drivers/ieee1394/sbp2.h

   1 /*
   2  * sbp2.h - Defines and prototypes for sbp2.c
   3  *
   4  * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com)
   5  * jamesg@filanet.com
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software Foundation,
  19  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  20  */
  21
  22 #ifndef SBP2_H
  23 #define SBP2_H
  24
  25 #define SBP2_DEVICE_NAME                "sbp2"
  26
  27 /*
  28  * SBP2 specific structures and defines
  29  */
  30
  31 #define ORB_DIRECTION_WRITE_TO_MEDIA    0x0
  32 #define ORB_DIRECTION_READ_FROM_MEDIA   0x1
  33 #define ORB_DIRECTION_NO_DATA_TRANSFER  0x2
  34
  35 #define ORB_SET_NULL_PTR(value)                 ((value & 0x1) << 31)
  36 #define ORB_SET_NOTIFY(value)                   ((value & 0x1) << 31)
  37 #define ORB_SET_RQ_FMT(value)                   ((value & 0x3) << 29)   /* unused ? */
  38 #define ORB_SET_NODE_ID(value)                  ((value & 0xffff) << 16)
  39 #define ORB_SET_DATA_SIZE(value)                (value & 0xffff)
  40 #define ORB_SET_PAGE_SIZE(value)                ((value & 0x7) << 16)
  41 #define ORB_SET_PAGE_TABLE_PRESENT(value)       ((value & 0x1) << 19)
  42 #define ORB_SET_MAX_PAYLOAD(value)              ((value & 0xf) << 20)
  43 #define ORB_SET_SPEED(value)                    ((value & 0x7) << 24)
  44 #define ORB_SET_DIRECTION(value)                ((value & 0x1) << 27)
  45
  46 struct sbp2_command_orb {
  47         volatile u32 next_ORB_hi;
  48         volatile u32 next_ORB_lo;
  49         u32 data_descriptor_hi;
  50         u32 data_descriptor_lo;
  51         u32 misc;
  52         u8 cdb[12];
  53 };
  54
  55 #define SBP2_LOGIN_REQUEST              0x0
  56 #define SBP2_QUERY_LOGINS_REQUEST       0x1
  57 #define SBP2_RECONNECT_REQUEST          0x3
  58 #define SBP2_SET_PASSWORD_REQUEST       0x4
  59 #define SBP2_LOGOUT_REQUEST             0x7
  60 #define SBP2_ABORT_TASK_REQUEST         0xb
  61 #define SBP2_ABORT_TASK_SET             0xc
  62 #define SBP2_LOGICAL_UNIT_RESET         0xe
  63 #define SBP2_TARGET_RESET_REQUEST       0xf
  64
  65 #define ORB_SET_LUN(value)                      (value & 0xffff)
  66 #define ORB_SET_FUNCTION(value)                 ((value & 0xf) << 16)
  67 #define ORB_SET_RECONNECT(value)                ((value & 0xf) << 20)
  68 #define ORB_SET_EXCLUSIVE(value)                ((value & 0x1) << 28)
  69 #define ORB_SET_LOGIN_RESP_LENGTH(value)        (value & 0xffff)
  70 #define ORB_SET_PASSWD_LENGTH(value)            ((value & 0xffff) << 16)
  71
  72 struct sbp2_login_orb {
  73         u32 password_hi;
  74         u32 password_lo;
  75         u32 login_response_hi;
  76         u32 login_response_lo;
  77         u32 lun_misc;
  78         u32 passwd_resp_lengths;
  79         u32 status_FIFO_hi;
  80         u32 status_FIFO_lo;
  81 };
  82
  83 #define RESPONSE_GET_LOGIN_ID(value)            (value & 0xffff)
  84 #define RESPONSE_GET_LENGTH(value)              ((value >> 16) & 0xffff)
  85 #define RESPONSE_GET_RECONNECT_HOLD(value)      (value & 0xffff)
  86
  87 struct sbp2_login_response {
  88         u32 length_login_ID;
  89         u32 command_block_agent_hi;
  90         u32 command_block_agent_lo;
  91         u32 reconnect_hold;
  92 };
  93
  94 #define ORB_SET_LOGIN_ID(value)                 (value & 0xffff)
  95
  96 #define ORB_SET_QUERY_LOGINS_RESP_LENGTH(value) (value & 0xffff)
  97
  98 struct sbp2_query_logins_orb {
  99         u32 reserved1;
 100         u32 reserved2;
 101         u32 query_response_hi;
 102         u32 query_response_lo;
 103         u32 lun_misc;
 104         u32 reserved_resp_length;
 105         u32 status_FIFO_hi;
 106         u32 status_FIFO_lo;
 107 };
 108
 109 #define RESPONSE_GET_MAX_LOGINS(value)          (value & 0xffff)
 110 #define RESPONSE_GET_ACTIVE_LOGINS(value)       ((RESPONSE_GET_LENGTH(value) - 4) / 12)
 111
 112 struct sbp2_query_logins_response {
 113         u32 length_max_logins;
 114         u32 misc_IDs;
 115         u32 initiator_misc_hi;
 116         u32 initiator_misc_lo;
 117 };
 118
 119 struct sbp2_reconnect_orb {
 120         u32 reserved1;
 121         u32 reserved2;
 122         u32 reserved3;
 123         u32 reserved4;
 124         u32 login_ID_misc;
 125         u32 reserved5;
 126         u32 status_FIFO_hi;
 127         u32 status_FIFO_lo;
 128 };
 129
 130 struct sbp2_logout_orb {
 131         u32 reserved1;
 132         u32 reserved2;
 133         u32 reserved3;
 134         u32 reserved4;
 135         u32 login_ID_misc;
 136         u32 reserved5;
 137         u32 status_FIFO_hi;
 138         u32 status_FIFO_lo;
 139 };
 140
 141 #define PAGE_TABLE_SET_SEGMENT_BASE_HI(value)   (value & 0xffff)
 142 #define PAGE_TABLE_SET_SEGMENT_LENGTH(value)    ((value & 0xffff) << 16)
 143
 144 struct sbp2_unrestricted_page_table {
 145         u32 length_segment_base_hi;
 146         u32 segment_base_lo;
 147 };
 148
 149 #define RESP_STATUS_REQUEST_COMPLETE            0x0
 150 #define RESP_STATUS_TRANSPORT_FAILURE           0x1
 151 #define RESP_STATUS_ILLEGAL_REQUEST             0x2
 152 #define RESP_STATUS_VENDOR_DEPENDENT            0x3
 153
 154 #define SBP2_STATUS_NO_ADDITIONAL_INFO          0x0
 155 #define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED      0x1
 156 #define SBP2_STATUS_SPEED_NOT_SUPPORTED         0x2
 157 #define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED     0x3
 158 #define SBP2_STATUS_ACCESS_DENIED               0x4
 159 #define SBP2_STATUS_LU_NOT_SUPPORTED            0x5
 160 #define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL       0x6
 161 #define SBP2_STATUS_RESOURCES_UNAVAILABLE       0x8
 162 #define SBP2_STATUS_FUNCTION_REJECTED           0x9
 163 #define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED     0xa
 164 #define SBP2_STATUS_DUMMY_ORB_COMPLETED         0xb
 165 #define SBP2_STATUS_REQUEST_ABORTED             0xc
 166 #define SBP2_STATUS_UNSPECIFIED_ERROR           0xff
 167
 168 #define SFMT_CURRENT_ERROR                      0x0
 169 #define SFMT_DEFERRED_ERROR                     0x1
 170 #define SFMT_VENDOR_DEPENDENT_STATUS            0x3
 171
 172 #define SBP2_SCSI_STATUS_GOOD                   0x0
 173 #define SBP2_SCSI_STATUS_CHECK_CONDITION        0x2
 174 #define SBP2_SCSI_STATUS_CONDITION_MET          0x4
 175 #define SBP2_SCSI_STATUS_BUSY                   0x8
 176 #define SBP2_SCSI_STATUS_RESERVATION_CONFLICT   0x18
 177 #define SBP2_SCSI_STATUS_COMMAND_TERMINATED     0x22
 178
 179 #define SBP2_SCSI_STATUS_SELECTION_TIMEOUT      0xff
 180
 181 #define STATUS_GET_ORB_OFFSET_HI(value)         (value & 0xffff)
 182 #define STATUS_GET_SBP_STATUS(value)            ((value >> 16) & 0xff)
 183 #define STATUS_GET_LENGTH(value)                ((value >> 24) & 0x7)
 184 #define STATUS_GET_DEAD_BIT(value)              ((value >> 27) & 0x1)
 185 #define STATUS_GET_RESP(value)                  ((value >> 28) & 0x3)
 186 #define STATUS_GET_SRC(value)                   ((value >> 30) & 0x3)
 187
 188 struct sbp2_status_block {
 189         u32 ORB_offset_hi_misc;
 190         u32 ORB_offset_lo;
 191         u8 command_set_dependent[24];
 192 };
 193
 194 /*
 195  * Miscellaneous SBP2 related config rom defines
 196  */
 197
 198 /* The status fifo address definition below is used as a base for each
 199  * node, which a chunk seperately assigned to each unit directory in the
 200  * node.  For example, 0xfffe00000000ULL is used for the first sbp2 device
 201  * detected on node 0, 0xfffe00000020ULL for the next sbp2 device on node
 202  * 0, and so on.
 203  *
 204  * Note: We could use a single status fifo address for all sbp2 devices,
 205  * and figure out which sbp2 device the status belongs to by looking at
 206  * the source node id of the status write... but, using separate addresses
 207  * for each sbp2 unit directory allows for better code and the ability to
 208  * support multiple luns within a single 1394 node.
 209  *
 210  * Also note that we choose the address range below as it is a region
 211  * specified for write posting, where the ohci controller will
 212  * automatically send an ack_complete when the status is written by the
 213  * sbp2 device... saving a split transaction.   =)
 214  */
 215 #define SBP2_STATUS_FIFO_ADDRESS                                0xfffe00000000ULL
 216 #define SBP2_STATUS_FIFO_ADDRESS_HI                             0xfffe
 217 #define SBP2_STATUS_FIFO_ADDRESS_LO                             0x0
 218
 219 #define SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(entry)                 ((entry) << 5)
 220 #define SBP2_STATUS_FIFO_OFFSET_TO_ENTRY(offset)                ((offset) >> 5)
 221
 222 #define SBP2_UNIT_DIRECTORY_OFFSET_KEY                          0xd1
 223 #define SBP2_CSR_OFFSET_KEY                                     0x54
 224 #define SBP2_UNIT_SPEC_ID_KEY                                   0x12
 225 #define SBP2_UNIT_SW_VERSION_KEY                                0x13
 226 #define SBP2_COMMAND_SET_SPEC_ID_KEY                            0x38
 227 #define SBP2_COMMAND_SET_KEY                                    0x39
 228 #define SBP2_UNIT_CHARACTERISTICS_KEY                           0x3a
 229 #define SBP2_DEVICE_TYPE_AND_LUN_KEY                            0x14
 230 #define SBP2_FIRMWARE_REVISION_KEY                              0x3c
 231
 232 #define SBP2_DEVICE_TYPE(q)                                     (((q) >> 16) & 0x1f)
 233 #define SBP2_DEVICE_LUN(q)                                      ((q) & 0xffff)
 234
 235 #define SBP2_AGENT_STATE_OFFSET                                 0x00ULL
 236 #define SBP2_AGENT_RESET_OFFSET                                 0x04ULL
 237 #define SBP2_ORB_POINTER_OFFSET                                 0x08ULL
 238 #define SBP2_DOORBELL_OFFSET                                    0x10ULL
 239 #define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET                   0x14ULL
 240 #define SBP2_UNSOLICITED_STATUS_VALUE                           0xf
 241
 242 #define SBP2_BUSY_TIMEOUT_ADDRESS                               0xfffff0000210ULL
 243 #define SBP2_BUSY_TIMEOUT_VALUE                                 0xf
 244
 245 #define SBP2_AGENT_RESET_DATA                                   0xf
 246
 247 /*
 248  * Unit spec id and sw version entry for SBP-2 devices
 249  */
 250
 251 #define SBP2_UNIT_SPEC_ID_ENTRY                                 0x0000609e
 252 #define SBP2_SW_VERSION_ENTRY                                   0x00010483
 253
 254 /*
 255  * Other misc defines
 256  */
 257 #define SBP2_128KB_BROKEN_FIRMWARE                              0xa0b800
 258
 259 #define SBP2_DEVICE_TYPE_LUN_UNINITIALIZED                      0xffffffff
 260
 261 /*
 262  * SCSI specific stuff
 263  */
 264
 265 #define SBP2_MAX_SG_ELEMENT_LENGTH      0xf000
 266 #define SBP2_MAX_UDS_PER_NODE           16      /* Maximum scsi devices per node */
 267 #define SBP2_MAX_SECTORS                255     /* Max sectors supported */
 268
 269 #ifndef TYPE_SDAD
 270 #define TYPE_SDAD                       0x0e    /* simplified direct access device */
 271 #endif
 272
 273 /*
 274  * SCSI direction table...
 275  * (now used as a back-up in case the direction passed down from above is "unknown")
 276  *
 277  * DIN = IN data direction
 278  * DOU = OUT data direction
 279  * DNO = No data transfer
 280  * DUN = Unknown data direction
 281  *
 282  * Opcode 0xec (Teac specific "opc execute") possibly should be DNO,
 283  * but we'll change it when somebody reports a problem with this.
 284  */
 285 #define DIN                             ORB_DIRECTION_READ_FROM_MEDIA
 286 #define DOU                             ORB_DIRECTION_WRITE_TO_MEDIA
 287 #define DNO                             ORB_DIRECTION_NO_DATA_TRANSFER
 288 #define DUN                             DIN
 289
 290 static unchar sbp2scsi_direction_table[0x100] = {
 291         DNO,DNO,DIN,DIN,DOU,DIN,DIN,DOU,DIN,DUN,DOU,DOU,DUN,DUN,DUN,DIN,
 292         DNO,DIN,DIN,DOU,DIN,DOU,DNO,DNO,DOU,DNO,DIN,DNO,DIN,DOU,DNO,DUN,
 293         DIN,DUN,DIN,DIN,DOU,DIN,DUN,DUN,DIN,DIN,DOU,DNO,DUN,DIN,DOU,DOU,
 294         DOU,DOU,DOU,DNO,DIN,DNO,DNO,DIN,DOU,DOU,DOU,DOU,DIN,DOU,DIN,DOU,
 295         DOU,DOU,DIN,DIN,DIN,DNO,DIN,DNO,DNO,DNO,DUN,DNO,DOU,DIN,DNO,DUN,
 296         DUN,DIN,DIN,DNO,DNO,DOU,DUN,DUN,DNO,DIN,DIN,DNO,DIN,DOU,DUN,DUN,
 297         DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
 298         DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
 299         DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
 300         DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
 301         DUN,DNO,DOU,DOU,DIN,DNO,DNO,DNO,DIN,DNO,DOU,DUN,DNO,DIN,DOU,DOU,
 302         DOU,DOU,DOU,DNO,DUN,DIN,DOU,DIN,DIN,DIN,DNO,DNO,DNO,DIN,DIN,DUN,
 303         DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
 304         DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,
 305         DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DOU,DUN,DUN,DUN,DUN,DUN,
 306         DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN
 307 };
 308
 309 /* This should be safe */
 310 #define SBP2_MAX_CMDS           8
 311
 312 /* This is the two dma types we use for cmd_dma below */
 313 enum cmd_dma_types {
 314         CMD_DMA_NONE,
 315         CMD_DMA_PAGE,
 316         CMD_DMA_SINGLE
 317 };
 318
 319 /*
 320  * Encapsulates all the info necessary for an outstanding command.
 321  */
 322 struct sbp2_command_info {
 323
 324         struct list_head list;
 325         struct sbp2_command_orb command_orb ____cacheline_aligned;
 326         dma_addr_t command_orb_dma ____cacheline_aligned;
 327         struct scsi_cmnd *Current_SCpnt;
 328         void (*Current_done)(struct scsi_cmnd *);
 329
 330         /* Also need s/g structure for each sbp2 command */
 331         struct sbp2_unrestricted_page_table scatter_gather_element[SG_ALL] ____cacheline_aligned;
 332         dma_addr_t sge_dma ____cacheline_aligned;
 333         void *sge_buffer;
 334         dma_addr_t cmd_dma;
 335         enum cmd_dma_types dma_type;
 336         unsigned long dma_size;
 337         int dma_dir;
 338
 339 };
 340
 341 /* A list of flags for detected oddities and brokeness. */
 342 #define SBP2_BREAKAGE_128K_MAX_TRANSFER         0x1
 343 #define SBP2_BREAKAGE_INQUIRY_HACK              0x2
 344
 345
 346 struct sbp2scsi_host_info;
 347
 348
 349 /*
 350  * Information needed on a per scsi id basis (one for each sbp2 device)
 351  */
 352 struct scsi_id_instance_data {
 353         /*
 354          * Various sbp2 specific structures
 355          */
 356         struct sbp2_command_orb *last_orb;
 357         dma_addr_t last_orb_dma;
 358         struct sbp2_login_orb *login_orb;
 359         dma_addr_t login_orb_dma;
 360         struct sbp2_login_response *login_response;
 361         dma_addr_t login_response_dma;
 362         struct sbp2_query_logins_orb *query_logins_orb;
 363         dma_addr_t query_logins_orb_dma;
 364         struct sbp2_query_logins_response *query_logins_response;
 365         dma_addr_t query_logins_response_dma;
 366         struct sbp2_reconnect_orb *reconnect_orb;
 367         dma_addr_t reconnect_orb_dma;
 368         struct sbp2_logout_orb *logout_orb;
 369         dma_addr_t logout_orb_dma;
 370         struct sbp2_status_block status_block;
 371
 372         /*
 373          * Stuff we need to know about the sbp2 device itself
 374          */
 375         u64 sbp2_management_agent_addr;
 376         u64 sbp2_command_block_agent_addr;
 377         u32 speed_code;
 378         u32 max_payload_size;
 379
 380         /*
 381          * Values pulled from the device's unit directory
 382          */
 383         u32 sbp2_command_set_spec_id;
 384         u32 sbp2_command_set;
 385         u32 sbp2_unit_characteristics;
 386         u32 sbp2_device_type_and_lun;
 387         u32 sbp2_firmware_revision;
 388
 389         /*
 390          * Variable used for logins, reconnects, logouts, query logins
 391          */
 392         atomic_t sbp2_login_complete;
 393
 394         /*
 395          * Pool of command orbs, so we can have more than overlapped command per id
 396          */
 397         spinlock_t sbp2_command_orb_lock;
 398         struct list_head sbp2_command_orb_inuse;
 399         struct list_head sbp2_command_orb_completed;
 400
 401         struct list_head scsi_list;
 402
 403         /* Node entry, as retrieved from NodeMgr entries */
 404         struct node_entry *ne;
 405         struct unit_directory *ud;
 406
 407         /* A backlink to our host_info */
 408         struct sbp2scsi_host_info *hi;
 409
 410         /* SCSI related pointers */
 411         struct scsi_device *sdev;
 412         struct Scsi_Host *scsi_host;
 413
 414         /* Device specific workarounds/brokeness */
 415         u32 workarounds;
 416 };
 417
 418
 419 /* Sbp2 host data structure (one per IEEE1394 host) */
 420 struct sbp2scsi_host_info {
 421         struct hpsb_host *host;         /* IEEE1394 host */
 422         struct list_head scsi_ids;      /* List of scsi ids on this host */
 423 };
 424
 425 /*
 426  * Function prototypes
 427  */
 428
 429 /*
 430  * Various utility prototypes
 431  */
 432 static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id);
 433 static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id);
 434 static struct sbp2_command_info *sbp2util_find_command_for_orb(struct scsi_id_instance_data *scsi_id, dma_addr_t orb);
 435 static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_instance_data *scsi_id, void *SCpnt);
 436 static struct sbp2_command_info *sbp2util_allocate_command_orb(struct scsi_id_instance_data *scsi_id,
 437                                                           struct scsi_cmnd *Current_SCpnt,
 438                                                           void (*Current_done)(struct scsi_cmnd *));
 439 static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id,
 440                 struct sbp2_command_info *command);
 441
 442
 443 static int sbp2_start_device(struct scsi_id_instance_data *scsi_id);
 444 static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id);
 445
 446 #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
 447 static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data,
 448                                      u64 addr, size_t length, u16 flags);
 449 static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data,
 450                                     u64 addr, size_t length, u16 flags);
 451 #endif
 452
 453 /*
 454  * SBP-2 protocol related prototypes
 455  */
 456 static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id);
 457 static int sbp2_login_device(struct scsi_id_instance_data *scsi_id);
 458 static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id);
 459 static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id);
 460 static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid,
 461                                     quadlet_t *data, u64 addr, size_t length, u16 flags);
 462 static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait);
 463 static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
 464                                    struct sbp2_command_info *command,
 465                                    unchar *scsi_cmd,
 466                                    unsigned int scsi_use_sg,
 467                                    unsigned int scsi_request_bufflen,
 468                                    void *scsi_request_buffer,
 469                                    enum dma_data_direction dma_dir);
 470 static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
 471                                  struct sbp2_command_info *command);
 472 static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
 473                              struct scsi_cmnd *SCpnt,
 474                              void (*done)(struct scsi_cmnd *));
 475 static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data);
 476 static void sbp2_check_sbp2_command(struct scsi_id_instance_data *scsi_id, unchar *cmd);
 477 static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
 478                                      struct scsi_cmnd *SCpnt);
 479 static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 480                                       struct unit_directory *ud);
 481 static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id);
 482 static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id);
 483
 484 #endif /* SBP2_H */