5721
5722 switch (status) {
5723 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
5724 desc = "Invalid Function";
5725 break;
5726
5727 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
5728 desc = "Busy";
5729 break;
5730
5731 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
5732 desc = "Invalid SGL";
5733 break;
5734
5735 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
5736 desc = "Internal Error";
5737 break;
5738
5739 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
5740 desc = "Reserved";
5741 break;
5742
5743 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
5744 desc = "Insufficient Resources";
5745 break;
5746
5747 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
5748 desc = "Invalid Field";
5749 break;
5750
5751 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
5752 desc = "Invalid State";
5753 break;
5754
5755 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
5756 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
5757 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
5758 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
5759 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
5760 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
5761 /* No message for Config IOCStatus values */
5762 break;
5763
5764 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
5765 /* No message for recovered error
5766 desc = "SCSI Recovered Error";
5767 */
5768 break;
5769
5770 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
5771 desc = "SCSI Invalid Bus";
5772 break;
5773
5774 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
5775 desc = "SCSI Invalid TargetID";
5776 break;
5777
5778 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
5779 {
5780 SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
5781 U8 cdb = pScsiReq->CDB[0];
5782 if (cdb != 0x12) { /* Inquiry is issued for device scanning */
5783 desc = "SCSI Device Not There";
5784 }
5785 break;
5786 }
5787
5788 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
5789 desc = "SCSI Data Overrun";
5790 break;
5791
5792 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
5793 /* This error is checked in scsi_io_done(). Skip.
5794 desc = "SCSI Data Underrun";
5795 */
5796 break;
5797
5798 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
5799 desc = "SCSI I/O Data Error";
5800 break;
5801
5802 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
5803 desc = "SCSI Protocol Error";
5804 break;
5805
5806 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
5807 desc = "SCSI Task Terminated";
5808 break;
5809
5810 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
5811 desc = "SCSI Residual Mismatch";
5812 break;
5813
5814 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
5815 desc = "SCSI Task Management Failed";
5816 break;
5817
5818 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
5819 desc = "SCSI IOC Terminated";
5820 break;
5821
5822 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
5823 desc = "SCSI Ext Terminated";
5824 break;
5825
5826 default:
5827 desc = "Others";
5828 break;
5829 }
5830 if (desc != "")
5831 printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04x): %s\n", ioc->name, status, desc);
5832 }
5833
5834 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5835 EXPORT_SYMBOL(ioc_list);
5836 EXPORT_SYMBOL(mpt_proc_root_dir);
5837 EXPORT_SYMBOL(mpt_register);
5838 EXPORT_SYMBOL(mpt_deregister);
5839 EXPORT_SYMBOL(mpt_event_register);
5840 EXPORT_SYMBOL(mpt_event_deregister);
5841 EXPORT_SYMBOL(mpt_reset_register);
5842 EXPORT_SYMBOL(mpt_reset_deregister);
5843 EXPORT_SYMBOL(mpt_device_driver_register);
5844 EXPORT_SYMBOL(mpt_device_driver_deregister);
5845 EXPORT_SYMBOL(mpt_get_msg_frame);
5846 EXPORT_SYMBOL(mpt_put_msg_frame);
5847 EXPORT_SYMBOL(mpt_free_msg_frame);
5848 EXPORT_SYMBOL(mpt_add_sge);
5849 EXPORT_SYMBOL(mpt_send_handshake_request);
5850 EXPORT_SYMBOL(mpt_verify_adapter);
5851 EXPORT_SYMBOL(mpt_GetIocState);
5852 EXPORT_SYMBOL(mpt_print_ioc_summary);
5853 EXPORT_SYMBOL(mpt_lan_index);
5854 EXPORT_SYMBOL(mpt_stm_index);
5855 EXPORT_SYMBOL(mpt_HardResetHandler);
5856 EXPORT_SYMBOL(mpt_config);
5857 EXPORT_SYMBOL(mpt_toolbox);
5858 EXPORT_SYMBOL(mpt_findImVolumes);
5859 EXPORT_SYMBOL(mpt_read_ioc_pg_3);
5860 EXPORT_SYMBOL(mpt_alloc_fw_memory);
5861 EXPORT_SYMBOL(mpt_free_fw_memory);
5862
5863 static struct pci_driver mptbase_driver = {
5864 .name = "mptbase",
5865 .id_table = mptbase_pci_table,
5866 .probe = mptbase_probe,
5867 .remove = __devexit_p(mptbase_remove),
5868 .driver = {
5869 .shutdown = mptbase_shutdown,
5870 },
5871 #ifdef CONFIG_PM
5872 .suspend = mptbase_suspend,
5873 .resume = mptbase_resume,
5874 #endif
5875 };
5876
5877 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5878 /*
5879 * fusion_init - Fusion MPT base driver initialization routine.
5880 *
5881 * Returns 0 for success, non-zero for failure.
5882 */
5883 static int __init
5884 fusion_init(void)
5885 {
5886 int i;
5887 int r;
5888
5889 show_mptmod_ver(my_NAME, my_VERSION);
5890 printk(KERN_INFO COPYRIGHT "\n");
5891
5892 for (i = 0; i < MPT_MAX_PROTOCOL_DRIVERS; i++) {
5893 MptCallbacks[i] = NULL;
5894 MptDriverClass[i] = MPTUNKNOWN_DRIVER;
5895 MptEvHandlers[i] = NULL;
5896 MptResetHandlers[i] = NULL;
5897 }
5898
5899 /* NEW! 20010120 -sralston
5900 * Register ourselves (mptbase) in order to facilitate
5901 * EventNotification handling.
5902 */
5903 mpt_base_index = mpt_register(mpt_base_reply, MPTBASE_DRIVER);
5904
5905 /* Register for hard reset handling callbacks.
5906 */
5907 if (mpt_reset_register(mpt_base_index, mpt_ioc_reset) == 0) {
5908 dprintk((KERN_INFO MYNAM ": Register for IOC reset notification\n"));
5909 } else {
5910 /* FIXME! */
5911 }
5912
5913 #ifdef CONFIG_PROC_FS
5914 (void) procmpt_create();
5915 #endif
5916 r = pci_register_driver(&mptbase_driver);
5917 if(r)
5918 return(r);
5919
5920 return r;
5921 }
5922
5923 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5924 /*
5925 * fusion_exit - Perform driver unload cleanup.
5926 *
5927 * This routine frees all resources associated with each MPT adapter
5928 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
5929 */
5930 static void __exit
5931 fusion_exit(void)
5932 {
5933
5934 dexitprintk((KERN_INFO MYNAM ": fusion_exit() called!\n"));
5935
5936 pci_unregister_driver(&mptbase_driver);
5937 mpt_reset_deregister(mpt_base_index);
5938
5939 #ifdef CONFIG_PROC_FS
5940 procmpt_destroy();
5941 #endif
5942 }
5943
5944
5945 module_init(fusion_init);
5946 module_exit(fusion_exit);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree