Linux-2.6.12-rc2
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / media / dvb / frontends / dib3000mb_priv.h
blob57e61aa5b07b0b79da7cecc720effae549e4823a
1 /*
2 * dib3000mb_priv.h
4 * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@desy.de)
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation, version 2.
10 * for more information see dib3000mb.c .
13 #ifndef __DIB3000MB_PRIV_H_INCLUDED__
14 #define __DIB3000MB_PRIV_H_INCLUDED__
16 /* register addresses and some of their default values */
18 /* restart subsystems */
19 #define DIB3000MB_REG_RESTART ( 0)
21 #define DIB3000MB_RESTART_OFF ( 0)
22 #define DIB3000MB_RESTART_AUTO_SEARCH (1 << 1)
23 #define DIB3000MB_RESTART_CTRL (1 << 2)
24 #define DIB3000MB_RESTART_AGC (1 << 3)
26 /* FFT size */
27 #define DIB3000MB_REG_FFT ( 1)
29 /* Guard time */
30 #define DIB3000MB_REG_GUARD_TIME ( 2)
32 /* QAM */
33 #define DIB3000MB_REG_QAM ( 3)
35 /* Alpha coefficient high priority Viterbi algorithm */
36 #define DIB3000MB_REG_VIT_ALPHA ( 4)
38 /* spectrum inversion */
39 #define DIB3000MB_REG_DDS_INV ( 5)
41 /* DDS frequency value (IF position) ad ? values don't match reg_3000mb.txt */
42 #define DIB3000MB_REG_DDS_FREQ_MSB ( 6)
43 #define DIB3000MB_REG_DDS_FREQ_LSB ( 7)
44 #define DIB3000MB_DDS_FREQ_MSB ( 178)
45 #define DIB3000MB_DDS_FREQ_LSB ( 8990)
47 /* timing frequency (carrier spacing) */
48 static u16 dib3000mb_reg_timing_freq[] = { 8,9 };
49 static u16 dib3000mb_timing_freq[][2] = {
50 { 126 , 48873 }, /* 6 MHz */
51 { 147 , 57019 }, /* 7 MHz */
52 { 168 , 65164 }, /* 8 MHz */
55 /* impulse noise parameter */
56 /* 36 ??? */
58 static u16 dib3000mb_reg_impulse_noise[] = { 10,11,12,15,36 };
60 enum dib3000mb_impulse_noise_type {
61 DIB3000MB_IMPNOISE_OFF,
62 DIB3000MB_IMPNOISE_MOBILE,
63 DIB3000MB_IMPNOISE_FIXED,
64 DIB3000MB_IMPNOISE_DEFAULT
67 static u16 dib3000mb_impulse_noise_values[][5] = {
68 { 0x0000, 0x0004, 0x0014, 0x01ff, 0x0399 }, /* off */
69 { 0x0001, 0x0004, 0x0014, 0x01ff, 0x037b }, /* mobile */
70 { 0x0001, 0x0004, 0x0020, 0x01bd, 0x0399 }, /* fixed */
71 { 0x0000, 0x0002, 0x000a, 0x01ff, 0x0399 }, /* default */
75 * Dual Automatic-Gain-Control
76 * - gains RF in tuner (AGC1)
77 * - gains IF after filtering (AGC2)
80 /* also from 16 to 18 */
81 static u16 dib3000mb_reg_agc_gain[] = {
82 19,20,21,22,23,24,25,26,27,28,29,30,31,32
85 static u16 dib3000mb_default_agc_gain[] =
86 { 0x0001, 52429, 623, 128, 166, 195, 61, /* RF ??? */
87 0x0001, 53766, 38011, 0, 90, 33, 23 }; /* IF ??? */
89 /* phase noise */
90 /* 36 is set when setting the impulse noise */
91 static u16 dib3000mb_reg_phase_noise[] = { 33,34,35,37,38 };
93 static u16 dib3000mb_default_noise_phase[] = { 2, 544, 0, 5, 4 };
95 /* lock duration */
96 static u16 dib3000mb_reg_lock_duration[] = { 39,40 };
97 static u16 dib3000mb_default_lock_duration[] = { 135, 135 };
99 /* AGC loop bandwidth */
100 static u16 dib3000mb_reg_agc_bandwidth[] = { 43,44,45,46,47,48,49,50 };
102 static u16 dib3000mb_agc_bandwidth_low[] =
103 { 2088, 10, 2088, 10, 3448, 5, 3448, 5 };
104 static u16 dib3000mb_agc_bandwidth_high[] =
105 { 2349, 5, 2349, 5, 2586, 2, 2586, 2 };
108 * lock0 definition (coff_lock)
110 #define DIB3000MB_REG_LOCK0_MASK ( 51)
111 #define DIB3000MB_LOCK0_DEFAULT ( 4)
114 * lock1 definition (cpil_lock)
115 * for auto search
116 * which values hide behind the lock masks
118 #define DIB3000MB_REG_LOCK1_MASK ( 52)
119 #define DIB3000MB_LOCK1_SEARCH_4 (0x0004)
120 #define DIB3000MB_LOCK1_SEARCH_2048 (0x0800)
121 #define DIB3000MB_LOCK1_DEFAULT (0x0001)
124 * lock2 definition (fec_lock) */
125 #define DIB3000MB_REG_LOCK2_MASK ( 53)
126 #define DIB3000MB_LOCK2_DEFAULT (0x0080)
129 * SEQ ? what was that again ... :)
130 * changes when, inversion, guard time and fft is
131 * either automatically detected or not
133 #define DIB3000MB_REG_SEQ ( 54)
135 /* bandwidth */
136 static u16 dib3000mb_reg_bandwidth[] = { 55,56,57,58,59,60,61,62,63,64,65,66,67 };
137 static u16 dib3000mb_bandwidth_6mhz[] =
138 { 0, 33, 53312, 112, 46635, 563, 36565, 0, 1000, 0, 1010, 1, 45264 };
140 static u16 dib3000mb_bandwidth_7mhz[] =
141 { 0, 28, 64421, 96, 39973, 483, 3255, 0, 1000, 0, 1010, 1, 45264 };
143 static u16 dib3000mb_bandwidth_8mhz[] =
144 { 0, 25, 23600, 84, 34976, 422, 43808, 0, 1000, 0, 1010, 1, 45264 };
146 #define DIB3000MB_REG_UNK_68 ( 68)
147 #define DIB3000MB_UNK_68 ( 0)
149 #define DIB3000MB_REG_UNK_69 ( 69)
150 #define DIB3000MB_UNK_69 ( 0)
152 #define DIB3000MB_REG_UNK_71 ( 71)
153 #define DIB3000MB_UNK_71 ( 0)
155 #define DIB3000MB_REG_UNK_77 ( 77)
156 #define DIB3000MB_UNK_77 ( 6)
158 #define DIB3000MB_REG_UNK_78 ( 78)
159 #define DIB3000MB_UNK_78 (0x0080)
161 /* isi */
162 #define DIB3000MB_REG_ISI ( 79)
163 #define DIB3000MB_ISI_ACTIVATE ( 0)
164 #define DIB3000MB_ISI_INHIBIT ( 1)
166 /* sync impovement */
167 #define DIB3000MB_REG_SYNC_IMPROVEMENT ( 84)
168 #define DIB3000MB_SYNC_IMPROVE_2K_1_8 ( 3)
169 #define DIB3000MB_SYNC_IMPROVE_DEFAULT ( 0)
171 /* phase noise compensation inhibition */
172 #define DIB3000MB_REG_PHASE_NOISE ( 87)
173 #define DIB3000MB_PHASE_NOISE_DEFAULT ( 0)
175 #define DIB3000MB_REG_UNK_92 ( 92)
176 #define DIB3000MB_UNK_92 (0x0080)
178 #define DIB3000MB_REG_UNK_96 ( 96)
179 #define DIB3000MB_UNK_96 (0x0010)
181 #define DIB3000MB_REG_UNK_97 ( 97)
182 #define DIB3000MB_UNK_97 (0x0009)
184 /* mobile mode ??? */
185 #define DIB3000MB_REG_MOBILE_MODE ( 101)
186 #define DIB3000MB_MOBILE_MODE_ON ( 1)
187 #define DIB3000MB_MOBILE_MODE_OFF ( 0)
189 #define DIB3000MB_REG_UNK_106 ( 106)
190 #define DIB3000MB_UNK_106 (0x0080)
192 #define DIB3000MB_REG_UNK_107 ( 107)
193 #define DIB3000MB_UNK_107 (0x0080)
195 #define DIB3000MB_REG_UNK_108 ( 108)
196 #define DIB3000MB_UNK_108 (0x0080)
198 /* fft */
199 #define DIB3000MB_REG_UNK_121 ( 121)
200 #define DIB3000MB_UNK_121_2K ( 7)
201 #define DIB3000MB_UNK_121_DEFAULT ( 5)
203 #define DIB3000MB_REG_UNK_122 ( 122)
204 #define DIB3000MB_UNK_122 ( 2867)
206 /* QAM for mobile mode */
207 #define DIB3000MB_REG_MOBILE_MODE_QAM ( 126)
208 #define DIB3000MB_MOBILE_MODE_QAM_64 ( 3)
209 #define DIB3000MB_MOBILE_MODE_QAM_QPSK_16 ( 1)
210 #define DIB3000MB_MOBILE_MODE_QAM_OFF ( 0)
213 * data diversity when having more than one chip on-board
214 * see also DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY
216 #define DIB3000MB_REG_DATA_IN_DIVERSITY ( 127)
217 #define DIB3000MB_DATA_DIVERSITY_IN_OFF ( 0)
218 #define DIB3000MB_DATA_DIVERSITY_IN_ON ( 2)
220 /* vit hrch */
221 #define DIB3000MB_REG_VIT_HRCH ( 128)
223 /* vit code rate */
224 #define DIB3000MB_REG_VIT_CODE_RATE ( 129)
226 /* vit select hp */
227 #define DIB3000MB_REG_VIT_HP ( 130)
229 /* time frame for Bit-Error-Rate calculation */
230 #define DIB3000MB_REG_BERLEN ( 135)
231 #define DIB3000MB_BERLEN_LONG ( 0)
232 #define DIB3000MB_BERLEN_DEFAULT ( 1)
233 #define DIB3000MB_BERLEN_MEDIUM ( 2)
234 #define DIB3000MB_BERLEN_SHORT ( 3)
236 /* 142 - 152 FIFO parameters
237 * which is what ?
240 #define DIB3000MB_REG_FIFO_142 ( 142)
241 #define DIB3000MB_FIFO_142 ( 0)
243 /* MPEG2 TS output mode */
244 #define DIB3000MB_REG_MPEG2_OUT_MODE ( 143)
245 #define DIB3000MB_MPEG2_OUT_MODE_204 ( 0)
246 #define DIB3000MB_MPEG2_OUT_MODE_188 ( 1)
248 #define DIB3000MB_REG_PID_PARSE ( 144)
249 #define DIB3000MB_PID_PARSE_INHIBIT ( 0)
250 #define DIB3000MB_PID_PARSE_ACTIVATE ( 1)
252 #define DIB3000MB_REG_FIFO ( 145)
253 #define DIB3000MB_FIFO_INHIBIT ( 1)
254 #define DIB3000MB_FIFO_ACTIVATE ( 0)
256 #define DIB3000MB_REG_FIFO_146 ( 146)
257 #define DIB3000MB_FIFO_146 ( 3)
259 #define DIB3000MB_REG_FIFO_147 ( 147)
260 #define DIB3000MB_FIFO_147 (0x0100)
263 * pidfilter
264 * it is not a hardware pidfilter but a filter which drops all pids
265 * except the ones set. Necessary because of the limited USB1.1 bandwidth.
266 * regs 153-168
269 #define DIB3000MB_REG_FIRST_PID ( 153)
270 #define DIB3000MB_NUM_PIDS ( 16)
273 * output mode
274 * USB devices have to use 'slave'-mode
275 * see also DIB3000MB_REG_ELECT_OUT_MODE
277 #define DIB3000MB_REG_OUTPUT_MODE ( 169)
278 #define DIB3000MB_OUTPUT_MODE_GATED_CLK ( 0)
279 #define DIB3000MB_OUTPUT_MODE_CONT_CLK ( 1)
280 #define DIB3000MB_OUTPUT_MODE_SERIAL ( 2)
281 #define DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY ( 5)
282 #define DIB3000MB_OUTPUT_MODE_SLAVE ( 6)
284 /* irq event mask */
285 #define DIB3000MB_REG_IRQ_EVENT_MASK ( 170)
286 #define DIB3000MB_IRQ_EVENT_MASK ( 0)
288 /* filter coefficients */
289 static u16 dib3000mb_reg_filter_coeffs[] = {
290 171, 172, 173, 174, 175, 176, 177, 178,
291 179, 180, 181, 182, 183, 184, 185, 186,
292 188, 189, 190, 191, 192, 194
295 static u16 dib3000mb_filter_coeffs[] = {
296 226, 160, 29,
297 979, 998, 19,
298 22, 1019, 1006,
299 1022, 12, 6,
300 1017, 1017, 3,
301 6, 1019,
302 1021, 2, 3,
303 1, 0,
307 * mobile algorithm (when you are moving with your device)
308 * but not faster than 90 km/h
310 #define DIB3000MB_REG_MOBILE_ALGO ( 195)
311 #define DIB3000MB_MOBILE_ALGO_ON ( 0)
312 #define DIB3000MB_MOBILE_ALGO_OFF ( 1)
314 /* multiple demodulators algorithm */
315 #define DIB3000MB_REG_MULTI_DEMOD_MSB ( 206)
316 #define DIB3000MB_REG_MULTI_DEMOD_LSB ( 207)
318 /* terminator, no more demods */
319 #define DIB3000MB_MULTI_DEMOD_MSB ( 32767)
320 #define DIB3000MB_MULTI_DEMOD_LSB ( 4095)
322 /* bring the device into a known */
323 #define DIB3000MB_REG_RESET_DEVICE ( 1024)
324 #define DIB3000MB_RESET_DEVICE (0x812c)
325 #define DIB3000MB_RESET_DEVICE_RST ( 0)
327 /* hardware clock configuration */
328 #define DIB3000MB_REG_CLOCK ( 1027)
329 #define DIB3000MB_CLOCK_DEFAULT (0x9000)
330 #define DIB3000MB_CLOCK_DIVERSITY (0x92b0)
332 /* power down config */
333 #define DIB3000MB_REG_POWER_CONTROL ( 1028)
334 #define DIB3000MB_POWER_DOWN ( 1)
335 #define DIB3000MB_POWER_UP ( 0)
337 /* electrical output mode */
338 #define DIB3000MB_REG_ELECT_OUT_MODE ( 1029)
339 #define DIB3000MB_ELECT_OUT_MODE_OFF ( 0)
340 #define DIB3000MB_ELECT_OUT_MODE_ON ( 1)
342 /* set the tuner i2c address */
343 #define DIB3000MB_REG_TUNER ( 1089)
345 /* monitoring registers (read only) */
347 /* agc loop locked (size: 1) */
348 #define DIB3000MB_REG_AGC_LOCK ( 324)
350 /* agc power (size: 16) */
351 #define DIB3000MB_REG_AGC_POWER ( 325)
353 /* agc1 value (16) */
354 #define DIB3000MB_REG_AGC1_VALUE ( 326)
356 /* agc2 value (16) */
357 #define DIB3000MB_REG_AGC2_VALUE ( 327)
359 /* total RF power (16), can be used for signal strength */
360 #define DIB3000MB_REG_RF_POWER ( 328)
362 /* dds_frequency with offset (24) */
363 #define DIB3000MB_REG_DDS_VALUE_MSB ( 339)
364 #define DIB3000MB_REG_DDS_VALUE_LSB ( 340)
366 /* timing offset signed (24) */
367 #define DIB3000MB_REG_TIMING_OFFSET_MSB ( 341)
368 #define DIB3000MB_REG_TIMING_OFFSET_LSB ( 342)
370 /* fft start position (13) */
371 #define DIB3000MB_REG_FFT_WINDOW_POS ( 353)
373 /* carriers locked (1) */
374 #define DIB3000MB_REG_CARRIER_LOCK ( 355)
376 /* noise power (24) */
377 #define DIB3000MB_REG_NOISE_POWER_MSB ( 372)
378 #define DIB3000MB_REG_NOISE_POWER_LSB ( 373)
380 #define DIB3000MB_REG_MOBILE_NOISE_MSB ( 374)
381 #define DIB3000MB_REG_MOBILE_NOISE_LSB ( 375)
384 * signal power (16), this and the above can be
385 * used to calculate the signal/noise - ratio
387 #define DIB3000MB_REG_SIGNAL_POWER ( 380)
389 /* mer (24) */
390 #define DIB3000MB_REG_MER_MSB ( 381)
391 #define DIB3000MB_REG_MER_LSB ( 382)
394 * Transmission Parameter Signalling (TPS)
395 * the following registers can be used to get TPS-information.
396 * The values are according to the DVB-T standard.
399 /* TPS locked (1) */
400 #define DIB3000MB_REG_TPS_LOCK ( 394)
402 /* QAM from TPS (2) (values according to DIB3000MB_REG_QAM) */
403 #define DIB3000MB_REG_TPS_QAM ( 398)
405 /* hierarchy from TPS (1) */
406 #define DIB3000MB_REG_TPS_HRCH ( 399)
408 /* alpha from TPS (3) (values according to DIB3000MB_REG_VIT_ALPHA) */
409 #define DIB3000MB_REG_TPS_VIT_ALPHA ( 400)
411 /* code rate high priority from TPS (3) (values according to DIB3000MB_FEC_*) */
412 #define DIB3000MB_REG_TPS_CODE_RATE_HP ( 401)
414 /* code rate low priority from TPS (3) if DIB3000MB_REG_TPS_VIT_ALPHA */
415 #define DIB3000MB_REG_TPS_CODE_RATE_LP ( 402)
417 /* guard time from TPS (2) (values according to DIB3000MB_REG_GUARD_TIME */
418 #define DIB3000MB_REG_TPS_GUARD_TIME ( 403)
420 /* fft size from TPS (2) (values according to DIB3000MB_REG_FFT) */
421 #define DIB3000MB_REG_TPS_FFT ( 404)
423 /* cell id from TPS (16) */
424 #define DIB3000MB_REG_TPS_CELL_ID ( 406)
426 /* TPS (68) */
427 #define DIB3000MB_REG_TPS_1 ( 408)
428 #define DIB3000MB_REG_TPS_2 ( 409)
429 #define DIB3000MB_REG_TPS_3 ( 410)
430 #define DIB3000MB_REG_TPS_4 ( 411)
431 #define DIB3000MB_REG_TPS_5 ( 412)
433 /* bit error rate (before RS correction) (21) */
434 #define DIB3000MB_REG_BER_MSB ( 414)
435 #define DIB3000MB_REG_BER_LSB ( 415)
437 /* packet error rate (uncorrected TS packets) (16) */
438 #define DIB3000MB_REG_PACKET_ERROR_RATE ( 417)
440 /* uncorrected packet count (16) */
441 #define DIB3000MB_REG_UNC ( 420)
443 /* viterbi locked (1) */
444 #define DIB3000MB_REG_VIT_LCK ( 421)
446 /* viterbi inidcator (16) */
447 #define DIB3000MB_REG_VIT_INDICATOR ( 422)
449 /* transport stream sync lock (1) */
450 #define DIB3000MB_REG_TS_SYNC_LOCK ( 423)
452 /* transport stream RS lock (1) */
453 #define DIB3000MB_REG_TS_RS_LOCK ( 424)
455 /* lock mask 0 value (1) */
456 #define DIB3000MB_REG_LOCK0_VALUE ( 425)
458 /* lock mask 1 value (1) */
459 #define DIB3000MB_REG_LOCK1_VALUE ( 426)
461 /* lock mask 2 value (1) */
462 #define DIB3000MB_REG_LOCK2_VALUE ( 427)
464 /* interrupt pending for auto search */
465 #define DIB3000MB_REG_AS_IRQ_PENDING ( 434)
467 #endif